All MIBs › HUAWEI-L2VLAN-MIB
Organization: Huawei Technologies co.,Ltd.
Last Updated: 2007-01-12
Category: Technology: VLAN, VLAN and Bridging, Vendor: Huawei
Description: Huawei Layer 2 VLAN MIB for managing VLAN creation, port membership, trunking, and VLAN service configuration on Huawei Ethernet switches.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is HUAWEI-L2VLAN-MIB?
HUAWEI-L2VLAN-MIB is a Huawei enterprise MIB (rooted under hwDatacomm/hwL2Mgmt) that manages Layer 2 VLAN functionality across Huawei's VRP-based routers and Ethernet switches, and covers considerably more than basic VLAN creation and trunking: it includes VLAN stacking/QinQ tables (hwL2VlanStackingTable, hwL2VlanQinQTable, hwL2VlanInterfaceQinQTable), VLAN mapping and translation (hwL2VlanMappingTable, hwL2VlanXlateTable, hwL2DVlanMappingTable), super-VLAN (hwSuperVlanTable), MAC-based, protocol-based, and policy-based VLAN assignment (hwL2VlanMacVlanTable, hwL2VlanProtocolVlanTable, hwL2VlanPolicyVlanTable), voice VLAN (hwL2VlanVoiceVlanPortTable), interface isolation (hwL2InterfIsolateTable), and per-VLAN/per-priority traffic statistics (hwL2VlanStatTable, hwL2IfStat8021pTable). This breadth makes it useful for monitoring not just which ports belong to which VLANs, but also advanced Carrier Ethernet features like QinQ tag stacking and dynamic VLAN assignment policies, and for pulling per-VLAN traffic counters. It depends on Q-BRIDGE-MIB and IF-MIB for VLAN and interface indexing conventions, and on HUAWEI-BASE-TRAP-MIB for its notification severity/cause objects. It is deployed on Huawei switches and routers running VRP; administrators can use the HUAWEI-L2VLAN-MIB Browser view to inspect these tables when auditing Layer 2 configuration.
IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-L2VLAN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Huawei VRP-based Ethernet switches and routers
Monitoring Examples
An operator polls hwL2VlanStackingTable and hwL2VlanQinQTable to confirm outer/inner VLAN tag mappings on a QinQ-enabled trunk port, then checks hwL2VlanStatTable for the affected VLAN; a mismatch between the configured stacking entry and observed traffic counts would indicate misconfigured tag translation causing dropped or misrouted double-tagged frames.
What Can Be Monitored
- VLAN stacking/QinQ mapping table entries
- MAC/protocol/policy-based VLAN assignment tables
- super-VLAN and sub-VLAN associations
- voice VLAN port configuration
- per-VLAN and per-priority traffic statistics
- interface isolation configuration
This MIB depends on
Related MIBs
Imported Objects
From HUAWEI-BASE-TRAP-MIB
| hwBaseTrapEventType | OBJECT-TYPE |
| hwBaseTrapProbableCause | OBJECT-TYPE |
| hwBaseTrapSeverity | OBJECT-TYPE |
From HUAWEI-MIB
| hwDatacomm | OBJECT-IDENTITY |
From IF-MIB
| InterfaceIndex | |
| ifIndex | OBJECT-TYPE |
From P-BRIDGE-MIB
| EnabledStatus |
From Q-BRIDGE-MIB
| PortList | |
| VlanId | |
| VlanIdOrNone | |
| VlanIndex |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter64 | |
| Gauge32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-IDENTITY | |
| OBJECT-TYPE | |
| TimeTicks |
From SNMPv2-TC
| MacAddress | |
| RowStatus | |
| TEXTUAL-CONVENTION |
How to Use in IPNetwork Monitor
Example using hwL2VlanSwitchMtuDiscardPkts OID:
Select a Huawei VRP-based Ethernet switch or router (VLAN/QinQ/super-VLAN management) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hwL2VlanSwitchMtuDiscardPkts into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of discard packets. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases between polls, since a rising count of errors, failures, or discards often points to a real underlying problem. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| hwL2Mgmt | 1.3.6.1.4.1.2011.5.25.42 | |||
| hwL2Vlan | 1.3.6.1.4.1.2011.5.25.42.3 | The L2Vlan MIB module is defined to manage several layer two function of Huawei Technologies co.,Ltd. | ||
| hwL2VlanMngObjects | 1.3.6.1.4.1.2011.5.25.42.3.1 | |||
| hwL2VlanBase | 1.3.6.1.4.1.2011.5.25.42.3.1.1 | |||
| hwL2VlanMIBTable | 1.3.6.1.4.1.2011.5.25.42.3.1.1.1 | not-accessible | The table contains basic information for this vlan. | |
| hwL2VlanMIBEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1 | not-accessible | Entries of vlan MIB table. | |
| VLA hwL2VlanIndex | 1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.1 | VlanId | not-accessible | The vlan-id or other identifier referring to this vlan. |
| OCT hwL2VlanDescr | 1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.2 | OCTET STRING | read-create | Description of the vlan. |
| POR hwL2VlanPortList | 1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.3 | PortList | read-create | The set of Ports which belong to the vlan. |
| INT hwL2VlanType | 1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.4 | INTEGER | read-create | Change the value from '2' to '1' indicates that the common-vlan is configured into super-vlan; Change the value from '1' to '2' indicates that the super-vlan is canceled; Change the value from '2' to '4' indicates that the common-vlan is configured into mux-vlan; Change the value from '4' to '2' indicates that the mux-vlan is canceled; Change the value from '2' to '6' indicates that the common-vlan is configured into protocol-transparent-vlan; Change the value from '6' to '2' indicates that the protocol-transparent-vlan is canceled; Note that the switch between other pairs is forbidden. |
| INT hwL2VlanUnknownUnicastProcessing | 1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.5 | INTEGER | read-create | Whether to broadcast the unknown unicast packets when ports receive it. broadcast(1) indicates broadcast the packets, discard(2) indicates it's closed. Default value is broadcast(1). |
| I32 hwL2VlanIfIndex | 1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.6 | Integer32 | read-only | Whether vlan interface is configured on vlan. If vlan interface is configured, the value of the node is InterfaceIndex, else the value is -1. |
| ENA hwL2VlanMacLearn | 1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.7 | EnabledStatus | read-create | The value indicates whether the MAC address learning is opened. The value enabled(1) indicates learning is allowed. Just the common vlan and Sub-vlan have the attribute. Default value is enabled(1). |
| ENA hwL2VlanMulticast | 1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.8 | EnabledStatus | read-only | The value enabled(1) indicates vlan Multicasting is allowed; disable(2) indicates it's closed. The default value is disable(2). |
| ENA hwL2VlanAdminStatus | 1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.9 | EnabledStatus | read-create | Value disable(2) indicates shutdown the vlan; enabled(1) indicates open the vlan. |
| ENA hwL2VlanStatisStatus | 1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.10 | EnabledStatus | read-create | The value enabled(1) indicates Statistics on vlan are allowed; disable(2) indicates aren't. The default value is disable(2). |
| INT hwL2VlanCreateStatus | 1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.11 | INTEGER | read-only | The status indicates how the vlan is created, static configured by management or created dynamicly by GVRP. |
| ROW hwL2VlanRowStatus | 1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.12 | RowStatus | read-create | Operation status. |
| ENA hwL2VlanBcast | 1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.13 | EnabledStatus | read-create | Whether to broadcast the broadcast packets when ports receive it. enabled(1) indicates broadcast the packets,disable(2) indicates it'll discard the broadcast packet. Default value is enabled(1). |
| INT hwL2VlanUnknownMulticastProcessing | 1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.14 | INTEGER | read-create | Whether to broadcast the unknown multicast packets when ports receive it. broadcast(1) indicates broadcast the packet, discard(2) indicates it'll discard the unknow multicast packet. Default value is broadcast(1). |
| INT hwL2VlanProperty | 1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.15 | INTEGER | read-only | The Property of Vlan: backboneVlan(2) used by PBT application, mutilcastVlan(3) used by Mutilcast Vlan, userVlan(4) used by users' vlan, and Default(1) means no special apply. |
| I32 hwL2VlanAgingTime | 1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.16 | Integer32 | read-create | The aging time of MAC entry that associated with the vlan.'0' means will be never aged,'-1' means aging-time is not configured to the vlan. |
| OCT hwL2VlanName | 1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.17 | OCTET STRING | read-create | Name of the vlan. |
| ENA hwL2VlanSmartMacLearn | 1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.18 | EnabledStatus | read-create | The value indicates whether the MAC address learning is opened, when the number of the port which is up state and belonging to the vlan is below and equal to two. The value enabled(1) indicates learning is not allowed, when the number of the port which is up state and belonging to the vlan is below and equal to two. Just the common vlan and Sub-vlan have the attribute. Default value is disable(0). |
| OCT hwL2VlanServiceName | 1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.19 | OCTET STRING | read-create | Service name of the vlan. |
| ENA hwL2VlanManagementVlan | 1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.20 | EnabledStatus | read-create | If the VLAN is management VLAN. |
| ENA hwL2VlanDynamicVlan | 1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.21 | EnabledStatus | read-only | If the VLAN is dynamic VLAN. |
| hwL2VlanApply | 1.3.6.1.4.1.2011.5.25.42.3.1.2 | |||
| hwL2VlanStackingTable | 1.3.6.1.4.1.2011.5.25.42.3.1.2.1 | not-accessible | QinQ-port configuration table. | |
| hwL2VlanStackingEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.2.1.1 | not-accessible | QinQ-port configuration table. | |
| I32 hwL2VlanStackingPortIndex | 1.3.6.1.4.1.2011.5.25.42.3.1.2.1.1.1 | Integer32 | not-accessible | Index number of QinQ-port. |
| VLA hwL2VlanStackingInsideVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.1.1.2 | VlanId | not-accessible | Inside vlan-id of QinQ-port, use it as the Index. |
| OCT hwL2VlanStackingOutsideVlanListLow | 1.3.6.1.4.1.2011.5.25.42.3.1.2.1.1.3 | OCTET STRING | read-create | The possible value of the outside vlan-id list. |
| OCT hwL2VlanStackingOutsideVlanListHigh | 1.3.6.1.4.1.2011.5.25.42.3.1.2.1.1.4 | OCTET STRING | read-create | The possible value of the outside vlan-id list. |
| ROW hwL2VlanStackingRowStatus | 1.3.6.1.4.1.2011.5.25.42.3.1.2.1.1.5 | RowStatus | read-create | This table can be created. |
| hwL2VlanMappingTable | 1.3.6.1.4.1.2011.5.25.42.3.1.2.2 | not-accessible | Configuration table. | |
| hwL2VlanMappingEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.2.2.1 | not-accessible | QinQ-port configuration table. | |
| I32 hwL2VlanMappingPortIndex | 1.3.6.1.4.1.2011.5.25.42.3.1.2.2.1.1 | Integer32 | not-accessible | Index number of QinQ-port. |
| VLA hwL2VlanMappingInsideVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.2.1.2 | VlanId | not-accessible | Inside vlan-id of QinQ-port ,use it as the Index. |
| OCT hwL2VlanMappingOutsideVlanListLow | 1.3.6.1.4.1.2011.5.25.42.3.1.2.2.1.3 | OCTET STRING | read-create | The possible value of the outside vlan-id list. |
| OCT hwL2VlanMappingOutsideVlanListHigh | 1.3.6.1.4.1.2011.5.25.42.3.1.2.2.1.4 | OCTET STRING | read-create | The possible value of the outside vlan-id list. |
| ROW hwL2VlanMappingRowStatus | 1.3.6.1.4.1.2011.5.25.42.3.1.2.2.1.5 | RowStatus | read-create | This table can be created. |
| hwSuperVlanTable | 1.3.6.1.4.1.2011.5.25.42.3.1.2.3 | not-accessible | The table contains configuration and control information for the super vlan. | |
| hwSuperVlanEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.2.3.1 | not-accessible | Entries of the super vlan table. | |
| VLA hwSuperVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.3.1.1 | VlanId | not-accessible | The super vlan-id. |
| OCT hwSubVlanListLow | 1.3.6.1.4.1.2011.5.25.42.3.1.2.3.1.2 | OCTET STRING | read-write | The lowest possible value of the sub vlan list on the supervlan. |
| OCT hwSubVlanListHigh | 1.3.6.1.4.1.2011.5.25.42.3.1.2.3.1.3 | OCTET STRING | read-write | The highest possible value of the sub vlan list on the supervlan. |
| hwL2InterfIsolateTable | 1.3.6.1.4.1.2011.5.25.42.3.1.2.4 | not-accessible | The table contains configuration and control information for interfaces isolate. | |
| hwL2InterfIsolateEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.2.4.1 | not-accessible | Secondary vlan lists of Isolate-vlans. | |
| VLA hwL2InterfIsolateVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.4.1.1 | VlanId | not-accessible | vlan-id. The vlan into which interf-isolate is configured. |
| OCT hwL2InterfIsolateInterflistLow | 1.3.6.1.4.1.2011.5.25.42.3.1.2.4.1.2 | OCTET STRING | read-write | The lowest possible value of Interface list on the vlan. |
| OCT hwL2InterfIsolateInterflistHigh | 1.3.6.1.4.1.2011.5.25.42.3.1.2.4.1.3 | OCTET STRING | read-write | The highest possible value of Interface list on the vlan. |
| hwL2IsolatemappingTable | 1.3.6.1.4.1.2011.5.25.42.3.1.2.5 | not-accessible | The table contains mapping information between isolated ports. | |
| hwL2IsolatemappingEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.2.5.1 | not-accessible | ||
| I32 hwL2IsolatemappingPortNum | 1.3.6.1.4.1.2011.5.25.42.3.1.2.5.1.1 | Integer32 | not-accessible | Port number. |
| OCT hwL2IsolateInterflistLow | 1.3.6.1.4.1.2011.5.25.42.3.1.2.5.1.2 | OCTET STRING | read-write | The lowest possible value of Interface list. |
| OCT hwL2IsolateInterflistHigh | 1.3.6.1.4.1.2011.5.25.42.3.1.2.5.1.3 | OCTET STRING | read-write | The highest possible value of Interface. |
| hwL2VlanStackingExtTable | 1.3.6.1.4.1.2011.5.25.42.3.1.2.6 | not-accessible | ||
| hwL2VlanStackingExtEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.2.6.1 | not-accessible | ||
| NUM hwL2VlanStackingExtPortIndex | 1.3.6.1.4.1.2011.5.25.42.3.1.2.6.1.1 | InterfaceIndex | not-accessible | Configured QinQ-Port Index. |
| VLA hwL2VlanStackingExtVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.6.1.2 | VlanIdOrNone | not-accessible | This vlan-id need be poped or pushed in interface. |
| INT hwL2VlanStackingExtAction | 1.3.6.1.4.1.2011.5.25.42.3.1.2.6.1.3 | INTEGER | not-accessible | The packet will be poped or pushed. |
| INT hwL2VlanStackingExtDirection | 1.3.6.1.4.1.2011.5.25.42.3.1.2.6.1.4 | INTEGER | not-accessible | The direction which the packet need be poped or pushed. That is, the packet is receviced or transitted. |
| OCT hwL2VlanStackingExtVlanListLow | 1.3.6.1.4.1.2011.5.25.42.3.1.2.6.1.5 | OCTET STRING | read-create | If hwL2VlanStackingBothAction is pop, the packet which has hwL2VlanStackingBothPopOrPushVlanId will be taken tag away. If hwL2VlanStackingBothAction is push, the packet will be added tag which is hwL2VlanStackingBothPopOrPushVlanId. |
| OCT hwL2VlanStackingExtVlanListHigh | 1.3.6.1.4.1.2011.5.25.42.3.1.2.6.1.6 | OCTET STRING | read-create | If hwL2VlanStackingBothAction is pop, the packet which has hwL2VlanStackingBothPopOrPushVlanId will be taken tag away. If hwL2VlanStackingBothAction is push, the packet will be added tag which is hwL2VlanStackingBothPopOrPushVlanId. |
| ROW hwL2VlanStackingExtRowStatus | 1.3.6.1.4.1.2011.5.25.42.3.1.2.6.1.7 | RowStatus | read-create | This table can be created. |
| INT hwL2VlanStackingExtPriorityMode | 1.3.6.1.4.1.2011.5.25.42.3.1.2.6.1.8 | INTEGER | read-create | The priority mode of outer VLAN, the priority can be appointed or inherit from inner VLAN's priority. |
| I32 hwL2VlanStackingExtVlan8021p | 1.3.6.1.4.1.2011.5.25.42.3.1.2.6.1.9 | Integer32 | read-create | The 8021p of outer VLAN ID after pushing, it's an optional field, its default value is 0. |
| hwL2VlanQinQTable | 1.3.6.1.4.1.2011.5.25.42.3.1.2.7 | not-accessible | The table contains global view configuration information for Flexible QinQ. | |
| hwL2VlanQinQEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.2.7.1 | not-accessible | Flexible QinQ configuration Entry. | |
| I32 hwL2VlanQinQIndex | 1.3.6.1.4.1.2011.5.25.42.3.1.2.7.1.1 | Integer32 | not-accessible | Index number of Flexible QinQ. |
| INT hwL2VlanQinQDirection | 1.3.6.1.4.1.2011.5.25.42.3.1.2.7.1.2 | INTEGER | not-accessible | Inbound or outbound direction for VPN instance. |
| VLA hwL2VlanQinQOutSideVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.7.1.3 | VlanId | read-create | Outside vlan-id for ISP. |
| ROW hwL2VlanSysQinQRowStatus | 1.3.6.1.4.1.2011.5.25.42.3.1.2.7.1.4 | RowStatus | read-create | The table contains interface view configuration information for Flexible QinQ. |
| hwL2VlanInterfaceQinQTable | 1.3.6.1.4.1.2011.5.25.42.3.1.2.8 | not-accessible | Interface view Flexible QinQ configuration table. | |
| hwL2VlanInterfaceQinQEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.2.8.1 | not-accessible | Interface view Flexible QinQ configuration entry. | |
| NUM hwL2VlanQinQInterfaceIndex | 1.3.6.1.4.1.2011.5.25.42.3.1.2.8.1.1 | InterfaceIndex | not-accessible | Interface index. |
| VLA hwL2VlanQinQCVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.8.1.2 | VlanId | not-accessible | Client vlan-id. |
| VLA hwL2VlanQinQSVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.8.1.3 | VlanId | read-create | Internet service provide vlan-id |
| INT hwL2VlanQinQAction | 1.3.6.1.4.1.2011.5.25.42.3.1.2.8.1.4 | INTEGER | read-create | Action push or nop. |
| VLA hwL2VlanQinQNewCVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.8.1.5 | VlanId | read-create | Replaced of new client vlan-id. |
| ROW hwL2VlanInterfaceQinQRowStatus | 1.3.6.1.4.1.2011.5.25.42.3.1.2.8.1.6 | RowStatus | read-create | This table can be created. |
| hwL2DVlanMappingTable | 1.3.6.1.4.1.2011.5.25.42.3.1.2.9 | not-accessible | The table contains double Vlan-Mapping. | |
| hwL2DVlanMappingEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.2.9.1 | not-accessible | The table contains double Vlan-Mapping entry. | |
| NUM hwL2DVlanMappingInterfaceIndex | 1.3.6.1.4.1.2011.5.25.42.3.1.2.9.1.1 | InterfaceIndex | not-accessible | Interface Index. |
| VLA hwL2DVlanMappingExternalVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.9.1.2 | VlanId | not-accessible | Service vlan-id. |
| VLA hwL2DVlanMappingInternalVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.9.1.3 | VlanId | not-accessible | Client vlan-id. |
| INT hwL2DVlanMappingDirection | 1.3.6.1.4.1.2011.5.25.42.3.1.2.9.1.4 | INTEGER | not-accessible | Direction inbound and outbound. |
| VLA hwL2DVlanMappingMapExternalVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.9.1.5 | VlanId | read-create | Replaced of new service vlan-id. |
| VLA hwL2DVlanMappingMapInternalVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.9.1.6 | VlanId | read-create | Replaced of new client vlan-id. |
| INT hwL2DVlanMappingAction | 1.3.6.1.4.1.2011.5.25.42.3.1.2.9.1.7 | INTEGER | read-create | Action drop, pop-externalvlan and swap. |
| ROW hwL2DVlanMappingRowStatus | 1.3.6.1.4.1.2011.5.25.42.3.1.2.9.1.8 | RowStatus | read-create | Operation status. |
| hwL2VlanMappingExtTable | 1.3.6.1.4.1.2011.5.25.42.3.1.2.10 | not-accessible | Configuration table. | |
| hwL2VlanMappingExtEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.2.10.1 | not-accessible | The table contains Vlan-Mapping entry. | |
| I32 hwL2VlanMappingExtPortIndex | 1.3.6.1.4.1.2011.5.25.42.3.1.2.10.1.1 | Integer32 | not-accessible | Port Index. |
| INT hwL2VlanMappingExtDirection | 1.3.6.1.4.1.2011.5.25.42.3.1.2.10.1.2 | INTEGER | not-accessible | Direction inbound and outbound. |
| VLA hwL2VlanMappingExtVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.10.1.3 | VlanId | not-accessible | The outside vlan-id. |
| OCT hwL2VlanMappingExtVlanListLow | 1.3.6.1.4.1.2011.5.25.42.3.1.2.10.1.4 | OCTET STRING | read-create | The possible value of the inside vlan list. |
| OCT hwL2VlanMappingExtVlanListHigh | 1.3.6.1.4.1.2011.5.25.42.3.1.2.10.1.5 | OCTET STRING | read-create | The possible value of the inside vlan list. |
| ROW hwL2VlanMappingExtRowStatus | 1.3.6.1.4.1.2011.5.25.42.3.1.2.10.1.6 | RowStatus | read-create | This table can be created. |
| INT hwL2VlanMappingExtPriorityMode | 1.3.6.1.4.1.2011.5.25.42.3.1.2.10.1.7 | INTEGER | read-create | The priority mode of outside VLAN after mapping, the priority can be appointed or inherit from inner VLAN's priority. |
| I32 hwL2VlanMappingExtVlan8021p | 1.3.6.1.4.1.2011.5.25.42.3.1.2.10.1.8 | Integer32 | read-create | The priority of outside VLAN after mapping, its default value is 0. |
| hwL2VlanStackingAdvTable | 1.3.6.1.4.1.2011.5.25.42.3.1.2.11 | not-accessible | The table of advanced vlan stacking. | |
| hwL2VlanStackingAdvEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.2.11.1 | not-accessible | The entry of advanced vlan stacking table. | |
| I32 hwL2VlanStackingAdvPortIndex | 1.3.6.1.4.1.2011.5.25.42.3.1.2.11.1.1 | Integer32 | not-accessible | The Index of L2-Switch Interface. |
| I32 hwL2VlanStackingAdvOutside8021p | 1.3.6.1.4.1.2011.5.25.42.3.1.2.11.1.2 | Integer32 | not-accessible | The 8021p value of vlan before stacked operation. |
| VLA hwL2VlanStackingAdvStackVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.11.1.3 | VlanId | not-accessible | The outer vlan-id after stacked operation. |
| I32 hwL2VlanStackingAdvStack8021p | 1.3.6.1.4.1.2011.5.25.42.3.1.2.11.1.4 | Integer32 | not-accessible | The 8021p of outer vlan-id after stacked, it's an optional field, if it is not selected, its value is 8. |
| VLA hwL2VlanStackingAdvMapVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.11.1.5 | VlanIdOrNone | not-accessible | The possible value of the inner vlan after mapped operation. |
| OCT hwL2VlanStackingAdvOutsideVlanListLow | 1.3.6.1.4.1.2011.5.25.42.3.1.2.11.1.6 | OCTET STRING | read-create | The possible value of the CE-Vlan low list. |
| OCT hwL2VlanStackingAdvOutsideVlanListHigh | 1.3.6.1.4.1.2011.5.25.42.3.1.2.11.1.7 | OCTET STRING | read-create | The possible value of the CE-Vlan high list. |
| ROW hwL2VlanStackingAdvRowStatus | 1.3.6.1.4.1.2011.5.25.42.3.1.2.11.1.8 | RowStatus | read-create | This table can be created. |
| hwL2VlanMappingAdvTable | 1.3.6.1.4.1.2011.5.25.42.3.1.2.12 | not-accessible | The table of advanced vlan mapping. | |
| hwL2VlanMappingAdvEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.2.12.1 | not-accessible | The entry of advanced vlan mapping table. | |
| I32 hwL2VlanMappingAdvPortIndex | 1.3.6.1.4.1.2011.5.25.42.3.1.2.12.1.1 | Integer32 | not-accessible | The index of L2-Switch port. |
| I32 hwL2VlanMappingAdvOutsideVlan8021p | 1.3.6.1.4.1.2011.5.25.42.3.1.2.12.1.2 | Integer32 | not-accessible | The possible value of the CE-Vlan's 802.1p. |
| VLA hwL2VlanMappingAdvMapVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.12.1.3 | VlanId | not-accessible | The mapped vlan-id, using it as the index. |
| I32 hwL2VlanMappingAdvMapVlan8021p | 1.3.6.1.4.1.2011.5.25.42.3.1.2.12.1.4 | Integer32 | not-accessible | The 8021p of outer vlan-id after mapped, it's an optional field, if it is not selected, its value is 8. |
| OCT hwL2VlanMappingAdvOutsideVlanListLow | 1.3.6.1.4.1.2011.5.25.42.3.1.2.12.1.5 | OCTET STRING | read-create | The possible value of the CE-Vlan low list |
| OCT hwL2VlanMappingAdvOutsideVlanListHigh | 1.3.6.1.4.1.2011.5.25.42.3.1.2.12.1.6 | OCTET STRING | read-create | The possible value of the CE-Vlan high list. |
| ROW hwL2VlanMappingAdvRowStatus | 1.3.6.1.4.1.2011.5.25.42.3.1.2.12.1.7 | RowStatus | read-create | This table can be created. |
| hwL2VlanSwitchTable | 1.3.6.1.4.1.2011.5.25.42.3.1.2.13 | not-accessible | The table to config the vlan switch. | |
| hwL2VlanSwitchEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1 | not-accessible | The entry of the vlan switch table. | |
| NUM hwL2VlanSwitchIfIndex | 1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.1 | InterfaceIndex | not-accessible | The interface index. |
| VLA hwL2VlanSwitchOuterVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.2 | VlanIdOrNone | not-accessible | The ID of the outer vlan tag(customer's tag). |
| VLA hwL2VlanSwitchInnerVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.3 | VlanIdOrNone | not-accessible | The ID of the inner vlan tag. |
| INT hwL2VlanSwitchMode | 1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.4 | INTEGER | read-create | The Mode of switch vlan operation, including the following case: 0 to 1, 0 to 2, 1 to 0, 1 to 1, 1 to 2, 2 to 0, 2 to 1, 2 to 2. |
| VLA hwL2VlanSwitchOuterSwitchVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.5 | VlanIdOrNone | read-create | The outer vlan-id after switched. |
| VLA hwL2VlanSwitchInnerSwitchVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.6 | VlanIdOrNone | read-create | The inner vlan-id after switched. 0 indicates it's not used. |
| I32 hwL2VlanSwitch8021pRemark | 1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.7 | Integer32 | read-create | The 8021p of outer vlan-id after switched, it's an optional field, if it is not selected, its value is 8. |
| NUM hwL2VlanSwitchOutIfIndex | 1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.8 | InterfaceIndex | read-create | The out interface index. |
| I32 hwL2VlanSwitchMtu | 1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.9 | Integer32 | read-create | The value of mtu. |
| C64 hwL2VlanSwitchMtuDiscardPktsEx | 1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.10 | Counter64 | read-only | The number of discard packets. |
| C64 hwL2VlanSwitchMtuDiscardBytes | 1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.11 | Counter64 | read-only | The number of discard bytes. |
| ENA hwL2VlanSwitchMtuResetFlag | 1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.12 | EnabledStatus | read-write | The flag of reset the discard statistics. |
| ENA hwL2VlanSwitchMtuEnableFlag | 1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.13 | EnabledStatus | read-write | The flag of enable the discard statistics. |
| ROW hwL2VlanSwitchRowStatus | 1.3.6.1.4.1.2011.5.25.42.3.1.2.13.1.14 | RowStatus | read-create | Used for controlling the creation and deletion of this row. All writable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object to 'destroy' and there are one or more entries in hwL2VlanSwitchTable pointing to the row, the agent MUST also destroy the corresponding entries in hwL2VlanSwitchTable. |
| hwL2VlanQinqVlanTransEnaTable | 1.3.6.1.4.1.2011.5.25.42.3.1.2.14 | not-accessible | The table of QinQ VLAN translation enable. | |
| hwL2VlanQinqVlanTransEnaEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.2.14.1 | not-accessible | The entry of QinQ VLAN translation enable. | |
| I32 hwL2VlanQinqVlanTransEnaPortIndex | 1.3.6.1.4.1.2011.5.25.42.3.1.2.14.1.1 | Integer32 | not-accessible | The index of L2-Switch port. |
| ENA hwL2VlanQinqVlanTransEna | 1.3.6.1.4.1.2011.5.25.42.3.1.2.14.1.2 | EnabledStatus | read-create | Enable QinQ VLAN translation. |
| ROW hwL2VlanQinqVlanTransEnaRowStatus | 1.3.6.1.4.1.2011.5.25.42.3.1.2.14.1.3 | RowStatus | read-create | This table can be created. |
| hwL2VlanQinqVlanTransMissDropTable | 1.3.6.1.4.1.2011.5.25.42.3.1.2.15 | not-accessible | The table of QinQ VLAN translation miss drop. | |
| hwL2VlanQinqVlanTransMissDropEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.2.15.1 | not-accessible | The entry of QinQ VLAN translation miss drop. | |
| I32 hwL2VlanQinqVlanTransMissDropPortIndex | 1.3.6.1.4.1.2011.5.25.42.3.1.2.15.1.1 | Integer32 | not-accessible | The index of L2-Switch port. |
| INT hwL2VlanQinqVlanTransMissDrop | 1.3.6.1.4.1.2011.5.25.42.3.1.2.15.1.2 | INTEGER | read-create | Packets are dropped when a VLAN translation miss occurs. |
| ROW hwL2VlanQinqVlanTransMissDropRowStatus | 1.3.6.1.4.1.2011.5.25.42.3.1.2.15.1.3 | RowStatus | read-create | This table can be created. |
| hwL2VlanViewMappingTable | 1.3.6.1.4.1.2011.5.25.42.3.1.2.16 | not-accessible | The table of vlan-mapping at the VLAN view. | |
| hwL2VlanViewMappingEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.2.16.1 | not-accessible | The table contains vlan-mapping at the VLAN view entry. | |
| VLA hwL2VlanViewMappingVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.16.1.1 | VlanId | not-accessible | The VLAN ID before mapping, using it as the index. |
| INT hwL2VlanViewMappingDirection | 1.3.6.1.4.1.2011.5.25.42.3.1.2.16.1.2 | INTEGER | not-accessible | Direction inbound and outbound. |
| VLA hwL2VlanViewMappingMapVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.16.1.3 | VlanId | read-create | The VLAN ID after mapping. |
| INT hwL2VlanViewMappingPriorityMode | 1.3.6.1.4.1.2011.5.25.42.3.1.2.16.1.4 | INTEGER | read-create | The priority mode: the priority can be remarked or inherit: 1: priority inherit 2: remark 8021p |
| I32 hwL2VlanViewMappingVlan8021p | 1.3.6.1.4.1.2011.5.25.42.3.1.2.16.1.5 | Integer32 | read-create | The priority after mapping, its default value is 0. |
| ROW hwL2VlanViewMappingRowStatus | 1.3.6.1.4.1.2011.5.25.42.3.1.2.16.1.6 | RowStatus | read-create | Operation status. |
| hwL2VlanStackingMaskTable | 1.3.6.1.4.1.2011.5.25.42.3.1.2.17 | not-accessible | The table of VLAN-stacking with Mask. | |
| hwL2VlanStackingMaskEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1 | not-accessible | The entry of the table of VLAN-stacking with Mask. | |
| NUM hwL2VlanStackingMaskPortIndex | 1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.1 | InterfaceIndex | not-accessible | The index of L2-Switch interface. |
| VLA hwL2VlanStackingMaskStackVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.2 | VlanIdOrNone | not-accessible | The outer VLAN-ID after stacking operation. |
| I32 hwL2VlanStackingMaskStack8021p | 1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.3 | Integer32 | not-accessible | The 8021p of outer VLAN-ID after stacking, it's an optional field, if it is not selected, its value is 8, means inherit the 8021p from inner tag. |
| INT hwL2VlanStackingMaskAction | 1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.4 | INTEGER | not-accessible | The packet will be poped or pushed. |
| INT hwL2VlanStackingMaskDirection | 1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.5 | INTEGER | not-accessible | The direction which the packet need be poped or pushed, that is ,the packet is receviced or transitted |
| OCT hwL2VlanStackingMaskVlanListLow | 1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.6 | OCTET STRING | read-create | The possible value of the CE-VLAN low list. |
| OCT hwL2VlanStackingMaskVlanListHigh | 1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.7 | OCTET STRING | read-create | The possible value of the CE-VLAN high list. |
| ROW hwL2VlanStackingMaskRowStatus | 1.3.6.1.4.1.2011.5.25.42.3.1.2.17.1.8 | RowStatus | read-create | Operation status. |
| hwL2VlanIpSubnetVlanTable | 1.3.6.1.4.1.2011.5.25.42.3.1.2.18 | not-accessible | The table of VLAN assignment based on ip subnet. | |
| hwL2VlanIpSubnetVlanEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1 | not-accessible | The entry of the table of VLAN assignment based on ip subnet. | |
| VLA hwL2VlanIpSubnetVlanVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.1 | VlanId | not-accessible | The VLAN-ID after VLAN assignment based on ip subnet. |
| I32 hwL2VlanIpSubnetVlanIpSubnetIndex | 1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.2 | Integer32 | not-accessible | The index of ip subnet on this vlan, ranging from integer 1 to 12. |
| IP hwL2VlanIpSubnetVlanIpAddress | 1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.3 | IpAddress | read-create | The IpAddress based on vlan. |
| IP hwL2VlanIpSubnetVlanIpSubnetMask | 1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.4 | IpAddress | read-create | The IpAddress or Ip subnet mask. |
| I32 hwL2VlanIpSubnetVlanPriority | 1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.5 | Integer32 | read-create | The priority after vlan assignment based on ip subnet, its default value is 0. |
| ROW hwL2VlanIpSubnetVlanRowStatus | 1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.6 | RowStatus | read-create | Operation status. |
| hwL2VlanMacVlanTable | 1.3.6.1.4.1.2011.5.25.42.3.1.2.19 | not-accessible | The table of VLAN assignment based on MAC. | |
| hwL2VlanMacVlanEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.2.19.1 | not-accessible | The entry of the table of VLAN assignment based on MAC. | |
| VLA hwL2VlanMacVlanVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.19.1.1 | VlanId | read-create | mac-vlan. |
| MAC hwL2VlanMacVlanMac | 1.3.6.1.4.1.2011.5.25.42.3.1.2.19.1.2 | MacAddress | read-create | The VLAN-ID after VLAN assignment based on mac. |
| I32 hwL2VlanMacVlanVlanPriority | 1.3.6.1.4.1.2011.5.25.42.3.1.2.19.1.3 | Integer32 | read-create | The priority after vlan assignment based on mac, its default value is 0. |
| ROW hwL2VlanMacVlanMacRowStatus | 1.3.6.1.4.1.2011.5.25.42.3.1.2.19.1.4 | RowStatus | read-create | Operation status. |
| hwL2VlanProtocolVlanTable | 1.3.6.1.4.1.2011.5.25.42.3.1.2.20 | not-accessible | The table of VLAN assignment based on protocol. | |
| hwL2VlanProtocolVlanEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.2.20.1 | not-accessible | The entry of the table of VLAN assignment based on protocol. | |
| VLA hwL2VlanProtocolVlanVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.20.1.1 | VlanId | not-accessible | The VLAN-ID after VLAN assignment based on protocol. |
| I32 hwL2VlanProtocolVlanProtocolIndex | 1.3.6.1.4.1.2011.5.25.42.3.1.2.20.1.2 | Integer32 | not-accessible | The index of protocol on vlan, ranging from integer 1 to 16 |
| I32 hwL2VlanProtocolVlanProtocolType | 1.3.6.1.4.1.2011.5.25.42.3.1.2.20.1.3 | Integer32 | read-create | Protocol type. |
| INT hwL2VlanProtocolVlanEncapType | 1.3.6.1.4.1.2011.5.25.42.3.1.2.20.1.4 | INTEGER | read-create | Encap type, include ETHERII,SNAP,LLC. |
| ROW hwL2VlanProtocolVlanRowStatus | 1.3.6.1.4.1.2011.5.25.42.3.1.2.20.1.5 | RowStatus | read-create | Operation status. |
| hwL2VlanPolicyVlanTable | 1.3.6.1.4.1.2011.5.25.42.3.1.2.21 | not-accessible | The table of VLAN assignment based on strategy. | |
| hwL2VlanPolicyVlanEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.2.21.1 | not-accessible | The entry of the table of VLAN assignment based on strategy. | |
| MAC hwL2VlanPolicyVlanMac | 1.3.6.1.4.1.2011.5.25.42.3.1.2.21.1.1 | MacAddress | read-create | Support MAC+IP and MAC+IP+PORT. |
| IP hwL2VlanPolicyVlanIp | 1.3.6.1.4.1.2011.5.25.42.3.1.2.21.1.2 | IpAddress | read-create | Support MAC+IP and MAC+IP+PORT. |
| I32 hwL2VlanPolicyVlanPort | 1.3.6.1.4.1.2011.5.25.42.3.1.2.21.1.3 | Integer32 | read-create | Support MAC+IP+PORT. |
| VLA hwL2VlanPolicyVlanVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.21.1.4 | VlanId | read-create | The VLAN-ID after VLAN assignment based on policy. |
| I32 hwL2VlanPolicyVlanVlanPriority | 1.3.6.1.4.1.2011.5.25.42.3.1.2.21.1.5 | Integer32 | read-create | The VLAN-ID after VLAN assignment based on policy. |
| ROW hwL2VlanPolicyVlanRowStatus | 1.3.6.1.4.1.2011.5.25.42.3.1.2.21.1.6 | RowStatus | read-create | Operation status. |
| I32 hwL2VlanVoiceVlanEnabledVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.22 | Integer32 | read-write | Indicates the global voice VLAN ID. Global voice VLAN is enabled if the value ranges from 1 to 4094; global voice VLAN is disabled if the value is 0. |
| I32 hwL2VlanVoiceVlanAgingTime | 1.3.6.1.4.1.2011.5.25.42.3.1.2.23 | Integer32 | read-write | Voice vlan aging time(in minute). The default value is 1440. |
| INT hwL2VlanVoiceVlanSecurityMode | 1.3.6.1.4.1.2011.5.25.42.3.1.2.24 | INTEGER | read-write | Voice vlan security mode status. |
| hwL2VlanVoiceVlanPortTable | 1.3.6.1.4.1.2011.5.25.42.3.1.2.25 | not-accessible | A list of voice vlan mode entries. | |
| hwL2VlanVoiceVlanPortEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1 | not-accessible | An entry containing voice vlan mode information, which is applicable to a voice vlan enabled interface. | |
| I32 hwL2VlanVoiceVlanPortIndex | 1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.1 | Integer32 | not-accessible | The port index on which voice vlan is enabled. |
| ENA hwL2VlanVoiceVlanPortEnable | 1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.2 | EnabledStatus | read-write | Voice VLAN enable status at port . |
| INT hwL2VlanVoiceVlanPortMode | 1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.3 | INTEGER | read-write | Voice VLAN configuration mode status, 1 for auto, 2 for manual. |
| ENA hwL2VlanVoiceVlanPortLegacy | 1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.4 | EnabledStatus | read-write | This flag is enabled. It indicates that the interworking with other vendors' equipment is enabled. |
| INT hwL2VlanVoiceVlanPortSecurityMode | 1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.5 | INTEGER | read-write | Voice VLAN configuration security mode status, 1 for security, 2 for normal. |
| hwL2VlanVoiceVlanOuiTable | 1.3.6.1.4.1.2011.5.25.42.3.1.2.26 | not-accessible | A table containing the MAC address which can be identified by voice vlan. | |
| hwL2VlanVoiceVlanOuiEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.2.26.1 | not-accessible | An entry containing the information of MAC address which can be identified by voice vlan. | |
| MAC hwL2VlanVoiceVlanOuiAddress | 1.3.6.1.4.1.2011.5.25.42.3.1.2.26.1.1 | MacAddress | not-accessible | MAC address can be identified by Voice VLAN. |
| MAC hwL2VlanVoiceVlanOuiMask | 1.3.6.1.4.1.2011.5.25.42.3.1.2.26.1.2 | MacAddress | not-accessible | The mask of MAC address. |
| OCT hwL2VlanVoiceVlanOuiDescription | 1.3.6.1.4.1.2011.5.25.42.3.1.2.26.1.3 | OCTET STRING | read-create | The description of OUI. |
| ROW hwL2VlanVoiceVlanOuiRowStatus | 1.3.6.1.4.1.2011.5.25.42.3.1.2.26.1.4 | RowStatus | read-create | Operation status. |
| hwL2VlanMappingMultiTable | 1.3.6.1.4.1.2011.5.25.42.3.1.2.27 | not-accessible | Configuration table. | |
| hwL2VlanMappingMultiEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.2.27.1 | not-accessible | The table contains Vlan-Mapping entry. | |
| I32 hwL2VlanMappingMultiPortIndex | 1.3.6.1.4.1.2011.5.25.42.3.1.2.27.1.1 | Integer32 | not-accessible | Port Index. |
| INT hwL2VlanMappingMultiDirection | 1.3.6.1.4.1.2011.5.25.42.3.1.2.27.1.2 | INTEGER | not-accessible | Direction inbound and outbound. |
| VLA hwL2VlanMappingMultiVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.27.1.3 | VlanId | not-accessible | The outside vlan-id. |
| I32 hwL2VlanMappingMultiVlan8021p | 1.3.6.1.4.1.2011.5.25.42.3.1.2.27.1.4 | Integer32 | not-accessible | The priority of outside VLAN after mapping,8 means priority-inherit. |
| OCT hwL2VlanMappingMultiVlanListLow | 1.3.6.1.4.1.2011.5.25.42.3.1.2.27.1.5 | OCTET STRING | read-create | The possible value of the inside vlan list. |
| OCT hwL2VlanMappingMultiVlanListHigh | 1.3.6.1.4.1.2011.5.25.42.3.1.2.27.1.6 | OCTET STRING | read-create | The possible value of the inside vlan list. |
| ROW hwL2VlanMappingMultiRowStatus | 1.3.6.1.4.1.2011.5.25.42.3.1.2.27.1.7 | RowStatus | read-create | This table can be created. |
| hwL2VlanMacVlanNewTable | 1.3.6.1.4.1.2011.5.25.42.3.1.2.28 | not-accessible | The table of VLAN assignment based on MAC. | |
| hwL2VlanMacVlanNewEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.2.28.1 | not-accessible | The entry of the table of VLAN assignment based on MAC. | |
| MAC hwL2VlanMacVlanNewMac | 1.3.6.1.4.1.2011.5.25.42.3.1.2.28.1.1 | MacAddress | not-accessible | The VLAN-ID after VLAN assignment based on MAC. |
| VLA hwL2VlanMacVlanNewVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.28.1.2 | VlanId | read-create | MAC-VLAN VLAN ID. |
| I32 hwL2VlanMacVlanNewVlanPriority | 1.3.6.1.4.1.2011.5.25.42.3.1.2.28.1.3 | Integer32 | read-create | The priority after VLAN assignment based on MAC, its default value is 0. |
| ROW hwL2VlanMacVlanNewMacRowStatus | 1.3.6.1.4.1.2011.5.25.42.3.1.2.28.1.4 | RowStatus | read-create | Operation status. |
| hwL2VlanProtocolVlanNewTable | 1.3.6.1.4.1.2011.5.25.42.3.1.2.29 | not-accessible | The table of VLAN assignment based on protocol. | |
| hwL2VlanProtocolVlanNewEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1 | not-accessible | The entry of the table of VLAN assignment based on protocol. | |
| VLA hwL2VlanProtocolVlanNewVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.1 | VlanId | not-accessible | The VLAN-ID after VLAN assignment based on protocol. |
| I32 hwL2VlanProtocolVlanNewProtocolIndex | 1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.2 | Integer32 | not-accessible | The index of protocol on vlan, ranging from integer 1 to 16 |
| INT hwL2VlanProtocolVlanNewProtocolType | 1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.3 | INTEGER | read-create | Protocol type. |
| OCT hwL2VlanProtocolVlanNewProtocolTypeValue | 1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.4 | OCTET STRING | read-create | The value of the configured protocol type. The relationship among hwL2VlanProtocolVlanNewProtocolType and hwL2VlanProtocolVlanNewProtocolTypeValue is as follows. |--------------------------------------------------------------------------------------------| | hwL2VlanProtocol-| | hwL2VlanProtocolVlanNewProtocolTypeValue | | VlanProtocolType | ProtocolSubType | | |------------------|------------------|------------------------------------------------------| | ipv4 | notused | Zero length string | |------------------|------------------|------------------------------------------------------| | ipv6 | notused | Zero length string | |------------------|------------------|------------------------------------------------------| | at | notused | Zero length string | |------------------|------------------|------------------------------------------------------| | ipx | ethernetii | Zero length string | | | llc | | | | raw | | | | snap | | |------------------|------------------|------------------------------------------------------| | mode-ethernetii | etype | hex string like '600', which means 0x0600. | | | | The range is [0x600..0xffff] | |------------------|------------------|------------------------------------------------------| | mode-llc | etype | the sequence of different parts is as follows. | | | | [dsap value;ssap value] | | | | Both range is [0x00..0xff] | | | | | | | | For example. Suppose value of dsap and ssap are 0x09 | | | | and 0x0a, the value is '090a' | |------------------|------------------|------------------------------------------------------| | mode-snap | etype | hex string like '600', which means 0x0600. | | | | The range is [0x600..0xffff] | |------------------|------------------|------------------------------------------------------| |
| ROW hwL2VlanProtocolVlanNewRowStatus | 1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.5 | RowStatus | read-create | Operation status. |
| hwL2VlanPolicyVlanNewTable | 1.3.6.1.4.1.2011.5.25.42.3.1.2.30 | not-accessible | The table of VLAN assignment based on strategy. | |
| hwL2VlanPolicyVlanNewEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1 | not-accessible | The entry of the table of VLAN assignment based on strategy. | |
| MAC hwL2VlanPolicyVlanNewMac | 1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.1 | MacAddress | not-accessible | Support MAC+IP and MAC+IP+PORT. |
| IP hwL2VlanPolicyVlanNewIp | 1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.2 | IpAddress | not-accessible | Support MAC+IP and MAC+IP+PORT. |
| I32 hwL2VlanPolicyVlanNewPort | 1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.3 | Integer32 | not-accessible | Support MAC+IP+PORT. |
| VLA hwL2VlanPolicyVlanNewVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.4 | VlanId | not-accessible | The VLAN-ID after VLAN assignment based on policy. |
| I32 hwL2VlanPolicyVlanNewVlanPriority | 1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.5 | Integer32 | read-create | The Priority after VLAN assignment based on policy. |
| ROW hwL2VlanPolicyVlanNewRowStatus | 1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.6 | RowStatus | read-create | Operation status. |
| hwL2VlanProtocolVlanPortNewTable | 1.3.6.1.4.1.2011.5.25.42.3.1.2.31 | not-accessible | Protocol-based VLAN port information table. hwL2VlanProtocolVlanPortNewVlanId refers to hwL2VlanProtocolVlanNewVlanId in hwL2VlanProtocolVlanNewTable. hwL2VlanProtocolVlanPortNewProtocolId refers to hwL2VlanProtocolVlanNewProtocolIndex in hwL2VlanProtocolVlanNewTable. So if the value of hwL2VlanProtocolVlanPortNewVlanId and hwL2VlanProtocolVlanPortNewProtocolId have no corresponding entry in hwL2VlanProtocolVlanNewTable, set operation for this table will fail. | |
| hwL2VlanProtocolVlanPortNewEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.2.31.1 | not-accessible | Protocol-based VLAN port information entry. | |
| I32 hwL2VlanProtocolVlanPortNewIndex | 1.3.6.1.4.1.2011.5.25.42.3.1.2.31.1.1 | Integer32 | not-accessible | The maximum number is the total number of the ports supported by device. |
| VLA hwL2VlanProtocolVlanPortNewVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.31.1.2 | VlanId | not-accessible | The protocol-based VLAN ID. |
| I32 hwL2VlanProtocolVlanPortNewProtocolIndex | 1.3.6.1.4.1.2011.5.25.42.3.1.2.31.1.3 | Integer32 | not-accessible | The protocol index. |
| I32 hwL2VlanProtocolVlanPortNewPriority | 1.3.6.1.4.1.2011.5.25.42.3.1.2.31.1.4 | Integer32 | read-create | The protocol-based VLAN priority. |
| ROW hwL2VlanProtocolVlanPortNewRowStatus | 1.3.6.1.4.1.2011.5.25.42.3.1.2.31.1.5 | RowStatus | read-create | The row status of this table. |
| hwL2VlanMultiVoiceVlanPortTable | 1.3.6.1.4.1.2011.5.25.42.3.1.2.32 | not-accessible | Voice VLAN is enabled on the port. | |
| hwL2VlanMultiVoiceVlanPortEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.2.32.1 | not-accessible | An entry containing voice VLAN mode information, which is applicable to a voice VLAN enabled interface. | |
| NUM hwL2VlanMultiVoiceVlanIfIndex | 1.3.6.1.4.1.2011.5.25.42.3.1.2.32.1.1 | InterfaceIndex | not-accessible | The interface index on which voice VLAN is enabled. |
| VLA hwL2VlanMultiVoiceVlanPortVLanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.32.1.2 | VlanId | read-create | The VLAN ID of voice VLAN on port . |
| ROW hwL2VlanMultiVoiceVlanPortRowStatus | 1.3.6.1.4.1.2011.5.25.42.3.1.2.32.1.51 | RowStatus | read-create | The row status of this table. |
| hwL2VlanSwitchExtTable | 1.3.6.1.4.1.2011.5.25.42.3.1.2.33 | not-accessible | The table to config the vlan switch. | |
| hwL2VlanSwitchExtEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1 | not-accessible | The entry of the vlan switch table. | |
| OCT hwL2VlanSwitchExtName | 1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.1 | OCTET STRING | not-accessible | The vlan switch name. |
| NUM hwL2VlanSwitchExtSrcIfIndex | 1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.2 | InterfaceIndex | read-create | The index of source interface. |
| I32 hwL2VlanSwitchExtOuterVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.3 | Integer32 | read-create | The outer vlan. |
| OCT hwL2VlanSwitchExtVlanListLow | 1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.4 | OCTET STRING | read-create | The possible value of the inside vlan list. |
| OCT hwL2VlanSwitchExtVlanListHigh | 1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.5 | OCTET STRING | read-create | The possible value of the inside vlan list. |
| NUM hwL2VlanSwitchExtDstIfIndex | 1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.6 | InterfaceIndex | read-create | The index of destination interface. |
| INT hwL2VlanSwitchExtVlanXlateAction | 1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.7 | INTEGER | read-create | The action type of vlan: 1 : unchange vlan, 2 : switch vlan, 3 : push vlan. |
| I32 hwL2VlanSwitchExtDstVlan | 1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.8 | Integer32 | read-create | The outer vlan of destination. |
| I32 hwL2VlanSwitchExtDstInnerVlan | 1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.9 | Integer32 | read-create | The inner vlan of destination. |
| I32 hwL2VlanSwitchExtRemark | 1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.10 | Integer32 | read-create | The remark 8021p value. |
| I32 hwL2VlanSwitchExtRemarkReverse | 1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.11 | Integer32 | read-create | The reverse remark 8021p value. |
| INT hwL2VlanSwitchExtLinkStatus | 1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.12 | INTEGER | read-only | The link status of vlan switch. |
| ROW hwL2VlanSwitchExtRowStatus | 1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.51 | RowStatus | read-create | The row status. |
| INT hwL2VlanPrecedence | 1.3.6.1.4.1.2011.5.25.42.3.1.2.34 | INTEGER | read-write | Determine whether to select the MAC-based VLAN or subnet-based VLAN, 1:MAC VLAN(default); 2:IPSUBNET VLAN. |
| hwL2VlanXlateTable | 1.3.6.1.4.1.2011.5.25.42.3.1.2.35 | not-accessible | VLAN mapping configuration table. | |
| hwL2VlanXlateEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1 | not-accessible | The entry in the VLAN mapping configuration table. | |
| NUM hwL2VlanXlateInterfaceIndex | 1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.1 | InterfaceIndex | not-accessible | The index of the interface. |
| VLA hwL2VlanXlateVlanIdBegin | 1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.2 | VlanId | not-accessible | The ID of the first VLAN (VLAN ID in the inner VLAN tag if there are double VLAN tags) at the user side. |
| VLA hwL2VlanXlateVlanIdEnd | 1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.3 | VlanIdOrNone | read-create | The ID of the end VLAN (VLAN ID in the inner VLAN tag if there are double VLAN tags) at the user side. |
| VLA hwL2VlanXlateOuterVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.4 | VlanIdOrNone | not-accessible | The value of outer VLAN for packets with double tags in customer side. For one-tag-packet, it's 0. |
| I32 hwL2VlanXlateVlan8021p | 1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.5 | Integer32 | not-accessible | The priority of the packet in customer side. |
| INT hwL2VlanXlateDirection | 1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.6 | INTEGER | not-accessible | Direction inbound or outbound or both. |
| INT hwL2VlanXlateAction | 1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.7 | INTEGER | read-create | The packet will be mapped or stacked or poped. |
| VLA hwL2VlanXlateToVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.8 | VlanIdOrNone | read-create | The ID of the outer VLAN at the network side. If this VLAN is not in use, the ID is 0. |
| VLA hwL2VlanXlateToinnerVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.9 | VlanIdOrNone | read-create | The value of inner VLAN in network side. It's 0 when it is not used. |
| I32 hwL2VlanXlateremark | 1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.10 | Integer32 | read-create | The priority of outer VLAN in network side. |
| ROW hwL2VlanXlateRowStatus | 1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.51 | RowStatus | read-create | Operation status. |
| hwL2QinQVlanTable | 1.3.6.1.4.1.2011.5.25.42.3.1.2.36 | not-accessible | The table of QinQ-VLAN configuration. | |
| hwL2QinQVlanEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1 | not-accessible | The entry of QinQ-VLAN table. | |
| NUM hwL2QinQVlanIfIndex | 1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.1 | InterfaceIndex | not-accessible | The index number of QinQ-VLAN port. |
| VLA hwL2QinQVlanIdBegin | 1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.2 | VlanId | not-accessible | The begin VLAN ID of outside. |
| VLA hwL2QinQVlanIdEnd | 1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.3 | VlanId | not-accessible | The end VLAN ID of outside. |
| VLA hwL2QinQVlanInnerVlanIdBegin | 1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.4 | VlanIdOrNone | not-accessible | The begin VLAN ID of inside. |
| VLA hwL2QinQVlanInnerVlanIdEnd | 1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.5 | VlanIdOrNone | not-accessible | The end VLAN ID of inside. |
| I32 hwL2QinQVlan8021pBegin | 1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.6 | Integer32 | not-accessible | The begin number of 8021p. |
| I32 hwL2QinQVlan8021pEnd | 1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.7 | Integer32 | not-accessible | The end number of 8021p. |
| I32 hwL2QinQVlanEtherType | 1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.8 | Integer32 | not-accessible | The value of Ethernet Type. |
| INT hwL2QinQVlanMode | 1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.9 | INTEGER | read-create | The mode of QinQ-VLAN configuration. |
| VLA hwL2QinQVlanChangedVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.10 | VlanId | read-create | The changed VLAN ID of outside. |
| VLA hwL2QinQVlanChangedInnerVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.11 | VlanIdOrNone | read-create | The changed VLAN ID of inside. |
| I32 hwL2QinQVlanRemark | 1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.12 | Integer32 | read-create | The remark number of outside 8021p.If the value is 8, the priority in the outer tag is not changed. |
| VLA hwL2QinQVlanMapStackVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.13 | VlanIdOrNone | read-create | The map VLAN ID for inside after stacking action. |
| ROW hwL2QinQVlanRowStatus | 1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.14 | RowStatus | read-create | This table can read, create and delete. |
| hwL2UntagAddDTagTable | 1.3.6.1.4.1.2011.5.25.42.3.1.2.37 | not-accessible | The table of untagged VLAN add double tagged VLAN configuration. | |
| hwL2UntagAddDTagEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.2.37.1 | not-accessible | The entry of untagged VLAN add double tagged VLAN table. | |
| I32 hwL2UntagAddDTagPortIndex | 1.3.6.1.4.1.2011.5.25.42.3.1.2.37.1.1 | Integer32 | not-accessible | The port index number of interface. |
| VLA hwL2UntagAddDTagOuterVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.37.1.2 | VlanId | read-create | The outer VLAN ID. |
| VLA hwL2UntagAddDTagInnerVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.2.37.1.3 | VlanId | read-create | The inner VLAN ID. |
| ROW hwL2UntagAddDTagRowStatus | 1.3.6.1.4.1.2011.5.25.42.3.1.2.37.1.4 | RowStatus | read-create | This table can read, create and delete. |
| I32 hwL2VlanVoiceVlan8021p | 1.3.6.1.4.1.2011.5.25.42.3.1.2.38 | Integer32 | read-write | It indicates the IEEE 802.1Q priority of the voice VLAN and the default value is 6. |
| I32 hwL2VlanVoiceVlanDscp | 1.3.6.1.4.1.2011.5.25.42.3.1.2.39 | Integer32 | read-write | It indicates the Differentiated Services CodePoint priority of the voice VLAN and the default value is 0x2e. |
| hwL2VlanStatistics | 1.3.6.1.4.1.2011.5.25.42.3.1.3 | |||
| hwL2IfStatVlanCfgTable | 1.3.6.1.4.1.2011.5.25.42.3.1.3.1 | not-accessible | The table contains statistics enable configuration for the port and vlan. | |
| hwL2IfStatVlanCfgEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.3.1.1 | not-accessible | Entries of vlan and port statistics enable table. | |
| I32 hwL2IfStatVlanCfgPortIndex | 1.3.6.1.4.1.2011.5.25.42.3.1.3.1.1.1 | Integer32 | not-accessible | The virtual index of L2 Interface. |
| VLA hwL2IfStatVlanCfgVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.3.1.1.2 | VlanId | not-accessible | The vlan-id of packets'tag that's received or sent out from the port. |
| ENA hwL2IfStatVlanCfgEnableFlag | 1.3.6.1.4.1.2011.5.25.42.3.1.3.1.1.11 | EnabledStatus | read-create | The flag of enable the statistic function based on vlan in the interface. |
| ROW hwL2IfStatVlanCfgRowStatus | 1.3.6.1.4.1.2011.5.25.42.3.1.3.1.1.12 | RowStatus | read-create | Used for controlling the creation and deletion of this row. All writable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object to 'destroy' and there are one or more entries in hwL2IfStatVlanCfgTable pointing to the row, the agent MUST also destroy the corresponding entries in hwL2IfStatVlanCfgTable. |
| hwL2IfStat8021pCfgTable | 1.3.6.1.4.1.2011.5.25.42.3.1.3.2 | not-accessible | The table contains statistics enable for the port and 8021p. | |
| hwL2IfStat8021pCfgEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.3.2.1 | not-accessible | Entries of port and 8021p statistics enable table. | |
| I32 hwL2IfStat8021pCfgPortIndex | 1.3.6.1.4.1.2011.5.25.42.3.1.3.2.1.1 | Integer32 | not-accessible | The virtual index of L2 Interface. |
| I32 hwL2IfStat8021pCfg8021p | 1.3.6.1.4.1.2011.5.25.42.3.1.3.2.1.2 | Integer32 | not-accessible | The 8021p of packet's tag that's received or sent from the port. |
| ENA hwL2IfStat8021pCfgEnableFlag | 1.3.6.1.4.1.2011.5.25.42.3.1.3.2.1.11 | EnabledStatus | read-create | The flag of enable the static function based on 8021p in the interface. |
| ROW hwL2IfStat8021pCfgRowStatus | 1.3.6.1.4.1.2011.5.25.42.3.1.3.2.1.12 | RowStatus | read-create | Used for controlling the creation and deletion of this row. All writable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object to 'destroy' and there are one or more entries in hwL2IfStat8021pCfgTable pointing to the row, the agent MUST also destroy the corresponding entries in hwL2IfStat8021pCfgTable. |
| hwL2IfStat8021pAndVlanCfgTable | 1.3.6.1.4.1.2011.5.25.42.3.1.3.3 | not-accessible | The table contains statistics enable for the port, vlan and 8021p. | |
| hwL2IfStat8021pAndVlanCfgEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.3.3.1 | not-accessible | Entries of port, 8021p and vlan statistics enable table. | |
| I32 hwL2IfStat8021pAndVlanCfgPortIndex | 1.3.6.1.4.1.2011.5.25.42.3.1.3.3.1.1 | Integer32 | not-accessible | The virtual index of L2 Interface. |
| VLA hwL2IfStat8021pAndVlanCfgVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.3.3.1.2 | VlanId | not-accessible | The vlan-id of packet's tag that's received or sent out from the port. |
| I32 hwL2IfStat8021pAndVlanCfg8021p | 1.3.6.1.4.1.2011.5.25.42.3.1.3.3.1.3 | Integer32 | not-accessible | The 8021p value of packet's tag that's received or sent from the port. |
| ENA hwL2IfStat8021pAndVlanCfgEnableFlag | 1.3.6.1.4.1.2011.5.25.42.3.1.3.3.1.11 | EnabledStatus | read-create | The Flag of enable the static function based on vlan-id and 8021p in the interface. |
| ROW hwL2IfStat8021pAndVlanCfgRowStatus | 1.3.6.1.4.1.2011.5.25.42.3.1.3.3.1.12 | RowStatus | read-create | Used for controlling the creation and deletion of this row. All writable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object to 'destroy' and there are one or more entries in hwL2IfStat8021pAndVlanCfgTable pointing to the row, the agent MUST also destroy the corresponding entries in hwL2IfStat8021pAndVlanCfgTable. |
| hwL2VlanStatTable | 1.3.6.1.4.1.2011.5.25.42.3.1.3.4 | not-accessible | The table contains statistics information for the vlan. | |
| hwL2VlanStatEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1 | not-accessible | Entries of vlan statistics table. | |
| VLA hwL2VlanStatVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.1 | VlanId | not-accessible | The vlan-id. |
| C64 hwL2VlanStatInTotalPkts | 1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.2 | Counter64 | read-only | The number of received packets. |
| C64 hwL2VlanStatInTotalBytes | 1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.3 | Counter64 | read-only | The byte number of received packets. |
| C64 hwL2VlanStatOutTotalPkts | 1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.4 | Counter64 | read-only | The number of sent packets. |
| C64 hwL2VlanStatOutTotalBytes | 1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.5 | Counter64 | read-only | The byte number of sent packets. |
| C64 hwL2VlanStatUnknownUcastDiscardPkts | 1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.6 | Counter64 | read-only | The number of aborted unknown unicast packets. |
| C64 hwL2VlanStatUnknownMcastDiscardPkts | 1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.7 | Counter64 | read-only | The number of aborted unknown multicast packets. |
| C64 hwL2VlanStatBcastDiscardPkts | 1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.8 | Counter64 | read-only | The number of aborted broadcast packets. |
| C64 hwL2VlanStatInUcastPkts | 1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.9 | Counter64 | read-only | The number of received unicast packets. |
| C64 hwL2VlanStatInUcastBytes | 1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.10 | Counter64 | read-only | The number of received unicast packets' bytes. |
| C64 hwL2VlanStatOutUcastPkts | 1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.11 | Counter64 | read-only | The number of sent unicast packets. |
| C64 hwL2VlanStatOutUcastBytes | 1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.12 | Counter64 | read-only | The number of sent unicast packets' bytes. |
| C64 hwL2VlanStatInMcastPkts | 1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.13 | Counter64 | read-only | The number of received multicast packets. |
| C64 hwL2VlanStatInMcastBytes | 1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.14 | Counter64 | read-only | The number of received multicast packets' bytes. |
| C64 hwL2VlanStatOutMcastPkts | 1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.15 | Counter64 | read-only | The number of sent multicast packets. |
| C64 hwL2VlanStatOutMcastBytes | 1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.16 | Counter64 | read-only | The number of sent multicast packets' bytes. |
| C64 hwL2VlanStatInBcastPkts | 1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.17 | Counter64 | read-only | The number of received broadcast packets. |
| C64 hwL2VlanStatInBcastBytes | 1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.18 | Counter64 | read-only | The number of received broadcast packets' bytes. |
| C64 hwL2VlanStatOutBcastPkts | 1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.19 | Counter64 | read-only | The number of sent broadcast packets. |
| C64 hwL2VlanStatOutBcastBytes | 1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.20 | Counter64 | read-only | The number of sent broadcast packets. |
| ENA hwL2VlanStatResetFlag | 1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.21 | EnabledStatus | read-write | The flag of reset. |
| hwL2IfStatVlanTable | 1.3.6.1.4.1.2011.5.25.42.3.1.3.5 | not-accessible | The table contains statistics information for the port and vlan. | |
| hwL2IfStatVlanEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1 | not-accessible | Entries of vlan and port statistics table. | |
| I32 hwL2IfStatVlanPortIndex | 1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.1 | Integer32 | not-accessible | The virtual Index of L2 Interface. |
| VLA hwL2IfStatVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.2 | VlanId | not-accessible | The vlan-id of packets'tag that's received or sent out from the port. |
| C64 hwL2IfStatVlanInTotalPkts | 1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.3 | Counter64 | read-only | The number of received packets. |
| C64 hwL2IfStatVlanInTotalBytes | 1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.4 | Counter64 | read-only | The bytes of received packets. |
| C64 hwL2IfStatVlanOutTotalPkts | 1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.5 | Counter64 | read-only | The number of sent packets. |
| C64 hwL2IfStatVlanOutTotalBytes | 1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.6 | Counter64 | read-only | The bytes of sent packets. |
| G32 hwL2IfStatVlanInPktsRate | 1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.7 | Gauge32 | read-only | The rate of received packets. |
| G32 hwL2IfStatVlanInBytesRate | 1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.8 | Gauge32 | read-only | The rate of received bytes. |
| G32 hwL2IfStatVlanOutPktsRate | 1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.9 | Gauge32 | read-only | The rate of sent packet. |
| G32 hwL2IfStatVlanOutBytesRate | 1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.10 | Gauge32 | read-only | The rate of sent bytes. |
| C64 hwL2IfStatVlanInUcastPkts | 1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.11 | Counter64 | read-only | The number of unicast packets received. |
| C64 hwL2IfStatVlanInUcastBytes | 1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.12 | Counter64 | read-only | The number of unicast bytes received. |
| C64 hwL2IfStatVlanOutUcastPkts | 1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.13 | Counter64 | read-only | The packet number of unicast packets sent. |
| C64 hwL2IfStatVlanOutUcastBytes | 1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.14 | Counter64 | read-only | The number of unicast bytes sent. |
| C64 hwL2IfStatVlanInMcastPkts | 1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.15 | Counter64 | read-only | The number of multicast packets received. |
| C64 hwL2IfStatVlanInMcastBytes | 1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.16 | Counter64 | read-only | The number of multicast bytes received. |
| C64 hwL2IfStatVlanOutMcastPkts | 1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.17 | Counter64 | read-only | The number of multicast packets sent. |
| C64 hwL2IfStatVlanOutMcastBytes | 1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.18 | Counter64 | read-only | The number of multicast bytes sent. |
| C64 hwL2IfStatVlanInBcastPkts | 1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.19 | Counter64 | read-only | The number of broadcast packets received. |
| C64 hwL2IfStatVlanInBcastBytes | 1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.20 | Counter64 | read-only | The number of broadcast bytes received. |
| C64 hwL2IfStatVlanOutBcastPkts | 1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.21 | Counter64 | read-only | The number of broadcast packets sent. |
| C64 hwL2IfStatVlanOutBcastBytes | 1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.22 | Counter64 | read-only | The number of broadcast bytes sent. |
| ENA hwL2IfStatVlanResetFlag | 1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.23 | EnabledStatus | read-write | The flag of reset the statistic counter. |
| hwL2IfStat8021pTable | 1.3.6.1.4.1.2011.5.25.42.3.1.3.6 | not-accessible | The table contains statistics information for the port and 8021p. | |
| hwL2IfStat8021pEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1 | not-accessible | Entries of port and 8021p statistics table. | |
| I32 hwL2IfStat8021pPortIndex | 1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.1 | Integer32 | not-accessible | The virtual index of L2 Interface. |
| I32 hwL2IfStat8021p | 1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.2 | Integer32 | not-accessible | The priority of the packet's tag. |
| C64 hwL2IfStat8021pInTotalPkts | 1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.3 | Counter64 | read-only | The number of received packets. |
| C64 hwL2IfStat8021pInTotalBytes | 1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.4 | Counter64 | read-only | The bytes of received packets. |
| C64 hwL2IfStat8021pOutTotalPkts | 1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.5 | Counter64 | read-only | The number of sent packets. |
| C64 hwL2IfStat8021pOutTotalBytes | 1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.6 | Counter64 | read-only | The bytes of sent packets. |
| G32 hwL2IfStat8021pInPktsRate | 1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.7 | Gauge32 | read-only | The rate of received packets. |
| G32 hwL2IfStat8021pInBytsRate | 1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.8 | Gauge32 | read-only | The rate of received bytes. |
| G32 hwL2IfStat8021pOutPktsRate | 1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.9 | Gauge32 | read-only | The rate of the sent packets. |
| G32 hwL2IfStat8021pOutBytesRate | 1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.10 | Gauge32 | read-only | The rate of sent bytes. |
| ENA hwL2IfStat8021pResetFlag | 1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.11 | EnabledStatus | read-write | The flag of reset the statistic counter. |
| hwL2IfStat8021pAndVlanTable | 1.3.6.1.4.1.2011.5.25.42.3.1.3.7 | not-accessible | The table contains statistics information for the port ,8021p and vlan-id. | |
| hwL2IfStat8021pAndVlanEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.3.7.1 | not-accessible | Entries of port statistics table based on 8021p and vlan-id fields. | |
| I32 hwL2IfStat8021pAndVlanPortIndex | 1.3.6.1.4.1.2011.5.25.42.3.1.3.7.1.1 | Integer32 | not-accessible | The virtual Index of L2 Interface. |
| VLA hwL2IfStat8021pAndVlanVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.3.7.1.2 | VlanId | not-accessible | Vlan-id. |
| I32 hwL2IfStat8021pAndVlan8021p | 1.3.6.1.4.1.2011.5.25.42.3.1.3.7.1.3 | Integer32 | not-accessible | The priority in the 8021p packets'tag. |
| C64 hwL2IfStat8021pAndVlanInTotalPkts | 1.3.6.1.4.1.2011.5.25.42.3.1.3.7.1.4 | Counter64 | read-only | The number of received packets. |
| C64 hwL2IfStat8021pAndVlanInTotalBytes | 1.3.6.1.4.1.2011.5.25.42.3.1.3.7.1.5 | Counter64 | read-only | The bytes of received packets. |
| G32 hwL2IfStat8021pAndVlanInPktsRate | 1.3.6.1.4.1.2011.5.25.42.3.1.3.7.1.6 | Gauge32 | read-only | The rate of received packets. |
| G32 hwL2IfStat8021pAndVlanInBytsRate | 1.3.6.1.4.1.2011.5.25.42.3.1.3.7.1.7 | Gauge32 | read-only | The rate of received bytes. |
| ENA hwL2IfStat8021pAndVlanResetFlag | 1.3.6.1.4.1.2011.5.25.42.3.1.3.7.1.8 | EnabledStatus | read-write | The flag of reset statistic counters. |
| hwL2VlanSwitchPSTable | 1.3.6.1.4.1.2011.5.25.42.3.1.3.8 | not-accessible | The table to config the vlan switch by Port+SVlan index. | |
| hwL2VlanSwitchPSEntry | 1.3.6.1.4.1.2011.5.25.42.3.1.3.8.1 | not-accessible | The entry of the vlan switch IfIndex+SVlan table. | |
| NUM hwL2VlanSwitchPSIfIndex | 1.3.6.1.4.1.2011.5.25.42.3.1.3.8.1.1 | InterfaceIndex | not-accessible | The interface index. |
| I32 hwL2VlanSwitchPSSVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.3.8.1.2 | Integer32 | not-accessible | Vlan-id. |
| I32 hwL2VlanSwitchPSCVlanId | 1.3.6.1.4.1.2011.5.25.42.3.1.3.8.1.3 | Integer32 | not-accessible | CVlan-id. |
| C64 hwL2VlanSwitchPSInputPkts | 1.3.6.1.4.1.2011.5.25.42.3.1.3.8.1.4 | Counter64 | read-only | The number of inbound discard packets. |
| C64 hwL2VlanSwitchPSInputBytes | 1.3.6.1.4.1.2011.5.25.42.3.1.3.8.1.5 | Counter64 | read-only | The number of inbound discard bytes. |
| C64 hwL2VlanSwitchPSOutputPkts | 1.3.6.1.4.1.2011.5.25.42.3.1.3.8.1.6 | Counter64 | read-only | The number of outbound discard packets. |
| C64 hwL2VlanSwitchPSOutputBytes | 1.3.6.1.4.1.2011.5.25.42.3.1.3.8.1.7 | Counter64 | read-only | The number of outbound discard bytes. |
| ENA hwL2VlanSwitchPSResetFlag | 1.3.6.1.4.1.2011.5.25.42.3.1.3.8.1.8 | EnabledStatus | read-write | The flag of reset statistics. |
| ENA hwL2VlanSwitchPSEnableFlag | 1.3.6.1.4.1.2011.5.25.42.3.1.3.8.1.9 | EnabledStatus | read-write | The flag of enable statistics. |
| hwL2VlanTraps | 1.3.6.1.4.1.2011.5.25.42.3.1.4 | |||
| NTF hwL2VlanUnkownPacketAlarm | 1.3.6.1.4.1.2011.5.25.42.3.1.4.1 | Warning of unkown Packets in vlan. | ||
| hwL2vlanConformance | 1.3.6.1.4.1.2011.5.25.42.3.2 | |||
| hwL2vlanGroups | 1.3.6.1.4.1.2011.5.25.42.3.2.1 | |||
| hwL2VlanMIBTableGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.1 | A collection of objects providing device level control and status information for the Virtual LAN bridge services. | ||
| hwL2vlanStackingGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.2 | A collection of objects providing l2vlan stacking service. | ||
| hwL2vlanMappingGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.3 | A collection of objects providing l2vlan mapping service. | ||
| hwSupervlanGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.4 | A collection of objects providing supervlan service. | ||
| hwL2InterfIsolateGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.5 | A collection of objects provding l2interfisolate service. | ||
| hwL2IsolatemappingGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.6 | A collection of objects provding enhanced l2isolate service. | ||
| hwL2VlanStackingExtGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.7 | A collection of objects providing flexible QinQ service. | ||
| hwL2vlanQinQGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.8 | A collection of objects providing l2vlan QinQ service. | ||
| hwL2vlanQinQInterfaceGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.9 | A collection of objects providing l2vlan QinQ service. | ||
| hwL2DVlanMappingGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.10 | A collection of objects providing double Vlan-Mapping service. | ||
| hwL2VlanStackingAdvGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.11 | A collection of objects vlan Stacking 8021p. | ||
| hwL2VlanMappingAdvGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.12 | A collection of objects Vlan-Mapping 8021p. | ||
| hwL2VlanSwitchGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.13 | A collection of hwL2VlanSwitchTable objects. | ||
| hwL2IfStatVlanCfgGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.14 | A collection of objects enable the vlan statistic funtion in the port. | ||
| hwL2IfStat8021pCfgGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.15 | A collection of objects enable the 8021p statistic funtion in the port. | ||
| hwL2IfStat8021pAndVlanCfgGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.16 | A collection of objects enable the 8021p and vlan statistic funtion in the port. | ||
| hwL2VlanStatGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.17 | A collection of objects vlan statistic in the port. | ||
| hwL2IfStatVlanGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.18 | A collection of objects vlan statistic in the port. | ||
| hwL2IfStat8021pGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.19 | A collection of objects 8021p statistic in the port. | ||
| hwL2IfStat8021pAndVlanGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.20 | A collection of objects vlan and 8021p statistic in the port. | ||
| hwL2VlanMappingExtGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.21 | A collection of objects VLAN Mapping in the port. | ||
| hwL2VlanQinqVlanTransEnaGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.22 | A collection of objects QinQ VLAN translation enable in the port. | ||
| hwL2VlanQinqVlanTransMissDropGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.23 | A collection of objects QinQ VLAN translation miss drop in the port. | ||
| hwL2VlanViewMappingGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.24 | A collection of objects VLAN Mapping at the VLAN view. | ||
| hwL2VlanStackingMaskGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.25 | A collection of hwL2VlanStackingMaskTable objects. | ||
| hwL2VlanIpSubnetVlanGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.26 | A collection of hwL2VlanIpSubnetVlanTable objects. | ||
| hwL2VlanMacVlanGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.27 | A collection of hwL2VlanMacVlanTable objects. | ||
| hwL2VlanProtocolVlanGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.28 | A collection of hwL2VlanProtocolVlanTable objects. | ||
| hwL2VlanPolicyVlanGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.29 | A collection of hwL2VlanPolicyVlanTable objects. | ||
| hwL2VlanVoiceVlanGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.30 | A collection of Voice VLAN related objects. | ||
| hwL2VlanMappingMultiGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.31 | A collection of hwL2VlanMappingMultiTable objects. | ||
| hwL2VlanSwitchPSGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.32 | A collection of vlan statistic in the port. | ||
| hwL2VlanMacVlanNewGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.33 | A collection of hwL2VlanMacVlanNewTable objects. | ||
| hwL2VlanProtocolVlanNewGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.34 | A collection of hwL2VlanProtocolVlanNewTable objects. | ||
| hwL2VlanPolicyVlanNewGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.35 | A collection of hwL2VlanPolicyVlanNewTable objects. | ||
| hwL2VlanProtocolVlanPortNewGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.36 | A group of protocol vlan port. | ||
| hwL2VlanMultiVoiceVlanPortGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.37 | A collection of hwL2VlanMultiVoiceVlanPortTable objects. | ||
| hwL2VlanPrecedenceGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.38 | A collection of hwL2VlanPrecedence object. | ||
| hwL2VlanXlateGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.39 | A collection of hwL2VlanXlateGroup object. | ||
| hwL2VlanSwitchExtGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.40 | A group of vlan switch extent table. | ||
| hwL2QinQVlanGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.41 | A group of QinQ-VLAN table. | ||
| hwL2UntagAddDTagGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.1.42 | A group of untagged VLAN add double tagged VLAN table. | ||
| hwL2vlanCompliances | 1.3.6.1.4.1.2011.5.25.42.3.2.2 | |||
| hwL2vlanCompliance | 1.3.6.1.4.1.2011.5.25.42.3.2.2.1 | The compliance statement for device support of Virtual LAN services. | ||
| hwL2VlanTrapsGroups | 1.3.6.1.4.1.2011.5.25.42.3.2.3 | |||
| hwL2VlanTrapsGroup | 1.3.6.1.4.1.2011.5.25.42.3.2.3.1 | The Group of L2VLAN Trap. |
RFC description
Huawei vendor MIB for managing Layer 2 VLAN configuration, including VLAN creation, membership, and QoS policies.
Start monitoring Huawei VRP-based Ethernet switch or router (VLAN/QinQ/super-VLAN management) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.