HP-ICF-POE-MIB

All MIBs › HP-ICF-POE-MIB

Organization: HP Networking

Last Updated: 2017-01-30

Category: Domain: Power Management, Technology: PoE, Vendor: HP/HPE

Description: HP ICF SNMP MIB for Power over Ethernet (PoE/PoE+) port power allocation, consumption, and limit management on HP ProCurve switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HP-ICF-POE-MIB?

HP-ICF-POE-MIB is a Hewlett-Packard proprietary SNMP module in the HP ICF family that manages Power Sourcing Equipment (PSE) for Power over Ethernet (PoE/PoE+) ports on ProCurve/Aruba switches. It exposes per-port power delivery data — current, voltage, power draw, allocation method, and configured power budget — as well as operational status and power mode for each PoE-capable port. This is squarely a hardware health and capacity monitoring MIB: administrators use it to watch actual power consumption against allocated limits, detect a port that has failed to power up, and track LLDP-negotiated power needs from connected devices such as IP phones or wireless access points. It builds on concepts from the standard POWER-ETHERNET-MIB (RFC 3621), using HP-specific table names (hpicfPoePethPsePortTable) alongside the standard PoE model. It is deployed wherever HP switches supply PoE to phones, cameras, and wireless APs, particularly in installations near the switch's total power budget. Network engineers evaluating or troubleshooting this functionality can download the HP-ICF-POE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HP-ICF-POE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP ProCurve PoE switch
HP Aruba PoE switch

Monitoring Examples

An administrator can poll hpicfPoePethPsePortTable/hpicfPoePethPsePortEntry for objects like hpicfPoePethPsePortCurrent, hpicfPoePethPsePortVoltage, and hpicfPoePethPsePortPower to track live power draw on each port, and check hpicfPoePethPsePortOperStatus to see whether a port has actually powered on its connected device. Comparing hpicfPoePethPsePortActualPower against hpicfPoePethPsePortPowerValue or hpicfPoePethPsePortPoePlusPowerValue reveals whether a port is nearing its allocated power ceiling, which would explain a PoE device (like an AP) failing to power up when the switch's total budget is exhausted.

What Can Be Monitored

per-port PoE current draw
per-port PoE voltage
per-port power consumption
PoE port operational status
power allocation mode
LLDP-negotiated power detection

Imported Objects

From ENTITY-MIB

entPhysicalIndex

OBJECT-TYPE

From HP-ICF-OID

hpicfCommon

OBJECT-IDENTITY

From POWER-ETHERNET-MIB

pethMainPseEntry	OBJECT-TYPE
pethPsePortEntry	OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpicfPOE	1.3.6.1.4.1.11.2.14.11.1.9.1			This MIB module describes management objects that manage Power Source Equipment (PSE).
hpicfPoePethPsePortTable	1.3.6.1.4.1.11.2.14.11.1.9.1.1		not-accessible	This table supplements the table 'pethPsePortTable' in ieee802af.mib.
hpicfPoePethPsePortEntry	1.3.6.1.4.1.11.2.14.11.1.9.1.1.1		not-accessible	The fields in these entries will be used to supplement fields in 'pethPsePortEntry in ieee802af.mib.
I32 hpicfPoePethPsePortCurrent	1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.1	Integer32	read-only	This field specifies the current supplied at this port. This value is specified in milli amperes(mA).
I32 hpicfPoePethPsePortVoltage	1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.2	Integer32	read-only	This field specifies the Voltage supplied at this port. This value is specified in 10's of volts (dV)
I32 hpicfPoePethPsePortPower	1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.3	Integer32	read-only	This field specifies the Power supplied at this port. This value is specified in milliwatts (mW).
INT hpicfPoePethPsePortPowerAllocateBy	1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.4	INTEGER	read-write	This field specifies the power allocation method for this port. The default value is usage.
I32 hpicfPoePethPsePortPowerValue	1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.5	Integer32	read-write	This field specifies the power allocation defined for this port. This value is specified in Watts (W).
INT hpicfPoePethPsePortLLDPDetect	1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.6	INTEGER	read-write	This field specifies if power should be allocated using LLDP advertised information regarding the PD.
I32 hpicfPoePethPsePortPoePlusPowerValue	1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.7	Integer32	read-write	This field specifies the power allocation defined for this port. Use this object for equipment supporting high power, that is greater than 15 Watts. This value is specified in Watts (W). This object may only be read or written when hpicfPoePethPsePortPowerAllocateBy is set to value(3).
I32 hpicfPoePethPsePortActualPower	1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.8	Integer32	read-only	This field specifies the actual power drained by the device connected to this port.
INT hpicfPoePethPsePortOperStatus	1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.9	INTEGER	read-only	This field specifies the operational status of the port
INT hpicfPoePethPsePortPowerMode	1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.10	INTEGER	read-only	This field specifies the power mode of the port whether enabled or disabled or disableWithFiber
I32 hpicfPoePethPsePortAveragePower	1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.11	Integer32	read-only	This field specifies the average power supplied to this port which is used by the device connected to it.
I32 hpicfPoePethPsePortPeakPower	1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.12	Integer32	read-only	This field specifies the peak power supplied to this port which is used by the device connected to it.
INT hpicfPoePethPsePortPreStdDetect	1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.13	INTEGER	read-write	This field specifies the pre standard detect status for this port. A value of On - indicates that power pre-802.3af-standard devices. A value of Off - indicates that only pre-802.3af/at compliant devices are allowed. The default value is Off.
INT hpicfPoePethPsePortLowPriority	1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.14	INTEGER	read-only	This object indicates whether a particular port shuts down in the event of any PSU failure in the system. A value of (1) indicates a low priority port which shuts down in the event of any PSU failure. A value of (2) indicates a high priority port which is unaffected by the failure of any single PSU. The default value is high.
INT hpicfPoePethPsePortResetState	1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.15	INTEGER	read-write	This object is used to reset the PoE controller HW to which the port is associated.
INT hpicfPoePethPsePortPowerType	1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.16	INTEGER	read-only	This field specifies the PD type determined during physical layer classification. The default value is -1.
hpicfPoeConformance	1.3.6.1.4.1.11.2.14.11.1.9.1.2
hpicfPoeCompliances	1.3.6.1.4.1.11.2.14.11.1.9.1.2.1
hpicfPoeCompliance	1.3.6.1.4.1.11.2.14.11.1.9.1.2.1.1			A compliance statement for HP Routing switches with PoE capability
hpicfPoeCompliance1	1.3.6.1.4.1.11.2.14.11.1.9.1.2.1.2			A compliance statement for HP Routing switches with PoE capability
hpicfPoeCompliance2	1.3.6.1.4.1.11.2.14.11.1.9.1.2.1.3			A compliance statement for HP Routing switches with PoE capability
hpicfPoeCompliance3	1.3.6.1.4.1.11.2.14.11.1.9.1.2.1.4			A compliance statement for HP Routing switches with PoE capability
hpicfPoeCompliance4	1.3.6.1.4.1.11.2.14.11.1.9.1.2.1.5			A compliance statement for HP Routing switches with PoE capability
hpicfPoeCompliance5	1.3.6.1.4.1.11.2.14.11.1.9.1.2.1.6			A compliance statement for HP Routing switches with PoE capability
hpicfPoeCompliance6	1.3.6.1.4.1.11.2.14.11.1.9.1.2.1.7			A compliance statement for HP Routing switches with PoE capability
hpicfPoeCompliance7	1.3.6.1.4.1.11.2.14.11.1.9.1.2.1.8			A compliance statement for HP Routing switches with PoE capability
hpicfPoeCompliance8	1.3.6.1.4.1.11.2.14.11.1.9.1.2.1.9			A compliance statement for HP Routing switches with PoE capability
hpicfPoeGroups	1.3.6.1.4.1.11.2.14.11.1.9.1.2.2
hpicfPoePethPsePortTableGroup	1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.1			A collection of objects allowing configuration of PoE PSE Port table
hpicfPoeGlobalGroup	1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.2			A collection of objects related to the global configuration of POE on a given chassis.
hpicfPseFeaturesGroup	1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.3			A Collection of Object(s) that provide information about each power source equipment instance.
hpicfPoePowerSupplyGroup	1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.4			A collection of objects related to Power Supply.
hpicfPoePethPseOperStateTableGroup	1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.5			A collection of objects related to Power Supply.
hpicfPoePethPsePowerTableGroup	1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.6			A collection of objects related to Power Usage parameters.
hpicfPoePowerUsageGlobalGroup	1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.7			A collection of objects related to Power Usage parameters Globally.
hpicfPseParamsGroup	1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.8			A Collection of Object(s) that provide information about each power source equipment instance.
hpicfPoePethPsePortPreStdDetectGroup	1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.9			A collection of objects related to port pre std detect status.
hpicfPoeAuxPowerSupplyGroup	1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.10			A collection of objects providing information about auxiliary power supply.
hpicfPoeLowPowerPortGroup	1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.11			A collection of objects providing information about low priority ports.
hpicfPseParamsGroup1	1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.12			A Collection of Object(s) that provide information about each power source equipment instance.
hpicfPoePethPsePortPowerGroup	1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.13			A collection of objects providing information about port power type.
hpicfPoePethPseOperStateTableGroup1	1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.14			A collection of objects related to Power Supply.
T/F hpicfPoeAllowPreStdDetect	1.3.6.1.4.1.11.2.14.11.1.9.1.3	TruthValue	read-write	This object is used to configure the default POE power detection mode. A value of TRUE - indicates that power pre-802.3af-standard devices. A value of FALSE - indicates that only pre-802.3af compliant devices are allowed. The default value is true. In a stack, this value pertains only to the commander switch.
INT hpicfPoePowerRedundancy	1.3.6.1.4.1.11.2.14.11.1.9.1.4	INTEGER	read-write	This object is used to configure the POE power redundancy mode. A value of none(1) - means that all available power can be allocated to powered devices. A value of nPlus1(2) - means that one of the highest power supplies is held in reserve and that in the event of a single power supply failure, no no powered devices will be shut down. A value of full(3) - means that half of the available power supplies are held in reserve. The default value is none(1). In a stack, this value pertains only to the commander switch.
I32 hpicfPoeExtPwrSupplyCount	1.3.6.1.4.1.11.2.14.11.1.9.1.5	Integer32	read-write	This object is used to configure the number of external power supplies expected to be connected to the chassis. The default value is 1. In a stack, this value pertains only to the commander switch.
hpicfPseFeaturesTable	1.3.6.1.4.1.11.2.14.11.1.9.1.6		not-accessible	This table describes the features of each power source equipment (PSE). On standalone switches (both stackable and chassis switches) there shall be only one entry in this table. In a stack, there shall be one entry for each stack member.
hpicfPseFeaturesEntry	1.3.6.1.4.1.11.2.14.11.1.9.1.6.1		not-accessible	A row in the PSE features table, signifying a single power source equipment.
T/F hpicfPseAllowPreStdDetect	1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.1	TruthValue	read-write	This object is used to configure the default POE power detection mode for this power source equipment. A value of TRUE - indicates that power pre-802.3af-standard devices. A value of FALSE - indicates that only pre-802.3af compliant devices are allowed. The default value is true.
INT hpicfPsePowerRedundancy	1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.2	INTEGER	read-write	This object is used to configure the POE power redundancy mode for this power source equipment. A value of none(1) - means that all available power can be allocated to powered devices. A value of nPlus1(2) - means that one of the highest power supplies is held in reserve and that in the event of a single power supply failure, no powered devices will be shut down. A value of full(3) - means that half of the available power supplies are held in reserve. The default value is none(1).
I32 hpicfPseExtPwrSupplyCount	1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.3	Integer32	read-write	This object is used to configure the number of external power supplies expected to be connected to the Power Source Equipment. The default value is 1.
I32 hpicfPseAvailablePower	1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.4	Integer32	read-only	This field specifies the total power available on this Power source equipment. This includes internal and external power supplies.
I32 hpicfPseUsedPower	1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.5	Integer32	read-only	This field specifies the total power allocated on the Power Source Equipment. This is the sum of the power allocated to all the ports on the PSE.
I32 hpicfPseFailoverPower	1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.6	Integer32	read-only	This field specifies the failover power for this Power Source Equipment.
I32 hpicfPseRedundantPower	1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.7	Integer32	read-only	This field specifies the redundancy POE power available to the Power Source Equipment.
I32 hpicfPseCurrentPowerDraw	1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.8	Integer32	read-only	This field specifies the redundancy POE power available to the Power Source Equipment.
hpicfPoePowerSupplyTable	1.3.6.1.4.1.11.2.14.11.1.9.1.7		not-accessible	This table contains one row per power supply available to the switch.
hpicfPoePowerSupplyEntry	1.3.6.1.4.1.11.2.14.11.1.9.1.7.1		not-accessible	Information about a particular power supply. Each entry provides information about power supply whether it is external or internal, if it is poe/poePlus and the capacity of the power supply.
INT hpicfPoePowerSupplySourceType	1.3.6.1.4.1.11.2.14.11.1.9.1.7.1.1	INTEGER	read-only	This field specifies whether the power supply is external or internal. Stackable switch has inbuilt power supply and can have upto 1 external power supply. Chassis switch can have upto 2 internal power supplies for 6 slot and upto 4 for 12 slot. Chassis switch can have upto 2 external power supplies.
INT hpicfPoePowerSupplyType	1.3.6.1.4.1.11.2.14.11.1.9.1.7.1.2	INTEGER	read-only	This field specifies the type of the power supply, poe or poePlus.
I32 hpicfPoePowerSupplyCapacity	1.3.6.1.4.1.11.2.14.11.1.9.1.7.1.3	Integer32	read-only	This field specifies the capacity of the power supply.
I32 hpicfPoePowerSupplyAuxCapacity	1.3.6.1.4.1.11.2.14.11.1.9.1.7.1.4	Integer32	read-only	This MIB object specifies the capacity of the auxiliary power supply. The power supplies other than the model J9830A returns the value NULL.
hpicfPoePethPseOperStateTable	1.3.6.1.4.1.11.2.14.11.1.9.1.8		not-accessible	This table supplements the table 'pethPsePortTable' in ieee802af.mib.
hpicfPoePethPseOperStateEntry	1.3.6.1.4.1.11.2.14.11.1.9.1.8.1		not-accessible	The fields in these entries will be used to supplement fields in 'pethPsePortEntry in ieee802af.mib.
INT hpicfPoePethPseOperState	1.3.6.1.4.1.11.2.14.11.1.9.1.8.1.1	INTEGER	read-only	This field specifies the operation status. The default value is on.
I32 hpicfPoePethPsePortNum	1.3.6.1.4.1.11.2.14.11.1.9.1.8.1.2	Integer32	read-only	This field specifies the port number.
I32 hpicfPoePethMainPsePdPowerDraw	1.3.6.1.4.1.11.2.14.11.1.9.1.8.1.3	Integer32	read-only	This field specifies the total actual power that is used by all the ports on this slot or member.
I32 hpicfPoeMaxGuaranteedPower	1.3.6.1.4.1.11.2.14.11.1.9.1.9	Integer32	read-only	This field specifies the guaranteed maximum PoE power, namely, the maximum power supplied to critical PSEs
I32 hpicfPoeRemainingGuaranteedPower	1.3.6.1.4.1.11.2.14.11.1.9.1.10	Integer32	read-only	This field specifies the Remaining Guaranteed power. This is difference of Guaranteed Maximum PoE Power and the sum of maximum power of critical PSEs
hpicfPoePethPsePowerTable	1.3.6.1.4.1.11.2.14.11.1.9.1.11		not-accessible	This table supplements the table 'pethPsePortTable' in ieee802af.mib.
hpicfPoePethPsePowerEntry	1.3.6.1.4.1.11.2.14.11.1.9.1.11.1		not-accessible	The fields in these entries will be used to supplement fields in pethPsePortEntry in ieee802af.mib.
I32 hpicfPoePethPsePeakPower	1.3.6.1.4.1.11.2.14.11.1.9.1.11.1.1	Integer32	read-only	This field specifies the peak power of the PSE.
I32 hpicfPoePethPseAvgPower	1.3.6.1.4.1.11.2.14.11.1.9.1.11.1.2	Integer32	read-only	This field specifies the average power of the PSE.
I32 hpicfPoePethPseRemGrntPower	1.3.6.1.4.1.11.2.14.11.1.9.1.11.1.3	Integer32	read-only	Guaranteed remaining power of PSEs

RFC description

Power over Ethernet (PoE) MIB for HP switches managing Power Source Equipment (PSE) and powered device status.

Start monitoring HP ProCurve/Aruba PoE switch with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HP-ICF-POE-MIB

What Is HP-ICF-POE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description