All MIBs › HP-ICF-POE-MIB › hpicfPsePowerRedundancy
hpicfPsePowerRedundancy
Module: HP-ICF-POE-MIB
OID (symbolic): HP-ICF-POE-MIB::hpicfPsePowerRedundancy
OID (numeric): 1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used to configure the POE power redundancy mode for this power source equipment. A value of none(1) - means that all available power can be allocated to powered devices. A value of nPlus1(2) - means that one of the highest power supplies is held in reserve and that in the event of a single power supply failure, no powered devices will be shut down. A value of full(3) - means that half of the available power supplies are held in reserve. The default value is none(1).
What is hpicfPsePowerRedundancy?
Configures power-supply redundancy for one PSE, such as a stack member or chassis slot: nPlus1(2) reserves the highest-capacity supply so a single PSU failure powers down no devices, while full(3) reserves half the supplies for maximum protection at the cost of available PoE budget.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.2 snmpwalk -v2c -c public <target> HP-ICF-POE-MIB::hpicfPsePowerRedundancy
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.2.1 snmpget -v2c -c public <target> HP-ICF-POE-MIB::hpicfPsePowerRedundancy.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.2.1 i <value>
Start monitoring HP ProCurve/Aruba PoE switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-POE-MIB::hpicfPsePowerRedundancy OID value, configure state conditions and alerts, and monitor any HP ProCurve/Aruba PoE switch from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.1 | hpicfCommon | HP-ICF |
| 1.3.6.1.4.1.11.2.14.11.1.9 | hpicfPOE | HP-ICF-OID |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.1.9.1 | hpicfPOE | HP-ICF-POE-MIB |
| 1.3.6.1.4.1.11.2.14.11.1.9.1.6 | hpicfPseFeaturesTable | HP-ICF-POE-MIB |
| 1.3.6.1.4.1.11.2.14.11.1.9.1.6.1 | hpicfPseFeaturesEntry | HP-ICF-POE-MIB |
| 1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.2 | hpicfPsePowerRedundancy | HP-ICF-POE-MIB |