CPQHSV400V11-MIB

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CPQHSV400V11-MIB

Category: Fibre Channel and Storage, Vendor: HP/HPE

Description: Manages Compaq/HP StorageWorks HSV400 v11 high-capacity SAN controller and disk group objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CPQHSV400V11-MIB?

CPQHSV400V11-MIB is a Compaq/HP vendor MIB for managing the HSV400 v11 StorageWorks controller, a higher-capacity SAN array controller in the Compaq/HP Enterprise Virtual Array family. It exposes management objects for controller health, virtual disk status, and disk group configuration, geared toward larger-capacity SAN deployments than the HSV340/HSV360 siblings. Its monitoring focus is storage hardware status: controller online/failover state, virtual disk online/degraded/rebuilding condition, and disk group capacity and redundancy health, which together flag developing storage faults before they become outages. It shares structural conventions with the other HSV-series MIBs and the wider Compaq/HP enterprise MIB tree. It is deployed in larger enterprise data centers running high-capacity HSV400 SAN arrays for consolidated block storage. Network engineers evaluating or troubleshooting this functionality can download the CPQHSV400V11-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CPQHSV400V11-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

  • Compaq/HP StorageWorks HSV400 SAN array controller

Monitoring Examples

An administrator would monitor controller status to verify failover pairing is healthy, and check virtual disk and disk group status to detect a degraded or rebuilding LUN following a physical disk failure, which would need prompt replacement to restore redundancy. No sample objects were provided for this MIB, so exact object names cannot be cited; this reflects the general controller/disk-group health monitoring pattern typical of Compaq/HP HSV-series array MIBs.

What Can Be Monitored

  • controller operational status
  • virtual disk/LUN status
  • disk group capacity/redundancy status
  • array fault condition
Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

enterprises

From RFC1213-MIB

DisplayString
OIDs

RFC description

Manages HP StorageWorks HSV400 v11 storage systems including controllers, shelves, and SAN components.

Start monitoring Compaq/HP StorageWorks HSV400 SAN array controller with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CPQHSV400V11-MIB