| OID symbolic | OID numeric | Type | Access | Description |
|---|
| hpicfBridge | 1.3.6.1.4.1.11.2.14.11.5.1.12 | | | This MIB module contains HP proprietary
extensions to the standard Bridge MIBs. |
| hpicfBridgeObjects | 1.3.6.1.4.1.11.2.14.11.5.1.12.1 | | | |
| hpicfBridgeBase | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.1 | | | |
| I32 hpicfBridgeMaxVlans | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.1.1 | Integer32 | read-write | Defines the number of VLANs that the switch will
support for dynamic use without requiring a reboot. |
| INT hpicfBridgeVlanEnable | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.1.2 | INTEGER | read-write | Administrative status of VLAN support on this
switch. |
| VLA hpicfBridgePrimaryVlan | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.1.3 | VlanIndex | read-write | The 802.1Q VLAN ID of the primary VLAN for this
switch. |
| CON hpicfBridgeVlanConfigStatus | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.1.4 | ConfigStatus | read-only | If one or more variables in this group has been
reconfigured since the last reboot in such a way
as to require a reboot to take effect, the value
of this variable will be set to 'notInService'. |
| hpicfBridgeGvrp | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.2 | | | |
| hpicfBridgeGvrpPortTable | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.1 | | not-accessible | A table that contains information about the
GVRP port configurations on this switch. |
| hpicfBridgeGvrpPortEntry | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.1.1 | | not-accessible | GVRP information associated with a single port. |
| T/F hpicfBridgeGvrpRestrictedVlanReg | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.1.1.1 | TruthValue | read-write | Controls GVRP's ability to learn new VLANs on
this port. When set to 'false', GVRP will accept
JOIN requests for new VLANs on this port. When
set to 'true', GVRP will only process protocol
packets that concern themselves with known VLANs. |
| hpicfBridgeGvrpStateMachineTable | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.2 | | not-accessible | A table that contains information about the
GVRP state Machine(s) configuration. |
| hpicfBridgeGvrpStateMachineEntry | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.2.1 | | not-accessible | A row in a table, containing the VLAN ID and Portlist. |
| VLA hpicfGenericVlanId | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.2.1.1 | VlanId | not-accessible | The VLAN ID to which this entry belongs. |
| INT hpicfApplicantStateMachine | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.2.1.2 | INTEGER | read-only | This MIB provides the Applicant State Machine values of
the GVRP enabled port as follows,0 = va, 1 = aa,2 = qa,
3 = la,4 = vp,5 = ap,6 = qp,7 = vo,8 = ao,9 = qo,10 = lo,
11 = von,12 = aon,13 = qon. Whereas, the first letter
indicates the state: V for Very anxious, A for Anxious,
Q for Quiet, and L for Leaving. The second letter indicates
the membership state: A for Active member,P for Passive member,
O for Observer. And the third letter N (if any) stands for
Non-participant. |
| INT hpicfRegistarStateMachine | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.2.1.3 | INTEGER | read-only | This MIB provides the Registrar state machine value for the
GVRP enabled port as follows,0 = inn,1 = lv,2 = l3,3 = l2,
4 = l1,5 = mt,6 = inr,7 = lvr,8 = l3r,9 = l2r,10 = l1r,11 = mtr,
12 = inf,13 = lvf,14 = l3f,15 = l2f,16 = l1f,17 = mtf . Whereas,
the first two letters/numbers indicate the state: IN stands for
In; LV, L3, L2, and L1 all stand for Leaving, and L3, L2, L1 are
three sub-states of LV; MT stands for Empty. And the third letter
indicates the registration mode: N (or the third letter being
absent) for normal registration,R for Registration fixed, and F
for Registration forbidden.. indicating the fixed registration
mode in Empty state. |
| hpicfBridgeRstp | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4 | | | |
| INT hpicfBridgeRstpForceVersion | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.1 | INTEGER | read-write | The operational mode of the Spanning Tree Protocol.
A value of stpCompatibility (0) indicates that the Spanning Tree Protocol
operates in IEEE 802.1d mode on all ports.
A value of rstpOperation (2) indicates that the Spanning Tree Protocol
operates in IEEE 802.1w mode on all ports, except for the ports to which bridges are
connected. The ports to which bridges are connected operate in IEEE 802.1d mode for
backward compatibility.
A value of mstpOperation (3) indicates that the Spanning Tree Protocol
operates in IEEE 802.1s mode on all ports, except for the ports to which bridges are
connected. The ports to which bridges are connected operate in IEEE 802.1d mode for
backward compatibility.
This option is available only if object 'hpicfBridgeRstpProtocolVersion' is set to 'ieee8021s'. |
| CON hpicfBridgeRstpConfigStatus | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.2 | ConfigStatus | read-only | The configuration status of this group of objects. The value of this object is set to
'notInService' if any variable in this group is reconfigured since the last reboot and
a system reboot is required for the configuration to take effect. |
| INT hpicfBridgeRstpProtocolVersion | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.3 | INTEGER | read-write | The version of Spanning Tree Protocol currently running on the switch.
- ieee8021d is the version of Spanning Tree Protocol defined as IEEE 802.1d (STP).
- ieee8021w is the version of Spanning Tree Protocol defined as IEEE 802.1w (RSTP).
- ieee8021s is the version of Spanning Tree Protocol defined as IEEE 802.1s (MSTP). |
| INT hpicfBridgeRstpAdminStatus | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.4 | INTEGER | read-write | The operational status of the Spanning Tree Protocol |
| hpicfBridgeRstpPortTable | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5 | | not-accessible | A table that contains information about STP configuration on all ports. |
| hpicfBridgeRstpPortEntry | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1 | | not-accessible | An entry in the hpicfBridgeRstpPortTable which holds the information of STP
configuration of a port. An entry is available for each port in this table. |
| I32 hpicfBridgeRstpPortIndex | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.1 | Integer32 | read-only | The port number of the port for which this entry
contains Spanning Tree Protocol management
information. |
| INT hpicfBridgeRstpAdminEdgePort | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.2 | INTEGER | read-write | Indicate that port is connected to LAN segment that don't
have any bridge connected to it |
| INT hpicfBridgeRstpOperEdgePort | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.3 | INTEGER | read-only | Reflects the value of the operEdgePort parameter, as
defined by the operation of the Bridge Detection state
machine (Clause 18 of P802.1t). The value of this parameter
is used by a Designated Port in order to determine how
rapidly it may transition to the Forwarding Port State
(see 17.23, Port Role Transitions state machine).
The Bridge Detection state machine sets this parameter to
the value of adminEdgePort (P802.1t 18.1.3) on
initialization, and forces its value to FALSE if any BPDUs
are received on the Port. |
| INT hpicfBridgeRstpAdminPointToPointMac | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.4 | INTEGER | read-write | forceTrue: This value indicates that the administrator requires the MAC
to be treated as if it is connected to a point-to-point LAN
segment, regardless of any indications to the contrary that
are generated by the MAC entity.
forceFalse: This value indicates that the administrator requires the MAC
to be treated as if it is connected to a non-point-to-point
LAN segment, regardless of any indications to the contrary
that are generated by the MAC entity.
auto: This value indicates that the administrator requires the
point-to-point status of the MAC to be determined in accordance
with the specific MAC procedures defined in 6.5. |
| T/F hpicfBridgeRstpOperPointToPointMac | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.5 | TruthValue | read-only | true: This value indicates that the MAC is connected to a
point-to-point LAN segment; i.e., there is at most one other
system attached to the LAN segment.
false: This value indicates that the MAC is connected to a
non-point-to-point LAN segment; i.e., there can be more than one
other system attached to the LAN segment. |
| I32 hpicfBridgeRstpPortPathCost | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.6 | Integer32 | read-write | Rapid Reconfiguration Port Path Cost - 32 bit values |
| T/F hpicfBridgeRstpForceBpduMigrationCheck | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.7 | TruthValue | read-write | When operating in RSTP version 2 or later,
writing TRUE(1) to this object forces this port to
transmit RSTP BPDUs. Any other operation on this object
always returns FALSE(2) when read. |
| T/F hpicfBridgeRstpAutoEdgePort | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.8 | TruthValue | read-write | This object determines the identification of edge ports.
When set to TRUE, it is used by the bridge detection state
machine for automatic identification of edge ports.
The default value is FALSE. |
| T/F hpicfBridgeRstpPortBpduFiltering | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.9 | TruthValue | read-write | This objects determines the BPDU filtering on ports.
When set to TRUE, the port does not transmit any BPDU and all the
received BPDUs are dropped. When set to FALSE, all the BPDUs are
processed normally. The default is false. |
| hpicfBridgeStpBpduThrottleConfig | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.6 | | | |
| INT hpicfBridgeStpBpduThrottleStatus | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.6.1 | INTEGER | read-write | This object is used to enable or disable the BPDU Throttling
feature on the device. |
| I32 hpicfBridgeStpBpduThrottleValue | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.6.2 | Integer32 | read-write | This object provides the inbound rate limit value to throttle
the MSTP BPDUs on the device. The valid throttle values are
64, 128, and 256 packets per second (pps).
The default throttle value is 256 pps |
| hpicfBridgeLoopProtect | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5 | | | |
| hpicfBridgeLoopProtectNotifications | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.0 | | | |
| NTF hpicfBridgeLoopProtectLoopDetectedNotification | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.0.1 | | | A hpicfBridgeLoopProtectLoopDetectedNotification signifies
that a loop is detected by the Loop Protection Protocol.
Generation of this notification is controlled by
hpicfBridgeLoopProtectTrapLoopDetectEnable.
To prevent excessive notifications, this trap allows only
one notifications every 30 seconds.
Notifications that are missed due to this limitation are
dropped and are not sent later. |
| NTF hpicfBridgeVlanLoopProtectLoopDetectedNotification | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.0.2 | | | A hpicfBridgeLoopProtectLoopDetectedNotification signifies
that a loop is detected by the Loop Protection feature while
operating in VLAN mode. Generation of this notification is
controlled by hpicfBridgeLoopProtectTrapLoopDetectEnable.
To prevent excessive notifications, this trap allows only
one notifications every 30 seconds.
Notifications that are missed due to this limitation are
dropped and are not sent later. |
| hpicfBridgeLoopProtectBase | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.1 | | | |
| I32 hpicfBridgeLoopProtectInterval | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.1.1 | Integer32 | read-write | The interval in seconds at which Loop Protection packets are
transmitted. The default value is 5 seconds. |
| T/F hpicfBridgeLoopProtectTrapLoopDetectEnable | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.1.2 | TruthValue | read-write | Indicates whether notifications should be sent when a loop
is detected on a port. By default this object will
have a value of false(2). |
| I32 hpicfBridgeLoopProtectEnableTimer | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.1.3 | Integer32 | read-write | The time in seconds to wait before re-enabling a port
disabled by Loop Protection. When a port is disabled by
Loop Protection, a re-enable timer for the port is initialized.
If the re-enable timer value is specified as zero seconds the port remains
disabled, else the port is re-enabled after the specified time. |
| INT hpicfBridgeLoopProtectMode | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.1.4 | INTEGER | read-write | This object is used to configure the operational mode of Loop Protection
feature. The Loop Protection feature can be configured to operate in port mode
or VLAN mode. |
| VID hpicfBridgeLoopProtectVIDList | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.1.5 | VidList | read-write | A list of VLANs on which Loop Protection is enabled. |
| hpicfBridgeLoopProtectPort | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2 | | | |
| hpicfBridgeLoopProtectPortTable | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1 | | not-accessible | Per-interface configuration for Loop Protection. |
| hpicfBridgeLoopProtectPortEntry | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1 | | not-accessible | Loop Protection configuration information for
a single port. |
| T/F hpicfBridgeLoopProtectPortEnable | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.1 | TruthValue | read-write | This object indicates whether the Loop Protection is enabled
on a port. The default value is FALSE |
| T/F hpicfBridgeLoopProtectPortLoopDetected | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.2 | TruthValue | read-only | This object will be set to TRUE when a loop is detected on
the port. The value of this object will be reset to FALSE when
the port's hpicfBridgeLoopProtectPortEnable is set to
FALSE. |
| TIM hpicfBridgeLoopProtectPortLastLoopTime | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.3 | TimeStamp | read-only | The value of sysUpTime when a loop was last detected
on this port. A value of 0 means that the timestamp has
not been set. |
| C32 hpicfBridgeLoopProtectPortLoopCountEx | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.4 | Counter32 | read-only | This object provides the number of loops detected on a Loop Protection enabled
port. The value of this object is set to zero when Loop Protection is disabled on
a port. |
| LOO hpicfBridgeLoopProtectPortReceiverAction | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.5 | LoopProtectReceiverAction | read-write | Controls the action taken when a Loop Protection packet is
received on this port.
When set to 'disableTx' the port that transmitted the packet is disabled.
When set to 'noDisable' the transmitting port is not disabled.
When set to 'disableTxRx' the ports transmitting and receiving the packets are disabled. |
| I32 hpicfBridgeLoopDetectedVlan | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.6 | Integer32 | read-only | Refers to this object for the port on which loop is
detected. |
| hpicfBridgeMirrorSession | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.6 | | | |
| hpicfBridgeMirrorSessionBase | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.1 | | | |
| hpicfBridgeMirrorSessionDestination | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.2 | | | |
| hpicfBridgeMirrorSessionTable | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.2.1 | | not-accessible | This table contains mirror session information
related to a given specified destination. A mirror
session is a group of one or more portCopyEntries
all having the same specified destination. A given
specified destination may be associated with more
then one mirror session. |
| hpicfBridgeMirrorSessionEntry | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.2.1.1 | | not-accessible | An entry in the hpicfBridgeMirrorSessionEntry contains
mirror session specific identification
information. |
| I32 hpicfBridgeMirrorSessionID | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.2.1.1.1 | Integer32 | read-create | This variable is valid only for mirroring
transfers. It allows mirroring destinations
to be grouped. A given hpicfBridgeMirrorSessionID
can only be used with 1 destination. However,
multiple sources may be related to the same
hpicfBridgeMirrorSessionID. To ensure that the
hpicfBridgeMirrorSessionID is properly assigned,
it can only be updated when the respective
portCopyEntry object is in the notReady state.
For non-mirroring transfers, the value should
be set to 0. |
| INT hpicfBridgeDontTagWithVlan | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.2.1.1.2 | INTEGER | read-write | This objects determines whether to include IEEE 802.1Q
tag in the mirrored copy of the packet.
When the value of this object is set to 1 ('enabled'),
the IEEE 802.1Q VLAN tag is not included in the
mirrored packet.
When the value of this object is set to 2 ('disabled'),
the IEEE 802.1Q VLAN tag is included in the
mirrored packet.
After this value is set, it is retained even after system reboot. |
| INT hpicfBridgeMirrorSessionType | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.2.1.1.3 | INTEGER | read-write | This oid mentions what is the source type of traffic
associated with mirror session.
noMirror Not associated with any mirroring.
mirrorAddresses Mirror traffic based on addresses
mirrorPolicies Mirror traffic based on policies.
mirrorPorts Mirror traffic based on ports.
mirrorVlan Mirror traffic based on vlan. |
| hpicfBridgeVoiceVlanConfig | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.7 | | | |
| hpicfBridgeVoiceVlanConfigTable | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.7.1 | | not-accessible | An HP proprietary extension to the dot1qVlanStaticTable to
configure a Voice VLAN. |
| hpicfBridgeVoiceVlanConfigEntry | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.7.1.1 | | not-accessible | An entry for HP Specific extension table. |
| T/F hpicfBridgeVoiceVlanEnable | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.7.1.1.1 | TruthValue | read-write | Labels the VLAN as a Voice VLAN which allows
to separate, prioritize, and authenticate voice
traffic moving through the network. |
| hpicfBridgeJumboInterfaceConfig | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.8 | | | |
| hpicfBridgeJumboInterfaceConfigTable | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.8.1 | | not-accessible | This table contains the jumbo frame configuration of
all interfaces. |
| hpicfBridgeJumboInterfaceConfigEntry | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.8.1.1 | | not-accessible | An entry in the hpicfBridgeJumboInterfaceConfigTable, which contains
the jumbo frame configuration of an interface. |
| T/F hpicfBridgeJumboInterfaceEnable | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.8.1.1.1 | TruthValue | read-write | This object enables or disables the support for jumbo frames. This configuration
is supported only on VLAN interfaces. |
| hpicfBridgeManagementInterfaceConfig | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.9 | | | |
| hpicfBridgeManagementInterfaceConfigTable | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.9.1 | | not-accessible | This table contains objects for configuring interface as
Management interface. |
| hpicfBridgeManagementInterfaceConfigEntry | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.9.1.1 | | not-accessible | An entry in the hpicfBridgeManagementInterfaceConfigEntry
contains objects for configuring interface as management
interface. |
| T/F hpicfBridgeManagementInterfaceEnable | 1.3.6.1.4.1.11.2.14.11.5.1.12.1.9.1.1.1 | TruthValue | read-write | This object configures a VLAN as a Secure Management VLAN.
When the value of this object is set to TRUE, a VLAN acts as a Secure
Management VLAN. The default value of this object is FALSE for all VLANs.
For VLAN with VID 1, which is the Secure Management VLAN of the switch
by default, the value is TRUE.
Only one VLAN can be configured as a Secure Management VLAN at any given time. |
| hpicfBridgeConformance | 1.3.6.1.4.1.11.2.14.11.5.1.12.2 | | | |
| hpicfBridgeGroups | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1 | | | |
| hpicfBridgeVlanBaseGroup | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.1 | | | Basic VLAN configuration information that is not
in the standard 802.1Q Bridge MIB. |
| hpicfBridgeGvrpPortGroup | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.2 | | | ********* THIS GROUP IS DEPRECATED *********
GVRP configuration information that is not (yet)
in the standard 802.1Q Bridge MIB.
Note that this information is very likely to be added
to a future update of the 802.1Q Bridge MIB, at which
time, support for objects in this group will most
likely be deprecated.
This object has been deprecated and replaced with
hpicfBridgeGvrpPortGroup1 |
| hpicfBridgeRstpBaseGroup | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.3 | | | Rapid Spanning Tree Protocol (RSTP) configuration
information that is in neither the standard 802.1w
MIB, nor the standard 802.1d (STP) MIB.
Note that as RSTP improves compatibility, some
objects in this MIB will likely be deprecated. |
| hpicfBridgeLoopProtectBaseGroup | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.4 | | | A collection of objects providing basic instrumentation
and control of the HP Loop protection entity. |
| hpicfBridgeMirrorSessionBaseGroup | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.5 | | | A collection of objects providing identification
of a mirroring session entity. |
| hpicfBridgeVoiceVlanConfigGroup | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.7 | | | A collection of objects for voice configuration
on vlan. |
| hpicfBridgeJumboInterfaceConfigGroup | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.8 | | | A collection of objects providing Jumbo configuration
on a interface. |
| hpicfBridgeManagementInterfaceConfigGroup | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.9 | | | A collection of objects for management interface
configuration. |
| hpicfBridgeLoopProtectVLANGroup | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.10 | | | A collection of objects providing support for Loop Protect
per VLAN feature. |
| hpicfBridgeRstpPortEntryGroup | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.11 | | | A collection of objects providing support for Rstp. |
| hpicfBridgeMirrorSessionEntryGroup | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.12 | | | A collection of objects providing mirror session
information related to a given specific destination. |
| hpicfBridgeRstpPortEntryGroup1 | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.13 | | | A collection of objects providing support for Rstp. |
| hpicfBridgeGvrpPortGroup1 | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.14 | | | GVRP configuration information that is not (yet)
in the standard 802.1Q Bridge MIB.
Note that this information is very likely to be added
to a future update of the 802.1Q Bridge MIB, at which
time, support for objects in this group will most
likely be deprecated. |
| hpicfBridgeStpBpduThrottleConfigGroup | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.15 | | | A group of objects that are used to configure the BPDU
Throttling feature. |
| hpicfBridgeCompliances | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2 | | | |
| hpicfBridgeCompliance | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.1 | | | The compliance statement for HP Switches with IEEE
802.1Q VLAN support for bridging objects not found
in the standard Bridge MIBs. |
| hpicfBridgeComplianceRevTwo | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.2 | | | The compliance statement for HP Switches with IEEE
802.1W Rapid Spanning Tree Protocol support for
bridging objects not found in the standard Bridge
MIBs. |
| hpicfBridgeComplianceRevThree | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.3 | | | The compliance statement for HP Switches with IEEE
802.1W Rapid Spanning Tree Protocol support for
bridging objects not found in the standard Bridge
MIBs. |
| hpicfBridgeComplianceRevFour | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.4 | | | The compliance statement for HP Switches with IEEE
802.1W Rapid Spanning Tree Protocol support for
bridging objects not found in the standard Bridge
MIBs. |
| hpicfBridgeLoopProtectCompliance | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.5 | | | The compliance statement for HP Switches with
support for hpicfBridge loop protection objects. |
| hpicfBridgeVlanBaseConfigCompliance | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.6 | | | The compliance statement for HP Switches that
support basic vlan configuration. |
| hpicfBridgeInterfaceConfigCompliance | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.7 | | | The compliance statement for HP Switches that
support basic interface configuration. |
| hpicfBridgeVlanLoopProtConfigCompliance | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.8 | | | The compliance statement for HP Switches that
support loop protect per VLAN feature. |
| hpicfBridgeRstpPortEntryCompliance | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.9 | | | The compliance statement for HP Switches that
support Rstp. |
| hpicfBridgeMirrorSessionEntryCompliance | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.10 | | | The compliance statement for HP Switches that
support mirror sessions. |
| hpicfBridgeRstpPortEntryCompliance1 | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.11 | | | The compliance statement for HP Switches that
support Rstp. |
| hpicfBridgeComplianceRevFour1 | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.12 | | | The compliance statement for HP Switches with IEEE
802.1W Rapid Spanning Tree Protocol support for
bridging objects not found in the standard Bridge
MIBs. |
| hpicfBridgeStpBpduThrottleConfigCompliance | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.13 | | | The compliance statement for the MSTP BPDU
Throttling feature. |
| hpicfBridgeNotGroups | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.3 | | | |
| hpicfBridgeLoopProtectNotGrp | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.3.1 | | | Notifications for Loop protection. |
| hpicfBridgeVlanLoopProtectNotGrp | 1.3.6.1.4.1.11.2.14.11.5.1.12.2.3.2 | | | Notifications for Loop protect per VLAN |
