All MIBs › HP-ICF-POE-MIB › hpicfPoePowerRedundancy
hpicfPoePowerRedundancy
Module: HP-ICF-POE-MIB
OID (symbolic): HP-ICF-POE-MIB::hpicfPoePowerRedundancy
OID (numeric): 1.3.6.1.4.1.11.2.14.11.1.9.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used to configure the POE power redundancy mode. A value of none(1) - means that all available power can be allocated to powered devices. A value of nPlus1(2) - means that one of the highest power supplies is held in reserve and that in the event of a single power supply failure, no no powered devices will be shut down. A value of full(3) - means that half of the available power supplies are held in reserve. The default value is none(1). In a stack, this value pertains only to the commander switch.
What is hpicfPoePowerRedundancy?
Deprecated chassis-wide setting, replaced by the per-PSE hpicfPsePowerRedundancy, that reserved power-supply capacity: nPlus1(2) held one supply in reserve so a single PSU failure wouldn't drop any powered device, and full(3) reserved half.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.1.9.1.4 snmpwalk -v2c -c public <target> HP-ICF-POE-MIB::hpicfPoePowerRedundancy
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.1.9.1.4.1 snmpget -v2c -c public <target> HP-ICF-POE-MIB::hpicfPoePowerRedundancy.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.1.9.1.4.1 i <value>
Start monitoring HP ProCurve/Aruba PoE switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-POE-MIB::hpicfPoePowerRedundancy OID value, configure state conditions and alerts, and monitor any HP ProCurve/Aruba PoE switch from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.1 | hpicfCommon | HP-ICF |
| 1.3.6.1.4.1.11.2.14.11.1.9 | hpicfPOE | HP-ICF-OID |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.1.9.1 | hpicfPOE | HP-ICF-POE-MIB |
| 1.3.6.1.4.1.11.2.14.11.1.9.1.4 | hpicfPoePowerRedundancy | HP-ICF-POE-MIB |