ITOUCHHUB

OID symbolic	OID numeric	Type	Access	Description
mib_2	1.3.6.1.2.1
system	1.3.6.1.2.1.1
STR sysDescr	1.3.6.1.2.1.1.1	DisplayString	read-only	A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software. It is mandatory that this only contain printable ASCII characters.
OID sysObjectID	1.3.6.1.2.1.1.2	OBJECT IDENTIFIER	read-only	The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining `what kind of box' is being managed. For example, if vendor `Flintstones, Inc.' was assigned the subtree 1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'.
TIK sysUpTime	1.3.6.1.2.1.1.3	TimeTicks	read-only	The time (in hundredths of a second) since the network management portion of the system was last re-initialized.
STR sysContact	1.3.6.1.2.1.1.4	DisplayString	read-write	The textual identification of the contact person for this managed node, together with information on how to contact this person.
STR sysName	1.3.6.1.2.1.1.5	DisplayString	read-write	An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name.
STR sysLocation	1.3.6.1.2.1.1.6	DisplayString	read-write	The physical location of this node (e.g., `telephone closet, 3rd floor').
INT sysServices	1.3.6.1.2.1.1.7	INTEGER	read-only	A value which indicates the set of services that this entity primarily offers. The value is a sum. This sum initially takes the value zero, Then, for each layer, L, in the range 1 through 7, that this node performs transactions for, 2 raised to (L - 1) is added to the sum. For example, a node which performs primarily routing functions would have a value of 4 (2^(3-1)). In contrast, a node which is a host offering application services would have a value of 72 (2^(4-1) + 2^(7-1)). Note that in the context of the Internet suite of protocols, values should be calculated accordingly: layer functionality 1 physical (e.g., repeaters) 2 datalink/subnetwork (e.g., bridges) 3 internet (e.g., IP gateways) 4 end-to-end (e.g., IP hosts) 7 applications (e.g., mail relays) For systems including OSI protocols, layers 5 and 6 may also be counted.
interfaces	1.3.6.1.2.1.2
INT ifNumber	1.3.6.1.2.1.2.1	INTEGER	read-only	The number of network interfaces (regardless of their current state) present on this system.
ifTable	1.3.6.1.2.1.2.2		not-accessible	A list of interface entries. The number of entries is given by the value of ifNumber.
ifEntry	1.3.6.1.2.1.2.2.1		not-accessible	An interface entry containing objects at the subnetwork layer and below for a particular interface.
INT ifIndex	1.3.6.1.2.1.2.2.1.1	INTEGER	read-only	A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
STR ifDescr	1.3.6.1.2.1.2.2.1.2	DisplayString	read-only	A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the hardware interface.
INT ifType	1.3.6.1.2.1.2.2.1.3	INTEGER	read-only	The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack.
INT ifMtu	1.3.6.1.2.1.2.2.1.4	INTEGER	read-only	The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface.
GAU ifSpeed	1.3.6.1.2.1.2.2.1.5	Gauge	read-only	An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth.
PHY ifPhysAddress	1.3.6.1.2.1.2.2.1.6	PhysAddress	read-only	The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.
INT ifAdminStatus	1.3.6.1.2.1.2.2.1.7	INTEGER	read-write	The desired state of the interface. The testing(3) state indicates that no operational packets can be passed.
INT ifOperStatus	1.3.6.1.2.1.2.2.1.8	INTEGER	read-only	The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed.
TIK ifLastChange	1.3.6.1.2.1.2.2.1.9	TimeTicks	read-only	The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.
CTR ifInOctetsEx	1.3.6.1.2.1.2.2.1.10	Counter	read-only	The total number of octets received on the interface, including framing characters.
CTR ifInUcastPkts	1.3.6.1.2.1.2.2.1.11	Counter	read-only	The number of subnetwork-unicast packets delivered to a higher-layer protocol.
CTR ifInNUcastPkts	1.3.6.1.2.1.2.2.1.12	Counter	read-only	The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.
CTR ifInDiscards	1.3.6.1.2.1.2.2.1.13	Counter	read-only	The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.
CTR ifInErrors	1.3.6.1.2.1.2.2.1.14	Counter	read-only	The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
CTR ifInUnknownProtos	1.3.6.1.2.1.2.2.1.15	Counter	read-only	The number of packets received via the interface which were discarded because of an unknown or unsupported protocol.
CTR ifOutOctets	1.3.6.1.2.1.2.2.1.16	Counter	read-only	The total number of octets transmitted out of the interface, including framing characters.
CTR ifOutUcastPkts	1.3.6.1.2.1.2.2.1.17	Counter	read-only	The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.
CTR ifOutNUcastPkts	1.3.6.1.2.1.2.2.1.18	Counter	read-only	The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent.
CTR ifOutDiscards	1.3.6.1.2.1.2.2.1.19	Counter	read-only	The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.
CTR ifOutErrors	1.3.6.1.2.1.2.2.1.20	Counter	read-only	The number of outbound packets that could not be transmitted because of errors.
GAU ifOutQLen	1.3.6.1.2.1.2.2.1.21	Gauge	read-only	The length of the output packet queue (in packets).
OID ifSpecific	1.3.6.1.2.1.2.2.1.22	OBJECT IDENTIFIER	read-only	A reference to MIB definitions specific to the particular media being used to realize the interface. For example, if the interface is realized by an ethernet, then the value of this object refers to a document defining objects specific to ethernet. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value.
at	1.3.6.1.2.1.3
atTable	1.3.6.1.2.1.3.1		not-accessible	The Address Translation tables contain the NetworkAddress to `physical' address equivalences. Some interfaces do not use translation tables for determining address equivalences (e.g., DDN-X.25 has an algorithmic method); if all interfaces are of this type, then the Address Translation table is empty, i.e., has zero entries.
atEntry	1.3.6.1.2.1.3.1.1		not-accessible	Each entry contains one NetworkAddress to `physical' address equivalence.
INT atIfIndex	1.3.6.1.2.1.3.1.1.1	INTEGER	read-write	The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
PHY atPhysAddress	1.3.6.1.2.1.3.1.1.2	PhysAddress	read-write	The media-dependent `physical' address. Setting this object to a null string (one of zero length) has the effect of invaliding the corresponding entry in the atTable object. That is, it effectively dissasociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant atPhysAddress object.
IP atNetAddress	1.3.6.1.2.1.3.1.1.3	IpAddress	read-write	The NetworkAddress (e.g., the IP address) corresponding to the media-dependent `physical' address.
ip	1.3.6.1.2.1.4
INT ipForwarding	1.3.6.1.2.1.4.1	INTEGER	read-write	The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP gateways forward datagrams. IP hosts do not (except those source-routed via the host). Note that for some managed nodes, this object may take on only a subset of the values possible. Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to change this object to an inappropriate value.
INT ipDefaultTTL	1.3.6.1.2.1.4.2	INTEGER	read-write	The default value inserted into the Time-To-Live field of the IP header of datagrams originated at this entity, whenever a TTL value is not supplied by the transport layer protocol.
CTR ipInReceives	1.3.6.1.2.1.4.3	Counter	read-only	The total number of input datagrams received from interfaces, including those received in error.
CTR ipInHdrErrors	1.3.6.1.2.1.4.4	Counter	read-only	The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, etc.
CTR ipInAddrErrors	1.3.6.1.2.1.4.5	Counter	read-only	The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., 0.0.0.0) and addresses of unsupported Classes (e.g., Class E). For entities which are not IP Gateways and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address.
CTR ipForwDatagrams	1.3.6.1.2.1.4.6	Counter	read-only	The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward them to that final destination. In entities which do not act as IP Gateways, this counter will include only those packets which were Source-Routed via this entity, and the Source- Route option processing was successful.
CTR ipInUnknownProtos	1.3.6.1.2.1.4.7	Counter	read-only	The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol.
CTR ipInDiscards	1.3.6.1.2.1.4.8	Counter	read-only	The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly.
CTR ipInDelivers	1.3.6.1.2.1.4.9	Counter	read-only	The total number of input datagrams successfully delivered to IP user-protocols (including ICMP).
CTR ipOutRequests	1.3.6.1.2.1.4.10	Counter	read-only	The total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipForwDatagrams.
CTR ipOutDiscards	1.3.6.1.2.1.4.11	Counter	read-only	The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in ipForwDatagrams if any such packets met this (discretionary) discard criterion.
CTR ipOutNoRoutes	1.3.6.1.2.1.4.12	Counter	read-only	The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted in ipForwDatagrams which meet this `no-route' criterion. Note that this includes any datagarms which a host cannot route because all of its default gateways are down.
INT ipReasmTimeout	1.3.6.1.2.1.4.13	INTEGER	read-only	The maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity.
CTR ipReasmReqds	1.3.6.1.2.1.4.14	Counter	read-only	The number of IP fragments received which needed to be reassembled at this entity.
CTR ipReasmOKs	1.3.6.1.2.1.4.15	Counter	read-only	The number of IP datagrams successfully re- assembled.
CTR ipReasmFails	1.3.6.1.2.1.4.16	Counter	read-only	The number of failures detected by the IP re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received.
CTR ipFragOKs	1.3.6.1.2.1.4.17	Counter	read-only	The number of IP datagrams that have been successfully fragmented at this entity.
CTR ipFragFails	1.3.6.1.2.1.4.18	Counter	read-only	The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment flag was set.
CTR ipFragCreates	1.3.6.1.2.1.4.19	Counter	read-only	The number of IP datagram fragments that have been generated as a result of fragmentation at this entity.
ipAddrTable	1.3.6.1.2.1.4.20		not-accessible	The table of addressing information relevant to this entity's IP addresses.
ipAddrEntry	1.3.6.1.2.1.4.20.1		not-accessible	The addressing information for one of this entity's IP addresses.
IP ipAdEntAddr	1.3.6.1.2.1.4.20.1.1	IpAddress	read-only	The IP address to which this entry's addressing information pertains.
INT ipAdEntIfIndex	1.3.6.1.2.1.4.20.1.2	INTEGER	read-only	The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
IP ipAdEntNetMask	1.3.6.1.2.1.4.20.1.3	IpAddress	read-only	The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
INT ipAdEntBcastAddr	1.3.6.1.2.1.4.20.1.4	INTEGER	read-only	The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface.
INT ipAdEntReasmMaxSize	1.3.6.1.2.1.4.20.1.5	INTEGER	read-only	The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface.
ipRouteTable	1.3.6.1.2.1.4.21		not-accessible	This entity's IP Routing table.
ipRouteEntry	1.3.6.1.2.1.4.21.1		not-accessible	A route to a particular destination.
IP ipRouteDest	1.3.6.1.2.1.4.21.1.1	IpAddress	read-write	The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use.
INT ipRouteIfIndex	1.3.6.1.2.1.4.21.1.2	INTEGER	read-write	The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
INT ipRouteMetric1	1.3.6.1.2.1.4.21.1.3	INTEGER	read-write	The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
INT ipRouteMetric2	1.3.6.1.2.1.4.21.1.4	INTEGER	read-write	An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
INT ipRouteMetric3	1.3.6.1.2.1.4.21.1.5	INTEGER	read-write	An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
INT ipRouteMetric4	1.3.6.1.2.1.4.21.1.6	INTEGER	read-write	An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
IP ipRouteNextHop	1.3.6.1.2.1.4.21.1.7	IpAddress	read-write	The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.)
INT ipRouteType	1.3.6.1.2.1.4.21.1.8	INTEGER	read-write	The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipRouteTable object. That is, it effectively dissasociates the destination identified with said entry from the route identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipRouteType object.
INT ipRouteProto	1.3.6.1.2.1.4.21.1.9	INTEGER	read-only	The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.
INT ipRouteAge	1.3.6.1.2.1.4.21.1.10	INTEGER	read-write	The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned.
IP ipRouteMask	1.3.6.1.2.1.4.21.1.11	IpAddress	read-write	Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipRouteMask by determining whether the value of the correspondent ipRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.0 class-C If the value of the ipRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism.
INT ipRouteMetric5	1.3.6.1.2.1.4.21.1.12	INTEGER	read-write	An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
OID ipRouteInfo	1.3.6.1.2.1.4.21.1.13	OBJECT IDENTIFIER	read-only	A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the route's ipRouteProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value.
ipNetToMediaTable	1.3.6.1.2.1.4.22		not-accessible	The IP Address Translation table used for mapping from IP addresses to physical addresses.
ipNetToMediaEntry	1.3.6.1.2.1.4.22.1		not-accessible	Each entry contains one IpAddress to `physical' address equivalence.
INT ipNetToMediaIfIndex	1.3.6.1.2.1.4.22.1.1	INTEGER	read-write	The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
PHY ipNetToMediaPhysAddress	1.3.6.1.2.1.4.22.1.2	PhysAddress	read-write	The media-dependent `physical' address.
IP ipNetToMediaNetAddress	1.3.6.1.2.1.4.22.1.3	IpAddress	read-only	The IpAddress corresponding to the media- dependent `physical' address.
INT ipNetToMediaType	1.3.6.1.2.1.4.22.1.4	INTEGER	read-write	The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipNetToMediaTable. That is, it effectively dissasociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipNetToMediaType object.
CTR ipRoutingDiscards	1.3.6.1.2.1.4.23	Counter	read-only	The number of routing entries which were chosen to be discarded even though they are valid. One possible reason for discarding such an entry could be to free-up buffer space for other routing entries.
icmp	1.3.6.1.2.1.5
CTR icmpInMsgs	1.3.6.1.2.1.5.1	Counter	read-only	The total number of ICMP messages which the entity received. Note that this counter includes all those counted by icmpInErrors.
CTR icmpInErrors	1.3.6.1.2.1.5.2	Counter	read-only	The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.).
CTR icmpInDestUnreachs	1.3.6.1.2.1.5.3	Counter	read-only	The number of ICMP Destination Unreachable messages received.
CTR icmpInTimeExcds	1.3.6.1.2.1.5.4	Counter	read-only	The number of ICMP Time Exceeded messages received.
CTR icmpInParmProbs	1.3.6.1.2.1.5.5	Counter	read-only	The number of ICMP Parameter Problem messages received.
CTR icmpInSrcQuenchs	1.3.6.1.2.1.5.6	Counter	read-only	The number of ICMP Source Quench messages received.
CTR icmpInRedirects	1.3.6.1.2.1.5.7	Counter	read-only	The number of ICMP Redirect messages received.
CTR icmpInEchos	1.3.6.1.2.1.5.8	Counter	read-only	The number of ICMP Echo (request) messages received.
CTR icmpInEchoReps	1.3.6.1.2.1.5.9	Counter	read-only	The number of ICMP Echo Reply messages received.
CTR icmpInTimestamps	1.3.6.1.2.1.5.10	Counter	read-only	The number of ICMP Timestamp (request) messages received.
CTR icmpInTimestampReps	1.3.6.1.2.1.5.11	Counter	read-only	The number of ICMP Timestamp Reply messages received.
CTR icmpInAddrMasks	1.3.6.1.2.1.5.12	Counter	read-only	The number of ICMP Address Mask Request messages received.
CTR icmpInAddrMaskReps	1.3.6.1.2.1.5.13	Counter	read-only	The number of ICMP Address Mask Reply messages received.
CTR icmpOutMsgs	1.3.6.1.2.1.5.14	Counter	read-only	The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by icmpOutErrors.
CTR icmpOutErrors	1.3.6.1.2.1.5.15	Counter	read-only	The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of IP to route the resultant datagram. In some implementations there may be no types of error which contribute to this counter's value.
CTR icmpOutDestUnreachs	1.3.6.1.2.1.5.16	Counter	read-only	The number of ICMP Destination Unreachable messages sent.
CTR icmpOutTimeExcds	1.3.6.1.2.1.5.17	Counter	read-only	The number of ICMP Time Exceeded messages sent.
CTR icmpOutParmProbs	1.3.6.1.2.1.5.18	Counter	read-only	The number of ICMP Parameter Problem messages sent.
CTR icmpOutSrcQuenchs	1.3.6.1.2.1.5.19	Counter	read-only	The number of ICMP Source Quench messages sent.
CTR icmpOutRedirects	1.3.6.1.2.1.5.20	Counter	read-only	The number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects.
CTR icmpOutEchos	1.3.6.1.2.1.5.21	Counter	read-only	The number of ICMP Echo (request) messages sent.
CTR icmpOutEchoReps	1.3.6.1.2.1.5.22	Counter	read-only	The number of ICMP Echo Reply messages sent.
CTR icmpOutTimestamps	1.3.6.1.2.1.5.23	Counter	read-only	The number of ICMP Timestamp (request) messages sent.
CTR icmpOutTimestampReps	1.3.6.1.2.1.5.24	Counter	read-only	The number of ICMP Timestamp Reply messages sent.
CTR icmpOutAddrMasks	1.3.6.1.2.1.5.25	Counter	read-only	The number of ICMP Address Mask Request messages sent.
CTR icmpOutAddrMaskReps	1.3.6.1.2.1.5.26	Counter	read-only	The number of ICMP Address Mask Reply messages sent.
tcp	1.3.6.1.2.1.6
INT tcpRtoAlgorithm	1.3.6.1.2.1.6.1	INTEGER	read-only	The algorithm used to determine the timeout value used for retransmitting unacknowledged octets.
INT tcpRtoMin	1.3.6.1.2.1.6.2	INTEGER	read-only	The minimum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission timeout. In particular, when the timeout algorithm is rsre(3), an object of this type has the semantics of the LBOUND quantity described in RFC 793.
INT tcpRtoMax	1.3.6.1.2.1.6.3	INTEGER	read-only	The maximum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission timeout. In particular, when the timeout algorithm is rsre(3), an object of this type has the semantics of the UBOUND quantity described in RFC 793.
INT tcpMaxConn	1.3.6.1.2.1.6.4	INTEGER	read-only	The limit on the total number of TCP connections the entity can support. In entities where the maximum number of connections is dynamic, this object should contain the value -1.
CTR tcpActiveOpens	1.3.6.1.2.1.6.5	Counter	read-only	The number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSED state.
CTR tcpPassiveOpens	1.3.6.1.2.1.6.6	Counter	read-only	The number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state.
CTR tcpAttemptFails	1.3.6.1.2.1.6.7	Counter	read-only	The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state.
CTR tcpEstabResets	1.3.6.1.2.1.6.8	Counter	read-only	The number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state.
GAU tcpCurrEstab	1.3.6.1.2.1.6.9	Gauge	read-only	The number of TCP connections for which the current state is either ESTABLISHED or CLOSE- WAIT.
CTR tcpInSegs	1.3.6.1.2.1.6.10	Counter	read-only	The total number of segments received, including those received in error. This count includes segments received on currently established connections.
CTR tcpOutSegs	1.3.6.1.2.1.6.11	Counter	read-only	The total number of segments sent, including those on current connections but excluding those containing only retransmitted octets.
CTR tcpRetransSegs	1.3.6.1.2.1.6.12	Counter	read-only	The total number of segments retransmitted - that is, the number of TCP segments transmitted containing one or more previously transmitted octets.
tcpConnTable	1.3.6.1.2.1.6.13		not-accessible	A table containing TCP connection-specific information.
tcpConnEntry	1.3.6.1.2.1.6.13.1		not-accessible	Information about a particular current TCP connection. An object of this type is transient, in that it ceases to exist when (or soon after) the connection makes the transition to the CLOSED state.
INT tcpConnState	1.3.6.1.2.1.6.13.1.1	INTEGER	read-write	The state of this TCP connection. The only value which may be set by a management station is deleteTCB(12). Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to set this object to any other value. If a management station sets this object to the value deleteTCB(12), then this has the effect of deleting the TCB (as defined in RFC 793) of the corresponding connection on the managed node, resulting in immediate termination of the connection. As an implementation-specific option, a RST segment may be sent from the managed node to the other TCP endpoint (note however that RST segments are not sent reliably).
IP tcpConnLocalAddress	1.3.6.1.2.1.6.13.1.2	IpAddress	read-only	The local IP address for this TCP connection. In the case of a connection in the listen state which is willing to accept connections for any IP interface associated with the node, the value 0.0.0.0 is used.
INT tcpConnLocalPort	1.3.6.1.2.1.6.13.1.3	INTEGER	read-only	The local port number for this TCP connection.
IP tcpConnRemAddress	1.3.6.1.2.1.6.13.1.4	IpAddress	read-only	The remote IP address for this TCP connection.
INT tcpConnRemPort	1.3.6.1.2.1.6.13.1.5	INTEGER	read-only	The remote port number for this TCP connection.
CTR tcpInErrs	1.3.6.1.2.1.6.14	Counter	read-only	The total number of segments received in error (e.g., bad TCP checksums).
CTR tcpOutRsts	1.3.6.1.2.1.6.15	Counter	read-only	The number of TCP segments sent containing the RST flag.
udp	1.3.6.1.2.1.7
CTR udpInDatagrams	1.3.6.1.2.1.7.1	Counter	read-only	The total number of UDP datagrams delivered to UDP users.
CTR udpNoPorts	1.3.6.1.2.1.7.2	Counter	read-only	The total number of received UDP datagrams for which there was no application at the destination port.
CTR udpInErrors	1.3.6.1.2.1.7.3	Counter	read-only	The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port.
CTR udpOutDatagrams	1.3.6.1.2.1.7.4	Counter	read-only	The total number of UDP datagrams sent from this entity.
udpTable	1.3.6.1.2.1.7.5		not-accessible	A table containing UDP listener information.
udpEntry	1.3.6.1.2.1.7.5.1		not-accessible	Information about a particular current UDP listener.
IP udpLocalAddress	1.3.6.1.2.1.7.5.1.1	IpAddress	read-only	The local IP address for this UDP listener. In the case of a UDP listener which is willing to accept datagrams for any IP interface associated with the node, the value 0.0.0.0 is used.
INT udpLocalPort	1.3.6.1.2.1.7.5.1.2	INTEGER	read-only	The local port number for this UDP listener.
egp	1.3.6.1.2.1.8
CTR egpInMsgs	1.3.6.1.2.1.8.1	Counter	read-only	The number of EGP messages received without error.
CTR egpInErrors	1.3.6.1.2.1.8.2	Counter	read-only	The number of EGP messages received that proved to be in error.
CTR egpOutMsgs	1.3.6.1.2.1.8.3	Counter	read-only	The total number of locally generated EGP messages.
CTR egpOutErrors	1.3.6.1.2.1.8.4	Counter	read-only	The number of locally generated EGP messages not sent due to resource limitations within an EGP entity.
egpNeighTable	1.3.6.1.2.1.8.5		not-accessible	The EGP neighbor table.
egpNeighEntry	1.3.6.1.2.1.8.5.1		not-accessible	Information about this entity's relationship with a particular EGP neighbor.
INT egpNeighState	1.3.6.1.2.1.8.5.1.1	INTEGER	read-only	The EGP state of the local system with respect to this entry's EGP neighbor. Each EGP state is represented by a value that is one greater than the numerical value associated with said state in RFC 904.
IP egpNeighAddr	1.3.6.1.2.1.8.5.1.2	IpAddress	read-only	The IP address of this entry's EGP neighbor.
INT egpNeighAs	1.3.6.1.2.1.8.5.1.3	INTEGER	read-only	The autonomous system of this EGP peer. Zero should be specified if the autonomous system number of the neighbor is not yet known.
CTR egpNeighInMsgs	1.3.6.1.2.1.8.5.1.4	Counter	read-only	The number of EGP messages received without error from this EGP peer.
CTR egpNeighInErrs	1.3.6.1.2.1.8.5.1.5	Counter	read-only	The number of EGP messages received from this EGP peer that proved to be in error (e.g., bad EGP checksum).
CTR egpNeighOutMsgs	1.3.6.1.2.1.8.5.1.6	Counter	read-only	The number of locally generated EGP messages to this EGP peer.
CTR egpNeighOutErrs	1.3.6.1.2.1.8.5.1.7	Counter	read-only	The number of locally generated EGP messages not sent to this EGP peer due to resource limitations within an EGP entity.
CTR egpNeighInErrMsgs	1.3.6.1.2.1.8.5.1.8	Counter	read-only	The number of EGP-defined error messages received from this EGP peer.
CTR egpNeighOutErrMsgs	1.3.6.1.2.1.8.5.1.9	Counter	read-only	The number of EGP-defined error messages sent to this EGP peer.
CTR egpNeighStateUps	1.3.6.1.2.1.8.5.1.10	Counter	read-only	The number of EGP state transitions to the UP state with this EGP peer.
CTR egpNeighStateDowns	1.3.6.1.2.1.8.5.1.11	Counter	read-only	The number of EGP state transitions from the UP state to any other state with this EGP peer.
INT egpNeighIntervalHello	1.3.6.1.2.1.8.5.1.12	INTEGER	read-only	The interval between EGP Hello command retransmissions (in hundredths of a second). This represents the t1 timer as defined in RFC 904.
INT egpNeighIntervalPoll	1.3.6.1.2.1.8.5.1.13	INTEGER	read-only	The interval between EGP poll command retransmissions (in hundredths of a second). This represents the t3 timer as defined in RFC 904.
INT egpNeighMode	1.3.6.1.2.1.8.5.1.14	INTEGER	read-only	The polling mode of this EGP entity, either passive or active.
INT egpNeighEventTrigger	1.3.6.1.2.1.8.5.1.15	INTEGER	read-write	A control variable used to trigger operator- initiated Start and Stop events. When read, this variable always returns the most recent value that egpNeighEventTrigger was set to. If it has not been set since the last initialization of the network management subsystem on the node, it returns a value of `stop'. When set, this variable causes a Start or Stop event on the specified neighbor, as specified on pages 8-10 of RFC 904. Briefly, a Start event causes an Idle peer to begin neighbor acquisition and a non-Idle peer to reinitiate neighbor acquisition. A stop event causes a non-Idle peer to return to the Idle state until a Start event occurs, either via egpNeighEventTrigger or otherwise.
INT egpAs	1.3.6.1.2.1.8.6	INTEGER	read-only	The autonomous system number of this EGP entity.
transmission	1.3.6.1.2.1.10
x25	1.3.6.1.2.1.10.5
NTF x25Restart	1.3.6.1.2.1.10.5.0.1			This trap means the X.25 PLE sent or received a restart packet. The restart that brings up the link should not send a x25Restart trap so the interface should send a linkUp trap. Sending this trap means the agent does not send a linkDown and linkUp trap.
NTF x25Reset	1.3.6.1.2.1.10.5.0.2			If the PLE sends or receives a reset, the agent should send an x25Reset trap.
x25AdmnTable	1.3.6.1.2.1.10.5.1		not-accessible	This table contains the administratively set configuration parameters for an X.25 Packet Level Entity (PLE). Most of the objects in this table have corresponding objects in the x25OperTable. This table contains the values as last set by the administrator. The x25OperTable contains the values actually in use by an X.25 PLE. Changing an administrative value may or may not change a current operating value. The operating value may not change until the interface is restarted. Some implementations may change the values immediately upon changing the administrative table. All implementations are required to load the values from the administrative table when initializing a PLE.
x25AdmnEntry	1.3.6.1.2.1.10.5.1.1		not-accessible	Entries of x25AdmnTable.
IFI x25AdmnIndex	1.3.6.1.2.1.10.5.1.1.1	IfIndexType	read-only	The ifIndex value for the X.25 Interface.
INT x25AdmnInterfaceMode	1.3.6.1.2.1.10.5.1.1.2	INTEGER	read-write	Identifies DCE/DTE mode in which the interface operates. A value of dxe indicates the mode will be determined by XID negotiation.
INT x25AdmnMaxActiveCircuits	1.3.6.1.2.1.10.5.1.1.3	INTEGER	read-write	The maximum number of circuits this PLE can support; including PVCs.
INT x25AdmnPacketSequencing	1.3.6.1.2.1.10.5.1.1.4	INTEGER	read-write	The modulus of the packet sequence number space.
NUM x25AdmnRestartTimer	1.3.6.1.2.1.10.5.1.1.5	PositiveInteger	read-write	The T20 restart timer in milliseconds.
NUM x25AdmnCallTimer	1.3.6.1.2.1.10.5.1.1.6	PositiveInteger	read-write	The T21 Call timer in milliseconds.
NUM x25AdmnResetTimer	1.3.6.1.2.1.10.5.1.1.7	PositiveInteger	read-write	The T22 Reset timer in milliseconds.
NUM x25AdmnClearTimer	1.3.6.1.2.1.10.5.1.1.8	PositiveInteger	read-write	The T23 Clear timer in milliseconds.
NUM x25AdmnWindowTimer	1.3.6.1.2.1.10.5.1.1.9	PositiveInteger	read-write	The T24 window status transmission timer in milliseconds. A value of 2147483647 indicates no window timer in use.
NUM x25AdmnDataRxmtTimer	1.3.6.1.2.1.10.5.1.1.10	PositiveInteger	read-write	The T25 data retransmission timer in milliseconds. A value of 2147483647 indicates no data retransmission timer in use.
NUM x25AdmnInterruptTimer	1.3.6.1.2.1.10.5.1.1.11	PositiveInteger	read-write	The T26 interrupt timer in milliseconds. A value of 2147483647 indicates no interrupt timer in use.
NUM x25AdmnRejectTimer	1.3.6.1.2.1.10.5.1.1.12	PositiveInteger	read-write	The T27 Reject retransmission timer in milliseconds. A value of 2147483647 indicates no reject timer in use.
NUM x25AdmnRegistrationRequestTimer	1.3.6.1.2.1.10.5.1.1.13	PositiveInteger	read-write	The T28 registration timer in milliseconds. A value of 2147483647 indicates no registration timer in use.
NUM x25AdmnMinimumRecallTimer	1.3.6.1.2.1.10.5.1.1.14	PositiveInteger	read-write	Minimum time interval between unsuccessful call attempts in milliseconds.
INT x25AdmnRestartCount	1.3.6.1.2.1.10.5.1.1.15	INTEGER	read-write	The R20 restart retransmission count.
INT x25AdmnResetCount	1.3.6.1.2.1.10.5.1.1.16	INTEGER	read-write	The r22 Reset retransmission count.
INT x25AdmnClearCount	1.3.6.1.2.1.10.5.1.1.17	INTEGER	read-write	The r23 Clear retransmission count.
INT x25AdmnDataRxmtCount	1.3.6.1.2.1.10.5.1.1.18	INTEGER	read-write	The R25 Data retransmission count. This value is irrelevant if the x25AdmnDataRxmtTimer indicates no timer in use.
INT x25AdmnRejectCount	1.3.6.1.2.1.10.5.1.1.19	INTEGER	read-write	The R27 reject retransmission count. This value is irrelevant if the x25AdmnRejectTimer indicates no timer in use.
INT x25AdmnRegistrationRequestCount	1.3.6.1.2.1.10.5.1.1.20	INTEGER	read-write	The R28 Registration retransmission Count. This value is irrelevant if the x25AdmnRegistrationRequestTimer indicates no timer in use.
INT x25AdmnNumberPVCs	1.3.6.1.2.1.10.5.1.1.21	INTEGER	read-write	The number of PVC configured for this PLE. The PVCs use channel numbers from 1 to this number.
OID x25AdmnDefCallParamId	1.3.6.1.2.1.10.5.1.1.22	OBJECT IDENTIFIER	read-write	This identifies the instance of the x25CallParmIndex for the entry in the x25CallParmTable which contains the default call parameters for this PLE.
ADR x25AdmnLocalAddress	1.3.6.1.2.1.10.5.1.1.23	X121Address	read-write	The local address for this PLE subnetwork. A zero length address maybe returned by PLEs that only support PVCs.
OID x25AdmnProtocolVersionSupported	1.3.6.1.2.1.10.5.1.1.24	OBJECT IDENTIFIER	read-write	Identifies the version of the X.25 protocol this interface should support. Object identifiers for common versions are defined below in the x25ProtocolVersion subtree.
x25OperTable	1.3.6.1.2.1.10.5.2		not-accessible	The operation parameters in use by the X.25 PLE.
x25OperEntry	1.3.6.1.2.1.10.5.2.1		not-accessible	Entries of x25OperTable.
IFI x25OperIndex	1.3.6.1.2.1.10.5.2.1.1	IfIndexType	read-only	The ifIndex value for the X.25 interface.
INT x25OperInterfaceMode	1.3.6.1.2.1.10.5.2.1.2	INTEGER	read-only	Identifies DCE/DTE mode in which the interface operates. A value of dxe indicates the role will be determined by XID negotiation at the Link Layer and that negotiation has not yet taken place.
INT x25OperMaxActiveCircuits	1.3.6.1.2.1.10.5.2.1.3	INTEGER	read-only	Maximum number of circuits this PLE can support.
INT x25OperPacketSequencing	1.3.6.1.2.1.10.5.2.1.4	INTEGER	read-only	The modulus of the packet sequence number space.
NUM x25OperRestartTimer	1.3.6.1.2.1.10.5.2.1.5	PositiveInteger	read-only	The T20 restart timer in milliseconds.
NUM x25OperCallTimer	1.3.6.1.2.1.10.5.2.1.6	PositiveInteger	read-only	The T21 Call timer in milliseconds.
NUM x25OperResetTimer	1.3.6.1.2.1.10.5.2.1.7	PositiveInteger	read-only	The T22 Reset timer in milliseconds.
NUM x25OperClearTimer	1.3.6.1.2.1.10.5.2.1.8	PositiveInteger	read-only	The T23 Clear timer in milliseconds.
NUM x25OperWindowTimer	1.3.6.1.2.1.10.5.2.1.9	PositiveInteger	read-only	The T24 window status transmission timer milliseconds. A value of 2147483647 indicates no window timer in use.
NUM x25OperDataRxmtTimer	1.3.6.1.2.1.10.5.2.1.10	PositiveInteger	read-only	The T25 Data Retransmission timer in milliseconds. A value of 2147483647 indicates no data retransmission timer in use.
NUM x25OperInterruptTimer	1.3.6.1.2.1.10.5.2.1.11	PositiveInteger	read-only	The T26 Interrupt timer in milliseconds. A value of 2147483647 indicates interrupts are not being used.
NUM x25OperRejectTimer	1.3.6.1.2.1.10.5.2.1.12	PositiveInteger	read-only	The T27 Reject retransmission timer in milliseconds. A value of 2147483647 indicates no reject timer in use.
NUM x25OperRegistrationRequestTimer	1.3.6.1.2.1.10.5.2.1.13	PositiveInteger	read-only	The T28 registration timer in milliseconds. A value of 2147483647 indicates no registration timer in use.
NUM x25OperMinimumRecallTimer	1.3.6.1.2.1.10.5.2.1.14	PositiveInteger	read-only	Minimum time interval between unsuccessful call attempts in milliseconds.
INT x25OperRestartCount	1.3.6.1.2.1.10.5.2.1.15	INTEGER	read-only	The R20 restart retransmission count.
INT x25OperResetCount	1.3.6.1.2.1.10.5.2.1.16	INTEGER	read-only	The r22 Reset retransmission count.
INT x25OperClearCount	1.3.6.1.2.1.10.5.2.1.17	INTEGER	read-only	The r23 Clear retransmission count.
INT x25OperDataRxmtCount	1.3.6.1.2.1.10.5.2.1.18	INTEGER	read-only	The R25 Data retransmission count. This value is undefined if the x25OperDataRxmtTimer indicates no timer in use.
INT x25OperRejectCount	1.3.6.1.2.1.10.5.2.1.19	INTEGER	read-only	The R27 reject retransmission count. This value is undefined if the x25OperRejectTimer indicates no timer in use.
INT x25OperRegistrationRequestCount	1.3.6.1.2.1.10.5.2.1.20	INTEGER	read-only	The R28 Registration retransmission Count. This value is undefined if the x25OperREgistrationRequestTimer indicates no timer in use.
INT x25OperNumberPVCs	1.3.6.1.2.1.10.5.2.1.21	INTEGER	read-only	The number of PVC configured for this PLE. The PVCs use channel numbers from 1 to this number.
OID x25OperDefCallParamId	1.3.6.1.2.1.10.5.2.1.22	OBJECT IDENTIFIER	read-only	This identifies the instance of the x25CallParmIndex for the entry in the x25CallParmTable that contains the default call parameters for this PLE.
ADR x25OperLocalAddress	1.3.6.1.2.1.10.5.2.1.23	X121Address	read-only	The local address for this PLE subnetwork. A zero length address maybe returned by PLEs that only support PVCs.
OID x25OperDataLinkId	1.3.6.1.2.1.10.5.2.1.24	OBJECT IDENTIFIER	read-only	This identifies the instance of the index object in the first table of the most device specific MIB for the interface used by this PLE.
OID x25OperProtocolVersionSupported	1.3.6.1.2.1.10.5.2.1.25	OBJECT IDENTIFIER	read-only	Identifies the version of the X.25 protocol this interface supports. Object identifiers for common versions are defined below in the x25ProtocolVersion subtree.
x25StatTable	1.3.6.1.2.1.10.5.3		not-accessible	Statistics information about this X.25 PLE.
x25StatEntry	1.3.6.1.2.1.10.5.3.1		not-accessible	Entries of the x25StatTable.
IFI x25StatIndex	1.3.6.1.2.1.10.5.3.1.1	IfIndexType	read-only	The ifIndex value for the X.25 interface.
CTR x25StatInCalls	1.3.6.1.2.1.10.5.3.1.2	Counter	read-only	The number of incoming calls received.
CTR x25StatInCallRefusals	1.3.6.1.2.1.10.5.3.1.3	Counter	read-only	The number of incoming calls refused. This includes calls refused by the PLE and by higher layers. This also includes calls cleared because of restricted fast select.
CTR x25StatInProviderInitiatedClears	1.3.6.1.2.1.10.5.3.1.4	Counter	read-only	The number of clear requests with a cause code other than DTE initiated.
CTR x25StatInRemotelyInitiatedResets	1.3.6.1.2.1.10.5.3.1.5	Counter	read-only	The number of reset requests received with cause code DTE initiated.
CTR x25StatInProviderInitiatedResets	1.3.6.1.2.1.10.5.3.1.6	Counter	read-only	The number of reset requests received with cause code other than DTE initiated.
CTR x25StatInRestarts	1.3.6.1.2.1.10.5.3.1.7	Counter	read-only	The number of remotely initiated (including provider initiated) restarts experienced by the PLE excluding the restart associated with bringing up the PLE interface. This only counts restarts received when the PLE already has an established connection with the remove PLE.
CTR x25StatInDataPackets	1.3.6.1.2.1.10.5.3.1.8	Counter	read-only	The number of data packets received.
CTR x25StatInAccusedOfProtocolErrors	1.3.6.1.2.1.10.5.3.1.9	Counter	read-only	The number of packets received containing a procedure error cause code. These include clear, reset, restart, or diagnostic packets.
CTR x25StatInInterrupts	1.3.6.1.2.1.10.5.3.1.10	Counter	read-only	The number of interrupt packets received by the PLE or over the PVC/VC.
CTR x25StatOutCallAttempts	1.3.6.1.2.1.10.5.3.1.11	Counter	read-only	The number of calls attempted.
CTR x25StatOutCallFailures	1.3.6.1.2.1.10.5.3.1.12	Counter	read-only	The number of call attempts which failed. This includes calls that were cleared because of restrictive fast select.
CTR x25StatOutInterrupts	1.3.6.1.2.1.10.5.3.1.13	Counter	read-only	The number of interrupt packets send by the PLE or over the PVC/VC.
CTR x25StatOutDataPackets	1.3.6.1.2.1.10.5.3.1.14	Counter	read-only	The number of data packets sent by this PLE.
GAU x25StatOutgoingCircuits	1.3.6.1.2.1.10.5.3.1.15	Gauge	read-only	The number of active outgoing circuits. This includes call requests sent but not yet confirmed. This does not count PVCs.
GAU x25StatIncomingCircuits	1.3.6.1.2.1.10.5.3.1.16	Gauge	read-only	The number of active Incoming Circuits. This includes call indications received but not yet acknowledged. This does not count PVCs.
GAU x25StatTwowayCircuits	1.3.6.1.2.1.10.5.3.1.17	Gauge	read-only	The number of active two-way Circuits. This includes call requests sent but not yet confirmed. This does not count PVCs.
CTR x25StatRestartTimeouts	1.3.6.1.2.1.10.5.3.1.18	Counter	read-only	The number of times the T20 restart timer expired.
CTR x25StatCallTimeouts	1.3.6.1.2.1.10.5.3.1.19	Counter	read-only	The number of times the T21 call timer expired.
CTR x25StatResetTimeouts	1.3.6.1.2.1.10.5.3.1.20	Counter	read-only	The number of times the T22 reset timer expired.
CTR x25StatClearTimeouts	1.3.6.1.2.1.10.5.3.1.21	Counter	read-only	The number of times the T23 clear timer expired.
CTR x25StatDataRxmtTimeouts	1.3.6.1.2.1.10.5.3.1.22	Counter	read-only	The number of times the T25 data timer expired.
CTR x25StatInterruptTimeouts	1.3.6.1.2.1.10.5.3.1.23	Counter	read-only	The number of times the T26 interrupt timer expired.
CTR x25StatRetryCountExceededs	1.3.6.1.2.1.10.5.3.1.24	Counter	read-only	The number of times a retry counter was exhausted.
CTR x25StatClearCountExceededs	1.3.6.1.2.1.10.5.3.1.25	Counter	read-only	The number of times the R23 clear count was exceeded.
x25ChannelTable	1.3.6.1.2.1.10.5.4		not-accessible	These objects contain information about the channel number configuration in an X.25 PLE. These values are the configured values. changes in these values after the interfaces has started may not be reflected in the operating PLE.
x25ChannelEntry	1.3.6.1.2.1.10.5.4.1		not-accessible	Entries of x25ChannelTable.
IFI x25ChannelIndex	1.3.6.1.2.1.10.5.4.1.1	IfIndexType	read-only	The ifIndex value for the X.25 Interface.
INT x25ChannelLIC	1.3.6.1.2.1.10.5.4.1.2	INTEGER	read-write	Lowest Incoming channel.
INT x25ChannelHIC	1.3.6.1.2.1.10.5.4.1.3	INTEGER	read-write	Highest Incoming channel. A value of zero indicates no channels in this range.
INT x25ChannelLTC	1.3.6.1.2.1.10.5.4.1.4	INTEGER	read-write	Lowest Two-way channel.
INT x25ChannelHTC	1.3.6.1.2.1.10.5.4.1.5	INTEGER	read-write	Highest Two-way channel. A value of zero indicates no channels in this range.
INT x25ChannelLOC	1.3.6.1.2.1.10.5.4.1.6	INTEGER	read-write	Lowest outgoing channel.
INT x25ChannelHOC	1.3.6.1.2.1.10.5.4.1.7	INTEGER	read-write	Highest outgoing channel. A value of zero indicates no channels in this range.
x25CircuitTable	1.3.6.1.2.1.10.5.5		not-accessible	These objects contain general information about a specific circuit of an X.25 PLE.
x25CircuitEntry	1.3.6.1.2.1.10.5.5.1		not-accessible	Entries of x25CircuitTable.
IFI x25CircuitIndex	1.3.6.1.2.1.10.5.5.1.1	IfIndexType	read-only	The ifIndex value for the X.25 Interface.
INT x25CircuitChannel	1.3.6.1.2.1.10.5.5.1.2	INTEGER	read-only	The channel number for this circuit.
INT x25CircuitStatus	1.3.6.1.2.1.10.5.5.1.3	INTEGER	read-write	This object reports the current status of the circuit. An existing instance of this object can only be set to startClear, startPvcResetting, or invalid. An instance with the value calling or open can only be set to startClear and that action will start clearing the circuit. An instance with the value PVC can only be set to startPvcResetting or invalid and that action resets the PVC or deletes the circuit respectively. The values startClear or startPvcResetting will never be returned by an agent. An attempt to set the status of an existing instance to a value other than one of these values will result in an error. A non-existing instance can be set to PVC to create a PVC if the implementation supports dynamic creation of PVCs. Some implementations may only allow creation and deletion of PVCs if the interface is down. Since the instance identifier will supply the PLE index and the channel number, setting this object alone supplies sufficient information to create the instance. All the DEFVAL clauses for the other objects of this table are appropriate for creating a PVC; PLEs creating entries for placed or accepted calls will use values appropriate for the call rather than the value of the DEFVAL clause. Two managers trying to create the same PVC can determine from the return code which manager succeeded and which failed (the failing manager fails because it can not set a value of PVC for an existing object). An entry in the closed or invalid state may be deleted or reused at the agent's convence. If the entry is kept in the closed state, the values of the parameters associated with the entry must be correct. Closed implies the values in the circuit table are correct. The value of invalid indicates the other values in the table are invalid. Many agents may never return a value of invalid because they dynamically allocate and free unused table entries. An agent for a statically configured systems can return invalid to indicate the entry has not yet been used so the counters contain no information.
TIK x25CircuitEstablishTime	1.3.6.1.2.1.10.5.5.1.4	TimeTicks	read-only	The value of sysUpTime when the channel was associated with this circuit. For outgoing SVCs, this is the time the first call packet was sent. For incoming SVCs, this is the time the call indication was received. For PVCs this is the time the PVC was able to pass data to a higher layer entity without loss of data.
INT x25CircuitDirection	1.3.6.1.2.1.10.5.5.1.5	INTEGER	read-write	The direction of the call that established this circuit.
CTR x25CircuitInOctets	1.3.6.1.2.1.10.5.5.1.6	Counter	read-only	The number of octets of user data delivered to upper layer.
CTR x25CircuitInPdus	1.3.6.1.2.1.10.5.5.1.7	Counter	read-only	The number of PDUs received for this circuit.
CTR x25CircuitInRemotelyInitiatedResets	1.3.6.1.2.1.10.5.5.1.8	Counter	read-only	The number of Resets received for this circuit with cause code of DTE initiated.
CTR x25CircuitInProviderInitiatedResets	1.3.6.1.2.1.10.5.5.1.9	Counter	read-only	The number of Resets received for this circuit with cause code other than DTE initiated.
CTR x25CircuitInInterrupts	1.3.6.1.2.1.10.5.5.1.10	Counter	read-only	The number of interrupt packets received for this circuit.
CTR x25CircuitOutOctets	1.3.6.1.2.1.10.5.5.1.11	Counter	read-only	The number of octets of user data sent for this circuit.
CTR x25CircuitOutPdus	1.3.6.1.2.1.10.5.5.1.12	Counter	read-only	The number of PDUs sent for this circuit.
CTR x25CircuitOutInterrupts	1.3.6.1.2.1.10.5.5.1.13	Counter	read-only	The number of interrupt packets sent on this circuit.
CTR x25CircuitDataRetransmissionTimeouts	1.3.6.1.2.1.10.5.5.1.14	Counter	read-only	The number of times the T25 data retransmission timer expired for this circuit.
CTR x25CircuitResetTimeouts	1.3.6.1.2.1.10.5.5.1.15	Counter	read-only	The number of times the T22 reset timer expired for this circuit.
CTR x25CircuitInterruptTimeouts	1.3.6.1.2.1.10.5.5.1.16	Counter	read-only	The number of times the T26 Interrupt timer expired for this circuit.
OID x25CircuitCallParamId	1.3.6.1.2.1.10.5.5.1.17	OBJECT IDENTIFIER	read-write	This identifies the instance of the x25CallParmIndex for the entry in the x25CallParmTable which contains the call parameters in use with this circuit. The entry referenced must contain the values that are currently in use by the circuit rather than proposed values. A value of NULL indicates the circuit is a PVC or is using all the default parameters.
ADR x25CircuitCalledDteAddress	1.3.6.1.2.1.10.5.5.1.18	X121Address	read-write	For incoming calls, this is the called address from the call indication packet. For outgoing calls, this is the called address from the call confirmation packet. This will be zero length for PVCs.
ADR x25CircuitCallingDteAddress	1.3.6.1.2.1.10.5.5.1.19	X121Address	read-write	For incoming calls, this is the calling address from the call indication packet. For outgoing calls, this is the calling address from the call confirmation packet. This will be zero length for PVCs.
ADR x25CircuitOriginallyCalledAddress	1.3.6.1.2.1.10.5.5.1.20	X121Address	read-write	For incoming calls, this is the address in the call Redirection or Call Deflection Notification facility if the call was deflected or redirected, otherwise it will be called address from the call indication packet. For outgoing calls, this is the address from the call request packet. This will be zero length for PVCs.
STR x25CircuitDescr	1.3.6.1.2.1.10.5.5.1.21	DisplayString	read-write	A descriptive string associated with this circuit. This provides a place for the agent to supply any descriptive information it knows about the use or owner of the circuit. The agent may return the process identifier and user name for the process using the circuit. Alternative the agent may return the name of the configuration entry that caused a bridge to establish the circuit. A zero length value indicates the agent doesn't have any additional information.
NUM x25ClearedCircuitEntriesRequested	1.3.6.1.2.1.10.5.6	PositiveInteger	read-write	The requested number of entries for the agent to keep in the x25ClearedCircuit table.
NUM x25ClearedCircuitEntriesGranted	1.3.6.1.2.1.10.5.7	PositiveInteger	read-only	The actual number of entries the agent will keep in the x25ClearedCircuit Table.
x25ClearedCircuitTable	1.3.6.1.2.1.10.5.8		not-accessible	A table of entries about closed circuits. Entries must be made in this table whenever circuits are closed and the close request or close indication packet contains a clearing cause other than DTE Originated or a Diagnostic code field other than Higher Layer Initiated disconnection-normal. An agent may optionally make entries for normal closes (to record closing facilities or other information). Agents will delete the oldest entry in the table when adding a new entry would exceed agent resources. Agents are required to keep the last entry put in the table and may keep more entries. The object x25OperClearEntriesGranted returns the maximum number of entries kept in the table.
x25ClearedCircuitEntry	1.3.6.1.2.1.10.5.8.1		not-accessible	Information about a cleared circuit.
NUM x25ClearedCircuitIndex	1.3.6.1.2.1.10.5.8.1.1	PositiveInteger	read-only	An index that uniquely distinguishes one entry in the clearedCircuitTable from another. This index will start at 2147483647 and will decrease by one for each new entry added to the table. Upon reaching one, the index will reset to 2147483647. Because the index starts at 2147483647 and decreases, a manager may do a getnext on entry zero and obtain the most recent entry. When the index has the value of 1, the next entry will delete all entries in the table and that entry will be numbered 2147483647.
IFI x25ClearedCircuitPleIndex	1.3.6.1.2.1.10.5.8.1.2	IfIndexType	read-only	The value of ifIndex for the PLE which cleared the circuit that created the entry.
TIK x25ClearedCircuitTimeEstablished	1.3.6.1.2.1.10.5.8.1.3	TimeTicks	read-only	The value of sysUpTime when the circuit was established. This will be the same value that was in the x25CircuitEstablishTime for the circuit.
TIK x25ClearedCircuitTimeCleared	1.3.6.1.2.1.10.5.8.1.4	TimeTicks	read-only	The value of sysUpTime when the circuit was cleared. For locally initiated clears, this will be the time when the clear confirmation was received. For remotely initiated clears, this will be the time when the clear indication was received.
INT x25ClearedCircuitChannel	1.3.6.1.2.1.10.5.8.1.5	INTEGER	read-only	The channel number for the circuit that was cleared.
INT x25ClearedCircuitClearingCause	1.3.6.1.2.1.10.5.8.1.6	INTEGER	read-only	The Clearing Cause from the clear request or clear indication packet that cleared the circuit.
INT x25ClearedCircuitDiagnosticCode	1.3.6.1.2.1.10.5.8.1.7	INTEGER	read-only	The Diagnostic Code from the clear request or clear indication packet that cleared the circuit.
CTR x25ClearedCircuitInPdus	1.3.6.1.2.1.10.5.8.1.8	Counter	read-only	The number of PDUs received on the circuit.
CTR x25ClearedCircuitOutPdus	1.3.6.1.2.1.10.5.8.1.9	Counter	read-only	The number of PDUs transmitted on the circuit.
ADR x25ClearedCircuitCalledAddress	1.3.6.1.2.1.10.5.8.1.10	X121Address	read-only	The called address from the cleared circuit.
ADR x25ClearedCircuitCallingAddress	1.3.6.1.2.1.10.5.8.1.11	X121Address	read-only	The calling address from the cleared circuit.
OCT x25ClearedCircuitClearFacilities	1.3.6.1.2.1.10.5.8.1.12	OCTET STRING	read-only	The facilities field from the clear request or clear indication packet that cleared the circuit. A size of zero indicates no facilities were present.
x25CallParmTable	1.3.6.1.2.1.10.5.9		not-accessible	These objects contain the parameters that can be varied between X.25 calls. The entries in this table are independent of the PLE. There exists only one of these tables for the entire system. The indexes for the entries are independent of any PLE or any circuit. Other tables reference entries in this table. Entries in this table can be used for default PLE parameters, for parameters to use to place/answer a call, for the parameters currently in use for a circuit, or parameters that were used by a circuit. The number of references to a given set of parameters can be found in the x25CallParmRefCount object sharing the same instance identifier with the parameters. The value of this reference count also affects the access of the objects in this table. An object in this table with the same instance identifier as the instance identifier of an x25CallParmRefCount must be consider associated with that reference count. An object with an associated reference count of zero can be written (if its ACCESS clause allows it). An object with an associated reference count greater than zero can not be written (regardless of the ACCESS clause). This ensures that a set of call parameters being referenced from another table can not be modified or changed in a ways inappropriate for continued use by that table.
x25CallParmEntry	1.3.6.1.2.1.10.5.9.1		not-accessible	Entries of x25CallParmTable.
NUM x25CallParmIndex	1.3.6.1.2.1.10.5.9.1.1	PositiveInteger	read-only	A value that distinguishes this entry from another entry. Entries in this table are referenced from other objects which identify call parameters. It is impossible to know which other objects in the MIB reference entries in the table by looking at this table. Because of this, changes to parameters must be accomplished by creating a new entry in this table and then changing the referencing table to identify the new entry. Note that an agent will only use the values in this table when another table is changed to reference those values. The number of other tables that reference an index object in this table can be found in x25CallParmRefCount. The value of the reference count will affect the writability of the objects as explained above. Entries in this table which have a reference count of zero maybe deleted at the convence of the agent. Care should be taken by the agent to give the NMS sufficient time to create a reference to newly created entries. Should a Management Station not find a free index with which to create a new entry, it may feel free to delete entries with a reference count of zero. However in doing so the Management Station much realize it may impact other Management Stations.
ENT x25CallParmStatus	1.3.6.1.2.1.10.5.9.1.2	EntryStatus	read-write	The status of this call parameter entry. See RFC 1271 for details of usage.
NUM x25CallParmRefCount	1.3.6.1.2.1.10.5.9.1.3	PositiveInteger	read-only	The number of references know by a management station to exist to this set of call parameters. This is the number of other objects that have returned a value of, and will return a value of, the index for this set of call parameters. Examples of such objects are the x25AdmnDefCallParamId, x25OperDataLinkId, or x25AdmnDefCallParamId objects defined above.
INT x25CallParmInPacketSize	1.3.6.1.2.1.10.5.9.1.4	INTEGER	read-write	The maximum receive packet size in octets for a circuit. A size of zero for a circuit means use the PLE default size. A size of zero for the PLE means use a default size of 128.
INT x25CallParmOutPacketSize	1.3.6.1.2.1.10.5.9.1.5	INTEGER	read-write	The maximum transmit packet size in octets for a circuit. A size of zero for a circuit means use the PLE default size. A size of zero for the PLE default means use a default size of 128.
INT x25CallParmInWindowSize	1.3.6.1.2.1.10.5.9.1.6	INTEGER	read-write	The receive window size for a circuit. A size of zero for a circuit means use the PLE default size. A size of zero for the PLE default means use 2.
INT x25CallParmOutWindowSize	1.3.6.1.2.1.10.5.9.1.7	INTEGER	read-write	The transmit window size for a circuit. A size of zero for a circuit means use the PLE default size. A size of zero for the PLE default means use 2.
INT x25CallParmAcceptReverseCharging	1.3.6.1.2.1.10.5.9.1.8	INTEGER	read-write	An enumeration defining if the PLE will accept or refuse charges. A value of default for a circuit means use the PLE default value. A value of neverAccept is only used for the PLE default and indicates the PLE will never accept reverse charging. A value of default for a PLE default means refuse.
INT x25CallParmProposeReverseCharging	1.3.6.1.2.1.10.5.9.1.9	INTEGER	read-write	An enumeration defining if the PLE should propose reverse or local charging. The value of default for a circuit means use the PLE default. The value of default for the PLE default means use local.
INT x25CallParmFastSelect	1.3.6.1.2.1.10.5.9.1.10	INTEGER	read-write	Expresses preference for use of fast select facility. The value of default for a circuit is the PLE default. A value of default for the PLE means noFastSelect. A value of noFastSelect or noRestrictedFastResponse indicates a circuit may not use fast select or restricted fast response.
INT x25CallParmInThruPutClasSize	1.3.6.1.2.1.10.5.9.1.11	INTEGER	read-write	The incoming throughput class to negotiate. A value of tcDefault for a circuit means use the PLE default. A value of tcDefault for the PLE default means tcNone. A value of tcNone means do not negotiate throughtput class.
INT x25CallParmOutThruPutClasSize	1.3.6.1.2.1.10.5.9.1.12	INTEGER	read-write	The outgoing throughput class to negotiate. A value of tcDefault for a circuit means use the PLE default. A value of tcDefault for the PLE default means use tcNone. A value of tcNone means do not negotiate throughtput class.
STR x25CallParmCug	1.3.6.1.2.1.10.5.9.1.13	DisplayString	read-write	The Closed User Group to specify. This consists of two or four octets containing the characters 0 through 9. A zero length string indicates no facility requested. A string length of three containing the characters DEF for a circuit means use the PLE default, (the PLE default parameter may not reference an entry of DEF.)
STR x25CallParmCugoa	1.3.6.1.2.1.10.5.9.1.14	DisplayString	read-write	The Closed User Group with Outgoing Access to specify. This consists of two or four octets containing the characters 0 through 9. A string length of three containing the characters DEF for a circuit means use the PLE default (the PLE default parameters may not reference an entry of DEF). A zero length string indicates no facility requested.
STR x25CallParmBcug	1.3.6.1.2.1.10.5.9.1.15	DisplayString	read-write	The Bilateral Closed User Group to specify. This consists of two octets containing the characters 0 through 9. A string length of three containing the characters DEF for a circuit means use the PLE default (the PLE default parameter may not reference an entry of DEF). A zero length string indicates no facility requested.
OCT x25CallParmNui	1.3.6.1.2.1.10.5.9.1.16	OCTET STRING	read-write	The Network User Identifier facility. This is binary value to be included immediately after the length field. The PLE will supply the length octet. A zero length string indicates no facility requested. This value is ignored for the PLE default parameters entry.
INT x25CallParmChargingInfo	1.3.6.1.2.1.10.5.9.1.17	INTEGER	read-write	The charging Information facility. A value of default for a circuit means use the PLE default. The value of default for the default PLE parameters means use noFacility. The value of noFacility means do not include a facility.
STR x25CallParmRpoa	1.3.6.1.2.1.10.5.9.1.18	DisplayString	read-write	The RPOA facility. The octet string contains n * 4 sequences of the characters 0-9 to specify a facility with n entries. The octet string containing the 3 characters DEF for a circuit specifies use of the PLE default (the entry for the PLE default may not contain DEF). A zero length string indicates no facility requested.
INT x25CallParmTrnstDly	1.3.6.1.2.1.10.5.9.1.19	INTEGER	read-write	The Transit Delay Selection and Indication value. A value of 65536 indicates no facility requested. A value of 65537 for a circuit means use the PLE default (the PLE default parameters entry may not use the value 65537). The value 65535 may only be used to indicate the value in use by a circuit.
STR x25CallParmCallingExt	1.3.6.1.2.1.10.5.9.1.20	DisplayString	read-write	The Calling Extension facility. This contains one of the following: A sequence of hex digits with the value to be put in the facility. These digits will be converted to binary by the agent and put in the facility. These octets do not include the length octet. A value containing the three character DEF for a circuit means use the PLE default, (the entry for the PLE default parameters may not use the value DEF). A zero length string indicates no facility requested.
STR x25CallParmCalledExt	1.3.6.1.2.1.10.5.9.1.21	DisplayString	read-write	The Called Extension facility. This contains one of the following: A sequence of hex digits with the value to be put in the facility. These digits will be converted to binary by the agent and put in the facility. These octets do not include the length octet. A value containing the three character DEF for a circuit means use the PLE default, (the entry for the PLE default parameters may not use the value DEF). A zero length string indicates no facility requested.
INT x25CallParmInMinThuPutCls	1.3.6.1.2.1.10.5.9.1.22	INTEGER	read-write	The minimum input throughput Class. A value of 16 for a circuit means use the PLE default (the PLE parameters entry may not use this value). A value of 17 indicates no facility requested.
INT x25CallParmOutMinThuPutCls	1.3.6.1.2.1.10.5.9.1.23	INTEGER	read-write	The minimum output throughput Class. A value of 16 for a circuit means use the PLE default (the PLE parameters entry may not use this value). A value of 17 indicates no facility requested.
OCT x25CallParmEndTrnsDly	1.3.6.1.2.1.10.5.9.1.24	OCTET STRING	read-write	The End-to-End Transit Delay to negotiate. An octet string of length 2, 4, or 6 contains the facility encoded as specified in ISO/IEC 8208 section 15.3.2.4. An octet string of length 3 containing the three character DEF for a circuit means use the PLE default (the entry for the PLE default can not contain the characters DEF). A zero length string indicates no facility requested.
OCT x25CallParmPriority	1.3.6.1.2.1.10.5.9.1.25	OCTET STRING	read-write	The priority facility to negotiate. The octet string encoded as specified in ISO/IEC 8208 section 15.3.2.5. A zero length string indicates no facility requested. The entry for the PLE default parameters must be zero length.
STR x25CallParmProtection	1.3.6.1.2.1.10.5.9.1.26	DisplayString	read-write	A string contains the following: A hex string containing the value for the protection facility. This will be converted from hex to the octets actually in the packet by the agent. The agent will supply the length field and the length octet is not contained in this string. An string containing the 3 characters DEF for a circuit means use the PLE default (the entry for the PLE default parameters may not use the value DEF). A zero length string mean no facility requested.
INT x25CallParmExptData	1.3.6.1.2.1.10.5.9.1.27	INTEGER	read-write	The Expedited Data facility to negotiate. A value of default for a circuit means use the PLE default value. The entry for the PLE default parameters may not have the value default.
OCT x25CallParmUserData	1.3.6.1.2.1.10.5.9.1.28	OCTET STRING	read-write	The call user data as placed in the packet. A zero length string indicates no call user data. If both the circuit call parameters and the PLE default have call user data defined, the data from the circuit call parameters will be used. If only the PLE has data defined, the PLE entry will be used. If neither the circuit call parameters or the PLE default entry has a value, no call user data will be sent.
OCT x25CallParmCallingNetworkFacilities	1.3.6.1.2.1.10.5.9.1.29	OCTET STRING	read-write	The calling network facilities. The facilities are encoded here exactly as encoded in the call packet. These facilities do not include the marker facility code. A zero length string in the entry for the parameter to use when establishing a circuit means use the PLE default. A zero length string in the entry for PLE default parameters indicates no default facilities.
OCT x25CallParmCalledNetworkFacilities	1.3.6.1.2.1.10.5.9.1.30	OCTET STRING	read-write	The called network facilities. The facilities are encoded here exactly as encoded in the call packet. These facilities do not include the marker facility code. A zero length string in the entry for the parameter to use when establishing a circuit means use the PLE default. A zero length string in the entry for PLE default parameters indicates no default facilities.
x25ProtocolVersion	1.3.6.1.2.1.10.5.10
x25protocolCcittV1976	1.3.6.1.2.1.10.5.10.1
x25protocolCcittV1980	1.3.6.1.2.1.10.5.10.2
x25protocolCcittV1984	1.3.6.1.2.1.10.5.10.3
x25protocolCcittV1988	1.3.6.1.2.1.10.5.10.4
x25protocolIso8208V1987	1.3.6.1.2.1.10.5.10.5
x25protocolIso8208V1989	1.3.6.1.2.1.10.5.10.6
lapb	1.3.6.1.2.1.10.16
lapbProtocolVersion	1.3.6.1.2.1.10.16.5
lapbProtocolIso7776v1986	1.3.6.1.2.1.10.16.5.1
lapbProtocolCcittV1980	1.3.6.1.2.1.10.16.5.2
lapbProtocolCcittV1984	1.3.6.1.2.1.10.16.5.3
frame_relay	1.3.6.1.2.1.10.32
NTF frDLCIStatusChange	1.3.6.1.2.1.10.32.0.1			This trap indicates that the indicated Virtual Circuit has changed state. It has either been created or invalidated, or has toggled between the active and inactive states.
frDlcmiTable	1.3.6.1.2.1.10.32.1		not-accessible	The Parameters for the Data Link Connection Management Interface for the frame relay service on this interface.
frDlcmiEntry	1.3.6.1.2.1.10.32.1.1		not-accessible	The Parameters for a particular Data Link Con- nection Management Interface.
IND frDlcmiIfIndex	1.3.6.1.2.1.10.32.1.1.1	Index	read-only	The ifIndex value of the corresponding ifEn- try.
INT frDlcmiState	1.3.6.1.2.1.10.32.1.1.2	INTEGER	read-write	This variable states which Data Link Connec- tion Management scheme is active (and by impli- cation, what DLCI it uses) on the Frame Relay interface.
INT frDlcmiAddress	1.3.6.1.2.1.10.32.1.1.3	INTEGER	read-write	This variable states which address format is in use on the Frame Relay interface.
INT frDlcmiAddressLen	1.3.6.1.2.1.10.32.1.1.4	INTEGER	read-write	This variable states which address length in octets. In the case of Q922 format, the length indicates the entire length of the address in- cluding the control portion.
INT frDlcmiPollingInterval	1.3.6.1.2.1.10.32.1.1.5	INTEGER	read-write	This is the number of seconds between succes- sive status enquiry messages.
INT frDlcmiFullEnquiryInterval	1.3.6.1.2.1.10.32.1.1.6	INTEGER	read-write	Number of status enquiry intervals that pass before issuance of a full status enquiry mes- sage.
INT frDlcmiErrorThreshold	1.3.6.1.2.1.10.32.1.1.7	INTEGER	read-write	This is the maximum number of unanswered Status Enquiries the equipment shall accept be- fore declaring the interface down.
INT frDlcmiMonitoredEvents	1.3.6.1.2.1.10.32.1.1.8	INTEGER	read-write	This is the number of status polling intervals over which the error threshold is counted. For example, if within 'MonitoredEvents' number of events the station receives 'ErrorThreshold' number of errors, the interface is marked as down.
INT frDlcmiMaxSupportedVCs	1.3.6.1.2.1.10.32.1.1.9	INTEGER	read-write	The maximum number of Virtual Circuits allowed for this interface. Usually dictated by the Frame Relay network. In response to a SET, if a value less than zero or higher than the agent's maximal capability is configured, the agent should respond bad- Value
INT frDlcmiMulticast	1.3.6.1.2.1.10.32.1.1.10	INTEGER	read-write	This indicates whether the Frame Relay inter- face is using a multicast service.
frCircuitTable	1.3.6.1.2.1.10.32.2		not-accessible	A table containing information about specific Data Link Connection Identifiers and corresponding virtual circuits.
frCircuitEntry	1.3.6.1.2.1.10.32.2.1		not-accessible	The information regarding a single Data Link Connection Identifier.
IND frCircuitIfIndex	1.3.6.1.2.1.10.32.2.1.1	Index	read-only	The ifIndex Value of the ifEntry this virtual circuit is layered onto.
DLC frCircuitDlci	1.3.6.1.2.1.10.32.2.1.2	DLCI	read-only	The Data Link Connection Identifier for this virtual circuit.
INT frCircuitState	1.3.6.1.2.1.10.32.2.1.3	INTEGER	read-write	Indicates whether the particular virtual cir- cuit is operational. In the absence of a Data Link Connection Management Interface, virtual circuit entries (rows) may be created by set- ting virtual circuit state to 'active', or deleted by changing Circuit state to 'invalid'. Whether or not the row actually disappears is left to the implementation, so this object may actually read as 'invalid' for some arbitrary length of time. It is also legal to set the state of a virtual circuit to 'inactive' to temporarily disable a given circuit.
CTR frCircuitReceivedFECNs	1.3.6.1.2.1.10.32.2.1.4	Counter	read-only	Number of frames received from the network in- dicating forward congestion since the virtual circuit was created.
CTR frCircuitReceivedBECNs	1.3.6.1.2.1.10.32.2.1.5	Counter	read-only	Number of frames received from the network in- dicating backward congestion since the virtual circuit was created.
CTR frCircuitSentFrames	1.3.6.1.2.1.10.32.2.1.6	Counter	read-only	The number of frames sent from this virtual circuit since it was created.
CTR frCircuitSentOctets	1.3.6.1.2.1.10.32.2.1.7	Counter	read-only	The number of octets sent from this virtual circuit since it was created.
CTR frCircuitReceivedFrames	1.3.6.1.2.1.10.32.2.1.8	Counter	read-only	Number of frames received over this virtual circuit since it was created.
CTR frCircuitReceivedOctets	1.3.6.1.2.1.10.32.2.1.9	Counter	read-only	Number of octets received over this virtual circuit since it was created.
TIK frCircuitCreationTime	1.3.6.1.2.1.10.32.2.1.10	TimeTicks	read-only	The value of sysUpTime when the virtual cir- cuit was created, whether by the Data Link Con- nection Management Interface or by a SetRe- quest.
TIK frCircuitLastTimeChange	1.3.6.1.2.1.10.32.2.1.11	TimeTicks	read-only	The value of sysUpTime when last there was a change in the virtual circuit state
INT frCircuitCommittedBurst	1.3.6.1.2.1.10.32.2.1.12	INTEGER	read-write	This variable indicates the maximum amount of data, in bits, that the network agrees to transfer under normal conditions, during the measurement interval.
INT frCircuitExcessBurst	1.3.6.1.2.1.10.32.2.1.13	INTEGER	read-write	This variable indicates the maximum amount of uncommitted data bits that the network will at- tempt to deliver over the measurement interval. By default, if not configured when creating the entry, the Excess Information Burst Size is set to the value of ifSpeed.
INT frCircuitThroughput	1.3.6.1.2.1.10.32.2.1.14	INTEGER	read-write	Throughput is the average number of 'Frame Re- lay Information Field' bits transferred per second across a user network interface in one direction, measured over the measurement inter- val. If the configured committed burst rate and throughput are both non-zero, the measurement interval T=frCircuitCommittedBurst/frCircuitThroughput. If the configured committed burst rate and throughput are both zero, the measurement in- terval T=frCircuitExcessBurst/ifSpeed.
frErrTable	1.3.6.1.2.1.10.32.3		not-accessible	A table containing information about Errors on the Frame Relay interface.
frErrEntry	1.3.6.1.2.1.10.32.3.1		not-accessible	The error information for a single frame relay interface.
IND frErrIfIndex	1.3.6.1.2.1.10.32.3.1.1	Index	read-only	The ifIndex Value of the corresponding ifEn- try.
INT frErrType	1.3.6.1.2.1.10.32.3.1.2	INTEGER	read-only	The type of error that was last seen on this interface.
OCT frErrData	1.3.6.1.2.1.10.32.3.1.3	OCTET STRING	read-only	An octet string containing as much of the er- ror packet as possible. As a minimum, it must contain the Q.922 Address or as much as was delivered. It is desirable to include all in- formation up to the PDU.
TIK frErrTime	1.3.6.1.2.1.10.32.3.1.4	TimeTicks	read-only	The value of sysUpTime at which the error was detected.
frame_relay_globals	1.3.6.1.2.1.10.32.4
INT frTrapState	1.3.6.1.2.1.10.32.4.1	INTEGER	read-write	This variable indicates whether the system produces the frDLCIStatusChange trap.
snmp	1.3.6.1.2.1.11
CTR snmpInPkts	1.3.6.1.2.1.11.1	Counter	read-only	The total number of Messages delivered to the SNMP entity from the transport service.
CTR snmpOutPkts	1.3.6.1.2.1.11.2	Counter	read-only	The total number of SNMP Messages which were passed from the SNMP protocol entity to the transport service.
CTR snmpInBadVersions	1.3.6.1.2.1.11.3	Counter	read-only	The total number of SNMP Messages which were delivered to the SNMP protocol entity and were for an unsupported SNMP version.
CTR snmpInBadCommunityNames	1.3.6.1.2.1.11.4	Counter	read-only	The total number of SNMP Messages delivered to the SNMP protocol entity which used a SNMP community name not known to said entity.
CTR snmpInBadCommunityUses	1.3.6.1.2.1.11.5	Counter	read-only	The total number of SNMP Messages delivered to the SNMP protocol entity which represented an SNMP operation which was not allowed by the SNMP community named in the Message.
CTR snmpInASNParseErrs	1.3.6.1.2.1.11.6	Counter	read-only	The total number of ASN.1 or BER errors encountered by the SNMP protocol entity when decoding received SNMP Messages.
CTR snmpInTooBigs	1.3.6.1.2.1.11.8	Counter	read-only	The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `tooBig'.
CTR snmpInNoSuchNames	1.3.6.1.2.1.11.9	Counter	read-only	The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `noSuchName'.
CTR snmpInBadValues	1.3.6.1.2.1.11.10	Counter	read-only	The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `badValue'.
CTR snmpInReadOnlys	1.3.6.1.2.1.11.11	Counter	read-only	The total number valid SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `readOnly'. It should be noted that it is a protocol error to generate an SNMP PDU which contains the value `readOnly' in the error-status field, as such this object is provided as a means of detecting incorrect implementations of the SNMP.
CTR snmpInGenErrs	1.3.6.1.2.1.11.12	Counter	read-only	The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `genErr'.
CTR snmpInTotalReqVars	1.3.6.1.2.1.11.13	Counter	read-only	The total number of MIB objects which have been retrieved successfully by the SNMP protocol entity as the result of receiving valid SNMP Get-Request and Get-Next PDUs.
CTR snmpInTotalSetVars	1.3.6.1.2.1.11.14	Counter	read-only	The total number of MIB objects which have been altered successfully by the SNMP protocol entity as the result of receiving valid SNMP Set-Request PDUs.
CTR snmpInGetRequests	1.3.6.1.2.1.11.15	Counter	read-only	The total number of SNMP Get-Request PDUs which have been accepted and processed by the SNMP protocol entity.
CTR snmpInGetNexts	1.3.6.1.2.1.11.16	Counter	read-only	The total number of SNMP Get-Next PDUs which have been accepted and processed by the SNMP protocol entity.
CTR snmpInSetRequests	1.3.6.1.2.1.11.17	Counter	read-only	The total number of SNMP Set-Request PDUs which have been accepted and processed by the SNMP protocol entity.
CTR snmpInGetResponses	1.3.6.1.2.1.11.18	Counter	read-only	The total number of SNMP Get-Response PDUs which have been accepted and processed by the SNMP protocol entity.
CTR snmpInTraps	1.3.6.1.2.1.11.19	Counter	read-only	The total number of SNMP Trap PDUs which have been accepted and processed by the SNMP protocol entity.
CTR snmpOutTooBigs	1.3.6.1.2.1.11.20	Counter	read-only	The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `tooBig.'
CTR snmpOutNoSuchNames	1.3.6.1.2.1.11.21	Counter	read-only	The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status is `noSuchName'.
CTR snmpOutBadValues	1.3.6.1.2.1.11.22	Counter	read-only	The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `badValue'.
CTR snmpOutGenErrs	1.3.6.1.2.1.11.24	Counter	read-only	The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `genErr'.
CTR snmpOutGetRequests	1.3.6.1.2.1.11.25	Counter	read-only	The total number of SNMP Get-Request PDUs which have been generated by the SNMP protocol entity.
CTR snmpOutGetNexts	1.3.6.1.2.1.11.26	Counter	read-only	The total number of SNMP Get-Next PDUs which have been generated by the SNMP protocol entity.
CTR snmpOutSetRequests	1.3.6.1.2.1.11.27	Counter	read-only	The total number of SNMP Set-Request PDUs which have been generated by the SNMP protocol entity.
CTR snmpOutGetResponses	1.3.6.1.2.1.11.28	Counter	read-only	The total number of SNMP Get-Response PDUs which have been generated by the SNMP protocol entity.
CTR snmpOutTraps	1.3.6.1.2.1.11.29	Counter	read-only	The total number of SNMP Trap PDUs which have been generated by the SNMP protocol entity.
INT snmpEnableAuthenTraps	1.3.6.1.2.1.11.30	INTEGER	read-write	Indicates whether the SNMP agent process is permitted to generate authentication-failure traps. The value of this object overrides any configuration information; as such, it provides a means whereby all authentication-failure traps may be disabled. Note that it is strongly recommended that this object be stored in non-volatile memory so that it remains constant between re-initializations of the network management system.
appletalk	1.3.6.1.2.1.13
llap	1.3.6.1.2.1.13.1
aarp	1.3.6.1.2.1.13.2
atport	1.3.6.1.2.1.13.3
ddp	1.3.6.1.2.1.13.4
rtmp	1.3.6.1.2.1.13.5
kip	1.3.6.1.2.1.13.6
zip	1.3.6.1.2.1.13.7
nbp	1.3.6.1.2.1.13.8
atecho	1.3.6.1.2.1.13.9
ospf	1.3.6.1.2.1.14
ospfGeneralGroup	1.3.6.1.2.1.14.1
rmon	1.3.6.1.2.1.16
NTF risingAlarm	1.3.6.1.2.1.16.0.1			The SNMP trap that is generated when an alarm entry crosses its rising threshold and generates an event that is configured for sending SNMP traps.
NTF fallingAlarm	1.3.6.1.2.1.16.0.2			The SNMP trap that is generated when an alarm entry crosses its falling threshold and generates an event that is configured for sending SNMP traps.
statistics	1.3.6.1.2.1.16.1
etherStatsTable	1.3.6.1.2.1.16.1.1		not-accessible	A list of Ethernet statistics entries.
etherStatsEntry	1.3.6.1.2.1.16.1.1.1		not-accessible	A collection of statistics kept for a particular Ethernet interface.
INT etherStatsIndex	1.3.6.1.2.1.16.1.1.1.1	INTEGER	read-only	The value of this object uniquely identifies this etherStats entry.
OID etherStatsDataSource	1.3.6.1.2.1.16.1.1.1.2	OBJECT IDENTIFIER	read-write	This object identifies the source of the data that this etherStats entry is configured to analyze. This source can be any ethernet interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in [4,6], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all packets on the local network segment attached to the identified interface. This object may not be modified if the associated etherStatsStatus object is equal to valid(1).
CTR etherStatsDropEvents	1.3.6.1.2.1.16.1.1.1.3	Counter	read-only	The total number of events in which packets were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of packets dropped; it is just the number of times this condition has been detected.
CTR etherStatsOctets	1.3.6.1.2.1.16.1.1.1.4	Counter	read-only	The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).
CTR etherStatsPkts	1.3.6.1.2.1.16.1.1.1.5	Counter	read-only	The total number of packets (including error packets) received.
CTR etherStatsBroadcastPkts	1.3.6.1.2.1.16.1.1.1.6	Counter	read-only	The total number of good packets received that were directed to the broadcast address.
CTR etherStatsMulticastPkts	1.3.6.1.2.1.16.1.1.1.7	Counter	read-only	The total number of good packets received that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address.
CTR etherStatsCRCAlignErrors	1.3.6.1.2.1.16.1.1.1.8	Counter	read-only	The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but were not an integral number of octets in length or had a bad Frame Check Sequence (FCS).
CTR etherStatsUndersizePkts	1.3.6.1.2.1.16.1.1.1.9	Counter	read-only	The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
CTR etherStatsOversizePkts	1.3.6.1.2.1.16.1.1.1.10	Counter	read-only	The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
CTR etherStatsFragments	1.3.6.1.2.1.16.1.1.1.11	Counter	read-only	The total number of packets received that were not an integral number of octets in length or that had a bad Frame Check Sequence (FCS), and were less than 64 octets in length (excluding framing bits but including FCS octets).
CTR etherStatsJabbers	1.3.6.1.2.1.16.1.1.1.12	Counter	read-only	The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and were not an integral number of octets in length or had a bad Frame Check Sequence (FCS).
CTR etherStatsCollisions	1.3.6.1.2.1.16.1.1.1.13	Counter	read-only	The best estimate of the total number of collisions on this Ethernet segment.
CTR etherStatsPkts64Octets	1.3.6.1.2.1.16.1.1.1.14	Counter	read-only	The total number of packets (including error packets) received that were 64 octets in length (excluding framing bits but including FCS octets).
CTR etherStatsPkts65to127Octets	1.3.6.1.2.1.16.1.1.1.15	Counter	read-only	The total number of packets (including error packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
CTR etherStatsPkts128to255Octets	1.3.6.1.2.1.16.1.1.1.16	Counter	read-only	The total number of packets (including error packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
CTR etherStatsPkts256to511Octets	1.3.6.1.2.1.16.1.1.1.17	Counter	read-only	The total number of packets (including error packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
CTR etherStatsPkts512to1023Octets	1.3.6.1.2.1.16.1.1.1.18	Counter	read-only	The total number of packets (including error packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
CTR etherStatsPkts1024to1518Octets	1.3.6.1.2.1.16.1.1.1.19	Counter	read-only	The total number of packets (including error packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
STR etherStatsOwner	1.3.6.1.2.1.16.1.1.1.20	OwnerString	read-write	The entity that configured this entry and is therefore using the resources assigned to it.
ENT etherStatsStatus	1.3.6.1.2.1.16.1.1.1.21	EntryStatus	read-write	The status of this etherStats entry.
history	1.3.6.1.2.1.16.2
alarm	1.3.6.1.2.1.16.3
alarmTable	1.3.6.1.2.1.16.3.1		not-accessible	A list of alarm entries.
alarmEntry	1.3.6.1.2.1.16.3.1.1		not-accessible	A list of parameters that set up a periodic checking for alarm conditions.
INT alarmIndex	1.3.6.1.2.1.16.3.1.1.1	INTEGER	read-only	An index that uniquely identifies an entry in the alarm table. Each such entry defines a diagnostic sample at a particular interval for an object on the device.
INT alarmInterval	1.3.6.1.2.1.16.3.1.1.2	INTEGER	read-write	The interval in seconds over which the data is sampled and compared with the rising and falling thresholds. When setting this variable, care should be given to ensure that the variable being monitored will not exceed 2^31 - 1 and roll over the alarmValue object during the interval. This object may not be modified if the associated alarmStatus object is equal to valid(1).
OID alarmVariable	1.3.6.1.2.1.16.3.1.1.3	OBJECT IDENTIFIER	read-write	The object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1 primitive type of INTEGER (INTEGER, Counter, Gauge, or TimeTicks) may be sampled. Because SNMP access control is articulated entirely in terms of the contents of MIB views, no access control mechanism exists that can restrict the value of this object to identify only those objects that exist in a particular MIB view. Because there is thus no acceptable means of restricting the read access that could be obtained through the alarm mechanism, the probe must only grant write access to this object in those views that have read access to all objects on the probe. During a set operation, if the supplied variable name is not available in the selected MIB view, a badValue error must be returned. If at any time the variable name of an established alarmEntry is no longer available in the selected MIB view, the probe must change the status of this alarmEntry to invalid(4). This object may not be modified if the associated alarmStatus object is equal to valid(1).
INT alarmSampleType	1.3.6.1.2.1.16.3.1.1.4	INTEGER	read-write	The method of sampling the selected variable and calculating the value to be compared against the thresholds. If the value of this object is absoluteValue(1), the value of the selected variable will be compared directly with the thresholds at the end of the sampling interval. If the value of this object is deltaValue(2), the value of the selected variable at the last sample will be subtracted from the current value, and the difference compared with the thresholds. This object may not be modified if the associated alarmStatus object is equal to valid(1).
INT alarmValue	1.3.6.1.2.1.16.3.1.1.5	INTEGER	read-only	The value of the statistic during the last sampling period. The value during the current sampling period is not made available until the period is completed.
INT alarmStartupAlarm	1.3.6.1.2.1.16.3.1.1.6	INTEGER	read-write	The alarm that may be sent when this entry is first set to valid. If the first sample after this entry becomes valid is greater than or equal to the risingThreshold and alarmStartupAlarm is equal to risingAlarm(1) or risingOrFallingAlarm(3), then a single rising alarm will be generated. If the first sample after this entry becomes valid is less than or equal to the fallingThreshold and alarmStartupAlarm is equal to fallingAlarm(2) or risingOrFallingAlarm(3), then a single falling alarm will be generated. This object may not be modified if the associated alarmStatus object is equal to valid(1).
INT alarmRisingThreshold	1.3.6.1.2.1.16.3.1.1.7	INTEGER	read-write	A threshold for the sampled statistic. When the current sampled value is greater than or equal to this threshold, and the value at the last sampling interval was less than this threshold, a single event will be generated. A single event will also be generated if the first sample after this entry becomes valid is greater than or equal to this threshold and the associated alarmStartupAlarm is equal to risingAlarm(1) or risingOrFallingAlarm(3). After a rising event is generated, another such event will not be generated until the sampled value falls below this threshold and reaches the alarmFallingThreshold. This object may not be modified if the associated alarmStatus object is equal to valid(1).
INT alarmFallingThreshold	1.3.6.1.2.1.16.3.1.1.8	INTEGER	read-write	A threshold for the sampled statistic. When the current sampled value is less than or equal to this threshold, and the value at the last sampling interval was greater than this threshold, a single event will be generated. A single event will also be generated if the first sample after this entry becomes valid is less than or equal to this threshold and the associated alarmStartupAlarm is equal to fallingAlarm(2) or risingOrFallingAlarm(3). After a falling event is generated, another such event will not be generated until the sampled value rises above this threshold and reaches the alarmRisingThreshold. This object may not be modified if the associated alarmStatus object is equal to valid(1).
INT alarmRisingEventIndex	1.3.6.1.2.1.16.3.1.1.9	INTEGER	read-write	The index of the eventEntry that is used when a rising threshold is crossed. The eventEntry identified by a particular value of this index is the same as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In particular, if this value is zero, no associated event will be generated, as zero is not a valid event index. This object may not be modified if the associated alarmStatus object is equal to valid(1).
INT alarmFallingEventIndex	1.3.6.1.2.1.16.3.1.1.10	INTEGER	read-write	The index of the eventEntry that is used when a falling threshold is crossed. The eventEntry identified by a particular value of this index is the same as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In particular, if this value is zero, no associated event will be generated, as zero is not a valid event index. This object may not be modified if the associated alarmStatus object is equal to valid(1).
STR alarmOwner	1.3.6.1.2.1.16.3.1.1.11	OwnerString	read-write	The entity that configured this entry and is therefore using the resources assigned to it.
ENT alarmStatus	1.3.6.1.2.1.16.3.1.1.12	EntryStatus	read-write	The status of this alarm entry.
hosts	1.3.6.1.2.1.16.4
hostTopN	1.3.6.1.2.1.16.5
matrix	1.3.6.1.2.1.16.6
filter	1.3.6.1.2.1.16.7
capture	1.3.6.1.2.1.16.8
event	1.3.6.1.2.1.16.9
eventTable	1.3.6.1.2.1.16.9.1		not-accessible	A list of events to be generated.
eventEntry	1.3.6.1.2.1.16.9.1.1		not-accessible	A set of parameters that describe an event to be generated when certain conditions are met.
INT eventIndex	1.3.6.1.2.1.16.9.1.1.1	INTEGER	read-only	An index that uniquely identifies an entry in the event table. Each such entry defines one event that is to be generated when the appropriate conditions occur.
STR eventDescription	1.3.6.1.2.1.16.9.1.1.2	DisplayString	read-write	A comment describing this event entry.
INT eventType	1.3.6.1.2.1.16.9.1.1.3	INTEGER	read-write	The type of notification that the probe will make about this event. In the case of log, an entry is made in the log table for each event. In the case of snmp-trap, an SNMP trap is sent to one or more management stations.
OCT eventCommunity	1.3.6.1.2.1.16.9.1.1.4	OCTET STRING	read-write	If an SNMP trap is to be sent, it will be sent to the SNMP community specified by this octet string. In the future this table will be extended to include the party security mechanism. This object shall be set to a string of length zero if it is intended that that mechanism be used to specify the destination of the trap.
TIK eventLastTimeSent	1.3.6.1.2.1.16.9.1.1.5	TimeTicks	read-only	The value of sysUpTime at the time this event entry last generated an event. If this entry has not generated any events, this value will be zero.
STR eventOwner	1.3.6.1.2.1.16.9.1.1.6	OwnerString	read-write	The entity that configured this entry and is therefore using the resources assigned to it. If this object contains a string starting with 'monitor' and has associated entries in the log table, all connected management stations should retrieve those log entries, as they may have significance to all management stations connected to this device
ENT eventStatus	1.3.6.1.2.1.16.9.1.1.7	EntryStatus	read-write	The status of this event entry. If this object is not equal to valid(1), all associated log entries shall be deleted by the agent.
logTable	1.3.6.1.2.1.16.9.2		not-accessible	A list of events that have been logged.
logEntry	1.3.6.1.2.1.16.9.2.1		not-accessible	A set of data describing an event that has been logged.
INT logEventIndex	1.3.6.1.2.1.16.9.2.1.1	INTEGER	read-only	The event entry that generated this log entry. The log identified by a particular value of this index is associated with the same eventEntry as identified by the same value of eventIndex.
INT logIndex	1.3.6.1.2.1.16.9.2.1.2	INTEGER	read-only	An index that uniquely identifies an entry in the log table amongst those generated by the same eventEntries. These indexes are assigned beginning with 1 and increase by one with each new log entry. The association between values of logIndex and logEntries is fixed for the lifetime of each logEntry. The agent may choose to delete the oldest instances of logEntry as required because of lack of memory. It is an implementation-specific matter as to when this deletion may occur.
TIK logTime	1.3.6.1.2.1.16.9.2.1.3	TimeTicks	read-only	The value of sysUpTime when this log entry was created.
STR logDescription	1.3.6.1.2.1.16.9.2.1.4	DisplayString	read-only	An implementation dependent description of the event that activated this log entry.
dot1dBridge	1.3.6.1.2.1.17
NTF newRoot	1.3.6.1.2.1.17.0.1			The newRoot trap indicates that the sending agent has become the new root of the Spanning Tree; the trap is sent by a bridge soon after its election as the new root, e.g., upon expiration of the Topology Change Timer immediately subsequent to its election. Implementation of this trap is optional.
NTF topologyChange	1.3.6.1.2.1.17.0.2			A topologyChange trap is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. The trap is not sent if a newRoot trap is sent for the same transition. Implementation of this trap is optional.
dot1dBase	1.3.6.1.2.1.17.1
MAC dot1dBaseBridgeAddress	1.3.6.1.2.1.17.1.1	MacAddress	read-only	The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However it is only required to be unique. When concatenated with dot1dStpPriority a unique BridgeIdentifier is formed which is used in the Spanning Tree Protocol.
INT dot1dBaseNumPorts	1.3.6.1.2.1.17.1.2	INTEGER	read-only	The number of ports controlled by this bridging entity.
INT dot1dBaseType	1.3.6.1.2.1.17.1.3	INTEGER	read-only	Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging this will be indicated by entries in the port table for the given type.
dot1dBasePortTable	1.3.6.1.2.1.17.1.4		not-accessible	A table that contains generic information about every port that is associated with this bridge. Transparent, source-route, and srt ports are included.
dot1dBasePortEntry	1.3.6.1.2.1.17.1.4.1		not-accessible	A list of information for each port of the bridge.
INT dot1dBasePort	1.3.6.1.2.1.17.1.4.1.1	INTEGER	read-only	The port number of the port for which this entry contains bridge management information.

1.3.6.1.2.1

1.3.6.1.2.1.1

1.3.6.1.2.1.1.1

DisplayString

read-only

A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software. It is mandatory that this only contain printable ASCII characters.

OID sysObjectID

1.3.6.1.2.1.1.2

OBJECT IDENTIFIER

read-only

The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining `what kind of box' is being managed. For example, if vendor `Flintstones, Inc.' was assigned the subtree 1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'.

TIK sysUpTime

1.3.6.1.2.1.1.3

TimeTicks

read-only

The time (in hundredths of a second) since the network management portion of the system was last re-initialized.

STR sysContact

1.3.6.1.2.1.1.4

DisplayString

read-write

The textual identification of the contact person for this managed node, together with information on how to contact this person.

STR sysName

1.3.6.1.2.1.1.5

DisplayString

read-write

An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name.

STR sysLocation

1.3.6.1.2.1.1.6

DisplayString

read-write

The physical location of this node (e.g., `telephone closet, 3rd floor').

INT sysServices

1.3.6.1.2.1.1.7

INTEGER

read-only

A value which indicates the set of services that this entity primarily offers. The value is a sum. This sum initially takes the value zero, Then, for each layer, L, in the range 1 through 7, that this node performs transactions for, 2 raised to (L - 1) is added to the sum. For example, a node which performs primarily routing functions would have a value of 4 (2^(3-1)). In contrast, a node which is a host offering application services would have a value of 72 (2^(4-1) + 2^(7-1)). Note that in the context of the Internet suite of protocols, values should be calculated accordingly: layer functionality 1 physical (e.g., repeaters) 2 datalink/subnetwork (e.g., bridges) 3 internet (e.g., IP gateways) 4 end-to-end (e.g., IP hosts) 7 applications (e.g., mail relays) For systems including OSI protocols, layers 5 and 6 may also be counted.

interfaces

1.3.6.1.2.1.2

INT ifNumber

1.3.6.1.2.1.2.1

INTEGER

read-only

The number of network interfaces (regardless of their current state) present on this system.

ifTable

1.3.6.1.2.1.2.2

not-accessible

A list of interface entries. The number of entries is given by the value of ifNumber.

ifEntry

1.3.6.1.2.1.2.2.1

not-accessible

An interface entry containing objects at the subnetwork layer and below for a particular interface.

INT ifIndex

1.3.6.1.2.1.2.2.1.1

INTEGER

read-only

A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.

STR ifDescr

1.3.6.1.2.1.2.2.1.2

DisplayString

read-only

A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the hardware interface.

INT ifType

1.3.6.1.2.1.2.2.1.3

INTEGER

read-only

The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack.

INT ifMtu

1.3.6.1.2.1.2.2.1.4

INTEGER

read-only

The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface.

GAU ifSpeed

1.3.6.1.2.1.2.2.1.5

Gauge

read-only

An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth.

PHY ifPhysAddress

1.3.6.1.2.1.2.2.1.6

PhysAddress

read-only

The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.

INT ifAdminStatus

1.3.6.1.2.1.2.2.1.7

INTEGER

read-write

The desired state of the interface. The testing(3) state indicates that no operational packets can be passed.

INT ifOperStatus

1.3.6.1.2.1.2.2.1.8

INTEGER

read-only

The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed.

TIK ifLastChange

1.3.6.1.2.1.2.2.1.9

TimeTicks

read-only

The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.

CTR ifInOctetsEx

1.3.6.1.2.1.2.2.1.10

Counter

read-only

The total number of octets received on the interface, including framing characters.

CTR ifInUcastPkts

1.3.6.1.2.1.2.2.1.11

Counter

read-only

The number of subnetwork-unicast packets delivered to a higher-layer protocol.

CTR ifInNUcastPkts

1.3.6.1.2.1.2.2.1.12

Counter

read-only

The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.

CTR ifInDiscards

1.3.6.1.2.1.2.2.1.13

Counter

read-only

The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.

CTR ifInErrors

1.3.6.1.2.1.2.2.1.14

Counter

read-only

The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.

CTR ifInUnknownProtos

1.3.6.1.2.1.2.2.1.15

Counter

read-only

The number of packets received via the interface which were discarded because of an unknown or unsupported protocol.

CTR ifOutOctets

1.3.6.1.2.1.2.2.1.16

Counter

read-only

The total number of octets transmitted out of the interface, including framing characters.

CTR ifOutUcastPkts

1.3.6.1.2.1.2.2.1.17

Counter

read-only

The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.

CTR ifOutNUcastPkts

1.3.6.1.2.1.2.2.1.18

Counter

read-only

The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent.

CTR ifOutDiscards

1.3.6.1.2.1.2.2.1.19

Counter

read-only

The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.

CTR ifOutErrors

1.3.6.1.2.1.2.2.1.20

Counter

read-only

The number of outbound packets that could not be transmitted because of errors.

GAU ifOutQLen

1.3.6.1.2.1.2.2.1.21

Gauge

read-only

The length of the output packet queue (in packets).

OID ifSpecific

1.3.6.1.2.1.2.2.1.22

OBJECT IDENTIFIER

read-only

A reference to MIB definitions specific to the particular media being used to realize the interface. For example, if the interface is realized by an ethernet, then the value of this object refers to a document defining objects specific to ethernet. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value.

at

1.3.6.1.2.1.3

atTable

1.3.6.1.2.1.3.1

not-accessible

The Address Translation tables contain the NetworkAddress to `physical' address equivalences. Some interfaces do not use translation tables for determining address equivalences (e.g., DDN-X.25 has an algorithmic method); if all interfaces are of this type, then the Address Translation table is empty, i.e., has zero entries.

atEntry

1.3.6.1.2.1.3.1.1

not-accessible

Each entry contains one NetworkAddress to `physical' address equivalence.

INT atIfIndex

1.3.6.1.2.1.3.1.1.1

INTEGER

read-write

The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.

PHY atPhysAddress

1.3.6.1.2.1.3.1.1.2

PhysAddress

read-write

The media-dependent `physical' address. Setting this object to a null string (one of zero length) has the effect of invaliding the corresponding entry in the atTable object. That is, it effectively dissasociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant atPhysAddress object.

IP atNetAddress

1.3.6.1.2.1.3.1.1.3

IpAddress

read-write

The NetworkAddress (e.g., the IP address) corresponding to the media-dependent `physical' address.

ip

1.3.6.1.2.1.4

INT ipForwarding

1.3.6.1.2.1.4.1

INTEGER

read-write

The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP gateways forward datagrams. IP hosts do not (except those source-routed via the host). Note that for some managed nodes, this object may take on only a subset of the values possible. Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to change this object to an inappropriate value.

INT ipDefaultTTL

1.3.6.1.2.1.4.2

INTEGER

read-write

The default value inserted into the Time-To-Live field of the IP header of datagrams originated at this entity, whenever a TTL value is not supplied by the transport layer protocol.

CTR ipInReceives

1.3.6.1.2.1.4.3

Counter

read-only

The total number of input datagrams received from interfaces, including those received in error.

CTR ipInHdrErrors

1.3.6.1.2.1.4.4

Counter

read-only

The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, etc.

CTR ipInAddrErrors

1.3.6.1.2.1.4.5

Counter

read-only

The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., 0.0.0.0) and addresses of unsupported Classes (e.g., Class E). For entities which are not IP Gateways and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address.

CTR ipForwDatagrams

1.3.6.1.2.1.4.6

Counter

read-only

The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward them to that final destination. In entities which do not act as IP Gateways, this counter will include only those packets which were Source-Routed via this entity, and the Source- Route option processing was successful.

CTR ipInUnknownProtos

1.3.6.1.2.1.4.7

Counter

read-only

The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol.

CTR ipInDiscards

1.3.6.1.2.1.4.8

Counter

read-only

The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly.

CTR ipInDelivers

1.3.6.1.2.1.4.9

Counter

read-only

The total number of input datagrams successfully delivered to IP user-protocols (including ICMP).

CTR ipOutRequests

1.3.6.1.2.1.4.10

Counter

read-only

The total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipForwDatagrams.

CTR ipOutDiscards

1.3.6.1.2.1.4.11

Counter

read-only

The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in ipForwDatagrams if any such packets met this (discretionary) discard criterion.

CTR ipOutNoRoutes

1.3.6.1.2.1.4.12

Counter

read-only

The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted in ipForwDatagrams which meet this `no-route' criterion. Note that this includes any datagarms which a host cannot route because all of its default gateways are down.

INT ipReasmTimeout

1.3.6.1.2.1.4.13

INTEGER

read-only

The maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity.

CTR ipReasmReqds

1.3.6.1.2.1.4.14

Counter

read-only

The number of IP fragments received which needed to be reassembled at this entity.

CTR ipReasmOKs

1.3.6.1.2.1.4.15

Counter

read-only

The number of IP datagrams successfully re- assembled.

CTR ipReasmFails

1.3.6.1.2.1.4.16

Counter

read-only

The number of failures detected by the IP re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received.

CTR ipFragOKs

1.3.6.1.2.1.4.17

Counter

read-only

The number of IP datagrams that have been successfully fragmented at this entity.

CTR ipFragFails

1.3.6.1.2.1.4.18

Counter

read-only

The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment flag was set.

CTR ipFragCreates

1.3.6.1.2.1.4.19

Counter

read-only

The number of IP datagram fragments that have been generated as a result of fragmentation at this entity.

ipAddrTable

1.3.6.1.2.1.4.20

not-accessible

The table of addressing information relevant to this entity's IP addresses.

ipAddrEntry

1.3.6.1.2.1.4.20.1

not-accessible

The addressing information for one of this entity's IP addresses.

IP ipAdEntAddr

1.3.6.1.2.1.4.20.1.1

IpAddress

read-only

The IP address to which this entry's addressing information pertains.

INT ipAdEntIfIndex

1.3.6.1.2.1.4.20.1.2

INTEGER

read-only

The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.

IP ipAdEntNetMask

1.3.6.1.2.1.4.20.1.3

IpAddress

read-only

The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.

INT ipAdEntBcastAddr

1.3.6.1.2.1.4.20.1.4

INTEGER

read-only

The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface.

INT ipAdEntReasmMaxSize

1.3.6.1.2.1.4.20.1.5

INTEGER

read-only

The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface.

ipRouteTable

1.3.6.1.2.1.4.21

not-accessible

This entity's IP Routing table.

ipRouteEntry

1.3.6.1.2.1.4.21.1

not-accessible

A route to a particular destination.

IP ipRouteDest

1.3.6.1.2.1.4.21.1.1

IpAddress

read-write

The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use.

INT ipRouteIfIndex

1.3.6.1.2.1.4.21.1.2

INTEGER

read-write

The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.

INT ipRouteMetric1

1.3.6.1.2.1.4.21.1.3

INTEGER

read-write

The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.

INT ipRouteMetric2

1.3.6.1.2.1.4.21.1.4

INTEGER

read-write

An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.

INT ipRouteMetric3

1.3.6.1.2.1.4.21.1.5

INTEGER

read-write

An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.

INT ipRouteMetric4

1.3.6.1.2.1.4.21.1.6

INTEGER

read-write

An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.

IP ipRouteNextHop

1.3.6.1.2.1.4.21.1.7

IpAddress

read-write

The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.)

INT ipRouteType

1.3.6.1.2.1.4.21.1.8

INTEGER

read-write

The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipRouteTable object. That is, it effectively dissasociates the destination identified with said entry from the route identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipRouteType object.

INT ipRouteProto

1.3.6.1.2.1.4.21.1.9

INTEGER

read-only

The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.

INT ipRouteAge

1.3.6.1.2.1.4.21.1.10

INTEGER

read-write

The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned.

IP ipRouteMask

1.3.6.1.2.1.4.21.1.11

IpAddress

read-write

Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipRouteMask by determining whether the value of the correspondent ipRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.0 class-C If the value of the ipRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism.

INT ipRouteMetric5

1.3.6.1.2.1.4.21.1.12

INTEGER

read-write

An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.

OID ipRouteInfo

1.3.6.1.2.1.4.21.1.13

OBJECT IDENTIFIER

read-only

A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the route's ipRouteProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value.

ipNetToMediaTable

1.3.6.1.2.1.4.22

not-accessible

The IP Address Translation table used for mapping from IP addresses to physical addresses.

ipNetToMediaEntry

1.3.6.1.2.1.4.22.1

not-accessible

Each entry contains one IpAddress to `physical' address equivalence.

INT ipNetToMediaIfIndex

1.3.6.1.2.1.4.22.1.1

INTEGER

read-write

The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.

PHY ipNetToMediaPhysAddress

1.3.6.1.2.1.4.22.1.2

PhysAddress

read-write

The media-dependent `physical' address.

IP ipNetToMediaNetAddress

1.3.6.1.2.1.4.22.1.3

IpAddress

read-only

The IpAddress corresponding to the media- dependent `physical' address.

INT ipNetToMediaType

1.3.6.1.2.1.4.22.1.4

INTEGER

read-write

The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipNetToMediaTable. That is, it effectively dissasociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipNetToMediaType object.

CTR ipRoutingDiscards

1.3.6.1.2.1.4.23

Counter

read-only

The number of routing entries which were chosen to be discarded even though they are valid. One possible reason for discarding such an entry could be to free-up buffer space for other routing entries.

icmp

1.3.6.1.2.1.5

CTR icmpInMsgs

1.3.6.1.2.1.5.1

Counter

read-only

The total number of ICMP messages which the entity received. Note that this counter includes all those counted by icmpInErrors.

CTR icmpInErrors

1.3.6.1.2.1.5.2

Counter

read-only

The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.).

CTR icmpInDestUnreachs

1.3.6.1.2.1.5.3

Counter

read-only

The number of ICMP Destination Unreachable messages received.

CTR icmpInTimeExcds

1.3.6.1.2.1.5.4

Counter

read-only

The number of ICMP Time Exceeded messages received.

CTR icmpInParmProbs

1.3.6.1.2.1.5.5

Counter

read-only

The number of ICMP Parameter Problem messages received.

CTR icmpInSrcQuenchs

1.3.6.1.2.1.5.6

Counter

read-only

The number of ICMP Source Quench messages received.

CTR icmpInRedirects

1.3.6.1.2.1.5.7

Counter

read-only

The number of ICMP Redirect messages received.

CTR icmpInEchos

1.3.6.1.2.1.5.8

Counter

read-only

The number of ICMP Echo (request) messages received.

CTR icmpInEchoReps

1.3.6.1.2.1.5.9

Counter

read-only

The number of ICMP Echo Reply messages received.

CTR icmpInTimestamps

1.3.6.1.2.1.5.10

Counter

read-only

The number of ICMP Timestamp (request) messages received.

CTR icmpInTimestampReps

1.3.6.1.2.1.5.11

Counter

read-only

The number of ICMP Timestamp Reply messages received.

CTR icmpInAddrMasks

1.3.6.1.2.1.5.12

Counter

read-only

The number of ICMP Address Mask Request messages received.

CTR icmpInAddrMaskReps

1.3.6.1.2.1.5.13

Counter

read-only

The number of ICMP Address Mask Reply messages received.

CTR icmpOutMsgs

1.3.6.1.2.1.5.14

Counter

read-only

The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by icmpOutErrors.

CTR icmpOutErrors

1.3.6.1.2.1.5.15

Counter

read-only

The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of IP to route the resultant datagram. In some implementations there may be no types of error which contribute to this counter's value.

CTR icmpOutDestUnreachs

1.3.6.1.2.1.5.16

Counter

read-only

The number of ICMP Destination Unreachable messages sent.

CTR icmpOutTimeExcds

1.3.6.1.2.1.5.17

Counter

read-only

The number of ICMP Time Exceeded messages sent.

CTR icmpOutParmProbs

1.3.6.1.2.1.5.18

Counter

read-only

The number of ICMP Parameter Problem messages sent.

CTR icmpOutSrcQuenchs

1.3.6.1.2.1.5.19

Counter

read-only

The number of ICMP Source Quench messages sent.

CTR icmpOutRedirects

1.3.6.1.2.1.5.20

Counter

read-only

The number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects.

CTR icmpOutEchos

1.3.6.1.2.1.5.21

Counter

read-only

The number of ICMP Echo (request) messages sent.

CTR icmpOutEchoReps

1.3.6.1.2.1.5.22

Counter

read-only

The number of ICMP Echo Reply messages sent.

CTR icmpOutTimestamps

1.3.6.1.2.1.5.23

Counter

read-only

The number of ICMP Timestamp (request) messages sent.

CTR icmpOutTimestampReps

1.3.6.1.2.1.5.24

Counter

read-only

The number of ICMP Timestamp Reply messages sent.

CTR icmpOutAddrMasks

1.3.6.1.2.1.5.25

Counter

read-only

The number of ICMP Address Mask Request messages sent.

CTR icmpOutAddrMaskReps

1.3.6.1.2.1.5.26

Counter

read-only

The number of ICMP Address Mask Reply messages sent.

tcp

1.3.6.1.2.1.6

INT tcpRtoAlgorithm

1.3.6.1.2.1.6.1

INTEGER

read-only

The algorithm used to determine the timeout value used for retransmitting unacknowledged octets.

INT tcpRtoMin

1.3.6.1.2.1.6.2

INTEGER

read-only

The minimum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission timeout. In particular, when the timeout algorithm is rsre(3), an object of this type has the semantics of the LBOUND quantity described in RFC 793.

INT tcpRtoMax

1.3.6.1.2.1.6.3

INTEGER

read-only

The maximum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission timeout. In particular, when the timeout algorithm is rsre(3), an object of this type has the semantics of the UBOUND quantity described in RFC 793.

INT tcpMaxConn

1.3.6.1.2.1.6.4

INTEGER

read-only

The limit on the total number of TCP connections the entity can support. In entities where the maximum number of connections is dynamic, this object should contain the value -1.

CTR tcpActiveOpens

1.3.6.1.2.1.6.5

Counter

read-only

The number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSED state.

CTR tcpPassiveOpens

1.3.6.1.2.1.6.6

Counter

read-only

The number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state.

CTR tcpAttemptFails

1.3.6.1.2.1.6.7

Counter

read-only

The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state.

CTR tcpEstabResets

1.3.6.1.2.1.6.8

Counter

read-only

The number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state.

GAU tcpCurrEstab

1.3.6.1.2.1.6.9

Gauge

read-only

The number of TCP connections for which the current state is either ESTABLISHED or CLOSE- WAIT.

CTR tcpInSegs

1.3.6.1.2.1.6.10

Counter

read-only

The total number of segments received, including those received in error. This count includes segments received on currently established connections.

CTR tcpOutSegs

1.3.6.1.2.1.6.11

Counter

read-only

The total number of segments sent, including those on current connections but excluding those containing only retransmitted octets.

CTR tcpRetransSegs

1.3.6.1.2.1.6.12

Counter

read-only

The total number of segments retransmitted - that is, the number of TCP segments transmitted containing one or more previously transmitted octets.

tcpConnTable

1.3.6.1.2.1.6.13

not-accessible

A table containing TCP connection-specific information.

tcpConnEntry

1.3.6.1.2.1.6.13.1

not-accessible

Information about a particular current TCP connection. An object of this type is transient, in that it ceases to exist when (or soon after) the connection makes the transition to the CLOSED state.

INT tcpConnState

1.3.6.1.2.1.6.13.1.1

INTEGER

read-write

The state of this TCP connection. The only value which may be set by a management station is deleteTCB(12). Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to set this object to any other value. If a management station sets this object to the value deleteTCB(12), then this has the effect of deleting the TCB (as defined in RFC 793) of the corresponding connection on the managed node, resulting in immediate termination of the connection. As an implementation-specific option, a RST segment may be sent from the managed node to the other TCP endpoint (note however that RST segments are not sent reliably).

IP tcpConnLocalAddress

1.3.6.1.2.1.6.13.1.2

IpAddress

read-only

The local IP address for this TCP connection. In the case of a connection in the listen state which is willing to accept connections for any IP interface associated with the node, the value 0.0.0.0 is used.

INT tcpConnLocalPort

1.3.6.1.2.1.6.13.1.3

INTEGER

read-only

The local port number for this TCP connection.

IP tcpConnRemAddress

1.3.6.1.2.1.6.13.1.4

IpAddress

read-only

The remote IP address for this TCP connection.

INT tcpConnRemPort

1.3.6.1.2.1.6.13.1.5

INTEGER

read-only

The remote port number for this TCP connection.

CTR tcpInErrs

1.3.6.1.2.1.6.14

Counter

read-only

The total number of segments received in error (e.g., bad TCP checksums).

CTR tcpOutRsts

1.3.6.1.2.1.6.15

Counter

read-only

The number of TCP segments sent containing the RST flag.

udp

1.3.6.1.2.1.7

CTR udpInDatagrams

1.3.6.1.2.1.7.1

Counter

read-only

The total number of UDP datagrams delivered to UDP users.

CTR udpNoPorts

1.3.6.1.2.1.7.2

Counter

read-only

The total number of received UDP datagrams for which there was no application at the destination port.

CTR udpInErrors

1.3.6.1.2.1.7.3

Counter

read-only

The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port.

CTR udpOutDatagrams

1.3.6.1.2.1.7.4

Counter

read-only

The total number of UDP datagrams sent from this entity.

udpTable

1.3.6.1.2.1.7.5

not-accessible

A table containing UDP listener information.

udpEntry

1.3.6.1.2.1.7.5.1

not-accessible

Information about a particular current UDP listener.

IP udpLocalAddress

1.3.6.1.2.1.7.5.1.1

IpAddress

read-only

The local IP address for this UDP listener. In the case of a UDP listener which is willing to accept datagrams for any IP interface associated with the node, the value 0.0.0.0 is used.

INT udpLocalPort

1.3.6.1.2.1.7.5.1.2

INTEGER

read-only

The local port number for this UDP listener.

egp

1.3.6.1.2.1.8

CTR egpInMsgs

1.3.6.1.2.1.8.1

Counter

read-only

The number of EGP messages received without error.

CTR egpInErrors

1.3.6.1.2.1.8.2

Counter

read-only

The number of EGP messages received that proved to be in error.

CTR egpOutMsgs

1.3.6.1.2.1.8.3

Counter

read-only

The total number of locally generated EGP messages.

CTR egpOutErrors

1.3.6.1.2.1.8.4

Counter

read-only

The number of locally generated EGP messages not sent due to resource limitations within an EGP entity.

egpNeighTable

1.3.6.1.2.1.8.5

not-accessible

The EGP neighbor table.

egpNeighEntry

1.3.6.1.2.1.8.5.1

not-accessible

Information about this entity's relationship with a particular EGP neighbor.

INT egpNeighState

1.3.6.1.2.1.8.5.1.1

INTEGER

read-only

The EGP state of the local system with respect to this entry's EGP neighbor. Each EGP state is represented by a value that is one greater than the numerical value associated with said state in RFC 904.

IP egpNeighAddr

1.3.6.1.2.1.8.5.1.2

IpAddress

read-only

The IP address of this entry's EGP neighbor.

INT egpNeighAs

1.3.6.1.2.1.8.5.1.3

INTEGER

read-only

The autonomous system of this EGP peer. Zero should be specified if the autonomous system number of the neighbor is not yet known.

CTR egpNeighInMsgs

1.3.6.1.2.1.8.5.1.4

Counter

read-only

The number of EGP messages received without error from this EGP peer.

CTR egpNeighInErrs

1.3.6.1.2.1.8.5.1.5

Counter

read-only

The number of EGP messages received from this EGP peer that proved to be in error (e.g., bad EGP checksum).

CTR egpNeighOutMsgs

1.3.6.1.2.1.8.5.1.6

Counter

read-only

The number of locally generated EGP messages to this EGP peer.

CTR egpNeighOutErrs

1.3.6.1.2.1.8.5.1.7

Counter

read-only

The number of locally generated EGP messages not sent to this EGP peer due to resource limitations within an EGP entity.

CTR egpNeighInErrMsgs

1.3.6.1.2.1.8.5.1.8

Counter

read-only

The number of EGP-defined error messages received from this EGP peer.

CTR egpNeighOutErrMsgs

1.3.6.1.2.1.8.5.1.9

Counter

read-only

The number of EGP-defined error messages sent to this EGP peer.

CTR egpNeighStateUps

1.3.6.1.2.1.8.5.1.10

Counter

read-only

The number of EGP state transitions to the UP state with this EGP peer.

CTR egpNeighStateDowns

1.3.6.1.2.1.8.5.1.11

Counter

read-only

The number of EGP state transitions from the UP state to any other state with this EGP peer.

INT egpNeighIntervalHello

1.3.6.1.2.1.8.5.1.12

INTEGER

read-only

The interval between EGP Hello command retransmissions (in hundredths of a second). This represents the t1 timer as defined in RFC 904.

INT egpNeighIntervalPoll

1.3.6.1.2.1.8.5.1.13

INTEGER

read-only

The interval between EGP poll command retransmissions (in hundredths of a second). This represents the t3 timer as defined in RFC 904.

INT egpNeighMode

1.3.6.1.2.1.8.5.1.14

INTEGER

read-only

The polling mode of this EGP entity, either passive or active.

INT egpNeighEventTrigger

1.3.6.1.2.1.8.5.1.15

INTEGER

read-write

A control variable used to trigger operator- initiated Start and Stop events. When read, this variable always returns the most recent value that egpNeighEventTrigger was set to. If it has not been set since the last initialization of the network management subsystem on the node, it returns a value of `stop'. When set, this variable causes a Start or Stop event on the specified neighbor, as specified on pages 8-10 of RFC 904. Briefly, a Start event causes an Idle peer to begin neighbor acquisition and a non-Idle peer to reinitiate neighbor acquisition. A stop event causes a non-Idle peer to return to the Idle state until a Start event occurs, either via egpNeighEventTrigger or otherwise.

INT egpAs

1.3.6.1.2.1.8.6

INTEGER

read-only

The autonomous system number of this EGP entity.

transmission

1.3.6.1.2.1.10

x25

1.3.6.1.2.1.10.5

NTF x25Restart

1.3.6.1.2.1.10.5.0.1

This trap means the X.25 PLE sent or received a restart packet. The restart that brings up the link should not send a x25Restart trap so the interface should send a linkUp trap. Sending this trap means the agent does not send a linkDown and linkUp trap.

NTF x25Reset

1.3.6.1.2.1.10.5.0.2

If the PLE sends or receives a reset, the agent should send an x25Reset trap.

x25AdmnTable

1.3.6.1.2.1.10.5.1

not-accessible

This table contains the administratively set configuration parameters for an X.25 Packet Level Entity (PLE). Most of the objects in this table have corresponding objects in the x25OperTable. This table contains the values as last set by the administrator. The x25OperTable contains the values actually in use by an X.25 PLE. Changing an administrative value may or may not change a current operating value. The operating value may not change until the interface is restarted. Some implementations may change the values immediately upon changing the administrative table. All implementations are required to load the values from the administrative table when initializing a PLE.

x25AdmnEntry

1.3.6.1.2.1.10.5.1.1

not-accessible

Entries of x25AdmnTable.

IFI x25AdmnIndex

1.3.6.1.2.1.10.5.1.1.1

IfIndexType

read-only

The ifIndex value for the X.25 Interface.

INT x25AdmnInterfaceMode

1.3.6.1.2.1.10.5.1.1.2

INTEGER

read-write

Identifies DCE/DTE mode in which the interface operates. A value of dxe indicates the mode will be determined by XID negotiation.

INT x25AdmnMaxActiveCircuits

1.3.6.1.2.1.10.5.1.1.3

INTEGER

read-write

The maximum number of circuits this PLE can support; including PVCs.

INT x25AdmnPacketSequencing

1.3.6.1.2.1.10.5.1.1.4

INTEGER

read-write

The modulus of the packet sequence number space.

NUM x25AdmnRestartTimer

1.3.6.1.2.1.10.5.1.1.5

PositiveInteger

read-write

The T20 restart timer in milliseconds.

NUM x25AdmnCallTimer

1.3.6.1.2.1.10.5.1.1.6

PositiveInteger

read-write

The T21 Call timer in milliseconds.

NUM x25AdmnResetTimer

1.3.6.1.2.1.10.5.1.1.7

PositiveInteger

read-write

The T22 Reset timer in milliseconds.

NUM x25AdmnClearTimer

1.3.6.1.2.1.10.5.1.1.8

PositiveInteger

read-write

The T23 Clear timer in milliseconds.

NUM x25AdmnWindowTimer

1.3.6.1.2.1.10.5.1.1.9

PositiveInteger

read-write

The T24 window status transmission timer in milliseconds. A value of 2147483647 indicates no window timer in use.

NUM x25AdmnDataRxmtTimer

1.3.6.1.2.1.10.5.1.1.10

PositiveInteger

read-write

The T25 data retransmission timer in milliseconds. A value of 2147483647 indicates no data retransmission timer in use.

NUM x25AdmnInterruptTimer

1.3.6.1.2.1.10.5.1.1.11

PositiveInteger

read-write

The T26 interrupt timer in milliseconds. A value of 2147483647 indicates no interrupt timer in use.

NUM x25AdmnRejectTimer

1.3.6.1.2.1.10.5.1.1.12

PositiveInteger

read-write

The T27 Reject retransmission timer in milliseconds. A value of 2147483647 indicates no reject timer in use.

NUM x25AdmnRegistrationRequestTimer

1.3.6.1.2.1.10.5.1.1.13

PositiveInteger

read-write

The T28 registration timer in milliseconds. A value of 2147483647 indicates no registration timer in use.

NUM x25AdmnMinimumRecallTimer

1.3.6.1.2.1.10.5.1.1.14

PositiveInteger

read-write

Minimum time interval between unsuccessful call attempts in milliseconds.

INT x25AdmnRestartCount

1.3.6.1.2.1.10.5.1.1.15

INTEGER

read-write

The R20 restart retransmission count.

INT x25AdmnResetCount

1.3.6.1.2.1.10.5.1.1.16

INTEGER

read-write

The r22 Reset retransmission count.

INT x25AdmnClearCount

1.3.6.1.2.1.10.5.1.1.17

INTEGER

read-write

The r23 Clear retransmission count.

INT x25AdmnDataRxmtCount

1.3.6.1.2.1.10.5.1.1.18

INTEGER

read-write

The R25 Data retransmission count. This value is irrelevant if the x25AdmnDataRxmtTimer indicates no timer in use.

INT x25AdmnRejectCount

1.3.6.1.2.1.10.5.1.1.19

INTEGER

read-write

The R27 reject retransmission count. This value is irrelevant if the x25AdmnRejectTimer indicates no timer in use.

INT x25AdmnRegistrationRequestCount

1.3.6.1.2.1.10.5.1.1.20

INTEGER

read-write

The R28 Registration retransmission Count. This value is irrelevant if the x25AdmnRegistrationRequestTimer indicates no timer in use.

INT x25AdmnNumberPVCs

1.3.6.1.2.1.10.5.1.1.21

INTEGER

read-write

The number of PVC configured for this PLE. The PVCs use channel numbers from 1 to this number.

OID x25AdmnDefCallParamId

1.3.6.1.2.1.10.5.1.1.22

OBJECT IDENTIFIER

read-write

This identifies the instance of the x25CallParmIndex for the entry in the x25CallParmTable which contains the default call parameters for this PLE.

ADR x25AdmnLocalAddress

1.3.6.1.2.1.10.5.1.1.23

X121Address

read-write

The local address for this PLE subnetwork. A zero length address maybe returned by PLEs that only support PVCs.

OID x25AdmnProtocolVersionSupported

1.3.6.1.2.1.10.5.1.1.24

OBJECT IDENTIFIER

read-write

Identifies the version of the X.25 protocol this interface should support. Object identifiers for common versions are defined below in the x25ProtocolVersion subtree.

x25OperTable

1.3.6.1.2.1.10.5.2

not-accessible

The operation parameters in use by the X.25 PLE.

x25OperEntry

1.3.6.1.2.1.10.5.2.1

not-accessible

Entries of x25OperTable.

IFI x25OperIndex

1.3.6.1.2.1.10.5.2.1.1

IfIndexType

read-only

The ifIndex value for the X.25 interface.

INT x25OperInterfaceMode

1.3.6.1.2.1.10.5.2.1.2

INTEGER

read-only

Identifies DCE/DTE mode in which the interface operates. A value of dxe indicates the role will be determined by XID negotiation at the Link Layer and that negotiation has not yet taken place.

INT x25OperMaxActiveCircuits

1.3.6.1.2.1.10.5.2.1.3

INTEGER

read-only

Maximum number of circuits this PLE can support.

INT x25OperPacketSequencing

1.3.6.1.2.1.10.5.2.1.4

INTEGER

read-only

The modulus of the packet sequence number space.

NUM x25OperRestartTimer

1.3.6.1.2.1.10.5.2.1.5

PositiveInteger

read-only

The T20 restart timer in milliseconds.

NUM x25OperCallTimer

1.3.6.1.2.1.10.5.2.1.6

PositiveInteger

read-only

The T21 Call timer in milliseconds.

NUM x25OperResetTimer

1.3.6.1.2.1.10.5.2.1.7

PositiveInteger

read-only

The T22 Reset timer in milliseconds.

NUM x25OperClearTimer

1.3.6.1.2.1.10.5.2.1.8

PositiveInteger

read-only

The T23 Clear timer in milliseconds.

NUM x25OperWindowTimer

1.3.6.1.2.1.10.5.2.1.9

PositiveInteger

read-only

The T24 window status transmission timer milliseconds. A value of 2147483647 indicates no window timer in use.

NUM x25OperDataRxmtTimer

1.3.6.1.2.1.10.5.2.1.10

PositiveInteger

read-only

The T25 Data Retransmission timer in milliseconds. A value of 2147483647 indicates no data retransmission timer in use.

NUM x25OperInterruptTimer

1.3.6.1.2.1.10.5.2.1.11

PositiveInteger

read-only

The T26 Interrupt timer in milliseconds. A value of 2147483647 indicates interrupts are not being used.

NUM x25OperRejectTimer

1.3.6.1.2.1.10.5.2.1.12

PositiveInteger

read-only

The T27 Reject retransmission timer in milliseconds. A value of 2147483647 indicates no reject timer in use.

NUM x25OperRegistrationRequestTimer

1.3.6.1.2.1.10.5.2.1.13

PositiveInteger

read-only

The T28 registration timer in milliseconds. A value of 2147483647 indicates no registration timer in use.

NUM x25OperMinimumRecallTimer

1.3.6.1.2.1.10.5.2.1.14

PositiveInteger

read-only

Minimum time interval between unsuccessful call attempts in milliseconds.

INT x25OperRestartCount

1.3.6.1.2.1.10.5.2.1.15

INTEGER

read-only

The R20 restart retransmission count.

INT x25OperResetCount

1.3.6.1.2.1.10.5.2.1.16

INTEGER

read-only

The r22 Reset retransmission count.

INT x25OperClearCount

1.3.6.1.2.1.10.5.2.1.17

INTEGER

read-only

The r23 Clear retransmission count.

INT x25OperDataRxmtCount

1.3.6.1.2.1.10.5.2.1.18

INTEGER

read-only

The R25 Data retransmission count. This value is undefined if the x25OperDataRxmtTimer indicates no timer in use.

INT x25OperRejectCount

1.3.6.1.2.1.10.5.2.1.19

INTEGER

read-only

The R27 reject retransmission count. This value is undefined if the x25OperRejectTimer indicates no timer in use.

INT x25OperRegistrationRequestCount

1.3.6.1.2.1.10.5.2.1.20

INTEGER

read-only

The R28 Registration retransmission Count. This value is undefined if the x25OperREgistrationRequestTimer indicates no timer in use.

INT x25OperNumberPVCs

1.3.6.1.2.1.10.5.2.1.21

INTEGER

read-only

The number of PVC configured for this PLE. The PVCs use channel numbers from 1 to this number.

OID x25OperDefCallParamId

1.3.6.1.2.1.10.5.2.1.22

OBJECT IDENTIFIER

read-only

This identifies the instance of the x25CallParmIndex for the entry in the x25CallParmTable that contains the default call parameters for this PLE.

ADR x25OperLocalAddress

1.3.6.1.2.1.10.5.2.1.23

X121Address

read-only

The local address for this PLE subnetwork. A zero length address maybe returned by PLEs that only support PVCs.

OID x25OperDataLinkId

1.3.6.1.2.1.10.5.2.1.24

OBJECT IDENTIFIER

read-only

This identifies the instance of the index object in the first table of the most device specific MIB for the interface used by this PLE.

OID x25OperProtocolVersionSupported

1.3.6.1.2.1.10.5.2.1.25

OBJECT IDENTIFIER

read-only

Identifies the version of the X.25 protocol this interface supports. Object identifiers for common versions are defined below in the x25ProtocolVersion subtree.

x25StatTable

1.3.6.1.2.1.10.5.3

not-accessible

Statistics information about this X.25 PLE.

x25StatEntry

1.3.6.1.2.1.10.5.3.1

not-accessible

Entries of the x25StatTable.

IFI x25StatIndex

1.3.6.1.2.1.10.5.3.1.1

IfIndexType

read-only

The ifIndex value for the X.25 interface.

CTR x25StatInCalls

1.3.6.1.2.1.10.5.3.1.2

Counter

read-only

The number of incoming calls received.

CTR x25StatInCallRefusals

1.3.6.1.2.1.10.5.3.1.3

Counter

read-only

The number of incoming calls refused. This includes calls refused by the PLE and by higher layers. This also includes calls cleared because of restricted fast select.

CTR x25StatInProviderInitiatedClears

1.3.6.1.2.1.10.5.3.1.4

Counter

read-only

The number of clear requests with a cause code other than DTE initiated.

CTR x25StatInRemotelyInitiatedResets

1.3.6.1.2.1.10.5.3.1.5

Counter

read-only

The number of reset requests received with cause code DTE initiated.

CTR x25StatInProviderInitiatedResets

1.3.6.1.2.1.10.5.3.1.6

Counter

read-only

The number of reset requests received with cause code other than DTE initiated.

CTR x25StatInRestarts

1.3.6.1.2.1.10.5.3.1.7

Counter

read-only

The number of remotely initiated (including provider initiated) restarts experienced by the PLE excluding the restart associated with bringing up the PLE interface. This only counts restarts received when the PLE already has an established connection with the remove PLE.

CTR x25StatInDataPackets

1.3.6.1.2.1.10.5.3.1.8

Counter

read-only

The number of data packets received.

CTR x25StatInAccusedOfProtocolErrors

1.3.6.1.2.1.10.5.3.1.9

Counter

read-only

The number of packets received containing a procedure error cause code. These include clear, reset, restart, or diagnostic packets.

CTR x25StatInInterrupts

1.3.6.1.2.1.10.5.3.1.10

Counter

read-only

The number of interrupt packets received by the PLE or over the PVC/VC.

CTR x25StatOutCallAttempts

1.3.6.1.2.1.10.5.3.1.11

Counter

read-only

The number of calls attempted.

CTR x25StatOutCallFailures

1.3.6.1.2.1.10.5.3.1.12

Counter

read-only

The number of call attempts which failed. This includes calls that were cleared because of restrictive fast select.

CTR x25StatOutInterrupts

1.3.6.1.2.1.10.5.3.1.13

Counter

read-only

The number of interrupt packets send by the PLE or over the PVC/VC.

CTR x25StatOutDataPackets

1.3.6.1.2.1.10.5.3.1.14

Counter

read-only

The number of data packets sent by this PLE.

GAU x25StatOutgoingCircuits

1.3.6.1.2.1.10.5.3.1.15

Gauge

read-only

The number of active outgoing circuits. This includes call requests sent but not yet confirmed. This does not count PVCs.

GAU x25StatIncomingCircuits

1.3.6.1.2.1.10.5.3.1.16

Gauge

read-only

The number of active Incoming Circuits. This includes call indications received but not yet acknowledged. This does not count PVCs.

GAU x25StatTwowayCircuits

1.3.6.1.2.1.10.5.3.1.17

Gauge

read-only

The number of active two-way Circuits. This includes call requests sent but not yet confirmed. This does not count PVCs.

CTR x25StatRestartTimeouts

1.3.6.1.2.1.10.5.3.1.18

Counter

read-only

The number of times the T20 restart timer expired.

CTR x25StatCallTimeouts

1.3.6.1.2.1.10.5.3.1.19

Counter

read-only

The number of times the T21 call timer expired.

CTR x25StatResetTimeouts

1.3.6.1.2.1.10.5.3.1.20

Counter

read-only

The number of times the T22 reset timer expired.

CTR x25StatClearTimeouts

1.3.6.1.2.1.10.5.3.1.21

Counter

read-only

The number of times the T23 clear timer expired.

CTR x25StatDataRxmtTimeouts

1.3.6.1.2.1.10.5.3.1.22

Counter

read-only

The number of times the T25 data timer expired.

CTR x25StatInterruptTimeouts

1.3.6.1.2.1.10.5.3.1.23

Counter

read-only

The number of times the T26 interrupt timer expired.

CTR x25StatRetryCountExceededs

1.3.6.1.2.1.10.5.3.1.24

Counter

read-only

The number of times a retry counter was exhausted.

CTR x25StatClearCountExceededs

1.3.6.1.2.1.10.5.3.1.25

Counter

read-only

The number of times the R23 clear count was exceeded.

x25ChannelTable

1.3.6.1.2.1.10.5.4

not-accessible

These objects contain information about the channel number configuration in an X.25 PLE. These values are the configured values. changes in these values after the interfaces has started may not be reflected in the operating PLE.

x25ChannelEntry

1.3.6.1.2.1.10.5.4.1

not-accessible

Entries of x25ChannelTable.

IFI x25ChannelIndex

1.3.6.1.2.1.10.5.4.1.1

IfIndexType

read-only

The ifIndex value for the X.25 Interface.

INT x25ChannelLIC

1.3.6.1.2.1.10.5.4.1.2

INTEGER

read-write

Lowest Incoming channel.

INT x25ChannelHIC

1.3.6.1.2.1.10.5.4.1.3

INTEGER

read-write

Highest Incoming channel. A value of zero indicates no channels in this range.

INT x25ChannelLTC

1.3.6.1.2.1.10.5.4.1.4

INTEGER

read-write

Lowest Two-way channel.

INT x25ChannelHTC

1.3.6.1.2.1.10.5.4.1.5

INTEGER

read-write

Highest Two-way channel. A value of zero indicates no channels in this range.

INT x25ChannelLOC

1.3.6.1.2.1.10.5.4.1.6

INTEGER

read-write

Lowest outgoing channel.

INT x25ChannelHOC

1.3.6.1.2.1.10.5.4.1.7

INTEGER

read-write

Highest outgoing channel. A value of zero indicates no channels in this range.

x25CircuitTable

1.3.6.1.2.1.10.5.5

not-accessible

These objects contain general information about a specific circuit of an X.25 PLE.

x25CircuitEntry

1.3.6.1.2.1.10.5.5.1

not-accessible

Entries of x25CircuitTable.

IFI x25CircuitIndex

1.3.6.1.2.1.10.5.5.1.1

IfIndexType

read-only

The ifIndex value for the X.25 Interface.

INT x25CircuitChannel

1.3.6.1.2.1.10.5.5.1.2

INTEGER

read-only

The channel number for this circuit.

INT x25CircuitStatus

1.3.6.1.2.1.10.5.5.1.3

INTEGER

read-write

This object reports the current status of the circuit. An existing instance of this object can only be set to startClear, startPvcResetting, or invalid. An instance with the value calling or open can only be set to startClear and that action will start clearing the circuit. An instance with the value PVC can only be set to startPvcResetting or invalid and that action resets the PVC or deletes the circuit respectively. The values startClear or startPvcResetting will never be returned by an agent. An attempt to set the status of an existing instance to a value other than one of these values will result in an error. A non-existing instance can be set to PVC to create a PVC if the implementation supports dynamic creation of PVCs. Some implementations may only allow creation and deletion of PVCs if the interface is down. Since the instance identifier will supply the PLE index and the channel number, setting this object alone supplies sufficient information to create the instance. All the DEFVAL clauses for the other objects of this table are appropriate for creating a PVC; PLEs creating entries for placed or accepted calls will use values appropriate for the call rather than the value of the DEFVAL clause. Two managers trying to create the same PVC can determine from the return code which manager succeeded and which failed (the failing manager fails because it can not set a value of PVC for an existing object). An entry in the closed or invalid state may be deleted or reused at the agent's convence. If the entry is kept in the closed state, the values of the parameters associated with the entry must be correct. Closed implies the values in the circuit table are correct. The value of invalid indicates the other values in the table are invalid. Many agents may never return a value of invalid because they dynamically allocate and free unused table entries. An agent for a statically configured systems can return invalid to indicate the entry has not yet been used so the counters contain no information.

TIK x25CircuitEstablishTime

1.3.6.1.2.1.10.5.5.1.4

TimeTicks

read-only

The value of sysUpTime when the channel was associated with this circuit. For outgoing SVCs, this is the time the first call packet was sent. For incoming SVCs, this is the time the call indication was received. For PVCs this is the time the PVC was able to pass data to a higher layer entity without loss of data.

INT x25CircuitDirection

1.3.6.1.2.1.10.5.5.1.5

INTEGER

read-write

The direction of the call that established this circuit.

CTR x25CircuitInOctets

1.3.6.1.2.1.10.5.5.1.6

Counter

read-only

The number of octets of user data delivered to upper layer.

CTR x25CircuitInPdus

1.3.6.1.2.1.10.5.5.1.7

Counter

read-only

The number of PDUs received for this circuit.

CTR x25CircuitInRemotelyInitiatedResets

1.3.6.1.2.1.10.5.5.1.8

Counter

read-only

The number of Resets received for this circuit with cause code of DTE initiated.

CTR x25CircuitInProviderInitiatedResets

1.3.6.1.2.1.10.5.5.1.9

Counter

read-only

The number of Resets received for this circuit with cause code other than DTE initiated.

CTR x25CircuitInInterrupts

1.3.6.1.2.1.10.5.5.1.10

Counter

read-only

The number of interrupt packets received for this circuit.

CTR x25CircuitOutOctets

1.3.6.1.2.1.10.5.5.1.11

Counter

read-only

The number of octets of user data sent for this circuit.

CTR x25CircuitOutPdus

1.3.6.1.2.1.10.5.5.1.12

Counter

read-only

The number of PDUs sent for this circuit.

CTR x25CircuitOutInterrupts

1.3.6.1.2.1.10.5.5.1.13

Counter

read-only

The number of interrupt packets sent on this circuit.

CTR x25CircuitDataRetransmissionTimeouts

1.3.6.1.2.1.10.5.5.1.14

Counter

read-only

The number of times the T25 data retransmission timer expired for this circuit.

CTR x25CircuitResetTimeouts

1.3.6.1.2.1.10.5.5.1.15

Counter

read-only

The number of times the T22 reset timer expired for this circuit.

CTR x25CircuitInterruptTimeouts

1.3.6.1.2.1.10.5.5.1.16

Counter

read-only

The number of times the T26 Interrupt timer expired for this circuit.

OID x25CircuitCallParamId

1.3.6.1.2.1.10.5.5.1.17

OBJECT IDENTIFIER

read-write

This identifies the instance of the x25CallParmIndex for the entry in the x25CallParmTable which contains the call parameters in use with this circuit. The entry referenced must contain the values that are currently in use by the circuit rather than proposed values. A value of NULL indicates the circuit is a PVC or is using all the default parameters.

ADR x25CircuitCalledDteAddress

1.3.6.1.2.1.10.5.5.1.18

X121Address

read-write

For incoming calls, this is the called address from the call indication packet. For outgoing calls, this is the called address from the call confirmation packet. This will be zero length for PVCs.

ADR x25CircuitCallingDteAddress

1.3.6.1.2.1.10.5.5.1.19

X121Address

read-write

For incoming calls, this is the calling address from the call indication packet. For outgoing calls, this is the calling address from the call confirmation packet. This will be zero length for PVCs.

ADR x25CircuitOriginallyCalledAddress

1.3.6.1.2.1.10.5.5.1.20

X121Address

read-write

For incoming calls, this is the address in the call Redirection or Call Deflection Notification facility if the call was deflected or redirected, otherwise it will be called address from the call indication packet. For outgoing calls, this is the address from the call request packet. This will be zero length for PVCs.

STR x25CircuitDescr

1.3.6.1.2.1.10.5.5.1.21

DisplayString

read-write

A descriptive string associated with this circuit. This provides a place for the agent to supply any descriptive information it knows about the use or owner of the circuit. The agent may return the process identifier and user name for the process using the circuit. Alternative the agent may return the name of the configuration entry that caused a bridge to establish the circuit. A zero length value indicates the agent doesn't have any additional information.

NUM x25ClearedCircuitEntriesRequested

1.3.6.1.2.1.10.5.6

PositiveInteger

read-write

The requested number of entries for the agent to keep in the x25ClearedCircuit table.

NUM x25ClearedCircuitEntriesGranted

1.3.6.1.2.1.10.5.7

PositiveInteger

read-only

The actual number of entries the agent will keep in the x25ClearedCircuit Table.

x25ClearedCircuitTable

1.3.6.1.2.1.10.5.8

not-accessible

A table of entries about closed circuits. Entries must be made in this table whenever circuits are closed and the close request or close indication packet contains a clearing cause other than DTE Originated or a Diagnostic code field other than Higher Layer Initiated disconnection-normal. An agent may optionally make entries for normal closes (to record closing facilities or other information). Agents will delete the oldest entry in the table when adding a new entry would exceed agent resources. Agents are required to keep the last entry put in the table and may keep more entries. The object x25OperClearEntriesGranted returns the maximum number of entries kept in the table.

x25ClearedCircuitEntry

1.3.6.1.2.1.10.5.8.1

not-accessible

Information about a cleared circuit.

NUM x25ClearedCircuitIndex

1.3.6.1.2.1.10.5.8.1.1

PositiveInteger

read-only

An index that uniquely distinguishes one entry in the clearedCircuitTable from another. This index will start at 2147483647 and will decrease by one for each new entry added to the table. Upon reaching one, the index will reset to 2147483647. Because the index starts at 2147483647 and decreases, a manager may do a getnext on entry zero and obtain the most recent entry. When the index has the value of 1, the next entry will delete all entries in the table and that entry will be numbered 2147483647.

IFI x25ClearedCircuitPleIndex

1.3.6.1.2.1.10.5.8.1.2

IfIndexType

read-only

The value of ifIndex for the PLE which cleared the circuit that created the entry.

TIK x25ClearedCircuitTimeEstablished

1.3.6.1.2.1.10.5.8.1.3

TimeTicks

read-only

The value of sysUpTime when the circuit was established. This will be the same value that was in the x25CircuitEstablishTime for the circuit.

TIK x25ClearedCircuitTimeCleared

1.3.6.1.2.1.10.5.8.1.4

TimeTicks

read-only

The value of sysUpTime when the circuit was cleared. For locally initiated clears, this will be the time when the clear confirmation was received. For remotely initiated clears, this will be the time when the clear indication was received.

INT x25ClearedCircuitChannel

1.3.6.1.2.1.10.5.8.1.5

INTEGER

read-only

The channel number for the circuit that was cleared.

INT x25ClearedCircuitClearingCause

1.3.6.1.2.1.10.5.8.1.6

INTEGER

read-only

The Clearing Cause from the clear request or clear indication packet that cleared the circuit.

INT x25ClearedCircuitDiagnosticCode

1.3.6.1.2.1.10.5.8.1.7

INTEGER

read-only

The Diagnostic Code from the clear request or clear indication packet that cleared the circuit.

CTR x25ClearedCircuitInPdus

1.3.6.1.2.1.10.5.8.1.8

Counter

read-only

The number of PDUs received on the circuit.

CTR x25ClearedCircuitOutPdus

1.3.6.1.2.1.10.5.8.1.9

Counter

read-only

The number of PDUs transmitted on the circuit.

ADR x25ClearedCircuitCalledAddress

1.3.6.1.2.1.10.5.8.1.10

X121Address

read-only

The called address from the cleared circuit.

ADR x25ClearedCircuitCallingAddress

1.3.6.1.2.1.10.5.8.1.11

X121Address

read-only

The calling address from the cleared circuit.

OCT x25ClearedCircuitClearFacilities

1.3.6.1.2.1.10.5.8.1.12

OCTET STRING

read-only

The facilities field from the clear request or clear indication packet that cleared the circuit. A size of zero indicates no facilities were present.

x25CallParmTable

1.3.6.1.2.1.10.5.9

not-accessible

These objects contain the parameters that can be varied between X.25 calls. The entries in this table are independent of the PLE. There exists only one of these tables for the entire system. The indexes for the entries are independent of any PLE or any circuit. Other tables reference entries in this table. Entries in this table can be used for default PLE parameters, for parameters to use to place/answer a call, for the parameters currently in use for a circuit, or parameters that were used by a circuit. The number of references to a given set of parameters can be found in the x25CallParmRefCount object sharing the same instance identifier with the parameters. The value of this reference count also affects the access of the objects in this table. An object in this table with the same instance identifier as the instance identifier of an x25CallParmRefCount must be consider associated with that reference count. An object with an associated reference count of zero can be written (if its ACCESS clause allows it). An object with an associated reference count greater than zero can not be written (regardless of the ACCESS clause). This ensures that a set of call parameters being referenced from another table can not be modified or changed in a ways inappropriate for continued use by that table.

x25CallParmEntry

1.3.6.1.2.1.10.5.9.1

not-accessible

Entries of x25CallParmTable.

NUM x25CallParmIndex

1.3.6.1.2.1.10.5.9.1.1

PositiveInteger

read-only

A value that distinguishes this entry from another entry. Entries in this table are referenced from other objects which identify call parameters. It is impossible to know which other objects in the MIB reference entries in the table by looking at this table. Because of this, changes to parameters must be accomplished by creating a new entry in this table and then changing the referencing table to identify the new entry. Note that an agent will only use the values in this table when another table is changed to reference those values. The number of other tables that reference an index object in this table can be found in x25CallParmRefCount. The value of the reference count will affect the writability of the objects as explained above. Entries in this table which have a reference count of zero maybe deleted at the convence of the agent. Care should be taken by the agent to give the NMS sufficient time to create a reference to newly created entries. Should a Management Station not find a free index with which to create a new entry, it may feel free to delete entries with a reference count of zero. However in doing so the Management Station much realize it may impact other Management Stations.

ENT x25CallParmStatus

1.3.6.1.2.1.10.5.9.1.2

EntryStatus

read-write

The status of this call parameter entry. See RFC 1271 for details of usage.

NUM x25CallParmRefCount

1.3.6.1.2.1.10.5.9.1.3

PositiveInteger

read-only

The number of references know by a management station to exist to this set of call parameters. This is the number of other objects that have returned a value of, and will return a value of, the index for this set of call parameters. Examples of such objects are the x25AdmnDefCallParamId, x25OperDataLinkId, or x25AdmnDefCallParamId objects defined above.

INT x25CallParmInPacketSize

1.3.6.1.2.1.10.5.9.1.4

INTEGER

read-write

The maximum receive packet size in octets for a circuit. A size of zero for a circuit means use the PLE default size. A size of zero for the PLE means use a default size of 128.

INT x25CallParmOutPacketSize

1.3.6.1.2.1.10.5.9.1.5

INTEGER

read-write

The maximum transmit packet size in octets for a circuit. A size of zero for a circuit means use the PLE default size. A size of zero for the PLE default means use a default size of 128.

INT x25CallParmInWindowSize

1.3.6.1.2.1.10.5.9.1.6

INTEGER

read-write

The receive window size for a circuit. A size of zero for a circuit means use the PLE default size. A size of zero for the PLE default means use 2.

INT x25CallParmOutWindowSize

1.3.6.1.2.1.10.5.9.1.7

INTEGER

read-write

The transmit window size for a circuit. A size of zero for a circuit means use the PLE default size. A size of zero for the PLE default means use 2.

INT x25CallParmAcceptReverseCharging

1.3.6.1.2.1.10.5.9.1.8

INTEGER

read-write

An enumeration defining if the PLE will accept or refuse charges. A value of default for a circuit means use the PLE default value. A value of neverAccept is only used for the PLE default and indicates the PLE will never accept reverse charging. A value of default for a PLE default means refuse.

INT x25CallParmProposeReverseCharging

1.3.6.1.2.1.10.5.9.1.9

INTEGER

read-write

An enumeration defining if the PLE should propose reverse or local charging. The value of default for a circuit means use the PLE default. The value of default for the PLE default means use local.

INT x25CallParmFastSelect

1.3.6.1.2.1.10.5.9.1.10

INTEGER

read-write

Expresses preference for use of fast select facility. The value of default for a circuit is the PLE default. A value of default for the PLE means noFastSelect. A value of noFastSelect or noRestrictedFastResponse indicates a circuit may not use fast select or restricted fast response.

INT x25CallParmInThruPutClasSize

1.3.6.1.2.1.10.5.9.1.11

INTEGER

read-write

The incoming throughput class to negotiate. A value of tcDefault for a circuit means use the PLE default. A value of tcDefault for the PLE default means tcNone. A value of tcNone means do not negotiate throughtput class.

INT x25CallParmOutThruPutClasSize

1.3.6.1.2.1.10.5.9.1.12

INTEGER

read-write

The outgoing throughput class to negotiate. A value of tcDefault for a circuit means use the PLE default. A value of tcDefault for the PLE default means use tcNone. A value of tcNone means do not negotiate throughtput class.

STR x25CallParmCug

1.3.6.1.2.1.10.5.9.1.13

DisplayString

read-write

The Closed User Group to specify. This consists of two or four octets containing the characters 0 through 9. A zero length string indicates no facility requested. A string length of three containing the characters DEF for a circuit means use the PLE default, (the PLE default parameter may not reference an entry of DEF.)

STR x25CallParmCugoa

1.3.6.1.2.1.10.5.9.1.14

DisplayString

read-write

The Closed User Group with Outgoing Access to specify. This consists of two or four octets containing the characters 0 through 9. A string length of three containing the characters DEF for a circuit means use the PLE default (the PLE default parameters may not reference an entry of DEF). A zero length string indicates no facility requested.

STR x25CallParmBcug

1.3.6.1.2.1.10.5.9.1.15

DisplayString

read-write

The Bilateral Closed User Group to specify. This consists of two octets containing the characters 0 through 9. A string length of three containing the characters DEF for a circuit means use the PLE default (the PLE default parameter may not reference an entry of DEF). A zero length string indicates no facility requested.

OCT x25CallParmNui

1.3.6.1.2.1.10.5.9.1.16

OCTET STRING

read-write

The Network User Identifier facility. This is binary value to be included immediately after the length field. The PLE will supply the length octet. A zero length string indicates no facility requested. This value is ignored for the PLE default parameters entry.

INT x25CallParmChargingInfo

1.3.6.1.2.1.10.5.9.1.17

INTEGER

read-write

The charging Information facility. A value of default for a circuit means use the PLE default. The value of default for the default PLE parameters means use noFacility. The value of noFacility means do not include a facility.

STR x25CallParmRpoa

1.3.6.1.2.1.10.5.9.1.18

DisplayString

read-write

The RPOA facility. The octet string contains n * 4 sequences of the characters 0-9 to specify a facility with n entries. The octet string containing the 3 characters DEF for a circuit specifies use of the PLE default (the entry for the PLE default may not contain DEF). A zero length string indicates no facility requested.

INT x25CallParmTrnstDly

1.3.6.1.2.1.10.5.9.1.19

INTEGER

read-write

The Transit Delay Selection and Indication value. A value of 65536 indicates no facility requested. A value of 65537 for a circuit means use the PLE default (the PLE default parameters entry may not use the value 65537). The value 65535 may only be used to indicate the value in use by a circuit.

STR x25CallParmCallingExt

1.3.6.1.2.1.10.5.9.1.20

DisplayString

read-write

The Calling Extension facility. This contains one of the following: A sequence of hex digits with the value to be put in the facility. These digits will be converted to binary by the agent and put in the facility. These octets do not include the length octet. A value containing the three character DEF for a circuit means use the PLE default, (the entry for the PLE default parameters may not use the value DEF). A zero length string indicates no facility requested.

STR x25CallParmCalledExt

1.3.6.1.2.1.10.5.9.1.21

DisplayString

read-write

The Called Extension facility. This contains one of the following: A sequence of hex digits with the value to be put in the facility. These digits will be converted to binary by the agent and put in the facility. These octets do not include the length octet. A value containing the three character DEF for a circuit means use the PLE default, (the entry for the PLE default parameters may not use the value DEF). A zero length string indicates no facility requested.

INT x25CallParmInMinThuPutCls

1.3.6.1.2.1.10.5.9.1.22

INTEGER

read-write

The minimum input throughput Class. A value of 16 for a circuit means use the PLE default (the PLE parameters entry may not use this value). A value of 17 indicates no facility requested.

INT x25CallParmOutMinThuPutCls

1.3.6.1.2.1.10.5.9.1.23

INTEGER

read-write

The minimum output throughput Class. A value of 16 for a circuit means use the PLE default (the PLE parameters entry may not use this value). A value of 17 indicates no facility requested.

OCT x25CallParmEndTrnsDly

1.3.6.1.2.1.10.5.9.1.24

OCTET STRING

read-write

The End-to-End Transit Delay to negotiate. An octet string of length 2, 4, or 6 contains the facility encoded as specified in ISO/IEC 8208 section 15.3.2.4. An octet string of length 3 containing the three character DEF for a circuit means use the PLE default (the entry for the PLE default can not contain the characters DEF). A zero length string indicates no facility requested.

OCT x25CallParmPriority

1.3.6.1.2.1.10.5.9.1.25

OCTET STRING

read-write

The priority facility to negotiate. The octet string encoded as specified in ISO/IEC 8208 section 15.3.2.5. A zero length string indicates no facility requested. The entry for the PLE default parameters must be zero length.

STR x25CallParmProtection

1.3.6.1.2.1.10.5.9.1.26

DisplayString

read-write

A string contains the following: A hex string containing the value for the protection facility. This will be converted from hex to the octets actually in the packet by the agent. The agent will supply the length field and the length octet is not contained in this string. An string containing the 3 characters DEF for a circuit means use the PLE default (the entry for the PLE default parameters may not use the value DEF). A zero length string mean no facility requested.

INT x25CallParmExptData

1.3.6.1.2.1.10.5.9.1.27

INTEGER

read-write

The Expedited Data facility to negotiate. A value of default for a circuit means use the PLE default value. The entry for the PLE default parameters may not have the value default.

OCT x25CallParmUserData

1.3.6.1.2.1.10.5.9.1.28

OCTET STRING

read-write

The call user data as placed in the packet. A zero length string indicates no call user data. If both the circuit call parameters and the PLE default have call user data defined, the data from the circuit call parameters will be used. If only the PLE has data defined, the PLE entry will be used. If neither the circuit call parameters or the PLE default entry has a value, no call user data will be sent.

OCT x25CallParmCallingNetworkFacilities

1.3.6.1.2.1.10.5.9.1.29

OCTET STRING

read-write

The calling network facilities. The facilities are encoded here exactly as encoded in the call packet. These facilities do not include the marker facility code. A zero length string in the entry for the parameter to use when establishing a circuit means use the PLE default. A zero length string in the entry for PLE default parameters indicates no default facilities.

OCT x25CallParmCalledNetworkFacilities

1.3.6.1.2.1.10.5.9.1.30

OCTET STRING

read-write

The called network facilities. The facilities are encoded here exactly as encoded in the call packet. These facilities do not include the marker facility code. A zero length string in the entry for the parameter to use when establishing a circuit means use the PLE default. A zero length string in the entry for PLE default parameters indicates no default facilities.

x25ProtocolVersion

1.3.6.1.2.1.10.5.10

x25protocolCcittV1976

1.3.6.1.2.1.10.5.10.1

x25protocolCcittV1980

1.3.6.1.2.1.10.5.10.2

x25protocolCcittV1984

1.3.6.1.2.1.10.5.10.3

x25protocolCcittV1988

1.3.6.1.2.1.10.5.10.4

x25protocolIso8208V1987

1.3.6.1.2.1.10.5.10.5

x25protocolIso8208V1989

1.3.6.1.2.1.10.5.10.6

lapb

1.3.6.1.2.1.10.16

lapbProtocolVersion

1.3.6.1.2.1.10.16.5

lapbProtocolIso7776v1986

1.3.6.1.2.1.10.16.5.1

lapbProtocolCcittV1980

1.3.6.1.2.1.10.16.5.2

lapbProtocolCcittV1984

1.3.6.1.2.1.10.16.5.3

frame_relay

1.3.6.1.2.1.10.32

NTF frDLCIStatusChange

1.3.6.1.2.1.10.32.0.1

This trap indicates that the indicated Virtual Circuit has changed state. It has either been created or invalidated, or has toggled between the active and inactive states.

frDlcmiTable

1.3.6.1.2.1.10.32.1

not-accessible

The Parameters for the Data Link Connection Management Interface for the frame relay service on this interface.

frDlcmiEntry

1.3.6.1.2.1.10.32.1.1

not-accessible

The Parameters for a particular Data Link Con- nection Management Interface.

IND frDlcmiIfIndex

1.3.6.1.2.1.10.32.1.1.1

Index

read-only

The ifIndex value of the corresponding ifEn- try.

INT frDlcmiState

1.3.6.1.2.1.10.32.1.1.2

INTEGER

read-write

This variable states which Data Link Connec- tion Management scheme is active (and by impli- cation, what DLCI it uses) on the Frame Relay interface.

INT frDlcmiAddress

1.3.6.1.2.1.10.32.1.1.3

INTEGER

read-write

This variable states which address format is in use on the Frame Relay interface.

INT frDlcmiAddressLen

1.3.6.1.2.1.10.32.1.1.4

INTEGER

read-write

This variable states which address length in octets. In the case of Q922 format, the length indicates the entire length of the address in- cluding the control portion.

INT frDlcmiPollingInterval

1.3.6.1.2.1.10.32.1.1.5

INTEGER

read-write

This is the number of seconds between succes- sive status enquiry messages.

INT frDlcmiFullEnquiryInterval

1.3.6.1.2.1.10.32.1.1.6

INTEGER

read-write

Number of status enquiry intervals that pass before issuance of a full status enquiry mes- sage.

INT frDlcmiErrorThreshold

1.3.6.1.2.1.10.32.1.1.7

INTEGER

read-write

This is the maximum number of unanswered Status Enquiries the equipment shall accept be- fore declaring the interface down.

INT frDlcmiMonitoredEvents

1.3.6.1.2.1.10.32.1.1.8

INTEGER

read-write

This is the number of status polling intervals over which the error threshold is counted. For example, if within 'MonitoredEvents' number of events the station receives 'ErrorThreshold' number of errors, the interface is marked as down.

INT frDlcmiMaxSupportedVCs

1.3.6.1.2.1.10.32.1.1.9

INTEGER

read-write

The maximum number of Virtual Circuits allowed for this interface. Usually dictated by the Frame Relay network. In response to a SET, if a value less than zero or higher than the agent's maximal capability is configured, the agent should respond bad- Value

INT frDlcmiMulticast

1.3.6.1.2.1.10.32.1.1.10

INTEGER

read-write

This indicates whether the Frame Relay inter- face is using a multicast service.

frCircuitTable

1.3.6.1.2.1.10.32.2

not-accessible

A table containing information about specific Data Link Connection Identifiers and corresponding virtual circuits.

frCircuitEntry

1.3.6.1.2.1.10.32.2.1

not-accessible

The information regarding a single Data Link Connection Identifier.

IND frCircuitIfIndex

1.3.6.1.2.1.10.32.2.1.1

Index

read-only

The ifIndex Value of the ifEntry this virtual circuit is layered onto.

DLC frCircuitDlci

1.3.6.1.2.1.10.32.2.1.2

DLCI

read-only

The Data Link Connection Identifier for this virtual circuit.

INT frCircuitState

1.3.6.1.2.1.10.32.2.1.3

INTEGER

read-write

Indicates whether the particular virtual cir- cuit is operational. In the absence of a Data Link Connection Management Interface, virtual circuit entries (rows) may be created by set- ting virtual circuit state to 'active', or deleted by changing Circuit state to 'invalid'. Whether or not the row actually disappears is left to the implementation, so this object may actually read as 'invalid' for some arbitrary length of time. It is also legal to set the state of a virtual circuit to 'inactive' to temporarily disable a given circuit.

CTR frCircuitReceivedFECNs

1.3.6.1.2.1.10.32.2.1.4

Counter

read-only

Number of frames received from the network in- dicating forward congestion since the virtual circuit was created.

CTR frCircuitReceivedBECNs

1.3.6.1.2.1.10.32.2.1.5

Counter

read-only

Number of frames received from the network in- dicating backward congestion since the virtual circuit was created.

CTR frCircuitSentFrames

1.3.6.1.2.1.10.32.2.1.6

Counter

read-only

The number of frames sent from this virtual circuit since it was created.

CTR frCircuitSentOctets

1.3.6.1.2.1.10.32.2.1.7

Counter

read-only

The number of octets sent from this virtual circuit since it was created.

CTR frCircuitReceivedFrames

1.3.6.1.2.1.10.32.2.1.8

Counter

read-only

Number of frames received over this virtual circuit since it was created.

CTR frCircuitReceivedOctets

1.3.6.1.2.1.10.32.2.1.9

Counter

read-only

Number of octets received over this virtual circuit since it was created.

TIK frCircuitCreationTime

1.3.6.1.2.1.10.32.2.1.10

TimeTicks

read-only

The value of sysUpTime when the virtual cir- cuit was created, whether by the Data Link Con- nection Management Interface or by a SetRe- quest.

TIK frCircuitLastTimeChange

1.3.6.1.2.1.10.32.2.1.11

TimeTicks

read-only

The value of sysUpTime when last there was a change in the virtual circuit state

INT frCircuitCommittedBurst

1.3.6.1.2.1.10.32.2.1.12

INTEGER

read-write

This variable indicates the maximum amount of data, in bits, that the network agrees to transfer under normal conditions, during the measurement interval.

INT frCircuitExcessBurst

1.3.6.1.2.1.10.32.2.1.13

INTEGER

read-write

This variable indicates the maximum amount of uncommitted data bits that the network will at- tempt to deliver over the measurement interval. By default, if not configured when creating the entry, the Excess Information Burst Size is set to the value of ifSpeed.

INT frCircuitThroughput

1.3.6.1.2.1.10.32.2.1.14

INTEGER

read-write

Throughput is the average number of 'Frame Re- lay Information Field' bits transferred per second across a user network interface in one direction, measured over the measurement inter- val. If the configured committed burst rate and throughput are both non-zero, the measurement interval T=frCircuitCommittedBurst/frCircuitThroughput. If the configured committed burst rate and throughput are both zero, the measurement in- terval T=frCircuitExcessBurst/ifSpeed.

frErrTable

1.3.6.1.2.1.10.32.3

not-accessible

A table containing information about Errors on the Frame Relay interface.

frErrEntry

1.3.6.1.2.1.10.32.3.1

not-accessible

The error information for a single frame relay interface.

IND frErrIfIndex

1.3.6.1.2.1.10.32.3.1.1

Index

read-only

The ifIndex Value of the corresponding ifEn- try.

INT frErrType

1.3.6.1.2.1.10.32.3.1.2

INTEGER

read-only

The type of error that was last seen on this interface.

OCT frErrData

1.3.6.1.2.1.10.32.3.1.3

OCTET STRING

read-only

An octet string containing as much of the er- ror packet as possible. As a minimum, it must contain the Q.922 Address or as much as was delivered. It is desirable to include all in- formation up to the PDU.

TIK frErrTime

1.3.6.1.2.1.10.32.3.1.4

TimeTicks

read-only

The value of sysUpTime at which the error was detected.

frame_relay_globals

1.3.6.1.2.1.10.32.4

INT frTrapState

1.3.6.1.2.1.10.32.4.1

INTEGER

read-write

This variable indicates whether the system produces the frDLCIStatusChange trap.

snmp

1.3.6.1.2.1.11

CTR snmpInPkts

1.3.6.1.2.1.11.1

Counter

read-only

The total number of Messages delivered to the SNMP entity from the transport service.

CTR snmpOutPkts

1.3.6.1.2.1.11.2

Counter

read-only

The total number of SNMP Messages which were passed from the SNMP protocol entity to the transport service.

CTR snmpInBadVersions

1.3.6.1.2.1.11.3

Counter

read-only

The total number of SNMP Messages which were delivered to the SNMP protocol entity and were for an unsupported SNMP version.

CTR snmpInBadCommunityNames

1.3.6.1.2.1.11.4

Counter

read-only

The total number of SNMP Messages delivered to the SNMP protocol entity which used a SNMP community name not known to said entity.

CTR snmpInBadCommunityUses

1.3.6.1.2.1.11.5

Counter

read-only

The total number of SNMP Messages delivered to the SNMP protocol entity which represented an SNMP operation which was not allowed by the SNMP community named in the Message.

CTR snmpInASNParseErrs

1.3.6.1.2.1.11.6

Counter

read-only

The total number of ASN.1 or BER errors encountered by the SNMP protocol entity when decoding received SNMP Messages.

CTR snmpInTooBigs

1.3.6.1.2.1.11.8

Counter

read-only

The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `tooBig'.

CTR snmpInNoSuchNames

1.3.6.1.2.1.11.9

Counter

read-only

The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `noSuchName'.

CTR snmpInBadValues

1.3.6.1.2.1.11.10

Counter

read-only

The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `badValue'.

CTR snmpInReadOnlys

1.3.6.1.2.1.11.11

Counter

read-only

The total number valid SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `readOnly'. It should be noted that it is a protocol error to generate an SNMP PDU which contains the value `readOnly' in the error-status field, as such this object is provided as a means of detecting incorrect implementations of the SNMP.

CTR snmpInGenErrs

1.3.6.1.2.1.11.12

Counter

read-only

The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `genErr'.

CTR snmpInTotalReqVars

1.3.6.1.2.1.11.13

Counter

read-only

The total number of MIB objects which have been retrieved successfully by the SNMP protocol entity as the result of receiving valid SNMP Get-Request and Get-Next PDUs.

CTR snmpInTotalSetVars

1.3.6.1.2.1.11.14

Counter

read-only

The total number of MIB objects which have been altered successfully by the SNMP protocol entity as the result of receiving valid SNMP Set-Request PDUs.

CTR snmpInGetRequests

1.3.6.1.2.1.11.15

Counter

read-only

The total number of SNMP Get-Request PDUs which have been accepted and processed by the SNMP protocol entity.

CTR snmpInGetNexts

1.3.6.1.2.1.11.16

Counter

read-only

The total number of SNMP Get-Next PDUs which have been accepted and processed by the SNMP protocol entity.

CTR snmpInSetRequests

1.3.6.1.2.1.11.17

Counter

read-only

The total number of SNMP Set-Request PDUs which have been accepted and processed by the SNMP protocol entity.

CTR snmpInGetResponses

1.3.6.1.2.1.11.18

Counter

read-only

The total number of SNMP Get-Response PDUs which have been accepted and processed by the SNMP protocol entity.

CTR snmpInTraps

1.3.6.1.2.1.11.19

Counter

read-only

The total number of SNMP Trap PDUs which have been accepted and processed by the SNMP protocol entity.

CTR snmpOutTooBigs

1.3.6.1.2.1.11.20

Counter

read-only

The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `tooBig.'

CTR snmpOutNoSuchNames

1.3.6.1.2.1.11.21

Counter

read-only

The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status is `noSuchName'.

CTR snmpOutBadValues

1.3.6.1.2.1.11.22

Counter

read-only

The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `badValue'.

CTR snmpOutGenErrs

1.3.6.1.2.1.11.24

Counter

read-only

The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `genErr'.

CTR snmpOutGetRequests

1.3.6.1.2.1.11.25

Counter

read-only

The total number of SNMP Get-Request PDUs which have been generated by the SNMP protocol entity.

CTR snmpOutGetNexts

1.3.6.1.2.1.11.26

Counter

read-only

The total number of SNMP Get-Next PDUs which have been generated by the SNMP protocol entity.

CTR snmpOutSetRequests

1.3.6.1.2.1.11.27

Counter

read-only

The total number of SNMP Set-Request PDUs which have been generated by the SNMP protocol entity.

CTR snmpOutGetResponses

1.3.6.1.2.1.11.28

Counter

read-only

The total number of SNMP Get-Response PDUs which have been generated by the SNMP protocol entity.

CTR snmpOutTraps

1.3.6.1.2.1.11.29

Counter

read-only

The total number of SNMP Trap PDUs which have been generated by the SNMP protocol entity.

INT snmpEnableAuthenTraps

1.3.6.1.2.1.11.30

INTEGER

read-write

Indicates whether the SNMP agent process is permitted to generate authentication-failure traps. The value of this object overrides any configuration information; as such, it provides a means whereby all authentication-failure traps may be disabled. Note that it is strongly recommended that this object be stored in non-volatile memory so that it remains constant between re-initializations of the network management system.

1.3.6.1.2.1.13

1.3.6.1.2.1.13.1

1.3.6.1.2.1.13.2

1.3.6.1.2.1.13.3

ddp

1.3.6.1.2.1.13.4

rtmp

1.3.6.1.2.1.13.5

kip

1.3.6.1.2.1.13.6

zip

1.3.6.1.2.1.13.7

nbp

1.3.6.1.2.1.13.8

1.3.6.1.2.1.13.9

1.3.6.1.2.1.14

1.3.6.1.2.1.14.1

1.3.6.1.2.1.16

NTF risingAlarm

1.3.6.1.2.1.16.0.1

The SNMP trap that is generated when an alarm entry crosses its rising threshold and generates an event that is configured for sending SNMP traps.

NTF fallingAlarm

1.3.6.1.2.1.16.0.2

The SNMP trap that is generated when an alarm entry crosses its falling threshold and generates an event that is configured for sending SNMP traps.

statistics

1.3.6.1.2.1.16.1

etherStatsTable

1.3.6.1.2.1.16.1.1

not-accessible

A list of Ethernet statistics entries.

etherStatsEntry

1.3.6.1.2.1.16.1.1.1

not-accessible

A collection of statistics kept for a particular Ethernet interface.

INT etherStatsIndex

1.3.6.1.2.1.16.1.1.1.1

INTEGER

read-only

The value of this object uniquely identifies this etherStats entry.

OID etherStatsDataSource

1.3.6.1.2.1.16.1.1.1.2

OBJECT IDENTIFIER

read-write

This object identifies the source of the data that this etherStats entry is configured to analyze. This source can be any ethernet interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in [4,6], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all packets on the local network segment attached to the identified interface. This object may not be modified if the associated etherStatsStatus object is equal to valid(1).

CTR etherStatsDropEvents

1.3.6.1.2.1.16.1.1.1.3

Counter

read-only

The total number of events in which packets were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of packets dropped; it is just the number of times this condition has been detected.

CTR etherStatsOctets

1.3.6.1.2.1.16.1.1.1.4

Counter

read-only

The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).

CTR etherStatsPkts

1.3.6.1.2.1.16.1.1.1.5

Counter

read-only

The total number of packets (including error packets) received.

CTR etherStatsBroadcastPkts

1.3.6.1.2.1.16.1.1.1.6

Counter

read-only

The total number of good packets received that were directed to the broadcast address.

CTR etherStatsMulticastPkts

1.3.6.1.2.1.16.1.1.1.7

Counter

read-only

The total number of good packets received that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address.

CTR etherStatsCRCAlignErrors

1.3.6.1.2.1.16.1.1.1.8

Counter

read-only

The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but were not an integral number of octets in length or had a bad Frame Check Sequence (FCS).

CTR etherStatsUndersizePkts

1.3.6.1.2.1.16.1.1.1.9

Counter

read-only

The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.

CTR etherStatsOversizePkts

1.3.6.1.2.1.16.1.1.1.10

Counter

read-only

The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.

CTR etherStatsFragments

1.3.6.1.2.1.16.1.1.1.11

Counter

read-only

The total number of packets received that were not an integral number of octets in length or that had a bad Frame Check Sequence (FCS), and were less than 64 octets in length (excluding framing bits but including FCS octets).

CTR etherStatsJabbers

1.3.6.1.2.1.16.1.1.1.12

Counter

read-only

The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and were not an integral number of octets in length or had a bad Frame Check Sequence (FCS).

CTR etherStatsCollisions

1.3.6.1.2.1.16.1.1.1.13

Counter

read-only

The best estimate of the total number of collisions on this Ethernet segment.

CTR etherStatsPkts64Octets

1.3.6.1.2.1.16.1.1.1.14

Counter

read-only

The total number of packets (including error packets) received that were 64 octets in length (excluding framing bits but including FCS octets).

CTR etherStatsPkts65to127Octets

1.3.6.1.2.1.16.1.1.1.15

Counter

read-only

The total number of packets (including error packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).

CTR etherStatsPkts128to255Octets

1.3.6.1.2.1.16.1.1.1.16

Counter

read-only

The total number of packets (including error packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).

CTR etherStatsPkts256to511Octets

1.3.6.1.2.1.16.1.1.1.17

Counter

read-only

The total number of packets (including error packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).

CTR etherStatsPkts512to1023Octets

1.3.6.1.2.1.16.1.1.1.18

Counter

read-only

The total number of packets (including error packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).

CTR etherStatsPkts1024to1518Octets

1.3.6.1.2.1.16.1.1.1.19

Counter

read-only

The total number of packets (including error packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).

STR etherStatsOwner

1.3.6.1.2.1.16.1.1.1.20

OwnerString

read-write

The entity that configured this entry and is therefore using the resources assigned to it.

ENT etherStatsStatus

1.3.6.1.2.1.16.1.1.1.21

EntryStatus

read-write

The status of this etherStats entry.

history

1.3.6.1.2.1.16.2

alarm

1.3.6.1.2.1.16.3

alarmTable

1.3.6.1.2.1.16.3.1

not-accessible

A list of alarm entries.

alarmEntry

1.3.6.1.2.1.16.3.1.1

not-accessible

A list of parameters that set up a periodic checking for alarm conditions.

INT alarmIndex

1.3.6.1.2.1.16.3.1.1.1

INTEGER

read-only

An index that uniquely identifies an entry in the alarm table. Each such entry defines a diagnostic sample at a particular interval for an object on the device.

INT alarmInterval

1.3.6.1.2.1.16.3.1.1.2

INTEGER

read-write

The interval in seconds over which the data is sampled and compared with the rising and falling thresholds. When setting this variable, care should be given to ensure that the variable being monitored will not exceed 2^31 - 1 and roll over the alarmValue object during the interval. This object may not be modified if the associated alarmStatus object is equal to valid(1).

OID alarmVariable

1.3.6.1.2.1.16.3.1.1.3

OBJECT IDENTIFIER

read-write

The object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1 primitive type of INTEGER (INTEGER, Counter, Gauge, or TimeTicks) may be sampled. Because SNMP access control is articulated entirely in terms of the contents of MIB views, no access control mechanism exists that can restrict the value of this object to identify only those objects that exist in a particular MIB view. Because there is thus no acceptable means of restricting the read access that could be obtained through the alarm mechanism, the probe must only grant write access to this object in those views that have read access to all objects on the probe. During a set operation, if the supplied variable name is not available in the selected MIB view, a badValue error must be returned. If at any time the variable name of an established alarmEntry is no longer available in the selected MIB view, the probe must change the status of this alarmEntry to invalid(4). This object may not be modified if the associated alarmStatus object is equal to valid(1).

INT alarmSampleType

1.3.6.1.2.1.16.3.1.1.4

INTEGER

read-write

The method of sampling the selected variable and calculating the value to be compared against the thresholds. If the value of this object is absoluteValue(1), the value of the selected variable will be compared directly with the thresholds at the end of the sampling interval. If the value of this object is deltaValue(2), the value of the selected variable at the last sample will be subtracted from the current value, and the difference compared with the thresholds. This object may not be modified if the associated alarmStatus object is equal to valid(1).

INT alarmValue

1.3.6.1.2.1.16.3.1.1.5

INTEGER

read-only

The value of the statistic during the last sampling period. The value during the current sampling period is not made available until the period is completed.

INT alarmStartupAlarm

1.3.6.1.2.1.16.3.1.1.6

INTEGER

read-write

The alarm that may be sent when this entry is first set to valid. If the first sample after this entry becomes valid is greater than or equal to the risingThreshold and alarmStartupAlarm is equal to risingAlarm(1) or risingOrFallingAlarm(3), then a single rising alarm will be generated. If the first sample after this entry becomes valid is less than or equal to the fallingThreshold and alarmStartupAlarm is equal to fallingAlarm(2) or risingOrFallingAlarm(3), then a single falling alarm will be generated. This object may not be modified if the associated alarmStatus object is equal to valid(1).

INT alarmRisingThreshold

1.3.6.1.2.1.16.3.1.1.7

INTEGER

read-write

A threshold for the sampled statistic. When the current sampled value is greater than or equal to this threshold, and the value at the last sampling interval was less than this threshold, a single event will be generated. A single event will also be generated if the first sample after this entry becomes valid is greater than or equal to this threshold and the associated alarmStartupAlarm is equal to risingAlarm(1) or risingOrFallingAlarm(3). After a rising event is generated, another such event will not be generated until the sampled value falls below this threshold and reaches the alarmFallingThreshold. This object may not be modified if the associated alarmStatus object is equal to valid(1).

INT alarmFallingThreshold

1.3.6.1.2.1.16.3.1.1.8

INTEGER

read-write

A threshold for the sampled statistic. When the current sampled value is less than or equal to this threshold, and the value at the last sampling interval was greater than this threshold, a single event will be generated. A single event will also be generated if the first sample after this entry becomes valid is less than or equal to this threshold and the associated alarmStartupAlarm is equal to fallingAlarm(2) or risingOrFallingAlarm(3). After a falling event is generated, another such event will not be generated until the sampled value rises above this threshold and reaches the alarmRisingThreshold. This object may not be modified if the associated alarmStatus object is equal to valid(1).

INT alarmRisingEventIndex

1.3.6.1.2.1.16.3.1.1.9

INTEGER

read-write

The index of the eventEntry that is used when a rising threshold is crossed. The eventEntry identified by a particular value of this index is the same as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In particular, if this value is zero, no associated event will be generated, as zero is not a valid event index. This object may not be modified if the associated alarmStatus object is equal to valid(1).

INT alarmFallingEventIndex

1.3.6.1.2.1.16.3.1.1.10

INTEGER

read-write

The index of the eventEntry that is used when a falling threshold is crossed. The eventEntry identified by a particular value of this index is the same as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In particular, if this value is zero, no associated event will be generated, as zero is not a valid event index. This object may not be modified if the associated alarmStatus object is equal to valid(1).

STR alarmOwner

1.3.6.1.2.1.16.3.1.1.11

OwnerString

read-write

The entity that configured this entry and is therefore using the resources assigned to it.

ENT alarmStatus

1.3.6.1.2.1.16.3.1.1.12

EntryStatus

read-write

The status of this alarm entry.

1.3.6.1.2.1.16.4

1.3.6.1.2.1.16.5

1.3.6.1.2.1.16.6

1.3.6.1.2.1.16.7

1.3.6.1.2.1.16.8

1.3.6.1.2.1.16.9

1.3.6.1.2.1.16.9.1

not-accessible

A list of events to be generated.

eventEntry

1.3.6.1.2.1.16.9.1.1

not-accessible

A set of parameters that describe an event to be generated when certain conditions are met.

INT eventIndex

1.3.6.1.2.1.16.9.1.1.1

INTEGER

read-only

An index that uniquely identifies an entry in the event table. Each such entry defines one event that is to be generated when the appropriate conditions occur.

STR eventDescription

1.3.6.1.2.1.16.9.1.1.2

DisplayString

read-write

A comment describing this event entry.

INT eventType

1.3.6.1.2.1.16.9.1.1.3

INTEGER

read-write

The type of notification that the probe will make about this event. In the case of log, an entry is made in the log table for each event. In the case of snmp-trap, an SNMP trap is sent to one or more management stations.

OCT eventCommunity

1.3.6.1.2.1.16.9.1.1.4

OCTET STRING

read-write

If an SNMP trap is to be sent, it will be sent to the SNMP community specified by this octet string. In the future this table will be extended to include the party security mechanism. This object shall be set to a string of length zero if it is intended that that mechanism be used to specify the destination of the trap.

TIK eventLastTimeSent

1.3.6.1.2.1.16.9.1.1.5

TimeTicks

read-only

The value of sysUpTime at the time this event entry last generated an event. If this entry has not generated any events, this value will be zero.

STR eventOwner

1.3.6.1.2.1.16.9.1.1.6

OwnerString

read-write

The entity that configured this entry and is therefore using the resources assigned to it. If this object contains a string starting with 'monitor' and has associated entries in the log table, all connected management stations should retrieve those log entries, as they may have significance to all management stations connected to this device

ENT eventStatus

1.3.6.1.2.1.16.9.1.1.7

EntryStatus

read-write

The status of this event entry. If this object is not equal to valid(1), all associated log entries shall be deleted by the agent.

logTable

1.3.6.1.2.1.16.9.2

not-accessible

A list of events that have been logged.

logEntry

1.3.6.1.2.1.16.9.2.1

not-accessible

A set of data describing an event that has been logged.

INT logEventIndex

1.3.6.1.2.1.16.9.2.1.1

INTEGER

read-only

The event entry that generated this log entry. The log identified by a particular value of this index is associated with the same eventEntry as identified by the same value of eventIndex.

INT logIndex

1.3.6.1.2.1.16.9.2.1.2

INTEGER

read-only

An index that uniquely identifies an entry in the log table amongst those generated by the same eventEntries. These indexes are assigned beginning with 1 and increase by one with each new log entry. The association between values of logIndex and logEntries is fixed for the lifetime of each logEntry. The agent may choose to delete the oldest instances of logEntry as required because of lack of memory. It is an implementation-specific matter as to when this deletion may occur.

TIK logTime

1.3.6.1.2.1.16.9.2.1.3

TimeTicks

read-only

The value of sysUpTime when this log entry was created.

STR logDescription

1.3.6.1.2.1.16.9.2.1.4

DisplayString

read-only

An implementation dependent description of the event that activated this log entry.

dot1dBridge

1.3.6.1.2.1.17

NTF newRoot

1.3.6.1.2.1.17.0.1

The newRoot trap indicates that the sending agent has become the new root of the Spanning Tree; the trap is sent by a bridge soon after its election as the new root, e.g., upon expiration of the Topology Change Timer immediately subsequent to its election. Implementation of this trap is optional.

NTF topologyChange

1.3.6.1.2.1.17.0.2

A topologyChange trap is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. The trap is not sent if a newRoot trap is sent for the same transition. Implementation of this trap is optional.

dot1dBase

1.3.6.1.2.1.17.1

MAC dot1dBaseBridgeAddress

1.3.6.1.2.1.17.1.1

MacAddress

read-only

The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However it is only required to be unique. When concatenated with dot1dStpPriority a unique BridgeIdentifier is formed which is used in the Spanning Tree Protocol.

INT dot1dBaseNumPorts

1.3.6.1.2.1.17.1.2

INTEGER

read-only

The number of ports controlled by this bridging entity.

INT dot1dBaseType

1.3.6.1.2.1.17.1.3

INTEGER

read-only

Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging this will be indicated by entries in the port table for the given type.

dot1dBasePortTable

1.3.6.1.2.1.17.1.4

not-accessible

A table that contains generic information about every port that is associated with this bridge. Transparent, source-route, and srt ports are included.

dot1dBasePortEntry

1.3.6.1.2.1.17.1.4.1

not-accessible

A list of information for each port of the bridge.

INT dot1dBasePort

1.3.6.1.2.1.17.1.4.1.1

INTEGER

read-only

The port number of the port for which this entry contains bridge management information.

INT dot1dBasePortIfIndex

1.3.6.1.2.1.17.1.4.1.2

INTEGER

read-only

The value of the instance of the ifIndex object, defined in MIB-II, for the interface corresponding to this port.

OID dot1dBasePortCircuit

1.3.6.1.2.1.17.1.4.1.3

OBJECT IDENTIFIER

read-only

For a port which (potentially) has the same value of dot1dBasePortIfIndex as another port on the same bridge, this object contains the name of an object instance unique to this port. For example, in the case where multiple ports correspond one- to-one with multiple X.25 virtual circuits, this value might identify an (e.g., the first) object instance associated with the X.25 virtual circuit corresponding to this port. For a port which has a unique value of dot1dBasePortIfIndex, this object can have the value { 0 0 }.

CTR dot1dBasePortDelayExceededDiscards

1.3.6.1.2.1.17.1.4.1.4

Counter

read-only

The number of frames discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges.

CTR dot1dBasePortMtuExceededDiscards

1.3.6.1.2.1.17.1.4.1.5

Counter

read-only

The number of frames discarded by this port due to an excessive size. It is incremented by both transparent and source route bridges.

dot1dStp

1.3.6.1.2.1.17.2

INT dot1dStpProtocolSpecification

1.3.6.1.2.1.17.2.1

INTEGER

read-only

An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementations will return 'ieee8021d(3)'. If future versions of the IEEE Spanning Tree Protocol are released that are incompatible with the current version a new value will be defined.

INT dot1dStpPriority

1.3.6.1.2.1.17.2.2

INTEGER

read-write

The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of dot1dBaseBridgeAddress.

TIK dot1dStpTimeSinceTopologyChange

1.3.6.1.2.1.17.2.3

TimeTicks

read-only

The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.

CTR dot1dStpTopChanges

1.3.6.1.2.1.17.2.4

Counter

read-only

The total number of topology changes detected by this bridge since the management entity was last reset or initialized.

BRI dot1dStpDesignatedRoot

1.3.6.1.2.1.17.2.5

BridgeId

read-only

The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.

INT dot1dStpRootCost

1.3.6.1.2.1.17.2.6

INTEGER

read-only

The cost of the path to the root as seen from this bridge.

INT dot1dStpRootPort

1.3.6.1.2.1.17.2.7

INTEGER

read-only

The port number of the port which offers the lowest cost path from this bridge to the root bridge.

TIM dot1dStpMaxAge

1.3.6.1.2.1.17.2.8

Timeout

read-only

The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.

TIM dot1dStpHelloTime

1.3.6.1.2.1.17.2.9

Timeout

read-only

The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.

INT dot1dStpHoldTime

1.3.6.1.2.1.17.2.10

INTEGER

read-only

This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.

TIM dot1dStpForwardDelay

1.3.6.1.2.1.17.2.11

Timeout

read-only

This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to dot1dStpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.]

TIM dot1dStpBridgeMaxAge

1.3.6.1.2.1.17.2.12

Timeout

read-write

The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.

TIM dot1dStpBridgeHelloTime

1.3.6.1.2.1.17.2.13

Timeout

read-write

The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.

TIM dot1dStpBridgeForwardDelay

1.3.6.1.2.1.17.2.14

Timeout

read-write

The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.

dot1dStpPortTable

1.3.6.1.2.1.17.2.15

not-accessible

A table that contains port-specific information for the Spanning Tree Protocol.

dot1dStpPortEntry

1.3.6.1.2.1.17.2.15.1

not-accessible

A list of information maintained by every port about the Spanning Tree Protocol state for that port.

INT dot1dStpPort

1.3.6.1.2.1.17.2.15.1.1

INTEGER

read-only

The port number of the port for which this entry contains Spanning Tree Protocol management information.

INT dot1dStpPortPriority

1.3.6.1.2.1.17.2.15.1.2

INTEGER

read-write

The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of dot1dStpPort.

INT dot1dStpPortState

1.3.6.1.2.1.17.2.15.1.3

INTEGER

read-only

The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see dot1dStpPortEnable), this object will have a value of disabled(1).

INT dot1dStpPortEnable

1.3.6.1.2.1.17.2.15.1.4

INTEGER

read-write

The enabled/disabled status of the port.

INT dot1dStpPortPathCost

1.3.6.1.2.1.17.2.15.1.5

INTEGER

read-write

The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN.

BRI dot1dStpPortDesignatedRoot

1.3.6.1.2.1.17.2.15.1.6

BridgeId

read-only

The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.

INT dot1dStpPortDesignatedCost

1.3.6.1.2.1.17.2.15.1.7

INTEGER

read-only

The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.

BRI dot1dStpPortDesignatedBridge

1.3.6.1.2.1.17.2.15.1.8

BridgeId

read-only

The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.

OCT dot1dStpPortDesignatedPort

1.3.6.1.2.1.17.2.15.1.9

OCTET STRING

read-only

The Port Identifier of the port on the Designated Bridge for this port's segment.

CTR dot1dStpPortForwardTransitions

1.3.6.1.2.1.17.2.15.1.10

Counter

read-only

The number of times this port has transitioned from the Learning state to the Forwarding state.

dot1dSr

1.3.6.1.2.1.17.3

dot1dTp

1.3.6.1.2.1.17.4

CTR dot1dTpLearnedEntryDiscards

1.3.6.1.2.1.17.4.1

Counter

read-only

The total number of Forwarding Database entries, which have been or would have been learnt, but have been discarded due to a lack of space to store them in the Forwarding Database. If this counter is increasing, it indicates that the Forwarding Database is regularly becoming full (a condition which has unpleasant performance effects on the subnetwork). If this counter has a significant value but is not presently increasing, it indicates that the problem has been occurring but is not persistent.

INT dot1dTpAgingTime

1.3.6.1.2.1.17.4.2

INTEGER

read-write

The timeout period in seconds for aging out dynamically learned forwarding information. 802.1D-1990 recommends a default of 300 seconds.

dot1dTpFdbTable

1.3.6.1.2.1.17.4.3

not-accessible

A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame.

dot1dTpFdbEntry

1.3.6.1.2.1.17.4.3.1

not-accessible

Information about a specific unicast MAC address for which the bridge has some forwarding and/or filtering information.

MAC dot1dTpFdbAddress

1.3.6.1.2.1.17.4.3.1.1

MacAddress

read-only

A unicast MAC address for which the bridge has forwarding and/or filtering information.

INT dot1dTpFdbPort

1.3.6.1.2.1.17.4.3.1.2

INTEGER

read-only

Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of dot1dTpFdbAddress has been seen. A value of '0' indicates that the port number has not been learned but that the bridge does have some forwarding/filtering information about this address (e.g. in the dot1dStaticTable). Implementors are encouraged to assign the port value to this object whenever it is learned even for addresses for which the corresponding value of dot1dTpFdbStatus is not learned(3).

INT dot1dTpFdbStatus

1.3.6.1.2.1.17.4.3.1.3

INTEGER

read-only

The status of this entry. The meanings of the values are: other(1) : none of the following. This would include the case where some other MIB object (not the corresponding instance of dot1dTpFdbPort, nor an entry in the dot1dStaticTable) is being used to determine if and how frames addressed to the value of the corresponding instance of dot1dTpFdbAddress are being forwarded. invalid(2) : this entry is not longer valid (e.g., it was learned but has since aged-out), but has not yet been flushed from the table. learned(3) : the value of the corresponding instance of dot1dTpFdbPort was learned, and is being used. self(4) : the value of the corresponding instance of dot1dTpFdbAddress represents one of the bridge's addresses. The corresponding instance of dot1dTpFdbPort indicates which of the bridge's ports has this address. mgmt(5) : the value of the corresponding instance of dot1dTpFdbAddress is also the value of an existing instance of dot1dStaticAddress.

dot1dTpPortTable

1.3.6.1.2.1.17.4.4

not-accessible

A table that contains information about every port that is associated with this transparent bridge.

dot1dTpPortEntry

1.3.6.1.2.1.17.4.4.1

not-accessible

A list of information for each port of a transparent bridge.

INT dot1dTpPort

1.3.6.1.2.1.17.4.4.1.1

INTEGER

read-only

The port number of the port for which this entry contains Transparent bridging management information.

INT dot1dTpPortMaxInfo

1.3.6.1.2.1.17.4.4.1.2

INTEGER

read-only

The maximum size of the INFO (non-MAC) field that this port will receive or transmit.

CTR dot1dTpPortInFrames

1.3.6.1.2.1.17.4.4.1.3

Counter

read-only

The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames.

CTR dot1dTpPortOutFrames

1.3.6.1.2.1.17.4.4.1.4

Counter

read-only

The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames.

CTR dot1dTpPortInDiscards

1.3.6.1.2.1.17.4.4.1.5

Counter

read-only

Count of valid frames received which were discarded (i.e., filtered) by the Forwarding Process.

dot1dStatic

1.3.6.1.2.1.17.5

dot1dStaticTable

1.3.6.1.2.1.17.5.1

not-accessible

A table containing filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific destination addresses are allowed to be forwarded. The value of zero in this table as the port number from which frames with a specific destination address are received, is used to specify all ports for which there is no specific entry in this table for that particular destination address. Entries are valid for unicast and for group/broadcast addresses.

dot1dStaticEntry

1.3.6.1.2.1.17.5.1.1

not-accessible

Filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from a specific port and containing a specific destination address are allowed to be forwarded.

MAC dot1dStaticAddress

1.3.6.1.2.1.17.5.1.1.1

MacAddress

read-write

The destination MAC address in a frame to which this entry's filtering information applies. This object can take the value of a unicast address, a group address or the broadcast address.

INT dot1dStaticReceivePort

1.3.6.1.2.1.17.5.1.1.2

INTEGER

read-write

Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the bridge for which there is no other applicable entry.

OCT dot1dStaticAllowedToGoTo

1.3.6.1.2.1.17.5.1.1.3

OCTET STRING

read-write

The set of ports to which frames received from a specific port and destined for a specific MAC address, are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) The default value of this object is a string of ones of appropriate length.

INT dot1dStaticStatus

1.3.6.1.2.1.17.5.1.1.4

INTEGER

read-write

This object indicates the status of this entry. The default value is permanent(3). other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object removes the corresponding entry. permanent(3) - this entry is currently in use and will remain so after the next reset of the bridge. deleteOnReset(4) - this entry is currently in use and will remain so until the next reset of the bridge. deleteOnTimeout(5) - this entry is currently in use and will remain so until it is aged out.

1.3.6.1.2.1.18

1.3.6.1.2.1.18.1

1.3.6.1.2.1.18.2

1.3.6.1.2.1.18.3

end

1.3.6.1.2.1.18.4

routing

1.3.6.1.2.1.18.5

circuit

1.3.6.1.2.1.18.6

phivCircuitParametersTable

1.3.6.1.2.1.18.6.1

not-accessible

Information about the parameters associated with all circuits currently known.

phivCircuitParametersEntry

1.3.6.1.2.1.18.6.1.1

not-accessible

Parameters information about all circuits currently known.

INT phivCircuitIndex

1.3.6.1.2.1.18.6.1.1.1

INTEGER

read-only

A unique index value for each known circuit.

INT phivCircuitLineIndex

1.3.6.1.2.1.18.6.1.1.2

INTEGER

read-only

The line on which this circuit is active. This is the same as the IfIndex.

INT phivCircuitCommonState

1.3.6.1.2.1.18.6.1.1.3

INTEGER

read-write

This value represents the circuit's Network Management operational state. NOTE: These values are incremented by one compared to the standard DECnet values in order to maintain compliance with RFC 1155.

INT phivCircuitCommonSubState

1.3.6.1.2.1.18.6.1.1.4

INTEGER

read-only

This value represents the circuit's Network Management operational and service substate. NOTE: These values are incremented by one compared to the standard DECnet values in order to maintain compliance with RFC 1155.

STR phivCircuitCommonName

1.3.6.1.2.1.18.6.1.1.5

DisplayString

read-only

The name of the circuit entry in the table, for example, SVA-0 or in a level 2 router ASYNC-8 or ETHER-1).

INT phivCircuitExecRecallTimer

1.3.6.1.2.1.18.6.1.1.6

INTEGER

read-write

This parameter represents the minimum number of seconds to wait before restarting the circuit. A value of 0 indicates not timer is running.

INT phivCircuitCommonType

1.3.6.1.2.1.18.6.1.1.7

INTEGER

read-only

Represents the type of the circuit. For X.25 circuits, the value must be set to X25. For DDCMP and Ethernet circuits it is read only and is the same value as the protocol of the associated line. NOTE: Values 1 - 5 are incremented by one compared to the standard DECnet values in order to maintain compliance with RFC 1155.

INT phivCircuitService

1.3.6.1.2.1.18.6.1.1.8

INTEGER

read-write

This value indicates whether or not Network Management allows service operations on a circuit. The values for service-control are as follows: ENABLED SERVICE state and/or service functions are allowed. DISABLED SERVICE state and/or service functions are not allowed. NOTE: These values are incremented by one compared to the standard DECnet values in order to maintain compliance with RFC 1155.

INT phivCircuitExecCost

1.3.6.1.2.1.18.6.1.1.9

INTEGER

read-write

This value represents the routing cost of the circuit. Routing sends messages along the path between two nodes having the smallest cost.

INT phivCircuitExecHelloTimer

1.3.6.1.2.1.18.6.1.1.10

INTEGER

read-write

This value determines the frequency of Routing Hello messages sent to the adjacent node on the circuit.

phivCircuitCountTable

1.3.6.1.2.1.18.6.2

not-accessible

Information about the counters associated with all circuits currently known.

phivCircuitCountEntry

1.3.6.1.2.1.18.6.2.1

not-accessible

Counter information about all circuits currently known

NUM phivCircuitCountSecLastZeroed

1.3.6.1.2.1.18.6.2.1.1

PhivCounter

read-only

Number of seconds since the circuit counters for this circuit were last zeroed.

NUM phivCircuitCountTermPacketsRecd

1.3.6.1.2.1.18.6.2.1.2

PhivCounter

read-only

Number of terminating packets received on this circuit.

NUM phivCircuitCountOriginPackSent

1.3.6.1.2.1.18.6.2.1.3

PhivCounter

read-only

Number of originating packets sent on this circuit.

NUM phivCircuitCountTermCongLoss

1.3.6.1.2.1.18.6.2.1.4

PhivCounter

read-only

Number of terminating congestion losses on this circuit.

NUM phivCircuitCountCorruptLoss

1.3.6.1.2.1.18.6.2.1.5

PhivCounter

read-only

Number of corruption losses on this circuit.

NUM phivCircuitCountTransitPksRecd

1.3.6.1.2.1.18.6.2.1.6

PhivCounter

read-only

Number of Transit packets received on this circuit.

NUM phivCircuitCountTransitPkSent

1.3.6.1.2.1.18.6.2.1.7

PhivCounter

read-only

Number of transit packets sent on this circuit.

NUM phivCircuitCountTransitCongestLoss

1.3.6.1.2.1.18.6.2.1.8

PhivCounter

read-only

Number of transit congestion losses on this circuit.

NUM phivCircuitCountCircuitDown

1.3.6.1.2.1.18.6.2.1.9

PhivCounter

read-only

Number of circuit downs on this circuit.

NUM phivCircuitCountInitFailure

1.3.6.1.2.1.18.6.2.1.10

PhivCounter

read-only

Number of Initialization failures on this circuit.

NUM phivCircuitCountAdjDown

1.3.6.1.2.1.18.6.2.1.11

PhivCounter

read-only

This counter indicates the number of adjacency losses that result from any of the following: Node listener timeout Invalid data received at node listener Unexpected control (initialization or verification) message received Routing message received with a checksum error Node identification from a routing message or a Hello message that is not the one expected Hello message received indicating that connectivity became one-way Adjacency idled.

NUM phivCircuitCountPeakAdj

1.3.6.1.2.1.18.6.2.1.12

PhivCounter

read-only

This counter indicates the maximum number of nodes that are up on the circuit.

NUM phivCircuitCountBytesRecd

1.3.6.1.2.1.18.6.2.1.13

PhivCounter

read-only

Number of bytes received on this circuit.

NUM phivCircuitCountBytesSent

1.3.6.1.2.1.18.6.2.1.14

PhivCounter

read-only

Number of bytes sent on this circuit.

NUM phivCircuitCountDataBlocksRecd

1.3.6.1.2.1.18.6.2.1.15

PhivCounter

read-only

Number of data blocks received on this circuit.

NUM phivCircuitCountDataBlocksSent

1.3.6.1.2.1.18.6.2.1.16

PhivCounter

read-only

Number of data blocks sent on this circuit.

NUM phivCircuitCountUsrBuffUnav

1.3.6.1.2.1.18.6.2.1.17

PhivCounter

read-only

Number of user buffer unavailable errors.

INT phivCircuitOrigQueueLimit

1.3.6.1.2.1.18.6.3

INTEGER

read-write

This parameter indicates the maximum number of originating packets that may be outstanding on this circuit. This does not include route-thru traffic.

INT phivCircuitCountZeroCount

1.3.6.1.2.1.18.6.4

INTEGER

read-write

When this value is set to 2, all of the counters in the Circuit Counter Table are set to zero.

1.3.6.1.2.1.18.7

1.3.6.1.2.1.18.8

1.3.6.1.2.1.18.9

1.3.6.1.2.1.18.10

1.3.6.1.2.1.18.11

1.3.6.1.2.1.18.12

1.3.6.1.2.1.18.14

1.3.6.1.2.1.18.15

1.3.6.1.2.1.19

INT charNumber

1.3.6.1.2.1.19.1

INTEGER

read-only

The number of entries in charPortTable, regardless of their current state.

charPortTable

1.3.6.1.2.1.19.2

not-accessible

A list of port entries. The number of entries is given by the value of charNumber.

charPortEntry

1.3.6.1.2.1.19.2.1

not-accessible

Status and parameter values for a character port.

INT charPortIndex

1.3.6.1.2.1.19.2.1.1

INTEGER

read-only

A unique value for each character port. Its value ranges between 1 and the value of charNumber. By convention and if possible, hardware port numbers come first, with a simple, direct mapping. The value for each port must remain constant at least from one re-initialization of the network management agent to the next.

STR charPortName

1.3.6.1.2.1.19.2.1.2

DisplayString

read-write

An administratively assigned name for the port, typically with some local significance.

INT charPortType

1.3.6.1.2.1.19.2.1.3

INTEGER

read-only

The port's type, 'physical' if the port represents an external hardware connector, 'virtual' if it does not.

OID charPortHardware

1.3.6.1.2.1.19.2.1.4

AutonomousType

read-only

A reference to hardware MIB definitions specific to a physical port's external connector. For example, if the connector is RS-232, then the value of this object refers to a MIB sub-tree defining objects specific to RS-232. If an agent is not configured to have such values, the agent returns the object identifier: nullHardware OBJECT IDENTIFIER ::= { 0 0 }

INT charPortReset

1.3.6.1.2.1.19.2.1.5

INTEGER

read-write

A control to force the port into a clean, initial state, both hardware and software, disconnecting all the port's existing sessions. In response to a get-request or get-next-request, the agent always returns 'ready' as the value. Setting the value to 'execute' causes a reset.

INT charPortAdminStatus

1.3.6.1.2.1.19.2.1.6

INTEGER

read-write

The port's desired state, independent of flow control. 'enabled' indicates that the port is allowed to pass characters and form new sessions. 'disabled' indicates that the port is allowed to pass characters but not form new sessions. 'off' indicates that the port is not allowed to pass characters or have any sessions. 'maintenance' indicates a maintenance mode, exclusive of normal operation, such as running a test.

INT charPortOperStatus

1.3.6.1.2.1.19.2.1.7

INTEGER

read-only

The port's actual, operational state, independent of flow control. 'up' indicates able to function normally. 'down' indicates inability to function for administrative or operational reasons. 'maintenance' indicates a maintenance mode, exclusive of normal operation, such as running a test. 'absent' indicates that port hardware is not present. 'active' indicates up with a user present (e.g. logged in).

TIK charPortLastChange

1.3.6.1.2.1.19.2.1.8

TimeTicks

read-only

The value of sysUpTime at the time the port entered its current operational state. If the current state was entered prior to the last reinitialization of the local network management subsystem, then this object contains a zero value.

INT charPortInFlowType

1.3.6.1.2.1.19.2.1.9

INTEGER

read-write

The port's type of input flow control. 'none' indicates no flow control at this level or below. 'xonXoff' indicates software flow control by recognizing XON and XOFF characters. 'hardware' indicates flow control delegated to the lower level, for example a parallel port. 'ctsRts' and 'dsrDtr' are specific to RS-232-like ports. Although not architecturally pure, they are included here for simplicity's sake.

INT charPortOutFlowType

1.3.6.1.2.1.19.2.1.10

INTEGER

read-write

The port's type of output flow control. 'none' indicates no flow control at this level or below. 'xonXoff' indicates software flow control by recognizing XON and XOFF characters. 'hardware' indicates flow control delegated to the lower level, for example a parallel port. 'ctsRts' and 'dsrDtr' are specific to RS-232-like ports. Although not architecturally pure, they are included here for simplicy's sake.

INT charPortInFlowState

1.3.6.1.2.1.19.2.1.11

INTEGER

read-only

The current operational state of input flow control on the port. 'none' indicates not applicable. 'unknown' indicates this level does not know. 'stop' indicates flow not allowed. 'go' indicates flow allowed.

INT charPortOutFlowState

1.3.6.1.2.1.19.2.1.12

INTEGER

read-only

The current operational state of output flow control on the port. 'none' indicates not applicable. 'unknown' indicates this level does not know. 'stop' indicates flow not allowed. 'go' indicates flow allowed.

CTR charPortInCharacters

1.3.6.1.2.1.19.2.1.13

Counter

read-only

Total number of characters detected as input from the port since system re-initialization and while the port operational state was 'up', 'active', or 'maintenance', including, for example, framing, flow control (i.e. XON and XOFF), each occurrence of a BREAK condition, locally-processed input, and input sent to all sessions.

CTR charPortOutCharacters

1.3.6.1.2.1.19.2.1.14

Counter

read-only

Total number of characters detected as output to the port since system re-initialization and while the port operational state was 'up', 'active', or 'maintenance', including, for example, framing, flow control (i.e. XON and XOFF), each occurrence of a BREAK condition, locally-created output, and output received from all sessions.

INT charPortAdminOrigin

1.3.6.1.2.1.19.2.1.15

INTEGER

read-write

The administratively allowed origin for establishing session on the port. 'dynamic' allows 'network' or 'local' session establishment. 'none' disallows session establishment.

INT charPortSessionMaximum

1.3.6.1.2.1.19.2.1.16

INTEGER

read-write

The maximum number of concurrent sessions allowed on the port. A value of -1 indicates no maximum. Setting the maximum to less than the current number of sessions has unspecified results.

GAU charPortSessionNumber

1.3.6.1.2.1.19.2.1.17

Gauge

read-only

The number of open sessions on the port that are in the connecting, connected, or disconnecting state.

INT charPortSessionIndex

1.3.6.1.2.1.19.2.1.18

INTEGER

read-only

The value of charSessIndex for the port's first or only active session. If the port has no active session, the agent returns the value zero.

charSessTable

1.3.6.1.2.1.19.3

not-accessible

A list of port session entries.

charSessEntry

1.3.6.1.2.1.19.3.1

not-accessible

Status and parameter values for a character port session.

INT charSessPortIndex

1.3.6.1.2.1.19.3.1.1

INTEGER

read-only

The value of charPortIndex for the port to which this session belongs.

INT charSessIndex

1.3.6.1.2.1.19.3.1.2

INTEGER

read-only

The session index in the context of the port, a non-zero positive integer. Session indexes within a port need not be sequential. Session indexes may be reused for different ports. For example, port 1 and port 3 may both have a session 2 at the same time. Session indexes may have any valid integer value, with any meaning convenient to the agent implementation.

INT charSessKill

1.3.6.1.2.1.19.3.1.3

INTEGER

read-write

A control to terminate the session. In response to a get-request or get-next-request, the agent always returns 'ready' as the value. Setting the value to 'execute' causes termination.

INT charSessState

1.3.6.1.2.1.19.3.1.4

INTEGER

read-only

The current operational state of the session, disregarding flow control. 'connected' indicates that character data could flow on the network side of session. 'connecting' indicates moving from nonexistent toward 'connected'. 'disconnecting' indicates moving from 'connected' or 'connecting' to nonexistent.

OID charSessProtocol

1.3.6.1.2.1.19.3.1.5

AutonomousType

read-only

The network protocol over which the session is running. Other OBJECT IDENTIFIER values may be defined elsewhere, in association with specific protocols. However, this document assigns those of known interest as of this writing.

INT charSessOperOrigin

1.3.6.1.2.1.19.3.1.6

INTEGER

read-only

The session's source of establishment.

CTR charSessInCharacters

1.3.6.1.2.1.19.3.1.7

Counter

read-only

This session's subset of charPortInCharacters.

CTR charSessOutCharacters

1.3.6.1.2.1.19.3.1.8

Counter

read-only

This session's subset of charPortOutCharacters.

NUM charSessConnectionId

1.3.6.1.2.1.19.3.1.9

InstancePointer

read-only

A reference to additional local MIB information. This should be the highest available related MIB, corresponding to charSessProtocol, such as Telnet. For example, the value for a TCP connection (in the absence of a Telnet MIB) is the object identifier of tcpConnState. If an agent is not configured to have such values, the agent returns the object identifier: nullConnectionId OBJECT IDENTIFIER ::= { 0 0 }

TIK charSessStartTime

1.3.6.1.2.1.19.3.1.10

TimeTicks

read-only

The value of sysUpTime in MIB-2 when the session entered connecting state.

1.3.6.1.2.1.19.4

1.3.6.1.2.1.19.4.1

1.3.6.1.2.1.19.4.2

1.3.6.1.2.1.19.4.3

1.3.6.1.2.1.19.4.4

1.3.6.1.2.1.19.4.5

1.3.6.1.2.1.19.4.6

1.3.6.1.2.1.22

NTF rptrHealth

1.3.6.1.2.1.22.0.1

The rptrHealth trap conveys information related to the operational status of the repeater. This trap is sent either when the value of rptrOperStatus changes, or upon completion of a non-disruptive test. The rptrHealth trap must contain the rptrOperStatus object. The agent may optionally include the rptrHealthText object in the varBind list. See the rptrOperStatus and rptrHealthText objects for descriptions of the information that is sent. The agent must throttle the generation of consecutive rptrHealth traps so that there is at least a five-second gap between traps of this type. When traps are throttled, they are dropped, not queued for sending at a future time. (Note that 'generating' a trap means sending to all configured recipients.)

NTF rptrGroupChange

1.3.6.1.2.1.22.0.2

This trap is sent when a change occurs in the group structure of a repeater. This occurs only when a group is logically or physically removed from or added to a repeater. The varBind list contains the identifier of the group that was removed or added. The agent must throttle the generation of consecutive rptrGroupChange traps for the same group so that there is at least a five-second gap between traps of this type. When traps are throttled, they are dropped, not queued for sending at a future time. (Note that 'generating' a trap means sending to all configured recipients.)

NTF rptrResetEvent

1.3.6.1.2.1.22.0.3

The rptrResetEvent trap conveys information related to the operational status of the repeater. This trap is sent on completion of a repeater reset action. A repeater reset action is defined as an a transition to the START state of Fig 9-2 in section 9 [IEEE 802.3 Std], when triggered by a management command (e.g., an SNMP Set on the rptrReset object). The agent must throttle the generation of consecutive rptrResetEvent traps so that there is at least a five-second gap between traps of this type. When traps are throttled, they are dropped, not queued for sending at a future time. (Note that 'generating' a trap means sending to all configured recipients.) The rptrResetEvent trap is not sent when the agent restarts and sends an SNMP coldStart or warmStart trap. However, it is recommended that a repeater agent send the rptrOperStatus object as an optional object with its coldStart and warmStart trap PDUs. The rptrOperStatus object must be included in the varbind list sent with this trap. The agent may optionally include the rptrHealthText object as well.

rptrBasicPackage

1.3.6.1.2.1.22.1

rptrRptrInfo

1.3.6.1.2.1.22.1.1

INT rptrGroupCapacity

1.3.6.1.2.1.22.1.1.1

INTEGER

read-only

The rptrGroupCapacity is the number of groups that can be contained within the repeater. Within each managed repeater, the groups are uniquely numbered in the range from 1 to rptrGroupCapacity. Some groups may not be present in the repeater, in which case the actual number of groups present will be less than rptrGroupCapacity. The number of groups present will never be greater than rptrGroupCapacity. Note: In practice, this will generally be the number of field-replaceable units (i.e., modules, cards, or boards) that can fit in the physical repeater enclosure, and the group numbers will correspond to numbers marked on the physical enclosure.

INT rptrOperStatus

1.3.6.1.2.1.22.1.1.2

INTEGER

read-only

The rptrOperStatus object indicates the operational state of the repeater. The rptrHealthText object may be consulted for more specific information about the state of the repeater's health. In the case of multiple kinds of failures (e.g., repeater failure and port failure), the value of this attribute shall reflect the highest priority failure in the following order, listed highest priority first: rptrFailure(3) groupFailure(4) portFailure(5) generalFailure(6).

STR rptrHealthText

1.3.6.1.2.1.22.1.1.3

DisplayString

read-only

The health text object is a text string that provides information relevant to the operational state of the repeater. Agents may use this string to provide detailed information on current failures, including how they were detected, and/or instructions for problem resolution. The contents are agent-specific.

INT rptrReset

1.3.6.1.2.1.22.1.1.4

INTEGER

read-write

Setting this object to reset(2) causes a transition to the START state of Fig 9-2 in section 9 [IEEE 802.3 Std]. Setting this object to noReset(1) has no effect. The agent will always return the value noReset(1) when this object is read. After receiving a request to set this variable to reset(2), the agent is allowed to delay the reset for a short period. For example, the implementor may choose to delay the reset long enough to allow the SNMP response to be transmitted. In any event, the SNMP response must be transmitted. This action does not reset the management counters defined in this document nor does it affect the portAdminStatus parameters. Included in this action is the execution of a disruptive Self-Test with the following characteristics: a) The nature of the tests is not specified. b) The test resets the repeater but without affecting management information about the repeater. c) The test does not inject packets onto any segment. d) Packets received during the test may or may not be transferred. e) The test does not interfere with management functions. After performing this self-test, the agent will update the repeater health information (including rptrOperStatus and rptrHealthText), and send a rptrHealth trap.

INT rptrNonDisruptTest

1.3.6.1.2.1.22.1.1.5

INTEGER

read-write

Setting this object to selfTest(2) causes the repeater to perform a agent-specific, non- disruptive self-test that has the following characteristics: a) The nature of the tests is not specified. b) The test does not change the state of the repeater or management information about the repeater. c) The test does not inject packets onto any segment. d) The test does not prevent the relay of any packets. e) The test does not interfere with management functions. After performing this test, the agent will update the repeater health information (including rptrOperStatus and rptrHealthText) and send a rptrHealth trap. Note that this definition allows returning an 'okay' result after doing a trivial test. Setting this object to noSelfTest(1) has no effect. The agent will always return the value noSelfTest(1) when this object is read.

GAU rptrTotalPartitionedPorts

1.3.6.1.2.1.22.1.1.6

Gauge

read-only

This object returns the total number of ports in the repeater whose current state meets all three of the following criteria: rptrPortOperStatus does not have the value notPresent(3), rptrPortAdminStatus is enabled(1), and rptrPortAutoPartitionState is autoPartitioned(2).

rptrGroupInfo

1.3.6.1.2.1.22.1.2

rptrGroupTable

1.3.6.1.2.1.22.1.2.1

not-accessible

Table of descriptive and status information about the groups of ports.

rptrGroupEntry

1.3.6.1.2.1.22.1.2.1.1

not-accessible

An entry in the table, containing information about a single group of ports.

INT rptrGroupIndex

1.3.6.1.2.1.22.1.2.1.1.1

INTEGER

read-only

This object identifies the group within the repeater for which this entry contains information. This value is never greater than rptrGroupCapacity.

STR rptrGroupDescr

1.3.6.1.2.1.22.1.2.1.1.2

DisplayString

read-only

A textual description of the group. This value should include the full name and version identification of the group's hardware type and indicate how the group is differentiated from other types of groups in the repeater. Plug-in Module, Rev A' or 'Barney Rubble 10BASE-T 4-port SIMM socket Version 2.1' are examples of valid group descriptions. It is mandatory that this only contain printable ASCII characters.

OID rptrGroupObjectID

1.3.6.1.2.1.22.1.2.1.1.3

OBJECT IDENTIFIER

read-only

The vendor's authoritative identification of the group. This value may be allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides a straight-forward and unambiguous means for determining what kind of group is being managed. For example, this object could take the value 1.3.6.1.4.1.4242.1.2.14 if vendor 'Flintstones, Inc.' was assigned the subtree 1.3.6.1.4.1.4242, and had assigned the identifier 1.3.6.1.4.1.4242.1.2.14 to its 'Wilma Flintstone 6-Port FOIRL Plug-in Module.'

INT rptrGroupOperStatus

1.3.6.1.2.1.22.1.2.1.1.4

INTEGER

read-only

An object that indicates the operational status of the group. A status of notPresent(4) indicates that the group is temporarily or permanently physically and/or logically not a part of the repeater. It is an implementation-specific matter as to whether the agent effectively removes notPresent entries from the table. A status of operational(2) indicates that the group is functioning, and a status of malfunctioning(3) indicates that the group is malfunctioning in some way.

TIK rptrGroupLastOperStatusChange

1.3.6.1.2.1.22.1.2.1.1.5

TimeTicks

read-only

An object that contains the value of sysUpTime at the time that the value of the rptrGroupOperStatus object for this group last changed. A value of zero indicates that the group's operational status has not changed since the agent last restarted.

INT rptrGroupPortCapacity

1.3.6.1.2.1.22.1.2.1.1.6

INTEGER

read-only

The rptrGroupPortCapacity is the number of ports that can be contained within the group. Valid range is 1-1024. Within each group, the ports are uniquely numbered in the range from 1 to rptrGroupPortCapacity. Note: In practice, this will generally be the number of ports on a module, card, or board, and the port numbers will correspond to numbers marked on the physical embodiment.

rptrPortInfo

1.3.6.1.2.1.22.1.3

rptrPortTable

1.3.6.1.2.1.22.1.3.1

not-accessible

Table of descriptive and status information about the ports.

rptrPortEntry

1.3.6.1.2.1.22.1.3.1.1

not-accessible

An entry in the table, containing information about a single port.

INT rptrPortGroupIndex

1.3.6.1.2.1.22.1.3.1.1.1

INTEGER

read-only

This object identifies the group containing the port for which this entry contains information.

INT rptrPortIndex

1.3.6.1.2.1.22.1.3.1.1.2

INTEGER

read-only

This object identifies the port within the group for which this entry contains information. This value can never be greater than rptrGroupPortCapacity for the associated group.

INT rptrPortAdminStatus

1.3.6.1.2.1.22.1.3.1.1.3

INTEGER

read-write

Setting this object to disabled(2) disables the port. A disabled port neither transmits nor receives. Once disabled, a port must be explicitly enabled to restore operation. A port which is disabled when power is lost or when a reset is exerted shall remain disabled when normal operation resumes. The admin status takes precedence over auto- partition and functionally operates between the auto-partition mechanism and the AUI/PMA. Setting this object to enabled(1) enables the port and exerts a BEGIN on the port's auto-partition state machine. (In effect, when a port is disabled, the value of rptrPortAutoPartitionState for that port is frozen until the port is next enabled. When the port becomes enabled, the rptrPortAutoPartitionState becomes notAutoPartitioned(1), regardless of its pre-disabling state.)

INT rptrPortAutoPartitionState

1.3.6.1.2.1.22.1.3.1.1.4

INTEGER

read-only

The autoPartitionState flag indicates whether the port is currently partitioned by the repeater's auto-partition protection. The conditions that cause port partitioning are specified in partition state machine in Section 9 [IEEE 802.3 Std]. They are not differentiated here.

INT rptrPortOperStatus

1.3.6.1.2.1.22.1.3.1.1.5

INTEGER

read-only

This object indicates the port's operational status. The notPresent(3) status indicates the port is physically removed (note this may or may not be possible depending on the type of port.) The operational(1) status indicates that the port is enabled (see rptrPortAdminStatus) and working, even though it might be auto-partitioned (see rptrPortAutoPartitionState). If this object has the value operational(1) and rptrPortAdminStatus is set to disabled(2), it is expected that this object's value will soon change to notOperational(2).

rptrMonitorPackage

1.3.6.1.2.1.22.2

rptrMonitorRptrInfo

1.3.6.1.2.1.22.2.1

CTR rptrMonitorTransmitCollisions

1.3.6.1.2.1.22.2.1.1

Counter

read-only

This counter is incremented every time the repeater state machine enters the TRANSMIT COLLISION state from any state other than ONE PORT LEFT (Ref: Fig 9-2, IEEE 802.3 Std). The approximate minimum time for rollover of this counter is 16 hours.

rptrMonitorGroupInfo

1.3.6.1.2.1.22.2.2

rptrMonitorGroupTable

1.3.6.1.2.1.22.2.2.1

not-accessible

Table of performance and error statistics for the groups.

rptrMonitorGroupEntry

1.3.6.1.2.1.22.2.2.1.1

not-accessible

An entry in the table, containing total performance and error statistics for a single group. Regular retrieval of the information in this table provides a means of tracking the performance and health of the networked devices attached to this group's ports. The counters in this table are redundant in the sense that they are the summations of information already available through other objects. However, these sums provide a considerable optimization of network management traffic over the otherwise necessary retrieval of the individual counters included in each sum.

INT rptrMonitorGroupIndex

1.3.6.1.2.1.22.2.2.1.1.1

INTEGER

read-only

This object identifies the group within the repeater for which this entry contains information.

CTR rptrMonitorGroupTotalFrames

1.3.6.1.2.1.22.2.2.1.1.2

Counter

read-only

The total number of frames of valid frame length that have been received on the ports in this group and for which the FCSError and CollisionEvent signals were not asserted. This counter is the summation of the values of the rptrMonitorPortReadableFrames counters for all of the ports in the group. This statistic provides one of the parameters necessary for obtaining the packet error rate. The approximate minimum time for rollover of this counter is 80 hours.

CTR rptrMonitorGroupTotalOctets

1.3.6.1.2.1.22.2.2.1.1.3

Counter

read-only

The total number of octets contained in the valid frames that have been received on the ports in this group. This counter is the summation of the values of the rptrMonitorPortReadableOctets counters for all of the ports in the group. This statistic provides an indicator of the total data transferred. The approximate minimum time for rollover of this counter is 58 minutes.

CTR rptrMonitorGroupTotalErrors

1.3.6.1.2.1.22.2.2.1.1.4

Counter

read-only

The total number of errors which have occurred on all of the ports in this group. This counter is the summation of the values of the rptrMonitorPortTotalErrors counters for all of the ports in the group.

rptrMonitorPortInfo

1.3.6.1.2.1.22.2.3

rptrMonitorPortTable

1.3.6.1.2.1.22.2.3.1

not-accessible

Table of performance and error statistics for the ports.

rptrMonitorPortEntry

1.3.6.1.2.1.22.2.3.1.1

not-accessible

An entry in the table, containing performance and error statistics for a single port.

INT rptrMonitorPortGroupIndex

1.3.6.1.2.1.22.2.3.1.1.1

INTEGER

read-only

This object identifies the group containing the port for which this entry contains information.

INT rptrMonitorPortIndex

1.3.6.1.2.1.22.2.3.1.1.2

INTEGER

read-only

This object identifies the port within the group for which this entry contains information.

CTR rptrMonitorPortReadableFrames

1.3.6.1.2.1.22.2.3.1.1.3

Counter

read-only

This object is the number of frames of valid frame length that have been received on this port. This counter is incremented by one for each frame received on this port whose OctetCount is greater than or equal to minFrameSize and less than or equal to maxFrameSize (Ref: IEEE 802.3 Std, 4.4.2.1) and for which the FCSError and CollisionEvent signals are not asserted. This statistic provides one of the parameters necessary for obtaining the packet error rate. The approximate minimum time for rollover of this counter is 80 hours.

CTR rptrMonitorPortReadableOctets

1.3.6.1.2.1.22.2.3.1.1.4

Counter

read-only

This object is the number of octets contained in valid frames that have been received on this port. This counter is incremented by OctetCount for each frame received on this port which has been determined to be a readable frame (i.e., including FCS octets but excluding framing bits and dribble bits). This statistic provides an indicator of the total data transferred. The approximate minimum time for rollover of this counter is 58 minutes.

CTR rptrMonitorPortFCSErrors

1.3.6.1.2.1.22.2.3.1.1.5

Counter

read-only

This counter is incremented by one for each frame received on this port with the FCSError signal asserted and the FramingError and CollisionEvent signals deasserted and whose OctetCount is greater than or equal to minFrameSize and less than or equal to maxFrameSize (Ref: 4.4.2.1, IEEE 802.3 Std). The approximate minimum time for rollover of this counter is 80 hours.

CTR rptrMonitorPortAlignmentErrors

1.3.6.1.2.1.22.2.3.1.1.6

Counter

read-only

This counter is incremented by one for each frame received on this port with the FCSError and FramingError signals asserted and CollisionEvent signal deasserted and whose OctetCount is greater than or equal to minFrameSize and less than or equal to maxFrameSize (Ref: IEEE 802.3 Std, 4.4.2.1). If rptrMonitorPortAlignmentErrors is incremented then the rptrMonitorPortFCSErrors Counter shall not be incremented for the same frame. The approximate minimum time for rollover of this counter is 80 hours.

CTR rptrMonitorPortFrameTooLongs

1.3.6.1.2.1.22.2.3.1.1.7

Counter

read-only

This counter is incremented by one for each frame received on this port whose OctetCount is greater than maxFrameSize (Ref: 4.4.2.1, IEEE 802.3 Std). If rptrMonitorPortFrameTooLongs is incremented then neither the rptrMonitorPortAlignmentErrors nor the rptrMonitorPortFCSErrors counter shall be incremented for the frame. The approximate minimum time for rollover of this counter is 61 days.

CTR rptrMonitorPortShortEvents

1.3.6.1.2.1.22.2.3.1.1.8

Counter

read-only

This counter is incremented by one for each CarrierEvent on this port with ActivityDuration less than ShortEventMaxTime. ShortEventMaxTime is greater than 74 bit times and less than 82 bit times. ShortEventMaxTime has tolerances included to provide for circuit losses between a conformance test point at the AUI and the measurement point within the state machine. Note: shortEvents may indicate externally generated noise hits which will cause the repeater to transmit Runts to its other ports, or propagate a collision (which may be late) back to the transmitting DTE and damaged frames to the rest of the network. Implementors may wish to consider selecting the ShortEventMaxTime towards the lower end of the allowed tolerance range to accommodate bit losses suffered through physical channel devices not budgeted for within this standard. The approximate minimum time for rollover of this counter is 16 hours.

CTR rptrMonitorPortRunts

1.3.6.1.2.1.22.2.3.1.1.9

Counter

read-only

This counter is incremented by one for each CarrierEvent on this port that meets one of the following two conditions. Only one test need be made. a) The ActivityDuration is greater than ShortEventMaxTime and less than ValidPacketMinTime and the CollisionEvent signal is deasserted. b) The OctetCount is less than 64, the ActivityDuration is greater than ShortEventMaxTime and the CollisionEvent signal is deasserted. ValidPacketMinTime is greater than or equal to 552 bit times and less than 565 bit times. An event whose length is greater than 74 bit times but less than 82 bit times shall increment either the shortEvents counter or the runts counter but not both. A CarrierEvent greater than or equal to 552 bit times but less than 565 bit times may or may not be counted as a runt. ValidPacketMinTime has tolerances included to provide for circuit losses between a conformance test point at the AUI and the measurement point within the state machine. Runts usually indicate collision fragments, a normal network event. In certain situations associated with large diameter networks a percentage of collision fragments may exceed ValidPacketMinTime. The approximate minimum time for rollover of this counter is 16 hours.

CTR rptrMonitorPortCollisions

1.3.6.1.2.1.22.2.3.1.1.10

Counter

read-only

This counter is incremented by one for any CarrierEvent signal on any port for which the CollisionEvent signal on this port is also asserted. The approximate minimum time for rollover of this counter is 16 hours.

CTR rptrMonitorPortLateEvents

1.3.6.1.2.1.22.2.3.1.1.11

Counter

read-only

This counter is incremented by one for each CarrierEvent on this port in which the CollIn(X) variable transitions to the value SQE (Ref: 9.6.6.2, IEEE 802.3 Std) while the ActivityDuration is greater than the LateEventThreshold. Such a CarrierEvent is counted twice, as both a collision and as a lateEvent. The LateEventThreshold is greater than 480 bit times and less than 565 bit times. LateEventThreshold has tolerances included to permit an implementation to build a single threshold to serve as both the LateEventThreshold and ValidPacketMinTime threshold. The approximate minimum time for rollover of this counter is 81 hours.

CTR rptrMonitorPortVeryLongEvents

1.3.6.1.2.1.22.2.3.1.1.12

Counter

read-only

This counter is incremented by one for each CarrierEvent on this port whose ActivityDuration is greater than the MAU Jabber Lockup Protection timer TW3 (Ref: 9.6.1 & 9.6.5, IEEE 802.3 Std). Other counters may be incremented as appropriate.

CTR rptrMonitorPortDataRateMismatches

1.3.6.1.2.1.22.2.3.1.1.13

Counter

read-only

This counter is incremented by one for each frame received on this port that meets all of the following conditions: a) The CollisionEvent signal is not asserted. b) The ActivityDuration is greater than ValidPacketMinTime. c) The frequency (data rate) is detectably mismatched from the local transmit frequency. The exact degree of mismatch is vendor specific and is to be defined by the vendor for conformance testing. When this event occurs, other counters whose increment conditions were satisfied may or may not also be incremented, at the implementor's discretion. Whether or not the repeater was able to maintain data integrity is beyond the scope of this standard.

CTR rptrMonitorPortAutoPartitions

1.3.6.1.2.1.22.2.3.1.1.14

Counter

read-only

This counter is incremented by one for each time the repeater has automatically partitioned this port. The conditions that cause port partitioning are specified in the partition state machine in Section 9 [IEEE 802.3 Std]. They are not differentiated here.

CTR rptrMonitorPortTotalErrors

1.3.6.1.2.1.22.2.3.1.1.15

Counter

read-only

The total number of errors which have occurred on this port. This counter is the summation of the values of other error counters (for the same port), namely: rptrMonitorPortFCSErrors, rptrMonitorPortAlignmentErrors, rptrMonitorPortFrameTooLongs, rptrMonitorPortShortEvents, rptrMonitorPortLateEvents, rptrMonitorPortVeryLongEvents, and rptrMonitorPortDataRateMismatches. This counter is redundant in the sense that it is the summation of information already available through other objects. However, it is included specifically because the regular retrieval of this object as a means of tracking the health of a port provides a considerable optimization of network management traffic over the otherwise necessary retrieval of the summed counters.

rptrAddrTrackPackage

1.3.6.1.2.1.22.3

rptrAddrTrackRptrInfo

1.3.6.1.2.1.22.3.1

rptrAddrTrackGroupInfo

1.3.6.1.2.1.22.3.2

rptrAddrTrackPortInfo

1.3.6.1.2.1.22.3.3

rptrAddrTrackTable

1.3.6.1.2.1.22.3.3.1

not-accessible

Table of address mapping information about the ports.

rptrAddrTrackEntry

1.3.6.1.2.1.22.3.3.1.1

not-accessible

An entry in the table, containing address mapping information about a single port.

INT rptrAddrTrackGroupIndex

1.3.6.1.2.1.22.3.3.1.1.1

INTEGER

read-only

This object identifies the group containing the port for which this entry contains information.

INT rptrAddrTrackPortIndex

1.3.6.1.2.1.22.3.3.1.1.2

INTEGER

read-only

This object identifies the port within the group for which this entry contains information.

MAC rptrAddrTrackLastSourceAddress

1.3.6.1.2.1.22.3.3.1.1.3

MacAddress

read-only

This object is the SourceAddress of the last readable frame (i.e., counted by rptrMonitorPortReadableFrames) received by this port. This object has been deprecated because its value is undefined when no frames have been observed on this port. The replacement object is rptrAddrTrackNewLastSrcAddress.

CTR rptrAddrTrackSourceAddrChanges

1.3.6.1.2.1.22.3.3.1.1.4

Counter

read-only

This counter is incremented by one for each time that the rptrAddrTrackLastSourceAddress attribute for this port has changed. This may indicate whether a link is connected to a single DTE or another multi-user segment. The approximate minimum time for rollover of this counter is 81 hours.

OCT rptrAddrTrackNewLastSrcAddress

1.3.6.1.2.1.22.3.3.1.1.5

OCTET STRING

read-only

This object is the SourceAddress of the last readable frame (i.e., counted by rptrMonitorPortReadableFrames) received by this port. If no frames have been received by this port since the agent began monitoring the port activity, the agent shall return a string of length zero.

iTouch

1.3.6.1.4.1.33

NTF resourceFailure

1.3.6.1.4.1.33.0.9

Indication that a system resource lack occurred of the type resType.

xSystem

1.3.6.1.4.1.33.1

NTF resourceLack

1.3.6.1.4.1.33.1.0.1

Indication that the system incremented the corresponding value of resLacks.

STR sysIdent

1.3.6.1.4.1.33.1.1

DisplayString

read-write

An identification string for local and remote displays. Corresponds directly to SERVER IDENTIFICATION and the value labeled 'Identification:' on the SERVER CHARACTERISTICS display.

INT sysDefineMode

1.3.6.1.4.1.33.1.2

INTEGER

read-write

The system's operation with regard to DEFINE commands. 'permOnly' indicates that DEFINE commands modify only the permanent data base. 'operAndPerm' indicates that DEFINE commands modify both operational and permanent data bases, unless specifically documented to the contrary. Corresponds to SERVER CHANGE and the presence of the label CHANGE in the SERVER CHARACTERISTICS display.

DAT sysDateTime

1.3.6.1.4.1.33.1.3

DateTime

read-write

The system's current local date and time. Corresponds directly to SERVER DATE and SERVER TIME and the value in various displays.

OCT sysTimeZone

1.3.6.1.4.1.33.1.4

OCTET STRING

read-write

The adjustment to apply to a universal (Greenwich) time received when down-line loaded, comprising two octets. The first octet is the number of hours west of universal, the second is the number of minutes. Corresponds directly to SERVER TIMEZONE and the value labeled 'Timezone:' in the SERVER CHARACTERISTICS display.

STR sysLoadSoftware

1.3.6.1.4.1.33.1.5

DisplayString

read-write

The software file name to request for down-line load of the server. Corresponds directly to SERVER SOFTWARE, and the value labeled 'Software:' in the SERVER CHARACTERISTICS display.

INT sysDump

1.3.6.1.4.1.33.1.6

INTEGER

read-write

Control for dumping the system's memory when the system crashes. Corresponds directly to SERVER DUMP and the presence of 'Dump' under the label 'Enabled Characteristics' in the SERVER CHARACTERISTICS display.

OCT sysMaintenancePassword

1.3.6.1.4.1.33.1.7

OCTET STRING

read-write

The password a management system must supply to force the system to reboot or use the system's remote console via the Maintenance Operation Protocol (MOP). Corresponds directly to SERVER MAINTENANCE PASSWORD. When setting this value, the management system must supply eight octets, filling with zeros from the first octet. That is, the value '1ab42' would be expressed as '0.0.0.0.0.1.ab.42'. Setting the value to zero disables the password check. When returning this value, the agent always returns a zero length OCTET STRING.

STR sysLocalName

1.3.6.1.4.1.33.1.8

DisplayString

read-write

The system's local name. Corresponds directly to SERVER NAME and the value labeled 'Name:' in the SERVER CHARACTERISTICS display.

INT sysSoftwareVersionType

1.3.6.1.4.1.33.1.9

INTEGER

read-only

The software version variant running in the system. Corresponds to the letter in the software version in the SERVER CHARACTERISTICS display. alpha 'A': alpha test beta 'B': beta test production null: normal, production software special 'S': special, custom software

OCT sysSoftwareVersion

1.3.6.1.4.1.33.1.10

OCTET STRING

read-only

The software version running in the system. In order, the octets contain major version, minor version, ECO, and pre-release number. Corresponds to the numbers in the software version in the SERVER CHARACTERISTICS display. For example, the version display for sysSoftwareVersionType 'production' and sysSoftwareVersion '2.2.0.0' is 'V2.2'. The version display for sysSoftwareVersionType 'beta' and sysSoftwareVersion '3.1.0.4' is 'V3.1B4'.

INT sysRomVersion

1.3.6.1.4.1.33.1.11

INTEGER

read-only

The firmware version of the bootstrap ROM installed in the system. Corresponds directly to the value labeled 'Rom' in the SERVER CHARACTERISTICS display.

HAR sysHardwareType

1.3.6.1.4.1.33.1.12

HardwareType

read-only

The type of hardware on which the system is running. Corresponds directly to the value labeled 'Hardware Type:' in the UNIT display.

INT sysHardwareVersion

1.3.6.1.4.1.33.1.13

INTEGER

read-only

This version of hardware on which the system is running. Corresponds directly to part of the value labeled 'HW' in the SERVER CHARACTERISTICS display.

CHA sysChassisType

1.3.6.1.4.1.33.1.14

ChassisType

read-only

The type of chassis in which the system is running. Corresponds directly to part of the value labeled 'HW' in the SERVER CHARACTERISTICS display.

INT sysChassisVersion

1.3.6.1.4.1.33.1.15

INTEGER

read-only

This version of chassis in which the system is running. Corresponds directly to part of the value labeled 'HW' in the SERVER CHARACTERISTICS display.

INT sysCrash

1.3.6.1.4.1.33.1.16

INTEGER

read-write

Control to cause this system to crash. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting it to 'execute' causes an immediate crash. Corresponds to the CRASH command.

INT sysInitialize

1.3.6.1.4.1.33.1.17

INTEGER

read-write

Control to cause this system to reset its software to initial load values, typically by reloading. When executing an initialize command, the system observes the value of sysInitializeDelay as supplied anywhere in the same set request with sysInitialize. If this value is not included in the set request, the system uses its default value. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting it to 'conditionalExecute' causes initialization if the overall system state is acceptible (such as not needing to store permanent parameters). Setting it to 'unconditionalExecute' causes initialization regardless of the overall system state. Setting it to 'cancel' aborts an initialization that has not yet started. According to standard SNMP operation, if the system is not in a proper state to accept a given set request for this value, it returns the standard SNMP error 'badValue'. Corresponds to the INITIALIZE command.

INT sysInitializeDelay

1.3.6.1.4.1.33.1.18

INTEGER

read-write

The number of minutes to delay before beginning the system initialization process as executed with sysInitialize. This value cannot be set outside a set-request that contains the value 'execute' for sysInitialize. If not included in such a set, the default value is 1. Corresponds to the INITIALIZE command's DELAY parameter and to the value labeled 'Minutes to shutdown:' in the SYSTEM STATUS display.

INT sysZeroAll

1.3.6.1.4.1.33.1.19

INTEGER

read-write

Control to zero all counters. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting it to 'execute' causes all the system's counters to be zeroed. Corresponds to the ZERO ALL command.

INT sysZeroBase

1.3.6.1.4.1.33.1.20

INTEGER

read-write

Control to zero all base counters. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting it to 'execute' causes all the system's base counters to be zeroed. Examples of counters that are zeroed are the SNMP counters or the counters from the SYSTEM COUNTERS display. Examples of counters that are not zeroed are Ethernet interface counters or port counters. Corresponds to the ZERO SYSTEM command.

TIK sysZeroBaseTime

1.3.6.1.4.1.33.1.21

TimeTicks

read-only

The number hundredths of a second since the most recent zeroing of the base counters, such as through execution of sysZeroAll or sysZeroBase. Corresponds directly to the value labeled 'Seconds Since Zeroed:' in the SERVER COUNTERS display.

STR sysLoaderName

1.3.6.1.4.1.33.1.22

DisplayString

read-only

The name of the system that provided this system's running software. Corresponds directly to the value labeled 'Primary Host:' in the SERVER STATUS display.

ADR sysLoaderAddressType

1.3.6.1.4.1.33.1.23

AddressType

read-only

The type of network address contained in sysLoaderAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'local' means there is no address and this system's software was loaded from local storage. 'ip' is an Internet IP address. 'ethernet' is an 802.3 MAC address. Corresponds indirectly to the value labeled 'Load Address:' in the SERVER STATUS display.

OCT sysLoaderAddress

1.3.6.1.4.1.33.1.24

OCTET STRING

read-only

The network address of the system that provided this system's running software. Corresponds directly to the value labeled 'Load Address:' in the SERVER STATUS display.

ADR sysDumperAddressType

1.3.6.1.4.1.33.1.25

AddressType

read-only

The type of network address contained in sysDumperAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'local' means there is no address and this system's was dumped to local storage. 'ip' is an Internet IP address. 'ethernet' is an 802.3 MAC address. Corresponds indirectly to the value labeled 'Dump Address:' in the SERVER STATUS display.

OCT sysDumperAddress

1.3.6.1.4.1.33.1.26

OCTET STRING

read-only

The network address of the system that most recently accepted a crash dump from this system. Corresponds directly to the value labeled 'Dump Address:' in the SERVER STATUS display.

CTR sysResourceLacks

1.3.6.1.4.1.33.1.27

Counter

read-only

The number of times a local resource allocation failed, for example due to lack of dynamic memory. Corresponds directly to the value labeled 'Resource Errors:' in the SERVER STATUS display.

INT sysChassisState

1.3.6.1.4.1.33.1.28

INTEGER

read-only

For chassis-based systems, the state of the overall chassis. 'notApplicable' indicates the system is not chassis based. 'noFault' indicates no current chassis problem. 'fault' indicates a current chassis problem such as a card or power supply failure. Corresponds directly to the value labeled 'Crate Current State: in the SERVER ALTERNATE STATUS display.

CTR sysChassisFaultTransitions

1.3.6.1.4.1.33.1.29

Counter

read-only

The number of times this system has seen sysChassisState switch from 'noFault' to 'fault' or from 'fault' to 'noFault'. Corresponds directly to the value labeled 'Crate Transition Count: in the SERVER ALTERNATE STATUS display.

INT sysResourceNumber

1.3.6.1.4.1.33.1.30

INTEGER

read-only

The number of resource entries in the Resource table.

INT sysFeatureNumber

1.3.6.1.4.1.33.1.31

INTEGER

read-only

The number of feature entries in the Feature table.

resTable

1.3.6.1.4.1.33.1.32

not-accessible

A list of resource entries. The number of entries is given by the value of sysResourceNumber.

resEntry

1.3.6.1.4.1.33.1.32.1

not-accessible

Status values for a system resource.

INT resType

1.3.6.1.4.1.33.1.32.1.1

INTEGER

read-only

Identification of a resource type. Typically corresponds directly to a label such as 'Processes:' in the SERVER ALTERNATE STATUS display.

GAU resCurrent

1.3.6.1.4.1.33.1.32.1.2

Gauge

read-only

The number of resources currently in use on the system. Typically corresponds directly to a value labeled 'Cur' in the SERVER ALTERNATE STATUS display.

GAU resWorst

1.3.6.1.4.1.33.1.32.1.3

Gauge

read-only

The highest or lowest value of resCurrent since system initialization. Typically corresponds directly to a value labeled 'High' or 'Low' in the SERVER ALTERNATE STATUS display.

INT resAdminMaximum

1.3.6.1.4.1.33.1.32.1.4

INTEGER

read-write

The desired maximum possible number of resources in the system. In many cases, ACCESS to this object for a particular resType is read-only. Typically corresponds directly to a value labeled 'Max' in the SERVER ALTERNATE STATUS display for desired, administrative values. When the desired change takes effect is implementation specific, ranging from immediately to the next system initialization.

CTR resLacks

1.3.6.1.4.1.33.1.32.1.5

Counter

read-only

The number of times since system initialization that the system could not obtain the resource because none were available. Typically corresponds directly to a value labeled 'Failure' in the SERVER ALTERNATE STATUS display. If such failures do not apply to the particular resource, such as 'cpuPercent', the agent returns zero for this object.

DAT resLackTime

1.3.6.1.4.1.33.1.32.1.6

DateTime

read-only

The local system date and time when resLack last increased. Typically corresponds directly to a value labeled 'Last Occurred' in the SERVER ALTERNATE STATUS display. If such failures do not apply to the particular resource, such as 'cpuPercent', the agent returns all zeroes (unknown) for this object.

INT resOperMaximum

1.3.6.1.4.1.33.1.32.1.7

INTEGER

read-only

The current maximum possible number of resources in the system. Typically corresponds directly to a value labeled 'Max' in the SERVER ALTERNATE STATUS display for current operational values. This value is based on current or previous value of resAdminMaximum.

featTable

1.3.6.1.4.1.33.1.33

not-accessible

A list of feature entries. The number of entries is given by the value of sysFeatureNumber.

featEntry

1.3.6.1.4.1.33.1.33.1

not-accessible

Status values for a system feature.

INT featType

1.3.6.1.4.1.33.1.33.1.1

INTEGER

read-only

Identification of a feature type. Corresponds to a SERVER feature keyword.

INT featStatus

1.3.6.1.4.1.33.1.33.1.2

INTEGER

read-write

The status of the feature as of the next system initialization. Corresponds to the presence of the feature's lable following the label 'Enabled Feature(s): in the UNIT display.

STR featKey

1.3.6.1.4.1.33.1.33.1.3

DisplayString

read-write

The key a management system must supply to make a locked feature available. When unlocking a feature and the management system does not supply a value for featStatus, that object's value is implementation dependent. When returning this value, the agent always returns a zero length DisplayString.

xBootControl

1.3.6.1.4.1.33.1.34

STR bootControlLoadInternetFile

1.3.6.1.4.1.33.1.34.1

DisplayString

read-write

The filename to request when loading an image via TFTP. Corresponds directly to SERVER INTERNET LOAD FILE and the value labeled 'Internet Load File:' in the SERVER BOOT CHARACTERISTICS display.

IP bootControlLoadInternetServer

1.3.6.1.4.1.33.1.34.2

IpAddress

read-write

The internet address of the server to use when loading an image via TFTP. Corresponds directly to SERVER INTERNET LOAD HOST and the value labeled 'Internet Load Host:' in the SERVER BOOT CHARACTERISTICS display.

IP bootControlLoadInternetGateway

1.3.6.1.4.1.33.1.34.3

IpAddress

read-write

The internet address of the gateway to use when loading an image via TFTP. Corresponds directly to SERVER INTERNET LOAD GATEWAY and the value labeled 'Internet Load Gateway:' in the SERVER BOOT CHARACTERISTICS display.

INT bootControlLoadBootpTftp

1.3.6.1.4.1.33.1.34.4

INTEGER

read-write

Control for loading via the combination of BOOTP and TFTP. Corresponds to SERVER LOAD PROTOCOL BOOTPTFTP and the presence of 'BOOTP/TFTP/' following the label 'Load Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.

INT bootControlLoadTftpDirect

1.3.6.1.4.1.33.1.34.5

INTEGER

read-write

Control for loading via directed TFTP. Corresponds to SERVER LOAD PROTOCOL TFTPDIRECT and the presence of 'TFTPDIRECT' following the label 'Load Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.

INT bootControlLoadLocal

1.3.6.1.4.1.33.1.34.6

INTEGER

read-write

Control for loading from a local medium. Corresponds to SERVER LOAD PROTOCOL LOCAL and the presence of 'LOCAL' following the label 'Load Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.

INT bootControlLoadMop

1.3.6.1.4.1.33.1.34.7

INTEGER

read-write

Control for loading via DEC MOP. Corresponds to SERVER LOAD PROTOCOL MOP and the presence of 'MOP' following the label 'Load Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.

INT bootControlLoadProprietary

1.3.6.1.4.1.33.1.34.8

INTEGER

read-write

Control for loading via ITouch-proprietary extended MOP. Corresponds to SERVER LOAD PROTOCOL PROPRIETARY and the presence of 'Proprietary' following the label 'Load Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.

INT bootControlLoadRarpTftp

1.3.6.1.4.1.33.1.34.9

INTEGER

read-write

Control for loading via the combination of RARP and TFTP. Corresponds to SERVER LOAD PROTOCOL RARPTFTP and the presence of 'RARP/TFTP' following the label 'Load Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.

INT bootControlDumpBootpTftp

1.3.6.1.4.1.33.1.34.10

INTEGER

read-write

Control for dumping via the combination of BOOTP and TFTP. Corresponds to SERVER DUMP PROTOCOL BOOTPTFTP and the presence of 'BOOTP/TFTP' following the label 'Dump Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.

INT bootControlDumpLocal

1.3.6.1.4.1.33.1.34.11

INTEGER

read-write

Control for dumping to a local medium. Corresponds to SERVER DUMP PROTOCOL LOCAL and the presence of 'Local' following the label 'Dump Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.

INT bootControlDumpMop

1.3.6.1.4.1.33.1.34.12

INTEGER

read-write

Control for dumping via DEC MOP. Corresponds to SERVER DUMP PROTOCOL MOP and the presence of 'MOP' following the label 'Dump Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.

INT bootControlDumpProprietary

1.3.6.1.4.1.33.1.34.13

INTEGER

read-write

Control for dumping via ITouch-proprietary extended MOP. Corresponds to SERVER DUMP PROTOCOL PROPRIETARY and the presence of 'Proprietary' following the label 'Dump Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.

INT bootControlDumpRarpTftp

1.3.6.1.4.1.33.1.34.14

INTEGER

read-write

Control for dumping via the combination of RARP and TFTP. Corresponds to SERVER DUMP PROTOCOL RARPTFTP and the presence of 'RARP/TFTP' following the label 'Dump Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.

INT bootControlParamBootpTftp

1.3.6.1.4.1.33.1.34.15

INTEGER

read-write

Control for loading parameters via the combination of BOOTP and TFTP. Corresponds to SERVER PARAMETER PROTOCOL MOP and the presence of 'BOOTP/TFTP' following the label 'Parameter Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.

INT bootControlParamLocal

1.3.6.1.4.1.33.1.34.16

INTEGER

read-write

Control for loading parameters from a local medium. Corresponds to SERVER PARAMETER PROTOCOL LOCAL and the presence of 'LOCAL' following the label 'Parameter Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.

INT bootControlParamMop

1.3.6.1.4.1.33.1.34.17

INTEGER

read-write

Control for loading parameters via DEC MOP. Corresponds to SERVER PARAMETER PROTOCOL MOP and the presence of 'MOP' following the label 'Parameter Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.

INT bootControlParamProprietary

1.3.6.1.4.1.33.1.34.18

INTEGER

read-write

Control for loading parameters via ITouch-proprietary extended MOP. Corresponds to SERVER PARAMETER PROTOCOL PROPRIETARY and the presence of 'Proprietary' following the label 'Parameter Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.

INT bootControlParamRarpTftp

1.3.6.1.4.1.33.1.34.19

INTEGER

read-write

Control for loading parameters via the combination of RARP and TFTP. Corresponds to SERVER PARAMETER PROTOCOL RARPTFTP and the presence of 'RARP/TFTP' following the label 'Parameter Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.

GAU sysInstalledMemory

1.3.6.1.4.1.33.1.35

Gauge

read-only

The total number of bytes of main memory installed in the system. Corresponds directly to the value labeled 'Installed' on the SERVER ALTERNATE STATUS display. A value of 0 indicates standard memory for the particular hardware.

INT sysTemperatureLevel

1.3.6.1.4.1.33.1.36

INTEGER

read-only

The temperature level of the system. 'unknown' indicates the system does not support a temperature sensor. 'normal' indicates a normal temperature level. 'high' indicates an excessive temperature level. Corresponds directly to the value labeled 'Temperature Level:' in the SERVER ALTERNATE STATUS display.

bootRecordTable

1.3.6.1.4.1.33.1.37

not-accessible

A list of boot control records.

bootRecordEntry

1.3.6.1.4.1.33.1.37.1

not-accessible

Values for a boot record.

INT bootRecordIndex

1.3.6.1.4.1.33.1.37.1.1

INTEGER

read-only

An index value that uniquely identifies a boot control record entry, from 1 to the number of entries for the system.

STR bootRecordLoadInternetFile

1.3.6.1.4.1.33.1.37.1.2

DisplayString

read-write

The filename to request when loading an image via TFTP. Corresponds directly to SERVER INTERNET LOAD FILE and the value labeled 'Internet Load File:' in the SERVER BOOT CHARACTERISTICS display.

IP bootRecordLoadInternetServer

1.3.6.1.4.1.33.1.37.1.3

IpAddress

read-write

The internet address of the server to use when loading an image via TFTP. Corresponds directly to SERVER INTERNET LOAD HOST and the value labeled 'Internet Load Host:' in the SERVER BOOT CHARACTERISTICS display.

IP bootRecordLoadInternetGateway

1.3.6.1.4.1.33.1.37.1.4

IpAddress

read-write

The internet address of the gateway to use when loading an image via TFTP. Corresponds directly to SERVER INTERNET LOAD GATEWAY and the value labeled 'Internet Load Gateway:' in the SERVER BOOT CHARACTERISTICS display.

INT bootRecordLoadBootpTftp

1.3.6.1.4.1.33.1.37.1.5

INTEGER

read-write

Control for loading via the combination of BOOTP and TFTP. Corresponds to SERVER LOAD PROTOCOL BOOTPTFTP and the presence of 'BOOTP/TFTP/' following the label 'Load Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.

INT bootRecordLoadTftpDirect

1.3.6.1.4.1.33.1.37.1.6

INTEGER

read-write

Control for loading via directed TFTP. Corresponds to SERVER LOAD PROTOCOL TFTPDIRECT and the presence of 'TFTPDIRECT' following the label 'Load Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.

INT bootRecordLoadLocal

1.3.6.1.4.1.33.1.37.1.7

INTEGER

read-write

Control for loading from a local medium. Corresponds to SERVER LOAD PROTOCOL LOCAL and the presence of 'LOCAL' following the label 'Load Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.

INT bootRecordLoadMop

1.3.6.1.4.1.33.1.37.1.8

INTEGER

read-write

Control for loading via DEC MOP. Corresponds to SERVER LOAD PROTOCOL MOP and the presence of 'MOP' following the label 'Load Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.

INT bootRecordLoadProprietary

1.3.6.1.4.1.33.1.37.1.9

INTEGER

read-write

Control for loading via ITouch-proprietary extended MOP. Corresponds to SERVER LOAD PROTOCOL PROPRIETARY and the presence of 'Proprietary' following the label 'Load Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.

INT bootRecordLoadRarpTftp

1.3.6.1.4.1.33.1.37.1.10

INTEGER

read-write

Control for loading via the combination of RARP and TFTP. Corresponds to SERVER LOAD PROTOCOL RARPTFTP and the presence of 'RARP/TFTP' following the label 'Load Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.

INT bootRecordDumpBootpTftp

1.3.6.1.4.1.33.1.37.1.11

INTEGER

read-write

Control for dumping via the combination of BOOTP and TFTP. Corresponds to SERVER DUMP PROTOCOL BOOTPTFTP and the presence of 'BOOTP/TFTP' following the label 'Dump Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.

INT bootRecordDumpLocal

1.3.6.1.4.1.33.1.37.1.12

INTEGER

read-write

Control for dumping to a local medium. Corresponds to SERVER DUMP PROTOCOL LOCAL and the presence of 'Local' following the label 'Dump Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.

INT bootRecordDumpMop

1.3.6.1.4.1.33.1.37.1.13

INTEGER

read-write

Control for dumping via DEC MOP. Corresponds to SERVER DUMP PROTOCOL MOP and the presence of 'MOP' following the label 'Dump Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.

INT bootRecordDumpProprietary

1.3.6.1.4.1.33.1.37.1.14

INTEGER

read-write

Control for dumping via ITouch-proprietary extended MOP. Corresponds to SERVER DUMP PROTOCOL PROPRIETARY and the presence of 'Proprietary' following the label 'Dump Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.

INT bootRecordDumpRarpTftp

1.3.6.1.4.1.33.1.37.1.15

INTEGER

read-write

Control for dumping via the combination of RARP and TFTP. Corresponds to SERVER DUMP PROTOCOL RARPTFTP and the presence of 'RARP/TFTP' following the label 'Dump Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.

INT bootRecordParamBootpTftp

1.3.6.1.4.1.33.1.37.1.16

INTEGER

read-write

Control for loading parameters via the combination of BOOTP and TFTP. Corresponds to SERVER PARAMETER PROTOCOL MOP and the presence of 'BOOTP/TFTP' following the label 'Parameter Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.

INT bootRecordParamLocal

1.3.6.1.4.1.33.1.37.1.17

INTEGER

read-write

Control for loading parameters from a local medium. Corresponds to SERVER PARAMETER PROTOCOL LOCAL and the presence of 'LOCAL' following the label 'Parameter Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.

INT bootRecordParamMop

1.3.6.1.4.1.33.1.37.1.18

INTEGER

read-write

Control for loading parameters via DEC MOP. Corresponds to SERVER PARAMETER PROTOCOL MOP and the presence of 'MOP' following the label 'Parameter Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.

INT bootRecordParamProprietary

1.3.6.1.4.1.33.1.37.1.19

INTEGER

read-write

Control for loading parameters via ITouch-proprietary extended MOP. Corresponds to SERVER PARAMETER PROTOCOL PROPRIETARY and the presence of 'Proprietary' following the label 'Parameter Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.

INT bootRecordParamRarpTftp

1.3.6.1.4.1.33.1.37.1.20

INTEGER

read-write

Control for loading parameters via the combination of RARP and TFTP. Corresponds to SERVER PARAMETER PROTOCOL RARPTFTP and the presence of 'RARP/TFTP' following the label 'Parameter Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.

INT bootRecordStatus

1.3.6.1.4.1.33.1.37.1.21

INTEGER

read-write

The status of the entry. Set to 'disabled' to disable the entry.

STR bootRecordMopFile

1.3.6.1.4.1.33.1.37.1.22

DisplayString

read-write

The software file name to request for down-line load of the server via MOP or XMOP.

IP bootRecordInternetAddress

1.3.6.1.4.1.33.1.37.1.23

IpAddress

read-write

The internet address of the system is to use for itself when loading via TFTP. The value 0.0.0.0 indicates default action.

INT bootRecordParamTftpDirect

1.3.6.1.4.1.33.1.37.1.24

INTEGER

read-write

Control for loading parameters via the protocol DTFTP. Corresponds to SERVER PARAMETER PROTOCOL DTFTP and the presence of 'DTFTP' following the label 'Parameter Protocols Enabled:' in the SERVER BOOT CHARACTERISTICS display.

STR bootRecordInternetDelimiter

1.3.6.1.4.1.33.1.37.1.25

DisplayString

read-write

The character separating the load file directory name from the file name.

INT sysLastAgentError

1.3.6.1.4.1.33.1.38

INTEGER

read-only

The most recent error the agent encountered in attempting to satisfy an SNMP request. Reading this value has the side effect of resetting it to 'noError'.

INT sysRcpMulticast

1.3.6.1.4.1.33.1.40

INTEGER

read-write

Control for sending of the MOP RCP system identifier message. Corresponds directly to the presence of 'RCP Multicast' under the label 'Enabled Characteristics' in the SERVER CHARACTERISTICS display.

ADR sysTimeServerAddress

1.3.6.1.4.1.33.1.41

TypedAddress

read-only

The address of the time server, either an IpAddr or an ethernet address.

ADR sysTimeServerConfiguredAddress

1.3.6.1.4.1.33.1.46

TypedAddress

read-write

The address of a configured time server (, either an IpAddr or an ethernet address).

INT sysTimeServerConfiguredStatus

1.3.6.1.4.1.33.1.47

INTEGER

read-write

Control whether the sysTimeServerConfiguredAddress is the only time server used to obtain the time (REQUIRED), the first time server used to obtain the time (ENABLED), or not used to obtain the time (DISABLED).

INT sysBootRecordOverrideDefinedAddress

1.3.6.1.4.1.33.1.48

INTEGER

read-write

Control to override the internally defined Internet address with that obtained from the bootp loading protocol.

INT sysBootRecordMessageEnable

1.3.6.1.4.1.33.1.49

INTEGER

read-write

Control to display load status messages during reboot. Corresponds directly to the value labeled 'Status Message:' in the SERVER LOADDUMP display.

INT sysBootRecordParamDefaults

1.3.6.1.4.1.33.1.50

INTEGER

read-write

Control to use default parameters upon the next reboot after which time this control reverts to disabled. This control only applies to stand-alone devices. Corresponds directly to the value labeled 'Default Parameters:' in the SERVER LOADDUMP display.

INT sysLoginAuthFailureTrapType

1.3.6.1.4.1.33.1.78

INTEGER

read-only

Indicates the type of authentication failure which last occurred.

STR sysLoginAuthTrapIdentity

1.3.6.1.4.1.33.1.81

DisplayString

read-only

An identification string for the circuit or port where an authentication failure last occurred.

INT sysLocalScriptServer

1.3.6.1.4.1.33.1.82

INTEGER

read-write

Control to allow script serving for this system from a script residing in a local flash card.

INT sysInReachManagementSecurityStatus

1.3.6.1.4.1.33.1.83

INTEGER

read-only

Indicates whether per port authentication is in use. This includes username, password, privilege level, and list of power outlets controlled by that user, or console connections allowed from that port.

STR sysProductName

1.3.6.1.4.1.33.1.84

DisplayString

read-only

Displays the product name of this system.

INT sysModemPresent

1.3.6.1.4.1.33.1.85

INTEGER

read-only

Indicates whether this system has a built-in modem.

INT sysCauseAction

1.3.6.1.4.1.33.1.86

INTEGER

read-write

A control for toggling the cause action feature. Corresponds directly to the presence of 'Trigger/Action' under the label 'Enabled Characteristics:' in the SERVER CHARACTERISTICS display. The desired change will not take effect until the next system initialization.

INT sysWebServerConfigAdminStatus

1.3.6.1.4.1.33.1.87

INTEGER

read-write

A control for bring the web server up or down. Corresponds directly to the presence of 'Web Server' under the label 'Enabled Characteristics:' in the SERVER CHARACTERISTICS display.

STR sysTl1SourceIdentifier

1.3.6.1.4.1.33.1.88

DisplayString

read-write

The source identifier (SID) is the server name used by TL1 to identify the server.

INT sysInitializeDelayParameter

1.3.6.1.4.1.33.1.89

INTEGER

read-write

Control to begin the system initialization process providing that at least one parameter server is current. Corresponds directly to the INITIALIZE DELAY PARAMETER command. In response to a get-request or get-next-request, the agent always returns 'ready' for this value.

1.3.6.1.4.1.33.4

1.3.6.1.4.1.33.5

1.3.6.1.4.1.33.6

1.3.6.1.4.1.33.6.1

INT basicLogLimit

1.3.6.1.4.1.33.6.1.1

INTEGER

read-write

Maximum allowed number of kilobytes for recording events. Corresponds directly to MANAGER LOG FILE SIZE and the value labeled 'Log File Size:' in the MANAGER CHARACTERISTICS display.

INT basicActiveLimit

1.3.6.1.4.1.33.6.1.2

INTEGER

read-write

Maximum allowed number of simultaneous service dialogs. Corresponds directly to MANAGER SIMULTANEOUS and the value labeled 'Maximum simultaneous requests:' in the MANAGER CHARACTERISTICS display.

GAU basicActiveNumber

1.3.6.1.4.1.33.6.1.3

Gauge

read-only

Number of active service dialogs. Corresponds indirectly to the list of active clients in the MANAGER STATUS display.

GAU basicClientNumber

1.3.6.1.4.1.33.6.1.4

Gauge

read-only

Number of defined clients. Corresponds indirectly to the list of defined clients in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays.

CTR basicOffersSent

1.3.6.1.4.1.33.6.1.5

Counter

read-only

Total number of service offers sent in response to client requests. Corresponds directly to the value labeled 'Total service offers sent:' in the MANAGER STATUS display.

GAU basicEventTotal

1.3.6.1.4.1.33.6.1.6

Gauge

read-only

Total number of events that have been written to the event log since it was last purged. This may be less than the number currently in the log. Corresponds directly to the value labeled 'Total Messages Logged:' in the MANAGER EVENTS display.

INT basicEventPurge

1.3.6.1.4.1.33.6.1.7

INTEGER

read-write

Control to cause emptying the event log. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting it to 'execute' causes the event log to immediately become empty. Corresponds directly to the PURGE MANAGER LOG FILE command.

activeTable

1.3.6.1.4.1.33.6.1.8

not-accessible

A list of active client dialog entries. The number of entries is given by basicActiveNumber.

activeEntry

1.3.6.1.4.1.33.6.1.8.1

not-accessible

Parameter values for an active client dialog entry.

ADR activeIdentificationType

1.3.6.1.4.1.33.6.1.8.1.1

AddressType

read-only

The type of identification value in activeIdentification. Corresponds indirectly to the value labeled 'EthernetAddress' in the MANAGER STATUS display.

OCT activeIdentification

1.3.6.1.4.1.33.6.1.8.1.2

OCTET STRING

read-only

Identification of the active partner. Corresponds directly to the value labeled 'EthernetAddress' in the MANAGER STATUS display.

INT activeFunction

1.3.6.1.4.1.33.6.1.8.1.3

INTEGER

read-only

The function the server is performing with the partner. Corresponds directly to the value labeled 'Function' in the MANAGER STATUS display.

INT activeSoftwareVersionType

1.3.6.1.4.1.33.6.1.8.1.4

INTEGER

read-only

If activeFunction is 'load', the software version being sent to the client, otherwise 'notApplicable'. Corresponds to the letter in the software version labeled 'Version' in the MANAGER STATUS display. alpha 'A': alpha test beta 'B': beta test production null: normal, production software special 'S': special, custom software diagnostic 'D': diagnostic, debug software

OCT activeSoftwareVersion

1.3.6.1.4.1.33.6.1.8.1.5

OCTET STRING

read-only

If activeFunction is 'load', the 4-byte software version being sent to the client, otherwise zero length. In order, the octets contain major version, minor version, ECO, and pre-release number. Corresponds to the numbers in the software version labeled 'Version' in the MANAGER STATUS display. For example, the version display for activeSoftwareVersionType 'production' and activeSoftwareVersion '2.2.0.0' is 'V2.2'. The version display for activeSoftwareVersionType 'beta' and activeSoftwareVersion '3.1.0.4' is 'V3.1B4'.

INT activeParameterVersion

1.3.6.1.4.1.33.6.1.8.1.6

INTEGER

read-only

If activeFunction is 'parameterStore', the parameter version being stored by the client, otherwise zero. Corresponds directly to the value labeled 'Version' in the MANAGER STATUS display.

INT activeCurrentSequence

1.3.6.1.4.1.33.6.1.8.1.7

INTEGER

read-only

The current dialog sequence number. Corresponds directly to the value labeled 'Seq' in the MANAGER STATUS display.

INT activeBytesRemaining

1.3.6.1.4.1.33.6.1.8.1.8

INTEGER

read-only

The number of bytes remaining to be transferred in the dialog. Corresponds directly to the value labeled 'Left' in the MANAGER STATUS display.

STR activeFile

1.3.6.1.4.1.33.6.1.8.1.9

DisplayString

read-only

The name of the file being used in the dialog. Corresponds directly to the value labeled 'File' in the MANAGER STATUS display.

DIA activeStatus

1.3.6.1.4.1.33.6.1.8.1.10

DialogStatus

read-only

The final status of the most recent attempt to get an image. Corresponds directly to the value labeled 'Get Status:' in the DEVICE STATUS display.

INT activeState

1.3.6.1.4.1.33.6.1.8.1.11

INTEGER

read-only

The dynamic state of an active attempt to get an image. Corresponds directly to the value labeled 'Get State:' in the DEVICE STATUS display.

clientTable

1.3.6.1.4.1.33.6.1.9

not-accessible

A list of client data base entries. The number of entries is given by basicClientNumber.

clientEntry

1.3.6.1.4.1.33.6.1.9.1

not-accessible

Parameter values for a client data base entry.

ADR clientIdentificationType

1.3.6.1.4.1.33.6.1.9.1.1

AddressType

read-only

The type of identification value in clientIdentification. Corresponds directly to MANAGER NODE, MANAGER GLOBAL, and MANAGER LOCAL, and the value labeled 'Ethernet Address' in the MANAGER NODE display or 'Ethernet Address', 'Device', and 'Global Devices' or 'Local Devices' in the MANAGER GLOBAL and LOCAL displays.

OCT clientIdentification

1.3.6.1.4.1.33.6.1.9.1.2

OCTET STRING

read-only

Identification of the client, either a hardware type or an Ethernet address, depending on clientIdentificationType. Corresponds directly to MANAGER NODE, MANAGER GLOBAL, and MANAGER LOCAL, and the value labeled 'Ethernet Address' in the MANAGER NODE display or 'Ethernet Address', 'Device', and 'Global Devices' or 'Local Devices' in the MANAGER GLOBAL and LOCAL displays.

INT clientEntryStatus

1.3.6.1.4.1.33.6.1.9.1.3

INTEGER

read-write

The status of the entry. Set to 'invalid' to remove the entry, which corresponds directly to the PURGE LOCAL, PURGE GLOBAL, and PURGE NODE commands. Actual removal of the entry is implementation specific.

STR clientName

1.3.6.1.4.1.33.6.1.9.1.4

DisplayString

read-write

A name that may be used to identify the client. Corresponds directly to the value labeled 'Name' in the MANAGER NODE display.

STR clientLoadFile

1.3.6.1.4.1.33.6.1.9.1.5

DisplayString

read-write

The file with the client's load image. Corresponds directly to the value labeled 'Load File' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays.

STR clientDiagnosticFile

1.3.6.1.4.1.33.6.1.9.1.6

DisplayString

read-write

The file with the client's diagnostic test image. Corresponds directly to the value labeled 'Diag File' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays.

INT clientLoadService

1.3.6.1.4.1.33.6.1.9.1.7

INTEGER

read-write

Control for allowing load service for the client. Corresponds directly to the value labeled 'Load' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays.

INT clientDumpService

1.3.6.1.4.1.33.6.1.9.1.8

INTEGER

read-write

Control for allowing dump service for the client. Corresponds directly to the value labeled 'Dump' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays.

namedTable

1.3.6.1.4.1.33.6.1.10

not-accessible

A list of named client data base entries. The number of entries is given by basicClientNumber.

namedEntry

1.3.6.1.4.1.33.6.1.10.1

not-accessible

Parameter values for a named client data base entry.

ADR namedIdentificationType

1.3.6.1.4.1.33.6.1.10.1.1

AddressType

read-only

The type of identification value in namedIdentification. Corresponds directly to MANAGER NODE, MANAGER GLOBAL, and MANAGER LOCAL, and the value labeled 'Ethernet Address' in the MANAGER NODE display or 'Ethernet Address', 'Device', and 'Global Devices' or 'Local Devices' in the MANAGER GLOBAL and LOCAL displays.

OCT namedIdentification

1.3.6.1.4.1.33.6.1.10.1.2

OCTET STRING

read-only

Identification of the client, either a hardware type or an Ethernet address, depending on namedIdentificationType. Corresponds directly to MANAGER NODE, MANAGER GLOBAL, and MANAGER LOCAL, and the value labeled 'Ethernet Address' in the MANAGER NODE display or 'Ethernet Address', 'Device', and 'Global Devices' or 'Local Devices' in the MANAGER GLOBAL and LOCAL displays.

INT namedEntryStatus

1.3.6.1.4.1.33.6.1.10.1.3

INTEGER

read-only

The status of the entry. Set to 'invalid' to remove the entry, which corresponds directly to the PURGE LOCAL, PURGE GLOBAL, and PURGE NODE commands. Actual removal of the entry is implementation specific.

STR namedName

1.3.6.1.4.1.33.6.1.10.1.4

DisplayString

read-only

A name that may be used to identify the client. Corresponds directly to the value labeled 'Name' in the MANAGER NODE display.

STR namedLoadFile

1.3.6.1.4.1.33.6.1.10.1.5

DisplayString

read-only

The file with the client's load image. Corresponds directly to the value labeled 'Load File' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays.

STR namedDiagnosticFile

1.3.6.1.4.1.33.6.1.10.1.6

DisplayString

read-only

The file with the client's diagnostic test image. Corresponds directly to the value labeled 'Diag File' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays.

INT namedLoadService

1.3.6.1.4.1.33.6.1.10.1.7

INTEGER

read-only

Control for allowing load service for the client. Corresponds directly to the value labeled 'Load' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays.

INT namedDumpService

1.3.6.1.4.1.33.6.1.10.1.8

INTEGER

read-only

Control for allowing dump service for the client. Corresponds directly to the value labeled 'Dump' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays.

xEventTable

1.3.6.1.4.1.33.6.1.11

not-accessible

A list of event entries. The number of entries is given by basicEventNumber.

xEventEntry

1.3.6.1.4.1.33.6.1.11.1

not-accessible

Parameter values for a event entry.

INT xEventIndex

1.3.6.1.4.1.33.6.1.11.1.1

INTEGER

read-only

In identification number for an event. The value 1 indicates the oldest event in the file, with subsequent numbers indicating sequential events. The event text for a given number may change as a circular event log wraps over its beginning. Corresponds directly to the relative position of an event in the MANAGER EVENTS display.

STR xEventText

1.3.6.1.4.1.33.6.1.11.1.2

DisplayString

read-only

The text of the event, including date, time and other information. Corresponds directly to the individual event text in the MANAGER EVENTS display.

INT basicDeviceNumber

1.3.6.1.4.1.33.6.1.12

INTEGER

read-only

The system's number of mass-storage devices.

deviceTable

1.3.6.1.4.1.33.6.1.13

not-accessible

A list of device entries. The number of entries is given by basicDeviceNumber.

deviceEntry

1.3.6.1.4.1.33.6.1.13.1

not-accessible

Parameter values for a device entry.

INT deviceIndex

1.3.6.1.4.1.33.6.1.13.1.1

INTEGER

read-only

In identification number for a device, in the range 1 to basicDeviceNumber

STR deviceName

1.3.6.1.4.1.33.6.1.13.1.2

DisplayString

read-only

A name by which the device is known in other displays, such as 'C1' or 'D2'.

STR deviceDescr

1.3.6.1.4.1.33.6.1.13.1.3

DisplayString

read-only

Details of the device type, including, for example, size, manufacturer, Flash versus RAM, and such. Corresponds directly to the value labeled 'Device Type: in the MANAGER DEVICE STATUS display.

INT deviceOperation

1.3.6.1.4.1.33.6.1.13.1.4

INTEGER

read-only

Current operational state of the device. Corresponds directly the value labeled 'Device Operation:' in the MANAGER DEVICE STATUS display.

INT deviceFormat

1.3.6.1.4.1.33.6.1.13.1.5

INTEGER

read-only

Formatting status of the device. Corresponds directly the presence of one of the value labels under the label 'Device Status:' in the MANAGER DEVICE STATUS display.

INT deviceProtection

1.3.6.1.4.1.33.6.1.13.1.6

INTEGER

read-only

Write-protect status of the device. Corresponds directly the presence of one of the value labels under the label 'Device Status:' in the MANAGER DEVICE STATUS display.

INT deviceFormatMedium

1.3.6.1.4.1.33.6.1.13.1.7

INTEGER

read-write

Control to cause formatting of the medium in the device. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting it to 'execute' causes the device to be formatted. Corresponds directly to the FORMAT DEVICE command.

INT deviceGetFile

1.3.6.1.4.1.33.6.1.13.1.8

INTEGER

read-write

Control to cause getting a file to the device from a remote host system. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting it to 'execute' causes the get to be attempted. Corresponds directly to the GET DEVICE command. When set to 'execute', the objects deviceGetFileHostIdentificationType, deviceGetFileHostIdentification, deviceGetFileName and deviceGetFileArea must be somewhere in the same set request message.

ADR deviceGetFileHostIdentificationType

1.3.6.1.4.1.33.6.1.13.1.9

AddressType

read-write

The type of identification value in deviceIdentification. Corresponds indirectly to ADDRESS in the GET DEVICE command. This object may not be set outside the context of setting deviceGetFile to 'execute'. In response to a get-request or get-next-request, the value of this object is 'undefined'.

OCT deviceGetFileHostIdentification

1.3.6.1.4.1.33.6.1.13.1.10

OCTET STRING

read-write

Identification of the host to get the file from, with type depending on deviceIdentificationType. Corresponds directly to ADDRESS in the GET DEVICE command. This object may not be set outside the context of setting deviceGetFile to 'execute'. In response to a get-request or get-next-request, the value of this object is zero length.

STR deviceGetFileName

1.3.6.1.4.1.33.6.1.13.1.11

DisplayString

read-write

The name of the file to get. Corresponds directly to LOAD FILE in the GET DEVICE command. This object may not be set outside the context of setting deviceGetFile to 'execute'. In response to a get-request or get-next-request, the value of this object is zero length.

INT deviceGetFileArea

1.3.6.1.4.1.33.6.1.13.1.12

INTEGER

read-write

The area number in which to put the file. Corresponds directly to AREA in the GET DEVICE command. If it is not relevant to the particular device, it is ignored. This object may not be set outside the context of setting deviceGetFile to 'execute'. In response to a get-request or get-next-request, the value of this object is zero.

INT deviceFormatOption

1.3.6.1.4.1.33.6.1.13.1.13

INTEGER

read-write

Formatting option to apply. Corresponds directly to the OPTION in the FORMAT DEVICE command. This object may not be set outside the context of setting deviceFormatMedium to 'execute'. In response to a get-request or get-next-request, the value of this object is zero.

INT deviceFormatRedundantParams

1.3.6.1.4.1.33.6.1.13.1.14

INTEGER

read-write

Control for creating redundant parameter storage areas when formatting. Corresponds directly to NONREDUNDANT in the FORMAT DEVICE command. This object may not be set outside the context of setting deviceFormatMedium to 'execute'. In response to a get-request or get-next-request, the value of this object is zero.

DIA devicePreviousStatus

1.3.6.1.4.1.33.6.1.13.1.15

DialogStatus

read-only

Result of the immediately previous concluded boot dialog. Corresponds directly to the value labeled 'Get File Previous Status:' in the SHOW CARD STATUS display.

xDump

1.3.6.1.4.1.33.6.2

INT dumpService

1.3.6.1.4.1.33.6.2.1

INTEGER

read-write

Control for allowing dump service for any client. Corresponds directly to DUMP and the value labeled 'Dump:' in the MANAGER CHARACTERISTICS display.

INT dumpDrive

1.3.6.1.4.1.33.6.2.2

INTEGER

read-write

Identification number of the disk drive where dumps are stored. Corresponds directly to DUMP DRIVE and the value labeled 'Dump Drive:' in the MANAGER CHARACTERISTICS display.

INT dumpMerit

1.3.6.1.4.1.33.6.2.3

INTEGER

read-write

Relative preference for this dump server over others. Corresponds directly to DUMP MERIT and the value labeled 'Dump Merit:' in the MANAGER CHARACTERISTICS display.

INT dumpSize

1.3.6.1.4.1.33.6.2.4

INTEGER

read-write

Type of dump file to keep. Corresponds directly to DUMP SIZE and the value labeled 'Dump Size:' in the MANAGER CHARACTERISTICS display.

CTR dumpCompleted

1.3.6.1.4.1.33.6.2.5

Counter

read-only

The number of dumps completed since system initialization. Corresponds directly to the value labeled 'Dump Operations Completed:' in the MANAGER STATUS display.

GAU dumpActive

1.3.6.1.4.1.33.6.2.6

Gauge

read-only

The number of dumps in progress. Corresponds directly to the value labeled 'Currently Dumping:' in the MANAGER STATUS display.

GAU dumpFileNumber

1.3.6.1.4.1.33.6.2.7

Gauge

read-only

The number of dump files currently stored. Corresponds directly to the value labeled 'Network dump files' and 'files' in the MANAGER FILES display.

dumpFileTable

1.3.6.1.4.1.33.6.2.8

not-accessible

A list of dump file entries. The number of entries is given by dumpFileNumber.

dumpFileEntry

1.3.6.1.4.1.33.6.2.8.1

not-accessible

Parameter values for a dump file entry.

ADR dumpFileIdentificationType

1.3.6.1.4.1.33.6.2.8.1.1

AddressType

read-only

The type of identification value in dumpFileIdentification. Corresponds indirectly to a file name part in the section labeled 'Network dump files' in the MANAGER FILES display.

OCT dumpFileIdentification

1.3.6.1.4.1.33.6.2.8.1.2

OCTET STRING

read-only

Identification of the dump file, an Ethernet address, as indicated by dumpFileIdentificationType. Corresponds indirectly to a file name part in the section labeled 'Network dump files' in the MANAGER FILES display.

INT dumpFileEntryStatus

1.3.6.1.4.1.33.6.2.8.1.3

INTEGER

read-write

The status of the entry. Set to 'invalid' to remove the entry, which corresponds indirectly to the PURGE MANAGER DUMP FILES command. Actual removal of the entry is implementation specific.

DAT dumpFileCreation

1.3.6.1.4.1.33.6.2.8.1.4

DateTime

read-only

The time the dump file was created. Corresponds directly to a date and time in the section labeled 'Network dump files' in the MANAGER FILES display.

INT dumpFileSize

1.3.6.1.4.1.33.6.2.8.1.5

INTEGER

read-only

The number of bytes stored in the dump file. Corresponds directly to the value labeled 'bytes' in the section labeled 'Network dump files' in the MANAGER FILES display.

xLoad

1.3.6.1.4.1.33.6.3

INT loadService

1.3.6.1.4.1.33.6.3.1

INTEGER

read-write

Control for allowing load service for any client. Corresponds directly to LOAD and the value labeled 'Load:' in the MANAGER CHARACTERISTICS display.

INT loadMerit

1.3.6.1.4.1.33.6.3.2

INTEGER

read-write

Relative preference for this load server over others. Corresponds directly to LOAD MERIT and the value labeled 'Load Merit:' in the MANAGER CHARACTERISTICS display.

CTR loadCompleted

1.3.6.1.4.1.33.6.3.3

Counter

read-only

The number of loads completed since system initialization. Corresponds directly to the value labeled 'Load Operations Completed:' in the MANAGER STATUS display.

GAU loadActive

1.3.6.1.4.1.33.6.3.4

Gauge

read-only

The number of loads in progress. Corresponds directly to the value labeled 'Currently Loading:' in the MANAGER STATUS display.

GAU loadFileNumber

1.3.6.1.4.1.33.6.3.5

Gauge

read-only

The number of load files currently stored. Corresponds directly to the value labeled 'Load image files' and 'files' in the MANAGER FILES display.

loadFileTable

1.3.6.1.4.1.33.6.3.6

not-accessible

A list of load file entries. The number of entries is given by loadFileNumber.

loadFileEntry

1.3.6.1.4.1.33.6.3.6.1

not-accessible

Parameter values for a load file entry.

STR loadFileName

1.3.6.1.4.1.33.6.3.6.1.1

DisplayString

read-only

The name of a load file. Corresponds directly to a file name part in the section labeled 'Load image files' in the MANAGER FILES display.

DAT loadFileCreation

1.3.6.1.4.1.33.6.3.6.1.2

DateTime

read-only

The time the load file was created. Corresponds directly to a date and time in the section labeled 'Load image files' in the MANAGER FILES display.

INT loadFileSize

1.3.6.1.4.1.33.6.3.6.1.3

INTEGER

read-only

The number of bytes stored in the load file. Corresponds directly to the value labeled 'bytes' in the section labeled 'Load image files' in the MANAGER FILES display.

INT loadFileSoftwareVersionType

1.3.6.1.4.1.33.6.3.6.1.4

INTEGER

read-only

The software version type of the image in the load file. Corresponds directly to a software version in the section labeled 'Load image files' in the MANAGER FILES display. alpha 'A': alpha test beta 'B': beta test production null: normal, production software special 'S': special, custom software

OCT loadFileSoftwareVersion

1.3.6.1.4.1.33.6.3.6.1.5

OCTET STRING

read-only

The software version of the image in the load file. Corresponds directly to a software version in the section labeled 'Load image files' in the MANAGER FILES display. For example, the version display for loadFileSoftwareVersionType 'production' and loadFileSoftwareVersion '2.2.0.0' is 'V2.2'. The version display for loadFileSoftwareVersionType 'beta' and loadFileSoftwareVersion '3.1.0.4' is 'V3.1B4'.

xParam

1.3.6.1.4.1.33.6.4

INT paramService

1.3.6.1.4.1.33.6.4.1

INTEGER

read-write

Control for allowing parameter storage service for any client. Corresponds directly to PARAMETER SERVICE and the value labeled 'Parameter Service:' in the MANAGER CHARACTERISTICS display.

INT paramDefaultService

1.3.6.1.4.1.33.6.4.2

INTEGER

read-write

Control for allowing default parameter loading service for any client. Corresponds directly to PARAMETER DEFAULT SERVICE and the value labeled 'Parameter Default Service:' in the MANAGER CHARACTERISTICS display.

INT paramDrive

1.3.6.1.4.1.33.6.4.3

INTEGER

read-write

Identification number of the disk drive where parameters are stored. Corresponds directly to PARAMETER DRIVE and the value labeled 'Parameter Drive:' in the MANAGER CHARACTERISTICS display.

GAU paramActive

1.3.6.1.4.1.33.6.4.4

Gauge

read-only

The number of params in progress. Corresponds directly to the value labeled 'Currently Paraming:' in the MANAGER STATUS display.

GAU paramStorageActive

1.3.6.1.4.1.33.6.4.5

Gauge

read-only

The number of parameter storage operations in progress. Corresponds directly to the value labeled 'Currently saving parameters:' in the MANAGER STATUS display.

GAU paramFileNumber

1.3.6.1.4.1.33.6.4.6

Gauge

read-only

The number of parameter files currently stored. Corresponds directly to the value labeled 'Parameter files' and 'files' in the MANAGER FILES display.

paramFileTable

1.3.6.1.4.1.33.6.4.7

not-accessible

A list of param file entries. The number of entries is given by paramFileNumber.

paramFileEntry

1.3.6.1.4.1.33.6.4.7.1

not-accessible

Parameter values for a param file entry.

ADR paramFileIdentificationType

1.3.6.1.4.1.33.6.4.7.1.1

AddressType

read-only

The type of identification value in paramFileIdentification. Corresponds indirectly to a file name part in the section labeled 'Parameter files' in the MANAGER FILES display.

OCT paramFileIdentification

1.3.6.1.4.1.33.6.4.7.1.2

OCTET STRING

read-only

Identification of the param file, an Ethernet address, as indicated by paramFileIdentificationType. Corresponds indirectly to a file name part in the section labeled 'Parameter files' in the MANAGER FILES display.

INT paramFileEntryStatus

1.3.6.1.4.1.33.6.4.7.1.3

INTEGER

read-write

The status of the entry. Set to 'invalid' to remove the entry, which corresponds indirectly to the PURGE MANAGER PARAMETER FILES command. Actual removal of the entry is implementation specific.

DAT paramFileWrite

1.3.6.1.4.1.33.6.4.7.1.4

DateTime

read-only

The time the parameter file was last written. Corresponds directly to a date and time in the section labeled 'Parameter files' in the MANAGER FILES display.

INT paramFileSize

1.3.6.1.4.1.33.6.4.7.1.5

INTEGER

read-only

The number of bytes stored in the param file. Corresponds directly to the value labeled 'bytes' in the section labeled 'Parameter files' in the MANAGER FILES display.

INT paramFileParameterVersion

1.3.6.1.4.1.33.6.4.7.1.6

INTEGER

read-only

The version number of the parameter data in the file. Corresponds directly to the value labeled 'ver' in the section labeled 'Parameter files' in the MANAGER FILES display.

xParamClient

1.3.6.1.4.1.33.7

STR paramClientLoaderName

1.3.6.1.4.1.33.7.1

DisplayString

read-only

The name of the system that most recently provided this system's stored parameters. Corresponds directly to the name value labeled 'Loaded From:' in the PARAMETER SERVER display.

ADR paramClientLoaderAddressType

1.3.6.1.4.1.33.7.2

AddressType

read-only

The type of network address contained in paramClientLoaderAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'local' means there is no address and parameters were loaded from local storage. 'ip' is an Internet IP address. 'ethernet' is an 802.3 MAC address. Corresponds indirectly to the address value labeled 'Loaded From:' in the PARAMETER SERVER display.

OCT paramClientLoaderAddress

1.3.6.1.4.1.33.7.3

OCTET STRING

read-only

The network address of the system that most recently provided this system's stored parameters. Corresponds directly to the address value labeled 'Loaded From:' in the PARAMETER SERVER display.

INT paramClientParameterVersion

1.3.6.1.4.1.33.7.4

INTEGER

read-write

The version number of the parameters as stored in this system's local memory. Corresponds directly to SERVER PARAMETER VERSION and the value labeled 'Last Update Version:' in the PARAMETER SERVER display.

DAT paramClientUpdateTime

1.3.6.1.4.1.33.7.5

DateTime

read-only

This system's local date and time when it last attempted to store parameters with a parameter server. Corresponds directly to the values labeled 'Last Update Date:' and 'Last Update Time:' in the PARAMETER SERVER display.

INT paramClientServerCheck

1.3.6.1.4.1.33.7.6

INTEGER

read-write

Control over whether or not this system is allowed to check for additional parameter servers. 'enabled' allows checking. Corresponds directly to PARAMETER SERVER CHECK and the presence of PARAMETER POLLING under the label 'Enabled Characteristics' in the SERVER CHARACTERISTICS display.

INT paramClientCheckInterval

1.3.6.1.4.1.33.7.7

INTEGER

read-write

The number of minutes between checks for additional parameter servers. Corresponds directly to PARAMETER SERVER CHECK TIMER and the value labeled 'Check Timer:' in the PARAMETER SERVER display.

INT paramClientCheckNow

1.3.6.1.4.1.33.7.8

INTEGER

read-write

Control to cause this system to immediately check for additional parameter servers. The agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting it to 'execute' causes a check to be started. Corresponds to the CHECK PARAMETER SERVER command.

INT paramClientServerLimit

1.3.6.1.4.1.33.7.9

INTEGER

read-write

The maximum number of parameter servers this system is allowed to remember at the same time. Corresponds directly to PARAMETER SERVER LIMIT and the value labeled 'Parameter Server Limit:' in the PARAMETER SERVER display.

INT paramClientRetransmitInterval

1.3.6.1.4.1.33.7.10

INTEGER

read-write

The number of minutes between this system's attempts to store new parameters with a server that has not acknowledged previous attempts. Corresponds directly to PARAMETER SERVER RETRANSMIT TIMER and the value labeled 'Retransmit Timer: in the PARAMETER SERVER display.

INT paramClientRetransmitLimit

1.3.6.1.4.1.33.7.11

INTEGER

read-write

The maximum number of attempts by this system to store new parameters with a server that has not acknowledged previous attempts. Corresponds directly to PARAMETER SERVER RETRANSMIT LIMIT and the value labeled 'Retransmit Limit:' in the PARAMETER SERVER display.

INT paramClientState

1.3.6.1.4.1.33.7.12

INTEGER

read-only

This system's state with regard to update attempts. The value meanings are: other none of the following idle no update in progress internal internal state of no meaning to manager hold holding to keep from updating too often retry waiting to retry after failure Corresponds directly to the value labeled 'Storage State:' in the PARAMETER SERVER display.

CTR paramClientProtocolErrors

1.3.6.1.4.1.33.7.13

Counter

read-only

The number of invalid parameter service protocol messages received by this system. Corresponds directly to the value labeled 'Bad Parameter Messages:' in the PARAMETER SERVER display.

CTR paramClientServerRejects

1.3.6.1.4.1.33.7.14

Counter

read-only

The number of parameter servers this system rejected due to exceeding paramClientServerLimit. Corresponds directly to the value labeled 'Rejected Servers:' in the PARAMETER SERVER display.

INT paramClientServerNumber

1.3.6.1.4.1.33.7.15

INTEGER

read-only

The number of parameter servers known to this system, indicating the number of entries in serverTable. Corresponds directly to the value labeled 'Parameter Servers:' in the PARAMETER SERVER display.

paramServerTable

1.3.6.1.4.1.33.7.16

not-accessible

A list of parameter server entries. The number of entries is given by the value of paramClientServerNumber.

paramServerEntry

1.3.6.1.4.1.33.7.16.1

not-accessible

Status and parameter values for a parameter server.

STR paramServerName

1.3.6.1.4.1.33.7.16.1.1

DisplayString

read-only

The server's name, unique within this system. Always 16 characters, null padded on the end. Corresponds directly to the name used to create the entry and the value labeled 'Name' in the PARAMETER SERVER display.

INT paramServerEntryStatus

1.3.6.1.4.1.33.7.16.1.2

INTEGER

read-write

The status of the entry. Set to 'invalid' to remove the entry, which corresponds directly to the CLEAR/PURGE PARAMETER SERVER command. Actual removal of the entry is implementation specific.

ADR paramServerAddressType

1.3.6.1.4.1.33.7.16.1.3

AddressType

read-write

The type of network address contained in paramServerAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'local' means there is no address and parameters were loaded from local storage. 'ip' is an Internet IP address. 'ethernet' is an 802.3 MAC address. Corresponds indirectly to the value labeled 'Address' in the PARAMETER SERVER display.

OCT paramServerAddress

1.3.6.1.4.1.33.7.16.1.4

OCTET STRING

read-write

The server's network address. Corresponds directly to the value labeled 'Address' in the PARAMETER SERVER display.

INT paramServerStoredVersion

1.3.6.1.4.1.33.7.16.1.5

INTEGER

read-only

Parameter version number currently stored at the server. Corresponds directly to the value labeled 'Version' in the PARAMETER SERVER display.

DAT paramServerStoredTime

1.3.6.1.4.1.33.7.16.1.6

DateTime

read-only

The server's date and time when it stored the parameters of version paramServerStoredVersion. Corresponds directly to the value labeled 'Date' in the PARAMETER SERVER display.

INT paramServerStoredStatus

1.3.6.1.4.1.33.7.16.1.7

INTEGER

read-only

Status of this system's parameters with respect to the server. Corresponds directly to the value labeled 'Status' in the PARAMETER SERVER display. The value meanings are: ahead server version newer than system's behind server version older than system's current up to date failed system no longer attempting update failing system trying to update but failing query attempting to determine version noMemCard no memory card in card drive unknown version not known

INT paramServerStoredFailure

1.3.6.1.4.1.33.7.16.1.8

INTEGER

read-only

When paramServerStoredStatus is 'failed' or 'failing', the reason for the most recent failure. Corresponds directly to the value labeled 'Reason' in the PARAMETER SERVER display. The value meanings are: other none of the following none no failure protocolOut invalid protocol message to server open file open error at server read file read error at server write file write error at server resource resource lack at server (e.g. disk) protocolIn invalid protocol message from server response no response from server close file close error at server delete file delete error at server rename file rename error at server fileData bad parameter data stored at server

STR paramClientPath

1.3.6.1.4.1.33.7.17

DisplayString

read-write

The directory path to the parameter file on all servers. Corresponds directly to PARAMETER SERVER PATH and the value labeled 'Path:' in the PARAMETER SERVER display.

INT paramClientChassisStorageState

1.3.6.1.4.1.33.7.18

INTEGER

read-only

The status of the current attempt to update parameters in local chassis storage. Corresponds directly to the value labeled 'Chassis Configuration:'.

INT paramClientTftpBroadcast

1.3.6.1.4.1.33.7.20

INTEGER

read-write

Control over whether or not this system is allowed to send out a TFTP read broadcast after sending a BOOTP broadcast during the Parameter Check Function. 'enabled' allows TFTP broadcast. Corresponds directly to the presence of PARAMETER TFTP BROADCAST under the label 'Enabled Characteristics' in the SERVER CHARACTERISTICS display.

INT paramClientWriteNow

1.3.6.1.4.1.33.7.21

INTEGER

read-write

Control to start saving parameters immediately in response to an execute. Corresponds directly to the WRITE PARAMETERS command. In response to a get-request or get-next-request, the agent always returns 'ready' for this value.

1.3.6.1.4.1.33.8

1.3.6.1.4.1.33.8.1

1.3.6.1.4.1.33.8.1.1

1.3.6.1.4.1.33.8.1.2

1.3.6.1.4.1.33.8.1.3

1.3.6.1.4.1.33.8.1.4

1.3.6.1.4.1.33.8.1.5

1.3.6.1.4.1.33.8.1.6

1.3.6.1.4.1.33.8.1.7

1.3.6.1.4.1.33.8.1.29

ir7520

1.3.6.1.4.1.33.8.1.30

ir9020

1.3.6.1.4.1.33.8.1.31

ir7020

1.3.6.1.4.1.33.8.1.32

irMgr0Rdc

1.3.6.1.4.1.33.8.1.124

ir9040

1.3.6.1.4.1.33.8.1.125

ir7040

1.3.6.1.4.1.33.8.1.126

irMgr0

1.3.6.1.4.1.33.8.1.127

irM800

1.3.6.1.4.1.33.8.1.128

irM700

1.3.6.1.4.1.33.8.1.129

ir8020

1.3.6.1.4.1.33.8.1.130

ir8040

1.3.6.1.4.1.33.8.1.131

ir7004

1.3.6.1.4.1.33.8.1.132

ir7008

1.3.6.1.4.1.33.8.1.133

ir8004

1.3.6.1.4.1.33.8.1.134

ir8008

1.3.6.1.4.1.33.8.1.135

irM900

1.3.6.1.4.1.33.8.1.136

irMGR0AC

1.3.6.1.4.1.33.8.1.137

irMGR0AC_IN

1.3.6.1.4.1.33.8.1.138

ir9004

1.3.6.1.4.1.33.8.1.139

ir9008

1.3.6.1.4.1.33.8.1.140

1.3.6.1.4.1.33.8.3

1.3.6.1.4.1.33.8.4

1.3.6.1.4.1.33.8.4.1

1.3.6.1.4.1.33.8.4.2

1.3.6.1.4.1.33.8.5

1.3.6.1.4.1.33.8.5.1

1.3.6.1.4.1.33.8.5.2

1.3.6.1.4.1.33.8.5.3

1.3.6.1.4.1.33.8.5.4

1.3.6.1.4.1.33.8.5.5

1.3.6.1.4.1.33.8.7

1.3.6.1.4.1.33.8.8

oem

1.3.6.1.4.1.33.8.9

netVantage

1.3.6.1.4.1.33.8.9.1

nv8516TT

1.3.6.1.4.1.33.8.9.1.1

nv8516FF

1.3.6.1.4.1.33.8.9.1.2

nbase

1.3.6.1.4.1.33.8.10

nbaseSwitch

1.3.6.1.4.1.33.8.10.1

nbaseSwitchN9

1.3.6.1.4.1.33.8.10.1.1

hubDeprecated

1.3.6.1.4.1.33.9

xInternet

1.3.6.1.4.1.33.10

xIp

1.3.6.1.4.1.33.10.1

IP ipGatewayAddress1

1.3.6.1.4.1.33.10.1.1

IpAddress

read-write

The internet address of the system's primary (first choice) gateway. A value of 0.0.0.0 indicates no address. Corresponds directly to SERVER INTERNET PRIMARY GATEWAY ADDRESS and the value labeled 'Primary Gateway Address:' in the SERVER INTERNET CHARACTERISTICS display.

IP ipGatewayAddress2

1.3.6.1.4.1.33.10.1.2

IpAddress

read-write

The internet address of the system's secondary (second choice) gateway. A value of 0.0.0.0 indicates no address. Corresponds directly to SERVER INTERNET SECONDARY GATEWAY ADDRESS and the value labeled 'Secondary Gateway Address:' in the SERVER INTERNET CHARACTERISTICS display.

INT ipAutoSubnetMask

1.3.6.1.4.1.33.10.1.3

INTEGER

read-write

A control for automatic determination of subnet mask. 'disabled' indicates the system must use the mask as configured by the network manager. 'enabled' indicates that the system is to automatically change the subnet mask when the system's Internet address is changed. Corresponds directly to SERVER INTERNET SUBNET MASK AUTOCONFIGURE and the value labeled 'Subnet Mask Autoconfigure:' in the SERVER INTERNET CHARACTERISTICS display.

INT ipReassembly

1.3.6.1.4.1.33.10.1.4

INTEGER

read-write

A control for reassembly of IP fragments. Corresponds directly to SERVER INTERNET REASSEMBLY and the value labeled 'Reassembly:' in the SERVER INTERNET CHARACTERISTICS display.

GAU ipFragmentsQueuedHigh

1.3.6.1.4.1.33.10.1.5

Gauge

read-only

Highest number of IP fragments queued.

GAU ipFragmentsQueuedCurrent

1.3.6.1.4.1.33.10.1.6

Gauge

read-only

Current number of IP fragments queued.

ipGenAdExtTable

1.3.6.1.4.1.33.10.1.7

not-accessible

Table of additional fields indexed by local IP address. An entry in this table is created or deleted when an entry in the MIB-II ipAddrTable is created or deleted. Although MIB-II specifies the ipAddrTable as read-only, iTouch implementations typically implement it as read-write to support modification of local IP addresses, network masks, and such.

ipGenAdExtEntry

1.3.6.1.4.1.33.10.1.7.1

not-accessible

A particular entry.

INT ipGenAdEntExtType

1.3.6.1.4.1.33.10.1.7.1.1

INTEGER

read-write

The way this local IP address is used, which may imply alternate, more intuitive ways to set it. primary general purpose for ordinary use rotary identificaton for rotary selection slip use for SLIP connection ppp use for PPP connection

IP ipGenAdEntExtBroadcast

1.3.6.1.4.1.33.10.1.7.1.2

IpAddress

read-write

Outgoing IP broadcast address associated with this local address. Value may be confined to logical compatibility with associated network mask.

INT ipARPTimeout

1.3.6.1.4.1.33.10.1.8

INTEGER

read-write

A control to set the length of time in minutes before an unused ARP entry is purged from the ARP table. The default is 60 minutes. Corresponds directly to the value labeled 'Translation Table TTL' in the SERVER INTERNET CHARACTERISTICS display.

INT ipGatewayPingInterval

1.3.6.1.4.1.33.10.1.9

INTEGER

read-write

A control to set the interval of time in seconds between successive pings to the primary gateway so as to determine its status. The default is 60 seconds. Corresponds directly to the value labeled 'Gateway Timeout' in the SERVER INTERNET CHARACTERISTICS display.

INT ipConfigureBootp

1.3.6.1.4.1.33.10.1.11

INTEGER

read-write

Control to use the BOOTP protocol upon startup to learn the unit's own internet address, subnet mask, primary and secondary gateway servers, domain name servers, time server and domain name.

xTcp

1.3.6.1.4.1.33.10.2

tcpPortTable

1.3.6.1.4.1.33.10.2.1

not-accessible

A list of TCP character port entries.

tcpPortEntry

1.3.6.1.4.1.33.10.2.1.1

not-accessible

TCP parameter values for a character port.

INT tcpPortIndex

1.3.6.1.4.1.33.10.2.1.1.1

INTEGER

read-only

An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.

INT tcpPortConnectByAddress

1.3.6.1.4.1.33.10.2.1.1.2

INTEGER

read-write

A control for requesting outgoing connection by internet address. 'disabled' indicates outgoing connections must be by Domain name. 'enabled' indicates that outgoing connections may be requested by internet address. Corresponds directly to PORT INTERNET CONNECTIONS and the presence of the label 'Internet Connections' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.

INT tcpPortWindowSize

1.3.6.1.4.1.33.10.2.1.1.3

INTEGER

read-write

Size of the TCP window for TCP connections on the port. Corresponds directly to PORT INTERNET TCP WINDOW SIZE and the value labeled 'TCP Window Size:' in the PORT ALTERNATE CHARACTERISTICS display.

INT tcpPortKeepAliveLimit

1.3.6.1.4.1.33.10.2.1.1.4

INTEGER

read-write

Number of minutes to maintain a TCP connection without response to keep-alive communication. A value of zero indicates no limit.

INT tcpResequencing

1.3.6.1.4.1.33.10.2.2

INTEGER

read-write

A control for keeping TCP messages received out-of-order to resequence them before using them. Corresponds directly to SERVER INTERNET TCP RESEQUENCING and the value labeled 'Resequencing:' in the SERVER INTERNET CHARACTERISTICS display.

GAU tcpQueuedSegs

1.3.6.1.4.1.33.10.2.3

Gauge

read-only

Number of TCP segments in the TCP receive queues. Corresponds directly to the value labeled 'TCP Packets Queued:' in the SERVER INTERNET COUNTERS display.

CTR tcpDiscardSegs

1.3.6.1.4.1.33.10.2.4

Counter

read-only

Number of TCP segments discarded due to exceeding the TCP receive queue limit. Corresponds directly to the value labeled 'TCP Packets Discarded:' in the SERVER INTERNET COUNTERS display.

INT tcpConnectTimer

1.3.6.1.4.1.33.10.2.5

INTEGER

read-write

Number of seconds to attempt a TCP connection without a response from the other side. The default value is 32 seconds. Corresponds directly to the SERVER INTERNET TCP CONNECT TIMER and the value labeled 'TCP Connect Timer' in the SERVER INTERNET CHARACTERISTICS display

INT tcpLocalPortBase

1.3.6.1.4.1.33.10.2.6

INTEGER

read-write

The value for port 0's tcp source port number.

INT tcpLocalPortIncrement

1.3.6.1.4.1.33.10.2.7

INTEGER

read-write

The value by which the tcp source port number increases for each port greater than port 0.

INT tcpRoutingTblSz

1.3.6.1.4.1.33.10.2.8

INTEGER

read-write

A control to set the size of the working routing table. The default is the current size of the table (64).

INT tcpDataSendDelay

1.3.6.1.4.1.33.10.2.9

INTEGER

read-write

A control to delay for the specified number of 10 millisecond ticks before sending the userdata string over the telnet connection.

INT tcpAckDelay

1.3.6.1.4.1.33.10.2.10

INTEGER

read-write

A Control to prevent sending a TCP ACK when we we change TCP window size.

INT tcpRetransmitMin

1.3.6.1.4.1.33.10.2.11

INTEGER

read-write

Number of milliseconds for the initial TCP Retransmit timer. This is the time at which a TCP session will initially retransmit unacknowledged packets.

xSnmpAgent

1.3.6.1.4.1.33.10.3

STR snmpAgentGetCommunity

1.3.6.1.4.1.33.10.3.1

DisplayString

read-write

The SNMP community name allowed to perform get-requests or get-next requests to this agent. Use of this value is case-insensitive. If the size is 0, the agent does not check the community name for these operations. Corresponds directly to SERVER INTERNET SNMP GET COMMUNITY and the value labeled 'Get Community:' in the SERVER INTERNET SNMP CHARACTERISTICS display.

STR snmpAgentSetCommunity

1.3.6.1.4.1.33.10.3.2

DisplayString

read-write

The SNMP community name allowed to perform set-requests to this agent. Use of this value is case-insensitive. If the size is 0, the agent does not check the community name for these operations. Corresponds directly to SERVER INTERNET SNMP SET COMMUNITY and the value labeled 'Set Community:' in the SERVER INTERNET SNMP CHARACTERISTICS display.

STR snmpAgentTrapCommunity

1.3.6.1.4.1.33.10.3.3

DisplayString

read-write

The SNMP community name sent in traps from this agent. Use of this value preserves case. Corresponds directly to SERVER INTERNET SNMP TRAP COMMUNITY and the value labeled 'Trap Community:' in the SERVER INTERNET SNMP CHARACTERISTICS display.

INT snmpAgentGetClientNumber

1.3.6.1.4.1.33.10.3.4

INTEGER

read-only

The number of client source addresses allowed to perform get-requests or get-next requests to this agent. If the value is 0, the agent does not check source address for these operations. Corresponds indirectly to the values labeled 'Get Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display.

INT snmpAgentSetClientNumber

1.3.6.1.4.1.33.10.3.5

INTEGER

read-only

The number of client source addresses allowed to perform set-requests to this agent. If the value is 0, the agent does not check source address for these operations. Corresponds indirectly to the values labeled 'Set Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display.

INT snmpAgentTrapClientNumber

1.3.6.1.4.1.33.10.3.6

INTEGER

read-only

The number of client source addresses to which this agent sends traps. If the value is 0, the agent does not perform this operation. Corresponds indirectly to the values labeled 'Trap Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display.

getClientTable

1.3.6.1.4.1.33.10.3.7

not-accessible

A list of get client entries. The number of entries is given by the value of snmpAgentGetClientNumber.

getClientEntry

1.3.6.1.4.1.33.10.3.7.1

not-accessible

Parameter values for a get client.

INT getClientIndex

1.3.6.1.4.1.33.10.3.7.1.1

INTEGER

read-only

Identification of a get client entry. Corresponds directly to the number in the label 'Get Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display.

INT getClientEntryStatus

1.3.6.1.4.1.33.10.3.7.1.2

INTEGER

read-write

Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table.

ADR getClientAddressType

1.3.6.1.4.1.33.10.3.7.1.3

AddressType

read-write

The type of network address contained in getClientAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'ip' is an Internet IP address. 'ethernet' is an 802.3 MAC address. If getClientAddressType does not accompany getClientAddress in a set request, the default type is 'ip'. Corresponds indirectly to the address value labeled 'Get Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display.

OCT getClientAddress

1.3.6.1.4.1.33.10.3.7.1.4

OCTET STRING

read-write

The client's network address. If getClientAddressType does not accompany getClientAddress in a set request, the default type is 'ip'. Corresponds directly to the address value labeled 'Get Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display.

setClientTable

1.3.6.1.4.1.33.10.3.8

not-accessible

A list of set client entries. The number of entries is given by the value of snmpAgentSetClientNumber.

setClientEntry

1.3.6.1.4.1.33.10.3.8.1

not-accessible

Parameter values for a set client.

INT setClientIndex

1.3.6.1.4.1.33.10.3.8.1.1

INTEGER

read-only

Identification of a set client entry. Corresponds directly to the number in the label 'Set Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display.

INT setClientEntryStatus

1.3.6.1.4.1.33.10.3.8.1.2

INTEGER

read-write

Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table.

ADR setClientAddressType

1.3.6.1.4.1.33.10.3.8.1.3

AddressType

read-write

The type of network address contained in setClientAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'ip' is an Internet IP address. 'ethernet' is an 802.3 MAC address. If setClientAddressType does not accompany setClientAddress in a set request, the default type is 'ip'. Corresponds indirectly to the address value labeled 'Set Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display.

OCT setClientAddress

1.3.6.1.4.1.33.10.3.8.1.4

OCTET STRING

read-write

The client's network address. When setting this value, the requester must supply setClientAddressType. If setClientAddressType does not accompany setClientAddress in a set request, the default type is 'ip'. Corresponds directly to the address value labeled 'Set Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display.

trapClientTable

1.3.6.1.4.1.33.10.3.9

not-accessible

A list of trap client entries. The number of entries is given by the value of snmpAgentTrapClientNumber.

trapClientEntry

1.3.6.1.4.1.33.10.3.9.1

not-accessible

Parameter values for a trap client.

INT trapClientIndex

1.3.6.1.4.1.33.10.3.9.1.1

INTEGER

read-only

Identification of a trap client entry. Corresponds directly to the number in the label 'Trap Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display.

INT trapClientEntryStatus

1.3.6.1.4.1.33.10.3.9.1.2

INTEGER

read-write

Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table.

ADR trapClientAddressType

1.3.6.1.4.1.33.10.3.9.1.3

AddressType

read-write

The type of network address contained in trapClientAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'ip' is an Internet IP address. 'ethernet' is an 802.3 MAC address. If trapClientAddressType does not accompany trapClientAddress in a set request, the default type is 'ip'. Corresponds indirectly to the address value labeled 'Trap Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display.

OCT trapClientAddress

1.3.6.1.4.1.33.10.3.9.1.4

OCTET STRING

read-write

The client's network address. When setting this value, the requester must supply trapClientAddressType. If trapClientAddressType does not accompany trapClientAddress in a set request, the default type is 'ip'. Corresponds directly to the address value labeled 'Trap Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display.

ADR snmpAgentAuthFailureAddress

1.3.6.1.4.1.33.10.3.10

TypedAddress

read-only

The address of the client to most recently fail SNMP authorization.

INT snmpAgentCommunityAuthenticationAlways

1.3.6.1.4.1.33.10.3.14

INTEGER

read-write

When enabled, indicates that community string authentication is done always for Gets, Sets, and GetNexts. When disabled, community string authentication is done once; but bypassed on subsequent Gets, Sets or GetNexts from the same address.

xDomainResolver

1.3.6.1.4.1.33.10.4

STR domainResolverSuffix

1.3.6.1.4.1.33.10.4.1

DisplayString

read-write

A partial domain name for the server to append to the end of an incomplete domain name provided by the user. Corresponds directly to SERVER INTERNET DEFAULT DOMAIN SUFFIX and the value labeled 'Domain Suffix:' in the SERVER INTERNET CHARACTERISTICS display.

IP domainResolverAddress1

1.3.6.1.4.1.33.10.4.2

IpAddress

read-write

The internet address of a Domain Name Server. The system can use one or two such addresses, without preference. A value of 0.0.0.0 indicates no address. Corresponds directly to SERVER INTERNET PRIMARY DOMAIN ADDRESS and the value labeled 'Primary Domain Address:' in the SERVER INTERNET CHARACTERISTICS display.

IP domainResolverAddress2

1.3.6.1.4.1.33.10.4.3

IpAddress

read-write

The internet address of a Domain Name Server. The system can use one or two such addresses, without preference. A value of 0.0.0.0 indicates no address. Corresponds directly to SERVER INTERNET SECONDARY DOMAIN ADDRESS and the value labeled 'Secondary Domain Address:' in the SERVER INTERNET CHARACTERISTICS display.

INT domainResolverTtl

1.3.6.1.4.1.33.10.4.4

INTEGER

read-write

The number of hours to keep received Domain information. Corresponds directly to SERVER INTERNET DOMAIN TTL and the value labeled ' Domain TTL:' in the SERVER INTERNET CHARACTERISTICS display.

INT domainResolverNameNumber

1.3.6.1.4.1.33.10.4.5

INTEGER

read-only

The number of Domain name mappings in this system's name cache.

nameTable

1.3.6.1.4.1.33.10.4.6

not-accessible

A list of Domain name entries. The number of entries is given by the value of domainResolverNameNumber.

nameEntry

1.3.6.1.4.1.33.10.4.6.1

not-accessible

Parameter values for a Domain name.

STR nameName

1.3.6.1.4.1.33.10.4.6.1.1

DisplayString

read-only

A fully qualified domain name. Corresponds directly to the value labeled 'Domain Name' in the DOMAIN display.

IP nameAddress

1.3.6.1.4.1.33.10.4.6.1.2

IpAddress

read-only

An Internet address corresponding to the Domain name. Corresponds directly to the value labeled 'Internet Address' in the DOMAIN display.

INT nameStatus

1.3.6.1.4.1.33.10.4.6.1.3

INTEGER

read-write

The status of the entry. Set to 'invalid' to remove the entry, which corresponds directly to the PURGE DOMAIN command. Actual removal of the entry is implementation specific.

INT nameSource

1.3.6.1.4.1.33.10.4.6.1.4

INTEGER

read-only

Source of this entry. The value meanings are: local defined by manager (LOCAL) primary obtained from a primary name server secondary obtained from a secondary name server rwho obtained from rwho Corresponds directly to the value labeled 'Source' in the DOMAIN display.

INT nameTtl

1.3.6.1.4.1.33.10.4.6.1.5

INTEGER

read-only

The number of minutes remaining in the entry's time to live. Corresponds directly to the value labeled 'TTL' in the DOMAIN display.

domainResolverPpp

1.3.6.1.4.1.33.10.4.7

IP domainResolverPppPrimaryServer

1.3.6.1.4.1.33.10.4.7.1

IpAddress

read-write

The internet address of the primary Domain Name Server to use in PPP IPCP negotiations. A value of 0.0.0.0 indicates no address. Corresponds directly to the value labeled 'Primary WINS Address:' in the SERVER INTERNET CHARACTERISTICS display.

IP domainResolverPppSecondaryServer

1.3.6.1.4.1.33.10.4.7.2

IpAddress

read-write

The internet address of the secondary Domain Name Server to use in PPP IPCP negotiations. A value of 0.0.0.0 indicates no address. Corresponds directly to the value labeled 'Secondary WINS Address:' in the SERVER INTERNET CHARACTERISTICS display.

xSlip

1.3.6.1.4.1.33.10.5

slipTable

1.3.6.1.4.1.33.10.5.1

not-accessible

A list of SLIP character port entries.

slipEntry

1.3.6.1.4.1.33.10.5.1.1

not-accessible

Parameter values for a SLIP port.

INT slipIndex

1.3.6.1.4.1.33.10.5.1.1.1

INTEGER

read-only

An index value that uniquely identifies a port that can run SLIP. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.

INT slipState

1.3.6.1.4.1.33.10.5.1.1.2

INTEGER

read-write

A control indicating whether SLIP is in operation on the port. Corresponds directly to PORT INTERNET SLIP and the value labeled 'SLIP' in the PORT CHARACTERISTICS display.

IP slipLocalAddress

1.3.6.1.4.1.33.10.5.1.1.3

IpAddress

read-write

The IP address assigned to the port. Corresponds directly to PORT SLIP ADDRESS and the value labeled 'SLIP Address:' in the PORT ALTERNATE CHARACTERISTICS display.

IP slipRemoteAddress

1.3.6.1.4.1.33.10.5.1.1.4

IpAddress

read-write

The IP address of the remote system attached to the port. Corresponds directly to PORT SLIP REMOTE and the value labeled 'Remote SLIP Address:' in the PORT ALTERNATE CHARACTERISTICS display.

IP slipMask

1.3.6.1.4.1.33.10.5.1.1.5

IpAddress

read-write

The subnet mask to use for SLIP operation on the port. Corresponds directly to PORT SLIP MASK and the value labeled 'SLIP Mask:' in the PORT ALTERNATE CHARACTERISTICS display.

CTR slipPortPacketsReceived

1.3.6.1.4.1.33.10.5.1.1.6

Counter

read-only

The number of SLIP packets received from the port. Corresponds directly to the value labeled 'Serial Packets Received:' in the PORT COUNTERS display.

CTR slipPortPacketsSent

1.3.6.1.4.1.33.10.5.1.1.7

Counter

read-only

The number of SLIP packets sent to the port. Corresponds directly to the value labeled 'Serial Packets Sent:' in the PORT COUNTERS display.

CTR slipPortPacketsDiscarded

1.3.6.1.4.1.33.10.5.1.1.8

Counter

read-only

The number of SLIP packets received from the port and discarded. Corresponds directly to the value labeled 'Serial Packets Discarded:' in the PORT COUNTERS display.

CTR slipPortPacketLengthErrors

1.3.6.1.4.1.33.10.5.1.1.9

Counter

read-only

The number of SLIP packets received from the port with an incorrect number of bytes. Corresponds directly to the value labeled 'Serial Packet Length Errors:' in the PORT COUNTERS display.

CTR slipPortPacketChecksumErrors

1.3.6.1.4.1.33.10.5.1.1.10

Counter

read-only

The number of SLIP packets received from the port with an invalid checksum. Corresponds directly to the value labeled 'Serial Packet Checksum Errors:' in the PORT COUNTERS display.

CTR slipNetworkPacketsReceived

1.3.6.1.4.1.33.10.5.1.1.11

Counter

read-only

The number of SLIP packets received from the network for this port. Corresponds directly to the value labeled 'Network Packets Received:' in the PORT COUNTERS display.

CTR slipNetworkPacketsSent

1.3.6.1.4.1.33.10.5.1.1.12

Counter

read-only

The number of SLIP packets sent to the network from this port. Corresponds directly to the value labeled 'Network Packets Sent:' in the PORT COUNTERS display.

CTR slipNetworkPacketsDiscarded

1.3.6.1.4.1.33.10.5.1.1.13

Counter

read-only

The number of SLIP packets received from the network for this port and discarded. Corresponds directly to the value labeled 'Network Packets Discarded:' in the PORT COUNTERS display.

xTelnet

1.3.6.1.4.1.33.10.6

telnetPortTable

1.3.6.1.4.1.33.10.6.1

not-accessible

A list of Telnet character port entries.

telnetPortEntry

1.3.6.1.4.1.33.10.6.1.1

not-accessible

Telnet parameter values for a character port.

INT telnetPortIndex

1.3.6.1.4.1.33.10.6.1.1.1

INTEGER

read-only

An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.

INT telnetPortIncomingTcpPort

1.3.6.1.4.1.33.10.6.1.1.2

INTEGER

read-write

The TCP port number offered for incoming connections to this character port. Corresponds directly to PORT TELNET REMOTE PORT and the value labeled 'Remote Port:' in the PORT TELNET CHARACTERISTICS display.

INT telnetPortOutgoingTcpPort

1.3.6.1.4.1.33.10.6.1.1.3

INTEGER

read-write

The TCP port number used by default for outgoing connections from this character port. Corresponds directly to PORT TELNET DEFAULT PORT and the value labeled 'Default Port:' in the PORT TELNET CHARACTERISTICS display.

INT telnetPortNewlineTranslation

1.3.6.1.4.1.33.10.6.1.1.4

INTEGER

read-write

Translation to apply to newline sequences (CR/NULL or CR/LF) received from the network, before sending the newline to the character port. The value indicates the sequence sent to the character port, with 'none' meaning no translation. The lfToCrLf value converts the newline character LF received from the network to a CR/LF. Corresponds directly to PORT TELNET NEWLINE FILTERING and the value labeled 'Newline Filtering:' in the PORT TELNET CHARACTERISTICS display.

STR telnetPortTerminalType

1.3.6.1.4.1.33.10.6.1.1.5

DisplayString

read-write

The terminal type character string for Telnet negotiations. Corresponds directly to PORT TELNET TERMINALTYPE and the value labeled 'TerminalType:' in the PORT TELNET CHARACTERISTICS display.

INT telnetPortEorReflection

1.3.6.1.4.1.33.10.6.1.1.6

INTEGER

read-write

Control for end-of-record handshake. Corresponds directly to PORT TELNET EOR REFLECTION and the value labeled 'EOR Reflection:' in the PORT TELNET CHARACTERISTICS display.

INT telnetPortBinaryMode

1.3.6.1.4.1.33.10.6.1.1.7

INTEGER

read-write

Control for operation of Telnet binary mode. The value meanings are: disabled refuse binary mode negotiation (INTERACTIVE) flowControl pass all but XON and XOFF (PASTHRU) complete pass all characters (PASSALL) Corresponds directly to PORT TELNET BINARY SESSION MODE and the value labeled 'Binary Session Mode:' in the PORT TELNET CHARACTERISTICS display.

INT telnetPortSendLocation

1.3.6.1.4.1.33.10.6.1.1.8

INTEGER

read-write

A control indicating whether a Telnet session will initiate negotiation of the Send Location option. Corresponds directly to the PORT TELNET LOCATION and the value labeled 'Location' in the PORT TELNET CHARACTERISTICS display.

STR telnetPortClientLocation

1.3.6.1.4.1.33.10.6.1.1.9

DisplayString

read-only

The location of the Telnet client port. Corresponds directly to the value labeled 'Telnet Client Location' in the SESSION display.

INT telnetPortPassiveSendLocation

1.3.6.1.4.1.33.10.6.1.1.10

INTEGER

read-write

A control indicating whether a Telnet session will passively respond to negotiation of the Send Location option. When disabled and telnetPortSendLocation is disabled, we will refuse to negotiate this option. When telnetPortSendLocation is enabled, it takes precedence. Corresponds directly to the value labeled 'Passive Location' in the PORT TELNET CHARACTERISTICS display.

telnetSerialPortTable

1.3.6.1.4.1.33.10.6.2

not-accessible

A list of Telnet character port entries.

telnetSerialPortEntry

1.3.6.1.4.1.33.10.6.2.1

not-accessible

Telnet parameter values for a character port.

INT telnetSerialPortIndex

1.3.6.1.4.1.33.10.6.2.1.1

INTEGER

read-only

An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.

INT telnetSerialPortOptionDisplay

1.3.6.1.4.1.33.10.6.2.1.2

INTEGER

read-write

Control for display of Telnet option negotiations. Corresponds directly to PORT TELNET OPTION DISPLAY and the value labeled 'Option Display:' in the PORT TELNET CHARACTERISTICS display.

INT telnetSerialPortCsiEscape

1.3.6.1.4.1.33.10.6.2.1.3

INTEGER

read-write

Control for translation of 8-bit escape sequences received from the character port to 7-bit equivalents before transmission to the remote partner. Corresponds directly to PORT TELNET CSI ESCAPE and the value labeled 'CSI Escape:' in the PORT TELNET CHARACTERISTICS display.

INT telnetSerialPortEchoMode

1.3.6.1.4.1.33.10.6.2.1.4

INTEGER

read-write

Control for who echoes characters that come from the character port. The value meanings are: local terminal server echoes locally remote remote system echoes disabled don't default to local echo passive don't initiate negotiating of echo character initiate remote echo and suppress go ahead line reject remote echo and reject suppress go ahead noecho will not initiate echo, but will negotiate it Corresponds directly to PORT TELNET ECHO MODE and the value labeled 'Echo Mode:' in the PORT TELNET CHARACTERISTICS display.

INT telnetSerialPortNewlineMode

1.3.6.1.4.1.33.10.6.2.1.5

INTEGER

read-write

Translation to apply to newline (carriage return) received from the character port, before sending the newline to the remote partner. The correspondence to command keywords is 'crNull' to NULL, 'crLF' to LINEFEED, and 'verbatim' to NOTHING (that is, no translation). Corresponds directly to PORT TELNET NEWLINE and the value labeled 'Newline:' in the PORT TELNET CHARACTERISTICS display.

INT telnetSerialPortTransmitMode

1.3.6.1.4.1.33.10.6.2.1.6

INTEGER

read-write

Criterion for deciding to send to the remote partner characters received from the character port. Corresponds directly to PORT TELNET TRANSMIT and the value labeled 'Transmit:' in the PORT TELNET CHARACTERISTICS display.

INT telnetSerialPortTransmitCharacterTimes

1.3.6.1.4.1.33.10.6.2.1.7

INTEGER

read-write

Number of character times to wait before transmitting when telnetSerialPortTransmitMode value is 'timed'. Corresponds directly to PORT TELNET TRANSMIT IDLETIME and the value labeled 'Transmit: Idle Time -' in the PORT TELNET CHARACTERISTICS display. This object may only be set to values 1..255. A value of 0 may be read if telnetSerialPortTransmitMode has a value of immediate or buffered

INT telnetSerialPortAbortOutputCharacter

1.3.6.1.4.1.33.10.6.2.1.8

INTEGER

read-write

Character input from the character port to cause aborting output. The value 0 indicates no character has this effect. Corresponds directly to PORT TELNET ABORT OUTPUT and the value labeled 'Abort Output Character:' in the PORT TELNET CHARACTERISTICS display.

INT telnetSerialPortAttentionCharacter

1.3.6.1.4.1.33.10.6.2.1.9

INTEGER

read-write

Character input from the character port to cause an attention notification to the remote partner. The value 0 indicates no character has this effect. Corresponds directly to PORT TELNET ATTENTION and the value labeled 'Attention Character:' in the PORT TELNET CHARACTERISTICS display.

INT telnetSerialPortEraseKeyCharacter

1.3.6.1.4.1.33.10.6.2.1.10

INTEGER

read-write

Character input from the character port to cause erasure of the previous input character. The value 0 indicates no character has this effect. Corresponds directly to PORT TELNET ERASE CHARACTER and the value labeled 'Erase Keystroke Character:' in the PORT TELNET CHARACTERISTICS display.

INT telnetSerialPortEraseLineCharacter

1.3.6.1.4.1.33.10.6.2.1.11

INTEGER

read-write

Character input from the character port to cause erasure of the previous line of input. The value 0 indicates no character has this effect. Corresponds directly to PORT TELNET ERASE LINE and the value labeled 'Erase Line Character:' in the PORT TELNET CHARACTERISTICS display.

INT telnetSerialPortInterruptCharacter

1.3.6.1.4.1.33.10.6.2.1.12

INTEGER

read-write

Character input from the character port to cause sending an interrupt notification to the remote partner. The value 0 indicates no character has this effect. Corresponds directly to PORT TELNET INTERRUPT and the value labeled 'Interrupt Character:' in the PORT TELNET CHARACTERISTICS display.

INT telnetSerialPortQueryCharacter

1.3.6.1.4.1.33.10.6.2.1.13

INTEGER

read-write

Character input from the character port to cause sending a status query to the remote partner. The value 0 indicates no character has this effect. Corresponds directly to PORT TELNET QUERY and the value labeled 'Query Character:' in the PORT TELNET CHARACTERISTICS display.

INT telnetSerialPortSynchronizeCharacter

1.3.6.1.4.1.33.10.6.2.1.14

INTEGER

read-write

Character input from the character port to cause sending a synchronization attempt to the remote partner. The value 0 indicates no character has this effect. Corresponds directly to PORT TELNET SYNCHRONIZE and the value labeled 'Synchronize Character:' in the PORT TELNET CHARACTERISTICS display.

INT telnetSerialPortUrgentBreak

1.3.6.1.4.1.33.10.6.2.1.15

INTEGER

read-write

Control for encoding breaks as Telnet urgent data. Corresponds directly to PORT TELNET URGENT BREAK and the value labeled 'Urgent Break:' in the PORT TELNET CHARACTERISTICS display.

INT telnetSerialPortRs491

1.3.6.1.4.1.33.10.6.2.1.16

INTEGER

read-write

A control to enable RS491 protocol processing on a port.

INT telnetSerialPortTransmitBufferedTime

1.3.6.1.4.1.33.10.6.2.1.17

INTEGER

read-write

Number of milliseconds to wait before transmitting when telnetSerialPortTransmitMode value is 'timed'. Corresponds directly to PORT TELNET TRANSMIT BUFFERED and the value labeled 'Transmit: Buff Time -' in the PORT TELNET CHARACTERISTICS display. This object may only be set to values 30..1500. A value of 0 may be read if telnetSerialPortTransmitMode has a value of immediate, idletime or controlchar

INT telnetSerialPortInterpretInterruptAsBreak

1.3.6.1.4.1.33.10.6.2.1.18

INTEGER

read-write

Control to interpret a Telnet Interrupt Character coming from the network as a Telnet Break Character, and to send a break out the serial port. This control is necessary for those devices which can send Telnet Interrupt but not Telnet Break. Corresponds directly to the presence of 'Telnet Interrupts Interpreted as Break' under the label 'Enabled Characteristics' in the PORT TELNET CHARACTERISTICS display.

INT telnetSerialPortPass8d

1.3.6.1.4.1.33.10.6.2.1.19

INTEGER

read-write

Control to pass unaltered the hexadecimal character '8D'. This control is added to ensure that this character will pass through directly in a session with 8-bit characters and parity odd or even. Corresponds directly to the presence of 'Telnet Pass 8D' under the label 'Enabled Characteristics' in the PORT TELNET CHARACTERISTICS display.

INT telnetSerialPortComControlClient

1.3.6.1.4.1.33.10.6.2.1.20

INTEGER

read-write

Control to begin Telnet comport control option negotiations as a client when a Telnet session is initiated. The comport control option enables a port to do outbound modem dialing on a Telnet connection. Corresponds to the value labeled 'Client:' in the PORT TELNET COMPORTCONTROL CHARACTERISTICS display.

INT telnetSerialPortComControlServer

1.3.6.1.4.1.33.10.6.2.1.21

INTEGER

read-write

Control to begin Telnet comport control option negotiations as a server when a Telnet session is initiated. Corresponds to the value labeled 'Server:' in the PORT TELNET COMPORTCONTROL CHARACTERISTICS display.

INT telnetSerialPortComControlServerRaisesDtr

1.3.6.1.4.1.33.10.6.2.1.22

INTEGER

read-write

Control for the client to request that the server raises its DTR signal on the port at the begining of the Telnet connection. Corresponds to the value labeled 'Server Raises DTR:' in the PORT TELNET COMPORTCONTROL CHARACTERISTICS display.

INT telnetSerialPortComControlClientTogglesDtr

1.3.6.1.4.1.33.10.6.2.1.23

INTEGER

read-write

Control to respond to the server's notification that its DCD has come high (or low) by raising (or lowering) DTR accordingly on the local port. Corresponds to the value labeled 'Client Toggles DTR:' in the PORT TELNET COMPORTCONTROL CHARACTERISTICS display.

xTn3270

1.3.6.1.4.1.33.10.7

INT tn3270DeviceNumber

1.3.6.1.4.1.33.10.7.1

INTEGER

read-only

The number of entries in the tn3270 Device table.

INT tn3270LanguageNumber

1.3.6.1.4.1.33.10.7.2

INTEGER

read-only

The number of entries in the tn3270 Language table.

INT tn3270PortKeymapStatus

1.3.6.1.4.1.33.10.7.3

INTEGER

read-write

Control for individual ports to create their own keymaps. Corresponds directly to SERVER TN3270 PORT KEYMAPS and the value labeled 'Port Keymaps:' in the SERVER TN3270 display.

tn3270DeviceTable

1.3.6.1.4.1.33.10.7.4

not-accessible

A list of tn3270 terminal device entries.

tn3270DeviceEntry

1.3.6.1.4.1.33.10.7.4.1

not-accessible

Tn3270 parameter values for a terminal device entry.

STR tn3270DeviceName

1.3.6.1.4.1.33.10.7.4.1.1

DisplayString

read-only

The name of a generic terminal device. Corresponds directly to SERVER TN3270 DEVICE and the value labeled 'Device Name:' in the SERVER TN3270 DEVICE display.

INT tn3270DeviceStatus

1.3.6.1.4.1.33.10.7.4.1.2

INTEGER

read-write

Status of this entry. Setting the value to 'invalid' invalidates the entry, corresponding directly to the PURGE SERVER TN3270 DEVICE command. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. If a new device table entry is added to the table, the agent will copy the VT100 table as a default. If one plans to add a new table entry, one should not remove the VT100 entry.

STR tn3270DeviceType

1.3.6.1.4.1.33.10.7.4.1.3

DisplayString

read-write

The terminal type character string for use when tn3270DeviceTn3270Type is insufficient. Corresponds directly to SERVER TN3270 DEVICE TERMINALTYPE and the value labeled 'TerminalType:' in the SERVER TN3270 DEVICE display.

INT tn3270Device3278Model

1.3.6.1.4.1.33.10.7.4.1.4

INTEGER

read-write

The 3278 model for the device. Corresponds directly to SERVER TN3270 DEVICE 3278Model and the value labeled '3278Model:' in the SERVER TN3270 DEVICE display.

INT tn3270DeviceKeyNumber

1.3.6.1.4.1.33.10.7.4.1.5

INTEGER

read-only

The number of Key table entries for this device.

INT tn3270DeviceScreenNumber

1.3.6.1.4.1.33.10.7.4.1.6

INTEGER

read-only

The number of Screen table entries for this device.

tn3270KeyTable

1.3.6.1.4.1.33.10.7.5

not-accessible

A list of tn3270 key entries by device.

tn3270KeyEntry

1.3.6.1.4.1.33.10.7.5.1

not-accessible

Tn3270 parameter values for a key entry for a device.

STR tn3270KeyDeviceName

1.3.6.1.4.1.33.10.7.5.1.1

DisplayString

read-only

The name of a generic terminal device as in tn3270DeviceName. Corresponds directly to SERVER TN3270 DEVICE and the value labeled 'Device Name:' in the SERVER TN3270 DEVICE display.

INT tn3270KeyName

1.3.6.1.4.1.33.10.7.5.1.2

INTEGER

read-only

The key name to which this entry applies. Corresponds directly to the key portion of SERVER TN3270 DEVICE KEYMAP and the value labeled '3270-key' in the 'Keymap:' section of the SERVER TN3270 DEVICE display.

INT tn3270KeyStatus

1.3.6.1.4.1.33.10.7.5.1.3

INTEGER

read-write

Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table.

OCT tn3270KeyCharacterSequence

1.3.6.1.4.1.33.10.7.5.1.4

OCTET STRING

read-write

The ASCII character sequence for the key. Corresponds directly to the escape-sequence portion of SERVER TN3270 DEVICE KEYMAP and the value labeled 'KeyCode' in the 'Keymap:' section of the SERVER TN3270 DEVICE display.

STR tn3270KeyDescription

1.3.6.1.4.1.33.10.7.5.1.5

DisplayString

read-write

Descriptive text for the key. Corresponds directly to the description portion of SERVER TN3270 DEVICE KEYMAP and the value labeled 'Description' in the SERVER TN3270 DEVICE display.

tn3270ScreenTable

1.3.6.1.4.1.33.10.7.6

not-accessible

A list of tn3270 screen action entries by device.

tn3270ScreenEntry

1.3.6.1.4.1.33.10.7.6.1

not-accessible

Tn3270 parameter values for a screen action entry for a device.

STR tn3270ScreenDeviceName

1.3.6.1.4.1.33.10.7.6.1.1

DisplayString

read-only

The name of a generic terminal device as in tn3270DeviceName. Corresponds directly to SERVER TN3270 DEVICE and the value labeled 'Device Name:' in the SERVER TN3270 DEVICE display.

INT tn3270ScreenActionName

1.3.6.1.4.1.33.10.7.6.1.2

INTEGER

read-only

The screen action to which this entry applies. Corresponds directly to the action portion of SERVER TN3270 DEVICE SCREENMAP and the value labeled 'Terminal Function' in the 'Screenmap: section of the SERVER TN3270 DEVICE display.

INT tn3270ScreenStatus

1.3.6.1.4.1.33.10.7.6.1.3

INTEGER

read-write

Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table.

OCT tn3270ScreenCharacterSequence

1.3.6.1.4.1.33.10.7.6.1.4

OCTET STRING

read-write

The ASCII character sequence for the screen action. Some actions may have a lesser length limit. Corresponds directly to the escape-sequence portion of SERVER TN3270 DEVICE SCREENMAP and the value labeled 'HexCode' in the 'Screenmap: section of the SERVER TN3270 DEVICE display.

tn3270LanguageTable

1.3.6.1.4.1.33.10.7.7

not-accessible

A list of tn3270 language entries.

tn3270LanguageEntry

1.3.6.1.4.1.33.10.7.7.1

not-accessible

Tn3270 parameter values for a language entry.

STR tn3270LanguageName

1.3.6.1.4.1.33.10.7.7.1.1

DisplayString

read-only

The name of language for character translation tables. Corresponds directly to SERVER TN3270 LANGUAGE and the value labeled 'Language Name:' in the SERVER LANGUAGE display.

INT tn3270LanguageStatus

1.3.6.1.4.1.33.10.7.7.1.2

INTEGER

read-write

Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. If a new device table entry is added to the table, the agent will copy the USENGLSH table as the default.

eToALanguageTable

1.3.6.1.4.1.33.10.7.8

not-accessible

A list of language EBCDIC to ASCII conversion entries.

eToALanguageEntry

1.3.6.1.4.1.33.10.7.8.1

not-accessible

EBCDIC to ASCII parameter values for a language entry.

STR eToALanguageName

1.3.6.1.4.1.33.10.7.8.1.1

DisplayString

read-only

The name of language from the language table.

INT eToAOffset

1.3.6.1.4.1.33.10.7.8.1.2

INTEGER

read-only

EBCDIC character offset plus one, that is, the value 1 corresponds to an operational offset of 0. Corresponds directly to the offset portion of SERVER TN3270 LANGUAGE and the hexadecimal labels around the conversion table labeled 'EBCDIC to ASCII' in the SERVER LANGUAGE display.

INT eToAValue

1.3.6.1.4.1.33.10.7.8.1.3

INTEGER

read-write

ASCII character value for the EBCDIC offset. Corresponds directly to the value portion of SERVER TN3270 LANGUAGE and the values in the conversion table labeled 'EBCDIC to ASCII' in the SERVER LANGUAGE display.

aToELanguageTable

1.3.6.1.4.1.33.10.7.9

not-accessible

A list of language ASCII to EBCDIC conversion entries.

aToELanguageEntry

1.3.6.1.4.1.33.10.7.9.1

not-accessible

ASCII to EBCDIC parameter values for a language entry.

STR aToELanguageName

1.3.6.1.4.1.33.10.7.9.1.1

DisplayString

read-only

The name of language from the language table.

INT aToEOffset

1.3.6.1.4.1.33.10.7.9.1.2

INTEGER

read-only

ASCII character offset plus one, that is, the value 1 corresponds to an operational offset of 0. Corresponds directly to the offset portion of SERVER TN3270 LANGUAGE and the hexadecimal labels around the conversion table labeled 'ASCII to EBCDIC' in the SERVER LANGUAGE display.

INT aToEValue

1.3.6.1.4.1.33.10.7.9.1.3

INTEGER

read-write

EBCDIC character value for the ASCII offset. Corresponds directly to the value portion of SERVER TN3270 LANGUAGE and the values in the conversion table labeled 'ASCII to EBCDIC' in the SERVER LANGUAGE display.

tn3270PortTable

1.3.6.1.4.1.33.10.7.10

not-accessible

A list of tn3270 character port entries.

tn3270PortEntry

1.3.6.1.4.1.33.10.7.10.1

not-accessible

Parameter values for a tn3270 port.

INT tn3270PortIndex

1.3.6.1.4.1.33.10.7.10.1.1

INTEGER

read-only

An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.

STR tn3270PortDeviceName

1.3.6.1.4.1.33.10.7.10.1.2

DisplayString

read-write

The name of a generic terminal device from the tn3270 device table. Corresponds directly to PORT TELNET TN3270 DEVICE and the value labeled 'Tn3270 Device:' in the PORT TELNET display.

STR tn3270PortLanguageName

1.3.6.1.4.1.33.10.7.10.1.3

DisplayString

read-write

The name of language from the tn3270 language table. Corresponds directly to PORT TELNET TN3270 LANGUAGE and the value labeled 'Tn3270 Language:' in the PORT TELNET display.

INT tn3270PortExtendedAttributes

1.3.6.1.4.1.33.10.7.10.1.4

INTEGER

read-write

A control indicating that certain 3270 extended attributes are supported on the port. Corresponds directly to PORT TELNET TN3270 XTDATTRS and the label 'Tn3270 XtdAttrs' following the label 'Enabled Characteristics' in the PORT TELNET display.

INT tn3270PortEorNegotiation

1.3.6.1.4.1.33.10.7.10.1.5

INTEGER

read-write

A control for negotiation of the Telnet EOR option when establishing a tn3270 session on the port. Corresponds directly to PORT TELNET TN3270 EOR and the label 'Tn3270 EOR' following the label 'Enabled Characteristics' in the PORT TELNET display.

INT tn3270PortErrorLock

1.3.6.1.4.1.33.10.7.10.1.6

INTEGER

read-write

A control for requiring use the RESET key when the host reports an error during a tn3270 session on the port. Corresponds directly to PORT TELNET TN3270 ERRORLOCK and the label 'Tn3270 ErrorLock' following the label 'Enabled Characteristics' in the PORT TELNET display.

INT tn3270PortPrinterPort

1.3.6.1.4.1.33.10.7.10.1.7

INTEGER

read-write

The port number of the tn3270 printer. Corresponds directly to PORT TELNET TN3270 PRINTER and the value labeled 'Tn3270 Printer:' in the PORT TELNET display.

INT tn3270PortOutgoingTcpPort

1.3.6.1.4.1.33.10.7.10.1.8

INTEGER

read-write

The TCP port which is used for a TN3270 session when connecting to a remote host from this serial port. Corresponds directly to the value labeled 'Tn3270 Default Port:' in the PORT TELNET CHARACTERISTICS display.

INT tn3270PortSpaceInsert

1.3.6.1.4.1.33.10.7.10.1.9

INTEGER

read-write

Control to allow insert mode within a space filled field, and write characters over EBCDIC spaces. Corresponds directly to the presence of 'Tn3270 Space_Insert' under the label 'Enabled Characteristics' in the PORT TELNET CHARACTERISTICS display.

INT tn3270PortTypeAhead

1.3.6.1.4.1.33.10.7.10.1.10

INTEGER

read-write

Control to permit typing ahead in a tn3270 session prior to receiving a response from the host for the previous command entered. Corresponds directly to the presence of 'Tn3270 TypeAhead' under the label 'Enabled Characteristics' in the PORT TELNET CHARACTERISTICS display.

INT tn3270PrefixKeyMap

1.3.6.1.4.1.33.10.7.10.1.11

INTEGER

read-write

Control to prepend a prefix function to another function key. When the operator hits the key the prepended function(s) and then the main function for the key are transmitted to the host. Corresponds directly to the presence of 'Tn3270 PrefixKeyMap' under the label 'Enabled Characteristics' in the PORT TELNET CHARACTERISTICS display.

INT tn3270PortScanner

1.3.6.1.4.1.33.10.7.10.1.12

INTEGER

read-write

Indicates that this is a tn3270 scanner port. Corresponds directly to the presence of 'Tn3270 SCANNER' under the label 'Enabled Characteristics' in the PORT TELNET CHARACTERISTICS display.

xKerberos

1.3.6.1.4.1.33.10.8

INT kerbStatus

1.3.6.1.4.1.33.10.8.1

INTEGER

read-write

A control indicating the level of Kerberos operation on the system. Corresponds directly to SERVER KERBEROS STATUS and the value labeled 'Kerberos Security:' in the SERVER KERBEROS display.

STR kerbRealm

1.3.6.1.4.1.33.10.8.2

DisplayString

read-write

The Kerberos realm with which the kerbServerName1 and kerbServerName2 are associated. Corresponds directly to SERVER KERBEROS REALM and the value labeled 'Kerberos Realm:' in the SERVER KERBEROS display.

INT kerbQueryLimit

1.3.6.1.4.1.33.10.8.3

INTEGER

read-write

The maximum number of attempts the system can make when trying to verify a Kerberos ID. Corresponds directly to SERVER KERBEROS QUERY LIMIT and the value labeled 'Kerberos Query Limit:' in the SERVER KERBEROS display.

STR kerbMasterName

1.3.6.1.4.1.33.10.8.4

DisplayString

read-write

The Domain name of the Kerberos master host system, which holds the Kerberos database. Corresponds directly to SERVER KERBEROS MASTER and the value labeled 'Kerberos Master:' in the SERVER KERBEROS display.

STR kerbServerName1

1.3.6.1.4.1.33.10.8.5

DisplayString

read-write

The Domain name of the first Kerberos server to try when the system verifys a Kerberos ID. Corresponds directly to SERVER KERBEROS PRIMARY SERVER and the value labeled 'Kerberos Primary Server:' in the SERVER KERBEROS display.

STR kerbServerName2

1.3.6.1.4.1.33.10.8.6

DisplayString

read-write

The Domain name of the Kerberos server to try when the system verifys a Kerberos ID and cannot reach the Kerberos primary server. Corresponds directly to SERVER KERBEROS SECONDARY SERVER and the value labeled 'Kerberos Secondary Server:' in the SERVER KERBEROS display.

CTR kerbInsecureLogins

1.3.6.1.4.1.33.10.8.7

Counter

read-only

The number of user logins on ports for which Kerberos user verification is not enabled. Corresponds directly to the value labeled 'Logins without Kerberos:' in the SERVER KERBEROS display.

CTR kerbSecureLogins

1.3.6.1.4.1.33.10.8.8

Counter

read-only

The number of successful user logins on ports for which Kerberos user verification is enabled. Corresponds directly to the value labeled 'Successful Logins:' in the SERVER KERBEROS display.

CTR kerbSecureLoginsFailed

1.3.6.1.4.1.33.10.8.9

Counter

read-only

The number of verification failures due to incorrect ID or password for attempted user logins on ports for which Kerberos user verification is enabled. Corresponds directly to the value labeled 'Unsuccessful Logins:' in the SERVER KERBEROS display.

CTR kerbPasswordChangeFailed

1.3.6.1.4.1.33.10.8.10

Counter

read-only

The number of user failures to change their Kerberos password due to invalid old password or new password verification. Corresponds directly to the value labeled 'Password Change Failures:' in the SERVER KERBEROS display.

INT kerbError

1.3.6.1.4.1.33.10.8.11

INTEGER

read-only

The error number of the most recent Kerberos-related failure. Corresponds directly to the value labeled 'Last Kerberos Error:' in the SERVER KERBEROS display. For a list of error numbers and their meanings, consult relevant iTouch or Kerberos documentation.

DAT kerbErrorTime

1.3.6.1.4.1.33.10.8.12

DateTime

read-only

The date and time that kerbError was last updated. Corresponds directly to the value labeled 'Occurred:' in the SERVER KERBEROS display.

CTR kerbMasterAccess

1.3.6.1.4.1.33.10.8.13

Counter

read-only

The number of times the system successfully accessed the Kerberos master host. Corresponds directly to the value labeled 'Attempts to access:', 'Master', and 'Successful:' in the SERVER KERBEROS display.

CTR kerbMasterAccessFailed

1.3.6.1.4.1.33.10.8.14

Counter

read-only

The number of times the system failed access to the Kerberos master host. Corresponds directly to the value labeled 'Attempts to access:', 'Master', and 'Unsuccessful:' in the SERVER KERBEROS display.

CTR kerbServerAccess1

1.3.6.1.4.1.33.10.8.15

Counter

read-only

The number of times the system successfully accessed the Kerberos primary server. Corresponds directly to the value labeled 'Attempts to access:', 'Server1', and 'Successful:' in the SERVER KERBEROS display.

CTR kerbServerAccessFailed1

1.3.6.1.4.1.33.10.8.16

Counter

read-only

The number of times the system failed access to the Kerberos primary server. Corresponds directly to the value labeled 'Attempts to access:', 'Server1', and 'Unsuccessful:' in the SERVER KERBEROS display.

CTR kerbServerAccess2

1.3.6.1.4.1.33.10.8.17

Counter

read-only

The number of times the system successfully accessed the Kerberos secondary server. Corresponds directly to the value labeled 'Attempts to access:', 'Server2', and 'Successful:' in the SERVER KERBEROS display.

CTR kerbServerAccessFailed2

1.3.6.1.4.1.33.10.8.18

Counter

read-only

The number of times the system failed access to the Kerberos secondary server. Corresponds directly to the value labeled 'Attempts to access:', 'Server2', and 'Unsuccessful:' in the SERVER KERBEROS display.

kerbPortTable

1.3.6.1.4.1.33.10.8.19

not-accessible

A list of Kerberos character port entries.

kerbPortEntry

1.3.6.1.4.1.33.10.8.19.1

not-accessible

Parameter values for a Kerberos port.

INT kerbPortIndex

1.3.6.1.4.1.33.10.8.19.1.1

INTEGER

read-only

An index value that uniquely identifies a port could relate to Kerberos. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.

INT kerbPortStatus

1.3.6.1.4.1.33.10.8.19.1.2

INTEGER

read-write

A control indicating the level of Kerberos operation on the port. Corresponds directly to PORT KERBEROS and the value 'Kerberos' following the label 'Enabled Characteristics' in the PORT CHARACTERISTICS display.

INT kerbServerPort

1.3.6.1.4.1.33.10.8.20

INTEGER

read-write

The UDP port number on the Kerberos server where Kerberos messages are sent.

xPortSecurity

1.3.6.1.4.1.33.10.9

INT psEntryNumber

1.3.6.1.4.1.33.10.9.1

INTEGER

read-only

The number of security entries in this system's port security table with psEntryStatus of 'valid'.

INT psEntryNumberLimit

1.3.6.1.4.1.33.10.9.2

INTEGER

read-only

The maximum number of security entries in this system's port security table.

INT psEntryInvalidIndex

1.3.6.1.4.1.33.10.9.3

INTEGER

read-only

A value of psEntryIndex for an entry that has psEntryStatus of 'invalid'. A management station may choose this value when adding a new entry. Collisions between independent management stations simultaneously using the same number are beyond the scope of this document.

psPortTable

1.3.6.1.4.1.33.10.9.4

not-accessible

A list of port security character port entries.

psPortEntry

1.3.6.1.4.1.33.10.9.4.1

not-accessible

Port security parameter values for a port.

INT psPortIndex

1.3.6.1.4.1.33.10.9.4.1.1

INTEGER

read-only

An index value that uniquely identifies a port for security purposes. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.

INT psPortDefaultInboundAccess

1.3.6.1.4.1.33.10.9.4.1.2

INTEGER

read-write

The default access to the port for incoming TCP connections. Corresponds directly to PORT INTERNET SECURITY DEFAULT INBOUND and the value labeled 'Inbound Default:' in the PORT INTERNET SECURITY display.

INT psPortDefaultOutboundAccess

1.3.6.1.4.1.33.10.9.4.1.3

INTEGER

read-write

The default access to the port for outgoing TCP connections. Corresponds directly to PORT INTERNET SECURITY DEFAULT OUTBOUND and the value labeled 'Outbound Default:' in the PORT INTERNET SECURITY display.

INT psClrInternetSecurity

1.3.6.1.4.1.33.10.9.4.1.4

INTEGER

read-write

A control for if the internet security entries for this port will be cleared upon port logout. The default is disabled.

psTable

1.3.6.1.4.1.33.10.9.5

not-accessible

A list of port security entries.

psEntry

1.3.6.1.4.1.33.10.9.5.1

not-accessible

Port security parameter values for an entry for a port.

INT psEntryIndex

1.3.6.1.4.1.33.10.9.5.1.1

INTEGER

read-only

A small, numeric distinguisher for port security entries. When adding a new entry, the client should specify an unused value, such as psEntryInvalidIndex. Corresponds directly to the value labeled 'Entry' in the SERVER INTERNET SECURITY display.

INT psEntryStatus

1.3.6.1.4.1.33.10.9.5.1.2

INTEGER

read-write

Status of this entry. Setting the value to 'invalid' invalidates the entry, corresponding directly to the CLEAR INTERNET SECURITY command. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Setting this object to 'valid' has no effect. When creating a new instance, one must set psEntryAddress, psEntryMask, psEntryAccess, psEntryDirection and psEntryPortList for the new instance in the same physical set request. Furthermore, if one wishes to change an entry, one must first delete it and then add it with its new values.

IP psEntryAddress

1.3.6.1.4.1.33.10.9.5.1.3

IpAddress

read-write

The IP address to which the entry pertains. Corresponds directly to the PORT INTERNET SECURITY internet address and the value labeled 'Internet Address' in the SERVER INTERNET SECURITY display.

IP psEntryMask

1.3.6.1.4.1.33.10.9.5.1.4

IpAddress

read-write

The mask applied to psEntryAddress when making a security check based on this entry. Corresponds directly to PORT INTERNET SECURITY MASK and the value labeled 'Security Mask' in the SERVER INTERNET SECURITY display.

INT psEntryAccess

1.3.6.1.4.1.33.10.9.5.1.5

INTEGER

read-write

The access to the port for TCP connections when making a security check based on this entry. Corresponds directly to PORT INTERNET SECURITY ALLOW or DENY and the value labeled 'Access' in the SERVER INTERNET SECURITY display.

INT psEntryDirection

1.3.6.1.4.1.33.10.9.5.1.6

INTEGER

read-write

The direction of TCP connections to which this entry applies. Corresponds directly to PORT INTERNET SECURITY INBOUND or OUTBOUND and the value labeled 'Direction' in the SERVER INTERNET SECURITY display.

OCT psEntryPortMap

1.3.6.1.4.1.33.10.9.5.1.7

OCTET STRING

read-write

The list of character ports to which this entry applies. The OCTET STRING contains a bitmap, with one bit for each port, and enough octets for all the ports on the system. Port numbers are as defined for charPortIndex in the Proposed Standard Internet Character MIB. Corresponding bit numbers start with 1 as the high-order bit of the first octet. Corresponds directly to PORT INTERNET SECURITY and the value labeled 'Ports' in the SERVER INTERNET SECURITY display.

xXremote

1.3.6.1.4.1.33.10.10

STR xremoteServerName1

1.3.6.1.4.1.33.10.10.1

DisplayString

read-write

The Domain name of the first XREMOTE font server to try for downloading fonts. Corresponds directly to SERVER XREMOTE PRIMARY SERVER and the value labeled 'Xremote Primary Font Server:' in the SERVER XREMOTE display.

STR xremoteServerName2

1.3.6.1.4.1.33.10.10.2

DisplayString

read-write

The Domain name of the XREMOTE font server to try for downloading fonts and the primary font server does not respond. Corresponds directly to SERVER XREMOTE SECONDARY SERVER and the value labeled 'Xremote Secondary Font Server:' in the SERVER XREMOTE display.

CTR xremoteServerAccess1

1.3.6.1.4.1.33.10.10.3

Counter

read-only

The number of times the system successfully accessed the XREMOTE primary font server. Corresponds directly to the value labeled 'Attempts to access:', 'Server1', and 'Successful:' in the SERVER XREMOTE display.

CTR xremoteServerAccessFailed1

1.3.6.1.4.1.33.10.10.4

Counter

read-only

The number of times the system failed access to the XREMOTE primary font server. Corresponds directly to the value labeled 'Attempts to access:', 'Server1', and 'Unsuccessful:' in the SERVER XREMOTE display.

CTR xremoteServerAccess2

1.3.6.1.4.1.33.10.10.5

Counter

read-only

The number of times the system successfully accessed the XREMOTE secondary font server. Corresponds directly to the value labeled 'Attempts to access:', 'Server2', and 'Successful:' in the SERVER XREMOTE display.

CTR xremoteServerAccessFailed2

1.3.6.1.4.1.33.10.10.6

Counter

read-only

The number of times the system failed access to the XREMOTE secondary font server. Corresponds directly to the value labeled 'Attempts to access:', 'Server2', and 'Unsuccessful:' in the SERVER XREMOTE display.

GAU xremoteSessions

1.3.6.1.4.1.33.10.10.7

Gauge

read-only

The number of connected XREMOTE sessions. Corresponds directly to the value labeled 'Current Number of Xremote Sessions:' in the SERVER XREMOTE display.

xremotePortTable

1.3.6.1.4.1.33.10.10.8

not-accessible

A list of XREMOTE character port entries.

xremotePortEntry

1.3.6.1.4.1.33.10.10.8.1

not-accessible

XREMOTE parameter values for a port.

INT xremotePortIndex

1.3.6.1.4.1.33.10.10.8.1.1

INTEGER

read-only

An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.

INT xremotePortXremote

1.3.6.1.4.1.33.10.10.8.1.2

INTEGER

read-write

Control for use of XREMOTE on the port. Corresponds directly to PORT XREMOTE and the presence of the label 'Xremote' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display.

INT xremotePortXdmQuery

1.3.6.1.4.1.33.10.10.8.1.3

INTEGER

read-write

The type of query message issued by a port when searching for an X Display Manager (XDM). Corresponds directly to the PORT XDM QUERY and the 'XDM Query:' in the PORT ALTERNATE CHARACTERISTICS display

STR xremotePortXdmHost

1.3.6.1.4.1.33.10.10.8.1.4

DisplayString

read-write

The Domain name or Internet address of the X Display Manager (XDM) for a port. Corresponds directly to the PORT XDM HOST and the 'XDM Host:' in the PORT ALTERNATE CHARACTERISTICS display

GAU xremoteServerClients

1.3.6.1.4.1.33.10.10.9

Gauge

read-only

The number of active X clients. Corresponds directly to the value labeled 'Current Number of XClients:' in the SERVER XREMOTE display.

xRotary

1.3.6.1.4.1.33.10.11

INT rotaryNumber

1.3.6.1.4.1.33.10.11.1

INTEGER

read-only

The number of entries in the Rotary table.

rotaryTable

1.3.6.1.4.1.33.10.11.2

not-accessible

A list of rotary entries.

rotaryEntry

1.3.6.1.4.1.33.10.11.2.1

not-accessible

Parameter values for a rotary.

IP rotaryAddress

1.3.6.1.4.1.33.10.11.2.1.1

IpAddress

read-only

The internet address to be recognized as a rotary. Corresponds directly to the ip-address portion of SERVER INTERNET ROTARY and the value labeled 'Internet Address' in the SERVER INTERNET ROTARY display.

INT rotaryStatus

1.3.6.1.4.1.33.10.11.2.1.2

INTEGER

read-write

Status of this entry. Setting the value to 'invalid' invalidates the entry, corresponding directly to the CLEAR SERVER INTERNET ROTARY command. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Setting the value to 'valid' in conjunction with a new rotaryAddress will add a new entry to the table. When adding a new entry, one should also specify a rotaryPortMap as the DEFVAL of 0..0 for rotaryPortMap is meaningless.

OCT rotaryPortMap

1.3.6.1.4.1.33.10.11.2.1.3

OCTET STRING

read-write

The list of character ports that compose the rotary. The OCTET STRING contains a bitmap, with one bit for each port, and enough octets for all the ports on the system. Port numbers are as defined for charPortIndex in the Proposed Standard Internet Character MIB. Corresponding bit numbers start with 1 as the high-order bit of the first octet. Corresponds directly to port-list portion of SERVER INTERNET ROTARY and the value labeled 'Ports' in the SERVER INTERNET ROTARY display.

xEgp

1.3.6.1.4.1.33.10.12

INT egpRouting

1.3.6.1.4.1.33.10.12.1

INTEGER

read-write

Control for EGP routing services.

INT egpStatus

1.3.6.1.4.1.33.10.12.2

INTEGER

read-only

Status of the EGP routing services indicating why it is not running.

egpNbrTable

1.3.6.1.4.1.33.10.12.3

not-accessible

The EGP neighbor table.

egpNbrEntry

1.3.6.1.4.1.33.10.12.3.1

not-accessible

Information about this entity's relationship with a particular EGP neighbor.

IP egpNbrAddr

1.3.6.1.4.1.33.10.12.3.1.1

IpAddress

read-only

The IP address of this entry's EGP neighbor.

INT egpNbrIntervalDead

1.3.6.1.4.1.33.10.12.3.1.2

INTEGER

read-write

The interval upon entering the cease or idle state before automatically assuming a Start Event has occured. If a neighbor does not respond within 5 minutes, a Stop Event will automatically occur. The interval is in hundredths of seconds.

INT egpNbrStatus

1.3.6.1.4.1.33.10.12.3.1.3

INTEGER

read-write

The status of the entry for this neighbor. Set to 'invalid' to remove the entry.

xOspf

1.3.6.1.4.1.33.10.13

INT ospfAutoConfigure

1.3.6.1.4.1.33.10.13.1

INTEGER

read-write

Control whether OSPF will automatically configure itself.

INT ospfStatus

1.3.6.1.4.1.33.10.13.2

INTEGER

read-only

Status of the OSPF routing services indicating why it is not running.

ospfIfMtrcTable

1.3.6.1.4.1.33.10.13.3

not-accessible

The TOS metrics for a non-virtual interface identified by the interface index.

ospfIfMtrcEntry

1.3.6.1.4.1.33.10.13.3.1

not-accessible

A particular TOS metric for a non-virtual interface identified by the interface index.

IP ospfIfMtrcIpAddress

1.3.6.1.4.1.33.10.13.3.1.1

IpAddress

read-only

Same as ospfIfMetricIpAddress in OSPF MIB, the IP address of this OSPF interface.

INT ospfIfMtrcAddressLessIf

1.3.6.1.4.1.33.10.13.3.1.2

INTEGER

read-only

Same as ospfIfMetricAddressLessIf in OSPF MIB, for the purpose of easing the instancing of addressed and addressless interfaces. This variable takes the value 0 on interfaces with IP Addresses, and the value of ifIndex for interfaces having no IP Address.

INT ospfIfMtrcTos

1.3.6.1.4.1.33.10.13.3.1.3

INTEGER

read-only

Same as ospfIfMetricTOS in OSPF MIB, the type of service metric being referenced.

INT ospfIfMtrcCostActual

1.3.6.1.4.1.33.10.13.3.1.4

INTEGER

read-only

The actual cost of the metric in case it was set to auto.

ospfXIfTable

1.3.6.1.4.1.33.10.13.4

not-accessible

The TOS metrics for a non-virtual interface identified by the interface index.

ospfXIfEntry

1.3.6.1.4.1.33.10.13.4.1

not-accessible

Interface parameters for OSPF.

IP ospfXIfIpAddress

1.3.6.1.4.1.33.10.13.4.1.1

IpAddress

read-only

Same as ospfIfIpAddress in OSPF MIB, the IP address of this OSPF interface.

INT ospfXIfAddressLessIf

1.3.6.1.4.1.33.10.13.4.1.2

INTEGER

read-only

Same as ospfIfAddressLessIf in OSPF MIB, for the purpose of easing the instancing of addressed and addressless interfaces. This variable takes the value 0 on interfaces with IP Addresses, and the value of ifIndex for interfaces having no IP Address.

INT ospfXIfTypeActual

1.3.6.1.4.1.33.10.13.4.1.3

INTEGER

read-only

The interface type.

INT ospfXIfStatus

1.3.6.1.4.1.33.10.13.4.1.4

INTEGER

read-write

The status of the interface entry, including the entry in the standard OSPF MIB. Set to 'invalid' to remove the entry.

ospfXAreaTable

1.3.6.1.4.1.33.10.13.5

not-accessible

Parameters for an OSPF area.

ospfXAreaEntry

1.3.6.1.4.1.33.10.13.5.1

not-accessible

An area entry.

IP ospfXAreaId

1.3.6.1.4.1.33.10.13.5.1.1

IpAddress

read-only

Same as ospfAreaId in OSPF MIB, the ID of the area.

INT ospfXAreaStatus

1.3.6.1.4.1.33.10.13.5.1.2

INTEGER

read-write

The status of the area entry, including the entry in the standard OSPF MIB. Set to 'invalid' to remove the entry.

xRouterIp

1.3.6.1.4.1.33.10.14

ipAdExtTable

1.3.6.1.4.1.33.10.14.1

not-accessible

Table of additional fields indexed by local IP address. An entry in this table is created or deleted when an entry in the ipAddrTable is created or deleted.

ipAdExtEntry

1.3.6.1.4.1.33.10.14.1.1

not-accessible

A particular entry.

IP ipAdEntExtAddress

1.3.6.1.4.1.33.10.14.1.1.1

IpAddress

read-only

Same as ipAdEntAddr, a local address representing a network connection.

INT ipAdEntExtProxyArp

1.3.6.1.4.1.33.10.14.1.1.2

INTEGER

read-write

Controls whether proxy ARP is active for this local address.

INT ipAdEntExtRip

1.3.6.1.4.1.33.10.14.1.1.3

INTEGER

read-only

Controls whether RIP as a router discovery protocol is active for this local address.

ipRouterIfTable

1.3.6.1.4.1.33.10.14.2

not-accessible

Table of IP router values indexed by interface.

ipRouterIfEntry

1.3.6.1.4.1.33.10.14.2.1

not-accessible

A particular entry.

INT ipRouterIfIndex

1.3.6.1.4.1.33.10.14.2.1.1

INTEGER

read-only

The index of the interface; same as IfIndex.

INT ipRouterIfProtocolPriority

1.3.6.1.4.1.33.10.14.2.1.2

INTEGER

read-write

The priority at which all Internet routed packets will be placed on the WAN output queue.

INT ipRouterIfMTU

1.3.6.1.4.1.33.10.14.2.1.3

INTEGER

read-write

The size of the largest datagram that IP can transmit on this interface. The default value is actually hardware dependent.

INT ipRouterIfRDP

1.3.6.1.4.1.33.10.14.2.1.4

INTEGER

read-write

Control for whether the router side of the Router Discovery Protocol is running on this interface.

CTR ipRouterIfArpPacketsIn

1.3.6.1.4.1.33.10.14.2.1.5

Counter

read-only

The number of ARP packets received on this interface.

CTR ipRouterIfArpPacketsOut

1.3.6.1.4.1.33.10.14.2.1.6

Counter

read-only

The number of ARP packets sent on this interface.

CTR ipRouterIfPacketsIn

1.3.6.1.4.1.33.10.14.2.1.7

Counter

read-only

The number of IP packets received on this interface.

CTR ipRouterIfPacketsOut

1.3.6.1.4.1.33.10.14.2.1.8

Counter

read-only

The number of IP packets sent on this interface.

CTR ipRouterIfForwardsIn

1.3.6.1.4.1.33.10.14.2.1.9

Counter

read-only

The number of IP packets received on this interface that were forwarded.

CTR ipRouterIfForwardsOut

1.3.6.1.4.1.33.10.14.2.1.10

Counter

read-only

The number of IP packets sent on this interface that were forwarded.

xIpTraffic

1.3.6.1.4.1.33.10.14.3

INT ipTrafficSort

1.3.6.1.4.1.33.10.14.3.1

INTEGER

read-write

Setting to 'execute' causes the most recent traffic information to be sorted into the ipTrafficTable. The sorting precedence is: decreasing percentage, increasing destination address, increasing source address, and increasing interface number. Setting to 'ready' has no effect.

ipTrafficTable

1.3.6.1.4.1.33.10.14.3.2

not-accessible

A list of traffic entries, sorted in the order specified by ipTrafficSort.

ipTrafficEntry

1.3.6.1.4.1.33.10.14.3.2.1

not-accessible

A traffic entry.

INT ipTrafficIndex

1.3.6.1.4.1.33.10.14.3.2.1.1

INTEGER

read-only

Identification of this traffic entry.

INT ipTrafficPercent

1.3.6.1.4.1.33.10.14.3.2.1.2

INTEGER

read-only

The percentage of total traffic that this traffic entry represents, in tenths of a percent.

IP ipTrafficDstAddr

1.3.6.1.4.1.33.10.14.3.2.1.3

IpAddress

read-only

The destination IP address of the traffic entry.

IP ipTrafficSrcAddr

1.3.6.1.4.1.33.10.14.3.2.1.4

IpAddress

read-only

The source IP address of the traffic entry.

INT ipTrafficProtocol

1.3.6.1.4.1.33.10.14.3.2.1.5

INTEGER

read-only

The IP protocol type of the traffic entry.

INT ipTrafficDstPort

1.3.6.1.4.1.33.10.14.3.2.1.6

INTEGER

read-only

The destination TCP/UDP port of the traffic entry.

INT ipTrafficSrcPort

1.3.6.1.4.1.33.10.14.3.2.1.7

INTEGER

read-only

The source TCP/UDP port of the traffic entry.

INT ipTrafficIf

1.3.6.1.4.1.33.10.14.3.2.1.8

INTEGER

read-only

The inbound interface to which the traffic entry applies. This value is the same as IfIndex.

INT ipTrafficMonitoring

1.3.6.1.4.1.33.10.14.3.3

INTEGER

read-write

Control for whether the router side of the Router Discovery Protocol is running on this interface.

xIpNetToMediaTable

1.3.6.1.4.1.33.10.14.4

not-accessible

iTouch extensions to the IP Address Translation Table.

xIpNetToMediaEntry

1.3.6.1.4.1.33.10.14.4.1

not-accessible

Entry parameters.

INT xIpNetToMediaCircuit

1.3.6.1.4.1.33.10.14.4.1.1

INTEGER

read-write

An additional identifier for the circuit (i.e. Frame Relay DLCI or X.25 VC) which the entry extends.

INT xIpNetToMediaReverseArp

1.3.6.1.4.1.33.10.14.4.1.2

INTEGER

read-write

Whether reverse ARP is supported on this entry.

xRouterUdp

1.3.6.1.4.1.33.10.15

udpBcstServerTable

1.3.6.1.4.1.33.10.15.1

not-accessible

Table of servers to whom UDP broadcast messages will be forwarded.

udpBcstServerEntry

1.3.6.1.4.1.33.10.15.1.1

not-accessible

A particular entry.

IP udpBcstServerAddress

1.3.6.1.4.1.33.10.15.1.1.1

IpAddress

read-only

Internet address of the server.

INT udpBcstServerStatus

1.3.6.1.4.1.33.10.15.1.1.2

INTEGER

read-write

The status of the server. Set to 'invalid' to remove the entry.

udpBcstPortTable

1.3.6.1.4.1.33.10.15.2

not-accessible

Table of incoming UDP destination port numbers for which UDP broadcasts will be forwarded.

udpBcstPortEntry

1.3.6.1.4.1.33.10.15.2.1

not-accessible

A particular entry.

INT udpBcstPort

1.3.6.1.4.1.33.10.15.2.1.1

INTEGER

read-only

The incoming destination UDP port number.

INT udpBcstPortStatus

1.3.6.1.4.1.33.10.15.2.1.2

INTEGER

read-write

The status of broadcast forwarding for the port. Set to 'invalid' to remove the entry.

INT udpBcstRouting

1.3.6.1.4.1.33.10.15.3

INTEGER

read-write

The indication of whether this entity forwards UDP broadcasts.

xRouterPolicy

1.3.6.1.4.1.33.10.16

xImport

1.3.6.1.4.1.33.10.16.1

impEgpRuleTable

1.3.6.1.4.1.33.10.16.1.1

not-accessible

The EGP import table.

impEgpRuleEntry

1.3.6.1.4.1.33.10.16.1.1.1

not-accessible

An EGP import rule. Each rule is keyed by the Autonomous System of the EGP neighbor and the IP network of the route learned from the neighbor. The AS can be set to a wild card as can the IP network. When a route is learned from a neighbor, the most specific import rule is applied to the route. The route is either accepted or discarded and its metrics are applied according to the rule. An exact match on the AS and IP network is the most exact rule. An exact match on the AS and a wild card match on the IP network is the 2nd most exact rule. A wild card match on the AS and an exact match on the IP network is the 3rd most exact match. Finally, a total wild card match is the least exact rule.

INT impEgpRuleAs

1.3.6.1.4.1.33.10.16.1.1.1.1

INTEGER

read-only

The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number.

IP impEgpRuleNetwork

1.3.6.1.4.1.33.10.16.1.1.1.2

IpAddress

read-only

The IP network learned from the neighbor. The value 255.255.255.255 is a wild card matching any network.

INT impEgpRuleAction

1.3.6.1.4.1.33.10.16.1.1.1.3

INTEGER

read-write

Control whether the route is learned or discarded.

INT impEgpRulePreference

1.3.6.1.4.1.33.10.16.1.1.1.4

INTEGER

read-write

Preference to be stored with the route. The lower preference is preferred.

INT impEgpRuleType

1.3.6.1.4.1.33.10.16.1.1.1.5

INTEGER

read-write

Type to be stored with the route. The type is based on the OSPF external type and used to help compare metrics. Type 1 is preferred over type 2.

INT impEgpRuleMetricAction

1.3.6.1.4.1.33.10.16.1.1.1.6

INTEGER

read-write

How to apply the impEgpRuleMetric field to the metric learned with the route before storing it in the routing table.

INT impEgpRuleMetric

1.3.6.1.4.1.33.10.16.1.1.1.7

INTEGER

read-write

Metric value to be applied to the metric learned learned with the route before storing it in the routing table.

INT impEgpRuleStatus

1.3.6.1.4.1.33.10.16.1.1.1.8

INTEGER

read-write

The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.

impOspfRuleTable

1.3.6.1.4.1.33.10.16.1.2

not-accessible

The OSPF import table.

impOspfRuleEntry

1.3.6.1.4.1.33.10.16.1.2.1

not-accessible

An OSPF import rule. Each rule is keyed by the IP network of the route and the AS from which it was learned. The Ip network and the AS can both be set to a wild card. When an OSPF route is added to the routing table, the most specific import rule is applied to set the preference of the route. An exact match on the Ip network and on the AS is the most exact rule. An exact match on the IP network and a wild card match on the AS is the 2nd most exact rule. A wild card match on both the on the AS and IP network is the next and least exact rule.

IP impOspfRuleNetwork

1.3.6.1.4.1.33.10.16.1.2.1.1

IpAddress

read-only

The IP network of the route. The value 255.255.255.255 is a wild card matching any network.

INT impOspfRulePreference

1.3.6.1.4.1.33.10.16.1.2.1.2

INTEGER

read-write

Preference to be stored with the route. The lower preference is preferred.

INT impOspfRuleStatus

1.3.6.1.4.1.33.10.16.1.2.1.3

INTEGER

read-write

The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.

impRipRuleTable

1.3.6.1.4.1.33.10.16.1.3

not-accessible

The RIP import table.

impRipRuleEntry

1.3.6.1.4.1.33.10.16.1.3.1

not-accessible

A RIP import rule. Each rule is keyed by the interface and the IP network of the route learned from the neighbor. The route is either accepted or discarded and its metrics are applied according to the rule. An exact match on the IP network is the rule that will be applied. If an exact match does not exist, the rule with the wild card IP network is used.

IP impRipRuleFromIf

1.3.6.1.4.1.33.10.16.1.3.1.1

IpAddress

read-only

The interface index of the interface where the rule applies, same as ifIndex.

IP impRipRuleNetwork

1.3.6.1.4.1.33.10.16.1.3.1.2

IpAddress

read-only

The IP network learned from the neighbor. The value 255.255.255.255 is a wild card matching any network.

INT impRipRuleAction

1.3.6.1.4.1.33.10.16.1.3.1.3

INTEGER

read-write

Control whether the route is learned or discarded.

INT impRipRulePreference

1.3.6.1.4.1.33.10.16.1.3.1.4

INTEGER

read-write

Preference to be stored with the route. The lower preference are preferred.

INT impRipRuleType

1.3.6.1.4.1.33.10.16.1.3.1.5

INTEGER

read-write

Type to be stored with the route. The type is based on the OSPF external type and used to help compare metrics. Type 1 is preferred over type 2.

INT impRipRuleMetricAction

1.3.6.1.4.1.33.10.16.1.3.1.6

INTEGER

read-write

How to apply the impRipRuleMetric field to the metric learned with the route before storing it in the routing table.

INT impRipRuleMetric

1.3.6.1.4.1.33.10.16.1.3.1.7

INTEGER

read-write

Metric value to be applied to the metric learned learned with the route before storing it in the routing table.

INT impRipRuleStatus

1.3.6.1.4.1.33.10.16.1.3.1.8

INTEGER

read-write

The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.

impIsisRuleTable

1.3.6.1.4.1.33.10.16.1.4

not-accessible

The Isis import table.

impIsisRuleEntry

1.3.6.1.4.1.33.10.16.1.4.1

not-accessible

An Isis import rule. Each rule is keyed by the IP network of the route learned from the neighbor. The route is either accepted or discarded and its metrics are applied according to the rule. An exact match on the IP network is the rule that will be applied. If an exact match does not exist, the rule with the wild card IP network is used.

IP impIsisRuleNetwork

1.3.6.1.4.1.33.10.16.1.4.1.1

IpAddress

read-only

The IP network learned from the neighbor. The value 255.255.255.255 is a wild card matching any network.

INT impIsisRuleAction

1.3.6.1.4.1.33.10.16.1.4.1.2

INTEGER

read-write

Control whether the route is learned or discarded.

INT impIsisRulePreference

1.3.6.1.4.1.33.10.16.1.4.1.3

INTEGER

read-write

Preference to be stored with the route. The lower preference are preferred.

INT impIsisRuleType

1.3.6.1.4.1.33.10.16.1.4.1.4

INTEGER

read-write

Type to be stored with the route. The type is based on the OSPF external type and used to help compare metrics. Type 1 is preferred over type 2.

INT impIsisRuleMetricAction

1.3.6.1.4.1.33.10.16.1.4.1.5

INTEGER

read-write

How to apply the impIsisRuleMetric field to the metric learned with the route before storing it in the routing table.

INT impIsisRuleMetric

1.3.6.1.4.1.33.10.16.1.4.1.6

INTEGER

read-write

Metric value to be applied to the metric learned learned with the route before storing it in the routing table.

INT impIsisRuleStatus

1.3.6.1.4.1.33.10.16.1.4.1.7

INTEGER

read-write

The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.

xExport

1.3.6.1.4.1.33.10.16.2

expEgpToEgpRuleTable

1.3.6.1.4.1.33.10.16.2.1

not-accessible

The EGP to EGP export table.

expEgpToEgpRuleEntry

1.3.6.1.4.1.33.10.16.2.1.1

not-accessible

An EGP to EGP export rule. Each rule is keyed by the Autonomous System of the EGP neighbor, the IP network of the EGP route in the routing table, and the Autonomous System from which the route was learned. The neighbor (to) AS can be set to a wild card as can the IP network and the (from) AS. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: To As IP Network From AS Rank exact exact exact 1st exact exact wild card 2nd exact wild card exact 3rd exact wild card wild card 4th wild card exact exact 5th wild card exact wild card 6th wild card wild card exact 7th wild card wild card wild card 8th

INT expEgpToEgpRuleToAs

1.3.6.1.4.1.33.10.16.2.1.1.1

INTEGER

read-only

The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number.

IP expEgpToEgpRuleNetwork

1.3.6.1.4.1.33.10.16.2.1.1.2

IpAddress

read-only

The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.

INT expEgpToEgpRuleFromAs

1.3.6.1.4.1.33.10.16.2.1.1.3

INTEGER

read-only

The Autonomous System of the route in the route table. The value 65535 is a wild card matching any AS number.

INT expEgpToEgpRuleAction

1.3.6.1.4.1.33.10.16.2.1.1.4

INTEGER

read-write

Control whether the route is advertised or not.

INT expEgpToEgpRuleMetricAction

1.3.6.1.4.1.33.10.16.2.1.1.5

INTEGER

read-write

How to apply the expEgpToEgpRuleMetric field to the metric in the route table entry before the route is advertised.

INT expEgpToEgpRuleMetric

1.3.6.1.4.1.33.10.16.2.1.1.6

INTEGER

read-write

Metric value to be applied to the metric in the route table entry before the route is advertised.

INT expEgpToEgpRuleStatus

1.3.6.1.4.1.33.10.16.2.1.1.7

INTEGER

read-write

The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.

expOspfToEgpRuleTable

1.3.6.1.4.1.33.10.16.2.2

not-accessible

The OSPF to EGP export table.

expOspfToEgpRuleEntry

1.3.6.1.4.1.33.10.16.2.2.1

not-accessible

An OSPF to EGP export rule. Each rule is keyed by the Autonomous System of the EGP neighbor, the IP network of the OSPF route in the routing table, and the Autonomous System from which the route was learned. The neighbor (to) AS can be set to a wild card as can the IP network and the (from) AS. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: To As IP Network From AS Rank exact exact exact 1st exact exact wild card 2nd exact wild card exact 3rd exact wild card wild card 4th wild card exact exact 5th wild card exact wild card 6th wild card wild card exact 7th wild card wild card wild card 8th

INT expOspfToEgpRuleToAs

1.3.6.1.4.1.33.10.16.2.2.1.1

INTEGER

read-only

The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number.

IP expOspfToEgpRuleNetwork

1.3.6.1.4.1.33.10.16.2.2.1.2

IpAddress

read-only

The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.

INT expOspfToEgpRuleFromAs

1.3.6.1.4.1.33.10.16.2.2.1.3

INTEGER

read-only

The Autonomous System of the route in the route table. Local indicates that the route was not an external OSPF route. The value 65535 is a wild card matching any AS number, and the value 65534 is for routes within the local AS.

INT expOspfToEgpRuleAction

1.3.6.1.4.1.33.10.16.2.2.1.4

INTEGER

read-write

Control whether the route is advertised or not.

INT expOspfToEgpRuleMetricAction

1.3.6.1.4.1.33.10.16.2.2.1.5

INTEGER

read-write

How to apply the expOspfToEgpRuleMetric field to the metric in the route table entry before the route is advertised.

INT expOspfToEgpRuleMetric

1.3.6.1.4.1.33.10.16.2.2.1.6

INTEGER

read-write

Metric value to be applied to the metric in the route table entry before the route is advertised.

INT expOspfToEgpRuleStatus

1.3.6.1.4.1.33.10.16.2.2.1.7

INTEGER

read-write

The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.

expStaticToEgpRuleTable

1.3.6.1.4.1.33.10.16.2.3

not-accessible

The Static to EGP export table.

expStaticToEgpRuleEntry

1.3.6.1.4.1.33.10.16.2.3.1

not-accessible

An Static to EGP export rule. Each rule is keyed by the Autonomous System of the EGP neighbor and the IP network of the Static route in the routing table. The neighbor (to) AS can be set to a wild card as can the IP network. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: To As IP Network Rank exact exact 1st exact wild card 2nd wild card exact 3rd wild card wild card 4th

INT expStaticToEgpRuleToAs

1.3.6.1.4.1.33.10.16.2.3.1.1

INTEGER

read-only

The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number.

IP expStaticToEgpRuleNetwork

1.3.6.1.4.1.33.10.16.2.3.1.2

IpAddress

read-only

The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.

INT expStaticToEgpRuleAction

1.3.6.1.4.1.33.10.16.2.3.1.3

INTEGER

read-write

Control whether the route is advertised or not.

INT expStaticToEgpRuleMetricAction

1.3.6.1.4.1.33.10.16.2.3.1.4

INTEGER

read-write

How to apply the expStaticToEgpRuleMetric field to the metric in the route table entry before the route is advertised.

INT expStaticToEgpRuleMetric

1.3.6.1.4.1.33.10.16.2.3.1.5

INTEGER

read-write

Metric value to be applied to the metric in the route table entry before the route is advertised.

INT expStaticToEgpRuleStatus

1.3.6.1.4.1.33.10.16.2.3.1.6

INTEGER

read-write

The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.

expEgpToOspfRuleTable

1.3.6.1.4.1.33.10.16.2.4

not-accessible

The EGP to OSPF export table.

expEgpToOspfRuleEntry

1.3.6.1.4.1.33.10.16.2.4.1

not-accessible

An EGP to OSPF export rule. Each rule is keyed by the IP network of the EGP route in the routing table, and the Autonomous System from which the route was learned. The Ip network can be set to a wild card as can the (from) AS. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network From AS Rank exact exact 1st exact wild card 2nd wild card exact 3rd wild card wild card 4th

IP expEgpToOspfRuleNetwork

1.3.6.1.4.1.33.10.16.2.4.1.1

IpAddress

read-only

The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.

INT expEgpToOspfRuleFromAs

1.3.6.1.4.1.33.10.16.2.4.1.2

INTEGER

read-only

The Autonomous System of the route in the route table. The value 65535 is a wild card matching any AS number.

INT expEgpToOspfRuleAction

1.3.6.1.4.1.33.10.16.2.4.1.3

INTEGER

read-write

Control whether the route is advertised or not.

INT expEgpToOspfRuleStatus

1.3.6.1.4.1.33.10.16.2.4.1.4

INTEGER

read-write

The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.

expRipToEgpRuleTable

1.3.6.1.4.1.33.10.16.2.5

not-accessible

The Rip to EGP export table.

expRipToEgpRuleEntry

1.3.6.1.4.1.33.10.16.2.5.1

not-accessible

An Rip to EGP export rule. Each rule is keyed by the Autonomous System of the EGP neighbor and the IP network of the Rip route in the routing table. The neighbor (to) AS can be set to a wild card as can the IP network. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: To As IP Network Best Match Rank exact exact 1st exact wild card 2nd wild card exact 3rd wild card wild card 4th

INT expRipToEgpRuleToAs

1.3.6.1.4.1.33.10.16.2.5.1.1

INTEGER

read-only

The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number.

IP expRipToEgpRuleNetwork

1.3.6.1.4.1.33.10.16.2.5.1.2

IpAddress

read-only

The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.

INT expRipToEgpRuleAction

1.3.6.1.4.1.33.10.16.2.5.1.3

INTEGER

read-write

Control whether the route is advertised or not.

INT expRipToEgpRuleMetricAction

1.3.6.1.4.1.33.10.16.2.5.1.4

INTEGER

read-write

How to apply the expRipToEgpRuleMetric field to the metric in the route table entry before the route is advertised.

INT expRipToEgpRuleMetric

1.3.6.1.4.1.33.10.16.2.5.1.5

INTEGER

read-write

Metric value to be applied to the metric in the route table entry before the route is advertised.

INT expRipToEgpRuleStatus

1.3.6.1.4.1.33.10.16.2.5.1.6

INTEGER

read-write

The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.

expRipToOspfRuleTable

1.3.6.1.4.1.33.10.16.2.6

not-accessible

The RIP to OSPF export table.

expRipToOspfRuleEntry

1.3.6.1.4.1.33.10.16.2.6.1

not-accessible

A RIP to OSPF export rule. Each rule is keyed by the IP network of the RIP route in the routing table. The IP network can be set to a wild card. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network Best Match Rank exact 1st wild card 2nd

IP expRipToOspfRuleNetwork

1.3.6.1.4.1.33.10.16.2.6.1.1

IpAddress

read-only

The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.

INT expRipToOspfRuleAction

1.3.6.1.4.1.33.10.16.2.6.1.2

INTEGER

read-write

Control whether the route is advertised or not.

INT expRipToOspfRuleStatus

1.3.6.1.4.1.33.10.16.2.6.1.3

INTEGER

read-write

The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.

expEgpToRipRuleTable

1.3.6.1.4.1.33.10.16.2.7

not-accessible

The EGP to RIP export table.

expEgpToRipRuleEntry

1.3.6.1.4.1.33.10.16.2.7.1

not-accessible

An EGP to RIP export rule. Each rule is keyed by the Autonomous System of the EGP neighbor, the IP network of the EGP route in the routing table, and the Autonomous System from which the route was learned. The IP network can be set to a wild card as can the the from AS. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network From AS Best Match Rank exact exact 1st exact wild card 2nd wild card exact 3rd wild card wild card 4th

IP expEgpToRipRuleToIf

1.3.6.1.4.1.33.10.16.2.7.1.1

IpAddress

read-only

The IP address of the RIP interface to which the rule applies.

IP expEgpToRipRuleNetwork

1.3.6.1.4.1.33.10.16.2.7.1.2

IpAddress

read-only

The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.

INT expEgpToRipRuleFromAs

1.3.6.1.4.1.33.10.16.2.7.1.3

INTEGER

read-only

The Autonomous System of the route in the route table. The value 65535 is a wild card matching any AS number.

INT expEgpToRipRuleAction

1.3.6.1.4.1.33.10.16.2.7.1.4

INTEGER

read-write

Control whether the route is advertised or not.

INT expEgpToRipRuleMetricAction

1.3.6.1.4.1.33.10.16.2.7.1.5

INTEGER

read-write

How to apply the expEgpToRipRuleMetric field to the metric in the route table entry before the route is advertised.

INT expEgpToRipRuleMetric

1.3.6.1.4.1.33.10.16.2.7.1.6

INTEGER

read-write

Metric value to be applied to the metric in the route table entry before the route is advertised.

INT expEgpToRipRuleStatus

1.3.6.1.4.1.33.10.16.2.7.1.7

INTEGER

read-write

The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.

expOspfToRipRuleTable

1.3.6.1.4.1.33.10.16.2.8

not-accessible

The OSPF to RIP export table.

expOspfToRipRuleEntry

1.3.6.1.4.1.33.10.16.2.8.1

not-accessible

An Ospf to RIP export rule. Each rule is keyed by the Autonomous System of the Ospf neighbor, the IP network of the Ospf route in the routing table, and the Autonomous System from which the route was learned. The IP network can be set to a wild card as can the the from AS. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network From AS Best Match Rank exact exact 1st exact wild card 2nd wild card exact 3rd wild card wild card 4th

IP expOspfToRipRuleToIf

1.3.6.1.4.1.33.10.16.2.8.1.1

IpAddress

read-only

The IP address of the RIP interface to which the rule applies.

IP expOspfToRipRuleNetwork

1.3.6.1.4.1.33.10.16.2.8.1.2

IpAddress

read-only

The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.

INT expOspfToRipRuleFromAs

1.3.6.1.4.1.33.10.16.2.8.1.3

INTEGER

read-only

The Autonomous System of the route in the route table. The value 65535 is a wild card matching any AS number, and the value 65534 is for routes within the local AS.

INT expOspfToRipRuleAction

1.3.6.1.4.1.33.10.16.2.8.1.4

INTEGER

read-write

Control whether the route is advertised or not.

INT expOspfToRipRuleMetricAction

1.3.6.1.4.1.33.10.16.2.8.1.5

INTEGER

read-write

How to apply the expOspfToRipRuleMetric field to the metric in the route table entry before the route is advertised.

INT expOspfToRipRuleMetric

1.3.6.1.4.1.33.10.16.2.8.1.6

INTEGER

read-write

Metric value to be applied to the metric in the route table entry before the route is advertised.

INT expOspfToRipRuleStatus

1.3.6.1.4.1.33.10.16.2.8.1.7

INTEGER

read-write

The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. The same is true for the all wild cards where the AS is set to local

expRipToRipRuleTable

1.3.6.1.4.1.33.10.16.2.9

not-accessible

The Rip to Rip export table.

expRipToRipRuleEntry

1.3.6.1.4.1.33.10.16.2.9.1

not-accessible

An Rip to Rip export rule. Each rule is keyed by the IP network of the Rip route in the routing table. The neighbor IP network can be set to a wild card. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network Best Match Rank exact 1st wild card 2nd

IP expRipToRipRuleToIf

1.3.6.1.4.1.33.10.16.2.9.1.1

IpAddress

read-only

The IP address of the RIP interface to which the rule applies.

IP expRipToRipRuleNetwork

1.3.6.1.4.1.33.10.16.2.9.1.2

IpAddress

read-only

The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.

INT expRipToRipRuleAction

1.3.6.1.4.1.33.10.16.2.9.1.3

INTEGER

read-write

Control whether the route is advertised or not.

INT expRipToRipRuleMetricAction

1.3.6.1.4.1.33.10.16.2.9.1.4

INTEGER

read-write

How to apply the expRipToRipRuleMetric field to the metric in the route table entry before the route is advertised.

INT expRipToRipRuleMetric

1.3.6.1.4.1.33.10.16.2.9.1.5

INTEGER

read-write

Metric value to be applied to the metric in the route table entry before the route is advertised.

INT expRipToRipRuleStatus

1.3.6.1.4.1.33.10.16.2.9.1.6

INTEGER

read-write

The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.

expStaticToRipRuleTable

1.3.6.1.4.1.33.10.16.2.10

not-accessible

The Static to Rip export table.

expStaticToRipRuleEntry

1.3.6.1.4.1.33.10.16.2.10.1

not-accessible

An Static to Rip export rule. Each rule is keyed by the IP network of the Static route in the routing table. The neighbor IP network can be set to a wild card. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network Best Match Rank exact 1st wild card 2nd

IP expStaticToRipRuleToIf

1.3.6.1.4.1.33.10.16.2.10.1.1

IpAddress

read-only

The IP address of the RIP interface to which the rule applies.

IP expStaticToRipRuleNetwork

1.3.6.1.4.1.33.10.16.2.10.1.2

IpAddress

read-only

The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.

INT expStaticToRipRuleAction

1.3.6.1.4.1.33.10.16.2.10.1.3

INTEGER

read-write

Control whether the route is advertised or not.

INT expStaticToRipRuleMetricAction

1.3.6.1.4.1.33.10.16.2.10.1.4

INTEGER

read-write

How to apply the expStaticToRipRuleMetric field to the metric in the route table entry before the route is advertised.

INT expStaticToRipRuleMetric

1.3.6.1.4.1.33.10.16.2.10.1.5

INTEGER

read-write

Metric value to be applied to the metric in the route table entry before the route is advertised.

INT expStaticToRipRuleStatus

1.3.6.1.4.1.33.10.16.2.10.1.6

INTEGER

read-write

The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.

expIsisToEgpRuleTable

1.3.6.1.4.1.33.10.16.2.11

not-accessible

The Isis to EGP export table.

expIsisToEgpRuleEntry

1.3.6.1.4.1.33.10.16.2.11.1

not-accessible

An Isis to EGP export rule. Each rule is keyed by the Autonomous System of the EGP neighbor and the IP network of the Isis route in the routing table. The neighbor (to) AS can be set to a wild card as can the IP network. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: To As IP Network Best Match Rank exact exact 1st exact wild card 2nd wild card exact 3rd wild card wild card 4th .

INT expIsisToEgpRuleToAs

1.3.6.1.4.1.33.10.16.2.11.1.1

INTEGER

read-only

The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number.

IP expIsisToEgpRuleNetwork

1.3.6.1.4.1.33.10.16.2.11.1.2

IpAddress

read-only

The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.

INT expIsisToEgpRuleAction

1.3.6.1.4.1.33.10.16.2.11.1.3

INTEGER

read-write

Control whether the route is advertised or not.

INT expIsisToEgpRuleMetricAction

1.3.6.1.4.1.33.10.16.2.11.1.4

INTEGER

read-write

How to apply the expIsisToEgpRuleMetric field to the metric in the route table entry before the route is advertised.

INT expIsisToEgpRuleMetric

1.3.6.1.4.1.33.10.16.2.11.1.5

INTEGER

read-write

Metric value to be applied to the metric in the route table entry before the route is advertised.

INT expIsisToEgpRuleStatus

1.3.6.1.4.1.33.10.16.2.11.1.6

INTEGER

read-write

The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.

expIsisToOspfRuleTable

1.3.6.1.4.1.33.10.16.2.12

not-accessible

The Isis to Ospf export table.

expIsisToOspfRuleEntry

1.3.6.1.4.1.33.10.16.2.12.1

not-accessible

An Isis to Ospf export rule. Each rule is keyed by the IP network of the Isis route in the routing table. The IP network can be set to a wild card. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network Best Match Rank exact 1st wild card 2nd .

IP expIsisToOspfRuleNetwork

1.3.6.1.4.1.33.10.16.2.12.1.1

IpAddress

read-only

The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.

INT expIsisToOspfRuleAction

1.3.6.1.4.1.33.10.16.2.12.1.2

INTEGER

read-write

Control whether the route is advertised or not.

INT expIsisToOspfRuleStatus

1.3.6.1.4.1.33.10.16.2.12.1.3

INTEGER

read-write

The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.

expIsisToRipRuleTable

1.3.6.1.4.1.33.10.16.2.13

not-accessible

The Isis to Rip export table.

expIsisToRipRuleEntry

1.3.6.1.4.1.33.10.16.2.13.1

not-accessible

An Isis to Rip export rule. Each rule is keyed by the IP network of the Isis route in the routing table. The IP network can be set to a wild card. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network Best Match Rank exact 1st wild card 2nd .

IP expIsisToRipRuleToIf

1.3.6.1.4.1.33.10.16.2.13.1.1

IpAddress

read-only

The IP address of the RIP interface to which the rule applies.

IP expIsisToRipRuleNetwork

1.3.6.1.4.1.33.10.16.2.13.1.2

IpAddress

read-only

The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.

INT expIsisToRipRuleAction

1.3.6.1.4.1.33.10.16.2.13.1.3

INTEGER

read-write

Control whether the route is advertised or not.

INT expIsisToRipRuleMetricAction

1.3.6.1.4.1.33.10.16.2.13.1.4

INTEGER

read-write

How to apply the expIsisToRipRuleMetric field to the metric in the route table entry before the route is advertised.

INT expIsisToRipRuleMetric

1.3.6.1.4.1.33.10.16.2.13.1.5

INTEGER

read-write

Metric value to be applied to the metric in the route table entry before the route is advertised.

INT expIsisToRipRuleStatus

1.3.6.1.4.1.33.10.16.2.13.1.6

INTEGER

read-write

The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.

expEgpToIsisRuleTable

1.3.6.1.4.1.33.10.16.2.14

not-accessible

The EGP to Isis export table.

expEgpToIsisRuleEntry

1.3.6.1.4.1.33.10.16.2.14.1

not-accessible

An EGP to Isis export rule. Each rule is keyed by the Autonomous System of the EGP neighbor, the IP network of the EGP route in the routing table, and the Autonomous System from which the route was learned. The IP network can be set to a wild card as can the from AS. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network From AS Best Match Rank exact exact 1st exact wild card 2nd wild card exact 3rd wild card wild card 4th .

IP expEgpToIsisRuleNetwork

1.3.6.1.4.1.33.10.16.2.14.1.1

IpAddress

read-only

The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.

INT expEgpToIsisRuleFromAs

1.3.6.1.4.1.33.10.16.2.14.1.2

INTEGER

read-only

The Autonomous System of the route in the route table. The value 65535 is a wild card matching any AS number.

INT expEgpToIsisRuleAction

1.3.6.1.4.1.33.10.16.2.14.1.3

INTEGER

read-write

Control whether the route is advertised or not.

INT expEgpToIsisRuleMetricType

1.3.6.1.4.1.33.10.16.2.14.1.4

INTEGER

read-write

Whether to advertise the metric as Internal or External.

INT expEgpToIsisRuleDefaultMetricAction

1.3.6.1.4.1.33.10.16.2.14.1.5

INTEGER

read-write

How to apply the expEgpToIsisDefaultRuleMetric field to the metric in the route table entry before the route is advertised.

INT expEgpToIsisRuleDefaultMetric

1.3.6.1.4.1.33.10.16.2.14.1.6

INTEGER

read-write

Default metric value to be applied to the metric in the route table entry before the route is advertised.

INT expEgpToIsisRuleDelayMetricAction

1.3.6.1.4.1.33.10.16.2.14.1.7

INTEGER

read-write

How to apply the expEgpToIsisDelayRuleMetric field to the metric in the route table entry before the route is advertised.

INT expEgpToIsisRuleDelayMetric

1.3.6.1.4.1.33.10.16.2.14.1.8

INTEGER

read-write

Delay metric value to be applied to the metric in the route table entry before the route is advertised.

INT expEgpToIsisRuleErrorMetricAction

1.3.6.1.4.1.33.10.16.2.14.1.9

INTEGER

read-write

How to apply the expEgpToIsisErrorRuleMetric field to the metric in the route table entry before the route is advertised.

INT expEgpToIsisRuleErrorMetric

1.3.6.1.4.1.33.10.16.2.14.1.10

INTEGER

read-write

Error metric value to be applied to the metric in the route table entry before the route is advertised.

INT expEgpToIsisRuleExpenseMetricAction

1.3.6.1.4.1.33.10.16.2.14.1.11

INTEGER

read-write

How to apply the expEgpToIsisExpenseRuleMetric field to the metric in the route table entry before the route is advertised.

INT expEgpToIsisRuleExpenseMetric

1.3.6.1.4.1.33.10.16.2.14.1.12

INTEGER

read-write

Expense metric value to be applied to the metric in the route table entry before the route is advertised.

INT expEgpToIsisRuleStatus

1.3.6.1.4.1.33.10.16.2.14.1.13

INTEGER

read-write

The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.

expOspfToIsisRuleTable

1.3.6.1.4.1.33.10.16.2.15

not-accessible

The Ospf to Isis export table.

expOspfToIsisRuleEntry

1.3.6.1.4.1.33.10.16.2.15.1

not-accessible

An Ospf to Isis export rule. Each rule is keyed by the Autonomous System of the Ospf neighbor, the IP network of the Ospf route in the routing table, and the Autonomous System from which the route was learned. The IP network can be set to a wild card as can the the from AS. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network From AS Best Match Rank exact exact 1st exact wild card 2nd wild card exact 3rd wild card wild card 4th .

IP expOspfToIsisRuleNetwork

1.3.6.1.4.1.33.10.16.2.15.1.1

IpAddress

read-only

The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.

INT expOspfToIsisRuleFromAs

1.3.6.1.4.1.33.10.16.2.15.1.2

INTEGER

read-only

The Autonomous System of the route in the route table. The value 65535 is a wild card matching any AS number, and the value 65534 is for routes within the local AS.

INT expOspfToIsisRuleAction

1.3.6.1.4.1.33.10.16.2.15.1.3

INTEGER

read-write

Control whether the route is advertised or not.

INT expOspfToIsisRuleMetricType

1.3.6.1.4.1.33.10.16.2.15.1.4

INTEGER

read-write

Whether to advertise the metric as Internal or External.

INT expOspfToIsisRuleDefaultMetricAction

1.3.6.1.4.1.33.10.16.2.15.1.5

INTEGER

read-write

How to apply the expOspfToIsisDefaultRuleMetric field to the metric in the route table entry before the route is advertised.

INT expOspfToIsisRuleDefaultMetric

1.3.6.1.4.1.33.10.16.2.15.1.6

INTEGER

read-write

Default metric value to be applied to the metric in the route table entry before the route is advertised.

INT expOspfToIsisRuleDelayMetricAction

1.3.6.1.4.1.33.10.16.2.15.1.7

INTEGER

read-write

How to apply the expOspfToIsisDelayRuleMetric field to the metric in the route table entry before the route is advertised.

INT expOspfToIsisRuleDelayMetric

1.3.6.1.4.1.33.10.16.2.15.1.8

INTEGER

read-write

Delay metric value to be applied to the metric in the route table entry before the route is advertised.

INT expOspfToIsisRuleErrorMetricAction

1.3.6.1.4.1.33.10.16.2.15.1.9

INTEGER

read-write

How to apply the expOspfToIsisErrorRuleMetric field to the metric in the route table entry before the route is advertised.

INT expOspfToIsisRuleErrorMetric

1.3.6.1.4.1.33.10.16.2.15.1.10

INTEGER

read-write

Error metric value to be applied to the metric in the route table entry before the route is advertised.

INT expOspfToIsisRuleExpenseMetricAction

1.3.6.1.4.1.33.10.16.2.15.1.11

INTEGER

read-write

How to apply the expOspfToIsisExpenseRuleMetric field to the metric in the route table entry before the route is advertised.

INT expOspfToIsisRuleExpenseMetric

1.3.6.1.4.1.33.10.16.2.15.1.12

INTEGER

read-write

Expense metric value to be applied to the metric in the route table entry before the route is advertised.

INT expOspfToIsisRuleStatus

1.3.6.1.4.1.33.10.16.2.15.1.13

INTEGER

read-write

The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. The same is true for the all wild cards where the AS is set to local

expRipToIsisRuleTable

1.3.6.1.4.1.33.10.16.2.16

not-accessible

The Isis to Isis export table.

expRipToIsisRuleEntry

1.3.6.1.4.1.33.10.16.2.16.1

not-accessible

An Isis to Isis export rule. Each rule is keyed by the IP network of the Isis route in the routing table. The neighbor IP network can be set to a wild card. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network Best Match Rank exact 1st wild card 2nd .

IP expRipToIsisRuleNetwork

1.3.6.1.4.1.33.10.16.2.16.1.1

IpAddress

read-only

The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.

INT expRipToIsisRuleAction

1.3.6.1.4.1.33.10.16.2.16.1.2

INTEGER

read-write

Control whether the route is advertised or not.

INT expRipToIsisRuleMetricType

1.3.6.1.4.1.33.10.16.2.16.1.3

INTEGER

read-write

Whether to advertise the metric as Internal or External.

INT expRipToIsisRuleDefaultMetricAction

1.3.6.1.4.1.33.10.16.2.16.1.4

INTEGER

read-write

How to apply the expRipToIsisDefaultRuleMetric field to the metric in the route table entry before the route is advertised.

INT expRipToIsisRuleDefaultMetric

1.3.6.1.4.1.33.10.16.2.16.1.5

INTEGER

read-write

Default metric value to be applied to the metric in the route table entry before the route is advertised.

INT expRipToIsisRuleDelayMetricAction

1.3.6.1.4.1.33.10.16.2.16.1.6

INTEGER

read-write

How to apply the expRipToIsisDelayRuleMetric field to the metric in the route table entry before the route is advertised.

INT expRipToIsisRuleDelayMetric

1.3.6.1.4.1.33.10.16.2.16.1.7

INTEGER

read-write

Delay metric value to be applied to the metric in the route table entry before the route is advertised.

INT expRipToIsisRuleErrorMetricAction

1.3.6.1.4.1.33.10.16.2.16.1.8

INTEGER

read-write

How to apply the expRipToIsisErrorRuleMetric field to the metric in the route table entry before the route is advertised.

INT expRipToIsisRuleErrorMetric

1.3.6.1.4.1.33.10.16.2.16.1.9

INTEGER

read-write

Error metric value to be applied to the metric in the route table entry before the route is advertised.

INT expRipToIsisRuleExpenseMetricAction

1.3.6.1.4.1.33.10.16.2.16.1.10

INTEGER

read-write

How to apply the expRipToIsisExpenseRuleMetric field to the metric in the route table entry before the route is advertised.

INT expRipToIsisRuleExpenseMetric

1.3.6.1.4.1.33.10.16.2.16.1.11

INTEGER

read-write

Expense metric value to be applied to the metric in the route table entry before the route is advertised.

INT expRipToIsisRuleStatus

1.3.6.1.4.1.33.10.16.2.16.1.12

INTEGER

read-write

The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.

expStaticToIsisRuleTable

1.3.6.1.4.1.33.10.16.2.17

not-accessible

The Static to Isis export table.

expStaticToIsisRuleEntry

1.3.6.1.4.1.33.10.16.2.17.1

not-accessible

An Static to Isis export rule. Each rule is keyed by the IP network of the Static route in the routing table. The neighbor IP network can be set to a wild card. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network Best Match Rank exact 1st wild card 2nd .

IP expStaticToIsisRuleNetwork

1.3.6.1.4.1.33.10.16.2.17.1.1

IpAddress

read-only

The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.

INT expStaticToIsisRuleAction

1.3.6.1.4.1.33.10.16.2.17.1.2

INTEGER

read-write

Control whether the route is advertised or not.

INT expStaticToIsisRuleMetricType

1.3.6.1.4.1.33.10.16.2.17.1.3

INTEGER

read-write

Whether to advertise the metric as Internal or External.

INT expStaticToIsisRuleDefaultMetricAction

1.3.6.1.4.1.33.10.16.2.17.1.4

INTEGER

read-write

How to apply the expStaticToIsisDefaultRuleMetric field to the metric in the route table entry before the route is advertised.

INT expStaticToIsisRuleDefaultMetric

1.3.6.1.4.1.33.10.16.2.17.1.5

INTEGER

read-write

Default metric value to be applied to the metric in the route table entry before the route is advertised.

INT expStaticToIsisRuleDelayMetricAction

1.3.6.1.4.1.33.10.16.2.17.1.6

INTEGER

read-write

How to apply the expStaticToIsisDelayRuleMetric field to the metric in the route table entry before the route is advertised.

INT expStaticToIsisRuleDelayMetric

1.3.6.1.4.1.33.10.16.2.17.1.7

INTEGER

read-write

Delay metric value to be applied to the metric in the route table entry before the route is advertised.

INT expStaticToIsisRuleErrorMetricAction

1.3.6.1.4.1.33.10.16.2.17.1.8

INTEGER

read-write

How to apply the expStaticToIsisErrorRuleMetric field to the metric in the route table entry before the route is advertised.

INT expStaticToIsisRuleErrorMetric

1.3.6.1.4.1.33.10.16.2.17.1.9

INTEGER

read-write

Error metric value to be applied to the metric in the route table entry before the route is advertised.

INT expStaticToIsisRuleExpenseMetricAction

1.3.6.1.4.1.33.10.16.2.17.1.10

INTEGER

read-write

How to apply the expStaticToIsisExpenseRuleMetric field to the metric in the route table entry before the route is advertised.

INT expStaticToIsisRuleExpenseMetric

1.3.6.1.4.1.33.10.16.2.17.1.11

INTEGER

read-write

Expense metric value to be applied to the metric in the route table entry before the route is advertised.

INT expStaticToIsisRuleStatus

1.3.6.1.4.1.33.10.16.2.17.1.12

INTEGER

read-write

The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.

xFilter

1.3.6.1.4.1.33.10.16.3

ipIfFilterTable

1.3.6.1.4.1.33.10.16.3.1

not-accessible

Table of filter entries.

ipIfFilterEntry

1.3.6.1.4.1.33.10.16.3.1.1

not-accessible

A particular entry.

INT ipIfFilterIndex

1.3.6.1.4.1.33.10.16.3.1.1.1

INTEGER

read-only

The interface index with which this entry is associated. This value is the same as IfIndex.

IP ipIfFilterDstAddr

1.3.6.1.4.1.33.10.16.3.1.1.2

IpAddress

read-only

The destination IP address to use in the filter match.

IP ipIfFilterDstMask

1.3.6.1.4.1.33.10.16.3.1.1.3

IpAddress

read-only

The destination IP mask to use in the filter match.

IP ipIfFilterSrcAddr

1.3.6.1.4.1.33.10.16.3.1.1.4

IpAddress

read-only

The source IP address to use in the filter match.

IP ipIfFilterSrcMask

1.3.6.1.4.1.33.10.16.3.1.1.5

IpAddress

read-only

The source IP mask to use in the filter match.

INT ipIfFilterProtocol

1.3.6.1.4.1.33.10.16.3.1.1.6

INTEGER

read-only

The protocol to use in the filter match. The value 256 indicates any protocol.

INT ipIfFilterDstPort

1.3.6.1.4.1.33.10.16.3.1.1.7

INTEGER

read-only

The destination port to use in the filter match. This field only applies to TCP and UDP protocol packets. The value 65536 indicates any destination port.

INT ipIfFilterSrcPort

1.3.6.1.4.1.33.10.16.3.1.1.8

INTEGER

read-only

The source port to use in the filter match. This field only applies to TCP and UDP protocol packets. The value 65536 indicates any source port.

INT ipIfFilterAction

1.3.6.1.4.1.33.10.16.3.1.1.9

INTEGER

read-write

Control whether the packet for which this filter is the best match should be forwarded or discarded.

INT ipIfFilterStatus

1.3.6.1.4.1.33.10.16.3.1.1.10

INTEGER

read-write

The status of the filter entry. Set to 'invalid' to remove the entry.

INT ipFilterState

1.3.6.1.4.1.33.10.16.3.2

INTEGER

read-write

The indication of whether this system does IP filtering.

ipIfFilter2Table

1.3.6.1.4.1.33.10.16.3.3

not-accessible

Table of filter entries.

ipIfFilter2Entry

1.3.6.1.4.1.33.10.16.3.3.1

not-accessible

A particular entry.

INT ipIfFilter2Index

1.3.6.1.4.1.33.10.16.3.3.1.1

INTEGER

read-only

The interface index with which this entry is associated. This value is the same as IfIndex.

IP ipIfFilter2DstAddr

1.3.6.1.4.1.33.10.16.3.3.1.2

IpAddress

read-only

The destination IP address to use in the filter match.

IP ipIfFilter2DstMask

1.3.6.1.4.1.33.10.16.3.3.1.3

IpAddress

read-only

The destination IP mask to use in the filter match.

IP ipIfFilter2SrcAddr

1.3.6.1.4.1.33.10.16.3.3.1.4

IpAddress

read-only

The source IP address to use in the filter match.

IP ipIfFilter2SrcMask

1.3.6.1.4.1.33.10.16.3.3.1.5

IpAddress

read-only

The source IP mask to use in the filter match.

INT ipIfFilter2Protocol

1.3.6.1.4.1.33.10.16.3.3.1.6

INTEGER

read-only

The protocol to use in the filter match. The value 256 indicates any protocol.

INT ipIfFilter2DstPortStart

1.3.6.1.4.1.33.10.16.3.3.1.7

INTEGER

read-only

The starting destination port in a range of destination ports to use in the filter match. This field only applies to TCP and UDP protocol packets.

INT ipIfFilter2SrcPortStart

1.3.6.1.4.1.33.10.16.3.3.1.8

INTEGER

read-only

The starting source port in a range of source ports to use in the filter match. This field only applies to TCP and UDP protocol packets.

INT ipIfFilter2Action

1.3.6.1.4.1.33.10.16.3.3.1.9

INTEGER

read-write

Control whether the packet for which this filter is the best match should be forwarded or discarded.

INT ipIfFilter2Status

1.3.6.1.4.1.33.10.16.3.3.1.10

INTEGER

read-write

The status of the filter entry. Set to 'invalid' to remove the entry.

INT ipIfFilter2DstPortEnd

1.3.6.1.4.1.33.10.16.3.3.1.11

INTEGER

read-only

The ending destination port in a range of destination ports to use in the filter match. This field only applies to TCP and UDP protocol packets. This filed must also be greater or equal to the ipIfFilter2DstPortStart field.

INT ipIfFilter2SrcPortEnd

1.3.6.1.4.1.33.10.16.3.3.1.12

INTEGER

read-only

The starting source port in a range of source ports to use in the filter match. This field only applies to TCP and UDP protocol packets. This filed must also be greater or equal to the ipIfFilter2SrcPortStart field.

INT ipIfFilter2TcpSyn

1.3.6.1.4.1.33.10.16.3.3.1.13

INTEGER

read-only

The value of the TCP SYN and ACK bit to ues in the filter match. This field only applies to TCP packets. On indicates that the SYN bit is on and the ACK bit is off. Off is any other combination.

INT ipIfFilter2ProtocolPriority

1.3.6.1.4.1.33.10.16.3.3.1.14

INTEGER

read-write

Control the priority at which the packet for which this filter is the best match should be placed on the WAN output queue. None indicates that the sending interfaces protocol priority should be used.

xRip

1.3.6.1.4.1.33.10.18

INT ripState

1.3.6.1.4.1.33.10.18.1

INTEGER

read-write

The indication of whether this system participates in RIP.

INT ripStatus

1.3.6.1.4.1.33.10.18.2

INTEGER

read-only

The status of the RIP software.

ripNetTable

1.3.6.1.4.1.33.10.18.3

not-accessible

Table of RIP entries.

ripNetEntry

1.3.6.1.4.1.33.10.18.3.1

not-accessible

A particular entry.

IP ripNetNet

1.3.6.1.4.1.33.10.18.3.1.1

IpAddress

read-only

The IP Network to which this entry applies.

INT ripNetState

1.3.6.1.4.1.33.10.18.3.1.2

INTEGER

read-write

This value controls the RIP protocol on this network.

CTR ripNetRipsIn

1.3.6.1.4.1.33.10.18.3.1.3

Counter

read-only

The number of RIP packets received from routers on this IP network.

CTR ripNetRipsOut

1.3.6.1.4.1.33.10.18.3.1.4

Counter

read-only

The number of RIP packets sent to routers on this IP network.

INT ripNetAlgorithm

1.3.6.1.4.1.33.10.18.3.1.5

INTEGER

read-write

This value controls the RIP algorithm on this network.

xlpd

1.3.6.1.4.1.33.10.19

lpdQueueTable

1.3.6.1.4.1.33.10.19.1

not-accessible

A list of lpd queues on the server.

lpdQueueEntry

1.3.6.1.4.1.33.10.19.1.1

not-accessible

Lpd parameter values plus counters for an individual lpd queue.

INT lpdQueueStatus

1.3.6.1.4.1.33.10.19.1.1.1

INTEGER

read-write

Status of this entry. Setting the value to 'invalid' invalidates the entry, corresponding directly to the CLEAR/PURGE SERVER LPD QUEUE command. Setting the value to 'valid' validates (creates) the entry, corresonding directly to the DEF/SET SERVER LPD QUEUE and lpd create commands.

STR lpdQueueName

1.3.6.1.4.1.33.10.19.1.1.2

DisplayString

read-only

Name of the LPD queue, case sensitive.

OCT lpdQueuePorts

1.3.6.1.4.1.33.10.19.1.1.3

OCTET STRING

read-write

List of ports assigned to the queue. An lpd queue can be associated with more than 1 port. This object corresponds to the port-list in the DEF/SET SERVER LPD QUEUE and lpc/create commands. The OCTET STRING contains a bitmap, with one bit for each port, and enough octets for all the ports on the system. Port numbers are as defined for charPortIndex in the Character MIB [11]. Corresponding bit numbers start with 1 as the high-order bit of the first octet.

INT lpdQueueEnabled

1.3.6.1.4.1.33.10.19.1.1.4

INTEGER

read-write

Flag indicates if the queue is enabled. A 'disabled' queue will reject print requests from remote systems. A 'enabled' queue accepts requests for printing.

INT lpdQueueLfConversion

1.3.6.1.4.1.33.10.19.1.1.5

INTEGER

read-write

Flag indicates if the queue is converting linefeeds to linefeeds, carriagereturns. 'lfcr' does the converion, 'lf' does not.

GAU lpdQueueTotalJobs

1.3.6.1.4.1.33.10.19.1.1.6

Gauge

read-only

The total number of jobs on the queue. This number should be equal to the number of active and waiting jobs. (lpdQueueActive + lpdQueueWaiting)

GAU lpdQueueActiveJobs

1.3.6.1.4.1.33.10.19.1.1.7

Gauge

read-only

The number of active jobs on the queue. An active job is a job that has been assigned a port is in the process of receiving data from a remote host and sending it out the port.

GAU lpdQueueWaitingJobs

1.3.6.1.4.1.33.10.19.1.1.8

Gauge

read-only

The number of waiting jobs on the queue. A waiting job is a job that needs a port to send its data to. This implies that the ports associated with this queue are busy.

CTR lpdQueueProcessedJobs

1.3.6.1.4.1.33.10.19.1.1.9

Counter

read-only

The total number of jobs processed by this queue since server boot.

INT lpdQueueFormFeed

1.3.6.1.4.1.33.10.19.1.1.10

INTEGER

read-write

A control to determine how we will send out a formfeed when printing a lpd job. formfeedafter: Send after job, formfeedbefore: Send before job, formfeednone: Send no formfeed.

INT lpdQueueBypass

1.3.6.1.4.1.33.10.19.1.1.11

INTEGER

read-write

Control for a queue to bypass a LPD port which has output inhibited via flow control. Corresponds directly to the value labeled 'Bypass' in the SERVER LPD QUEUE display.

lpdJobTable

1.3.6.1.4.1.33.10.19.2

not-accessible

A list of lpd jobs.

lpdJobEntry

1.3.6.1.4.1.33.10.19.2.1

not-accessible

A single lpd Job.

INT lpdJobStatus

1.3.6.1.4.1.33.10.19.2.1.1

INTEGER

read-write

Status of this entry. Setting this object to 'invalid' will remove the job from the queue. Setting this object ot 'valid' has no effect since the only way to create an lpd job is with the lpd protocol.

INT lpdJobNumber

1.3.6.1.4.1.33.10.19.2.1.2

INTEGER

read-only

The queue relative job number for this lpd job. Job numbers are assigned as jobs are accepted onto the queue. Job numbers are reset to 1 when they reach a value greater than 1000 and the queue goes empty.

INT lpdJobAssignedPort

1.3.6.1.4.1.33.10.19.2.1.3

INTEGER

read-only

The number of the port assigned to the lpd job.

INT lpdJobFileSize

1.3.6.1.4.1.33.10.19.2.1.4

INTEGER

read-only

The size of the file being sent from the remote system.

STR lpdJobHostName

1.3.6.1.4.1.33.10.19.2.1.5

DisplayString

read-only

The name of the host sending the job.

STR lpdJobFileName

1.3.6.1.4.1.33.10.19.2.1.6

DisplayString

read-only

The name of the file being sent.

INT lpdJobState

1.3.6.1.4.1.33.10.19.2.1.7

INTEGER

read-only

The current state of the lpd job. A typical job transistions through the following states: initialize->waiting->assigned->printingdata-> printingcontrol->completed.

xSecurID

1.3.6.1.4.1.33.10.20

STR securIDServerName0

1.3.6.1.4.1.33.10.20.1

DisplayString

read-write

The Domain name of the first SecurID server to try when the system verifies a SecurID PASSCODE. Corresponds directly to SERVER SECURID SERVER0 and the value labeled 'SecurID Server0:' in the SERVER SECURID display.

STR securIDServerName1

1.3.6.1.4.1.33.10.20.2

DisplayString

read-write

The Domain name of the second SecurID server to try when the system verifies a SecurID PASSCODE. Corresponds directly to SERVER SECURID SERVER1 and the value labeled 'SecurID Server1:' in the SERVER SECURID display.

STR securIDServerName2

1.3.6.1.4.1.33.10.20.3

DisplayString

read-write

The Domain name of the third SecurID server to try when the system verifies a SecurID PASSCODE. Corresponds directly to SERVER SECURID SERVER2 and the value labeled 'SecurID Server2:' in the SERVER SECURID display.

STR securIDServerName3

1.3.6.1.4.1.33.10.20.4

DisplayString

read-write

The Domain name of the fourth SecurID server to try when the system verifies a SecurID PASSCODE. Corresponds directly to SERVER SECURID SERVER3 and the value labeled 'SecurID Server3:' in the SERVER SECURID display.

STR securIDServerName4

1.3.6.1.4.1.33.10.20.5

DisplayString

read-write

The Domain name of the fifth SecurID server to try when the system verifies a SecurID PASSCODE. Corresponds directly to SERVER SECURID SERVER4 and the value labeled 'SecurID Server4:' in the SERVER SECURID display.

INT securIDMaxRetries

1.3.6.1.4.1.33.10.20.6

INTEGER

read-write

The maximum number of times the server will try any single SecurID server to validate a PASSCODE. Corresponds directly to SERVER SECURID ACMMAXRETRIES and the value labeled 'SecurID ACMMAXRETRIES:' in the SERVER SECURID display.

INT securIDBaseTimeout

1.3.6.1.4.1.33.10.20.7

INTEGER

read-write

The initial timeout value to be used between prompts for a SecurID PASSCODE. Corresponds directly to SERVER SECURID ACMBASETIMEOUT and the value labeled 'SecurID ACMBASETIMEOUT:' in the SERVER SECURID display.

INT securIDPort

1.3.6.1.4.1.33.10.20.8

INTEGER

read-write

The UDP port number to be used when communicating with the SecurID servers. Corresponds directly to SERVER SECURID ACM_PORT and the value labeled 'SecurID ACM_PORT:' in the SERVER SECURID display.

INT securIDQueryLimit

1.3.6.1.4.1.33.10.20.9

INTEGER

read-write

The maximum number of times a user will be queried for a SecurID PASSCODE before being logged out. Corresponds directly to SERVER SECURID QUERY LIMIT and the value labeled 'SecurID Query Limit:' in the SERVER SECURID display.

INT securIDEncryptionMode

1.3.6.1.4.1.33.10.20.10

INTEGER

read-write

The type of encryption to use in SecurID validation. Corresponds directly to the value labeled 'Encryption Mode' in the SERVER SECURID display.

CTR securIDInsecureLogins

1.3.6.1.4.1.33.10.20.11

Counter

read-only

The number of user logins on ports for which SecurID user verification is not enabled. Corresponds directly to the value labeled 'Logins without SecurID:' in the SERVER SECURID display.

CTR securIDSecureLogins

1.3.6.1.4.1.33.10.20.12

Counter

read-only

The number of successful user logins on ports for which SecurID user verification is enabled. Corresponds directly to the value labeled 'Successful Logins:' in the SERVER SECURID display.

CTR securIDSecureLoginsFailed

1.3.6.1.4.1.33.10.20.13

Counter

read-only

The number of verification failures due to incorrect PASSCODE for attempted user logins on ports for which SecurID user verification is enabled. Corresponds directly to the value labeled 'Unsuccessful Logins:' in the SERVER SECURID display.

CTR securIDServerAccess0

1.3.6.1.4.1.33.10.20.14

Counter

read-only

The number of times the system successfully accessed the SecurID server0. Corresponds directly to the value labeled 'Attempts to access:', 'Server0', and 'Successful:' in the SERVER SECURID display.

CTR securIDServerAccessFailed0

1.3.6.1.4.1.33.10.20.15

Counter

read-only

The number of times the system unsuccessfully accessed the SecurID server0. Corresponds directly to the value labeled 'Attempts to access:', 'Server0', and 'UnSuccessful:' in the SERVER SECURID display.

CTR securIDServerAccess1

1.3.6.1.4.1.33.10.20.16

Counter

read-only

The number of times the system successfully accessed the SecurID server1. Corresponds directly to the value labeled 'Attempts to access:', 'Server1', and 'Successful:' in the SERVER SECURID display.

CTR securIDServerAccessFailed1

1.3.6.1.4.1.33.10.20.17

Counter

read-only

The number of times the system unsuccessfully accessed the SecurID server1. Corresponds directly to the value labeled 'Attempts to access:', 'Server1', and 'UnSuccessful:' in the SERVER SECURID display.

CTR securIDServerAccess2

1.3.6.1.4.1.33.10.20.18

Counter

read-only

The number of times the system successfully accessed the SecurID server2. Corresponds directly to the value labeled 'Attempts to access:', 'Server2', and 'Successful:' in the SERVER SECURID display.

CTR securIDServerAccessFailed2

1.3.6.1.4.1.33.10.20.19

Counter

read-only

The number of times the system unsuccessfully accessed the SecurID server2. Corresponds directly to the value labeled 'Attempts to access:', 'Server2', and 'UnSuccessful:' in the SERVER SECURID display.

CTR securIDServerAccess3

1.3.6.1.4.1.33.10.20.20

Counter

read-only

The number of times the system successfully accessed the SecurID server3. Corresponds directly to the value labeled 'Attempts to access:', 'Server3', and 'Successful:' in the SERVER SECURID display.

CTR securIDServerAccessFailed3

1.3.6.1.4.1.33.10.20.21

Counter

read-only

The number of times the system unsuccessfully accessed the SecurID server3. Corresponds directly to the value labeled 'Attempts to access:', 'Server3', and 'UnSuccessful:' in the SERVER SECURID display.

CTR securIDServerAccess4

1.3.6.1.4.1.33.10.20.22

Counter

read-only

The number of times the system successfully accessed the SecurID server4. Corresponds directly to the value labeled 'Attempts to access:', 'Server4', and 'Successful:' in the SERVER SECURID display.

CTR securIDServerAccessFailed4

1.3.6.1.4.1.33.10.20.23

Counter

read-only

The number of times the system unsuccessfully accessed the SecurID server4. Corresponds directly to the value labeled 'Attempts to access:', 'Server4', and 'UnSuccessful:' in the SERVER SECURID display.

INT securIDErrorPortIndex

1.3.6.1.4.1.33.10.20.24

INTEGER

read-only

The index of the most recent port on which a SecurID access violation occurred. Corresponds directly to the value labeled 'Last Unsuccessful Login:' in the SERVER SECURID display.

INT securIDError

1.3.6.1.4.1.33.10.20.25

INTEGER

read-only

The error number of the most recent SecurID-related error. Corresponds directly to the value labeled 'Reason:' in the SERVER SECURID display. See iTouch documentation for a complete list of error numbers and their meaning.

STR securIDErrorUsername

1.3.6.1.4.1.33.10.20.26

DisplayString

read-only

The username associated with the most recent SecurID-related error. Corresponds directly to the value labeled 'Username:' in the SERVER SECURID display.

securIDPortTable

1.3.6.1.4.1.33.10.20.27

not-accessible

A list of SecurID character port entries.

securIDPortEntry

1.3.6.1.4.1.33.10.20.27.1

not-accessible

Parameter values for a SecurID port.

INT securIDPortIndex

1.3.6.1.4.1.33.10.20.27.1.1

INTEGER

read-only

An index value that uniquely identifies a port could relate to SecurID. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.

INT securIDPortStatus

1.3.6.1.4.1.33.10.20.27.1.2

INTEGER

read-write

A control indicating the level of SecurID operation on the port. Corresponds directly to PORT SECURID and the value 'SecurID' following the label 'Enabled Characteristics' in the PORT CHARACTERISTICS display.

xSsh

1.3.6.1.4.1.33.10.23

sshPortTable

1.3.6.1.4.1.33.10.23.1

not-accessible

A list of SSH port entries

sshPortEntry

1.3.6.1.4.1.33.10.23.1.1

not-accessible

Parameter values for an SSH port.

INT sshPortIndex

1.3.6.1.4.1.33.10.23.1.1.1

INTEGER

read-only

An index value that uniquely identifies an SSH port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the proposed standard Internet Character MIB.

INT sshPortIncomingTcpPort

1.3.6.1.4.1.33.10.23.1.1.2

INTEGER

read-write

Specifies the TCP port number used to identify the port when a SSH connection request arrives at the server. The default for a physical port is 2022 + 100 * port's physical port number. The default is 22 for virtual ports. Corresponds directly to the value labeled 'Remote Port:' in the PORT SSH CHARACTERISTICS display.

INT sshPortNewlineFiltering

1.3.6.1.4.1.33.10.23.1.1.3

INTEGER

read-write

Translation to apply to newline sequences (CR/NULL or CR/LF) received from the network during a SSH session, before sending the newline to the character port. The value indicates which input sequence is converted to which output sequence and sent to the character port, with 'none' meaning no translation. Corresponds directly to the value labeled 'Newline Filtering:' in the PORT SSH CHARACTERISTICS display.

INT sshPortNewline

1.3.6.1.4.1.33.10.23.1.1.4

INTEGER

read-write

Translation to apply to newline (carriage return) received from the character port during an SSH session, before sending the newline to the remote partner. Corresponds directly to the value labeled 'Newline:' in the PORT SSH CHARACTERISTICS display.

INT sshPortTransmitBufferedTime

1.3.6.1.4.1.33.10.23.1.1.5

INTEGER

read-write

Number of milliseconds to wait before transmitting data received from a character port during an interactive SSH session. Corresponds directly to the value labeled 'Transmit Buffered Time:' in the PORT SSH CHARACTERISTICS display.

INT sshPortRemoteProtocol

1.3.6.1.4.1.33.10.23.1.1.6

INTEGER

read-write

Indicates which remote protocols will be accepted at this port. Corresponds indirectly to the presence of 'Telnet' or 'SSH' under the label 'Enabled Characteristics:' in the PORT SSH CHARACTERISTICS display. If both protocols are accepted at the port, the choice of protocol is determined by which features are enabled on the server with SSH taking precedence over Telnet.

OCT sshCipherMask

1.3.6.1.4.1.33.10.23.2

OCTET STRING

read-write

This is a list of the encryption methods supported. The OCTET STRING contains a bitmap, with one bit for each cipher type. Corresponding bit numbers start with 0 as the low-order bit of the second octet. The following bit positions are defined: none(0), des(2), tripleDes(3), and blowfish(6). Corresponds directly to the value labeled 'SSH Cipher Enabled:' in the SERVER SSH CHARACTERISTICS display.

INT sshAuthenticationTimeout

1.3.6.1.4.1.33.10.23.3

INTEGER

read-write

The timeout in minutes before disconnecting if no successful authentication of SSH parties has been made. Corresponds directly to the value labeled 'Authentication Timeout:' in the SERVER SSH CHARACTERISTICS display.

INT sshHostKeyLength

1.3.6.1.4.1.33.10.23.4

INTEGER

read-write

The bit length of the SSH host encryption key. When modified, the desired change does not occur until the next system initialization. Corresponds directly to the value labeled 'Host Key Length:' in the SERVER SSH CHARACTERISTICS display.

INT sshHostKeyGenerate

1.3.6.1.4.1.33.10.23.5

INTEGER

read-write

For a set-request with a value of generate or update, a new host key will be generated in the background. When modified with generate, the desired change does not occur until the next system initialization whereas when modified with update the change goes into effect upon completion of the new key. In response to a get-request or a get-next-request the agent will respond ready except when a host key is being created in which case the agent responds generate.

INT sshServerKeyLength

1.3.6.1.4.1.33.10.23.6

INTEGER

read-write

The bit length of the SSH server encryption key. The difference between the server and host key lengths should be greater than 128 bits. Corresponds directly to the value labeled 'Server Key Length:' in the SERVER SSH CHARACTERISTICS display.

INT sshServerKeyTtl

1.3.6.1.4.1.33.10.23.7

INTEGER

read-write

The time in minutes that the server key remains valid. After this time the server key is automatically re-generated. Corresponds directly to the value labeled 'Server Key Timeout:' in the SERVER SSH CHARACTERISTICS display.

INT sshServerMaxBufferSize

1.3.6.1.4.1.33.10.23.8

INTEGER

read-write

The size of the four buffers used by SSH for input and output. These buffers are used for data coming from the console, going to the network, coming from the network and going to the console.

xEthernet

1.3.6.1.4.1.33.11

etherTable

1.3.6.1.4.1.33.11.1

not-accessible

A list of generic entries.

etherEntry

1.3.6.1.4.1.33.11.1.1

not-accessible

Generic status and parameter values for an Ethernet interface.

INT etherIndex

1.3.6.1.4.1.33.11.1.1.1

INTEGER

read-only

An index value that uniquely identifies an Ethernet interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.

CTR etherAlignmentErrors

1.3.6.1.4.1.33.11.1.1.2

Counter

read-only

A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check.

CTR etherFCSErrors

1.3.6.1.4.1.33.11.1.1.3

Counter

read-only

A count of frames received on a particular interface that are an integral number of octets in length that do not pass the FCS check.

etherTxTable

1.3.6.1.4.1.33.11.2

not-accessible

A list of Ethernet transmit entries.

etherTxEntry

1.3.6.1.4.1.33.11.2.1

not-accessible

Transmit status and parameter values for an Ethernet interface.

INT etherTxIndex

1.3.6.1.4.1.33.11.2.1.1

INTEGER

read-only

An index value that uniquely identifies an Ethernet interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.

CTR etherTxSingleCollisionFrames

1.3.6.1.4.1.33.11.2.1.2

Counter

read-only

A count of successfully transmitted frames on a particular interface for which transmission is inhibited by exactly one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts or ifOutNUcastPkts object and is not counted by the corresponding instance of the etherTxMultipleCollisionFrames object.

CTR etherTxMultipleCollisionFrames

1.3.6.1.4.1.33.11.2.1.3

Counter

read-only

A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts or ifOutNUcastPkts object and is not counted by the corresponding instance of the etherTxSingleCollisionFrames object.

etherMulticastTable

1.3.6.1.4.1.33.11.3

not-accessible

A list of etherMulticast entries.

etherMulticastEntry

1.3.6.1.4.1.33.11.3.1

not-accessible

EtherMulticast status and parameter values for an Ethernet interface.

INT etherMulticastIndex

1.3.6.1.4.1.33.11.3.1.1

INTEGER

read-only

An index value that uniquely identifies an Ethernet interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.

CTR etherMulticastBytesIn

1.3.6.1.4.1.33.11.3.1.2

Counter

read-only

A count of frames successfully received on a particular interface and for which the destination address multicast bit was set. Bytes that are counted by an instance of this object are also counted by the corresponding instance of the ifInOctets object.

CTR etherMulticastBytesOut

1.3.6.1.4.1.33.11.3.1.3

Counter

read-only

A count of successfully frames successfully transmitted on a particular interface and for which the destination address multicast bit was set. Bytes that are counted by an instance of this object are also counted by the corresponding instance of the ifOutOctets object.

etherXTxTable

1.3.6.1.4.1.33.11.4

not-accessible

A list of Ethernet extended transmit entries.

etherXTxEntry

1.3.6.1.4.1.33.11.4.1

not-accessible

Extended transmit status and parameter values for an Ethernet interface.

INT etherXTxIndex

1.3.6.1.4.1.33.11.4.1.1

INTEGER

read-only

An index value that uniquely identifies an Ethernet interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.

CTR etherXTxExcessiveCollisions

1.3.6.1.4.1.33.11.4.1.2

Counter

read-only

A count of frames for which transmission on a particular interface fails due to excessive collisions.

xDecnet

1.3.6.1.4.1.33.14

xRcp

1.3.6.1.4.1.33.14.1

OCT rcpRemoteAddress

1.3.6.1.4.1.33.14.1.1

OCTET STRING

read-only

If a remote console session exists, the Ethernet address of the remote partner, otherwise zero length.

xPhiv

1.3.6.1.4.1.33.14.2

xPhivRoute

1.3.6.1.4.1.33.14.2.1

INT phivPathSelection

1.3.6.1.4.1.33.14.2.1.1

INTEGER

read-write

The algorithm used to balance traffic between equal next hop paths. 'roundRobin' selects the next hop using a round robin algorithm for each hop. 'samePath' selects the next hop guaranteeing that all packets with the same source/destination pair will always use the same next hop.

INT phivMaxPaths

1.3.6.1.4.1.33.14.2.1.2

INTEGER

read-write

The maximum number of equal cost next hops that the router can remember and successfully load balance between.

INT phivStatus

1.3.6.1.4.1.33.14.2.1.3

INTEGER

read-only

The status of the DECnet routing software.

xPhivCircuit

1.3.6.1.4.1.33.14.2.2

phivCircuitTable

1.3.6.1.4.1.33.14.2.2.1

not-accessible

A list of DECnet circuit entries.

phivCircuitEntry

1.3.6.1.4.1.33.14.2.2.1.1

not-accessible

Parameter values for a DECnet circuit.

INT xPhivCircuitIndex

1.3.6.1.4.1.33.14.2.2.1.1.1

INTEGER

read-only

Identification of a circuit entry. Same as an interface index (ifIndex).

INT phivCircuitRoutingTimer

1.3.6.1.4.1.33.14.2.2.1.1.2

INTEGER

read-write

The maximum time in seconds allowed between Routing updates on the circuit. Different values for LANs vs. WANs.

INT phivCircuitOperCost

1.3.6.1.4.1.33.14.2.2.1.1.3

INTEGER

read-only

The actual cost associated with the circuit.

CTR phivCircuitErrors

1.3.6.1.4.1.33.14.2.2.1.1.4

Counter

read-only

The number of routed DECnet packets received in error on this circuit.

INT phivCircuitLastError

1.3.6.1.4.1.33.14.2.2.1.1.5

INTEGER

read-only

The error of the last routed DECnet packet received in error on this circuit.

DAT phivCircuitLastErrorTime

1.3.6.1.4.1.33.14.2.2.1.1.6

DateTime

read-only

The date and time that the last routed DECnet packet was received in error on this circuit.

OCT phivCircuitLastErrorData

1.3.6.1.4.1.33.14.2.2.1.1.7

OCTET STRING

read-only

The first 22 bytes of the last routed DECnet packet received in error on this circuit.

INT phivCircuitProtocolPriority

1.3.6.1.4.1.33.14.2.2.1.1.8

INTEGER

read-write

The priority at which all DECnet routed packets will be placed on the WAN output queue.

INT phivCircuitRoutingPriority

1.3.6.1.4.1.33.14.2.2.1.1.9

INTEGER

read-write

Router's priority to be designated router on this circuit.

xPhivImport

1.3.6.1.4.1.33.14.2.3

phivCircuitImportTable

1.3.6.1.4.1.33.14.2.3.1

not-accessible

A list of circuit import filter entries.

phivCircuitImportEntry

1.3.6.1.4.1.33.14.2.3.1.1

not-accessible

Parameter values for an import filter.

INT phivCircuitImportIf

1.3.6.1.4.1.33.14.2.3.1.1.1

INTEGER

read-only

The interface associated with the import routing filter.

PHI phivCircuitImportAddr

1.3.6.1.4.1.33.14.2.3.1.1.2

PhivAddr

read-only

The address (node or area) to match against learned route entries to decide whether to import the entry to the routing database.

PHI phivCircuitImportMask

1.3.6.1.4.1.33.14.2.3.1.1.3

PhivAddr

read-only

The mask which is ANDed with the address field as well as the route entries address to determine whether the address matches the route entry.

INT phivCircuitImportAction

1.3.6.1.4.1.33.14.2.3.1.1.4

INTEGER

read-write

The action to take if the address field along with the mask field matches the route entry.

INT phivCircuitImportStatus

1.3.6.1.4.1.33.14.2.3.1.1.5

INTEGER

read-write

Setting to 'invalid' removes this import filter from the table. Setting to 'valid' has no effect.

xPhivImportArea

1.3.6.1.4.1.33.14.2.4

phivCircuitImportAreaTable

1.3.6.1.4.1.33.14.2.4.1

not-accessible

A list of circuit import area filter entries.

phivCircuitImportAreaEntry

1.3.6.1.4.1.33.14.2.4.1.1

not-accessible

Parameter values for an import area filter.

INT phivCircuitImportAreaIf

1.3.6.1.4.1.33.14.2.4.1.1.1

INTEGER

read-only

The interface associated with the import area routing filter.

PHI phivCircuitImportAreaAddr

1.3.6.1.4.1.33.14.2.4.1.1.2

PhivAddr

read-only

The address (node or area) to match against learned route entries to decide whether to import the entry to the routing database.

PHI phivCircuitImportAreaMask

1.3.6.1.4.1.33.14.2.4.1.1.3

PhivAddr

read-only

The mask which is ANDed with the address field as well as the route entries address to determine whether the address matches the route entry.

INT phivCircuitImportAreaAction

1.3.6.1.4.1.33.14.2.4.1.1.4

INTEGER

read-write

The action to take if the address field along with the mask field matches the route entry.

INT phivCircuitImportAreaStatus

1.3.6.1.4.1.33.14.2.4.1.1.5

INTEGER

read-write

Setting to 'invalid' removes this import area filter from the table. Setting to 'valid' has no effect.

xPhivExport

1.3.6.1.4.1.33.14.2.5

phivCircuitExportTable

1.3.6.1.4.1.33.14.2.5.1

not-accessible

A list of circuit export filter entries.

phivCircuitExportEntry

1.3.6.1.4.1.33.14.2.5.1.1

not-accessible

Parameter values for an export filter.

INT phivCircuitExportIf

1.3.6.1.4.1.33.14.2.5.1.1.1

INTEGER

read-only

The interface associated with the export routing filter.

PHI phivCircuitExportAddr

1.3.6.1.4.1.33.14.2.5.1.1.2

PhivAddr

read-only

The address (node or area) to match against learned route entries to decide whether to export the entry to the routing database.

PHI phivCircuitExportMask

1.3.6.1.4.1.33.14.2.5.1.1.3

PhivAddr

read-only

The mask which is ANDed with the address field as well as the route entries address to determine whether the address matches the route entry.

INT phivCircuitExportAction

1.3.6.1.4.1.33.14.2.5.1.1.4

INTEGER

read-write

The action to take if the address field along with the mask field matches the route entry.

INT phivCircuitExportStatus

1.3.6.1.4.1.33.14.2.5.1.1.5

INTEGER

read-write

Setting to 'invalid' removes this export filter from the table. Setting to 'valid' has no effect.

xPhivExportArea

1.3.6.1.4.1.33.14.2.6

phivCircuitExportAreaTable

1.3.6.1.4.1.33.14.2.6.1

not-accessible

A list of circuit export area filter entries.

phivCircuitExportAreaEntry

1.3.6.1.4.1.33.14.2.6.1.1

not-accessible

Parameter values for an export area filter.

INT phivCircuitExportAreaIf

1.3.6.1.4.1.33.14.2.6.1.1.1

INTEGER

read-only

The interface associated with the export area routing filter.

PHI phivCircuitExportAreaAddr

1.3.6.1.4.1.33.14.2.6.1.1.2

PhivAddr

read-only

The address (node or area) to match against learned route entries to decide whether to export the entry to the routing database.

PHI phivCircuitExportAreaMask

1.3.6.1.4.1.33.14.2.6.1.1.3

PhivAddr

read-only

The mask which is ANDed with the address field as well as the route entries address to determine whether the address matches the route entry.

INT phivCircuitExportAreaAction

1.3.6.1.4.1.33.14.2.6.1.1.4

INTEGER

read-write

The action to take if the address field along with the mask field matches the route entry.

INT phivCircuitExportAreaStatus

1.3.6.1.4.1.33.14.2.6.1.1.5

INTEGER

read-write

Setting to 'invalid' removes this export area filter from the table. Setting to 'valid' has no effect.

xPhivFilter

1.3.6.1.4.1.33.14.2.7

phivCircuitFilterTable

1.3.6.1.4.1.33.14.2.7.1

not-accessible

A list of circuit filter entries.

phivCircuitFilterEntry

1.3.6.1.4.1.33.14.2.7.1.1

not-accessible

Parameter values for a filter.

INT phivCircuitFilterIf

1.3.6.1.4.1.33.14.2.7.1.1.1

INTEGER

read-only

The interface associated with the filter entry.

PHI phivCircuitFilterDstAddr

1.3.6.1.4.1.33.14.2.7.1.1.2

PhivAddr

read-only

The address (node or area) to match against the destination address of the packet to decide whether to forward the packet.

PHI phivCircuitFilterDstMask

1.3.6.1.4.1.33.14.2.7.1.1.3

PhivAddr

read-only

The mask which is ANDed with the destination address field and the packet's destination address to determine whether the address matches the packet's address.

PHI phivCircuitFilterSrcAddr

1.3.6.1.4.1.33.14.2.7.1.1.4

PhivAddr

read-only

The address (node or area) to match against the source address of the packet to decide whether to forward the packet.

PHI phivCircuitFilterSrcMask

1.3.6.1.4.1.33.14.2.7.1.1.5

PhivAddr

read-only

The mask which is ANDed with the source address field and the packet's source address to determine whether the address matches the packet's address.

INT phivCircuitFilterAction

1.3.6.1.4.1.33.14.2.7.1.1.6

INTEGER

read-write

The action to take if the address fields along with the mask fields match the packet.

INT phivCircuitFilterStatus

1.3.6.1.4.1.33.14.2.7.1.1.7

INTEGER

read-write

Setting to 'invalid' removes this Filter filter from the table. Setting to 'valid' has no effect.

xPhivTraffic

1.3.6.1.4.1.33.14.2.8

INT phivTrafficSort

1.3.6.1.4.1.33.14.2.8.1

INTEGER

read-write

Setting to 'execute' causes the most recent traffic information to be sorted into the phivTrafficTable. The sorting precedence is: decreasing percentage, increasing destination address, increasing source address, and increasing interface number. Setting to 'ready' has no effect.

phivTrafficTable

1.3.6.1.4.1.33.14.2.8.2

not-accessible

A list of traffic entries, sorted in the order specified by phivTrafficSort.

phivTrafficEntry

1.3.6.1.4.1.33.14.2.8.2.1

not-accessible

A traffic entry.

INT phivTrafficIndex

1.3.6.1.4.1.33.14.2.8.2.1.1

INTEGER

read-only

Identification of this traffic entry.

INT phivTrafficPercent

1.3.6.1.4.1.33.14.2.8.2.1.2

INTEGER

read-only

The percentage of total traffic that this traffic entry represents, in tenths of a percent.

PHI phivTrafficDst

1.3.6.1.4.1.33.14.2.8.2.1.3

PhivAddr

read-only

The destination to which the traffic entry applies.

PHI phivTrafficSrc

1.3.6.1.4.1.33.14.2.8.2.1.4

PhivAddr

read-only

The source to which the traffic entry applies.

INT phivTrafficIf

1.3.6.1.4.1.33.14.2.8.2.1.5

INTEGER

read-only

The inbound interface to which the traffic entry applies. This value is the same as IfIndex.

xIpx

1.3.6.1.4.1.33.15

xIpxSystem

1.3.6.1.4.1.33.15.1

INT ipxRouting

1.3.6.1.4.1.33.15.1.1

INTEGER

read-write

Control for IPX routing services.

INT ipxInternalNetwork

1.3.6.1.4.1.33.15.1.2

INTEGER

read-write

The IPX Internal Network to use on the the IPX Router.

xIpxIf

1.3.6.1.4.1.33.15.2

ipxIfTable

1.3.6.1.4.1.33.15.2.1

not-accessible

A list of IPX interface entries.

ipxIfEntry

1.3.6.1.4.1.33.15.2.1.1

not-accessible

IPX interface parameters and counters.

INT ipxIfIndex

1.3.6.1.4.1.33.15.2.1.1.1

INTEGER

read-only

An index value that uniquely identifies an IPX interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.

INT ipxIfState

1.3.6.1.4.1.33.15.2.1.1.2

INTEGER

read-write

Control for IPX routing services for this interface.

INT ipxIfNetwork

1.3.6.1.4.1.33.15.2.1.1.3

INTEGER

read-write

The IPX network number of the network to which this interface is attached.

INT ipxIfFrameStyle

1.3.6.1.4.1.33.15.2.1.1.4

INTEGER

read-write

Control for the CSMA/CD frame style to use on this interface.

CTR ipxIfFramesIn

1.3.6.1.4.1.33.15.2.1.1.5

Counter

read-only

The number of IPX frames received on this interface.

CTR ipxIfFramesOut

1.3.6.1.4.1.33.15.2.1.1.6

Counter

read-only

The number of IPX frames sent on this interface.

CTR ipxIfErrors

1.3.6.1.4.1.33.15.2.1.1.7

Counter

read-only

The number of IPX errors seen on this interface.

INT ipxIfTransitDelay

1.3.6.1.4.1.33.15.2.1.1.8

INTEGER

read-write

The number of 55 millisecond ticks it takes for a packet to travel from one destination to another on the interface. A value of 0 means that the system will calculate this value based on the measured speed of the interface.

INT ipxIfTransitDelayActual

1.3.6.1.4.1.33.15.2.1.1.9

INTEGER

read-only

The number of 55 millisecond ticks it takes for a packet to travel from one destination to another on the interface.

INT ipxIfProtocolPriority

1.3.6.1.4.1.33.15.2.1.1.10

INTEGER

read-write

This value defines the priority at which all Internet Routed packets will be placed on the WAN output queue.

INT ipxIfWatchdogSpoof

1.3.6.1.4.1.33.15.2.1.1.11

INTEGER

read-write

Control for whether or not this router responds to IPX watchog requests on this interface.

INT ipxIfStatusNetwork

1.3.6.1.4.1.33.15.2.1.1.12

INTEGER

read-only

The IPX network number that is actually in use on the attached interface. This value may have been learned via listening to the attached network.

xIpxNetbios

1.3.6.1.4.1.33.15.3

INT ipxNetbiosHopLimit

1.3.6.1.4.1.33.15.3.1

INTEGER

read-write

Maximum number of hops that an IPX Netbios packet may make.

ipxNetbiosIfTable

1.3.6.1.4.1.33.15.3.2

not-accessible

A list of IPX interface entries.

ipxNetbiosIfEntry

1.3.6.1.4.1.33.15.3.2.1

not-accessible

IPX interface parameters and counters.

INT ipxNetbiosIfIndex

1.3.6.1.4.1.33.15.3.2.1.1

INTEGER

read-only

An index value that uniquely identifies an IPX interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.

INT ipxIfNetbiosForwarding

1.3.6.1.4.1.33.15.3.2.1.2

INTEGER

read-write

Control whether Netbios packet will be forwarded in or out on this interface.

CTR ipxIfNetbiosIn

1.3.6.1.4.1.33.15.3.2.1.3

Counter

read-only

The number of IPX Netbios frames received on this interface.

CTR ipxIfNetbiosOut

1.3.6.1.4.1.33.15.3.2.1.4

Counter

read-only

The number of IPX Netbios frames sent on this interface.

xIpxRip

1.3.6.1.4.1.33.15.4

ipxRipIfTable

1.3.6.1.4.1.33.15.4.1

not-accessible

A list of IPX interface entries.

ipxRipIfEntry

1.3.6.1.4.1.33.15.4.1.1

not-accessible

IPX interface parameters and counters.

INT ipxRipIfIndex

1.3.6.1.4.1.33.15.4.1.1.1

INTEGER

read-only

An index value that uniquely identifies an IPX interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.

INT ipxIfRipBcst

1.3.6.1.4.1.33.15.4.1.1.2

INTEGER

read-write

Control whether RIP packets will be broadcasted out this interface.

INT ipxIfRipBcstDiscardTimeout

1.3.6.1.4.1.33.15.4.1.1.3

INTEGER

read-write

The number of seconds to wait before discarding information learned from a RIP broadcast.

INT ipxIfRipBcstTimer

1.3.6.1.4.1.33.15.4.1.1.4

INTEGER

read-write

The number of seconds to wait between sending out RIP broadcasts.

CTR ipxIfRipIn

1.3.6.1.4.1.33.15.4.1.1.5

Counter

read-only

The number of RIP broadcasts received on this interface.

CTR ipxIfRipOut

1.3.6.1.4.1.33.15.4.1.1.6

Counter

read-only

The number of RIP broadcasts sent on this interface.

CTR ipxIfRipAgedOut

1.3.6.1.4.1.33.15.4.1.1.7

Counter

read-only

The number of entries timed out and discarded on this interface.

ipxRipTable

1.3.6.1.4.1.33.15.4.2

not-accessible

A list of RIP entries.

ipxRipEntry

1.3.6.1.4.1.33.15.4.2.1

not-accessible

IPX interface parameters and counters.

INT ipxRipNetwork

1.3.6.1.4.1.33.15.4.2.1.1

INTEGER

read-only

An IPX network number to which this router knows a path.

OCT ipxRipRouter

1.3.6.1.4.1.33.15.4.2.1.2

OCTET STRING

read-only

The Ethernet address of an IPX router on this network.

INT ipxRipInterface

1.3.6.1.4.1.33.15.4.2.1.3

INTEGER

read-only

The interface to reach the router. A value of ifIndex.

INT ipxRipHops

1.3.6.1.4.1.33.15.4.2.1.4

INTEGER

read-only

The number of hops to reach the router.

INT ipxRipTransTime

1.3.6.1.4.1.33.15.4.2.1.5

INTEGER

read-only

The number of 55 millisecond ticks it takes for a packet to travel to the router.

INT ipxRipAge

1.3.6.1.4.1.33.15.4.2.1.6

INTEGER

read-only

The age of the RIP entry in seconds.

ipxRipRtTable

1.3.6.1.4.1.33.15.4.3

not-accessible

A list of RIP Routing entries.

ipxRipRtEntry

1.3.6.1.4.1.33.15.4.3.1

not-accessible

IPX Routing Entry information

INT ipxRipRtNetwork

1.3.6.1.4.1.33.15.4.3.1.1

INTEGER

read-only

An IPX network number to which this router knows a path.

OCT ipxRipRtRouter

1.3.6.1.4.1.33.15.4.3.1.2

OCTET STRING

read-only

The Ethernet address of an IPX router on this network.

INT ipxRipRtInterface

1.3.6.1.4.1.33.15.4.3.1.3

INTEGER

read-only

The interface to reach the router. A value of ifIndex.

INT ipxRipRtHops

1.3.6.1.4.1.33.15.4.3.1.4

INTEGER

read-write

The number of hops to reach the router.

INT ipxRipRtTransTime

1.3.6.1.4.1.33.15.4.3.1.5

INTEGER

read-write

The number of 55 millisecond ticks it takes for a packet to travel to the router.

INT ipxRipRtOrigin

1.3.6.1.4.1.33.15.4.3.1.6

INTEGER

read-only

The source of the RIP entry, either Learned via RIP or Static.

INT ipxRipRtRowStatus

1.3.6.1.4.1.33.15.4.3.1.7

INTEGER

read-write

Create or Delete RIP routing table entries.

xIpxSap

1.3.6.1.4.1.33.15.5

ipxSapIfTable

1.3.6.1.4.1.33.15.5.1

not-accessible

A list of IPX interface entries.

ipxSapIfEntry

1.3.6.1.4.1.33.15.5.1.1

not-accessible

IPX interface parameters and counters.

INT ipxSapIfIndex

1.3.6.1.4.1.33.15.5.1.1.1

INTEGER

read-only

An index value that uniquely identifies an IPX interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.

INT ipxIfSapBcst

1.3.6.1.4.1.33.15.5.1.1.2

INTEGER

read-write

Control whether SAP packets will be broadcasted out this interface.

INT ipxIfSapBcstDiscardTimeout

1.3.6.1.4.1.33.15.5.1.1.3

INTEGER

read-write

The number of seconds to wait before discarding information learned from a SAP broadcast.

INT ipxIfSapBcstTimer

1.3.6.1.4.1.33.15.5.1.1.4

INTEGER

read-write

The number of seconds to wait between sending out SAP broadcasts.

CTR ipxIfSapIn

1.3.6.1.4.1.33.15.5.1.1.5

Counter

read-only

The number SAP broadcasts received on this interface.

CTR ipxIfSapOut

1.3.6.1.4.1.33.15.5.1.1.6

Counter

read-only

The number SAP broadcasts sent on this interface.

CTR ipxIfSapAgedOut

1.3.6.1.4.1.33.15.5.1.1.7

Counter

read-only

The number entries for this interface discarded due to aging timeout.

ipxSapTable

1.3.6.1.4.1.33.15.5.2

not-accessible

A list of SAP entries.

ipxSapEntry

1.3.6.1.4.1.33.15.5.2.1

not-accessible

IPX interface parameters and counters.

STR ipxSapName

1.3.6.1.4.1.33.15.5.2.1.1

DisplayString

read-only

The name of the service, null filled.

INT ipxSapNetwork

1.3.6.1.4.1.33.15.5.2.1.2

INTEGER

read-only

The IPX network number on which the service's host resides.

OCT ipxSapHost

1.3.6.1.4.1.33.15.5.2.1.3

OCTET STRING

read-only

The Ethernet address of the IPX host of the service.

INT ipxSapSocket

1.3.6.1.4.1.33.15.5.2.1.4

INTEGER

read-only

The socket number of the service on the host.

INT ipxSapInterface

1.3.6.1.4.1.33.15.5.2.1.5

INTEGER

read-only

The interface of the router in the direction of the service. A value of ifIndex.

INT ipxSapType

1.3.6.1.4.1.33.15.5.2.1.6

INTEGER

read-only

The type of the service. The enumeration is an incomplete set of all possible values.

INT ipxSapAge

1.3.6.1.4.1.33.15.5.2.1.7

INTEGER

read-only

The age of the Sap entry in seconds.

ipxSapSvTable

1.3.6.1.4.1.33.15.5.3

not-accessible

A list of SAP entries.

ipxSapSvEntry

1.3.6.1.4.1.33.15.5.3.1

not-accessible

IPX interface parameters and counters.

STR ipxSapSvName

1.3.6.1.4.1.33.15.5.3.1.1

DisplayString

read-only

The name of the service.

INT ipxSapSvNetwork

1.3.6.1.4.1.33.15.5.3.1.2

INTEGER

read-only

The IPX network number on which the service's host resides.

OCT ipxSapSvHost

1.3.6.1.4.1.33.15.5.3.1.3

OCTET STRING

read-only

The Ethernet address of the IPX host of the service.

INT ipxSapSvSocket

1.3.6.1.4.1.33.15.5.3.1.4

INTEGER

read-only

The socket number of the service on the host.

INT ipxSapSvInterface

1.3.6.1.4.1.33.15.5.3.1.5

INTEGER

read-only

The interface of the router in the direction of the service. A value of ifIndex.

INT ipxSapSvOrigin

1.3.6.1.4.1.33.15.5.3.1.6

INTEGER

read-only

The source of the RIP entry, either Learned via RIP or Static.

INT ipxSapSvType

1.3.6.1.4.1.33.15.5.3.1.7

INTEGER

read-only

The type of the service. The enumeration is an incomplete set of all possible values.

INT ipxSapSvHops

1.3.6.1.4.1.33.15.5.3.1.8

INTEGER

read-write

The number of hops to the Service.

INT ipxSapSvRowStatus

1.3.6.1.4.1.33.15.5.3.1.9

INTEGER

read-write

Create or Delete SAP Service table entries.

INT ipxSapSvAge

1.3.6.1.4.1.33.15.5.3.1.10

INTEGER

read-only

The age of the Sap entry in seconds.

xIpxFilter

1.3.6.1.4.1.33.15.6

ipxIfFilterTable

1.3.6.1.4.1.33.15.6.1

not-accessible

A list of IPX interface Source and Destination address Filter entries.

ipxIfFilterEntry

1.3.6.1.4.1.33.15.6.1.1

not-accessible

IPX Source and Destination interface Filters.

INT ipxIfFilterIndex

1.3.6.1.4.1.33.15.6.1.1.1

INTEGER

read-only

The interface to which this IPX Address filter applies. A value of ifIndex.

INT ipxIfFilterDestNetwork

1.3.6.1.4.1.33.15.6.1.1.2

INTEGER

read-only

The destination IPX network to be filtered.

OCT ipxIfFilterDestNode

1.3.6.1.4.1.33.15.6.1.1.3

OCTET STRING

read-only

The destination IPX node to be filtered.

INT ipxIfFilterSourceNetwork

1.3.6.1.4.1.33.15.6.1.1.4

INTEGER

read-only

The destination IPX network to be filtered.

OCT ipxIfFilterSourceNode

1.3.6.1.4.1.33.15.6.1.1.5

OCTET STRING

read-only

The destination IPX node to be filtered.

INT ipxIfFilterPacketType

1.3.6.1.4.1.33.15.6.1.1.6

INTEGER

read-only

The IPX packet type to be filtered.

INT ipxIfFilterAction

1.3.6.1.4.1.33.15.6.1.1.7

INTEGER

read-write

The IPX filter action to be taken, either Forward or Discard.

INT ipxIfFilterRowStatus

1.3.6.1.4.1.33.15.6.1.1.8

INTEGER

read-write

The IPX Filter create or delete function.

INT ipxIfFilterStatusDestNetworkAll

1.3.6.1.4.1.33.15.6.1.1.9

INTEGER

read-only

The IPX Filter flag meaning ALL destination networks.

INT ipxIfFilterStatusDestNodeAll

1.3.6.1.4.1.33.15.6.1.1.10

INTEGER

read-only

The IPX Filter flag meaning ALL destination nodes.

INT ipxIfFilterStatusSourceNetworkAll

1.3.6.1.4.1.33.15.6.1.1.11

INTEGER

read-only

The IPX Filter flag meaning ALL source networks.

INT ipxIfFilterStatusSourceNodeAll

1.3.6.1.4.1.33.15.6.1.1.12

INTEGER

read-only

The IPX Filter flag meaning ALL source nodes.

INT ipxIfFilterStatusPacketTypeAll

1.3.6.1.4.1.33.15.6.1.1.13

INTEGER

read-only

The IPX Filter flag meaning ALL packet types.

ipxIfRipFilterTable

1.3.6.1.4.1.33.15.6.2

not-accessible

A list of IPX interface RIP Filter entries.

ipxIfRipFilterEntry

1.3.6.1.4.1.33.15.6.2.1

not-accessible

IPX RIP interface Filters.

INT ipxIfRipFilterNetwork

1.3.6.1.4.1.33.15.6.2.1.1

INTEGER

read-only

The IPX RIP network to be filtered.

INT ipxIfRipFilterType

1.3.6.1.4.1.33.15.6.2.1.2

INTEGER

read-only

The IPX RIP filter type, either IMPORT or EXPORT.

INT ipxIfRipFilterAction

1.3.6.1.4.1.33.15.6.2.1.3

INTEGER

read-write

The IPX RIP filter action to be taken, either ALLOW or DENY.

INT ipxIfRipFilterRowStatus

1.3.6.1.4.1.33.15.6.2.1.4

INTEGER

read-write

The IPX RIP Filter create or delete function.

INT ipxIfRipFilterNetworkAll

1.3.6.1.4.1.33.15.6.2.1.5

INTEGER

read-only

The IPX RIP Filter flag meaning filter ALL networks.

OCT ipxIfRipFilterHost

1.3.6.1.4.1.33.15.6.2.1.6

OCTET STRING

read-only

The RIP Filter IPX Host Address from which RIP will ALLOW/DENY IMPORT of routes.

ipxIfSapFilterTable

1.3.6.1.4.1.33.15.6.3

not-accessible

A list of IPX interface SAP Filter entries.

ipxIfSapFilterEntry

1.3.6.1.4.1.33.15.6.3.1

not-accessible

IPX SAP interface Filters.

INT ipxIfSapFilterNetwork

1.3.6.1.4.1.33.15.6.3.1.1

INTEGER

read-only

The IPX SAP network to be filtered.

INT ipxIfSapFilterType

1.3.6.1.4.1.33.15.6.3.1.2

INTEGER

read-only

The IPX SAP filter type, either IMPORT or EXPORT.

INT ipxIfSapFilterServiceType

1.3.6.1.4.1.33.15.6.3.1.3

INTEGER

read-only

The IPX SAP service type to which this filter applies.

INT ipxIfSapFilterAction

1.3.6.1.4.1.33.15.6.3.1.4

INTEGER

read-write

The IPX SAP filter action to be taken, either ALLOW or DENY.

INT ipxIfSapFilterRowStatus

1.3.6.1.4.1.33.15.6.3.1.5

INTEGER

read-write

The IPX SAP Filter create or delete function.

INT ipxIfSapFilterNetworkAll

1.3.6.1.4.1.33.15.6.3.1.6

INTEGER

read-only

The IPX SAP Filter flag meaning filter ALL networks.

INT ipxIfSapFilterServiceTypeAll

1.3.6.1.4.1.33.15.6.3.1.7

INTEGER

read-only

The IPX SAP Filter flag meaning filter ALL service types.

STR ipxIfSapFilterName

1.3.6.1.4.1.33.15.6.3.1.8

DisplayString

read-only

The name of the service to be filtered.

OCT ipxIfSapFilterHost

1.3.6.1.4.1.33.15.6.3.1.9

OCTET STRING

read-only

The IPX Host address from which SAP will ALLOW/DENY IMPORT of services .

xIpxPrinter

1.3.6.1.4.1.33.15.8

ipxPrinterPortTable

1.3.6.1.4.1.33.15.8.1

not-accessible

A list of IPX printer character port entries.

ipxPrinterPortEntry

1.3.6.1.4.1.33.15.8.1.1

not-accessible

IPX printer parameter values for a character port.

INT ipxPrinterPortIndex

1.3.6.1.4.1.33.15.8.1.1.1

INTEGER

read-only

An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.

INT ipxPrinterPortStatus

1.3.6.1.4.1.33.15.8.1.1.2

INTEGER

read-write

Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table.

STR ipxPrinterPortServer

1.3.6.1.4.1.33.15.8.1.1.3

DisplayString

read-write

The name of an active print server on the network.

INT ipxPrinterPortPrinter

1.3.6.1.4.1.33.15.8.1.1.4

INTEGER

read-write

An available remote printer on ixpPrinterPortServer.

INT ipxTimeout

1.3.6.1.4.1.33.15.8.1.1.5

INTEGER

read-write

A control to set the the time at which a print job from a print server will be timed out and the port freed.

INT ipxPrinterEthernet

1.3.6.1.4.1.33.15.8.2

INTEGER

read-write

Control for use of Ethernet-style message framing, with the IPX protocol type. Mutually exclusive with ipxPrinterMac, ipxPrinterMac802_2_Snap, and ipxPrinterMac802_2.

INT ipxPrinterMac

1.3.6.1.4.1.33.15.8.3

INTEGER

read-write

Control for use of MAC-only message framing, with no protocol type. Mutually exclusive with ipxPrinterEthernet, ipxPrinterMac802_2_Snap, and ipxPrinterMac802_2.

INT ipxPrinterMac802_2

1.3.6.1.4.1.33.15.8.4

INTEGER

read-write

Control for use of MAC message framing with 802.2 framing. Mutually exclusive with ipxPrinterEthernet, ipxPrinterMac, and ipxPrinterMac802_2_Snap.

INT ipxPrinterMac802_2_Snap

1.3.6.1.4.1.33.15.8.5

INTEGER

read-write

Control for use of MAC-only message framing with 802 Snap framing. Mutually exclusive with ipxPrinterEthernet, ipxPrinterMac, and ipxPrinterMac802_2.

xChassis

1.3.6.1.4.1.33.16

xChassisBasic

1.3.6.1.4.1.33.16.1

MAC basicBase802Address

1.3.6.1.4.1.33.16.1.1

MacAddress

read-only

Base IEEE 802 global address for the chassis.

INT basicSlot

1.3.6.1.4.1.33.16.1.2

INTEGER

read-only

Chassis slot number (slotIndex) of the system whose agent is supplying this MIB.

INT basicSlotNumber

1.3.6.1.4.1.33.16.1.3

INTEGER

read-only

Number of slots in the chassis.

MAC basicNewBase802Address

1.3.6.1.4.1.33.16.1.4

MacAddress

read-write

New base IEEE 802 global address for the chassis. Must be set in conjunction with featType 'changeEthernetAddress' and featKey from the ITouch System MIB.

xSegment

1.3.6.1.4.1.33.16.2

segmentTable

1.3.6.1.4.1.33.16.2.1

not-accessible

A list of segment entries, one for each segment of each type on the chassis.

segmentEntry

1.3.6.1.4.1.33.16.2.1.1

not-accessible

Values for a chassis segment.

NET segmentType

1.3.6.1.4.1.33.16.2.1.1.1

NetworkType

read-only

The segment type.

LET segmentIndex

1.3.6.1.4.1.33.16.2.1.1.2

Letter

read-only

An index value that uniquely identifies a segment.

xPort

1.3.6.1.4.1.33.16.3

IOT portIOCardType

1.3.6.1.4.1.33.16.3.1

IOType

read-only

The hardware type of the I/O card in this slot.

SER portIOCardSerialNumber

1.3.6.1.4.1.33.16.3.2

SerialNumber

read-only

The ITouch serial number of the I/O card in this slot.

INT portIOCardOperStatus

1.3.6.1.4.1.33.16.3.3

INTEGER

read-only

Status of the I/O card relative to the function card in this slot.

portTable

1.3.6.1.4.1.33.16.3.4

not-accessible

A list of port entries, one for each port of each type on the slots I/O card.

portEntry

1.3.6.1.4.1.33.16.3.4.1

not-accessible

Values for an I/O card port.

NET portType

1.3.6.1.4.1.33.16.3.4.1.1

NetworkType

read-only

The port type.

INT portIndex

1.3.6.1.4.1.33.16.3.4.1.2

INTEGER

read-only

An index value that uniquely identifies a port.

xController

1.3.6.1.4.1.33.16.4

controllerTable

1.3.6.1.4.1.33.16.4.1

not-accessible

A list of controller entries, one for each controller of each type on the local system.

controllerEntry

1.3.6.1.4.1.33.16.4.1.1

not-accessible

Values for a controller.

NET controllerType

1.3.6.1.4.1.33.16.4.1.1.1

NetworkType

read-only

The controller type.

INT controllerIndex

1.3.6.1.4.1.33.16.4.1.1.2

INTEGER

read-only

An index value that uniquely identifies a controller.

OID controllerNetwork

1.3.6.1.4.1.33.16.4.1.1.3

OBJECT IDENTIFIER

read-write

The instance identifier of the first object in the conceptual row entry for the segment, port, or controller this controller is to use, that is, segmentType, portType or controllerType.

xInterface

1.3.6.1.4.1.33.16.5

interfaceTable

1.3.6.1.4.1.33.16.5.1

not-accessible

A list of interface entries, corresponding to the MIB II Interface group. These are directly equivalent to hardware network controllers, and must be the lowest numbered interfaces on the system.

interfaceEntry

1.3.6.1.4.1.33.16.5.1.1

not-accessible

Values for an interface.

INT interfaceIndex

1.3.6.1.4.1.33.16.5.1.1.1

INTEGER

read-only

An index value that uniquely identifies an interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.

OID interfaceNetwork

1.3.6.1.4.1.33.16.5.1.1.2

OBJECT IDENTIFIER

read-write

The instance identifier of the first object in the conceptual row entry for the segment, port, or controller this interface is to use, that is, segmentType, portType, or controllerType.

xSlotBootControl

1.3.6.1.4.1.33.16.6

slotBootControlTable

1.3.6.1.4.1.33.16.6.1

not-accessible

A list of slot boot control entries.

slotBootControlEntry

1.3.6.1.4.1.33.16.6.1.1

not-accessible

Values for a chassis slot.

INT slotBootControlSlot

1.3.6.1.4.1.33.16.6.1.1.1

INTEGER

read-only

An index value that uniquely identifies a slot, defined the same as slotIndex.

INT slotBootControlIndex

1.3.6.1.4.1.33.16.6.1.1.2

INTEGER

read-only

An index value that uniquely identifies a boot control entry, from 1 to the number of entries for the slot.

INT slotBootControlStatus

1.3.6.1.4.1.33.16.6.1.1.3

INTEGER

read-write

The status of the entry. Set to 'disabled' to disable the entry.

OID slotBootControlController

1.3.6.1.4.1.33.16.6.1.1.4

OBJECT IDENTIFIER

read-write

The instance identifier of the first object in the conceptual row entry for the controller this entry selects for bootstrap operation, that is, controllerType. This entry must be compatible with slotBootControlNetwork, including being of the same network type. The value 0.0 indicates default action.

OID slotBootControlNetwork

1.3.6.1.4.1.33.16.6.1.1.5

OBJECT IDENTIFIER

read-write

The instance identifier of the first object in the conceptual row entry for the segment or port this entry selects for bootstrap operation, that is, segmentType or portType. This entry must be compatible with slotBootControlController, including being of the same network type. The value 0.0 indicates default action.

STR slotBootControlMopFile

1.3.6.1.4.1.33.16.6.1.1.6

DisplayString

read-write

The software file name to request for down-line load of the server via MOP or XMOP.

STR slotBootControlInternetFile

1.3.6.1.4.1.33.16.6.1.1.7

DisplayString

read-write

The filename to request when loading an image via TFTP.

IP slotBootControlInternetAddress

1.3.6.1.4.1.33.16.6.1.1.8

IpAddress

read-write

The internet address of the system is to use for itself when loading via TFTP. The value 0.0.0.0 indicates default action.

IP slotBootControlInternetServer

1.3.6.1.4.1.33.16.6.1.1.9

IpAddress

read-write

The internet address of the server to use when loading an image via TFTP. The value 0.0.0.0 indicates default action.

IP slotBootControlInternetGateway

1.3.6.1.4.1.33.16.6.1.1.10

IpAddress

read-write

The internet address of the gateway to use when loading an image via TFTP. The value 0.0.0.0 indicates default action.

STR slotBootControlInternetDelimiter

1.3.6.1.4.1.33.16.6.1.1.11

DisplayString

read-write

The character separating the load file directory name from the file name.

slotBootControlFlagTable

1.3.6.1.4.1.33.16.6.2

not-accessible

A list of slot boot control source flag entries.

slotBootControlFlagEntry

1.3.6.1.4.1.33.16.6.2.1

not-accessible

Values for a boot control flag.

INT slotBootControlFlagLoadBootpTftp

1.3.6.1.4.1.33.16.6.2.1.1

INTEGER

read-write

Control for performing load over BOOTP/TFTP.

INT slotBootControlFlagParamBootpTftp

1.3.6.1.4.1.33.16.6.2.1.2

INTEGER

read-write

Control for performing parameter load over BOOTP/TFTP.

INT slotBootControlFlagDumpBootpTftp

1.3.6.1.4.1.33.16.6.2.1.3

INTEGER

read-write

Control for performing dump over BOOTP/TFTP.

INT slotBootControlFlagLoadTftpDirect

1.3.6.1.4.1.33.16.6.2.1.4

INTEGER

read-write

Control for performing load over direct TFTP.

INT slotBootControlFlagParamTftpDirect

1.3.6.1.4.1.33.16.6.2.1.5

INTEGER

read-write

Control for performing parameter load over direct TFTP.

INT slotBootControlFlagDumpTftpDirect

1.3.6.1.4.1.33.16.6.2.1.6

INTEGER

read-write

Control for performing dump over direct TFTP.

INT slotBootControlFlagLoadLocal

1.3.6.1.4.1.33.16.6.2.1.7

INTEGER

read-write

Control for performing load from a local device.

INT slotBootControlFlagParamLocal

1.3.6.1.4.1.33.16.6.2.1.8

INTEGER

read-write

Control for performing parameter load from a local device.

INT slotBootControlFlagDumpLocal

1.3.6.1.4.1.33.16.6.2.1.9

INTEGER

read-write

Control for performing dump from a local device.

INT slotBootControlFlagLoadMop

1.3.6.1.4.1.33.16.6.2.1.10

INTEGER

read-write

Control for performing load over Digital's MOP.

INT slotBootControlFlagParamMop

1.3.6.1.4.1.33.16.6.2.1.11

INTEGER

read-write

Control for performing parameter load over Digital's MOP.

INT slotBootControlFlagDumpMop

1.3.6.1.4.1.33.16.6.2.1.12

INTEGER

read-write

Control for performing dump over Digital's MOP.

INT slotBootControlFlagLoadXmop

1.3.6.1.4.1.33.16.6.2.1.13

INTEGER

read-write

Control for performing load over ITouch extended MOP.

INT slotBootControlFlagParamXmop

1.3.6.1.4.1.33.16.6.2.1.14

INTEGER

read-write

Control for performing parameter load over ITouch extended MOP.

INT slotBootControlFlagDumpXmop

1.3.6.1.4.1.33.16.6.2.1.15

INTEGER

read-write

Control for performing dump over ITouch extended MOP.

INT slotBootControlFlagLoadRarpTftp

1.3.6.1.4.1.33.16.6.2.1.16

INTEGER

read-write

Control for performing load over RARP/TFTP.

INT slotBootControlFlagParamRarpTftp

1.3.6.1.4.1.33.16.6.2.1.17

INTEGER

read-write

Control for performing parameter load over RARP/TFTP.

INT slotBootControlFlagDumpRarpTftp

1.3.6.1.4.1.33.16.6.2.1.18

INTEGER

read-write

Control for performing dump over RARP/TFTP.

slotBootControlStorageTable

1.3.6.1.4.1.33.16.6.3

not-accessible

A list of slot boot control Storage entries.

slotBootControlStorageEntry

1.3.6.1.4.1.33.16.6.3.1

not-accessible

Values for a chassis slot.

INT slotBootControlStorageClientSlot

1.3.6.1.4.1.33.16.6.3.1.1

INTEGER

read-only

An index value that uniquely identifies a slot, defined the same as slotIndex.

INT slotBootControlStorageServerSlot

1.3.6.1.4.1.33.16.6.3.1.2

INTEGER

read-only

An index value that uniquely identifies the slot in which the Storage record resides, with the same values as slotIndex.

INT slotBootControlStorageStatus

1.3.6.1.4.1.33.16.6.3.1.3

INTEGER

read-only

The status of the entry.

CTR slotBootControlStorageFailures

1.3.6.1.4.1.33.16.6.3.1.4

Counter

read-only

The number of times a read from or write to a given Storage location failed

xSlot

1.3.6.1.4.1.33.16.7

slotTable

1.3.6.1.4.1.33.16.7.1

not-accessible

A list of slot entries.

slotEntry

1.3.6.1.4.1.33.16.7.1.1

not-accessible

Values for a chassis slot.

INT slotIndex

1.3.6.1.4.1.33.16.7.1.1.1

INTEGER

read-only

An index value that uniquely identifies a slot, in the range 0 to basicSlotNumber, where the value 0 indicates the same slot as basicSlot. As the objects found at instance zero are duplicates, that instance does not appear in responses a get-next, that is, the lowest numbered slotIndex returned by get-next is 1.

INT slotAdminAction

1.3.6.1.4.1.33.16.7.1.1.2

INTEGER

read-write

Control to cause reset of the system in a slot. When read, the value is always 'ready'. Setting to 'reset' or 'resetHold' causes a single attempt to take that action, but does not ensure transition to any particular value of slotOperStatus.

INT slotOperStatus

1.3.6.1.4.1.33.16.7.1.1.3

INTEGER

read-only

Relative to the chassis, the current operating status of the system in the slot.

GAU slotSecondsSinceReset

1.3.6.1.4.1.33.16.7.1.1.4

Gauge

read-only

The number of seconds since the system in the slot was last reset by hardware or software.

HAR slotHardwareType

1.3.6.1.4.1.33.16.7.1.1.5

HardwareType

read-only

The type of hardware in the slot.

SER slotHardwareSerialNumber

1.3.6.1.4.1.33.16.7.1.1.6

SerialNumber

read-only

The ITouch serial number of the function card hardware in this slot.

INT slotHardwareRevision

1.3.6.1.4.1.33.16.7.1.1.7

INTEGER

read-only

This revision level of the function card hardware in the slot.

IOT slotIOCardType

1.3.6.1.4.1.33.16.7.1.1.8

IOType

read-only

The hardware type of the I/O card in this slot.

SER slotIOCardSerialNumber

1.3.6.1.4.1.33.16.7.1.1.9

SerialNumber

read-only

The ITouch serial number of the I/O card in this slot.

INT slotIOCardOperStatus

1.3.6.1.4.1.33.16.7.1.1.10

INTEGER

read-only

Status of the I/O card relative to the function card in this slot.

INT slotBootstrapFirmwareRevision

1.3.6.1.4.1.33.16.7.1.1.11

INTEGER

read-only

The firmware revision level of the bootstrap ROM installed in the system in the slot.

INT slotElementalFirmwareRevision

1.3.6.1.4.1.33.16.7.1.1.12

INTEGER

read-only

The firmware revision level of the minimal function ROM (management bus microprocessor) installed in the system in the slot.

INT slotMemorySize

1.3.6.1.4.1.33.16.7.1.1.13

INTEGER

read-only

The number of bytes of memory installed in the system in the slot.

GAU slotLedNumber

1.3.6.1.4.1.33.16.7.1.1.14

Gauge

read-only

The number of LEDs on the system in the slot. A value of 0 indicates none, unknown, or status not readable.

OCT slotLedStatus

1.3.6.1.4.1.33.16.7.1.1.15

OCTET STRING

read-only

The status of the LEDs displayed on the front and back of the system in the slot. The first bit is the high-order bit of the first byte of the value, proceeding to the low-order bit, then to then next byte. On the system hardware, the first LED is at the top, left, front, proceeding left to right, top to bottom, and front to back.

MAC slotBase802Address

1.3.6.1.4.1.33.16.7.1.1.16

MacAddress

read-only

Base IEEE 802 global address for the slot.

IP slotIpAddress

1.3.6.1.4.1.33.16.7.1.1.17

IpAddress

read-only

An internet address to which the system in this slot might respond. May be one of many.

INT slotPlus5Status

1.3.6.1.4.1.33.16.7.1.1.18

INTEGER

read-only

Status of the +5 volt power to the slot.

INT slotPlus12Status

1.3.6.1.4.1.33.16.7.1.1.19

INTEGER

read-only

Status of the +12 volt power to the slot.

INT slotMinus12Status

1.3.6.1.4.1.33.16.7.1.1.20

INTEGER

read-only

Status of the -12 volt power to the slot.

GAU slotPlus5Watts

1.3.6.1.4.1.33.16.7.1.1.21

Gauge

read-only

Tenths of watts of +5 volt power currently drawn by the slot.

GAU slotPlus12Watts

1.3.6.1.4.1.33.16.7.1.1.22

Gauge

read-only

Tenths of watts of +12 volt power currently drawn by the slot.

GAU slotMinus12Watts

1.3.6.1.4.1.33.16.7.1.1.23

Gauge

read-only

Tenths of watts of -12 volt power currently drawn by the slot.

INT slotIOCardHardwareVersion

1.3.6.1.4.1.33.16.7.1.1.24

INTEGER

read-only

Version number of I/O card in the slot.

INT slotRestoreNVS

1.3.6.1.4.1.33.16.7.1.1.25

INTEGER

read-write

Setting to 'execute' causes the non-volatile parameter storage to be restored from an installed memory card. Setting to 'ready' has no effect.

INT slotDefaultNVS

1.3.6.1.4.1.33.16.7.1.1.26

INTEGER

read-write

Setting to 'execute' causes non-volatile stored parameters to be reset to factory defaults. Setting to 'ready' has no effect.

slotBootTable

1.3.6.1.4.1.33.16.7.2

not-accessible

A list of slot bootstrap status entries. A given slot has an entry in this table only when slotOperStatus is one of: loadRequested, loading, dumpRequested, dumping, paramRequested, paramLoading

slotBootEntry

1.3.6.1.4.1.33.16.7.2.1

not-accessible

Bootstrap status values for a chassis slot.

INT slotBootIndex

1.3.6.1.4.1.33.16.7.2.1.1

INTEGER

read-only

An index value that uniquely identifies a slot, defined the same as slotIndex.

INT slotBootIfIndex

1.3.6.1.4.1.33.16.7.2.1.2

INTEGER

read-only

An index value that uniquely identifies the interface in use for bootstrap functions. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.

OID slotBootNetwork

1.3.6.1.4.1.33.16.7.2.1.3

OBJECT IDENTIFIER

read-only

The instance identifier of the first object in the conceptual row entry for the segment or port this interface is using, that is, segmentType or portType.

INT slotBootProtocol

1.3.6.1.4.1.33.16.7.2.1.4

INTEGER

read-only

The protocol in use for bootstrap operation.

MAC slotBoot802Address

1.3.6.1.4.1.33.16.7.2.1.5

MacAddress

read-only

IEEE 802 global address in use for bootstrap operation.

ADR slotBootAddressType

1.3.6.1.4.1.33.16.7.2.1.6

AddressType

read-only

The type of network address contained in slotBootAddress.

OCT slotBootAddress

1.3.6.1.4.1.33.16.7.2.1.7

OCTET STRING

read-only

The network address the system in the slot is using to identify itself for bootstrap operation.

ADR slotBootServerAddressType

1.3.6.1.4.1.33.16.7.2.1.8

AddressType

read-only

The type of network address contained in slotBootServerAddress.

OCT slotBootServerAddress

1.3.6.1.4.1.33.16.7.2.1.9

OCTET STRING

read-only

The network address of the system supplying bootstrap services to the system in the slot.

IP slotBootGatewayAddress

1.3.6.1.4.1.33.16.7.2.1.10

IpAddress

read-only

The internet address of the router in use for bootstrap operation.

STR slotBootFileName

1.3.6.1.4.1.33.16.7.2.1.11

DisplayString

read-only

The full name of the file in use for bootstrap operation.

GAU slotBootBlockNumber

1.3.6.1.4.1.33.16.7.2.1.12

Gauge

read-only

The current block number being transferred for bootstrap operation, zero if unknown or not applicable.

OCT slotBootCrashCode

1.3.6.1.4.1.33.16.7.2.1.13

OCTET STRING

read-only

If slotOperStatus is dumpRequested or dumping, a code number to identify the crash reason; otherwise zero length.

slotControllerTable

1.3.6.1.4.1.33.16.7.3

not-accessible

A list of controller entries, one for each controller of each type in each slot.

slotControllerEntry

1.3.6.1.4.1.33.16.7.3.1

not-accessible

Values for a controller.

NET slotControllerType

1.3.6.1.4.1.33.16.7.3.1.1

NetworkType

read-only

The controller type.

INT slotControllerIndex

1.3.6.1.4.1.33.16.7.3.1.2

INTEGER

read-only

An index value that uniquely identifies a controller.

OID slotControllerNetwork

1.3.6.1.4.1.33.16.7.3.1.3

OBJECT IDENTIFIER

read-only

The instance identifier of the first object in the conceptual row entry for the segment or port this controller is to use, that is, segmentType or portType.

xPowerSupply

1.3.6.1.4.1.33.16.8

powerSupplyTable

1.3.6.1.4.1.33.16.8.1

not-accessible

A list of power supply entries.

powerSupplyEntry

1.3.6.1.4.1.33.16.8.1.1

not-accessible

Values for a chassis power supply.

INT powerSupplyIndex

1.3.6.1.4.1.33.16.8.1.1.1

INTEGER

read-only

An index value that uniquely identifies a power supply, in the range 1 to the number of power supply slots in the chassis.

INT powerSupplyAdminAction

1.3.6.1.4.1.33.16.8.1.1.2

INTEGER

read-write

Control to cause reset of the power supply. When read, the value is always 'ready'. Setting to 'reset' or 'resetHold' causes a single attempt to take that action, but does not ensure transition to any particular value of powerSupplyRedundancyStatus.

INT powerSupplyFirmwareVersion

1.3.6.1.4.1.33.16.8.1.1.3

INTEGER

read-only

Version number of power supply firmware.

INT powerSupplyRedundancyStatus

1.3.6.1.4.1.33.16.8.1.1.4

INTEGER

read-only

The current redundancy status of the power supply.

INT powerSupplyPlus5Status

1.3.6.1.4.1.33.16.8.1.1.5

INTEGER

read-only

Status of the +5 volt power from the power supply.

INT powerSupplyPlus12Status

1.3.6.1.4.1.33.16.8.1.1.6

INTEGER

read-only

Status of the +12 volt power from the power supply.

INT powerSupplyMinus12Status

1.3.6.1.4.1.33.16.8.1.1.7

INTEGER

read-only

Status of the -12 volt power from the power supply.

INT powerSupplyThermalWarningStatus

1.3.6.1.4.1.33.16.8.1.1.8

INTEGER

read-only

The current thermal warning status of the power supply.

INT powerSupplyThermalShutdownStatus

1.3.6.1.4.1.33.16.8.1.1.9

INTEGER

read-only

The current thermal shutdown status of the power supply.

INT powerSupplyFanStatus

1.3.6.1.4.1.33.16.8.1.1.10

INTEGER

read-only

The current status of the power supply's fan.

INT powerSupplyHardwareInhibitStatus

1.3.6.1.4.1.33.16.8.1.1.11

INTEGER

read-only

The current status of the power supply's hardware inhibit.

INT powerSupplyPlus5History

1.3.6.1.4.1.33.16.8.1.1.12

INTEGER

read-only

History of the +5 volt power from the power supply.

INT powerSupplyPlus12History

1.3.6.1.4.1.33.16.8.1.1.13

INTEGER

read-only

History of the +12 volt power from the power supply.

INT powerSupplyMinus12History

1.3.6.1.4.1.33.16.8.1.1.14

INTEGER

read-only

History of the -12 volt power from the power supply.

INT powerSupplyThermalWarningHistory

1.3.6.1.4.1.33.16.8.1.1.15

INTEGER

read-only

The thermal warning history of the power supply.

INT powerSupplyThermalShutdownHistory

1.3.6.1.4.1.33.16.8.1.1.16

INTEGER

read-only

The thermal shutdown history of the power supply.

INT powerSupplyFanHistory

1.3.6.1.4.1.33.16.8.1.1.17

INTEGER

read-only

The status history of the power supply's fan.

INT powerSupplyHardwareInhibitHistory

1.3.6.1.4.1.33.16.8.1.1.18

INTEGER

read-only

The status history of the power supply's hardware inhibit.

GAU powerSupplyPlus5Volts

1.3.6.1.4.1.33.16.8.1.1.19

Gauge

read-only

In hundredths, volts of +5 volt power currently provided by the power supply. A value of 0 indicates unknown.

GAU powerSupplyPlus12Volts

1.3.6.1.4.1.33.16.8.1.1.20

Gauge

read-only

In hundredths, volts of +12 volt power currently provided by the power supply. A value of 0 indicates unknown.

GAU powerSupplyMinus12Volts

1.3.6.1.4.1.33.16.8.1.1.21

Gauge

read-only

In hundredths, volts of -12 volt power currently provided by the power supply. A value of 0 indicates unknown.

GAU powerSupplyWatts

1.3.6.1.4.1.33.16.8.1.1.22

Gauge

read-only

Watts of power currently drawn from this power supply. A value of 0 indicates unknown.

GAU powerSupplyWattsMax

1.3.6.1.4.1.33.16.8.1.1.23

Gauge

read-only

Maximum watts of power available from this power supply. A value of 0 indicates unknown.

GAU powerSupplyChassisWatts

1.3.6.1.4.1.33.16.8.1.1.24

Gauge

read-only

Total watts of power currently drawn by the entire chassis. A value of 0 indicates unknown.

GAU powerSupplyChassisWattsMax

1.3.6.1.4.1.33.16.8.1.1.25

Gauge

read-only

Total maximum watts of power available from all the power supplies in the chassis. A value of 0 indicates unknown.

INT powerSupplyHardwareType

1.3.6.1.4.1.33.16.8.1.1.26

INTEGER

read-only

The type of power supply.

xFirmwareUpdate

1.3.6.1.4.1.33.16.9

firmwareUpdateTable

1.3.6.1.4.1.33.16.9.1

not-accessible

Table of descriptive and status information concerning the writing of firmware to a target I/O card.

firmwareUpdateEntry

1.3.6.1.4.1.33.16.9.1.1

not-accessible

An entry in the table concerning the writing of firmware to a target I/O card.

INT firmwareUpdateSlotIndex

1.3.6.1.4.1.33.16.9.1.1.1

INTEGER

read-only

This variable identifies the slot to which is to be the target of the firmware update.

STR firmwareUpdateDefaultFileName

1.3.6.1.4.1.33.16.9.1.1.2

DisplayString

read-only

This variable when read will obtain the default file name from the target.

STR firmwareUpdateFileName

1.3.6.1.4.1.33.16.9.1.1.3

DisplayString

read-write

This variable contains the name of the file to be read from the flash memory card and written to the target.

INT firmwareUpdateStatus

1.3.6.1.4.1.33.16.9.1.1.4

INTEGER

read-write

This variable is used to start the update process. The agent always 'ready' for this value. Setting this value to 'execute' causes the agent to write the file specified by firmwareUpdateFileName to be written to the taget. Setting this value to 'execute' when firmwareUpdateFileName has not been written or when firmwareUpdateState is 'writing' causes bad value to be returned.

INT firmwareUpdateState

1.3.6.1.4.1.33.16.9.1.1.5

INTEGER

read-only

This variable indicates the current state of firmware update, 'idle' indicates that firmware update may be initiated, and 'writing' indicates that an update is in process.

INT firmwareUpdateCompletionStatus

1.3.6.1.4.1.33.16.9.1.1.6

INTEGER

read-only

This variable indicates the completion status of the the last firmware update attempt. 'none' indicates that no firmware update has yet been attempted.

INT firmwareUpdateMethod

1.3.6.1.4.1.33.16.9.1.1.7

INTEGER

read-write

This variable indicates the method of update of the firmware update attempt.

xRepeater

1.3.6.1.4.1.33.17

NTF accessViolation

1.3.6.1.4.1.33.17.0.1

Access violation by connected system with Ethernet address not allowed by repeaterPortAccessTable and repeaterPortAccessAction.

NTF integrityLoss

1.3.6.1.4.1.33.17.0.2

This port has lost link integrity.

NTF redundancyPathChange

1.3.6.1.4.1.33.17.0.3

This trap issued to indicate that a redundancy group has experienced a path change. The offending group and the new path are included in the trap.

xRepeaterInfo

1.3.6.1.4.1.33.17.1

INT repeaterAccessViolation

1.3.6.1.4.1.33.17.1.1

INTEGER

read-write

Controls action to take when an access violation occurs.

INT repeaterMyGroup

1.3.6.1.4.1.33.17.1.2

INTEGER

read-only

The index value of the group that is directly associated with the agent. The snmp support for the group associated with the agent is a superset of the support for other groups.

CTR repeaterFifoOverflows

1.3.6.1.4.1.33.17.1.3

Counter

read-only

Deprecated, use repeaterRepeaterFifoOverflows in the repeaterRepeater group for the desired repeater.

INT repeaterLEDDisplay

1.3.6.1.4.1.33.17.1.4

INTEGER

read-write

Controls reason for flashing front panel LEDs.

INT repeaterReports

1.3.6.1.4.1.33.17.1.5

INTEGER

read-write

Deprecated, use repeaterRepeaterReports in the repeaterRepeater group for the desired repeater on which report generation is to be controlled.

INT repeaterHealthTrap

1.3.6.1.4.1.33.17.1.6

INTEGER

read-write

Controls the generation of the repeater health trap.

INT repeaterStatusChangeTrap

1.3.6.1.4.1.33.17.1.7

INTEGER

read-write

Controls the generation of the repeater status change trap.

INT repeaterAccessViolationTrap

1.3.6.1.4.1.33.17.1.8

INTEGER

read-write

Controls the generation of the repeater access violation trap.

INT repeaterIntegrityLossTrap

1.3.6.1.4.1.33.17.1.9

INTEGER

read-write

Controls the generation of the repeater integrity loss trap.

INT repeaterRedundancyPathChangeTrap

1.3.6.1.4.1.33.17.1.10

INTEGER

read-write

Controls the generation of the repeater redundancy path change trap.

xRepeaterGroupInfo

1.3.6.1.4.1.33.17.2

repeaterGroupTable

1.3.6.1.4.1.33.17.2.1

not-accessible

Table of descriptive and status information about the groups.

repeaterGroupEntry

1.3.6.1.4.1.33.17.2.1.1

not-accessible

An entry in the table, containing information about a group.

INT repeaterGroupIndex

1.3.6.1.4.1.33.17.2.1.1.1

INTEGER

read-only

This variable identifies the group within the repeater for which this entry contains information. This value is the same as rptrGroupIndex.

CTR repeaterGroupSQE

1.3.6.1.4.1.33.17.2.1.1.2

Counter

read-only

Deprecated, use repeaterRepeaterSQE in the repeaterRepeaterGroup for the SQE count on the desired repeater. This object will always return the count for repeater #1.

CTR repeaterGroupJabbers

1.3.6.1.4.1.33.17.2.1.1.3

Counter

read-only

Deprecated, use repeaterRepeaterJabbers in the repeaterRepeaterGroup for the Jabber count on the desired repeater. This object will always return the count for repeater #1.

SEG repeaterGroupSegment

1.3.6.1.4.1.33.17.2.1.1.4

Segment

read-write

Deprecated, use repeaterRepeaterSegment in the repeaterRepeaterGroup to control the segment mapping for the desired repeater. This object will always control the mapping for repeater #1.

INT repeaterGroupSecurityLock

1.3.6.1.4.1.33.17.2.1.1.5

INTEGER

read-write

This variable indicates the state of security lockdown on an unmanaged repeater. The only writable value is 'unlocked'.

INT repeaterGroupIOCardType

1.3.6.1.4.1.33.17.2.1.1.6

INTEGER

read-only

The hardware type of the I/O card, as defined in ITouch Assigned Numbers.

INT repeaterGroupIOCardFirmwareVersion

1.3.6.1.4.1.33.17.2.1.1.7

INTEGER

read-only

The firmware revision level of the I/O card ROM.

INT repeaterGroupIOCardOperStatus

1.3.6.1.4.1.33.17.2.1.1.8

INTEGER

read-only

Relative to the chassis, the current operating status of the I/O card.

INT repeaterGroupManagement

1.3.6.1.4.1.33.17.2.1.1.9

INTEGER

read-only

This variable indicates the level of management control and observation available.

INT repeaterGroupRepeaterNumber

1.3.6.1.4.1.33.17.2.1.1.10

INTEGER

read-only

The number of logical repeaters visible via this repeater.

INT repeaterGroupRepeaterHardwareVersion

1.3.6.1.4.1.33.17.2.1.1.11

INTEGER

read-only

The repeater chip set hardware revision level.

REP repeaterGroupManagerRepeater

1.3.6.1.4.1.33.17.2.1.1.12

Repeater

read-write

The logical repeater to which the manager card, if present, is attached.

CTR repeaterGroupFifoErrors

1.3.6.1.4.1.33.17.2.1.1.13

Counter

read-only

This variable will reflect the number of times that the report FIFO has gone out of synchronization.

INT repeaterGroupCpuUtilization

1.3.6.1.4.1.33.17.2.1.1.14

INTEGER

read-only

The average CPU utilization for the processor which maintains statistics and implements monitoring for the group, expressed as percentage times 100.

INT repeaterGroupMemoryUtilization

1.3.6.1.4.1.33.17.2.1.1.15

INTEGER

read-only

The current memory utilization for the processor which maintains statistics and implements monitoring for the group, expressed as percentage used times 100.

INT repeaterGroupAlarmCount

1.3.6.1.4.1.33.17.2.1.1.16

INTEGER

read-only

The number of alarms currently being monitored by the processor for comparison with RMON thresholds.

xRepeaterPortInfo

1.3.6.1.4.1.33.17.3

repeaterPortTable

1.3.6.1.4.1.33.17.3.1

not-accessible

Table of descriptive and status information about the ports.

repeaterPortEntry

1.3.6.1.4.1.33.17.3.1.1

not-accessible

An entry in the table, containing information about a port.

INT repeaterPortGroupIndex

1.3.6.1.4.1.33.17.3.1.1.1

INTEGER

read-only

This variable identifies the group containing the port for which this entry contains infromation.

INT repeaterPortIndex

1.3.6.1.4.1.33.17.3.1.1.2

INTEGER

read-only

This variable identifies the port within the group within the repeater for which this entry contains management information. This value can never be greater than rptrGroupPortCapacity for the associated group.

STR repeaterPortName

1.3.6.1.4.1.33.17.3.1.1.3

DisplayString

read-write

The port's display name.

INT repeaterPortAutoPolarity

1.3.6.1.4.1.33.17.3.1.1.4

INTEGER

read-write

Controls whether the port will automatically determine its polarity.

INT repeaterPortPolarityDirection

1.3.6.1.4.1.33.17.3.1.1.5

INTEGER

read-only

If repeaterPortAutoPolarity is enabled, this is the current polarity of the port.

INT repeaterPortPulse

1.3.6.1.4.1.33.17.3.1.1.6

INTEGER

read-write

Controls whether the port will periodically generate a test pulse to determine the status of the port.

INT repeaterPortPulseStatus

1.3.6.1.4.1.33.17.3.1.1.7

INTEGER

read-only

If repeaterPortPulse is enabled, this is indicates whether the test pulse response is being detected.

CTR repeaterPortPulseLosses

1.3.6.1.4.1.33.17.3.1.1.8

Counter

read-only

The number of times that a test pulse has been sent and a response was not received.

INT repeaterPortDistance

1.3.6.1.4.1.33.17.3.1.1.9

INTEGER

read-write

Controls whether the port will support extended distances on the port.

CTR repeaterPortSofMissing

1.3.6.1.4.1.33.17.3.1.1.10

Counter

read-only

The number of times that alternating zero/one bits were seen after an inter-packet gap and were not followed by two one bits.

CTR repeaterPortMCVs

1.3.6.1.4.1.33.17.3.1.1.11

Counter

read-only

The number of manchester violation errors detected on this port.

INT repeaterPortZero

1.3.6.1.4.1.33.17.3.1.1.12

INTEGER

read-write

Control to zero the hub port's counters. The agent always returns 'ready' for this value. Setting the value to 'ready' has no effect.

TIK repeaterPortSinceZero

1.3.6.1.4.1.33.17.3.1.1.13

TimeTicks

read-only

Number of time ticks since the port's counters were zeroed.

INT repeaterPortAccessAction

1.3.6.1.4.1.33.17.3.1.1.14

INTEGER

read-write

Control whether packets will be accepted or discarded if they are in the access list. The inverse action is applied to packets from all addresses not in the list.

INT repeaterPortAccessState

1.3.6.1.4.1.33.17.3.1.1.15

INTEGER

read-only

Indicates whether the port was disabled due to receiving a frame from an invalid source address.

INT repeaterPortAccessType

1.3.6.1.4.1.33.17.3.1.1.16

INTEGER

read-only

Indicates the type of the port.

INT repeaterPortAccessAllStatus

1.3.6.1.4.1.33.17.3.1.1.17

INTEGER

read-write

Setting this field to invalid will delete all access addresses associated with this port. Setting this field to valid has no effect.

MAC repeaterPortPortLastViolationAddress

1.3.6.1.4.1.33.17.3.1.1.18

MacAddress

read-only

Address that last caused an access violation.

CTR repeaterPortPortAddressViolations

1.3.6.1.4.1.33.17.3.1.1.19

Counter

read-only

Number of access violations.

SEG repeaterPortSegment

1.3.6.1.4.1.33.17.3.1.1.20

Segment

read-only

Returns the indirect mapping of the ethernet repeater to which this port is connected.

INT repeaterPortAccessLearn

1.3.6.1.4.1.33.17.3.1.1.21

INTEGER

read-write

Controls how the port will learn the source addresses that can come in on the port.

INT repeaterPortEthernetRepeater

1.3.6.1.4.1.33.17.3.1.1.22

INTEGER

read-write

For repeaters that implement non-proxy management of logical repeaters, this variable selects the logical Ethernet repeater to which the port is attached.

OCT repeaterPortRepeatersAllowed

1.3.6.1.4.1.33.17.3.1.1.23

OCTET STRING

read-only

The list of repeaters to which this port can be attached. The OCTET STRING contains a bitmap, with a bit for 'none' and one bit for each repeater, and enough octets for all the repeaters on the device. The high order bit of the first octet corresponds to 'none', the following bits correspond to the repeaters, in order, beginning with 1.

MAC repeaterPortGlobalSecurityAddress

1.3.6.1.4.1.33.17.3.1.1.24

MacAddress

read-only

This variable represents the global address which is currently applied to the port.

CTR repeaterPortGlobalAddressChanges

1.3.6.1.4.1.33.17.3.1.1.25

Counter

read-only

This variable represents the number of times since counters have been zeroed, that a global address change occured on the port.

GAU repeaterPortPercentUtilization

1.3.6.1.4.1.33.17.3.1.1.26

Gauge

read-only

This variable will reflect the percentage of a full ethernet load that this port has received since last zeroed. The value is calculated as '(8(bytesReceived + (20*framesReceived))) /107(time)'.

repeaterPortAccessTable

1.3.6.1.4.1.33.17.3.2

not-accessible

Table of access control for the ports.

repeaterPortAccessEntry

1.3.6.1.4.1.33.17.3.2.1

not-accessible

An entry in the table, containing access information about a port.

INT repeaterPortAccessGroupIndex

1.3.6.1.4.1.33.17.3.2.1.1

INTEGER

read-only

This variable identifies the group containing the access entry for which this entry contains information. The group ID may only be that of the target agent. Specifying a group ID of an agent in a different slot will result in `badValue` being returned.

INT repeaterPortAccessPortIndex

1.3.6.1.4.1.33.17.3.2.1.2

INTEGER

read-only

This variable identifies the port containing the access entry for which this entry contains information.

MAC repeaterPortAccessAddress

1.3.6.1.4.1.33.17.3.2.1.3

MacAddress

read-only

This value will be compared to the source address of all packets received on the port in applying the access action

INT repeaterPortAccessStatus

1.3.6.1.4.1.33.17.3.2.1.4

INTEGER

read-write

The status of the entry. Set to 'invalid' to remove the rule.

INT repeaterPortAccessGroupIndexShadow

1.3.6.1.4.1.33.17.3.3

INTEGER

read-write

This variable identifies the group which contains a port to which an access address is to be assigned. The group ID may only be that of the target agent. Specifying a group ID of an agent in a different slot will result in `badValue` being returned.

INT repeaterPortAccessPortIndexShadow

1.3.6.1.4.1.33.17.3.4

INTEGER

read-write

This variable identifies the port of a group to which an access address is to be assigned.

MAC repeaterPortAccessAddressShadow

1.3.6.1.4.1.33.17.3.5

MacAddress

read-write

This value contains the ethernet address which is to be added to the access address table for the port specified by repeaterPortAccessGroupIndexShadow and repeaterPortAccessPortIndexShadow.

INT repeaterPortAccessStatusShadow

1.3.6.1.4.1.33.17.3.6

INTEGER

read-write

When read, this variable will always return 'ready'. When this variable is set to 'execute' the address specified by repeaterPortAccessAddressShadow will be added to the access address table for the port specified by repeaterPortAccessGroupIndexShadow and repeaterPortAccessPortIndexShadow. If any of the above variables are zero when this object is set to 'execute', 'bad value' will be returned.

repeaterPort2Table

1.3.6.1.4.1.33.17.3.7

not-accessible

Table of more descriptive and status information about the ports.

repeaterPort2Entry

1.3.6.1.4.1.33.17.3.7.1

not-accessible

An entry in the table, containing information about a port. Index is identical to repeaterPortTable.

CTR repeaterPort2RmonOctets

1.3.6.1.4.1.33.17.3.7.1.1

Counter

read-only

The total number of octets of data (including those in bad packets) received on the port (excluding framing bits but including FCS octets).

CTR repeaterPort2RmonPkts

1.3.6.1.4.1.33.17.3.7.1.2

Counter

read-only

The total number of packets (including error packets) received on the port.

CTR repeaterPort2RmonBroadcastPkts

1.3.6.1.4.1.33.17.3.7.1.3

Counter

read-only

The total number of good packets received on the port that were directed to the broadcast address.

CTR repeaterPort2RmonMulticastPkts

1.3.6.1.4.1.33.17.3.7.1.4

Counter

read-only

The total number of good packets received on the port that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address.

CTR repeaterPort2RmonCRCAlignErrors

1.3.6.1.4.1.33.17.3.7.1.5

Counter

read-only

The total number of packets received on the port that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but were not an integral number of octets in length or had a bad Frame Check Sequence (FCS).

CTR repeaterPort2RmonPkts64Octets

1.3.6.1.4.1.33.17.3.7.1.6

Counter

read-only

The total number of packets (including error packets) received on the port that were 64 octets in length (excluding framing bits but including FCS octets).

CTR repeaterPort2RmonPkts65to127Octets

1.3.6.1.4.1.33.17.3.7.1.7

Counter

read-only

The total number of packets (including error packets) received on the port that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).

CTR repeaterPort2RmonPkts128to255Octets

1.3.6.1.4.1.33.17.3.7.1.8

Counter

read-only

The total number of packets (including error packets) received on the port that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).

CTR repeaterPort2RmonPkts256to511Octets

1.3.6.1.4.1.33.17.3.7.1.9

Counter

read-only

The total number of packets (including error packets) received on the port that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).

CTR repeaterPort2RmonPkts512to1023Octets

1.3.6.1.4.1.33.17.3.7.1.10

Counter

read-only

The total number of packets (including error packets) received on the port that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).

CTR repeaterPort2RmonPkts1024to1518Octets

1.3.6.1.4.1.33.17.3.7.1.11

Counter

read-only

The total number of packets (including error packets) received on the port that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).

INT repeaterPort2TrafficRatio

1.3.6.1.4.1.33.17.3.7.1.12

INTEGER

read-only

The portion of segment bandwidth used by the port over a 5 second interval, expressed as percentage times 100.

INT repeaterPort2CollisionRatio

1.3.6.1.4.1.33.17.3.7.1.13

INTEGER

read-only

The ratio of collisions the port participated in to total packets over a 5 second interval, expressed as percentage times 100.

INT repeaterPort2ErrorRatio

1.3.6.1.4.1.33.17.3.7.1.14

INTEGER

read-only

The ratio of total number of error frames on the port to total packets over a 5 second interval, expressed as percentage times 100.

INT repeaterPort2BroadcastRatio

1.3.6.1.4.1.33.17.3.7.1.15

INTEGER

read-only

The ratio of good packets directed by the port to the broadcast address to total packets over a 5 second interval, expressed as percentage times 100.

INT repeaterPort2MulticastRatio

1.3.6.1.4.1.33.17.3.7.1.16

INTEGER

read-only

The ratio of good packets directed by the port to any multicast address (but not the broadcast address) to total packets over a 5 second interval, expressed as percentage times 100.

INT repeaterPort2UnicastRatio

1.3.6.1.4.1.33.17.3.7.1.17

INTEGER

read-only

The ratio of good packets directed by the port to any address other than a multicast or broadcast address to total packets over a 5 second interval, expressed as percentage times 100.

xRepeaterSlotInfo

1.3.6.1.4.1.33.17.4

repeaterSlotSegmentTable

1.3.6.1.4.1.33.17.4.1

not-accessible

Deprecated, no replacement.

repeaterSlotSegmentEntry

1.3.6.1.4.1.33.17.4.1.1

not-accessible

Deprecated, no replacement.

INT repeaterSlotIndex

1.3.6.1.4.1.33.17.4.1.1.1

INTEGER

read-only

Deprecated, no replacement.

SEG repeaterSlotSegment

1.3.6.1.4.1.33.17.4.1.1.2

Segment

read-only

Deprecated, no replacement.

INT repeaterSlotSegmentStatus

1.3.6.1.4.1.33.17.4.1.1.3

INTEGER

read-write

Deprecated, no replacement.

xRepeaterSecurity

1.3.6.1.4.1.33.17.5

INT repeaterSecurityState

1.3.6.1.4.1.33.17.5.1

INTEGER

read-write

Controls whether security operation will be applied to all ports on the repeater. If security is not supported by the device, 'badValue' will be returned if the variable is set to 'enabled'.

repeaterSecurityPortTable

1.3.6.1.4.1.33.17.5.2

not-accessible

Table of descriptive and status information about the ports.

repeaterSecurityPortEntry

1.3.6.1.4.1.33.17.5.2.1

not-accessible

An entry in the table, containing information about a port.

INT repeaterSecurityPortUnicast

1.3.6.1.4.1.33.17.5.2.1.1

INTEGER

read-write

The action to take when the destination address is unicast and does not have an entry in repeaterSecurityTable. If repeaterPortGroupIndex is equal to the group number of the agent, this object is read-write, otherwise it is read-only.

INT repeaterSecurityPortMulticast

1.3.6.1.4.1.33.17.5.2.1.2

INTEGER

read-write

The action to take when the destination address is multicast and does not have an entry in repeaterSecurityTable. If repeaterPortGroupIndex is equal to the group number of the agent, this object is read-write, otherwise it is read-only

INT repeaterSecurityPortAllStatus

1.3.6.1.4.1.33.17.5.2.1.3

INTEGER

read-write

Setting this field to invalid will delete all security addresses associated with this port. Setting this field to valid has no effect. If repeaterPortGroupIndex is equal to the group number of the agent, this object is read-write, otherwise it is read-only

INT repeaterSecurityPortSecurityLearn

1.3.6.1.4.1.33.17.5.2.1.4

INTEGER

read-write

Controls how the port will learn the destination addresses that can be sent to the port. If repeaterPortGroupIndex is equal to the group number of the agent, this object is read-write, otherwise it is read-only

repeaterSecurityTable

1.3.6.1.4.1.33.17.5.3

not-accessible

Table of security control for the ports.

repeaterSecurityEntry

1.3.6.1.4.1.33.17.5.3.1

not-accessible

An entry in the table, containing security information about a port.

INT repeaterSecurityGroupIndex

1.3.6.1.4.1.33.17.5.3.1.1

INTEGER

read-only

This variable identifies the group containing the security entry for which this entry contains information. The group ID may only be that of the target agent. Specifying a group ID of an agent in a different slot will result in `badValue` being returned.

INT repeaterSecurityPortIndex

1.3.6.1.4.1.33.17.5.3.1.2

INTEGER

read-only

This variable identifies the port containing the security entry for which this entry contains infromation.

MAC repeaterSecurityAddress

1.3.6.1.4.1.33.17.5.3.1.3

MacAddress

read-only

This value will be compared to the destination address of all packets received on the port in applying the security action.

INT repeaterSecurityStatus

1.3.6.1.4.1.33.17.5.3.1.4

INTEGER

read-write

The status of the entry. Set to 'invalid' to remove the rule.

INT repeaterSecurityAction

1.3.6.1.4.1.33.17.5.3.1.5

INTEGER

read-write

The action to take when the destination address matches.

INT repeaterSecurityGroupIndexShadow

1.3.6.1.4.1.33.17.5.4

INTEGER

read-write

This variable identifies the group containing a port to which a security address is to be assigned. The group ID may only be that of the target agent. Specifying a group ID of an agent in a different slot will result in `badValue` being returned.

INT repeaterSecurityPortIndexShadow

1.3.6.1.4.1.33.17.5.5

INTEGER

read-write

This variable identifies the port of a group to which a security address is to be assigned.

MAC repeaterSecurityAddressShadow

1.3.6.1.4.1.33.17.5.6

MacAddress

read-write

This value contains the ethernet address which is to be added to the security address table for the port specified by repeaterSecurityGroupIndexShadow and repeaterSecurityPortIndexShadow.

INT repeaterSecurityStatusShadow

1.3.6.1.4.1.33.17.5.7

INTEGER

read-write

When read, this variable will always return 'ready'. When this variable is set to 'execute' the address specified by repeaterSecurityAddressShadow will be added to the security address table for the port specified by repeaterSecurityGroupIndexShadow and repeaterSecurityPortIndexShadow. If any of the above variables are zero when this object is set to 'execute', 'bad value' will be returned.

repeaterSecurityGlobalAddressTable

1.3.6.1.4.1.33.17.5.8

not-accessible

Table of ethernet addresses which are applied globally (intra Network 9000 chassis) to ports.

repeaterSecurityGlobalAddressEntry

1.3.6.1.4.1.33.17.5.8.1

not-accessible

An entry in the table containing information about a specific address.

MAC repeaterSecurityGlobalAddress

1.3.6.1.4.1.33.17.5.8.1.1

MacAddress

read-only

This variable identifies the address.

INT repeaterSecurityGlobalAddressStatus

1.3.6.1.4.1.33.17.5.8.1.2

INTEGER

read-write

This variable represents the status of the entry. Setting this object (or any other writable object) to 'valid' will cause the row in the table to be created. Setting this object to 'invalid' will cause the row to be removed.

INT repeaterSecurityGlobalAddressAction

1.3.6.1.4.1.33.17.5.8.1.3

INTEGER

read-write

This variable determines the action which is applied to the packet in the event of an address match. The packet is either passed untouched when set to 'pass', or it is forced to an alternating pattern of ones and zeros if set to 'jam'.

INT repeaterSecurityGlobalDBID

1.3.6.1.4.1.33.17.5.9

INTEGER

read-only

This variable contains the current version number of the global security database.

INT repeaterSecurityGlobalSecurityAdminState

1.3.6.1.4.1.33.17.5.10

INTEGER

read-write

This variable controls whether global security is enabled or disabled. Global security will not function unless repeaterSecurityState and this variable are both set to `enabled`.

INT repeaterSecurityGlobalSecurityOperState

1.3.6.1.4.1.33.17.5.11

INTEGER

read-only

This variable indicates the operational state of global security. If repeaterSecurityState is set to 'enabled' this variable will reflect the value of repeaterSecurityGlobalSecurityAdminState. if repeaterSecurityState is set to 'disabled', this variable will return 'securityDisabled'.

xRepeaterRepeater

1.3.6.1.4.1.33.17.6

repeaterRepeaterTable

1.3.6.1.4.1.33.17.6.1

not-accessible

For repeaters that implement non-proxy management of logical repeaters, a table of descriptive and status information about a logical Ethernet repeater.

repeaterRepeaterEntry

1.3.6.1.4.1.33.17.6.1.1

not-accessible

An entry for a logical Ethernet repeater.

INT repeaterRepeaterGroupIndex

1.3.6.1.4.1.33.17.6.1.1.1

INTEGER

read-only

The slot of the chassis.

INT repeaterRepeaterIndex

1.3.6.1.4.1.33.17.6.1.1.2

INTEGER

read-only

The logical Ethernet repeater within the group.

SEG repeaterRepeaterSegment

1.3.6.1.4.1.33.17.6.1.1.3

Segment

read-write

The Network 9000 Ethernet network segment to which the logical repeater is attached.

INT repeaterRepeaterReports

1.3.6.1.4.1.33.17.6.1.1.4

INTEGER

read-write

Control for whether statistical reports will be collected for this logical repeater.

CTR repeaterRepeaterCollisions

1.3.6.1.4.1.33.17.6.1.1.5

Counter

read-only

The number of packet collisions detected on the Ethernet network segment to which this logical repeater is attached.

CTR repeaterRepeaterJabbers

1.3.6.1.4.1.33.17.6.1.1.6

Counter

read-only

The number of Jabber events detected for this logical repeater.

CTR repeaterRepeaterSQE

1.3.6.1.4.1.33.17.6.1.1.7

Counter

read-only

The number of SQE failure events detected for this logical repeater.

CTR repeaterRepeaterFifoOverflows

1.3.6.1.4.1.33.17.6.1.1.8

Counter

read-only

The number of times the report FIFO was full when this logical repeater attemped to write a packet report.

INT repeaterRepeaterZero

1.3.6.1.4.1.33.17.6.1.1.9

INTEGER

read-write

Control for zeroing the logical repeater's counters. The agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting the value to 'execute' will zero the counters for the logical repeater.

TIK repeaterRepeaterSinceZero

1.3.6.1.4.1.33.17.6.1.1.10

TimeTicks

read-only

The number of hundredths of a second since the counters for this logical repeater were last zeroed. This variable is set to zero when repeaterRepeaterZero is written with the value 'execute'.

OCT repeaterRepeaterSegmentsAllowed

1.3.6.1.4.1.33.17.6.1.1.11

OCTET STRING

read-only

The list of segments to which this repeater can be attached. The OCTET STRING contains a bitmap, with a bit for 'none' and one bit for each segment, and enough octets for all the Ethernet segments in the chassis. The high order bit of the first octet corresponds to 'none', the following bits correspond to the segments, in order, beginning with A.

CTR repeaterRepeaterTotalOctets

1.3.6.1.4.1.33.17.6.1.1.12

Counter

read-only

This variable will reflect the total number of bytes that the repeater both received from and sent to the segment. Bytes in both good and error frames are counted.

CTR repeaterRepeaterTotalFrames

1.3.6.1.4.1.33.17.6.1.1.13

Counter

read-only

This variable will reflect the total number of frames that the repeater both received from and sent to the segment. Both good and error frames are counted.

GAU repeaterRepeaterPercentUtilization

1.3.6.1.4.1.33.17.6.1.1.14

Gauge

read-only

This variable will reflect the percentage of a full ethernet load that this repeater has handled since last zeroed. The value is calculated as `(8(totalBytes + (20*totalFrames)))/10 7(time)`.

xRepeaterRedundancy

1.3.6.1.4.1.33.17.7

INT repeaterRedundancyState

1.3.6.1.4.1.33.17.7.1

INTEGER

read-write

This variable controls whether hub redundancy is enabled

repeaterRedundancyGroupTable

1.3.6.1.4.1.33.17.7.2

not-accessible

Table of descriptive and status information concerning hub redundancy groups.

repeaterRedundancyGroupEntry

1.3.6.1.4.1.33.17.7.2.1

not-accessible

An entry in the table containing information about a specific hub redundancy group.

INT repeaterRedundancyGroupGroupIndex

1.3.6.1.4.1.33.17.7.2.1.1

INTEGER

read-only

This variable identifies the group.

INT repeaterRedundancyGroupStatus

1.3.6.1.4.1.33.17.7.2.1.2

INTEGER

read-write

This variable represents the status of the entry. Setting this object (or any other writable object) to 'valid' will cause the row in the table to be created. Setting this object to 'invalid' will cause the row to be removed. If a row is removed from the group table, all related rows in the path table and address table are also removed.

STR repeaterRedundancyGroupName

1.3.6.1.4.1.33.17.7.2.1.3

DisplayString

read-write

This variable represents the definable name of the group. Prior to being set, this object will return the default name 'Groupn' where n is the value of repeaterRedundancyGroupIndex. Setting this object to a zero length string will cause the default name to be assumed.

INT repeaterRedundancyGroupAdminState

1.3.6.1.4.1.33.17.7.2.1.4

INTEGER

read-write

This variable represents the desired state of the group. When this variable is set to 'enabled', the group will be activly monitored for integrity, and back- up paths will be brought up as higher priority paths disappear. When set to 'disabled', the path will not be tested for integrity.

INT repeaterRedundancyGroupTestInterval

1.3.6.1.4.1.33.17.7.2.1.5

INTEGER

read-write

This variable determines the rate at which testing is performed on the path which is currently active (repeaterRedundancyGroupOperPath) in order to determine integrity. The value is in milliseconds.

INT repeaterRedundancyGroupRollbackAdminState

1.3.6.1.4.1.33.17.7.2.1.6

INTEGER

read-write

This variable represents the desired state of path rollback. Path rollback is defined as the automatic testing and reactivation of higher priority paths. It should be noted that in order to test higher priority paths, the currently enabled path will be interrupted. Setting this variable to 'enabled' will cause rollback testing to occur every repeaterRedundancyGroupRollbackInterval number of milliseconds. Setting this variable to 'disabled' will force the group to remain on lower priority paths, until they themselves fail.

INT repeaterRedundancyGroupRollbackInterval

1.3.6.1.4.1.33.17.7.2.1.7

INTEGER

read-write

This variable determines the rate at which rollback testing is performed. The value is in milliseconds.

INT repeaterRedundancyGroupOperPath

1.3.6.1.4.1.33.17.7.2.1.8

INTEGER

read-only

This variable represents the index of the path which is currently being used as the active path. This value may be used as the value for repeaterRedundancyPathIndex to index the path table.

CTR repeaterRedundancyGroupPathChanges

1.3.6.1.4.1.33.17.7.2.1.9

Counter

read-only

The value of this variable represents the number of times that this group has changed paths.

CTR repeaterRedundancyGroupRollbackAttempts

1.3.6.1.4.1.33.17.7.2.1.10

Counter

read-only

The value of this variable represents the number of times that the current path has been interrupted in interest of testing a higher priority path.

INT repeaterRedundancyGroupZero

1.3.6.1.4.1.33.17.7.2.1.11

INTEGER

read-write

This variable is used to zero all counters associated with a group. This variable when read will always read 'ready'. When set to 'execute', all counters associated with the group (group counters and path counters) will be set to zero.

TIK repeaterRedundancyGroupSinceZero

1.3.6.1.4.1.33.17.7.2.1.12

TimeTicks

read-only

The value of this variable represents the number of seconds which have elapsed since the counters associated with the group have been zeroed.

INT repeaterRedundancyGroupConfigStatus

1.3.6.1.4.1.33.17.7.2.1.13

INTEGER

read-only

In order for a particular redundancy group to be used by the system, it must have at least one redundancy path defined. This variable indicates whether a redundancy group has been completely configured, and can therefore become active.

repeaterRedundancyPathTable

1.3.6.1.4.1.33.17.7.3

not-accessible

Table of descriptive and status information concerning hub redundancy paths.

repeaterRedundancyPathEntry

1.3.6.1.4.1.33.17.7.3.1

not-accessible

An entry in the table containing information about a specific hub redundancy path.

INT repeaterRedundancyPathGroupIndex

1.3.6.1.4.1.33.17.7.3.1.1

INTEGER

read-only

This variable identifies the group.

INT repeaterRedundancyPathPathIndex

1.3.6.1.4.1.33.17.7.3.1.2

INTEGER

read-only

This variable identifies the path of the group.

INT repeaterRedundancyPathStatus

1.3.6.1.4.1.33.17.7.3.1.3

INTEGER

read-write

This variable represents the status of the entry. Setting this object (or any other writable object) to 'valid' will cause the row in the table to be created. Setting this object to 'invalid' will cause the row to be removed. If a row is removed from the path table, all related rows in the address table are also removed.

INT repeaterRedundancyPathSlot

1.3.6.1.4.1.33.17.7.3.1.4

INTEGER

read-write

This variable represents the slot of the Network 9000 chassis which contains the repeater on which the path interface resides.

INT repeaterRedundancyPathPort

1.3.6.1.4.1.33.17.7.3.1.5

INTEGER

read-write

This variable represents the port of the repeater to which the path is connected.

INT repeaterRedundancyPathPriority

1.3.6.1.4.1.33.17.7.3.1.6

INTEGER

read-write

This variable represents the order of preferred priority for the path. Lower numbed paths are preferred over higher numbered paths.

INT repeaterRedundancyPathActivate

1.3.6.1.4.1.33.17.7.3.1.7

INTEGER

read-write

This variable is used to immediately make a specific path active. This variable when read will always read 'ready'. When set to 'execute', the selected path will become the active path for the group. Note that if rollback is enabled and this path is lower in priority, the system will attempt to restore the higher priority path.

INT repeaterRedundancyPathTimeout

1.3.6.1.4.1.33.17.7.3.1.8

INTEGER

read-write

This variable represents the amount of time in milliseconds that the syatem will wait for test responses from targets on the path.

INT repeaterRedundancyPathRetryCount

1.3.6.1.4.1.33.17.7.3.1.9

INTEGER

read-write

This variable represents the number of times a test is retried on the path in the event of a timeout before the path is considered useless.

CTR repeaterRedundancyPathTestAttempts

1.3.6.1.4.1.33.17.7.3.1.10

Counter

read-only

The value of this variable represents the number of times that an integrity test was performed on the path.

INT repeaterRedundancyPathLastTestStatus

1.3.6.1.4.1.33.17.7.3.1.11

INTEGER

read-only

This variable indicates the result of the last test of the path. 'notTested' indicates that the path has yet to be tested. 'responded' indicates that a target on the path path has responded to the last test, 'timeout' indicates that no target on the path responded to the last test. 'integrity' indicates that a test was not performed on the path due to an abscense of port integrity.

INT repeaterRedundancyPathDisposition

1.3.6.1.4.1.33.17.7.3.1.12

INTEGER

read-write

This variable controls the action that will be taken when a path is considered bad. 'disable' indicates that the path is to be disabled prior to switching to an alternate path. 'null' indicates that the failed path is to be left in its current state prior to switching to an alternate path.

INT repeaterRedundancyPathConfigStatus

1.3.6.1.4.1.33.17.7.3.1.13

INTEGER

read-only

In order for a particular redundancy path to be used by the system, it must have at least one target address and the slot and the port on which it originates defined. This variable indicates whether a redundancy path has been completely configured, and can therefore become active.

INT repeaterRedundancyPathAdminState

1.3.6.1.4.1.33.17.7.3.1.14

INTEGER

read-write

This variable represents the desired state of the path. When this variable is set to 'disabled' the path will not be used by the group. When set to 'enabled', the path is available as an alternate or primary path.

repeaterRedundancyAddressTable

1.3.6.1.4.1.33.17.7.4

not-accessible

Table of descriptive and status information concerning hub redundancy target addresses.

repeaterRedundancyAddressEntry

1.3.6.1.4.1.33.17.7.4.1

not-accessible

An entry in the table containing information about a specific target address associated with a hub redundancy path.

INT repeaterRedundancyAddressGroupIndex

1.3.6.1.4.1.33.17.7.4.1.1

INTEGER

read-only

This variable identifies the group.

INT repeaterRedundancyAddressPathIndex

1.3.6.1.4.1.33.17.7.4.1.2

INTEGER

read-only

This variable identifies the path of the group.

ADR repeaterRedundancyAddressAddress

1.3.6.1.4.1.33.17.7.4.1.3

TypedAddress

read-only

This variable identifies the specific target address.

INT repeaterRedundancyAddressStatus

1.3.6.1.4.1.33.17.7.4.1.4

INTEGER

read-write

This variable represents the status of the entry. Setting this object (or any other writable object) to 'valid' will cause the row in the table to be created. Setting this object to 'invalid' will cause the row to be removed.

CTR repeaterRedundancyAddressResponses

1.3.6.1.4.1.33.17.7.4.1.5

Counter

read-only

This value of this variable represents the number of times this specific address has responded to a test attempt.

INT repeaterRedundancyAddressLastTestStatus

1.3.6.1.4.1.33.17.7.4.1.6

INTEGER

read-only

This variable indicates whether this particular address responded to the last test of the path. 'notTested' indicates that the path has yet to be tested. 'responded' indicates that the target responded to the last test, 'timeout' indicates that the target responded to the last test.

xBridge

1.3.6.1.4.1.33.19

xBridgeSystem

1.3.6.1.4.1.33.19.1

INT bridgeState

1.3.6.1.4.1.33.19.1.1

INTEGER

read-write

Controls whether the bridge will perform bridging.

INT bridgeEarlyLoopState

1.3.6.1.4.1.33.19.1.2

INTEGER

read-write

Controls whether the bridge will implement the early loop detection algorithm of restarting the Spanning Tree Protocol when a packet is received from a source on one interface when the source was learned on a different interface.

CTR bridgeEarlyLoopCount

1.3.6.1.4.1.33.19.1.3

Counter

read-only

The number of times that an early loop was detected while the early loop state was enabled.

MAC bridgeEarlyLoopAddress

1.3.6.1.4.1.33.19.1.4

MacAddress

read-only

The last address to cause an early loop to be detected while the early loop state was enabled.

INT bridgeSpanningTreeState

1.3.6.1.4.1.33.19.1.5

INTEGER

read-write

Controls whether the bridge will run the Spanning Tree Protocol.

INT bridgeFilterDiscardTimeout

1.3.6.1.4.1.33.19.1.6

INTEGER

read-write

The number of seconds before an inactive filter is deleted. Learned filters become inactive when the use timeout (dot1dTpAgingTime) has been exceeded.

INT bridgeTopologyState

1.3.6.1.4.1.33.19.1.7

INTEGER

read-only

Indicates whether the Spanning Tree Protocol's topology is stable or changing.

MAC bridgeTopologyChangeAddr

1.3.6.1.4.1.33.19.1.8

MacAddress

read-only

The ethernet address of the last bridge from which a Topology Change Notification packet was received.

xBridgeProtocol

1.3.6.1.4.1.33.19.3

INT bridgeProtocolFilterState

1.3.6.1.4.1.33.19.3.1

INTEGER

read-write

Controls whether protocol filtering is active.

INT bridgeProtocolDefaultPriority

1.3.6.1.4.1.33.19.3.2

INTEGER

read-write

Controls the default priority if no entry exists for the protocol.

bridgeProtocolTable

1.3.6.1.4.1.33.19.3.3

not-accessible

A list of bridge protocol filters.

bridgeProtocolEntry

1.3.6.1.4.1.33.19.3.3.1

not-accessible

Bridge protocol filter entry.

OCT bridgeProtocolProtocol

1.3.6.1.4.1.33.19.3.3.1.1

OCTET STRING

read-only

The protocol type associated with the entry. The value 65536 is for all 802.3 MAC frames.

STR bridgeProtocolName

1.3.6.1.4.1.33.19.3.3.1.2

DisplayString

read-write

The name associated with the protocol.

INT bridgeProtocolPriority

1.3.6.1.4.1.33.19.3.3.1.3

INTEGER

read-write

The priority or action to take with the protocol.

CTR bridgeProtocolUses

1.3.6.1.4.1.33.19.3.3.1.4

Counter

read-only

The number of times the filter has been used.

INT bridgeProtocolStatus

1.3.6.1.4.1.33.19.3.3.1.5

INTEGER

read-write

The status of the protocol entry. Set to 'invalid' to remove the entry.

xBridgeFilter

1.3.6.1.4.1.33.19.4

bridgeFilterTable

1.3.6.1.4.1.33.19.4.1

not-accessible

A list of bridge filters.

bridgeFilterEntry

1.3.6.1.4.1.33.19.4.1.1

not-accessible

Bridge filter entry.

INT bridgeFilterForwardSubPort

1.3.6.1.4.1.33.19.4.1.1.1

INTEGER

read-write

The unique identifier from which the address has been seen within the port. It is the DLCI for frame relay or VC for X25.

CTR bridgeFilterUses

1.3.6.1.4.1.33.19.4.1.1.2

Counter

read-only

The number of times the filter has been used for forwarding packets.

INT bridgeFilterAge

1.3.6.1.4.1.33.19.4.1.1.3

INTEGER

read-only

The number of seconds that a learned filter has been active or inactive. This value has no meaning for non-learned filters.

bridgeFilterLinkTable

1.3.6.1.4.1.33.19.4.2

not-accessible

Bridge filtering characteristics of all links.

bridgeFilterLinkEntry

1.3.6.1.4.1.33.19.4.2.1

not-accessible

Bridge filtering characteristics of a specific link.

INT bridgeFilterLinkOverflowCam

1.3.6.1.4.1.33.19.4.2.1.1

INTEGER

read-write

Identifies the number of extra entries in a hardware assist filter CAM that the user wants to have available to cover CAM entry overflow conditions. If filtering hardware is present, this field defaults to 400. Otherwise, it is zero.

xX25

1.3.6.1.4.1.33.20

xX25ChannelTable

1.3.6.1.4.1.33.20.4

not-accessible

Entries of xX25Channel Table.

xX25ChannelEntry

1.3.6.1.4.1.33.20.4.1

not-accessible

Entries of xX25ChannelTable.

INT xX25ChannelIndex

1.3.6.1.4.1.33.20.4.1.1

INTEGER

read-only

The ifIndex value for the X.25 physical link.

INT xX25ChannelLowPVC

1.3.6.1.4.1.33.20.4.1.2

INTEGER

read-write

Lowest PVC channel. Setting it to zero indicates 'none', and will also set the xX25ChannelHighPVC to zero. If set to a non-zero value and xX25ChannelHighPVC is zero, xX25ChannelHighPVC will be set to the same value. Otherwise, xX25ChannelLowPVC must be less than or equal to xX25ChannelHighPVC.

INT xX25ChannelHighPVC

1.3.6.1.4.1.33.20.4.1.3

INTEGER

read-write

Highest PVC channel. Setting it to 0 indicates none, and will also set the xX25ChannelLowPVC to 0. If set to a non-zero value and xX25ChannelLowPVC is zero, xX25ChannelLowPVC will be set to the same value. Otherwise, xX25ChannelHighPVC must be less than or equal to xX25ChannelLowPVC.

INT xX25ChannelNetwork

1.3.6.1.4.1.33.20.4.1.4

INTEGER

read-write

The type of network being run.

INT xX25ChannelMaxPrecedence

1.3.6.1.4.1.33.20.4.1.5

INTEGER

read-write

The maximum level of IP precedence supported.

INT xX25ChannelStdVersion

1.3.6.1.4.1.33.20.4.1.6

INTEGER

read-write

The standard year supported by x25. Values are usually 1980 or 1984 (the default).

xX25VcCfgTable

1.3.6.1.4.1.33.20.6

not-accessible

These objects contain information about the virtual circuit configuration in an X.25 PLE. These values are the configured values for circuits that may or may not be connected. Unconfigured calls may be added to this table as calls are accepted.

xX25VcCfgEntry

1.3.6.1.4.1.33.20.6.1

not-accessible

Entries of the xX25VcCfgTable.

INT xX25VcCfgIndex

1.3.6.1.4.1.33.20.6.1.1

INTEGER

read-only

An arbitrary index value for the virtual circuit.

ADR xX25VcCfgPartnerAddr

1.3.6.1.4.1.33.20.6.1.2

X121Address

read-write

Partner's X.121 Address.

INT xX25VcCfgInterfaceIndex

1.3.6.1.4.1.33.20.6.1.3

INTEGER

read-write

ifIndex of ITouch logical interface associated with this VC.

INT xX25VcCfgLinkIndex

1.3.6.1.4.1.33.20.6.1.4

INTEGER

read-write

ifIndex of physical link on which this VC resides.

INT xX25VcCfgProtocol

1.3.6.1.4.1.33.20.6.1.5

INTEGER

read-write

Protocol which is being encapsulated by this VC.

INT xX25VcCfgEncapsulation

1.3.6.1.4.1.33.20.6.1.6

INTEGER

read-write

Encapsulation method used by this VC.

INT xX25VcCfgPvc

1.3.6.1.4.1.33.20.6.1.7

INTEGER

read-write

Channel number if VC is a PVC, else 0. The value must be in the range of xX25ChannelLowPVC to xX25ChannelHighPVC

IP xX25VcCfgPartnerIpAddress

1.3.6.1.4.1.33.20.6.1.8

IpAddress

read-write

IP address of the partner over this VC. This must be configured if IP packets will not be MAC-encapsulated.

INT xX25VcCfgClearFacilities

1.3.6.1.4.1.33.20.6.1.9

INTEGER

read-write

Control to clear the VC call facilities string. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting it to 'execute' causes the string to be cleared.

INT xX25VcCfgStatus

1.3.6.1.4.1.33.20.6.1.10

INTEGER

read-write

Setting to 'invalid' removes this VC from the table. If 'valid', setting to 'valid' has no effect, otherwise it creates an entry.

xX25LinkTable

1.3.6.1.4.1.33.20.7

not-accessible

These objects contain information about the configuration of the X.25 physical links necessary for the ITouch Bridge/Router. Unless otherwise noted, changes to these objects require that the X.25 physical link be restarted in order for the changes to take effect.

xX25LinkEntry

1.3.6.1.4.1.33.20.7.1

not-accessible

Entries of the xX25LinkTable.

INT xX25LinkIndex

1.3.6.1.4.1.33.20.7.1.1

INTEGER

read-only

The ifIndex value for a ITouch physical link.

INT xX25LinkRRDelay

1.3.6.1.4.1.33.20.7.1.2

INTEGER

read-write

Number of packets received before an RR will be sent. The value must be less than the xX25CallParmInWindowSize. Modifying this object does not require the X.25 physical link to be restarted. 0 indicates that RR will not be sent.

INT xX25LinkIdleTimeout

1.3.6.1.4.1.33.20.7.1.3

INTEGER

read-write

Length of time in minutes that a virtual circuit may be idle before the circuit will be cleared. Modifying this object does not require the X.25 physical link to be restarted.

INT xX25LinkHoldDownTimer

1.3.6.1.4.1.33.20.7.1.4

INTEGER

read-write

Length of time in minutes after a virtual circuit has been cleared before it may make a call again. Modifying this object does not require the X.25 physical link to be restarted.

INT xX25LinkAccUncfgCalls

1.3.6.1.4.1.33.20.7.1.5

INTEGER

read-write

Indicates whether unconfigured, non-reverse charged calls will be accepted. Modifying this object does not require the X.25 physical link to be restarted.

INT xX25LinkDefWindSize

1.3.6.1.4.1.33.20.7.1.6

INTEGER

read-write

Default packet level window size for this link.

INT xX25LinkMaxWindSize

1.3.6.1.4.1.33.20.7.1.7

INTEGER

read-write

Maximum packet level window size for this link.

INT xX25LinkDefPktSize

1.3.6.1.4.1.33.20.7.1.8

INTEGER

read-write

Default packet size for this link.

INT xX25LinkDefThrptClassIn

1.3.6.1.4.1.33.20.7.1.9

INTEGER

read-write

Default input throughput class for this link.

INT xX25LinkDefThrptClassOut

1.3.6.1.4.1.33.20.7.1.10

INTEGER

read-write

Default output throughput class for this link.

INT xX25LinkDefThrptClassInMsk

1.3.6.1.4.1.33.20.7.1.11

INTEGER

read-write

Default incoming throughput class mask for this link.

INT xX25LinkDefThrptClassOutMsk

1.3.6.1.4.1.33.20.7.1.12

INTEGER

read-write

Default outgoing throughput class mask for this link.

INT xX25LinkFlowCtrlNeg

1.3.6.1.4.1.33.20.7.1.13

INTEGER

read-write

Indicates whether flow control negotiation will be performed on this link.

INT xX25LinkThrptClassNeg

1.3.6.1.4.1.33.20.7.1.14

INTEGER

read-write

Indicates whether throughput class negotiation will be performed on this link.

INT xX25LinkICallBarred

1.3.6.1.4.1.33.20.7.1.15

INTEGER

read-write

Indicates whether incoming calls are barred on this link.

INT xX25LinkOCallBarred

1.3.6.1.4.1.33.20.7.1.16

INTEGER

read-write

Indicates whether outgoing calls are barred on this link.

INT xX25LinkOneOut

1.3.6.1.4.1.33.20.7.1.17

INTEGER

read-write

Indicates whether the link supports one way outgoing channels.

INT xX25LinkOneIn

1.3.6.1.4.1.33.20.7.1.18

INTEGER

read-write

Indicates whether the link supports one way incoming channels.

INT xX25LinkRevChargeAcc

1.3.6.1.4.1.33.20.7.1.19

INTEGER

read-write

Indicates whether reverse charge acceptance may be configured on this link.

INT xX25LinkLocalChargePrevent

1.3.6.1.4.1.33.20.7.1.20

INTEGER

read-write

Indicates whether local charge prevention may be configured on the link.

INT xX25LinkRpoa

1.3.6.1.4.1.33.20.7.1.21

INTEGER

read-write

Indicates whether RPOA may be configured on the link.

INT xX25LinkNui

1.3.6.1.4.1.33.20.7.1.22

INTEGER

read-write

Indicates whether NUI may be configured on the link.

INT xX25LinkMaxPacketSize

1.3.6.1.4.1.33.20.7.1.23

INTEGER

read-write

Maximum size of packets on the link.

INT xX25LinkInsertCallingAddr

1.3.6.1.4.1.33.20.7.1.24

INTEGER

read-write

Indicates whether the caller's X.121 address should be inserted into the the call request packet.

INT xX25LinkDefaultInterface

1.3.6.1.4.1.33.20.7.1.25

INTEGER

read-write

The ITouch logical ifIndex to which new SVCs should be attached, when 'accept unconfigured calls' is enabled. A value of zero means 'create a new interface'.

xApple

1.3.6.1.4.1.33.21

xAppleSystem

1.3.6.1.4.1.33.21.1

INT appleState

1.3.6.1.4.1.33.21.1.1

INTEGER

read-write

Controls whether the router will perform AppleTalk routing.

INT appleStatus

1.3.6.1.4.1.33.21.1.2

INTEGER

read-only

Indicates whether the router is performing AppleTalk routing.

INT appleStatusIf

1.3.6.1.4.1.33.21.1.3

INTEGER

read-only

The ifIndex of the bad interface if appleStatus is 'badConfig'.

xApplePort

1.3.6.1.4.1.33.21.2

applePortTable

1.3.6.1.4.1.33.21.2.1

not-accessible

Table of fields indexed by interface.

applePortEntry

1.3.6.1.4.1.33.21.2.1.1

not-accessible

A particular entry.

INT applePortIndex

1.3.6.1.4.1.33.21.2.1.1.1

INTEGER

read-only

The index of the interface; same as IfIndex.

INT applePortProtocolPriority

1.3.6.1.4.1.33.21.2.1.1.2

INTEGER

read-write

This value defines the priority at which all Apple routed packets will be placed on the WAN output queue.

INT applePortArpInterval

1.3.6.1.4.1.33.21.2.1.1.3

INTEGER

read-write

The interval at which ARP messages should be sent during the process of selecting a network address.

INT applePortArpRetransmitCount

1.3.6.1.4.1.33.21.2.1.1.4

INTEGER

read-write

The number of ARP messages that should be sent during the process of selecting a network address.

INT applePortChecksum

1.3.6.1.4.1.33.21.2.1.1.5

INTEGER

read-write

Controls whether checksums are generated on all DDP packets sent out the interface.

CTR applePortPacketsIn

1.3.6.1.4.1.33.21.2.1.1.6

Counter

read-only

The number of AppleTalk packets received on this interface.

CTR applePortPacketsOut

1.3.6.1.4.1.33.21.2.1.1.7

Counter

read-only

The number of AppleTalk packets transmitted on this interface.

CTR applePortForwardsIn

1.3.6.1.4.1.33.21.2.1.1.8

Counter

read-only

The number of AppleTalk packets received on this interface which were not addressed to this router.

CTR applePortForwardsOut

1.3.6.1.4.1.33.21.2.1.1.9

Counter

read-only

The number of AppleTalk packets transmitted on this interface which were not originated by this router.

ADR applePortNetAddress

1.3.6.1.4.1.33.21.2.1.1.10

DdpAddress

read-only

The actual address used by this port.

OCT applePortNetStart

1.3.6.1.4.1.33.21.2.1.1.11

OCTET STRING

read-only

The start of the actual network range used by this port.

OCT applePortNetEnd

1.3.6.1.4.1.33.21.2.1.1.12

OCTET STRING

read-only

The end of the actual network range used by this port.

CTR applePortErrors

1.3.6.1.4.1.33.21.2.1.1.13

Counter

read-only

The number of AppleTalk packets received in error.

INT applePortLastError

1.3.6.1.4.1.33.21.2.1.1.14

INTEGER

read-only

The type of the most recent error counted in applePortErrors. A value of zero means no error.

TIK applePortLastErrorTime

1.3.6.1.4.1.33.21.2.1.1.15

TimeTicks

read-only

The value of sysUptime when applePortLastError last occured.

OCT applePortLastErrorData

1.3.6.1.4.1.33.21.2.1.1.16

OCTET STRING

read-only

The first 22 bytes of the packet from applePortLastError.

INT applePortBringBackTime

1.3.6.1.4.1.33.21.2.1.1.17

INTEGER

read-write

The number of seconds to shut down an interface while waiting for a manager-initiated configuration change to propagate.

INT applePortUseNeighborNotify

1.3.6.1.4.1.33.21.2.1.1.18

INTEGER

read-write

Controls generation of neighbor notify messages when an interface is disabled or system is shut down.

INT applePortRouterType

1.3.6.1.4.1.33.21.2.1.1.19

INTEGER

read-write

Type of router operation over this port.

applePortZoneTable

1.3.6.1.4.1.33.21.2.2

not-accessible

Table of fields indexed by interface and zone.

applePortZoneEntry

1.3.6.1.4.1.33.21.2.2.1

not-accessible

A particular entry.

INT applePortZoneIndex

1.3.6.1.4.1.33.21.2.2.1.1

INTEGER

read-only

The index of the interface; same as IfIndex.

OCT applePortZoneName

1.3.6.1.4.1.33.21.2.2.1.2

OCTET STRING

read-only

The name of the zone.

INT applePortZoneStatus

1.3.6.1.4.1.33.21.2.2.1.3

INTEGER

read-write

The status of the entry. Set to 'invalid' to remove the entry.

xApplePolicy

1.3.6.1.4.1.33.21.3

applePortExportTable

1.3.6.1.4.1.33.21.3.1

not-accessible

Table of fields indexed by interface and zone.

applePortExportEntry

1.3.6.1.4.1.33.21.3.1.1

not-accessible

A particular entry.

INT applePortExportIndex

1.3.6.1.4.1.33.21.3.1.1.1

INTEGER

read-only

The index of the interface; same as IfIndex.

OCT applePortExportZone

1.3.6.1.4.1.33.21.3.1.1.2

OCTET STRING

read-only

The name of the zone.

OCT applePortExportName

1.3.6.1.4.1.33.21.3.1.1.3

OCTET STRING

read-only

The name of the name.

OCT applePortExportType

1.3.6.1.4.1.33.21.3.1.1.4

OCTET STRING

read-only

The name of the type.

INT applePortExportAction

1.3.6.1.4.1.33.21.3.1.1.5

INTEGER

read-write

Control whether the data will be hidden or advertised.

INT applePortExportStatus

1.3.6.1.4.1.33.21.3.1.1.6

INTEGER

read-write

The status of the entry. Set to 'invalid' to remove the entry.

applePortImportTable

1.3.6.1.4.1.33.21.3.2

not-accessible

Table of fields indexed by interface and zone.

applePortImportEntry

1.3.6.1.4.1.33.21.3.2.1

not-accessible

A particular entry.

INT applePortImportIndex

1.3.6.1.4.1.33.21.3.2.1.1

INTEGER

read-only

The index of the interface; same as IfIndex.

OCT applePortImportZone

1.3.6.1.4.1.33.21.3.2.1.2

OCTET STRING

read-only

The name of the zone.

OCT applePortImportName

1.3.6.1.4.1.33.21.3.2.1.3

OCTET STRING

read-only

The name of the name.

OCT applePortImportType

1.3.6.1.4.1.33.21.3.2.1.4

OCTET STRING

read-only

The name of the type.

INT applePortImportAction

1.3.6.1.4.1.33.21.3.2.1.5

INTEGER

read-write

Control whether the data will be discarded or accepted.

INT applePortImportStatus

1.3.6.1.4.1.33.21.3.2.1.6

INTEGER

read-write

The status of the entry. Set to 'invalid' to remove the entry.

xAppleNbp

1.3.6.1.4.1.33.21.4

appleNbpTable

1.3.6.1.4.1.33.21.4.1

not-accessible

Table of fields indexed by interface and zone.

appleNbpEntry

1.3.6.1.4.1.33.21.4.1.1

not-accessible

A particular entry.

OCT appleNbpZone

1.3.6.1.4.1.33.21.4.1.1.1

OCTET STRING

read-only

The name of the zone.

OCT appleNbpName

1.3.6.1.4.1.33.21.4.1.1.2

OCTET STRING

read-only

The name of the name.

OCT appleNbpType

1.3.6.1.4.1.33.21.4.1.1.3

OCTET STRING

read-only

The name of the type.

ADR appleNbpNode

1.3.6.1.4.1.33.21.4.1.1.4

DdpAddress

read-only

The address of the node who offers the service associated with this entry.

INT appleNbpSocket

1.3.6.1.4.1.33.21.4.1.1.5

INTEGER

read-only

The socket of the service associated with this entry. The value 0 means no socket.

xAppleTraffic

1.3.6.1.4.1.33.21.5

INT appleTrafficSort

1.3.6.1.4.1.33.21.5.1

INTEGER

read-write

Setting to EXECUTE causes the most recent traffic information to be sorted into the appleTrafficTable. The sorting precedence is: decreasing percentage, increasing destination address, increasing source address, and increasing interface number. Setting to READY has no effect.

appleTrafficTable

1.3.6.1.4.1.33.21.5.2

not-accessible

A list of traffic entries, sorted in the order specified by appleTrafficSort.

appleTrafficEntry

1.3.6.1.4.1.33.21.5.2.1

not-accessible

Parameter values for an Filter filter.

INT appleTrafficIndex

1.3.6.1.4.1.33.21.5.2.1.1

INTEGER

read-only

Identification of a traffic entry.

INT appleTrafficPercent

1.3.6.1.4.1.33.21.5.2.1.2

INTEGER

read-only

The percent of total traffic that this traffic entryrepresents, in tenths of a percent.

ADR appleTrafficDst

1.3.6.1.4.1.33.21.5.2.1.3

DdpAddress

read-only

The destination to which the traffic entry applies.

ADR appleTrafficSrc

1.3.6.1.4.1.33.21.5.2.1.4

DdpAddress

read-only

The source to which the traffic entry applies.

INT appleTrafficIntf

1.3.6.1.4.1.33.21.5.2.1.5

INTEGER

read-only

The inbound interface to which the traffic entry applies.

INT appleTrafficMonitoring

1.3.6.1.4.1.33.21.5.3

INTEGER

read-write

Controls whether internet traffic information will be recorded.

xAppleRemoteAccess

1.3.6.1.4.1.33.21.6

STR arapPassword

1.3.6.1.4.1.33.21.6.1

DisplayString

read-write

The server's ARAP password. To increase security, Gets of this object return the NULL string.

STR arapDefaultZoneName

1.3.6.1.4.1.33.21.6.2

DisplayString

read-write

The name of the AppleTalk zone that the server should try to choose at boot time.

arapPortTable

1.3.6.1.4.1.33.21.6.3

not-accessible

A list of ARAP port entries.

arapPortEntry

1.3.6.1.4.1.33.21.6.3.1

not-accessible

ARAP parameter values for a port.

INT arapPortEnabled

1.3.6.1.4.1.33.21.6.3.1.1

INTEGER

read-write

Indicates if ARAP connections are allowed on this port.

INT arapPortZoneAccess

1.3.6.1.4.1.33.21.6.3.1.2

INTEGER

read-write

Indicates the AppleTalk zones that ARAP connections on this port may access: none, local, all, or named zone.

STR arapPortZoneName

1.3.6.1.4.1.33.21.6.3.1.3

DisplayString

read-write

If this port's arapPortZoneAccess field indicates a named zone, this field contains the zone name.

INT arapPortMaxConnectTime

1.3.6.1.4.1.33.21.6.3.1.4

INTEGER

read-write

Maximum number of minutes a single ARAP connection may exist on the port before a server initiated disconnect. To set no limit on the amount of time that an ARAP user may be connected, set this object to -1.

INT arapPortGuestLoginsOk

1.3.6.1.4.1.33.21.6.3.1.5

INTEGER

read-write

Indicates if 'Guest' logins (with no password) are allowed on the port.

INT arapPortTimeConnected

1.3.6.1.4.1.33.21.6.3.1.6

INTEGER

read-only

Indicates the number of minutes the current ARAP connection has been established on the port, rounded up to the nearest minute. Gets return -1 if no ARAP user is currently connected on the port or if ARAP is not enabled on the port.

INT arapPortTimeRemaining

1.3.6.1.4.1.33.21.6.3.1.7

INTEGER

read-write

Indicates the number of minutes the current ARAP connection may remain on the port before a server initiated disconnect will occur, rounded up to the nearest minute. To set no limit on the amount of time that the current ARAP user may continue to be connected, set this object to the maximum value in the range. Gets return -1 if no ARAP user is currently connected on the port or if ARAP is not enabled on the port. Gets also return -1 if there is a user connected and there is no limit on the amount of time that the current user may be connected.

xFrameRelay

1.3.6.1.4.1.33.23

xFrCircuitTable

1.3.6.1.4.1.33.23.1

not-accessible

A table containing iTouch extensions to the standard Frame Relay Circuit table.

xFrCircuitEntry

1.3.6.1.4.1.33.23.1.1

not-accessible

Entry parameters.

INT xFrCircuitIf

1.3.6.1.4.1.33.23.1.1.1

INTEGER

read-write

The ifIndex value of the corresponding ifEntry, that is, the interface to which the DLCI is attached.

xLink

1.3.6.1.4.1.33.24

xLinkBasic

1.3.6.1.4.1.33.24.1

linkTable

1.3.6.1.4.1.33.24.1.1

not-accessible

A list of links.

linkEntry

1.3.6.1.4.1.33.24.1.1.1

not-accessible

Link entry.

CTR linkNoBuffers

1.3.6.1.4.1.33.24.1.1.1.1

Counter

read-only

The number of packets discarded because of lack of buffers.

CTR linkDelayExceeded

1.3.6.1.4.1.33.24.1.1.1.2

Counter

read-only

The number of packets discarded because they were held to long.

CTR linkOutputQFull

1.3.6.1.4.1.33.24.1.1.1.3

Counter

read-only

The number of packets discarded because the output queue was full.

CTR linkDownTime

1.3.6.1.4.1.33.24.1.1.1.4

Counter

read-only

Total number of seconds that the link has been down.

CTR linkDownCount

1.3.6.1.4.1.33.24.1.1.1.5

Counter

read-only

Number of times that the link has been down.

TIK linkDownLastStart

1.3.6.1.4.1.33.24.1.1.1.6

TimeTicks

read-only

Value of sysUpTime when the link last went down. If the link is up the value is 0.

INT linkStatus

1.3.6.1.4.1.33.24.1.1.1.7

INTEGER

read-only

The status of the link

CTR linkLostBuffers

1.3.6.1.4.1.33.24.1.1.1.8

Counter

read-only

Number of packets discarded because of lost buffers

linkResourceTable

1.3.6.1.4.1.33.24.1.2

not-accessible

A list of link resources.

linkResourceEntry

1.3.6.1.4.1.33.24.1.2.1

not-accessible

link entry.

INT linkResourceType

1.3.6.1.4.1.33.24.1.2.1.1

INTEGER

read-only

The resource type.

GAU linkResourceCurrent

1.3.6.1.4.1.33.24.1.2.1.2

Gauge

read-only

The current percent of the resource used.

GAU linkResourceHigh

1.3.6.1.4.1.33.24.1.2.1.3

Gauge

read-only

The highest percent of the resource used.

GAU linkResourceAverage

1.3.6.1.4.1.33.24.1.2.1.4

Gauge

read-only

The average percent of the resource used.

xWan

1.3.6.1.4.1.33.24.3

wanTable

1.3.6.1.4.1.33.24.3.1

not-accessible

A list of WANs.

wanEntry

1.3.6.1.4.1.33.24.3.1.1

not-accessible

WAN entry.

INT wanProtocol

1.3.6.1.4.1.33.24.3.1.1.1

INTEGER

read-write

Controls the protocol run on the link, changes ifType, typically to 'other'.

INT wanCompressionAdminStatus

1.3.6.1.4.1.33.24.3.1.1.2

INTEGER

read-write

Controls whether link compression will be run if the link is running the xyplex protocol. Auto will enable compression for links slower than 67000.

INT wanMaxForwardDelay

1.3.6.1.4.1.33.24.3.1.1.3

INTEGER

read-write

The number of milliseconds that a packet may be held on the Wan link before it will be discarded. The value 0 indicates no limit.

INT wanMaxMultiForwardDelay

1.3.6.1.4.1.33.24.3.1.1.4

INTEGER

read-write

The number of milliseconds that a multicast packet may be held on the Wan link before it will be discarded. The value 0 indicates no delay.

INT wanAdminSpeed

1.3.6.1.4.1.33.24.3.1.1.5

INTEGER

read-write

The speed that the software should use for the wan link. The value 0 indicates that the measured speed should be used.

INT wanCompressionOperStatus

1.3.6.1.4.1.33.24.3.1.1.6

INTEGER

read-only

If the link is running the Xyplex protocol, indicates whether link compression is running.

xConcentrator

1.3.6.1.4.1.33.25

INT concentratorMode

1.3.6.1.4.1.33.25.1

INTEGER

read-write

This variable controls the ring mode of the chassis.

INT concentratorManagement

1.3.6.1.4.1.33.25.2

INTEGER

read-write

This variable controls the ability to manage token ring concentrators.

INT concentratorBuildTopology

1.3.6.1.4.1.33.25.3

INTEGER

read-write

This variable causes the chassis token ring topology database to be constructed.

TIK concentratorTopologyLastBuild

1.3.6.1.4.1.33.25.4

TimeTicks

read-only

This variable contains the value of sysUpTime at the time the chassis token ring topology database was last constructed.

INT concentratorChassisRingDefaults

1.3.6.1.4.1.33.25.5

INTEGER

read-write

This variable causes the chassis ring area of NVS to be set to defaults.

concentratorSlotTable

1.3.6.1.4.1.33.25.6

not-accessible

Table of descriptive and status information about a Token Ring Concentrator.

concentratorSlotEntry

1.3.6.1.4.1.33.25.6.1

not-accessible

An entry in the table containing information about a specific concentrator.

INT concentratorSlotIndex

1.3.6.1.4.1.33.25.6.1.1

INTEGER

read-only

This variable identifies the slot of the chassis.

IOT concentratorSlotIOType

1.3.6.1.4.1.33.25.6.1.2

IOType

read-only

This variable represents the type of the I/O card.

INT concentratorSlotIOFirmwareVersion

1.3.6.1.4.1.33.25.6.1.3

INTEGER

read-only

This variable represents the revision level of the firmware on the I/O card.

INT concentratorSlotIOOperStatus

1.3.6.1.4.1.33.25.6.1.4

INTEGER

read-only

This variable represents the current operating status of the I/O card.

TIK concentratorSlotUptime

1.3.6.1.4.1.33.25.6.1.5

TimeTicks

read-only

This variable contains the value of sysUpTime at the time the concentrator was last reset.

INT concentratorSlotNumPorts

1.3.6.1.4.1.33.25.6.1.6

INTEGER

read-only

This variable represents the number of Token Ring ports supported by the concentrator.

concentratorSlotRingTable

1.3.6.1.4.1.33.25.7

not-accessible

Table of descriptive and status information about the rings of a controller.

concentratorSlotRingEntry

1.3.6.1.4.1.33.25.7.1

not-accessible

An entry in the table containing information about a specific ring.

INT concentratorSlotSlotIndex

1.3.6.1.4.1.33.25.7.1.1

INTEGER

read-only

This variable identifies the slot of the chassis.

INT concentratorSlotRingIndex

1.3.6.1.4.1.33.25.7.1.2

INTEGER

read-only

This variable identifies the ring within the slot.

STR concentratorSlotRingAdminName

1.3.6.1.4.1.33.25.7.1.3

DisplayString

read-write

This variable represents the user defined name of the ring.

INT concentratorSlotRingAdminSpeed

1.3.6.1.4.1.33.25.7.1.4

INTEGER

read-write

This variable represents the user defined speed of the ring.

INT concentratorSlotRingAdminState

1.3.6.1.4.1.33.25.7.1.5

INTEGER

read-write

This variable defines whether the slot ring is to be inserted into the defined chassis ring or is to be isolated.

INT concentratorSlotRingZero

1.3.6.1.4.1.33.25.7.1.6

INTEGER

read-write

This variable is used to control the slot ring's counters. The agent always returns 'ready' for this value. Setting the value to 'ready' has no effect.

TIK concentratorSlotRingSinceZero

1.3.6.1.4.1.33.25.7.1.7

TimeTicks

read-only

This variable reflects the number of time ticks since the counters were last zeroed. This variable is set to zero when concentratoSlotRingZero is written with the value 2

LET concentratorSlotRingChassisRing

1.3.6.1.4.1.33.25.7.1.8

Letter

read-write

This variable represents the chassis ring into which the slot ring is to be inserted if it is to be inserted.

STR concentratorSlotRingOperName

1.3.6.1.4.1.33.25.7.1.9

DisplayString

read-only

This variable represents the name currently being used to identify the slot ring. If inserted, this name will be the user defined name of the chassis ring into which it is inserted. If isolated, this name will be the user defined name of the slot ring.

INT concentratorSlotRingOperSpeed

1.3.6.1.4.1.33.25.7.1.10

INTEGER

read-only

This variable represents the current speed of the slot ring. If inserted, this speed will be the user defined speed of the chassis ring into which it is inserted. If isolated, this speed will be the user defined speed of the slot ring.

INT concentratorSlotRingOperState

1.3.6.1.4.1.33.25.7.1.11

INTEGER

read-only

This variable indicates whether the slot ring is inserted into the defined chassis ring or is isolated.

OCT concentratorSlotRingChassisRingsAllowed

1.3.6.1.4.1.33.25.7.1.12

OCTET STRING

read-only

The list of chassis rings into which this slot ring may be inserted. The OCTET STRING contains a bit map, with a bit for 'none' (indicating it may be isolated) and one bit for each chassis ring, and enough octets for all chassis rings. The high order bit of the first octet corresponds to 'none' and each subsequent bit in ascending order corresponds to the chassis rings in order beginning with A.

concentratorChassisRingTable

1.3.6.1.4.1.33.25.8

not-accessible

Table of descriptive and status information about the rings of a the chassis.

concentratorChassisRingEntry

1.3.6.1.4.1.33.25.8.1

not-accessible

An entry in the table containing information about a specific ring.

LET concentratorChassisRingIndex

1.3.6.1.4.1.33.25.8.1.1

Letter

read-only

This variable identifies the ring of the chassis.

STR concentratorChassisRingName

1.3.6.1.4.1.33.25.8.1.2

DisplayString

read-write

This variable represents the name of the ring. All segments of a given chassis ring will have the same base name, All segment of that ring will appear as 'baseNamex' where x is the identified segment

INT concentratorChassisRingSpeed

1.3.6.1.4.1.33.25.8.1.3

INTEGER

read-write

This variable indicates the speed of the ring segment. All segments of a given chassis ring are at the same speed.

CTR concentratorChassisRingTopologyChanges

1.3.6.1.4.1.33.25.8.1.4

Counter

read-only

This variable reflects the number of times the topology has changed for this ring. This variable is set to zero when concentratorChassisRingZero is written with the value 2.

INT concentratorChassisRingZero

1.3.6.1.4.1.33.25.8.1.5

INTEGER

read-write

This variable is used to control the ring's counters. The agent always returns 'ready' for this value. Setting the value to 'ready' has no effect.

TIK concentratorChassisRingSinceZero

1.3.6.1.4.1.33.25.8.1.6

TimeTicks

read-only

This variable reflects the number of time ticks since the counters were last zeroed. This variable is set to zero when concentratoChassisRingZero is written with the value 2

concentratorChassisRingTopologyTable

1.3.6.1.4.1.33.25.9

not-accessible

Table of descriptive and status information about the segments of the chassis rings.

concentratorChassisRingTopologyEntry

1.3.6.1.4.1.33.25.9.1

not-accessible

An entry in the table containing information about a specific ring segment.

INT concentratorChassisRingTopologySlotIndex

1.3.6.1.4.1.33.25.9.1.1

INTEGER

read-only

This variable identifies a slot number that is included in the ring segment.

LET concentratorChassisRingTopologyRingIndex

1.3.6.1.4.1.33.25.9.1.2

Letter

read-only

This variable identifies the ring of the chassis.

INT concentratorChassisRingTopologyWrapUp

1.3.6.1.4.1.33.25.9.1.3

INTEGER

read-only

This variable represents the upper wrap state for the chassis ring which passes through this slot. By setting this variable to Wrap, the user can create a segment which would contain this slot, and all slots above this one which are on the same segment.

INT concentratorChassisRingTopologyWrapDown

1.3.6.1.4.1.33.25.9.1.4

INTEGER

read-only

This variable represents the lower wrap state for the chassis ring which passes through this slot. By setting this variable to Wrap, the user can create a segment which would contain this slot, and all slots below this one which are on the same segment.

INT concentratorChassisRingTopologyUpState

1.3.6.1.4.1.33.25.9.1.5

INTEGER

read-only

This variable represents the type of upper wrap for the chassis ring which passes through this slot.

INT concentratorChassisRingTopologyDownState

1.3.6.1.4.1.33.25.9.1.6

INTEGER

read-only

This variable represents the type of lower wrap for the chassis ring which passes through this slot.

INT concentratorChassisRingTopologySegment

1.3.6.1.4.1.33.25.9.1.7

INTEGER

read-only

This variable represents the segment number for the chassis ring which passes through this slot.

STR concentratorChassisRingTopologyName

1.3.6.1.4.1.33.25.9.1.8

DisplayString

read-only

This variable represents the name of the ring segment. The ring segment name is the base ring name with '-segment number' appended to the end.

INT concentratorChassisRingTopologySpeed

1.3.6.1.4.1.33.25.9.1.9

INTEGER

read-only

This variable indicates the speed of the ring segment. All segments of a given chassis ring are at the same speed as the parent ring.

IOT concentratorChassisRingTopologyCardType

1.3.6.1.4.1.33.25.9.1.10

IOType

read-only

This variable represents the type of the I/O card.

CTR concentratorChassisRingTopologyAutoUpChanges

1.3.6.1.4.1.33.25.9.1.11

Counter

read-only

This variable reflects the number of times the topology has changed for this ring due to a dynamic wrap up. This variable is set to zero when concentratorSlotRingZero is written with the value 2.

CTR concentratorChassisRingTopologyAutoDownChanges

1.3.6.1.4.1.33.25.9.1.12

Counter

read-only

This variable reflects the number of times the topology has changed for this ring due to a dynamic wrap down. This variable is set to zero when concentratorSlotRingZero is written with the value 2.

concentratorPortTable

1.3.6.1.4.1.33.25.10

not-accessible

Table of information and status concerning the ports of a concentrator.

concentratorPortEntry

1.3.6.1.4.1.33.25.10.1

not-accessible

An entry in the table containing control and status information for a port.

INT concentratorPortSlotIndex

1.3.6.1.4.1.33.25.10.1.1

INTEGER

read-only

This variable identifies the slot of the chassis.

INT concentratorPortIndex

1.3.6.1.4.1.33.25.10.1.2

INTEGER

read-only

This variable identifies target port.

STR concentratorPortName

1.3.6.1.4.1.33.25.10.1.3

DisplayString

read-write

This variable represents the user defined name of the port.

INT concentratorPortType

1.3.6.1.4.1.33.25.10.1.4

INTEGER

read-only

This variable represents the type of connector provided for the port.

INT concentratorPortZero

1.3.6.1.4.1.33.25.10.1.5

INTEGER

read-write

This variable is used to control the ports counters. The agent always returns 'ready' for this value. Setting the value to 'ready' has no effect.

TIK concentratorPortSinceZero

1.3.6.1.4.1.33.25.10.1.6

TimeTicks

read-only

This variable reflects the number of time ticks since the counters were las zeroed. This variable is set to zero when concentratorPortZero is written with the value 2

INT concentratorPortAdminState

1.3.6.1.4.1.33.25.10.1.7

INTEGER

read-write

This variable reflects the enable/disable state of the port.

INT concentratorPortOperState

1.3.6.1.4.1.33.25.10.1.8

INTEGER

read-only

This variable reflects the enable/disable state of the port.

CTR concentratorPortInsertions

1.3.6.1.4.1.33.25.10.1.9

Counter

read-only

This variable reflects the number of times the port was inserted into the ring.

CTR concentratorPortInsertFailures

1.3.6.1.4.1.33.25.10.1.10

Counter

read-only

This variable reflects the number of times the port was not inserted due to a data rate mismatch.

INT concentratorPortAdminInsert

1.3.6.1.4.1.33.25.10.1.11

INTEGER

read-write

This variable reflects the desired insertion of the port. Auto indicates to insert the port into the first slot ring with a matching data rate beginning with 1.

INT concentratorPortOperInsert

1.3.6.1.4.1.33.25.10.1.12

INTEGER

read-only

This variable reflects the slot ring to which the port is attached.

INT concentratorPortSpeed

1.3.6.1.4.1.33.25.10.1.13

INTEGER

read-only

This variable reflects the measured speed of the port.

INT concentratorPortAdminLoopback

1.3.6.1.4.1.33.25.10.1.14

INTEGER

read-write

This variable reflects the whether this port will be inserted into a ring or the data loop backed.

INT concentratorPortStationType

1.3.6.1.4.1.33.25.10.1.15

INTEGER

read-write

This variable reflects the concentrator port type.

INT concentratorPortAdminTrunkInsert

1.3.6.1.4.1.33.25.10.1.16

INTEGER

read-write

This variable is used to control the insertion of trunk ports. When set to 'execute' the trunk port will be inserted into the ring immediately and not wait for the trunk timer to expire. The agent always returns 'ready' for this value. Setting the value to 'ready' has no effect.

OCT concentratorPortSlotRingsAllowed

1.3.6.1.4.1.33.25.10.1.17

OCTET STRING

read-only

The list of slot rings into which this port may be inserted. The OCTET STRING contains a bit map, with a bit for 'none' (indicating it may be isolated) and one bit for each slot ring, and enough octets for all slot rings. The high order bit of the first octet corresponds to 'none' and each subsequent bit in ascending order corresponds to the slot rings in order beginning with 1.

xIsis

1.3.6.1.4.1.33.26

xIsisSystem

1.3.6.1.4.1.33.26.1

xIsisSysTable

1.3.6.1.4.1.33.26.1.1

not-accessible

The set of instances of the Integrated IS-IS protocol existing on the system.

xIsisSysEntry

1.3.6.1.4.1.33.26.1.1.1

not-accessible

Each row defines information specific to a single instance of the protocol existing on the system.

INT xIsisSysInstance

1.3.6.1.4.1.33.26.1.1.1.1

INTEGER

read-only

The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.

INT xIsisSysExistState

1.3.6.1.4.1.33.26.1.1.1.2

INTEGER

read-only

The validity of this instance of the Integrated IS-IS protocol. This object follows the existenceState behaviour.

INT xIsisSysVersion

1.3.6.1.4.1.33.26.1.1.1.3

INTEGER

read-only

The version number of the IS-IS protocol to which this instance conforms. This value must be set by the implementation when the row is valid.

INT xIsisSysType

1.3.6.1.4.1.33.26.1.1.1.4

INTEGER

read-write

The type of this instance of the Integrated IS-IS protocol. This object follows the replaceOnlyWhileDisabled behaviour.

OCT xIsisSysNET

1.3.6.1.4.1.33.26.1.1.1.5

OCTET STRING

read-only

The ID for this instance of the Integrated IS-IS protocol. This value is appended to each of the instance's area addresses to form the Network Entity Titles valid for this instance. The derivation of a value for this object is implementation-specific. Some implementations may assign values and not permit write access, others may require the value to be set manually.

INT xIsisSysMaxPathSplits

1.3.6.1.4.1.33.26.1.1.1.6

INTEGER

read-write

Maximum number of paths with equal routing metric value which it is permitted to split between. This object follows the replaceOnlyWhileDisabled behaviour.

INT xIsisSysMinLSPTransInt

1.3.6.1.4.1.33.26.1.1.1.7

INTEGER

read-write

Minimum interval, in seconds, between re-transmission of an LSP. This object follows the resettingTimer behaviour.

INT xIsisSysMaxLSPGenInt

1.3.6.1.4.1.33.26.1.1.1.8

INTEGER

read-write

Maximum interval, in seconds, between generated LSPs by this instance. This object follows the resettingTimer behaviour.

INT xIsisSysMinBroadLSPTransInt

1.3.6.1.4.1.33.26.1.1.1.9

INTEGER

read-write

Minimum interval, in milliseconds, between transmission of LSPs on a broadcast circuit. This object follows the resettingTimer behaviour. This timer shall be capable of a resolution not coarser than 10 milliseconds.

INT xIsisSysCompSNPInt

1.3.6.1.4.1.33.26.1.1.1.10

INTEGER

read-write

Interval, in seconds, between generation of Complete Sequence Numbers PDUs by a designated Intermediate System on a broadcast circuit. This object follows the resettingTimer behaviour.

INT xIsisSysOrigL1LSPBuffSize

1.3.6.1.4.1.33.26.1.1.1.11

INTEGER

read-write

The maximum size of Level 1 LSPs and SNPs originated by this instance. This object follows the replaceOnlyWhileDisabled behaviour.

INT xIsisSysMaxAreaAddr

1.3.6.1.4.1.33.26.1.1.1.12

INTEGER

read-write

The maximum number of area addresses to be permitted for the area in which this instance exists. Note that all Intermediate Systems in the same area must have the same value configured for this attribute if correct operation is to be assumed. This object follows the replaceOnlyWhileDisabled behaviour.

INT xIsisSysMinLSPGenInt

1.3.6.1.4.1.33.26.1.1.1.13

INTEGER

read-write

Minimum interval, in seconds, between successive generation of LSPs with the same LSPID by this instance. This object follows the resettingTimer behaviour.

INT xIsisSysPollESHelloRate

1.3.6.1.4.1.33.26.1.1.1.14

INTEGER

read-write

The value, in seconds, to be used for the suggested ES configuration timer in ISH PDUs when soliciting the ES configuration.

INT xIsisSysPartSNPInt

1.3.6.1.4.1.33.26.1.1.1.15

INTEGER

read-write

Minimum interval between sending Partial Sequence Number PDUs. This object follows the resettingTimer behaviour.

INT xIsisSysWaitTime

1.3.6.1.4.1.33.26.1.1.1.16

INTEGER

read-write

Number of seconds to delay in waiting state before entering on state. This object follows the resettingTimer behaviour.

INT xIsisSysDRISISHelloTimer

1.3.6.1.4.1.33.26.1.1.1.17

INTEGER

read-write

The interval, in seconds, between the generation of IIH PDUs by the designated IS on a LAN. This object follows the resettingTimer behaviour.

INT xIsisSysOperState

1.3.6.1.4.1.33.26.1.1.1.18

INTEGER

read-write

The operational state of this instance of the Integrated IS-IS protocol. Setting this object to the value on when its current value is off enables operation of this instance of the Integrated IS-IS protocol.

INT xIsisSysL1State

1.3.6.1.4.1.33.26.1.1.1.19

INTEGER

read-only

The state of the Level 1 database.

CTR xIsisSysCorrLSPs

1.3.6.1.4.1.33.26.1.1.1.20

Counter

read-only

Number of corrupted LSPs detected.

CTR xIsisSysL1LSPDbaseOloads

1.3.6.1.4.1.33.26.1.1.1.21

Counter

read-only

Number of times the LSP L1 database has become overloaded.

CTR xIsisSysManAddrsDropFromArea

1.3.6.1.4.1.33.26.1.1.1.22

Counter

read-only

Number of times a manual address has been dropped from the area.

CTR xIsisSysAttmptsToExMaxSeqNum

1.3.6.1.4.1.33.26.1.1.1.23

Counter

read-only

Number of times the IS has attempted to exceed the maximum sequence number.

CTR xIsisSysSeqNumSkips

1.3.6.1.4.1.33.26.1.1.1.24

Counter

read-only

Number of times a sequence number skip has occurred.

CTR xIsisSysOwnLSPPurges

1.3.6.1.4.1.33.26.1.1.1.25

Counter

read-only

Number of times a zero-aged copy of the system's own LSP is received from some other node.

CTR xIsisSysIDFieldLenMismatches

1.3.6.1.4.1.33.26.1.1.1.26

Counter

read-only

Number of times a PDU is received with a different value for ID field length to that of the receiving system.

CTR xIsisSysMaxAreaMis

1.3.6.1.4.1.33.26.1.1.1.27

Counter

read-only

Number of times a PDU is received with a different value for MaximumAreaAddresses from that of the receiving system.

INT xIsisSysOrigL2LSPBuffSize

1.3.6.1.4.1.33.26.1.1.1.28

INTEGER

read-write

The maximum size of Level 2 LSPs and SNPs originated by this system. This object follows the replaceOnlyWhileDisabled behaviour.

INT xIsisSysL2State

1.3.6.1.4.1.33.26.1.1.1.29

INTEGER

read-only

The state of the Level 2 database.

CTR xIsisSysL2LSPDbaseOloads

1.3.6.1.4.1.33.26.1.1.1.30

Counter

read-only

Number of times the Level 2 LSP database has become overloaded.

INT xIsisSysMaxAreaCheck

1.3.6.1.4.1.33.26.1.1.1.31

INTEGER

read-write

When on, enables checking of maximum area addresses per IS version of ISO10589.

xIsisManAreaAddrTable

1.3.6.1.4.1.33.26.1.2

not-accessible

The set of manual area addresses configured on this Intermediate System.

xIsisManAreaAddrEntry

1.3.6.1.4.1.33.26.1.2.1

not-accessible

Each entry contains one area address manually configured on this system

INT xIsisManAreaAddrSysInstance

1.3.6.1.4.1.33.26.1.2.1.1

INTEGER

read-only

The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.

OCT xIsisManAreaAddr

1.3.6.1.4.1.33.26.1.2.1.2

OCTET STRING

read-only

A manually configured area address for this system. This object follows the index behaviour.

INT xIsisManAreaAddrExistState

1.3.6.1.4.1.33.26.1.2.1.3

INTEGER

read-write

The state of the xIsisManAreaAddrEntry. This object follows the ExistenceState behaviour. If an attempt is made to set this object to the value off when the corresponding xIsisManAreaAddrEntry is the only valid entry for this instance and when the corresponding ISIS instance has xIsisSysOperState set to On then the attempt is rejected.

xIsisAreaAddrTable

1.3.6.1.4.1.33.26.1.3

not-accessible

The union of the sets of area addresses reported in all Level 1 LSPs received by this instance of the protocol.

xIsisAreaAddrEntry

1.3.6.1.4.1.33.26.1.3.1

not-accessible

Each entry contains one area address reported in a Level 1 LSP received by this instance of the protocol.

INT xIsisAreaAddrSysInstance

1.3.6.1.4.1.33.26.1.3.1.1

INTEGER

read-only

The unique identifier of the Integrated IS-IS instance to which this row corresponds.

OCT xIsisAreaAddr

1.3.6.1.4.1.33.26.1.3.1.2

OCTET STRING

read-only

An area address reported in a Level 1 LSP received by this instance of the protocol.

xIsisSysProtSuppTable

1.3.6.1.4.1.33.26.1.4

not-accessible

This table contains the manually configured set of protocols supported by each instance of the Integrated ISIS protocol.

xIsisSysProtSuppEntry

1.3.6.1.4.1.33.26.1.4.1

not-accessible

Each entry contains one protocol supported by an instance of the Integrated ISIS protocol.

INT xIsisSysProtSuppSysInstance

1.3.6.1.4.1.33.26.1.4.1.1

INTEGER

read-only

The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.

SUP xIsisSysProtSuppProtocol

1.3.6.1.4.1.33.26.1.4.1.2

SupportedProtocol

read-only

One supported protocol. This object follows the index behaviour.

EXI xIsisSysProtSuppExistState

1.3.6.1.4.1.33.26.1.4.1.3

ExistState

read-write

The state of the xIsisSysProtSuppEntry. This object follows the ExistenceState and ReplaceOnlyWhileInstanceDisabled behaviours.

xIsisCirc

1.3.6.1.4.1.33.26.2

xIsisCircTable

1.3.6.1.4.1.33.26.2.1

not-accessible

The table of circuits used by each instance of Integrated IS-IS on this system.

xIsisCircEntry

1.3.6.1.4.1.33.26.2.1.1

not-accessible

An xIsisCircEntry exists for each circuit used by Integrated IS-IS on this system.

INT xIsisCircSysInstance

1.3.6.1.4.1.33.26.2.1.1.1

INTEGER

read-only

The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.

INT xIsisCircIndex

1.3.6.1.4.1.33.26.2.1.1.2

INTEGER

read-only

The identifier of this circuit, unique within the instance of the protocol. This object follows the index behaviour.

INT xIsisCircIfIndex

1.3.6.1.4.1.33.26.2.1.1.3

INTEGER

read-only

The value of ifIndex for the interface to which this circuit corresponds. This object follows the replaceOnlyWhileDisabled behaviour.

INT xIsisCircOperState

1.3.6.1.4.1.33.26.2.1.1.4

INTEGER

read-write

The operational state of the circuit. This object follows the operationalState behaviour.

INT xIsisCircExistState

1.3.6.1.4.1.33.26.2.1.1.5

INTEGER

read-only

The existence state of this circuit. This object follows the ExistenceState behaviour.

INT xIsisCircType

1.3.6.1.4.1.33.26.2.1.1.6

INTEGER

read-write

The type of the circuit. This object follows the replaceOnlyWhileDisabled behaviour. The type specified must be compatible with the type of the interface defined by the value of xIsisCircIfIndex.

INT xIsisCircHelloTimer

1.3.6.1.4.1.33.26.2.1.1.7

INTEGER

read-write

The period, in seconds, between IIH PDUs. It is also used as the period between ISH PDUs when polling the ES configuration. This object follows the resettingTimer behaviour.

INT xIsisCircL1DefaultMetric

1.3.6.1.4.1.33.26.2.1.1.8

INTEGER

read-write

The default metric value of this circuit for Level 1 traffic. 0 means the IS will automatically generate Level 1 default metric for the circuit.

INT xIsisCircL1DelayMetric

1.3.6.1.4.1.33.26.2.1.1.9

INTEGER

read-write

The delay metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported.

INT xIsisCircL1ExpenseMetric

1.3.6.1.4.1.33.26.2.1.1.10

INTEGER

read-write

The expense metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported.

INT xIsisCircL1ErrorMetric

1.3.6.1.4.1.33.26.2.1.1.11

INTEGER

read-write

The error metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported.

INT xIsisCircExtDomain

1.3.6.1.4.1.33.26.2.1.1.12

INTEGER

read-write

If true, suppress normal transmission of and interpretation of Intra-domain ISIS PDUs on this circuit.

CTR xIsisCircAdjChanges

1.3.6.1.4.1.33.26.2.1.1.13

Counter

read-only

The number of times an adjacency state change has occurred on this circuit.

CTR xIsisCircInitFails

1.3.6.1.4.1.33.26.2.1.1.14

Counter

read-only

The number of times initialization of this circuit has failed.

CTR xIsisCircRejAdjs

1.3.6.1.4.1.33.26.2.1.1.15

Counter

read-only

The number of times an adjacency has been rejected on this circuit.

CTR xIsisCircOutCtrlPDUs

1.3.6.1.4.1.33.26.2.1.1.16

Counter

read-only

The number of IS-IS control PDUs sent on this circuit.

CTR xIsisCircInCtrlPDUs

1.3.6.1.4.1.33.26.2.1.1.17

Counter

read-only

The number of IS-IS control PDUs received on this circuit.

CTR xIsisCircIDFieldLenMismatches

1.3.6.1.4.1.33.26.2.1.1.18

Counter

read-only

The number of times an IS-IS control PDU with an ID field length different to that for this system has been received.

INT xIsisCircL2DefaultMetric

1.3.6.1.4.1.33.26.2.1.1.20

INTEGER

read-write

The default metric value of this circuit for level 2 traffic. 0 means the IS will automatically generate the Level 2 default metric for this circuit.

INT xIsisCircL2DelayMetric

1.3.6.1.4.1.33.26.2.1.1.21

INTEGER

read-write

The delay metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported.

INT xIsisCircL2ExpenseMetric

1.3.6.1.4.1.33.26.2.1.1.22

INTEGER

read-write

The expense metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported.

INT xIsisCircL2ErrorMetric

1.3.6.1.4.1.33.26.2.1.1.23

INTEGER

read-write

The error metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported.

INT xIsisCircManL2Only

1.3.6.1.4.1.33.26.2.1.1.24

INTEGER

read-write

When true, indicates that this circuit is to be used only for level 2. This object follows the replaceOnlyWhileDisabled behaviour.

INT xIsisCircL1ISPriority

1.3.6.1.4.1.33.26.2.1.1.25

INTEGER

read-write

The priority for becoming LAN Level 1 Deignated Intermediate System on a broadcast circuit.

OCT xIsisCircL1CircID

1.3.6.1.4.1.33.26.2.1.1.26

OCTET STRING

read-only

The LAN ID allocated by the LAN Level 1 Designated Intermediate System. Where this system is not aware of the value (because it is not participating in the Level 1 Designated Intermediate System election), this object has the value which would be proposed for this circuit (i.e. the concatenation of the local system ID and the one octet local Circuit ID for this circuit.

OCT xIsisCircL1DesIS

1.3.6.1.4.1.33.26.2.1.1.27

OCTET STRING

read-only

The ID of the LAN Level 1 Designated Intermediate System on this circuit. If, for any reason this system is not partaking in the relevant Designated Intermediate System election process, then the value returned is the zero length OCTET STRING.

CTR xIsisCircLANL1DesISChanges

1.3.6.1.4.1.33.26.2.1.1.28

Counter

read-only

The number of times the LAN Level 1 Designated Intermediate System has changed.

INT xIsisCircL2ISPriority

1.3.6.1.4.1.33.26.2.1.1.29

INTEGER

read-write

The priority for becoming LAN level 2 Designated Intermediate System.

OCT xIsisCircL2CircID

1.3.6.1.4.1.33.26.2.1.1.30

OCTET STRING

read-only

The LAN ID allocated by the LAN Level 2 Designated Intermediate System. Where this system is not aware of this value (because it is not participating in the Level 2 Designated Intermediate System election), this object has the value which would be proposed for this circuit (i.e. the concatenation of the local system ID and the one octet local Circuit ID for this circuit.

OCT xIsisCircL2DesIS

1.3.6.1.4.1.33.26.2.1.1.31

OCTET STRING

read-only

The ID of the LAN Level 2 Designated Intermediate System on this circuit. If, for any reason, this system is not partaking in the relevant Designated Intermediate System election process, then the value returned is the zero length OCTET STRING.

CTR xIsisCircLANL2DesISChanges

1.3.6.1.4.1.33.26.2.1.1.32

Counter

read-only

The number of times the LAN Level 2 Designated Intermediate System has changed.

xIsisCircISTable

1.3.6.1.4.1.33.26.2.2

not-accessible

The set of objects controlling the operation of the IS functions of the ES-IS protocol (ISO 9542) on each circuit over which ISIS is run.

xIsisCircISEntry

1.3.6.1.4.1.33.26.2.2.1

not-accessible

Each entry contains objects controlling the operation of the IS functions of the ES-IS protocol (ISO 9542) on one circuit.

INT xIsisCircISSysInstance

1.3.6.1.4.1.33.26.2.2.1.1

INTEGER

read-only

The identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index and manualOrAutomatic behaviours.

INT xIsisCircISIndex

1.3.6.1.4.1.33.26.2.2.1.2

INTEGER

read-only

The unique identifier of this row. This value is the same as the value of the ifIndex object which identifies the interface which corresponds to this circuit. This object follows the index behaviour.

INT xIsisCircISExistState

1.3.6.1.4.1.33.26.2.2.1.3

INTEGER

read-only

The existence state of this row. This object follows the ExistenceState behaviour.

INT xIsisCircISOperState

1.3.6.1.4.1.33.26.2.2.1.4

INTEGER

read-write

The operational state of the row. This object follows the operationalState behaviour.

INT xIsisCircISHoldTimerMult

1.3.6.1.4.1.33.26.2.2.1.5

INTEGER

read-only

The factor to derive holding timer from configuration timer. This value when multipled by a configuration timer yields the value of the holding timer parameter issued with configuration information. The semantics of this parameter are such that it is permissible to add a delta value to the result to compensate for possible delays and imprecision of timers. The result of the calculation is truncated, upon overflow, to the maximum value for the parameter permitted by the protocol (65535).

INT xIsisCircISConfTimer

1.3.6.1.4.1.33.26.2.2.1.6

INTEGER

read-write

Value in seconds for the ISO 9542 IS configuration timer. It is used to determine how often an IS reports configuration information to ESs. This object follows the resettingTimer behaviour.

INT xIsisCircISSuggESConfTimer

1.3.6.1.4.1.33.26.2.2.1.7

INTEGER

read-write

Value to be used for the ISO 9542 suggested ES configuration timer value (in seconds), advertised in IS Hellos generated by the system on this circuit. This object follows the resettingTimer behaviour.

INT xIsisCircISRedHoldTime

1.3.6.1.4.1.33.26.2.2.1.8

INTEGER

read-write

The holding time (in seconds) to be specified in Redirect PDUs generated by the system on this circuit.

CTR xIsisCircISESReachChgs

1.3.6.1.4.1.33.26.2.2.1.9

Counter

read-only

Count of the number of changes in reachability of End Systems from this circuit.

CTR xIsisCircISInv9542PDUs

1.3.6.1.4.1.33.26.2.2.1.10

Counter

read-only

Counter of invalid 9542 PDUs received. This is the number of ISO 9452 PDUs received which are discarded as a result of the PDU Header Error Detection or Protocol Error Processing Functions specified in ISO 9542.

xIsisCircClnsTable

1.3.6.1.4.1.33.26.2.3

not-accessible

The set of objects controlling the operation of the CLNS protocol (ISO 8473) on each circuit over which ISIS is run.

xIsisCircClnsEntry

1.3.6.1.4.1.33.26.2.3.1

not-accessible

Each entry contains objects controlling the operation of the CLNS protocol (ISO 8473) on one circuit.

INT xIsisCircClnsSysInstance

1.3.6.1.4.1.33.26.2.3.1.1

INTEGER

read-only

The identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index and manualOrAutomatic behaviours.

INT xIsisCircClnsIndex

1.3.6.1.4.1.33.26.2.3.1.2

INTEGER

read-only

The unique identifier of this row. This value is the same as the value of the ifIndex object which identifies the interface which corresponds to this circuit. This object follows the index behaviour.

INT xIsisCircClnsExistState

1.3.6.1.4.1.33.26.2.3.1.3

INTEGER

read-only

The existence state of this row. This object follows the ExistenceState behaviour.

INT xIsisCircClnsOperState

1.3.6.1.4.1.33.26.2.3.1.4

INTEGER

read-write

The operational state of the row. This object follows the operationalState behaviour.

CTR xIsisCircClnsRxPDUs

1.3.6.1.4.1.33.26.2.3.1.5

Counter

read-only

Counter of number of CLNS PDUs received on this circuit.

CTR xIsisCircClnsTxPDUs

1.3.6.1.4.1.33.26.2.3.1.6

Counter

read-only

Counter of number of CLNS PDUs transmitted on this circuit.

xIsisISAdj

1.3.6.1.4.1.33.26.3

xIsisISAdjTable

1.3.6.1.4.1.33.26.3.1

not-accessible

The table of adjacencies to Intermediate Systems.

xIsisISAdjEntry

1.3.6.1.4.1.33.26.3.1.1

not-accessible

Each entry corresponds to one adjacency to an Intermediate System on this system.

INT xIsisISAdjSysInstance

1.3.6.1.4.1.33.26.3.1.1.1

INTEGER

read-only

The unique identifier of the Integrated IS-IS instance to which this row corresponds.

INT xIsisISAdjCircIndex

1.3.6.1.4.1.33.26.3.1.1.2

INTEGER

read-only

The identifier of the Circuit which is the parent of the IS adjacency.

INT xIsisISAdjIndex

1.3.6.1.4.1.33.26.3.1.1.3

INTEGER

read-only

A unique value identifying the IS adjacency from all other such adjacencies on this circuit. This value is assigned by the system when the adjacency is created automatically.

INT xIsisISAdjState

1.3.6.1.4.1.33.26.3.1.1.4

INTEGER

read-only

The state of the adjacency

OCT xIsisISAdjNeighSNPAAddress

1.3.6.1.4.1.33.26.3.1.1.5

OCTET STRING

read-only

The SNPA address of the neighboring system.

INT xIsisISAdjNeighSysType

1.3.6.1.4.1.33.26.3.1.1.6

INTEGER

read-only

The type of the neighboring system.

OCT xIsisISAdjNeighSysID

1.3.6.1.4.1.33.26.3.1.1.7

OCTET STRING

read-only

The system ID of the neighboring Intermediate System set from the source ID field of the neighbor's IIH PDUs.

INT xIsisISAdjUsage

1.3.6.1.4.1.33.26.3.1.1.8

INTEGER

read-only

The usage of the adjacency. An adjacency of type level1 will be used for level 1 traffic only. An adjacency of type level2 will be used for level 2 traffic only. An adjacency of type level1and2 will be used for both level 1 and level 2 traffic. There may be two adjacencies (of types level1 and level2) between the same pair of Intermediate Systems.

INT xIsisISAdjHoldTimer

1.3.6.1.4.1.33.26.3.1.1.9

INTEGER

read-only

The holding time for this adjacency updated from received IIH PDUs.

INT xIsisISAdjNeighPriority

1.3.6.1.4.1.33.26.3.1.1.10

INTEGER

read-only

Priority of the neighboring Intermediate System for becoming the LAN Level 1 Designated Intermediate System if the value of xIsisISAdjNeighSysType is L1IntermediateSystem or LAN Level 2 Designated Intermediate System if the value of xIsisISAdjNeighSysType is L2IntermediateSystem.

xIsisISAdjAreaAddrTable

1.3.6.1.4.1.33.26.3.2

not-accessible

This table contains the set of Area Addresses of neighboring Intermediate Systems as reported in received IIH PDUs.

xIsisISAdjAreaAddrEntry

1.3.6.1.4.1.33.26.3.2.1

not-accessible

Each entry contains one Area Address reported by a neighboring Intermediate System in its IIH PDUs.

INT xIsisISAdjAreaAddrSysInstance

1.3.6.1.4.1.33.26.3.2.1.1

INTEGER

read-only

The unique identifier of the Integrated IS-IS instance to which this row corresponds.

INT xIsisISAdjAreaAddrCircIndex

1.3.6.1.4.1.33.26.3.2.1.2

INTEGER

read-only

The identifier of the Circuit which is the parent of the IS adjacency to which this Area Address entry corresponds.

INT xIsisISAdjAreaAddrAdjIndex

1.3.6.1.4.1.33.26.3.2.1.3

INTEGER

read-only

The identifier of the IS adjacency to which this entry belongs.

OCT xIsisISAdjAreaAddress

1.3.6.1.4.1.33.26.3.2.1.4

OCTET STRING

read-only

One Area Address as reported in IIH PDUs received from the neighbor.

xIsisISAdjIPAddrTable

1.3.6.1.4.1.33.26.3.3

not-accessible

This table contains the set of IP Addresses of neighboring Intermediate Systems as reported in received IIH PDUs.

xIsisISAdjIPAddrEntry

1.3.6.1.4.1.33.26.3.3.1

not-accessible

Each entry contains one IP Address reported by a neighboring Intermediate System in its IIH PDUs.

INT xIsisISAdjIPAddrSysInstance

1.3.6.1.4.1.33.26.3.3.1.1

INTEGER

read-only

The unique identifier of the Integrated IS-IS instance to which this row corresponds.

INT xIsisISAdjIPAddrCircIndex

1.3.6.1.4.1.33.26.3.3.1.2

INTEGER

read-only

The identifier of the Circuit which is the parent of the IS adjacency to which this IP Address entry corresponds.

INT xIsisISAdjIPAddrAdjIndex

1.3.6.1.4.1.33.26.3.3.1.3

INTEGER

read-only

The identifier of the IS adjacency to which this entry belongs.

IP xIsisISAdjIPAddress

1.3.6.1.4.1.33.26.3.3.1.4

IpAddress

read-only

One IP Address as reported in IIH PDUs received from the neighbor.

xIsisISAdjProtSuppTable

1.3.6.1.4.1.33.26.3.4

not-accessible

This table contains the set of protocols supported by neighboring Intermediate Systems as reported in received IIH PDUs.

xIsisISAdjProtSuppEntry

1.3.6.1.4.1.33.26.3.4.1

not-accessible

Each entry contains one protocol supported by a neighboring Intermediate System as reported in its IIH PDUs.

INT xIsisISAdjProtSuppSysInstance

1.3.6.1.4.1.33.26.3.4.1.1

INTEGER

read-only

The unique identifier of the Integrated IS-IS instance to which this row corresponds.

INT xIsisISAdjProtSuppCircIndex

1.3.6.1.4.1.33.26.3.4.1.2

INTEGER

read-only

The identifier of the Circuit which is the parent of the IS adjacency to which this supported protocol entry corresponds.

INT xIsisISAdjProtSuppAdjIndex

1.3.6.1.4.1.33.26.3.4.1.3

INTEGER

read-only

The identifier the IS adjacency to which this entry corresponds.

SUP xIsisISAdjProtSuppProtocol

1.3.6.1.4.1.33.26.3.4.1.4

SupportedProtocol

read-only

One supported protocol as reported in IIH PDUs received from the neighbor.

xIsisESAdj

1.3.6.1.4.1.33.26.4

xIsisESAdjTable

1.3.6.1.4.1.33.26.4.1

not-accessible

The table of End System IDs of neighboring End Systems as reported in their ESH PDUs or as configured manually

xIsisESAdjEntry

1.3.6.1.4.1.33.26.4.1.1

not-accessible

Each entry contains one End System ID of a neighboring End System as reported in an ESH PDU or as configured manually.

INT xIsisESAdjSysInstance

1.3.6.1.4.1.33.26.4.1.1.1

INTEGER

read-only

The identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index and manualOrAutomatic behaviours.

INT xIsisESAdjCircIndex

1.3.6.1.4.1.33.26.4.1.1.2

INTEGER

read-only

The identifier of the Circuit which is the parent of the ES adjacency to which this End System ID entry corresponds. This object follows the index and manualOrAutomatic behaviours.

INT xIsisESAdjIndex

1.3.6.1.4.1.33.26.4.1.1.3

INTEGER

read-only

The identifier of the ES adjacency to which this entry belongs. This object follows the index and manualOrAutomatic behaviours.

INT xIsisESAdjType

1.3.6.1.4.1.33.26.4.1.1.4

INTEGER

read-only

The indication of whether this adjacency was created manually by management action or automatically by the implementation.

INT xIsisESAdjState

1.3.6.1.4.1.33.26.4.1.1.5

INTEGER

read-write

The state of the adjacency. Adjacencies created manually always have this value set to up.

OCT xIsisESAdjNeighSNPAAddress

1.3.6.1.4.1.33.26.4.1.1.6

OCTET STRING

read-write

The SNPA address of the neighboring system. This object follows the manualOrAutomatic behaviour.

INT xIsisESAdjExistState

1.3.6.1.4.1.33.26.4.1.1.7

INTEGER

read-write

The existence state of this ES Adjacency. This object follows the ExistenceState behaviour. This object follows the manualOrAutomatic behaviour.

OCT xIsisESAdjESID

1.3.6.1.4.1.33.26.4.1.1.8

OCTET STRING

read-only

An End System ID of a neighboring End System. This object follows the index and manualOrAutomatic behaviour.

xIsisReachAddr

1.3.6.1.4.1.33.26.5

xIsisRATable

1.3.6.1.4.1.33.26.5.1

not-accessible

The table of Reachable Addresses to NSAPs or Address Prefixes.

xIsisRAEntry

1.3.6.1.4.1.33.26.5.1.1

not-accessible

Each entry defines a Reachable Address to a NSAP or Address Prefix.

INT xIsisRASysInstance

1.3.6.1.4.1.33.26.5.1.1.1

INTEGER

read-only

The identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index and manualOrAutomatic behaviours.

INT xIsisRACircIndex

1.3.6.1.4.1.33.26.5.1.1.2

INTEGER

read-only

The identifier of the Circuit over which this destination is reachable. This object follows the index and manualOrAutomatic behaviours.

INT xIsisRAIndex

1.3.6.1.4.1.33.26.5.1.1.3

INTEGER

read-only

The identifier for this xIsisRAEntry. This value must be unique amongst all Reachable Addresses on the same parent Circuit. This object follows the index and manualOrAutomatic behaviours.

INT xIsisRAExistState

1.3.6.1.4.1.33.26.5.1.1.4

INTEGER

read-write

The existence state of this Reachable Address. This object follows the ExistenceState and manualOrAutomatic behaviours.

INT xIsisRAOperState

1.3.6.1.4.1.33.26.5.1.1.5

INTEGER

read-write

The operational state of the Reachable Address. This object follows the operationalState and manualOrAutomatic behaviours.

OCT xIsisRAAddrPrefix

1.3.6.1.4.1.33.26.5.1.1.6

OCTET STRING

read-write

The destination of this Reachable Address. This is an Address Prefix. This object follows the replaceOnlyWhileDisabled and manualOrAutomatic behaviours.

INT xIsisRAMapType

1.3.6.1.4.1.33.26.5.1.1.7

INTEGER

read-write

The type of mapping to be employed to ascertain the SNPA Address which should be used in forwarding PDUs for this Reachable Address prefix. This object follows the manualOrAutomatic behaviour. The following values of mapping type are defined: none: The mapping is null because the neighbor SNPA is implicit by nature of the subnetwork (e.g. a point-to-point linkage). explicit: The subnetwork addresses in the object xIsisRASNPAAddress is to be used. extractIDI: The SNPA is embedded in the IDI of the destination NSAP Address. The mapping algorithm extracts the SNPA to be used according to the format and encoding rules of ISO8473/Add2. This SNPA extraction algorithm can be used in conjunction with Reachable Address prefixes from the X.121, F.69, E.163 and E.164 addressing subdomains. extractDSP: All, or a suffix, of the SNPA is embedded in the DSP of the destination address. This SNPA extraction algorithm extracts the embedded subnetwork addressing information by performing a logical AND of the xIsisRASNPAMask object value with the destination address. The part of the SNPA extracted from the destination NSAP is appended to the xIsisRASNPAPrefix object value to form the next hop subnetwork addressing information.

INT xIsisRADefMetric

1.3.6.1.4.1.33.26.5.1.1.8

INTEGER

read-write

The default metric value for reaching the specified prefix over this circuit. This object follows the manualOrAutomatic behaviour.

INT xIsisRADelMetric

1.3.6.1.4.1.33.26.5.1.1.9

INTEGER

read-write

The delay metric for reaching the specified prefix over this circuit. This object follows the manualOrAutomatic behaviour. The value zero is reserved to indicate that this metric is not supported.

INT xIsisRAExpMetric

1.3.6.1.4.1.33.26.5.1.1.10

INTEGER

read-write

The expense metric for reaching the specified prefix over this circuit. This object follows the manualOrAutomatic behaviour. The value zero is reserved to indicate that this metric is not supported.

INT xIsisRAErrMetric

1.3.6.1.4.1.33.26.5.1.1.11

INTEGER

read-write

The error metric for reaching the specified prefix over this circuit. This object follows the manualOrAutomatic behaviour. The value zero is reserved to indicate that this metric is not supported.

INT xIsisRADefMetricType

1.3.6.1.4.1.33.26.5.1.1.12

INTEGER

read-write

Indicates whether the default metric is internal or external. This object follows the manualOrAutomatic behaviour.

INT xIsisRADelMetricType

1.3.6.1.4.1.33.26.5.1.1.13

INTEGER

read-write

Indicates whether the delay metric is internal or external. This object follows the manualOrAutomatic behaviour.

INT xIsisRAExpMetricType

1.3.6.1.4.1.33.26.5.1.1.14

INTEGER

read-write

Indicates whether the expense metric is internal or external. This object follows the manualOrAutomatic behaviour.

INT xIsisRAErrMetricType

1.3.6.1.4.1.33.26.5.1.1.15

INTEGER

read-write

Indicates whether the error metric is internal or external. This object follows the manualOrAutomatic behaviour.

OCT xIsisRASNPAAddress

1.3.6.1.4.1.33.26.5.1.1.16

OCTET STRING

read-write

The SNPA Address to which a PDU may be forwarded in order to reach a destination which matches the address prefix of the Reachable Address. This object follows the manualOrAutomatic behaviour.

OCT xIsisRASNPAMask

1.3.6.1.4.1.33.26.5.1.1.17

OCTET STRING

read-write

A bit mask with 1 bits indicating the positions in the effective destination address from which embedded SNPA information is to be extracted. For the extraction the first octet of the xIsisRASNPAMask object value is aligned with the first octet (AFI) of the NSAP Address. If the xIsisRASNPAMask object value and NSAP Address are of different lengths, the shorter of the two is logically padded with zeros before performing the extraction. This object follows the manualOrAutomatic behaviour.

OCT xIsisRASNPAPrefix

1.3.6.1.4.1.33.26.5.1.1.18

OCTET STRING

read-write

A fixed SNPA prefix for use when the xIsisRAMapType is extractDSP. The SNPA Address to use is formed by concatenating the fixed SNPA prefix with a variable SNPA part that is extracted from the effective destination address. For Reachable Address prefixes in which the entire SNPA is embedded in the DSP the SNPA Prefix shall be null. This object follows the manualOrAutomatic behaviour.

INT xIsisRAType

1.3.6.1.4.1.33.26.5.1.1.20

INTEGER

read-only

The type of Reachable address. Those of type manual are created by the network manager. Those of type automatic are created through propogation of routing information from another routing protocol (eg. IDRP).

xIsisCLNPDest

1.3.6.1.4.1.33.26.7

xIsisL1CLNPDestTable

1.3.6.1.4.1.33.26.7.1

not-accessible

The Level 1 CLNP Destination Table records information about each end system ID destination known to the Intermediate System.

xIsisL1CLNPDestEntry

1.3.6.1.4.1.33.26.7.1.1

not-accessible

Each entry records information about one CLNP end system ID destination known to the Intermediate System.

INT xIsisL1CLNPSysInstance

1.3.6.1.4.1.33.26.7.1.1.1

INTEGER

read-only

If the value of xIsisL1CLNPRouteSource is manual or level1 then this is the identifier of the Integrated IS-IS Level 1 instance from which this reachability information was learned, otherwise this value is zero.

OCT xIsisL1CLNPRouteDest

1.3.6.1.4.1.33.26.7.1.1.2

OCTET STRING

read-only

The destination end system ID.

INT xIsisL1CLNPRouteMetricQOS

1.3.6.1.4.1.33.26.7.1.1.3

INTEGER

read-only

The QOS metric for this destination.

INT xIsisL1CLNPRouteMetricType

1.3.6.1.4.1.33.26.7.1.1.4

INTEGER

read-only

Indicates whether the metric has an external component or not

INT xIsisL1CLNPRouteMetricValue

1.3.6.1.4.1.33.26.7.1.1.5

INTEGER

read-only

The path metric value for this destination.

OID xIsisL1CLNPRouteForw

1.3.6.1.4.1.33.26.7.1.1.6

OBJECT IDENTIFIER

read-only

The OBJECT IDENTIFIER for the first object in the table entry which corresponds to the entry used for forwarding packets to this destination. This value is an OBJECT IDENTIFIER for an instance of the object: xIsisESAdjSysInstance or xIsisISAdjSysInstance.

INT xIsisL1CLNPRouteSource

1.3.6.1.4.1.33.26.7.1.1.7

INTEGER

read-only

The source of the destination. Manual is used if the source is manually configured information on the system. Level1 is used if the source is Level 1 LSPs. Esis is used if the source is ES Hellos

xIsisL2CLNPDestTable

1.3.6.1.4.1.33.26.7.2

not-accessible

The Level 2 CLNP Destination Table records information about each NSAP Address Prefix known to the Intermediate System.

xIsisL2CLNPDestEntry

1.3.6.1.4.1.33.26.7.2.1

not-accessible

Each entry records information about one NSAP Address Prefix known to the Intermediate System.

INT xIsisL2CLNPSysInstance

1.3.6.1.4.1.33.26.7.2.1.1

INTEGER

read-only

The identifier of the Integrated IS-IS Level 2 instance from which this reachability information was learned.

OCT xIsisL2CLNPRouteDest

1.3.6.1.4.1.33.26.7.2.1.2

OCTET STRING

read-only

The destination address prefix.

INT xIsisL2CLNPRouteMetricQOS

1.3.6.1.4.1.33.26.7.2.1.3

INTEGER

read-only

The QOS metric for this destination.

INT xIsisL2CLNPRouteMetricType

1.3.6.1.4.1.33.26.7.2.1.4

INTEGER

read-only

Indicates whether the metric has an external component or not

INT xIsisL2CLNPRouteMetricValue

1.3.6.1.4.1.33.26.7.2.1.5

INTEGER

read-only

The path metric value for this destination.

OID xIsisL2CLNPRouteForw

1.3.6.1.4.1.33.26.7.2.1.6

OBJECT IDENTIFIER

read-only

The OBJECT IDENTIFIER for the first object in the table entry which corresponds to the entry used for forwarding packets to this destination. This value is an OBJECT IDENTIFIER for an instance of one of the following objects: isisVirtSysInstance, xIsisISAdjSysInstance, xIsisRASysInstance.

INT xIsisL2CLNPRouteSource

1.3.6.1.4.1.33.26.7.2.1.7

INTEGER

read-only

The source of the destination. Manual is used if the source is manually configured information on the system. Level2 is used if the source is Level 2 LSPs.

xIsisL3CLNPDestTable

1.3.6.1.4.1.33.26.7.3

not-accessible

The Level 3 CLNP Destination Table records information about each Reachable Address Prefix known to the Intermediate System.

xIsisL3CLNPDestEntry

1.3.6.1.4.1.33.26.7.3.1

not-accessible

Each entry records information about one Address Prefix known to the Intermediate System.

INT xIsisL3CLNPSysInstance

1.3.6.1.4.1.33.26.7.3.1.1

INTEGER

read-only

The identifier of the Integrated IS-IS Level 3 instance from which this reachability information was learned.

OCT xIsisL3CLNPRouteDest

1.3.6.1.4.1.33.26.7.3.1.2

OCTET STRING

read-only

The destination address prefix.

INT xIsisL3CLNPRouteMetricQOS

1.3.6.1.4.1.33.26.7.3.1.3

INTEGER

read-only

The QOS metric for this destination.

INT xIsisL3CLNPRouteMetricType

1.3.6.1.4.1.33.26.7.3.1.4

INTEGER

read-only

Indicates whether the metric has an external component or not

INT xIsisL3CLNPRouteMetricValue

1.3.6.1.4.1.33.26.7.3.1.5

INTEGER

read-only

The path metric value for this destination.

OID xIsisL3CLNPRouteForw

1.3.6.1.4.1.33.26.7.3.1.6

OBJECT IDENTIFIER

read-only

The OBJECT IDENTIFIER for the first object in the table entry which corresponds to the entry used for forwarding packets to this destination. This value is an OBJECT IDENTIFIER for an instance of one of the following objects: isisVirtSysInstance, xIsisISAdjSysInstance, xIsisRASysInstance.

INT xIsisL3CLNPRouteSource

1.3.6.1.4.1.33.26.7.3.1.7

INTEGER

read-only

The source of the destination. Manual is used if the source is manually configured information on the system. Level3 is used if the source is Level 3 LSPs.

xRmon

1.3.6.1.4.1.33.31

NTF iTouchAlarm

1.3.6.1.4.1.33.31.0.1

The SNMP trap that is generated when xRmonTrapType is set to iTouchFormat(2). These traps, like the RMON standardFormat(1) traps, occur when an alarm variable crosses its rising or falling threshold and generates an event configured to send SNMP traps. The format of the DisplayString embodied by the trap PDU is identical to that of mbLogDescription. The actual object identifier is not significant.

xRmonMonitor

1.3.6.1.4.1.33.31.1

INT xRmonMonitorRemote

1.3.6.1.4.1.33.31.1.1

INTEGER

read-only

Once an alarm is 'completed', monitoring for that variable may be distributed within an enclosure to another processor. Factors affecting this decision include variable type, slot number, and processor type. Furthermore, alarms which have identical parameters (variable, interval, thresholds, etc.) are viewed by the monitoring processor as a single 'object' to monitor. Alarm variables falling into this category are a subset of the repeater MIB and iTouch repeater MIB objects. This field represents the number of 'objects' this system CPU is monitoring on behalf of alarms which were distributed to it by a management processor.

INT xRmonMonitorLocal

1.3.6.1.4.1.33.31.1.2

INTEGER

read-only

Once an alarm is 'completed', monitoring for that variable may be distributed within an enclosure to another processor. Factors affecting this decision include variable type, slot number, and processor type. Furthermore, alarms which have identical parameters (variable, interval, thresholds, etc.) are viewed by the monitoring processor as a single 'object' to monitor. Alarm variables falling into this category are a subset of the repeater MIB and iTouch repeater MIB objects. This field represents the number of 'objects' this system CPU is monitoring, objects it did not distribute to another processor.

INT xRmonLogClear

1.3.6.1.4.1.33.31.1.3

INTEGER

read-write

Set this field to 'execute' to delete all RMON log table entries. Setting to 'ready' has no effect.

CTR xRmonLogTotal

1.3.6.1.4.1.33.31.1.4

Counter

read-only

This field reports the total number of RMON log entries created since the system was initialized. Clearing the log table does not change this value.

DAT xRmonLogLastDateTime

1.3.6.1.4.1.33.31.1.5

DateTime

read-only

The local date and time of the system at the time an RMON log entry was last created.

INT xRmonTrapType

1.3.6.1.4.1.33.31.1.6

INTEGER

read-write

Use this field to specify the type of SNMP trap to generate when an alarm event occurs. The value 'standardFormat' formats the trap as a standard, RMON-compliant rising and falling event trap. The value 'iTouchFormat' formats the trap as a DisplayString containing a human-readable summary of the event. The text of the string is very similar to that of the log descriptions.

INT xRmonRepeaterManagement

1.3.6.1.4.1.33.31.1.7

INTEGER

read-write

This field enables and disables RMON monitoring of certain repeater related variables in the chassis. Set this field to 'enabled' to allow this slot to activate alarms and report traps for variables from the standard repeater MIB (snmpDot3RptrMgt 1.3.6.1.2.1.22) and the iTouch repeater MIB (xRepeater 1.3.6.1.4.1.33.17). When you set this field to 'disabled', alarms may still be created for these repeater variables, but no monitoring will take place for them. The alarm state will be 'held' during this time. Only one slot in a chassis may have this field set to 'enabled' at any given time. Setting 'enabled' in any one slot automatically sets it to 'disabled' in every other slot. Repeater variable monitoring in those slots will cease and the corresponding alarm states will be 'held'.

INT xRmonAlarmActivate

1.3.6.1.4.1.33.31.1.8

INTEGER

read-write

Use this field to change the states of all completed alarms to 'active' or 'inactive'. Select 'activateAll' to make all completed alarms not in the 'active' state become 'active' again. This is useful for alarms whose error states are not automatically cleared by the system. Alarms whose error conditions have not cleared will remain in their current states. Select 'deactivateAll' to make all completed alarms that are in the 'active' state become 'inactive'. This is a convenient way to suppress alarm activity while making other configuration changes without actually deleting the alarms. Alarms which are incomplete (e.g., 'creating' state) are not affected by these actions. If you want to alter the state of a single alarm, modify the table entry for that alarm. Selecting noAction has no effect.

INT xRmonAlarmClear

1.3.6.1.4.1.33.31.1.9

INTEGER

read-write

Set this field to 'deleteAll' to delete all alarm table entries and their associated event entries. Setting to 'noAction' has no effect.

xRmonAlarmCount

1.3.6.1.4.1.33.31.1.10

INT xRmonAlarmsIncomplete

1.3.6.1.4.1.33.31.1.10.1

INTEGER

read-only

This value represents the number of alarms that are not completed. Completing these alarms will make them active.

INT xRmonAlarmsActive

1.3.6.1.4.1.33.31.1.10.2

INTEGER

read-only

This value represents the number of alarms whose state is 'active'. These are completed alarms which are actively monitored.

INT xRmonAlarmsHeld

1.3.6.1.4.1.33.31.1.10.3

INTEGER

read-only

This value represents the number of alarms whose state is 'held'. These are completed alarms which will not be actively monitored because the Repeater Management feature for this processor is currently disabled. Enabling the feature will activate all alarms in this state.

INT xRmonAlarmsOther

1.3.6.1.4.1.33.31.1.10.4

INTEGER

read-only

This value represents the number of completed alarms that are not 'active' and not 'held'. Monitoring is not active for these alarms.

INT xRmonAlarmInitAction

1.3.6.1.4.1.33.31.1.11

INTEGER

read-write

Use this field to specify whether all alarms read from the parameter file should be placed in the 'active' state or the 'inactive' state upon system initialization. Selecting 'activateUponInit' (the default) will activate all alarms read from the parameter file when the system initializes. Selecting 'inactiveUponInit' will place all alarms in the 'inactive' state when the system initializes. Modifying this value does not affect the present state of any alarm.

xRmonMB

1.3.6.1.4.1.33.31.2

xRmonMBConfig

1.3.6.1.4.1.33.31.2.1

INT mbAlarmIndex

1.3.6.1.4.1.33.31.2.1.1

INTEGER

read-write

This field can be either the index of an existing alarm (as seen in the alarm summary view) or a new number to create a new alarm. Specify the index of an existing alarm to fill the remaining fields with the corresponding settings from that alarm. To modify the settings of a completed alarm, set its status to underCreation. Specify an index which does not exist to create a new alarm. The initial settings of the remaining fields are taken from the alarm you were previously viewing, if any. This makes it easier to 'copy' an alarm definition when you want to change only a few of the settings, such as the alarm variable or keys. Specify a value of 0 to clear the remaining fields.

INT mbAlarmInterval

1.3.6.1.4.1.33.31.2.1.2

INTEGER

read-write

The interval in seconds over which the variable is sampled and compared with the rising and falling thresholds. If the monitored variable exceeds the limit 2^31-1 (4294967295), the alarm value field may roll over to 0 and cause or suppress the generation of an alarm event during that interval. You may not modify this field once the alarm is completed (see alarm status field).

OID mbAlarmVariable

1.3.6.1.4.1.33.31.2.1.3

OBJECT IDENTIFIER

read-write

This value shows the SNMP object identifier of the variable being sampled. Only variables that have an SNMP 'SYNTAX' of INTEGER, Counter, Gauge, or TimeTicks may be sampled. When you specify an object identifier in this field, the quick list, key prompt, and key value fields are filled for you with the appropriate values. If you specify an object not found in the quick list, that field is set to 'unlistedAlarmVariable'. The key values will be set to zero in this case. If you specify an alarm variable and keys using the quick list and key fields, an SNMP object identifier is built for you and placed in this field. You may not modify this field at the same time that you modify the quick list field or either of the key values. You may not modify this field once the alarm is completed (see alarm status field).

INT mbAlarmInterpretation

1.3.6.1.4.1.33.31.2.1.4

INTEGER

read-write

Use this field when you want to select an alarm variable without specifying its entire SNMP object identifier. First, modify this field by selecting a variable from the list. Then, read the key prompt fields. They will direct you to specify key values appropriate to the selected variable. The SNMP object identifier will be built for you when you are done. You may not modify this field at the same time that you modify the object identifier field. You may not modify this field once the alarm is completed (see alarm status field).

STR mbAlarmKey1Meaning

1.3.6.1.4.1.33.31.2.1.5

DisplayString

read-only

This field describes how its adjacent key value field will be interpreted when building a complete SNMP object identifier for the alarm variable. The value of this field changes as you select different items from the quick list or specify different SNMP object identifiers. This object has the value 'not applicable' if its key value is not necessary or the object is unknown.

INT mbAlarmKey1

1.3.6.1.4.1.33.31.2.1.6

INTEGER

read-write

Specify a value here according the the instructions given in its adjacent prompt field. That prompt explains how this field will be used. You may still modify this field even though the prompt field indicates that it is not applicable to the selected variable. It will be ignored. You may not modify this field at the same time that you modify the object identifier field. You may not modify this field once the alarm is completed (see alarm status field).

STR mbAlarmKey2Meaning

1.3.6.1.4.1.33.31.2.1.7

DisplayString

read-only

This field describes how its adjacent key value field will be interpreted when building a complete SNMP object identifier for the alarm variable. The value of this field changes as you select different items from the quick list or specify different SNMP object identifiers. This object has the value 'not applicable' if its key value is not necessary or the object is unknown.

INT mbAlarmKey2

1.3.6.1.4.1.33.31.2.1.8

INTEGER

read-write

Specify a value here according the the instructions given in its adjacent prompt field. That prompt explains how this field will be used. In some cases, the value zero has a special meaning. This often occurs when you are prompted to enter a port number. Zero indicates you want each port in the indicated slot to be monitored by this alarm. Only one alarm will exist, but it will generate an event each time any of the ports meets its criteria. You may still modify this field even though the prompt field indicates that it is not applicable to the selected variable. It will be ignored. You may not modify this field at the same time that you modify the object identifier field. You may not modify this field once the alarm is completed (see alarm status field).

INT mbAlarmSampleType

1.3.6.1.4.1.33.31.2.1.9

INTEGER

read-write

Use this field to select the method of calculating the value to be compared against the thresholds. When you set this to 'absoluteValue', the variable you specified is compared directly with the alarm thresholds at the end of each monitoring interval. When you set this to 'changeInValue', the change in the value of the variable over the interval is compared with the thresholds. This is useful for detecting changes in rates of activity. You may not modify this field once the alarm is completed (see alarm status field).

INT mbAlarmValue

1.3.6.1.4.1.33.31.2.1.10

INTEGER

read-only

This field shows the value of the alarm variable at the end of the most recent monitoring interval. If the alarm sample type is 'changeInValue', it instead shows the change in value over that interval. This field is zero any time the alarm is not active, or when the alarm is a wildcard (that is, a port or repeater number of 0 was specified for key 2 value). The value of this field has meaning after the alarm configuration is complete and monitoring begins.

INT mbAlarmRisingThreshold

1.3.6.1.4.1.33.31.2.1.11

INTEGER

read-write

This is the rising threshold value for the alarm. When the current alarm value, specified by the alarm sample type, is greater than or equal to this threshold, and the value at the previous sampling interval was less than this threshold, a single rising alarm event will be generated. Another rising alarm event will not be generated until the sampled value falls below the falling threshold value. You may not modify this field once the alarm is completed (see alarm status field).

INT mbAlarmFallingThreshold

1.3.6.1.4.1.33.31.2.1.12

INTEGER

read-write

This is the falling threshold value for the alarm. When the current alarm value, specified by the alarm sample type, is less than or equal to this threshold, and the value at the previous sampling interval was greater than this threshold, a single rising alarm event will be generated. Another rising alarm event will not be generated until the sampled value falls below the falling threshold value. You may not modify this field once the alarm is completed (see alarm status field).

INT mbAlarmRisingEventType

1.3.6.1.4.1.33.31.2.1.13

INTEGER

read-write

Use this field to indicate the type of notification to make when the alarm variable exceeds its rising threshold. The default action is to generate both a log entry and a trap. Set this field to noAction to suppress notification of rising threshold events. Set this field to logOnly to generate an RMON alarm log entry. These log entries may be viewed through the RMON alarm log view. Set this field to trapOnly to generate an SNMP trap. Refer to the RMON alarm summary to specify whether traps are generated in standard RMON format or in iTouch format. Choosing logAndTrap invokes both these actions. You may not modify this field once the alarm is completed (see alarm status field).

INT mbAlarmFallingEventType

1.3.6.1.4.1.33.31.2.1.14

INTEGER

read-write

Use this field to indicate the type of notification to make when the alarm variable exceeds its falling threshold. The default action is to generate both a log entry and a trap. Set this field to noAction to suppress notification of falling threshold events. Set this field to logOnly to generate an RMON alarm log entry. These log entries may be viewed through the RMON alarm log view. Set this field to trapOnly to generate an SNMP trap. Refer to the RMON alarm summary to specify whether traps are generated in standard RMON format or in iTouch format. Choosing logAndTrap invokes both these actions. You may not modify this field once the alarm is completed (see alarm status field).

STR mbAlarmSummary

1.3.6.1.4.1.33.31.2.1.15

DisplayString

read-only

As you make changes to the to alarm settings, this field is filled with an easily readable summary of the alarm parameters. This is to make it easy for you to confirm that monitoring will behave as you expected once the alarm status is 'active'.

INT mbAlarmStatus

1.3.6.1.4.1.33.31.2.1.16

INTEGER

read-write

Describes the current operational state of the alarm and allows you to make limited changes in the state of the alarm for purposes of managing its state. You may set this field to one of: underCreation, active, inactive, and delete. All other values report current status. underCreation: Alarm configuration is incomplete. You may modify alarm parameters. No monitoring is taking place for the alarm. An alarm is saved in a parameter file after configuration complete. Select this state before changing a previously completed alarm. active: Alarm configuration is complete and active monitoring of the alarm variable is in progress. Select this state to complete an alarm or to begin active monitioring of the alarm variable. inactive: No monitoring of the alarm variable is actively taking place. Select this state when you want to temporarily suppress monitoring for the alarm. Select 'active' to begin monitoring again. delete: Select this state when you want to delete this alarm and all log entries associated with it. held: Active monitoring of the alarm variable is not taking place because this system does not have RMON Repeater Management set to 'enabled'. Once you do this, alarm monitoring begins automatically. noHubCard: The target slot does not contain a management card or repeater I/O card capable of monitoring. Monitoring will begin automatically once the target slot is loaded with a supported configuration. oldFirmware: The I/O card in the target slot does not contain monitoring firmware. Monitoring will begin automatically once that card has been loaded with current scm firmware. slotTimeout: The target slot did not respond to attempts to activate the alarm. May happen if the management card in the target slot does not contain monitoring software. Monitoring begins automatically once the target slot has been repaired or loaded with current software. slotFailed: Active monitoring of the alarm variable stopped because the target slot was not operating properly. Monitoring automatically resumes once the target slot has recovered. monitorStopped: Active monitoring of the alarm variable stopped due to some error. This can occur if the variable no longer exists because a related configuration change has made it invalid. Correct the condition and re-activate the alarm. unknownVariable: The alarm variable specified by the object ID is not recognized in the currently running system. Correct the entry. keysMissing: One or more required key values are not specified in the alarm variable object ID. Correct the entry. noResources: Not enough system resources exist to activate this alarm. Reduce the use of packet buffers or available memory and re-activate the alarm. loading: The alarm is being read from a parameter file and will soon be activated. This condition is transient. activating: Monitoring of the alarm variable will begin soon. This condition is transient. deactivating: Monitoring of the alarm variable will stop soon. This condition is transient. unsupported: Monitoring for the alarm variable is not supported by the target slot. Monitoring will begin once that card is loaded with current scm firmware or software. unknownAlarm: Monitoring stopped because the target slot reset. Monitoring will continue shortly. inconsistency: Internal system error. invalidFlags: Internal system error. invalidSlot: Alarm specified for a slot which does not exist in the chassis. Modify and re-activate. inaccessible: Monitoring of the alarm variable could not begin. This can occur if the key values are invalid for the variable. Correct and re-activate the alarm. otherError: An unspecified error has occurred.

mbAlarmTable

1.3.6.1.4.1.33.31.2.2

not-accessible

A list of RMON alarms. This table is indexed by alarmIndex to provide an intuitive mapping between alarms and descriptions.

mbAlarmEntry

1.3.6.1.4.1.33.31.2.2.1

not-accessible

A description of an RMON alarm which summarizes the actual RMON alarm and event parameters corresponding to this entry.

INT mbAlarmCondition

1.3.6.1.4.1.33.31.2.2.1.1

INTEGER

read-write

Describes the current operational state of the alarm and allows you to make limited changes in the state of the alarm for purposes of managing its state. You may set this field to one of: underCreation, active, inactive, and delete. All other values report current status. underCreation: Alarm configuration is incomplete. You may modify alarm parameters. No monitoring is taking place for the alarm. An alarm is saved in a parameter file after configuration complete. Select this state before changing a previously completed alarm. active: Alarm configuration is complete and active monitoring of the alarm variable is in progress. Select this state to complete an alarm or to begin active monitioring of the alarm variable. inactive: No monitoring of the alarm variable is actively taking place. Select this state when you want to temporarily suppress monitoring for the alarm. Select 'active' to begin monitoring again. delete: Select this state when you want to delete this alarm and all log entries associated with it. held: Active monitoring of the alarm variable is not taking place because this system does not have RMON Repeater Management set to 'enabled'. Once you do this, alarm monitoring begins automatically. noHubCard: The target slot does not contain a management card or repeater I/O card capable of monitoring. Monitoring will begin automatically once the target slot is loaded with a supported configuration. oldFirmware: The I/O card in the target slot does not contain monitoring firmware. Monitoring will begin automatically once that card has been loaded with current scm firmware. slotTimeout: The target slot did not respond to attempts to activate the alarm. May happen if the management card in the target slot does not contain monitoring software. Monitoring begins automatically once the target slot has been repaired or loaded with current software. slotFailed: Active monitoring of the alarm variable stopped because the target slot was not operating properly. Monitoring automatically resumes once the target slot has recovered. monitorStopped: Active monitoring of the alarm variable stopped due to some error. This can occur if the variable no longer exists because a related configuration change has made it invalid. Correct the condition and re-activate the alarm. unknownVariable: The alarm variable specified by the object ID is not recognized in the currently running system. Correct the entry. keysMissing: One or more required key values are not specified in the alarm variable object ID. Correct the entry. noResources: Not enough system resources exist to activate this alarm. Allocate more packet buffers or increase free memory and re-activate the alarm. loading: The alarm is being read from a parameter file and will soon be activated. This condition is transient. activating: Monitoring of the alarm variable will begin soon. This condition is transient. deactivating: Monitoring of the alarm variable will stop soon. This condition is transient. unsupported: Monitoring for the alarm variable is not supported by the target slot. Monitoring will begin once that card is loaded with current scm firmware or software. unknownAlarm: Monitoring stopped because the target slot reset. Monitoring will continue shortly. inconsistency: Internal system error. invalidFlags: Internal system error. invalidSlot: Alarm specified for a slot which does not exist in the chassis. Modify and re-activate. inaccessible: Monitoring of the alarm variable could not begin. This can occur if the key values are invalid for the variable. Correct and re-activate the alarm. otherError: An unspecified error has occurred.

STR mbAlarmDescription

1.3.6.1.4.1.33.31.2.2.1.2

DisplayString

read-only

An easily-readable summary of an RMON alarm. The general format is: ' when is >= or <= .' is from: 'Do nothing', 'Create log record', 'Generate trap', 'Create log and trap', or 'Various actions', based on the alarm rising and falling event types. is one of 'value of' or 'change in', according to the alarm sample type. , if recognized, describes the quick list selection. If unlisted, the object identifier is substituted. and appear only if is recognized and represent phrases like 'slot', 'port', and 'any port'. and represent the rising and falling threshold values, respectively. The phrase describes the units per N seconds or the length of the sample interval in seconds.

mbLogTable

1.3.6.1.4.1.33.31.2.3

not-accessible

A list of RMON logTable entries.

mbLogEntry

1.3.6.1.4.1.33.31.2.3.1

not-accessible

A human-readable description of an RMON event.

INT mbLogIndex

1.3.6.1.4.1.33.31.2.3.1.1

INTEGER

read-only

An index uniquely identifying an entry in this log table. Each such entry describes, in human-readable format, an RMON event occurring for an alarm. All RMON log table entries are shown, ordered most recent first.

STR mbLogDescription

1.3.6.1.4.1.33.31.2.3.1.2

DisplayString

read-only

An easily-readable summary of an RMON log entry. The general format is: ': alarm is .' is the date and time the entry was created. is the alarm index causing the report. is one of 'value of for' or 'change of for', according to the alarm sample type. is the actual value triggering the report. , if recognized, describes the quick list selection. If unlisted, the object identifier is substituted. and appear only if is recognized and represent phrases like 'slot', 'port', and 'any port'. is one of '>= ' or '<= ' where and represent the rising and falling threshold values, respectively. The phrase describes the units per N seconds or the length of the sample interval in seconds.

mbResourceTable

1.3.6.1.4.1.33.31.2.4

not-accessible

A list of RMON resource entries.

mbResourceEntry

1.3.6.1.4.1.33.31.2.4.1

not-accessible

Values to control and monitor RMON resources.

INT mbResourceType

1.3.6.1.4.1.33.31.2.4.1.1

INTEGER

read-only

Identification of an RMON resource type. Typically each type corresponds to an RMON table whose size is to be controlled and monitored.

GAU mbResourceCurrent

1.3.6.1.4.1.33.31.2.4.1.2

Gauge

read-only

The number of entries currently allocated by RMON.

GAU mbResourceWorst

1.3.6.1.4.1.33.31.2.4.1.3

Gauge

read-only

The highest number of entries ever allocated by RMON since system initialization.

INT mbResourceMaximum

1.3.6.1.4.1.33.31.2.4.1.4

INTEGER

read-write

The desired maximum possible number of resources of this type RMON is permitted to use at any one time. Changes to alarm, event, and log entry resource settings take effect immediately. Changes to the statistics resource takes place after the system is initialized. For alarms and events, this value may not be set less than the current number of entries in use.

INT mbResourceOperMaximum

1.3.6.1.4.1.33.31.2.4.1.5

INTEGER

read-only

The actual maximum number of resources of this type RMON will attempt to use at any one time. This is the limit in effect for the current system.

xRmonMapTable

1.3.6.1.4.1.33.31.3

not-accessible

A list of RMON map entries.

xRmonMapEntry

1.3.6.1.4.1.33.31.3.1

not-accessible

Values to create RMON statistics tables for repeater ports.

INT xRmonMapSlot

1.3.6.1.4.1.33.31.3.1.1

INTEGER

read-write

The slot the statistics will come from.

INT xRmonMapPort

1.3.6.1.4.1.33.31.3.1.2

INTEGER

read-write

The port the statistics will come from.

INT xRmonMapIfIndex

1.3.6.1.4.1.33.31.3.1.3

INTEGER

read-only

The interface index (ifIndex) corresponding to this statistics table.

What Is ITOUCHHUB?

Supported Devices

Monitoring Examples

What Can Be Monitored

How to Use in IPNetwork Monitor

RFC description

ITOUCHHUB

What Is ITOUCHHUB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

How to Use in IPNetwork Monitor

RFC description