HUAWEI-L2MAM-MIB

All MIBs › HUAWEI-L2MAM-MIB

Organization: Huawei Technologies Co.,Ltd.

Last Updated: 2015-08-25

Category: VLAN and Bridging, Vendor: Huawei

Description: Huawei L2 MAC address management MIB for managing dynamic and static MAC address entries, MAC learning limits, and aging on Ethernet switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-L2MAM-MIB?

HUAWEI-L2MAM-MIB is a Huawei Technologies proprietary MIB managing Layer 2 MAC address forwarding and MAC-limit rules. Its objects cover a global max-MAC-limit, a static-FDB configuration table (MAC, VLAN ID, VSI name, port, type, row status, ATM port/VPI/VCI, CE-default flag), a dynamic-FDB table with the equivalent learned-entry fields and a dynamic-to-static conversion enable flag, and a MAC-limit table. As a configuration/status MIB it lets an administrator confirm static/dynamic MAC forwarding entries and per-port/VSI MAC-limit enforcement. It is deployed on Huawei Technologies switches/routers. Engineers can download the HUAWEI-L2MAM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-L2MAM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei Technologies switches/routers

Monitoring Examples

An administrator checks hwCfgFdbTable and hwMacLimitTable to confirm static MAC entries and per-VSI MAC-limit enforcement on a Huawei device.

What Can Be Monitored

static/dynamic MAC forwarding table and MAC-limit enforcement

Imported Objects

From ENTITY-MIB

PhysicalIndex
entPhysicalIndex	OBJECT-TYPE
entPhysicalName	OBJECT-TYPE

From HUAWEI-BASE-TRAP-MIB

hwBaseTrapEventType	OBJECT-TYPE
hwBaseTrapProbableCause	OBJECT-TYPE
hwBaseTrapSeverity	OBJECT-TYPE

From HUAWEI-L2IF-MIB

hwL2IfPortName

OBJECT-TYPE

From HUAWEI-MIB

hwDatacomm

OBJECT-IDENTITY

From HUAWEI-VPLS-EXT-MIB

hwVplsVsiName

OBJECT-TYPE

From IF-MIB

InterfaceIndex
InterfaceIndexOrZero
ifDescr	OBJECT-TYPE

From NQA-MIB

EnableValue

From P-BRIDGE-MIB

EnabledStatus

From Q-BRIDGE-MIB

VlanId
VlanIdOrNone

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

MacAddress
RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
hwL2Mgmt	1.3.6.1.4.1.2011.5.25.42
hwL2MAM	1.3.6.1.4.1.2011.5.25.42.2			This is the layer 2 mac-address management. It contains the layer 2 mac-address forwarding information currently operating on this device. And also contains the information of mac-limit rule.
hwL2MAMObjects	1.3.6.1.4.1.2011.5.25.42.2.1
I32 hwL2MaxMacLimit	1.3.6.1.4.1.2011.5.25.42.2.1.1	Integer32	read-only	The maximum of Mac-address limit rule.
hwdbCfgFdbTable	1.3.6.1.4.1.2011.5.25.42.2.1.2		not-accessible	The layer 2 Configured mac-address forwarding table .The table that contains the layer 2 mac-address forwarding information currently operating on this device.
hwdbCfgFdbEntry	1.3.6.1.4.1.2011.5.25.42.2.1.2.1		not-accessible	Entries of The layer 2 mac-address forwarding table.
MAC hwCfgFdbMac	1.3.6.1.4.1.2011.5.25.42.2.1.2.1.1	MacAddress	not-accessible	A unicast MAC address for which the device contains it's information in the mac-address table. The mac-address can't be a special address or multicast address.
VLA hwCfgFdbVlanId	1.3.6.1.4.1.2011.5.25.42.2.1.2.1.2	VlanIndex	not-accessible	The VLAN name or other identifier referring to the VLAN which is correlative to the hwFdbMac.
OCT hwCfgFdbVsiName	1.3.6.1.4.1.2011.5.25.42.2.1.2.1.3	OCTET STRING	not-accessible	The VSI-ID or other identifier referring to the VSI which is correlative to the hwFdbMac.
NUM hwCfgFdbPort	1.3.6.1.4.1.2011.5.25.42.2.1.2.1.4	InterfaceIndexOrZero	read-create	The forwarding port. The port must be an ethernet port. And the port must be contained by the hwFdbVlanId or allow the hwFdbVlanId get across through itself.
INT hwCfgFdbType	1.3.6.1.4.1.2011.5.25.42.2.1.2.1.5	INTEGER	read-create	The mac-address table item type of this entry. The meanings of the values are: static(2)- the mac-address is configured by user, doesn't aging out, and this entry doesn't lost after the device/FSU is reset or FSU is pulled out. blackhole(3)- the mac-address is configured by user for discarding frame which contains specific destination mac-address, doesn't aging out, and this entry doesn't lost after the device/FSU is reset or FSU is pulled out. When the type is dynamic ,the item can't be created.
ROW hwCfgFdbRowstatus	1.3.6.1.4.1.2011.5.25.42.2.1.2.1.6	RowStatus	read-create	The operating state of the row.
NUM hwCfgFdbAtmPort	1.3.6.1.4.1.2011.5.25.42.2.1.2.1.7	InterfaceIndexOrZero	read-create	The forwarding port. The port must be an atm port.
I32 hwCfgFdbVpi	1.3.6.1.4.1.2011.5.25.42.2.1.2.1.8	Integer32	read-create	The Virtual Path Identifier.
I32 hwCfgFdbVci	1.3.6.1.4.1.2011.5.25.42.2.1.2.1.9	Integer32	read-create	The Virtual Connection Identifier.
INT hwCfgFdbCeDefault	1.3.6.1.4.1.2011.5.25.42.2.1.2.1.10	INTEGER	read-create	The flag indicates whether the MAC address entry is configed according to ce-default-vlan. 'no-ce-default(0)' indicates no, 'ce-default(1)' indicates yes
hwdbDynFdbTable	1.3.6.1.4.1.2011.5.25.42.2.1.3		not-accessible	The layer 2 Dynamic (Leaned)mac-address forwarding table .The table that contains the layer 2 mac-address forwarding information currently operating on this device.
hwdbDynFdbEntry	1.3.6.1.4.1.2011.5.25.42.2.1.3.1		not-accessible	Entries of The layer 2 mac-address forwarding table.
MAC hwDynFdbMac	1.3.6.1.4.1.2011.5.25.42.2.1.3.1.1	MacAddress	not-accessible	A unicast MAC address for which the device contains it's information in the mac-address table. The mac-address can't be a special address or multicast address.
VLA hwDynFdbVlanId	1.3.6.1.4.1.2011.5.25.42.2.1.3.1.2	VlanIndex	not-accessible	The VLAN name or other identifier referring to the VLAN which is correlative to the hwFdbMac.
OCT hwDynFdbVsiName	1.3.6.1.4.1.2011.5.25.42.2.1.3.1.3	OCTET STRING	not-accessible	The VSI-ID or other identifier referring to the VSI which is correlative to the hwFdbMac.
NUM hwDynFdbPort	1.3.6.1.4.1.2011.5.25.42.2.1.3.1.4	InterfaceIndexOrZero	read-create	The forwarding port. The port must be an ethernet port. And the port must be contained by the hwFdbVlanId or allow the hwFdbVlanId get across through itself.
NUM hwDynFdbAtmPort	1.3.6.1.4.1.2011.5.25.42.2.1.3.1.5	InterfaceIndexOrZero	read-create	The forwarding port. The port must be an atm port.
I32 hwDynFdbVpi	1.3.6.1.4.1.2011.5.25.42.2.1.3.1.6	Integer32	read-create	The Virtual Path Identifier.
I32 hwDynFdbVci	1.3.6.1.4.1.2011.5.25.42.2.1.3.1.7	Integer32	read-create	The Virtual Connection Identifier.
ROW hwDynFdbRowstatus	1.3.6.1.4.1.2011.5.25.42.2.1.3.1.8	RowStatus	read-create	The operating state of the row.
ENA hwDynSecurityFdbToStaticEnable	1.3.6.1.4.1.2011.5.25.42.2.1.3.1.9	EnableValue	read-create	When this object is set to 'Enable(1)',if port security is enabled , the dynamic mac will convert to static.
hwMacLimitTable	1.3.6.1.4.1.2011.5.25.42.2.1.4		not-accessible	A table containing the mac-address learning-limit rule information for device. It can limit on ethernet interface,vlan,ethernet interface + vlan.
hwMacLimitEntry	1.3.6.1.4.1.2011.5.25.42.2.1.4.1		not-accessible	Entries of the mac-address learning-limit table.
NUM hwMacLimitPort	1.3.6.1.4.1.2011.5.25.42.2.1.4.1.1	InterfaceIndexOrZero	not-accessible	The port number which will be configured mac-limit.
I32 hwMacLimitVlanId	1.3.6.1.4.1.2011.5.25.42.2.1.4.1.2	Integer32	accessible-for-notify	The vlan id which will be configured mac-limit.
OCT hwMacLimitVsiName	1.3.6.1.4.1.2011.5.25.42.2.1.4.1.3	OCTET STRING	accessible-for-notify	The vsi name which will be configured mac-limit.
I32 hwMacLimitMaxMac	1.3.6.1.4.1.2011.5.25.42.2.1.4.1.4	Integer32	read-create	The maximum mac address. When the value is '0', the meaning is that there isn't limiting rule to the mac-address number.
I32 hwMacLimitMaxRate	1.3.6.1.4.1.2011.5.25.42.2.1.4.1.5	Integer32	read-create	The max mac-address learning rate. When the valu e is '0', the meaning is that there isn't limiting rule to the learning rate.
INT hwMacLimitAction	1.3.6.1.4.1.2011.5.25.42.2.1.4.1.6	INTEGER	read-create	The mac-address limit action of this entry. The meanings of the values are: discard(1)- Discard packets forward(2)- Forward packets.
INT hwMacLimitAlarm	1.3.6.1.4.1.2011.5.25.42.2.1.4.1.7	INTEGER	read-create	The mac-limit alarm switch of this entry. The meanings of the values are: disable(1), enable(2)
ROW hwMacLimitRowstatus	1.3.6.1.4.1.2011.5.25.42.2.1.4.1.8	RowStatus	read-create	The operating state of the row.
INT hwMacAddressLearn	1.3.6.1.4.1.2011.5.25.42.2.1.4.1.9	INTEGER	read-create	The flag of enable Mac address learn.
I32 hwMacDynAddressLearnNum	1.3.6.1.4.1.2011.5.25.42.2.1.4.1.10	Integer32	read-only	The number of learned dynamic MAC address .
I32 hwMacSecureAddressLearnNum	1.3.6.1.4.1.2011.5.25.42.2.1.4.1.11	Integer32	read-only	The number of learned secure MAC address .
hwMacUsageTable	1.3.6.1.4.1.2011.5.25.42.2.1.5		not-accessible	MAC usage table
hwMacUsageEntry	1.3.6.1.4.1.2011.5.25.42.2.1.5.1		not-accessible	MAC usage entry
I32 hwMacEntityUsage	1.3.6.1.4.1.2011.5.25.42.2.1.5.1.1	Integer32	read-only	MAC usage in every IO board
I32 hwMacEntityUsageThreshold	1.3.6.1.4.1.2011.5.25.42.2.1.5.1.2	Integer32	read-write	MAC usage range
hwdbCfg3tupleFdbTable	1.3.6.1.4.1.2011.5.25.42.2.1.6		not-accessible	The layer 2 configured mac-address forwarding table .The table that contains the layer 2 mac-address forwarding information currently operating on this device.
hwdbCfg3tupleFdbEntry	1.3.6.1.4.1.2011.5.25.42.2.1.6.1		not-accessible	Entries of The layer 2 mac-address forwarding table.
MAC hwdbCfg3tupleFdbMac	1.3.6.1.4.1.2011.5.25.42.2.1.6.1.1	MacAddress	not-accessible	A unicast MAC address for which the device contains it's information in the mac-address table. The mac-address can't be a special address or multicast address.
I32 hwdbCfg3tupleFdbVlanId	1.3.6.1.4.1.2011.5.25.42.2.1.6.1.2	Integer32	not-accessible	The VLAN name or other identifier referring to the VLAN which is correlative to the hwFdbMac.
NUM hwdbCfg3tupleFdbInPort	1.3.6.1.4.1.2011.5.25.42.2.1.6.1.3	InterfaceIndex	not-accessible	The input port. The port must be an ethernet port. And the port must be contained by the hwFdbVlanId or allow the hwFdbVlanId get across through itself.
NUM hwdbCfg3tupleFdbOutPort	1.3.6.1.4.1.2011.5.25.42.2.1.6.1.4	InterfaceIndex	read-create	The forwarding port. The port must be an ethernet port. And the port must be contained by the hwFdbVlanId or allow the hwFdbVlanId get across through itself.
ROW hwdbCfg3tupleFdbRowStatus	1.3.6.1.4.1.2011.5.25.42.2.1.6.1.5	RowStatus	read-create	The operating state of the row.
hwL2MacTraps	1.3.6.1.4.1.2011.5.25.42.2.1.7
NTF hwMacUsageRaisingThreshold	1.3.6.1.4.1.2011.5.25.42.2.1.7.1			Beyond the configurated Mac usage
NTF hwMacUsageFallingThreshold	1.3.6.1.4.1.2011.5.25.42.2.1.7.2			Resume the alarm of Mac usage
NTF hwMacLimitNumRaisingThreshold	1.3.6.1.4.1.2011.5.25.42.2.1.7.3			Beyond the mac limited learning number
NTF hwMacLimitNumFallingThreshold	1.3.6.1.4.1.2011.5.25.42.2.1.7.4			Resume the alarm of Mac usage
NTF hwUntargetMacNumAlarm	1.3.6.1.4.1.2011.5.25.42.2.1.7.5			Warning of untarget mac-address numbers.
NTF hwPortSecRcvInsecurePktAlarm	1.3.6.1.4.1.2011.5.25.42.2.1.7.6			Alarm of port perform the protect action shutdown or restrict when receiving insecure mac packets in the interface.
NTF hwPwMacLimitNumRaisingThreshold	1.3.6.1.4.1.2011.5.25.42.2.1.7.7			The number of MAC addresses that are learnt based on the PW reaches the upper limit.
NTF hwPwMacLimitNumFallingThreshold	1.3.6.1.4.1.2011.5.25.42.2.1.7.8			The number of MAC addresses that are learnt based on the PW falls below the upper limit.
NTF hwPortStickyReachMaxAlarm	1.3.6.1.4.1.2011.5.25.42.2.1.7.9			An alarm is generated when the number of sticky MAC address entries reaches the maximum value.
NTF hwRecIllegalMacPktAlarm	1.3.6.1.4.1.2011.5.25.42.2.1.7.10			The MAC addresses that received are illegal.
NTF hwMacLimitOverThresholdAlarm	1.3.6.1.4.1.2011.5.25.42.2.1.7.11			Beyond the mac limited learning number .
NTF hwMacFlappingAlarm	1.3.6.1.4.1.2011.5.25.42.2.1.7.12			Mac flapping alarm .
NTF hwSlotMacLimitNumRaisingThreshold	1.3.6.1.4.1.2011.5.25.42.2.1.7.13			The number of MAC addresses that are learnt based on the SLOT reaches the upper limit.
NTF hwSlotMacLimitNumFallingThreshold	1.3.6.1.4.1.2011.5.25.42.2.1.7.14			The number of MAC addresses that are learnt based on the SLOT falls below the upper limit.
NTF hwL2ProtocolTunnelDropThresholdRaising	1.3.6.1.4.1.2011.5.25.42.2.1.7.15			The number of the protocol transmit on the port reach the drop threshold.
NTF hwL2ProtocolTunnelDropThresholdFalling	1.3.6.1.4.1.2011.5.25.42.2.1.7.16			The number of the protocol transmit on the port below the drop threshold.
NTF hwVsiMacLimitNumRaisingThresholdAlarm	1.3.6.1.4.1.2011.5.25.42.2.1.7.17			The vsi Beyond the mac limited learning number .
NTF hwVsiMacLimitNumRaisingThresholdAlarmClear	1.3.6.1.4.1.2011.5.25.42.2.1.7.18			The vsi release from the mac limited learning number .
NTF hwMacLimitOverThresholdAlarmResume	1.3.6.1.4.1.2011.5.25.42.2.1.7.19			Less than the mac limited learning number .
NTF hwSlotMacNumRaisingThreshold	1.3.6.1.4.1.2011.5.25.42.2.1.7.20			This notification indicates the MAC usage of the slot raising the threshold.
NTF hwSlotMacNumFallingThreshold	1.3.6.1.4.1.2011.5.25.42.2.1.7.21			This notification indicates the MAC usage of the slot falling the threshold.
NTF hwMacLimitRuleNumRaisingThreshold	1.3.6.1.4.1.2011.5.25.42.2.1.7.22			Mac address is beyond the threshold of the global mac limit rule
NTF hwMacLimitRuleNumFallingThreshold	1.3.6.1.4.1.2011.5.25.42.2.1.7.23			Mac address is fall behind the threshold of the global mac limit rule.
NTF hwVplsOverGRENotSupportForwardRising	1.3.6.1.4.1.2011.5.25.42.2.1.7.24			The public network tunnel used to carry the VPLS PW is a GRE tunnel and the VPLS PW cannot forward traffic.
NTF hwVplsOverGRENotSupportForwardRisingResume	1.3.6.1.4.1.2011.5.25.42.2.1.7.25			The public network tunnel used to carry the VPLS PW is a non-GRE tunnel and the VPLS PW can forward traffic again.
NTF hwIfInputUnucFlowRisingThreshold	1.3.6.1.4.1.2011.5.25.42.2.1.7.28			Unknown unicast flow is beyond the alarm threshold.
NTF hwIfInputUnucFlowFallingThreshold	1.3.6.1.4.1.2011.5.25.42.2.1.7.29			Unknown unicast flow is fall behind the alarm threshold.
NTF hwMacHopAlarmRisingThreshold	1.3.6.1.4.1.2011.5.25.42.2.1.7.30			Mac hop is beyond the alarm threshold.
NTF hwMacHopAlarmFallingThreshold	1.3.6.1.4.1.2011.5.25.42.2.1.7.31			Mac hop is fall behind the alarm threshold.
NTF hwPstBroadcastLostAlarm	1.3.6.1.4.1.2011.5.25.42.2.1.7.32			The board cannot receive pst broadcast packet from other boards in one minute.
NTF hwPstBroadcastLostResume	1.3.6.1.4.1.2011.5.25.42.2.1.7.33			The board can receive pst broadcast packet from other boards in one minute.
NTF hwPwMacSpoofingAttackAlarm	1.3.6.1.4.1.2011.5.25.42.2.1.7.34			A PW received MAC spoofing packets from an interface.
NTF hwPwMacSpoofingAttackAlarmClear	1.3.6.1.4.1.2011.5.25.42.2.1.7.35			The alarm indicating that a PW received MAC spoofing packets from an interface was cleared.
NTF hwBdMacLimitOverThresholdAlarm	1.3.6.1.4.1.2011.5.25.42.2.1.7.36			Beyond the mac limited learning number.
NTF hwBdMacLimitOverThresholdAlarmResume	1.3.6.1.4.1.2011.5.25.42.2.1.7.37			Less than the mac limited learning number.
C64 hwUntargetMacNum	1.3.6.1.4.1.2011.5.25.42.2.1.8	Counter64	read-only	The number of untarget mac-address.
I32 hwMacAgingTime	1.3.6.1.4.1.2011.5.25.42.2.1.9	Integer32	read-write	The interval that the hardware deletes any entry whose hit bit is cleared and clears the hit bit of the remaining entries.The default value is 300 seconds.'0'means the MAC entries will be never aged.
ENA hwMacRestrict	1.3.6.1.4.1.2011.5.25.42.2.1.10	EnabledStatus	read-write	This object indicates whether MAC address learning restrict has been enabled for the system.
hwPortSecurityTable	1.3.6.1.4.1.2011.5.25.42.2.1.11		not-accessible	A table containing the port security information for device. It can protect the port from inaccessible mac.
hwPortSecurityEntry	1.3.6.1.4.1.2011.5.25.42.2.1.11.1		not-accessible	Entries of the port security table.
NUM hwPortSecurityPort	1.3.6.1.4.1.2011.5.25.42.2.1.11.1.1	InterfaceIndexOrZero	not-accessible	The port number which will be configured port security.
ENA hwPortSecurityEnabled	1.3.6.1.4.1.2011.5.25.42.2.1.11.1.2	EnabledStatus	read-write	When this object is set to 'enabled(1)' Port security is enabled on this port else disabled.
INT hwPortSecurityProtectAction	1.3.6.1.4.1.2011.5.25.42.2.1.11.1.3	INTEGER	read-write	The port security protect action of this entry. The meanings of the values are: restrict(1)- shutdown the port protect(2)- discard the unknow source mac packets and not learn shutdown(3)- send trap noaction(4)- broadcast the packet .
ENA hwPortSecurityAllDynToStaticEnable	1.3.6.1.4.1.2011.5.25.42.2.1.11.1.4	EnableValue	read-write	When this object is set to 'enable(1)' all dynamic mac-address on the Port will convert to static.
ENA hwPortSecurityAllDynToStickyEnable	1.3.6.1.4.1.2011.5.25.42.2.1.11.1.5	EnableValue	read-write	When this object is set to enable and port security is enabled, the dynamic MAC address entry will be changed to a sticky MAC address entry.
I32 hwPortSecurityMaxMacNum	1.3.6.1.4.1.2011.5.25.42.2.1.11.1.6	Integer32	read-write	The maximum mac address can be learned based on the port.
hwMacLimitGlobalRuleTable	1.3.6.1.4.1.2011.5.25.42.2.1.12		not-accessible	A table containing the global mac-address learning-limit rules information for device.
hwMacLimitGlobalRuleEntry	1.3.6.1.4.1.2011.5.25.42.2.1.12.1		not-accessible	Entries of the global mac-address learning-limit rule table.
OCT hwMacLimitGlobalRuleName	1.3.6.1.4.1.2011.5.25.42.2.1.12.1.1	OCTET STRING	not-accessible	The global mac-address learning-limit rule name.
I32 hwMacLimitRuleMaxMac	1.3.6.1.4.1.2011.5.25.42.2.1.12.1.11	Integer32	read-create	The maximum mac address. When the value is '0', the meaning is that there isn't limiting rule to the mac-address number.
I32 hwMacLimitRuleMaxRate	1.3.6.1.4.1.2011.5.25.42.2.1.12.1.12	Integer32	read-create	The max mac-address learning rate. When the valu e is '0', the meaning is that there isn't limiting rule to the learning rate.
INT hwMacLimitRuleAction	1.3.6.1.4.1.2011.5.25.42.2.1.12.1.13	INTEGER	read-create	The mac-address limit action of this entry. The meanings of the values are: discard(1)- Discard packets forward(2)- Forward packets.
INT hwMacLimitRuleAlarm	1.3.6.1.4.1.2011.5.25.42.2.1.12.1.14	INTEGER	read-create	The mac-limit alarm switch of this entry. The meanings of the values are: disable(1), enable(2)
ROW hwMacLimitRuleRowstatus	1.3.6.1.4.1.2011.5.25.42.2.1.12.1.51	RowStatus	read-create	The operating state of the row.
I32 hwMacRuleDynAddressLearnNum	1.3.6.1.4.1.2011.5.25.42.2.1.12.1.52	Integer32	read-only	The number of dynamic MAC address learned by the board.
hwMacLimitApplyRuleTable	1.3.6.1.4.1.2011.5.25.42.2.1.13		not-accessible	A table containing the global mac-address learning-limit rules and apply ports.
hwMacLimitApplyRuleEntry	1.3.6.1.4.1.2011.5.25.42.2.1.13.1		not-accessible	Entries of the global mac-address learning-limit rules and apply ports table.
NUM hwMacLimitApplyPort	1.3.6.1.4.1.2011.5.25.42.2.1.13.1.1	InterfaceIndexOrZero	not-accessible	The port number which apply the global mac-address learning-limit rule.
I32 hwMacLimitApplyVlanId	1.3.6.1.4.1.2011.5.25.42.2.1.13.1.2	Integer32	not-accessible	The vlan id which apply the global mac-address learning-limit rule.
OCT hwMacLimitApplyRuleName	1.3.6.1.4.1.2011.5.25.42.2.1.13.1.11	OCTET STRING	read-create	The global mac-address learning-limit rule name.
ROW hwMacLimitApplyRowstatus	1.3.6.1.4.1.2011.5.25.42.2.1.13.1.51	RowStatus	read-create	The operating state of the row.
I32 hwMacGlobalStatistics	1.3.6.1.4.1.2011.5.25.42.2.1.14	Integer32	read-only	The number of the global mac-address items.
hwMacIfStatisticsTable	1.3.6.1.4.1.2011.5.25.42.2.1.15		not-accessible	A table showing the number of mac-address items by interface index.
hwMacIfStatisticsEntry	1.3.6.1.4.1.2011.5.25.42.2.1.15.1		not-accessible	Entries of the statistics of mac-address table.
NUM hwMacIfStatisticsIfIndex	1.3.6.1.4.1.2011.5.25.42.2.1.15.1.1	InterfaceIndex	not-accessible	The interface index which is correlative to the hwIfMacStatistics table.
I32 hwMacIfStatistics	1.3.6.1.4.1.2011.5.25.42.2.1.15.1.2	Integer32	read-only	The number of the mac-address items.
hwMacSlotStatisticsTable	1.3.6.1.4.1.2011.5.25.42.2.1.16		not-accessible	A table showing the number of mac-address items by slot ID.
hwMacSlotStatisticsEntry	1.3.6.1.4.1.2011.5.25.42.2.1.16.1		not-accessible	Entries of the statistics of mac-address table.
I32 hwMacSlotStatisticsSlotId	1.3.6.1.4.1.2011.5.25.42.2.1.16.1.1	Integer32	not-accessible	The slot ID which is correlative to the hwMacSlotStatistics table.
I32 hwMacSlotStatistics	1.3.6.1.4.1.2011.5.25.42.2.1.16.1.2	Integer32	read-only	The number of the mac-address items by slot ID.
I32 hwMacSlotStatisticsSpecify	1.3.6.1.4.1.2011.5.25.42.2.1.16.1.3	Integer32	read-only	The specify max number of the mac-address items by slot ID.
hwMacVlanStatisticsTable	1.3.6.1.4.1.2011.5.25.42.2.1.17		not-accessible	A table showing the number of mac-address items by VLAN ID.
hwMacVlanStatisticsEntry	1.3.6.1.4.1.2011.5.25.42.2.1.17.1		not-accessible	Entries of the statistics of mac-address table.
VLA hwMacVlanStatisticsVlanId	1.3.6.1.4.1.2011.5.25.42.2.1.17.1.1	VlanId	not-accessible	The VLAN ID which is correlative to the hwMacVlanStatistics table.
I32 hwMacVlanStatistics	1.3.6.1.4.1.2011.5.25.42.2.1.17.1.2	Integer32	read-only	The number of the mac-address items.
hwMacVsiStatisticsTable	1.3.6.1.4.1.2011.5.25.42.2.1.18		not-accessible	A table showing the number of mac-address items by VSI name.
hwMacVsiStatisticsEntry	1.3.6.1.4.1.2011.5.25.42.2.1.18.1		not-accessible	Entries of the statistics of mac-address table.
OCT hwMacVsiStatisticsVsiName	1.3.6.1.4.1.2011.5.25.42.2.1.18.1.1	OCTET STRING	not-accessible	The VSI name which is correlative to the hwMacVsiStatistics table.
I32 hwMacVsiStatistics	1.3.6.1.4.1.2011.5.25.42.2.1.18.1.2	Integer32	read-only	The number of the mac-address items.
hwPwMacLimitTable	1.3.6.1.4.1.2011.5.25.42.2.1.19		not-accessible	This is a rule table for PW-based MAC learning limit.
hwPwMacLimitEntry	1.3.6.1.4.1.2011.5.25.42.2.1.19.1		not-accessible	Entries of a rule table for PW-based MAC learning limit.
OCT hwPwMacLimitVsiName	1.3.6.1.4.1.2011.5.25.42.2.1.19.1.1	OCTET STRING	not-accessible	This object indicates the name of the VSI that is configured with PW-based MAC learning limit.
OCT hwPwMacLimitPwName	1.3.6.1.4.1.2011.5.25.42.2.1.19.1.2	OCTET STRING	not-accessible	This object indicates the name of the PW that is configured with PW-based MAC learning limit.
I32 hwPwMacLimitMaxMac	1.3.6.1.4.1.2011.5.25.42.2.1.19.1.3	Integer32	read-create	The value of this object specifies the maximum number of MAC addresses that can be learnt. 0 indicates no limit.
I32 hwPwMacLimitMaxRate	1.3.6.1.4.1.2011.5.25.42.2.1.19.1.4	Integer32	read-create	The value of this object specifies the maximum rate for MAC address learning. 0 indicates no limit.
INT hwPwMacLimitAction	1.3.6.1.4.1.2011.5.25.42.2.1.19.1.5	INTEGER	read-create	The value of this object specifies whether packets are forwarded or discarded after the number of MAC addresses that are learnt reaches the upper limit: 1: packets are discarded 2: packets are forwarded
ENA hwPwMacLimitAlarm	1.3.6.1.4.1.2011.5.25.42.2.1.19.1.6	EnabledStatus	read-create	The value of this object specifies whether the alarm is enabled or disabled after the number of MAC addresses that are learnt reaches the upper limit: 1: alarm is enabled 2: alarm is disabled
ROW hwPwMacLimitRowstatus	1.3.6.1.4.1.2011.5.25.42.2.1.19.1.7	RowStatus	read-create	This object indicates the RowStatus of hwPwMacLimitTable.
ENA hwPwMacAddressLearn	1.3.6.1.4.1.2011.5.25.42.2.1.19.1.8	EnabledStatus	read-create	The object indicates whether MAC learning is enabled.
I32 hwPwMacDynAddressLearnNum	1.3.6.1.4.1.2011.5.25.42.2.1.19.1.9	Integer32	read-only	The value of this object specifies the number of dynamic MAC addresses that are learnt.
hwMacSpoofingDefendTable	1.3.6.1.4.1.2011.5.25.42.2.1.20		not-accessible	A table enable the MAC spoofing defend.
hwMacSpoofingDefendEntry	1.3.6.1.4.1.2011.5.25.42.2.1.20.1		not-accessible	Entries of the MAC spoofing defend table.
NUM hwMacSpoofingDefendPort	1.3.6.1.4.1.2011.5.25.42.2.1.20.1.1	InterfaceIndexOrZero	not-accessible	The port number which will be configured 1.1.1 MAC spoofing defend.
ENA hwMacSpoofingDefendEnabled	1.3.6.1.4.1.2011.5.25.42.2.1.20.1.2	EnabledStatus	read-write	When this object is set to 'enabled(1)' MAC spoofing defend is enabled on this port else disabled.
ENA hwDiscardIllegalMacEnable	1.3.6.1.4.1.2011.5.25.42.2.1.21	EnabledStatus	read-write	When this object is set to 'enabled(1)' illegal MAC will be discarded.
ENA hwDiscardIllegalMacAlarm	1.3.6.1.4.1.2011.5.25.42.2.1.22	EnabledStatus	read-write	When this object is set to 'enabled(1)' discard illegal MAC alarm is enabled else disabled.
ENA hwMacSpoofingDefend	1.3.6.1.4.1.2011.5.25.42.2.1.23	EnabledStatus	read-write	When this object is set to 'enabled(1)' MAC spoofing defend is enabled on global else disabled.
hwL2MacFlappingTrapObjects	1.3.6.1.4.1.2011.5.25.42.2.1.24
OCT hwMacflappingMac	1.3.6.1.4.1.2011.5.25.42.2.1.24.1	OCTET STRING	accessible-for-notify	The flapping mac-address.
I32 hwMacFlappingVlan	1.3.6.1.4.1.2011.5.25.42.2.1.24.2	Integer32	accessible-for-notify	The vlan of flapping mac.
hwSlotMacLimitTable	1.3.6.1.4.1.2011.5.25.42.2.1.25		not-accessible	This is a rule table for SLOT-based MAC learning limit.
hwSlotMacLimitEntry	1.3.6.1.4.1.2011.5.25.42.2.1.25.1		not-accessible	Entries of a rule table for SLOT-based MAC learning limit.
I32 hwSlotMacLimitId	1.3.6.1.4.1.2011.5.25.42.2.1.25.1.1	Integer32	not-accessible	This object indicates id of the SLOT that is configured with SLOT-based MAC learning limit.
I32 hwSlotMacLimitMaxMac	1.3.6.1.4.1.2011.5.25.42.2.1.25.1.2	Integer32	read-create	The value of this object specifies the maximum number of MAC addresses that can be learnt. 0 indicates no limit.
I32 hwSlotMacLimitMaxRate	1.3.6.1.4.1.2011.5.25.42.2.1.25.1.3	Integer32	read-create	The value of this object specifies the maximum rate for MAC address learning. 0 indicates no limit.
INT hwSlotMacLimitAction	1.3.6.1.4.1.2011.5.25.42.2.1.25.1.4	INTEGER	read-create	The value of this object specifies whether packets are forwarded or discarded after the number of MAC addresses that are learnt reaches the upper limit: 1: packets are discarded 2: packets are forwarded
INT hwSlotMacLimitAlarm	1.3.6.1.4.1.2011.5.25.42.2.1.25.1.5	INTEGER	read-create	The value of this object specifies whether the alarm is enabled or disabled after the number of MAC addresses that are learnt reaches the upper limit: 1: alarm is enabled 2: alarm is disabled
ROW hwSlotMacLimitRowstatus	1.3.6.1.4.1.2011.5.25.42.2.1.25.1.6	RowStatus	read-create	This object indicates the RowStatus of hwSlotMacLimitTable.
hwL2ProtocolTunnelTrapObjects	1.3.6.1.4.1.2011.5.25.42.2.1.26
OCT hwL2ProtocolTunnelTrapPortName	1.3.6.1.4.1.2011.5.25.42.2.1.26.1	OCTET STRING	accessible-for-notify	The port name for layer 2 protocol tunnel trap.
OCT hwL2ProtocolTunnelTrapProtocolName	1.3.6.1.4.1.2011.5.25.42.2.1.26.2	OCTET STRING	accessible-for-notify	The protocol name for layer 2 protocol tunnel trap.
I32 hwL2ProtocolTunnelTrapDropThreshold	1.3.6.1.4.1.2011.5.25.42.2.1.26.3	Integer32	accessible-for-notify	The drop rangle of layer 2 protocol tunnel.
hwL2ProtclTnlStdTable	1.3.6.1.4.1.2011.5.25.42.2.1.27		not-accessible	Group-MAC configuration table of standard L2 protocol tunnel.
hwL2ProtclTnlStdEntry	1.3.6.1.4.1.2011.5.25.42.2.1.27.1		not-accessible	This object indicates Group-MAC configuration table for standard L2 protocol tunnel.
OCT hwL2ProtclTnlStdProtclName	1.3.6.1.4.1.2011.5.25.42.2.1.27.1.1	OCTET STRING	not-accessible	This object indicates protocol name of standard L2 protocol tunnel.
MAC hwL2ProtclTnlStdProtclMacAddr	1.3.6.1.4.1.2011.5.25.42.2.1.27.1.2	MacAddress	read-only	This object indicates protocol MAC-Address of standard L2 protocol tunnel.
INT hwL2ProtclTnlStdEncapType	1.3.6.1.4.1.2011.5.25.42.2.1.27.1.3	INTEGER	read-only	This object indicates encapsulation type of standard L2 protocol tunnel.
I32 hwL2ProtclTnlStdProtclType	1.3.6.1.4.1.2011.5.25.42.2.1.27.1.4	Integer32	read-only	This object indicates protocol type of standard L2 protocol tunnel.
MAC hwL2ProtclTnlStdGroupMacAddr	1.3.6.1.4.1.2011.5.25.42.2.1.27.1.5	MacAddress	read-write	This object indicates group-MAC of standard L2 protocol tunnel.
MAC hwL2ProtclTnlStdGroupDefault	1.3.6.1.4.1.2011.5.25.42.2.1.27.1.6	MacAddress	read-write	This object indicates default group-MAC(0100-0ccd-cdd0) of standard L2 protocol tunnel.
I32 hwL2ProtclTnlStdPriority	1.3.6.1.4.1.2011.5.25.42.2.1.27.1.7	Integer32	read-write	This object indicates priority of standard L2 protocol tunnel.
hwL2ProtclTnlCusTable	1.3.6.1.4.1.2011.5.25.42.2.1.28		not-accessible	Group-MAC configuration table of customize L2 protocol tunnel.
hwL2ProtclTnlCusEntry	1.3.6.1.4.1.2011.5.25.42.2.1.28.1		not-accessible	This object indicates Group-MAC configuration table for customize L2 protocol tunnel.
OCT hwL2ProtclTnlCusProtclName	1.3.6.1.4.1.2011.5.25.42.2.1.28.1.1	OCTET STRING	not-accessible	This object indicates protocol name of customize L2 protocol tunnel.
MAC hwL2ProtclTnlCusProtclMacAddr	1.3.6.1.4.1.2011.5.25.42.2.1.28.1.2	MacAddress	read-create	This object indicates protocol MAC-Address of customize L2 protocol tunnel.
INT hwL2ProtclTnlCusEncapType	1.3.6.1.4.1.2011.5.25.42.2.1.28.1.3	INTEGER	read-create	This object indicates encapsulation type of customize L2 protocol tunnel.
I32 hwL2ProtclTnlCusProtclType	1.3.6.1.4.1.2011.5.25.42.2.1.28.1.4	Integer32	read-create	This object indicates protocol type of customize L2 protocol tunnel.
MAC hwL2ProtclTnlCusGroupMacAddr	1.3.6.1.4.1.2011.5.25.42.2.1.28.1.5	MacAddress	read-create	This object indicates group-MAC of customize L2 protocol tunnel.
MAC hwL2ProtclTnlCusGroupDefault	1.3.6.1.4.1.2011.5.25.42.2.1.28.1.6	MacAddress	read-create	This object indicates default group-MAC(0100-0ccd-cdd0) of customize L2 protocol tunnel.
I32 hwL2ProtclTnlCusPriority	1.3.6.1.4.1.2011.5.25.42.2.1.28.1.7	Integer32	read-create	This object indicates priority of customize L2 protocol tunnel.
ROW hwL2ProtclTnlCusRowStatus	1.3.6.1.4.1.2011.5.25.42.2.1.28.1.8	RowStatus	read-create	Used for controlling the creation and deletion of this row. All writeable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object to 'destroy' and there are one or more entries in hwQinQSubIfTermTable pointing to the row, the agent must also destroy the corresponding entries in hwL2ProtclTnlCusTable.
hwL2ProtclTnlEnableTable	1.3.6.1.4.1.2011.5.25.42.2.1.29		not-accessible	Port configuration table of L2 protocol tunnel.
hwL2ProtclTnlEnableEntry	1.3.6.1.4.1.2011.5.25.42.2.1.29.1		not-accessible	This object indicates port configuration table of L2 protocol tunnel.
NUM hwL2ProtclTnlEnableIfIndex	1.3.6.1.4.1.2011.5.25.42.2.1.29.1.1	InterfaceIndex	not-accessible	This object indicates interface index of port configuration of L2 protocol tunnel.
OCT hwL2ProtclTnlEnableProtclName	1.3.6.1.4.1.2011.5.25.42.2.1.29.1.2	OCTET STRING	not-accessible	This object indicates protocol name of port configuration of L2 protocol tunnel.
INT hwL2ProtclTnlEnableTransMode	1.3.6.1.4.1.2011.5.25.42.2.1.29.1.3	INTEGER	read-create	This object indicates transparent mode of port configuration of L2 protocol tunnel.
OCT hwL2ProtclTnlEnableTagListLow	1.3.6.1.4.1.2011.5.25.42.2.1.29.1.4	OCTET STRING	read-create	This object indicates VLAN list low of port configuration of L2 protocol tunnel.
OCT hwL2ProtclTnlEnableTagListHigh	1.3.6.1.4.1.2011.5.25.42.2.1.29.1.5	OCTET STRING	read-create	This object indicates VLAN list high of port configuration of L2 protocol tunnel.
I32 hwL2ProtclTnlEnableDropthresholdRate	1.3.6.1.4.1.2011.5.25.42.2.1.29.1.6	Integer32	read-write	This object indicates drop threshold rate(packet per second) of port configuration of L2 protocol tunnel.
ROW hwL2ProtclTnlEnableRowStatus	1.3.6.1.4.1.2011.5.25.42.2.1.29.1.7	RowStatus	read-create	Used for controlling the creation and deletion of this row. All writeable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object to 'destroy' and there are one or more entries in hwQinQSubIfTermTable pointing to the row, the agent must also destroy the corresponding entries in hwL2ProtclTnlEnableTable.
hwL2ProtclTnlStatisticsTable	1.3.6.1.4.1.2011.5.25.42.2.1.30		not-accessible	Statistics table of L2 protocol tunnel.
hwL2ProtclTnlStatisticsEntry	1.3.6.1.4.1.2011.5.25.42.2.1.30.1		not-accessible	This object indicates statistics table of L2 protocol tunnel.
NUM hwL2ProtclTnlStatisticsIfIndex	1.3.6.1.4.1.2011.5.25.42.2.1.30.1.1	InterfaceIndex	not-accessible	This object indicates interface index of statistics table of L2 protocol tunnel.
OCT hwL2ProtclTnlStatisticsProtclName	1.3.6.1.4.1.2011.5.25.42.2.1.30.1.2	OCTET STRING	not-accessible	This object indicates protocol name of statistics table of L2 protocol tunnel.
I32 hwL2ProtclTnlStatisticsDropthrhldRate	1.3.6.1.4.1.2011.5.25.42.2.1.30.1.3	Integer32	read-only	This object indicates drop threshold rate(packets per second) of statistics table of L2 protocol tunnel.
I32 hwL2ProtclTnlStatisticsInputPkts	1.3.6.1.4.1.2011.5.25.42.2.1.30.1.4	Integer32	read-only	This object indicates the number of input packets of statistics table of L2 protocol tunnel.
I32 hwL2ProtclTnlStatisticsOutputPkts	1.3.6.1.4.1.2011.5.25.42.2.1.30.1.5	Integer32	read-only	This object indicates the number of output packets of statistics table of L2 protocol tunnel.
I32 hwL2ProtclTnlStatisticsDropPkts	1.3.6.1.4.1.2011.5.25.42.2.1.30.1.6	Integer32	read-only	This object indicates the number of drop packets of statistics table of L2 protocol tunnel.
I32 hwBridgeMacAgingTime	1.3.6.1.4.1.2011.5.25.42.2.1.31	Integer32	read-write	The interval that the hardware deletes any entry whose hit bit is cleared and clears the hit bit of the remaining entries.The default value is 300 seconds.'0'means the MAC entries will be never aged.
hwCfgMacAddrQueryTable	1.3.6.1.4.1.2011.5.25.42.2.1.32		not-accessible	The query table of layer 2 Configured mac-address forwarding table.
hwCfgMacAddrQueryEntry	1.3.6.1.4.1.2011.5.25.42.2.1.32.1		not-accessible	Match entries of layer 2 Configured mac-address forwarding table lookup.
VLA hwCfgMacAddrQueryVlanId	1.3.6.1.4.1.2011.5.25.42.2.1.32.1.1	VlanIdOrNone	not-accessible	The VLAN ID for index of layer 2 Configured mac-address query table.
OCT hwCfgMacAddrQueryVsiName	1.3.6.1.4.1.2011.5.25.42.2.1.32.1.2	OCTET STRING	not-accessible	The vsi name for index of layer 2 Configured mac-address query table.
OCT hwCfgMacAddrQuerySiName	1.3.6.1.4.1.2011.5.25.42.2.1.32.1.3	OCTET STRING	not-accessible	The service instance name for index of layer 2 Configured mac-address query table.
I32 hwCfgMacAddrQueryBridgeId	1.3.6.1.4.1.2011.5.25.42.2.1.32.1.4	Integer32	not-accessible	The bridge ID for index of layer 2 Configured mac-address query table.
MAC hwCfgMacAddrQueryMacAddr	1.3.6.1.4.1.2011.5.25.42.2.1.32.1.5	MacAddress	not-accessible	A unicast MAC address for index of layer 2 Configured mac-address query table.
INT hwCfgMacAddrQueryConditionMode	1.3.6.1.4.1.2011.5.25.42.2.1.32.1.6	INTEGER	not-accessible	Mode for query condition of layer 2 Configured mac-address query table.
OCT hwCfgMacAddrQueryConditionStringA	1.3.6.1.4.1.2011.5.25.42.2.1.32.1.7	OCTET STRING	not-accessible	String A (may be VSI or SI etc.) for query condition of layer 2 Configured mac-address query table.
OCT hwCfgMacAddrQueryConditionStringB	1.3.6.1.4.1.2011.5.25.42.2.1.32.1.8	OCTET STRING	not-accessible	String B (may be MAC or MAC type etc.) for query condition of layer 2 Configured mac-address query table.
U32 hwCfgMacAddrQueryConditionDigitA	1.3.6.1.4.1.2011.5.25.42.2.1.32.1.9	Unsigned32	not-accessible	Digit A (may be VLAN ID etc.) for query condition of layer 2 Configured mac-address query table.
U32 hwCfgMacAddrQueryConditionDigitB	1.3.6.1.4.1.2011.5.25.42.2.1.32.1.10	Unsigned32	not-accessible	Digit B (may be IF index etc.) for query condition of layer 2 Configured mac-address query table.
U32 hwCfgMacAddrQueryConditionDigitC	1.3.6.1.4.1.2011.5.25.42.2.1.32.1.11	Unsigned32	not-accessible	Digit C (other integer info) for query condition of layer 2 Configured mac-address query table.
OCT hwCfgMacAddrQueryType	1.3.6.1.4.1.2011.5.25.42.2.1.32.1.12	OCTET STRING	read-only	The entry type for match item of layer 2 Configured mac-address query table.
NUM hwCfgMacAddrQueryIfIndex	1.3.6.1.4.1.2011.5.25.42.2.1.32.1.13	InterfaceIndexOrZero	read-only	The interface index for match item of layer 2 Configured mac-address query table.
VLA hwCfgMacAddrQueryPeVlanId	1.3.6.1.4.1.2011.5.25.42.2.1.32.1.14	VlanIdOrNone	read-only	The PE VLAN ID for match item of layer 2 Configured mac-address query table.
VLA hwCfgMacAddrQueryCeVlanId	1.3.6.1.4.1.2011.5.25.42.2.1.32.1.15	VlanIdOrNone	read-only	The CE VLAN ID for match item of layer 2 Configured mac-address query table.
INT hwCfgMacAddrQueryCedefaultFlag	1.3.6.1.4.1.2011.5.25.42.2.1.32.1.16	INTEGER	read-only	The CE default flag for match item of layer 2 Configured mac-address query table.
NUM hwCfgMacAddrQueryAtmIfIndex	1.3.6.1.4.1.2011.5.25.42.2.1.32.1.17	InterfaceIndexOrZero	read-only	The ATM interface index for match item of layer 2 Configured mac-address query table.
I32 hwCfgMacAddrQueryVpi	1.3.6.1.4.1.2011.5.25.42.2.1.32.1.18	Integer32	read-only	The VPI for match item of layer 2 Configured mac-address query table.
I32 hwCfgMacAddrQueryVci	1.3.6.1.4.1.2011.5.25.42.2.1.32.1.19	Integer32	read-only	The VCI for match item of layer 2 Configured mac-address query table.
OCT hwCfgMacAddrQueryMacTunnel	1.3.6.1.4.1.2011.5.25.42.2.1.32.1.20	OCTET STRING	read-only	The MAC tunnel for match item of layer 2 Configured mac-address query table.
hwDynMacAddrQueryTable	1.3.6.1.4.1.2011.5.25.42.2.1.33		not-accessible	The query table of layer 2 dynamic mac-address forwarding table.
hwDynMacAddrQueryEntry	1.3.6.1.4.1.2011.5.25.42.2.1.33.1		not-accessible	Match entries of layer 2 dynamic mac-address forwarding table lookup.
VLA hwDynMacAddrQueryVlanId	1.3.6.1.4.1.2011.5.25.42.2.1.33.1.1	VlanIdOrNone	not-accessible	The VLAN ID for index of layer 2 dynamic mac-address query table.
OCT hwDynMacAddrQueryVsiName	1.3.6.1.4.1.2011.5.25.42.2.1.33.1.2	OCTET STRING	not-accessible	The vsi name for index of layer 2 dynamic mac-address query table.
OCT hwDynMacAddrQuerySiName	1.3.6.1.4.1.2011.5.25.42.2.1.33.1.3	OCTET STRING	not-accessible	The service instance name for index of layer 2 dynamic mac-address query table.
I32 hwDynMacAddrQueryBridgeId	1.3.6.1.4.1.2011.5.25.42.2.1.33.1.4	Integer32	not-accessible	The bridge ID for index of layer 2 dynamic mac-address query table.
MAC hwDynMacAddrQueryMacAddr	1.3.6.1.4.1.2011.5.25.42.2.1.33.1.5	MacAddress	not-accessible	A unicast MAC address for index of layer 2 dynamic mac-address query table.
INT hwDynMacAddrQueryConditionMode	1.3.6.1.4.1.2011.5.25.42.2.1.33.1.6	INTEGER	not-accessible	Mode for query condition of layer 2 dynamic mac-address query table.
OCT hwDynMacAddrQueryConditionStringA	1.3.6.1.4.1.2011.5.25.42.2.1.33.1.7	OCTET STRING	not-accessible	String A (may be VSI or SI etc.) for query condition of layer 2 dynamic mac-address query table.
OCT hwDynMacAddrQueryConditionStringB	1.3.6.1.4.1.2011.5.25.42.2.1.33.1.8	OCTET STRING	not-accessible	String B (may be MAC or MAC type etc.) for query condition of layer 2 dynamic mac-address query table.
U32 hwDynMacAddrQueryConditionDigitA	1.3.6.1.4.1.2011.5.25.42.2.1.33.1.9	Unsigned32	not-accessible	Digit A (may be VLAN ID etc.) for query condition of layer 2 dynamic mac-address query table.
U32 hwDynMacAddrQueryConditionDigitB	1.3.6.1.4.1.2011.5.25.42.2.1.33.1.10	Unsigned32	not-accessible	Digit B (may be IF index etc.) for query condition of layer 2 dynamic mac-address query table.
U32 hwDynMacAddrQueryConditionDigitC	1.3.6.1.4.1.2011.5.25.42.2.1.33.1.11	Unsigned32	not-accessible	Digit C (other integer info) for query condition of layer 2 dynamic mac-address query table.
OCT hwDynMacAddrQueryType	1.3.6.1.4.1.2011.5.25.42.2.1.33.1.12	OCTET STRING	read-only	The entry type for match item of layer 2 dynamic mac-address query table.
NUM hwDynMacAddrQueryIfIndex	1.3.6.1.4.1.2011.5.25.42.2.1.33.1.13	InterfaceIndexOrZero	read-only	The interface index for match item of layer 2 dynamic mac-address query table.
VLA hwDynMacAddrQueryPeVlanId	1.3.6.1.4.1.2011.5.25.42.2.1.33.1.14	VlanIdOrNone	read-only	The PE VLAN ID for match item of layer 2 dynamic mac-address query table.
VLA hwDynMacAddrQueryCeVlanId	1.3.6.1.4.1.2011.5.25.42.2.1.33.1.15	VlanIdOrNone	read-only	The CE VLAN ID for match item of layer 2 dynamic mac-address query table.
NUM hwDynMacAddrQueryAtmIfIndex	1.3.6.1.4.1.2011.5.25.42.2.1.33.1.16	InterfaceIndexOrZero	read-only	The ATM interface index for match item of layer 2 dynamic mac-address query table.
I32 hwDynMacAddrQueryVpi	1.3.6.1.4.1.2011.5.25.42.2.1.33.1.17	Integer32	read-only	The VPI for match item of layer 2 dynamic mac-address query table.
I32 hwDynMacAddrQueryVci	1.3.6.1.4.1.2011.5.25.42.2.1.33.1.18	Integer32	read-only	The VCI for match item of layer 2 dynamic mac-address query table.
IP hwDynMacAddrQueryPeerIp	1.3.6.1.4.1.2011.5.25.42.2.1.33.1.19	IpAddress	read-only	The peer ip address for match item of layer 2 dynamic mac-address query table.
U32 hwDynMacAddrQueryPwId	1.3.6.1.4.1.2011.5.25.42.2.1.33.1.20	Unsigned32	read-only	The PW ID for match item of layer 2 dynamic mac-address query table.
OCT hwDynMacAddrQueryMacTunnel	1.3.6.1.4.1.2011.5.25.42.2.1.33.1.21	OCTET STRING	read-only	The MAC tunnel for match item of layer 2 dynamic mac-address query table.
I32 hwDynMacAddrQueryAgingTime	1.3.6.1.4.1.2011.5.25.42.2.1.33.1.22	Integer32	read-only	The aging time for match item of layer 2 dynamic mac-address query table.
hwMacInfoQueryTable	1.3.6.1.4.1.2011.5.25.42.2.1.34		not-accessible	The MAC address information of layer 2 mac-address database.
hwMacInfoQueryEntry	1.3.6.1.4.1.2011.5.25.42.2.1.34.1		not-accessible	Match information of layer 2 mac-address database.
INT hwMacInfoQueryConditionMode	1.3.6.1.4.1.2011.5.25.42.2.1.34.1.1	INTEGER	not-accessible	Mode for query condition of layer 2 dynamic mac-address query table.
OCT hwMacInfoQueryConditionStringA	1.3.6.1.4.1.2011.5.25.42.2.1.34.1.2	OCTET STRING	not-accessible	String A (may be VSI or SI etc.) for query condition of layer 2 mac-address database.
OCT hwMacInfoQueryConditionStringB	1.3.6.1.4.1.2011.5.25.42.2.1.34.1.3	OCTET STRING	not-accessible	String B (may be MAC or MAC type etc.) for query condition of layer 2 mac-address database.
OCT hwMacInfoQueryConditionStringC	1.3.6.1.4.1.2011.5.25.42.2.1.34.1.4	OCTET STRING	not-accessible	String C (may be MAC tunnel etc.) for query condition of layer 2 mac-address database.
U32 hwMacInfoQueryConditionDigitA	1.3.6.1.4.1.2011.5.25.42.2.1.34.1.5	Unsigned32	not-accessible	Digit A (may be VLAN ID etc.) for query condition of layer 2 mac-address database.
U32 hwMacInfoQueryConditionDigitB	1.3.6.1.4.1.2011.5.25.42.2.1.34.1.6	Unsigned32	not-accessible	Digit B (may be IF index etc.) for query condition of layer 2 mac-address database.
U32 hwMacInfoQueryConditionDigitC	1.3.6.1.4.1.2011.5.25.42.2.1.34.1.7	Unsigned32	not-accessible	Digit C (other integer info) for query condition of layer 2 mac-address database.
U32 hwMacInfoQueryTotalNumber	1.3.6.1.4.1.2011.5.25.42.2.1.34.1.8	Unsigned32	read-only	The total number for match condition of layer 2 mac-address database.
U32 hwMacInfoQueryTotalLocalNumber	1.3.6.1.4.1.2011.5.25.42.2.1.34.1.9	Unsigned32	read-only	The total local number for match condition of layer 2 mac-address database.
U32 hwMacInfoQueryTotalRemoteNumber	1.3.6.1.4.1.2011.5.25.42.2.1.34.1.10	Unsigned32	read-only	The total remote number for match condition of layer 2 mac-address database.
U32 hwMacInfoQueryCapacity	1.3.6.1.4.1.2011.5.25.42.2.1.34.1.11	Unsigned32	read-only	The capacity for match condition of layer 2 mac-address database.
hwVplsOverGreTable	1.3.6.1.4.1.2011.5.25.42.2.1.35		not-accessible	A table containing the VPLS over GRE information for device.
hwVplsOverGreEntry	1.3.6.1.4.1.2011.5.25.42.2.1.35.1		not-accessible	Entries of the VPLS over GRE table.
I32 hwVplsOverGrePwId	1.3.6.1.4.1.2011.5.25.42.2.1.35.1.1	Integer32	not-accessible	The PW ID which will be configured over GRE.
IP hwRemoteIp	1.3.6.1.4.1.2011.5.25.42.2.1.35.1.2	IpAddress	accessible-for-notify	The remote ip address of the PW ID.
OCT hwVplsOverGreVsiName	1.3.6.1.4.1.2011.5.25.42.2.1.35.1.3	OCTET STRING	accessible-for-notify	The vsi name which will be configured over GRE.
hwVllByPassOverGreTable	1.3.6.1.4.1.2011.5.25.42.2.1.36		not-accessible	A table containing the ByPass PW for VLL over GRE information for device.
hwVllByPassOverGreEntry	1.3.6.1.4.1.2011.5.25.42.2.1.36.1		not-accessible	Entries of the ByPass PW for VLL over GRE table.
I32 hwVLLACPortIndex	1.3.6.1.4.1.2011.5.25.42.2.1.36.1.1	Integer32	not-accessible	The port index which will be configured ByPass for VLL.
OCT hwVLLACPortName	1.3.6.1.4.1.2011.5.25.42.2.1.36.1.2	OCTET STRING	accessible-for-notify	The Port name which will be configured ByPass for VLL.
hwUnucFlowAlarmTable	1.3.6.1.4.1.2011.5.25.42.2.1.37		not-accessible	A table containing the unknown unicast alarm information for interface.
hwUnucFlowAlarmEntry	1.3.6.1.4.1.2011.5.25.42.2.1.37.1		not-accessible	Entries of unknown unicast alarm information for interface table.
I32 hwUNUCPortIndex	1.3.6.1.4.1.2011.5.25.42.2.1.37.1.1	Integer32	not-accessible	The port index which will be configured unknown unicast alarm.
OCT hwUNUCPortName	1.3.6.1.4.1.2011.5.25.42.2.1.37.1.2	OCTET STRING	accessible-for-notify	The Port name which will be configured unknown unicast alarm.
I32 hwUNUCPortAlarmThreshold	1.3.6.1.4.1.2011.5.25.42.2.1.37.1.3	Integer32	accessible-for-notify	The port alarm threshold which will be configured unknown unicast alarm.
I32 hwUNUCPortRealFlow	1.3.6.1.4.1.2011.5.25.42.2.1.37.1.4	Integer32	accessible-for-notify	The port real unuc flow.
hwMacHopAlarmTable	1.3.6.1.4.1.2011.5.25.42.2.1.38		not-accessible	A table containing the mac hop alarm information.
hwMacHopAlarmEntry	1.3.6.1.4.1.2011.5.25.42.2.1.38.1		not-accessible	Entries of mac hop alarm information for interface table.
U32 hwMacHopVlan	1.3.6.1.4.1.2011.5.25.42.2.1.38.1.1	Unsigned32	accessible-for-notify	The VLAN ID of mac hop.
OCT hwMacHopVsiName	1.3.6.1.4.1.2011.5.25.42.2.1.38.1.2	OCTET STRING	accessible-for-notify	The VSI of mac hop.
U32 hwMacHopBdID	1.3.6.1.4.1.2011.5.25.42.2.1.38.1.3	Unsigned32	accessible-for-notify	The BD id of mac hop.
OCT hwMacHopPortName1	1.3.6.1.4.1.2011.5.25.42.2.1.38.1.4	OCTET STRING	accessible-for-notify	The Port name of Mac-hopping.
OCT hwMacHopPortName2	1.3.6.1.4.1.2011.5.25.42.2.1.38.1.5	OCTET STRING	accessible-for-notify	The Port name of Mac-hopping.
OCT hwMacHopPortName3	1.3.6.1.4.1.2011.5.25.42.2.1.38.1.6	OCTET STRING	accessible-for-notify	The Port name of Mac-hopping.
OCT hwMacHopPortName4	1.3.6.1.4.1.2011.5.25.42.2.1.38.1.7	OCTET STRING	accessible-for-notify	The Port name of Mac-hopping.
OCT hwMacHopPWInfo	1.3.6.1.4.1.2011.5.25.42.2.1.38.1.8	OCTET STRING	accessible-for-notify	The PW info of Mac-hopping.
MAC hwPwMacSpoofingAttackMacAddr	1.3.6.1.4.1.2011.5.25.42.2.1.39	MacAddress	accessible-for-notify	A unicast MAC address for PW mac spoofing.
I32 hwBdMacLimitBdId	1.3.6.1.4.1.2011.5.25.42.2.1.40	Integer32	accessible-for-notify	The bd id which will be configured mac-limit.
MAC hwBdMacLimitMaxMac	1.3.6.1.4.1.2011.5.25.42.2.1.41	MacAddress	accessible-for-notify	The maximum mac address. When the value is '0', the meaning is that there isn't limiting rule to the mac-address number.
hwL2MAMConformance	1.3.6.1.4.1.2011.5.25.42.2.2
hwL2MAMGroups	1.3.6.1.4.1.2011.5.25.42.2.2.1
hwL2MAMCfgFdbGroup	1.3.6.1.4.1.2011.5.25.42.2.2.1.1			A collection of objects providing information about level 2 configured mac-address table.
hwL2MAMDynFdbGroup	1.3.6.1.4.1.2011.5.25.42.2.2.1.2			A collection of objects providing information about level 2 Dynamic mac-address table.
hwL2MAMMacLimitGroup	1.3.6.1.4.1.2011.5.25.42.2.2.1.3			A collection of objects providing information about mac-address limit rules.
hwL2MAMMacUsageGroup	1.3.6.1.4.1.2011.5.25.42.2.2.1.4			A collection of objects providing information about mac-address usage.
hwdbCfg3tupleFdbGroup	1.3.6.1.4.1.2011.5.25.42.2.2.1.5			A collection of objects providing information about level 2 configured 3-tuple mac-address table.
hwL2MAMObjectsGroup	1.3.6.1.4.1.2011.5.25.42.2.2.1.6			A collection of objects providing information about mac-address configuration.
hwPortSecurityGroup	1.3.6.1.4.1.2011.5.25.42.2.2.1.7			A table containing the port security information for device. It can protect the port from unaccessible mac.
hwMacIfStatisticsGroup	1.3.6.1.4.1.2011.5.25.42.2.2.1.8			A collection of objects providing information about mac-address statistics by interface index.
hwMacSlotStatisticsGroup	1.3.6.1.4.1.2011.5.25.42.2.2.1.9			A collection of objects providing information about mac-address statistics by slot ID.
hwMacVlanStatisticsGroup	1.3.6.1.4.1.2011.5.25.42.2.2.1.10			A collection of objects providing information about mac-address statistics by VLAN ID.
hwMacVsiStatisticsGroup	1.3.6.1.4.1.2011.5.25.42.2.2.1.11			A collection of objects providing information about mac-address statistics by VSI name.
hwMacSpoofingDefendGroup	1.3.6.1.4.1.2011.5.25.42.2.2.1.12			A collection of objects providing information about MAC spoofing defend.
hwL2ProtocolTunnelTrapGroup	1.3.6.1.4.1.2011.5.25.42.2.2.1.13			A collection of items of objects information of L2 Protocol Tunnel Trap notify.
hwL2ProtclTnlStdProtclGroup	1.3.6.1.4.1.2011.5.25.42.2.2.1.14			A collection of items of configuration table of standard L2 protocol tunnel.
hwL2ProtclTnlCusProtclGroup	1.3.6.1.4.1.2011.5.25.42.2.2.1.15			A collection of items of configuration table of customize L2 protocol tunnel.
hwL2ProtclTnlEnableGroup	1.3.6.1.4.1.2011.5.25.42.2.2.1.16			A collection of items of port configuration of L2 protocol tunnel.
hwL2ProtclTnlStatisticsGroup	1.3.6.1.4.1.2011.5.25.42.2.2.1.17			A collection of items of port statistics of L2 protocol tunnel.
hwCfgMacAddrQueryTableGroup	1.3.6.1.4.1.2011.5.25.42.2.2.1.18			A collection of items of layer 2 Configured mac-address query table.
hwDynMacAddrQueryTableGroup	1.3.6.1.4.1.2011.5.25.42.2.2.1.19			A collection of items of layer 2 dynamic mac-address query table.
hwMacInfoQueryTableGroup	1.3.6.1.4.1.2011.5.25.42.2.2.1.20			A collection of items of layer 2 mac-address database query.
hwL2MAMCompliances	1.3.6.1.4.1.2011.5.25.42.2.2.2
hwL2MAMCompliance	1.3.6.1.4.1.2011.5.25.42.2.2.2.1			The compliance statement for device support of Level 2 Mac-address management.
hwL2MACTrapGroups	1.3.6.1.4.1.2011.5.25.42.2.2.3
hwBaseTrapGroup	1.3.6.1.4.1.2011.5.25.42.2.2.3.2			L2 MAC tap group.

RFC description

Layer 2 MAC address management, forwarding information, and MAC limit rules for Huawei devices.

Start monitoring Huawei switch or router (Layer 2 MAC address/MAC-limit management) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-L2MAM-MIB

What Is HUAWEI-L2MAM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description