HUAWEI-L2MULTICAST-MIB

All MIBs › HUAWEI-L2MULTICAST-MIB

Organization: Huawei Technologies co.,Ltd.

Last Updated: 2008-12-30

Category: Technology: Multicast, Vendor: Huawei

Description: Huawei Layer 2 multicast MIB for managing IGMP snooping, MLD snooping, and multicast group forwarding on Huawei Layer 2 switching platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-L2MULTICAST-MIB?

HUAWEI-L2MULTICAST-MIB is a Huawei-specific MIB for Layer 2 switching platforms that manages IGMP and MLD snooping, the mechanism switches use to selectively forward multicast traffic based on group membership instead of flooding it to every port. It exposes configuration data such as per-VLAN and per-VSI multicast settings, query intervals, and router aging timers, alongside enable/disable flags for the snooping service. It is primarily useful for monitoring the software/protocol health of the switch's multicast handling: whether snooping is actually enabled where expected, whether query and aging timers are set correctly, and whether the multicast router-facing interface is being tracked properly. It works alongside standard IETF multicast MIBs but adds Huawei-specific VLAN/VSI granularity not covered by those standards. It is typically deployed on Huawei enterprise and carrier Layer 2 switches, including VPLS/VSI-enabled platforms, to keep multicast video/data delivery efficient and to avoid unnecessary flooding, and the HUAWEI-L2MULTICAST-MIB download lets administrators load it directly into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-L2MULTICAST-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei Layer 2 switches
Huawei VPLS/VSI-capable switches

Monitoring Examples

An administrator would poll hwL2mcCfgTable/hwL2mcCfgEntry, indexed by hwL2mcVlanIndex or hwL2mcVsiName, to check hwL2mcEnabled per VLAN and confirm snooping hasn't been silently disabled after a config change. Watching hwL2mcRouterAgingTime and hwL2mcMaxQueryRespTime together with hwL2mcLastMemQueryInterval can reveal a misconfigured timer causing multicast groups to age out too quickly, which shows up as intermittent multicast stream drops. hwSendQueryEnabled and hwSendQuerySourceIpAddr indicate whether the switch itself is generating IGMP queries, useful when troubleshooting a network with no external multicast router.

What Can Be Monitored

IGMP/MLD snooping enable status per VLAN
multicast router aging time
query response and last-member-query intervals
query source IP address
VSI-based multicast configuration

Imported Objects

From HUAWEI-MIB

hwDatacomm

OBJECT-IDENTITY

From IF-MIB

InterfaceIndex
InterfaceIndexOrZero

From P-BRIDGE-MIB

EnabledStatus

From Q-BRIDGE-MIB

VlanIdOrAny

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
STR hwChnlCfgChnlName	1.3.6.1.4.1.2011.5.25.181.1.9.1.1.3	DisplayString	not-accessible	The channel name.
INT hwChnlCfgChnlType	1.3.6.1.4.1.2011.5.25.181.1.9.1.1.9	INTEGER	read-create	The channel type: 1: SSM 2: ASM
STR hwChnlCfgGroupChnlName	1.3.6.1.4.1.2011.5.25.181.1.15.1.1.3	DisplayString	not-accessible	The channel name.
ROW hwChnlCfgRowStatus	1.3.6.1.4.1.2011.5.25.181.1.9.1.1.100	RowStatus	read-create	The row status.
VLA hwChnlCfgVlanIndex	1.3.6.1.4.1.2011.5.25.181.1.9.1.1.1	VlanIdOrAny	not-accessible	The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 0. If both hwChnlCfgVlanIndex and hwChnlCfgVSIName are invalid, the configuration is global. The value ranges from 1 to 4095.
STR hwChnlCfgVsiName	1.3.6.1.4.1.2011.5.25.181.1.9.1.1.2	DisplayString	not-accessible	The name of a VSI. If a VLAN is specified, the value is 0. If both hwChnlCfgVlanIndex and hwChnlCfgVSIName are invalid, the configuration is global.
INT hwChnlDenyCfg	1.3.6.1.4.1.2011.5.25.181.1.17.1.1.3	INTEGER	read-create	Whether discard unspecified channel: 1: not discard 2: discard
ROW hwChnlDenyCfgRowStatus	1.3.6.1.4.1.2011.5.25.181.1.17.1.1.100	RowStatus	read-create	The row status.
VLA hwChnlDenyCfgVlanIndex	1.3.6.1.4.1.2011.5.25.181.1.17.1.1.1	VlanIdOrAny	not-accessible	The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. If both hwChnlCfgVlanIndex and hwChnlCfgVSIName are invalid, the configuration is global. The value ranges from 1 to 4095.
STR hwChnlDenyCfgVsiName	1.3.6.1.4.1.2011.5.25.181.1.17.1.1.2	DisplayString	not-accessible	The name of a VSI. If a VLAN is specified, the value is 0. If both hwChnlCfgVlanIndex and hwChnlCfgVSIName are invalid, the configuration is global.
IP hwChnlGroupCfgGroupAddress	1.3.6.1.4.1.2011.5.25.181.1.15.1.1.4	IpAddress	not-accessible	The group address of a multicast group. In the case of MAC forwarding, the group address is the smallest of 32 IP addresses.
I32 hwChnlGroupCfgGroupLen	1.3.6.1.4.1.2011.5.25.181.1.15.1.1.5	Integer32	not-accessible	The mask length of a multicast group.
I32 hwChnlGroupCfgPerBand	1.3.6.1.4.1.2011.5.25.181.1.15.1.1.9	Integer32	read-create	The bandwidth of a multicast group.
ROW hwChnlGroupCfgRowStatus	1.3.6.1.4.1.2011.5.25.181.1.15.1.1.100	RowStatus	read-create	The row status.
IP hwChnlGroupCfgSourceAddress	1.3.6.1.4.1.2011.5.25.181.1.15.1.1.6	IpAddress	not-accessible	The source IP address of a multicast group.
I32 hwChnlGroupCfgSourceLen	1.3.6.1.4.1.2011.5.25.181.1.15.1.1.7	Integer32	not-accessible	The mask length of a multicast source address.
VLA hwChnlGroupCfgVlanIndex	1.3.6.1.4.1.2011.5.25.181.1.15.1.1.1	VlanIdOrAny	not-accessible	The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. If both hwChnlCfgVlanIndex and hwChnlCfgVSIName are invalid, the configuration is global. The value ranges from 1 to 4095.
STR hwChnlGroupCfgVsiName	1.3.6.1.4.1.2011.5.25.181.1.15.1.1.2	DisplayString	not-accessible	The name of a VSI. If a VLAN is specified, the value is 0. If both hwChnlCfgVlanIndex and hwChnlCfgVSIName are invalid, the configuration is global.
IP hwGroupCfgGroupAddress	1.3.6.1.4.1.2011.5.25.181.1.6.1.1.9	IpAddress	not-accessible	The group address of a multicast group. In the case of MAC forwarding, the group address is the smallest of 32 IP addresses.
IP hwGroupCfgPeerAddress	1.3.6.1.4.1.2011.5.25.181.1.6.1.1.5	IpAddress	not-accessible	The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid.
VLA hwGroupCfgPortCeId	1.3.6.1.4.1.2011.5.25.181.1.6.1.1.4	VlanIdOrAny	not-accessible	The CE VID of an interface. The value ranges from 1 to 4095. The value 0 indicates that the PE VID is invalid.
NUM hwGroupCfgPortIfIndex	1.3.6.1.4.1.2011.5.25.181.1.6.1.1.2	InterfaceIndexOrZero	not-accessible	The interface index. The value 0 indicates that the interface index is invalid.
VLA hwGroupCfgPortPeId	1.3.6.1.4.1.2011.5.25.181.1.6.1.1.3	VlanIdOrAny	not-accessible	The PE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the PE VID is invalid.
HWP hwGroupCfgPortType	1.3.6.1.4.1.2011.5.25.181.1.6.1.1.1	HWPortType	not-accessible	The interface type: 1: Invalid 2: PW interface 3: L2 interface 4: Encapsulation sub-interface 5: Termination sub-interface
ROW hwGroupCfgRowStatus	1.3.6.1.4.1.2011.5.25.181.1.6.1.1.100	RowStatus	read-create	The row status.
IP hwGroupCfgSourceAddress	1.3.6.1.4.1.2011.5.25.181.1.6.1.1.10	IpAddress	not-accessible	The source IP address of a multicast group.
U32 hwGroupCfgVcOrSiteId	1.3.6.1.4.1.2011.5.25.181.1.6.1.1.6	Unsigned32	not-accessible	The VC ID or SITE ID of a PW interface.
VLA hwGroupCfgVlanIndex	1.3.6.1.4.1.2011.5.25.181.1.6.1.1.7	VlanIdOrAny	not-accessible	The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.
STR hwGroupCfgVsiName	1.3.6.1.4.1.2011.5.25.181.1.6.1.1.8	DisplayString	not-accessible	The name of a VSI. If a VLAN is specified, the value is 0.
I32 hwGroupPolicyAclNum	1.3.6.1.4.1.2011.5.25.181.1.16.1.1.3	Integer32	read-create	The number of a basic ACL. The ACL number ranges from 2000 to 3999. The default value is 0, indicating that the value is invalid.
INT hwGroupPolicyIgmpVersion	1.3.6.1.4.1.2011.5.25.181.1.16.1.1.4	INTEGER	read-create	The IGMP version. The value ranges from 0 to 3. The default is 0, indicating that no version is specified.
ROW hwGroupPolicyRowStatus	1.3.6.1.4.1.2011.5.25.181.1.16.1.1.100	RowStatus	read-create	The row status.
VLA hwGroupPolicyVlanIndex	1.3.6.1.4.1.2011.5.25.181.1.16.1.1.1	VlanIdOrAny	not-accessible	The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.
STR hwGroupPolicyVsiName	1.3.6.1.4.1.2011.5.25.181.1.16.1.1.2	DisplayString	not-accessible	The name of a VSI. If a VLAN is specified, the value is 0.
ENA hwIgmpSnoopingEnabled	1.3.6.1.4.1.2011.5.25.181.1.1.1	EnabledStatus	read-write	IGMP snooping is enabled or disabled in the global view: 1: enabled 2: disabled The default value is 2.
hwIgspMibCompliance	1.3.6.1.4.1.2011.5.25.181.100.1.1			The compliance statement for device supporting IGMP Snooping.
hwIgspMibObject	1.3.6.1.4.1.2011.5.25.181.1
hwIgspSystemInfo	1.3.6.1.4.1.2011.5.25.181.1.1
hwIgspSystemInfoGroup	1.3.6.1.4.1.2011.5.25.181.100.2.1			.
I32 hwL2mcCacTrapInterval	1.3.6.1.4.1.2011.5.25.181.1.1.4	Integer32	read-write	The CAC trap interval. The default is zero.
hwL2mcCfgEntry	1.3.6.1.4.1.2011.5.25.181.1.2.1.1		not-accessible	An entry is created for each active VLAN or VSI in the device and deleted when the VLAN or VSI becomes inactive.
hwL2mcCfgInfo	1.3.6.1.4.1.2011.5.25.181.1.2
hwL2mcCfgInfoGroup	1.3.6.1.4.1.2011.5.25.181.100.2.2			.
hwL2mcCfgTable	1.3.6.1.4.1.2011.5.25.181.1.2.1		not-accessible	This table describes the configurations of IGMP snooping in a VLAN or a VSI.
T/F hwL2mcCheckRouterAlert	1.3.6.1.4.1.2011.5.25.181.1.2.1.1.9	TruthValue	read-create	Whether to check the router-alert of a packet. The default value is False.
hwL2mcChnlCfgEntry	1.3.6.1.4.1.2011.5.25.181.1.9.1.1		not-accessible	An entry of channel is created for each VLAN or VSI in the device create an channel.
hwL2mcChnlCfgInfo	1.3.6.1.4.1.2011.5.25.181.1.9
hwL2mcChnlCfgInfoGroup	1.3.6.1.4.1.2011.5.25.181.100.2.9			.
hwL2mcChnlCfgTable	1.3.6.1.4.1.2011.5.25.181.1.9.1		not-accessible	This table describes the configurations of a channel.
hwL2mcChnlDenyCfgEntry	1.3.6.1.4.1.2011.5.25.181.1.17.1.1		not-accessible	An entry of channel deny is created for each VLAN or VSI in the device create an channel.
hwL2mcChnlDenyCfgInfo	1.3.6.1.4.1.2011.5.25.181.1.17
hwL2mcChnlDenyCfgInfoGroup	1.3.6.1.4.1.2011.5.25.181.100.2.17			.
hwL2mcChnlDenyCfgTable	1.3.6.1.4.1.2011.5.25.181.1.17.1		not-accessible	This table describes the configurations of deny unspecified group for each VLAN or VSI, or in global.
hwL2mcChnlGroupCfgEntry	1.3.6.1.4.1.2011.5.25.181.1.15.1.1		not-accessible	An entry of channel is created for each VLAN or VSI in the device create an channel.
hwL2mcChnlGroupCfgInfo	1.3.6.1.4.1.2011.5.25.181.1.15
hwL2mcChnlGroupCfgInfoGroup	1.3.6.1.4.1.2011.5.25.181.100.2.15			.
hwL2mcChnlGroupCfgTable	1.3.6.1.4.1.2011.5.25.181.1.15.1		not-accessible	This table describes the group configurations of a channel.
ENA hwL2mcEnabled	1.3.6.1.4.1.2011.5.25.181.1.2.1.1.3	EnabledStatus	read-create	Whether IGMP snooping is enabled in a VLAN or a VSI: 1:enabled 2:disabled The default value is 2.
hwL2mcFastChnlCfgEntry	1.3.6.1.4.1.2011.5.25.181.1.12.1.1		not-accessible	An entry is created for each IGMP snooping fast channel.
IP hwL2mcFastChnlCfgGroupAddress	1.3.6.1.4.1.2011.5.25.181.1.12.1.1.3	IpAddress	not-accessible	The group address of a multicast group. In the case of MAC forwarding, the group address is the smallest of 32 IP addresses.
I32 hwL2mcFastChnlCfgGroupLen	1.3.6.1.4.1.2011.5.25.181.1.12.1.1.4	Integer32	not-accessible	The mask length of a multicast group address.
hwL2mcFastChnlCfgInfo	1.3.6.1.4.1.2011.5.25.181.1.12
hwL2mcFastChnlCfgInfoGroup	1.3.6.1.4.1.2011.5.25.181.100.2.12			.
ROW hwL2mcFastChnlCfgRowStatus	1.3.6.1.4.1.2011.5.25.181.1.12.1.1.100	RowStatus	read-create	The row status.
IP hwL2mcFastChnlCfgSourceAddress	1.3.6.1.4.1.2011.5.25.181.1.12.1.1.5	IpAddress	not-accessible	The source IP address of a multicast group.
I32 hwL2mcFastChnlCfgSourceLen	1.3.6.1.4.1.2011.5.25.181.1.12.1.1.6	Integer32	not-accessible	The mask length of a multicast source address.
hwL2mcFastChnlCfgTable	1.3.6.1.4.1.2011.5.25.181.1.12.1		not-accessible	Table contains l2 multicast fast forward information for IGMP Snooping.
VLA hwL2mcFastChnlCfgVlanIndex	1.3.6.1.4.1.2011.5.25.181.1.12.1.1.1	VlanIdOrAny	not-accessible	The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.
STR hwL2mcFastChnlCfgVsiName	1.3.6.1.4.1.2011.5.25.181.1.12.1.1.2	DisplayString	not-accessible	The name of a VSI. If a VLAN is specified, the value is 0.
INT hwL2mcFwdAddressType	1.3.6.1.4.1.2011.5.25.181.1.4.1.1.11	INTEGER	read-only	The address type of an entry: 1: IP 2: MAC The default value is 1.
hwL2mcFwdEntry	1.3.6.1.4.1.2011.5.25.181.1.4.1.1		not-accessible	An entry is created for each active VLAN or VSI in the device create a forwarding table entry and delete when a forwarding table entry deleted.
IP hwL2mcFwdGroupAddress	1.3.6.1.4.1.2011.5.25.181.1.4.1.1.3	IpAddress	not-accessible	The group address of a multicast group. In the case of MAC forwarding, the group address is the smallest of 32 IP addresses.
INT hwL2mcFwdHostFlag1	1.3.6.1.4.1.2011.5.25.181.1.4.1.1.18	INTEGER	read-only	The mode to create an interface on the host: 1: static 2: dynamic 3: static and dynamic 4: invalid
INT hwL2mcFwdHostFlag2	1.3.6.1.4.1.2011.5.25.181.1.4.1.1.19	INTEGER	read-only	Whether an interface on the host is created through SSM-mapping: 1: non-mapping 2: mapping
INT hwL2mcFwdHostFlag3	1.3.6.1.4.1.2011.5.25.181.1.4.1.1.20	INTEGER	read-only	The type of an interface created on a router: 1: Interface connected to the host 2: Router interface that replicates multicast data flows
INT hwL2mcFwdHostFlag4	1.3.6.1.4.1.2011.5.25.181.1.4.1.1.21	INTEGER	read-only	Indicates (S, G) table created : 1: from port; 2: from static; 3: from both the default falue is 1
hwL2mcFwdInfo	1.3.6.1.4.1.2011.5.25.181.1.4
hwL2mcFwdInfoGroup	1.3.6.1.4.1.2011.5.25.181.100.2.4			.
INT hwL2mcFwdMode	1.3.6.1.4.1.2011.5.25.181.1.2.1.1.12	INTEGER	read-create	The forwarding mode: 1: IP 2: MAC The default value is 1.
IP hwL2mcFwdPeerAddress	1.3.6.1.4.1.2011.5.25.181.1.4.1.1.9	IpAddress	not-accessible	The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid.
VLA hwL2mcFwdPortCeId	1.3.6.1.4.1.2011.5.25.181.1.4.1.1.8	VlanIdOrAny	not-accessible	The CE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the CE VID is invalid.
NUM hwL2mcFwdPortIfIndex	1.3.6.1.4.1.2011.5.25.181.1.4.1.1.6	InterfaceIndexOrZero	not-accessible	The interface index. The value 0 indicates that the interface index is invalid.
VLA hwL2mcFwdPortPeId	1.3.6.1.4.1.2011.5.25.181.1.4.1.1.7	VlanIdOrAny	not-accessible	The PE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the PE VID is invalid.
HWP hwL2mcFwdPortType	1.3.6.1.4.1.2011.5.25.181.1.4.1.1.5	HWPortType	not-accessible	The interface type: 1: Invalid 2: PW interface 3: L2 interface 4: Encapsulation sub-interface 5: Termination sub-interface
IP hwL2mcFwdSourceAddress	1.3.6.1.4.1.2011.5.25.181.1.4.1.1.4	IpAddress	not-accessible	The source IP address of a multicast group.
hwL2mcFwdTable	1.3.6.1.4.1.2011.5.25.181.1.4.1		not-accessible	Table contains l2 multicast forward information for IGMP Snooping.
U32 hwL2mcFwdVcOrSiteId	1.3.6.1.4.1.2011.5.25.181.1.4.1.1.10	Unsigned32	not-accessible	The VC ID or SITE ID of a PW interface.
VLA hwL2mcFwdVlanIndex	1.3.6.1.4.1.2011.5.25.181.1.4.1.1.1	VlanIdOrAny	not-accessible	The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.
STR hwL2mcFwdVsiName	1.3.6.1.4.1.2011.5.25.181.1.4.1.1.2	DisplayString	not-accessible	The name of a VSI. If a VLAN is specified, the value is 0.
hwL2mcGroupCfgEntry	1.3.6.1.4.1.2011.5.25.181.1.6.1.1		not-accessible	An entry is created for each active VLAN or VSI in the device create a static group entry and delete when a static group entry deleted.
hwL2mcGroupCfgInfo	1.3.6.1.4.1.2011.5.25.181.1.6
hwL2mcGroupCfgInfoGroup	1.3.6.1.4.1.2011.5.25.181.100.2.6			.
hwL2mcGroupCfgTable	1.3.6.1.4.1.2011.5.25.181.1.6.1		not-accessible	Table contains l2 multicast static group information for IGMP Snooping.
C32 hwL2mcGroupExpires	1.3.6.1.4.1.2011.5.25.181.1.5.1.1.17	Counter32	read-only	When the group expires in the forwarding entry, that is, the aging time of the source group.
INT hwL2mcGroupFilterFlag	1.3.6.1.4.1.2011.5.25.181.1.5.1.1.18	INTEGER	read-only	The filtering mode: 1: include 2: exclude 3: invalid
IP hwL2mcGroupGroupAddress	1.3.6.1.4.1.2011.5.25.181.1.5.1.1.3	IpAddress	not-accessible	The IP address of a multicast group.
INT hwL2mcGroupHostFlag1	1.3.6.1.4.1.2011.5.25.181.1.5.1.1.19	INTEGER	read-only	The mode to create an interface on the host: 1: static 2: dynamic 3: static and dynamic 4: invalid
INT hwL2mcGroupHostFlag2	1.3.6.1.4.1.2011.5.25.181.1.5.1.1.20	INTEGER	read-only	Whether an interface on the host is created through SSM-mapping: 1: non-mapping 2: mapping
hwL2mcGroupInfo	1.3.6.1.4.1.2011.5.25.181.1.5
hwL2mcGroupInfoEntry	1.3.6.1.4.1.2011.5.25.181.1.5.1.1		not-accessible	An entry is created for each active VLAN or VSI in the device create a forwarding table entry and delete when a forwarding table entry deleted.
hwL2mcGroupInfoGroup	1.3.6.1.4.1.2011.5.25.181.100.2.5			.
hwL2mcGroupInfoTable	1.3.6.1.4.1.2011.5.25.181.1.5.1		not-accessible	Table contains l2 multicast group information for IGMP Snooping.
IP hwL2mcGroupPeerAddress	1.3.6.1.4.1.2011.5.25.181.1.5.1.1.9	IpAddress	not-accessible	The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid.
hwL2mcGroupPolicyCfgEntry	1.3.6.1.4.1.2011.5.25.181.1.16.1.1		not-accessible	An entry is created for each active VLAN or VSI in the device when a group policy added.
hwL2mcGroupPolicyCfgInfo	1.3.6.1.4.1.2011.5.25.181.1.16
hwL2mcGroupPolicyCfgInfoGroup	1.3.6.1.4.1.2011.5.25.181.100.2.16			.
hwL2mcGroupPolicyCfgTable	1.3.6.1.4.1.2011.5.25.181.1.16.1		not-accessible	In this table, you can query or configure a group policy to filter entries on a port.
VLA hwL2mcGroupPortCeId	1.3.6.1.4.1.2011.5.25.181.1.5.1.1.8	VlanIdOrAny	not-accessible	The CE VID of an interface. The value ranges from 1 to 4095. The value 0 indicates that the PE VID is invalid.
NUM hwL2mcGroupPortIfIndex	1.3.6.1.4.1.2011.5.25.181.1.5.1.1.6	InterfaceIndexOrZero	not-accessible	The interface index. The value 0 indicates that the interface index is invalid.
VLA hwL2mcGroupPortPeId	1.3.6.1.4.1.2011.5.25.181.1.5.1.1.7	VlanIdOrAny	not-accessible	The PE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the PE VID is invalid.
ROW hwL2mcGroupRowStatus	1.3.6.1.4.1.2011.5.25.181.1.5.1.1.100	RowStatus	read-only	The row status.
IP hwL2mcGroupSourceAddress	1.3.6.1.4.1.2011.5.25.181.1.5.1.1.4	IpAddress	not-accessible	The source IP address of a multicast group.
C32 hwL2mcGroupUpTime	1.3.6.1.4.1.2011.5.25.181.1.5.1.1.16	Counter32	read-only	How long the group exists in the forwarding entry.
U32 hwL2mcGroupVcOrSiteId	1.3.6.1.4.1.2011.5.25.181.1.5.1.1.10	Unsigned32	not-accessible	The VC ID or SITE ID of a PW interface.
VLA hwL2mcGroupVlanIndex	1.3.6.1.4.1.2011.5.25.181.1.5.1.1.1	VlanIdOrAny	not-accessible	The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.
STR hwL2mcGroupVsiName	1.3.6.1.4.1.2011.5.25.181.1.5.1.1.2	DisplayString	not-accessible	The name of a VSI. If a VLAN is specified, the value is 0.
T/F hwL2mcIgmpPacketClearStats	1.3.6.1.4.1.2011.5.25.181.1.3.1.1.30	TruthValue	read-write	Whether to clear the statistics of IGMP snooping. If the value is 1, it indicates that the statistics need to be cleared.
ENA hwL2mcIgmpQuerierEnable	1.3.6.1.4.1.2011.5.25.181.1.2.1.1.17	EnabledStatus	read-create	Whether the querier is enabled: 1: enabled 2: disabled The default value is 2.
ENA hwL2mcIgmpSsmMappingEnable	1.3.6.1.4.1.2011.5.25.181.1.2.1.1.18	EnabledStatus	read-create	Whether Ssm-Mapping is enabled: 1: enabled 2: disabled The default value is 2.
INT hwL2mcIgmpVersion	1.3.6.1.4.1.2011.5.25.181.1.2.1.1.11	INTEGER	read-create	The version of the IGMP packets. The value ranges from 1 to 3. The default value is 2.
I32 hwL2mcLastMemQueryInterval	1.3.6.1.4.1.2011.5.25.181.1.2.1.1.6	Integer32	read-create	The last member query interval. The value ranges from 1 to 5, in seconds. The default value is 1, in seconds.
I32 hwL2mcLimitAcl	1.3.6.1.4.1.2011.5.25.181.1.10.1.1.8	Integer32	read-create	The number of ACL for the multicast groups that do not need to be configured with CAC limit. The ACL number ranges from 2000 to 3999. The default value is 0, indicating that the number is invalid.
C32 hwL2mcLimitBandWidth	1.3.6.1.4.1.2011.5.25.181.1.10.1.1.7	Counter32	read-only	The current bandwidth.
ROW hwL2mcLimitCfgRowStatus	1.3.6.1.4.1.2011.5.25.181.1.10.1.1.100	RowStatus	read-create	The row status.
STR hwL2mcLimitChnlName	1.3.6.1.4.1.2011.5.25.181.1.10.1.1.3	DisplayString	not-accessible	The channel name.
hwL2mcLimitEntry	1.3.6.1.4.1.2011.5.25.181.1.10.1.1		not-accessible	An entry is created for each IGMP snooping CAC in a VLAN or a VSI.
C32 hwL2mcLimitEntryCnt	1.3.6.1.4.1.2011.5.25.181.1.10.1.1.5	Counter32	read-only	The number of current forwarding entries.
hwL2mcLimitInfo	1.3.6.1.4.1.2011.5.25.181.1.10
hwL2mcLimitInfoGroup	1.3.6.1.4.1.2011.5.25.181.100.2.10			.
I32 hwL2mcLimitMaxBandWidth	1.3.6.1.4.1.2011.5.25.181.1.10.1.1.6	Integer32	read-create	The maximum bandwidth. The value 0 indicates that the bandwidth is invalid.
I32 hwL2mcLimitMaxEntry	1.3.6.1.4.1.2011.5.25.181.1.10.1.1.4	Integer32	read-create	The maximum number of forwarding entries. The value 0 indicates that the number is invalid.
hwL2mcLimitTable	1.3.6.1.4.1.2011.5.25.181.1.10.1		not-accessible	This table describes the configurations of IGMP snooping CAC in a VLAN or a VSI.
VLA hwL2mcLimitVlanIndex	1.3.6.1.4.1.2011.5.25.181.1.10.1.1.1	VlanIdOrAny	not-accessible	The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 0. If both hwVlanLimitVlanIndex and hwVlanLimitVSIName are invalid, the configuration is global. The value ranges from 1 to 4095.
STR hwL2mcLimitVsiName	1.3.6.1.4.1.2011.5.25.181.1.10.1.1.2	DisplayString	not-accessible	The name of a VSI. If a VLAN is specified, the value is 0. If both hwVlanLimitVlanIndex and hwVlanLimitVSIName are invalid, the configuration is global.
I32 hwL2mcMaxQueryRespTime	1.3.6.1.4.1.2011.5.25.181.1.2.1.1.5	Integer32	read-create	The maximum response time. The value ranges from 1 to 25, in seconds. The default value is 10, in seconds.
hwL2mcMibCompliances	1.3.6.1.4.1.2011.5.25.181.100.1
hwL2mcMibConformance	1.3.6.1.4.1.2011.5.25.181.100
hwL2mcMibGroups	1.3.6.1.4.1.2011.5.25.181.100.2
hwL2mcPortGroupPolicyCfgEntry	1.3.6.1.4.1.2011.5.25.181.1.8.1.1		not-accessible	An entry is created for each active VLAN or VSI in the device when a group policy added.
hwL2mcPortGroupPolicyCfgInfo	1.3.6.1.4.1.2011.5.25.181.1.8
hwL2mcPortGroupPolicyCfgInfoGroup	1.3.6.1.4.1.2011.5.25.181.100.2.8			.
hwL2mcPortGroupPolicyCfgTable	1.3.6.1.4.1.2011.5.25.181.1.8.1		not-accessible	In this table, you can query or configure a group policy to filter entries on a port.
hwL2mcPortLimitEntry	1.3.6.1.4.1.2011.5.25.181.1.11.1.1		not-accessible	An entry is created for each IGMP snooping CAC on an interface.
hwL2mcPortLimitInfo	1.3.6.1.4.1.2011.5.25.181.1.11
hwL2mcPortLimitInfoGroup	1.3.6.1.4.1.2011.5.25.181.100.2.11			.
hwL2mcPortLimitTable	1.3.6.1.4.1.2011.5.25.181.1.11.1		not-accessible	This table describes the configurations of IGMP snooping CAC on an interface.
HWP hwL2mcPortType	1.3.6.1.4.1.2011.5.25.181.1.5.1.1.5	HWPortType	not-accessible	The interface type: 1: Invalid 2: PW interface 3: L2 interface 4: Encapsulation sub-interface 5: Termination sub-interface
I32 hwL2mcPromptLeaveAclNum	1.3.6.1.4.1.2011.5.25.181.1.2.1.1.14	Integer32	read-create	Whether the prompt leave complies with the ACL rules. The ACL number can be set. The ACL number ranges from 2000 to 3999. The default value is 0, indicating that no ACL number is set.
ENA hwL2mcPromptLeaveEnable	1.3.6.1.4.1.2011.5.25.181.1.2.1.1.13	EnabledStatus	read-create	Whether the prompt leave is enabled: 1: enabled 2: disabled The default value is 2.
C32 hwL2mcProxyGenQueryNum	1.3.6.1.4.1.2011.5.25.181.1.3.1.1.13	Counter32	read-only	The number of Query messages sent by the proxy in a VLAN or a VSI.
C32 hwL2mcProxyGroupQueryNum	1.3.6.1.4.1.2011.5.25.181.1.3.1.1.14	Counter32	read-only	The number of Query messages sent by the proxy in a VLAN or a VSI to a specified group.
C32 hwL2mcProxyGroupSourceQueryNum	1.3.6.1.4.1.2011.5.25.181.1.3.1.1.15	Counter32	read-only	The number of Query messages sent by the proxy in a VLAN or a VSI to a specified source group.
I32 hwL2mcQueryInterval	1.3.6.1.4.1.2011.5.25.181.1.2.1.1.7	Integer32	read-create	The query interval. The value ranges from 1 to 65535, in seconds. The default value is 60, in seconds.
C32 hwL2mcRecvIgmpLeaveNum	1.3.6.1.4.1.2011.5.25.181.1.3.1.1.6	Counter32	read-only	The number of IGMP Leave messages received in a VLAN or a VSI.
C32 hwL2mcRecvIgmpV1QueryNum	1.3.6.1.4.1.2011.5.25.181.1.3.1.1.7	Counter32	read-only	The number of IGMPv1 Query messages received in a VLAN or a VSI.
C32 hwL2mcRecvIgmpV1ReportNum	1.3.6.1.4.1.2011.5.25.181.1.3.1.1.3	Counter32	read-only	The number of IGMPv1 Report messages received in a VLAN or a VSI.
C32 hwL2mcRecvIgmpV2QueryNum	1.3.6.1.4.1.2011.5.25.181.1.3.1.1.8	Counter32	read-only	The number of IGMPv2 Query messages received in a VLAN or a VSI.
C32 hwL2mcRecvIgmpV2ReportNum	1.3.6.1.4.1.2011.5.25.181.1.3.1.1.4	Counter32	read-only	The number of IGMPv2 Report messages received in a VLAN or a VSI.
C32 hwL2mcRecvIgmpV3QueryNum	1.3.6.1.4.1.2011.5.25.181.1.3.1.1.9	Counter32	read-only	The number of IGMPv3 Query messages received in a VLAN or a VSI.
C32 hwL2mcRecvIgmpV3ReportNum	1.3.6.1.4.1.2011.5.25.181.1.3.1.1.5	Counter32	read-only	The number of IGMPv3 Report messages received in a VLAN or a VSI.
C32 hwL2mcRecvPimHelloNum	1.3.6.1.4.1.2011.5.25.181.1.3.1.1.10	Counter32	read-only	The number of PIM Hello messages received in a VLAN or a VSI.
ENA hwL2mcReportSuppressEnable	1.3.6.1.4.1.2011.5.25.181.1.2.1.1.16	EnabledStatus	read-create	Whether the suppression of the IGMP Report message (proxy) is enabled: 1: enabled 2: disabled The default value is 2.
I32 hwL2mcRobustCount	1.3.6.1.4.1.2011.5.25.181.1.2.1.1.8	Integer32	read-create	The robustness variable. The value ranges from 2 to 5. The default value is 2.
I32 hwL2mcRouterAgingTime	1.3.6.1.4.1.2011.5.25.181.1.2.1.1.4	Integer32	read-create	The aging time of an interface on a router. The value ranges from 1 to 1000, in seconds. The default value is 180, which router port is created by Igmp Query message. And when it is created by PIM hello messge, the default value is the time of Holdtime in the message.
VLA hwL2mcRouterPortCeId	1.3.6.1.4.1.2011.5.25.181.1.13.1.1.6	VlanIdOrAny	not-accessible	The CE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the PE VID is invalid.
hwL2mcRouterPortCfgEntry	1.3.6.1.4.1.2011.5.25.181.1.14.1.1		not-accessible	An entry is created for each IGMP snooping static router port on an interface.
hwL2mcRouterPortCfgInfo	1.3.6.1.4.1.2011.5.25.181.1.14
hwL2mcRouterPortCfgInfoGroup	1.3.6.1.4.1.2011.5.25.181.100.2.14			.
IP hwL2mcRouterPortCfgPeerAddress	1.3.6.1.4.1.2011.5.25.181.1.14.1.1.5	IpAddress	not-accessible	The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid.
VLA hwL2mcRouterPortCfgPortCeId	1.3.6.1.4.1.2011.5.25.181.1.14.1.1.4	VlanIdOrAny	not-accessible	The CE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the PE VID is invalid.
NUM hwL2mcRouterPortCfgPortIfIndex	1.3.6.1.4.1.2011.5.25.181.1.14.1.1.2	InterfaceIndexOrZero	not-accessible	The interface index. The value 0 indicates that the interface index is invalid.
VLA hwL2mcRouterPortCfgPortPeId	1.3.6.1.4.1.2011.5.25.181.1.14.1.1.3	VlanIdOrAny	not-accessible	The PE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the PE VID is invalid.
HWP hwL2mcRouterPortCfgPortType	1.3.6.1.4.1.2011.5.25.181.1.14.1.1.1	HWPortType	not-accessible	The interface type: 1: Invalid 2: PW interface 3: L2 interface 4: Encapsulation sub-interface 5: Termination sub-interface
ROW hwL2mcRouterPortCfgRowStatus	1.3.6.1.4.1.2011.5.25.181.1.14.1.1.100	RowStatus	read-create	The row status.
hwL2mcRouterPortCfgTable	1.3.6.1.4.1.2011.5.25.181.1.14.1		not-accessible	Table contains l2 multicast configuration of router port for IGMP Snooping.
U32 hwL2mcRouterPortCfgVcOrSiteId	1.3.6.1.4.1.2011.5.25.181.1.14.1.1.6	Unsigned32	not-accessible	The VC ID or SITE ID of a PW interface.
VLA hwL2mcRouterPortCfgVlanIndex	1.3.6.1.4.1.2011.5.25.181.1.14.1.1.7	VlanIdOrAny	not-accessible	The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.
STR hwL2mcRouterPortCfgVsiName	1.3.6.1.4.1.2011.5.25.181.1.14.1.1.8	DisplayString	not-accessible	The name of a VSI. If a VLAN is specified, the value is 0.
C32 hwL2mcRouterPortGroupExpires	1.3.6.1.4.1.2011.5.25.181.1.13.1.1.17	Counter32	read-only	The timeout period of the router port, that is, the aging time of the router port.
INT hwL2mcRouterPortGroupHostFlag1	1.3.6.1.4.1.2011.5.25.181.1.13.1.1.19	INTEGER	read-only	The mode to create an interface on the host: 1: static 2: dynamic 3: static and dynamic
C32 hwL2mcRouterPortGroupUpTime	1.3.6.1.4.1.2011.5.25.181.1.13.1.1.16	Counter32	read-only	How long the group exists in the forwarding entry.
NUM hwL2mcRouterPortIfIndex	1.3.6.1.4.1.2011.5.25.181.1.13.1.1.4	InterfaceIndexOrZero	not-accessible	The interface index. The value 0 indicates that the interface index is invalid.
hwL2mcRouterPortInfo	1.3.6.1.4.1.2011.5.25.181.1.13
hwL2mcRouterPortInfoEntry	1.3.6.1.4.1.2011.5.25.181.1.13.1.1		not-accessible	An entry is created for each IGMP snooping router port on an interface.
hwL2mcRouterPortInfoGroup	1.3.6.1.4.1.2011.5.25.181.100.2.13			.
hwL2mcRouterPortInfoTable	1.3.6.1.4.1.2011.5.25.181.1.13.1		not-accessible	Table contains l2 multicast router port information for IGMP Snooping.
ENA hwL2mcRouterPortLearningEnable	1.3.6.1.4.1.2011.5.25.181.1.2.1.1.15	EnabledStatus	read-create	Whether interface learning is enabled or not in a VLAN: 1: enabled 2: disabled The default value is 1.
IP hwL2mcRouterPortPeerAddress	1.3.6.1.4.1.2011.5.25.181.1.13.1.1.7	IpAddress	not-accessible	The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid.
VLA hwL2mcRouterPortPeId	1.3.6.1.4.1.2011.5.25.181.1.13.1.1.5	VlanIdOrAny	not-accessible	The PE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the PE VID is invalid.
HWP hwL2mcRouterPortType	1.3.6.1.4.1.2011.5.25.181.1.13.1.1.3	HWPortType	not-accessible	The interface type: 1: Invalid 2: PW interface 3: L2 interface 4: Encapsulation sub-interface 5: Termination sub-interface
U32 hwL2mcRouterPortVcOrSiteId	1.3.6.1.4.1.2011.5.25.181.1.13.1.1.8	Unsigned32	not-accessible	The VC ID or SITE ID of a PW interface.
VLA hwL2mcRouterPortVlanIndex	1.3.6.1.4.1.2011.5.25.181.1.13.1.1.1	VlanIdOrAny	not-accessible	The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.
STR hwL2mcRouterPortVsiName	1.3.6.1.4.1.2011.5.25.181.1.13.1.1.2	DisplayString	not-accessible	The name of a VSI. If a VLAN is specified, the value is 0.
ROW hwL2mcRowStatus	1.3.6.1.4.1.2011.5.25.181.1.2.1.1.100	RowStatus	read-create	The row status.
C32 hwL2mcSendQueryNum	1.3.6.1.4.1.2011.5.25.181.1.3.1.1.11	Counter32	read-only	The number of IGMP Query messages (the source address is 0) in a VLAN or a VSI.
C32 hwL2mcSendQuerySourceNum	1.3.6.1.4.1.2011.5.25.181.1.3.1.1.12	Counter32	read-only	The number of IGMP Query messages (the source address is not 0) in a VLAN or a VSI.
T/F hwL2mcSendRouterAlert	1.3.6.1.4.1.2011.5.25.181.1.2.1.1.10	TruthValue	read-create	Whether to send the router-alert of a packet. The default value is true.
C32 hwL2mcSourceExpires	1.3.6.1.4.1.2011.5.25.181.1.5.1.1.15	Counter32	read-only	The timeout period of the source group in the forwarding entry, that is, the aging time of the source group.
C32 hwL2mcSourceUpTime	1.3.6.1.4.1.2011.5.25.181.1.5.1.1.14	Counter32	read-only	How long the source group exists in the forwarding entry.
I32 hwL2mcSsmAclNum	1.3.6.1.4.1.2011.5.25.181.1.2.1.1.19	Integer32	read-create	That SSM complies with the ACL number. The ACL number ranges from 2000 to 2999. The default value is 0, indicating that no ACL number is set.
IP hwL2mcSsmGroupAddress	1.3.6.1.4.1.2011.5.25.181.1.7.1.1.3	IpAddress	not-accessible	The IP address of a multicast group.
I32 hwL2mcSsmGroupLen	1.3.6.1.4.1.2011.5.25.181.1.7.1.1.4	Integer32	not-accessible	The mask length of a multicast group.
IP hwL2mcSsmSourceAddress	1.3.6.1.4.1.2011.5.25.181.1.7.1.1.5	IpAddress	not-accessible	The source address of SSM-Mapping, which serves as an index of this table.
hwL2mcSsmSourceEntry	1.3.6.1.4.1.2011.5.25.181.1.7.1.1		not-accessible	An entry is created for each active VLAN or VSI in the device add an entry for SSM-Mapping.
hwL2mcSsmSourceInfo	1.3.6.1.4.1.2011.5.25.181.1.7
hwL2mcSsmSourceInfoGroup	1.3.6.1.4.1.2011.5.25.181.100.2.7			.
ROW hwL2mcSsmSourceRowStatus	1.3.6.1.4.1.2011.5.25.181.1.7.1.1.100	RowStatus	read-create	The row status.
hwL2mcSsmSourceTable	1.3.6.1.4.1.2011.5.25.181.1.7.1		not-accessible	This table contains the configuration of the source address list of SSM-Mapping.
VLA hwL2mcSsmSourceVlanIndex	1.3.6.1.4.1.2011.5.25.181.1.7.1.1.1	VlanIdOrAny	not-accessible	The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.
STR hwL2mcSsmSourceVsiName	1.3.6.1.4.1.2011.5.25.181.1.7.1.1.2	DisplayString	not-accessible	The name of a VSI. If a VLAN is specified, the value is 0.
hwL2mcStatisticsEntry	1.3.6.1.4.1.2011.5.25.181.1.3.1.1		not-accessible	An entry is created for each active VLAN or VSI in the device and deleted when the VLAN or VSI becomes inactive.
hwL2mcStatisticsInfo	1.3.6.1.4.1.2011.5.25.181.1.3
hwL2mcStatisticsInfoGroup	1.3.6.1.4.1.2011.5.25.181.100.2.3			.
hwL2mcStatisticsTable	1.3.6.1.4.1.2011.5.25.181.1.3.1		not-accessible	Table contains VLAN or VSI statistics information for IGMP Snooping.
VLA hwL2mcStatsVlanIndex	1.3.6.1.4.1.2011.5.25.181.1.3.1.1.1	VlanIdOrAny	not-accessible	The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.
STR hwL2mcStatsVsiName	1.3.6.1.4.1.2011.5.25.181.1.3.1.1.2	DisplayString	not-accessible	The name of a VSI. If a VLAN is specified, the value is 0.
VLA hwL2mcVlanIndex	1.3.6.1.4.1.2011.5.25.181.1.2.1.1.1	VlanIdOrAny	not-accessible	The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.
STR hwL2mcVsiName	1.3.6.1.4.1.2011.5.25.181.1.2.1.1.2	DisplayString	not-accessible	The name of a VSI. If a VLAN is specified, the value is 0.
hwL2MultiCastMIB	1.3.6.1.4.1.2011.5.25.181			The MIB module for IGMP Snooping feature. Internet Group Management Protocol (IGMP) is the protocol used by IPv4 end hosts to indicate their interest in receiving multicast traffic for certain multicast groups to neighboring multicast routers. IGMP Snooping is a switch protocol. A switch that implements IGMP Snooping listens to the IGMP messages exchanged between the hosts and router, then provides selective transmission of multicast traffic based on multicast mac destination address or multicast group address.
I32 hwPortGroupPolicyAclNum	1.3.6.1.4.1.2011.5.25.181.1.8.1.1.9	Integer32	read-create	The number of a basic ACL. The ACL number ranges from 2000 to 3999. The default value is 0, indicating that the value is invalid.
INT hwPortGroupPolicyIgmpVersion	1.3.6.1.4.1.2011.5.25.181.1.8.1.1.10	INTEGER	read-create	The IGMP version. The value ranges from 0 to 3. The default is 0, indicating that no version is specified.
IP hwPortGroupPolicyPeerAddress	1.3.6.1.4.1.2011.5.25.181.1.8.1.1.5	IpAddress	not-accessible	The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid.
VLA hwPortGroupPolicyPortCeId	1.3.6.1.4.1.2011.5.25.181.1.8.1.1.4	VlanIdOrAny	not-accessible	The CE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the PE VID is invalid.
NUM hwPortGroupPolicyPortIfIndex	1.3.6.1.4.1.2011.5.25.181.1.8.1.1.2	InterfaceIndexOrZero	not-accessible	The interface index. The value 0 indicates that the interface index is invalid.
VLA hwPortGroupPolicyPortPeId	1.3.6.1.4.1.2011.5.25.181.1.8.1.1.3	VlanIdOrAny	not-accessible	The PE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the PE VID is invalid.
HWP hwPortGroupPolicyPortType	1.3.6.1.4.1.2011.5.25.181.1.8.1.1.1	HWPortType	not-accessible	The interface type: 1: Invalid 2: PW interface 3: L2 interface 4: Encapsulation sub-interface 5: Termination sub-interface
ROW hwPortGroupPolicyRowStatus	1.3.6.1.4.1.2011.5.25.181.1.8.1.1.100	RowStatus	read-create	The row status.
U32 hwPortGroupPolicyVcOrSiteId	1.3.6.1.4.1.2011.5.25.181.1.8.1.1.6	Unsigned32	not-accessible	The VC ID or SITE ID of a PW interface.
VLA hwPortGroupPolicyVlanIndex	1.3.6.1.4.1.2011.5.25.181.1.8.1.1.7	VlanIdOrAny	not-accessible	The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.
STR hwPortGroupPolicyVsiName	1.3.6.1.4.1.2011.5.25.181.1.8.1.1.8	DisplayString	not-accessible	The name of a VSI. If a VLAN is specified, the value is 0.
I32 hwPortLimitAcl	1.3.6.1.4.1.2011.5.25.181.1.11.1.1.10	Integer32	read-create	The number of ACL for the multicast groups that do not need to be configured with CAC limit. The ACL number ranges from 2000 to 3999. The default value is 0, indicating that the number is invalid.
C32 hwPortLimitBandWidth	1.3.6.1.4.1.2011.5.25.181.1.11.1.1.14	Counter32	read-only	The current bandwidth.
VLA hwPortLimitCeId	1.3.6.1.4.1.2011.5.25.181.1.11.1.1.6	VlanIdOrAny	not-accessible	The CE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the PE VID is invalid.
ROW hwPortLimitCfgRowStatus	1.3.6.1.4.1.2011.5.25.181.1.11.1.1.100	RowStatus	read-create	The row status.
STR hwPortLimitChnlName	1.3.6.1.4.1.2011.5.25.181.1.11.1.1.9	DisplayString	not-accessible	The channel name.
C32 hwPortLimitEntryCnt	1.3.6.1.4.1.2011.5.25.181.1.11.1.1.12	Counter32	read-only	The number of current forwarding entries.
NUM hwPortLimitIfIndex	1.3.6.1.4.1.2011.5.25.181.1.11.1.1.4	InterfaceIndexOrZero	not-accessible	The interface index. The value 0 indicates that the interface index is invalid.
I32 hwPortLimitMaxBandWidth	1.3.6.1.4.1.2011.5.25.181.1.11.1.1.13	Integer32	read-create	The maximum bandwidth. The value 0 indicates that the bandwidth is invalid.
I32 hwPortLimitMaxEntry	1.3.6.1.4.1.2011.5.25.181.1.11.1.1.11	Integer32	read-create	The maximum number of forwarding entries. The value 0 indicates that the number is invalid.
IP hwPortLimitPeerAddress	1.3.6.1.4.1.2011.5.25.181.1.11.1.1.7	IpAddress	not-accessible	The peer IP address of a PW interface. The value 0.0.0.0 indicates that the IP address is invalid.
VLA hwPortLimitPeId	1.3.6.1.4.1.2011.5.25.181.1.11.1.1.5	VlanIdOrAny	not-accessible	The PE VID of an interface. The value ranges from 1 to 4095. The value 4095 indicates that the PE VID is invalid.
HWP hwPortLimitPortType	1.3.6.1.4.1.2011.5.25.181.1.11.1.1.3	HWPortType	not-accessible	The interface type: 1: Invalid 2: PW interface 3: L2 interface 4: Encapsulation sub-interface 5: Termination sub-interface
U32 hwPortLimitVcOrSiteId	1.3.6.1.4.1.2011.5.25.181.1.11.1.1.8	Unsigned32	not-accessible	The VC ID or SITE ID of a PW interface.
VLA hwPortLimitVlanIndex	1.3.6.1.4.1.2011.5.25.181.1.11.1.1.1	VlanIdOrAny	not-accessible	The VLAN ID, which is the configuration index in a VLAN. If a VSI is specified, the value is 4095. The value ranges from 1 to 4095.
STR hwPortLimitVsiName	1.3.6.1.4.1.2011.5.25.181.1.11.1.1.2	DisplayString	not-accessible	The name of a VSI. If a VLAN is specified, the value is 0.
ENA hwSendQueryEnabled	1.3.6.1.4.1.2011.5.25.181.1.1.2	EnabledStatus	read-write	The sending of query packets is enabled or disabled: 1: enabled 2: disabled The default value is 2. Note: Ensure that you query and configure this object after hwIgmpSnoopingEnabled is configured.
IP hwSendQuerySourceIpAddr	1.3.6.1.4.1.2011.5.25.181.1.1.3	IpAddress	read-write	The source IP addresses of the Query messages sent by a device. The value ranges from 0.0.0.1 to 223.255.255.255. The default value is 192.168.0.1.

RFC description

Manages IGMP Snooping features for selective transmission of IPv4 multicast traffic based on multicast group addresses in switches.

Start monitoring Huawei Layer 2 switch, incl. VPLS/VSI-capable (IGMP/MLD snooping) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-L2MULTICAST-MIB

What Is HUAWEI-L2MULTICAST-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description