All MIBs › HP-ICF-BRIDGE › hpicfBridgeRstpAdminPointToPointMac
hpicfBridgeRstpAdminPointToPointMac
Module: HP-ICF-BRIDGE
OID (symbolic): HP-ICF-BRIDGE::hpicfBridgeRstpAdminPointToPointMac
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: forceTrue: This value indicates that the administrator requires the MAC to be treated as if it is connected to a point-to-point LAN segment, regardless of any indications to the contrary that are generated by the MAC entity. forceFalse: This value indicates that the administrator requires the MAC to be treated as if it is connected to a non-point-to-point LAN segment, regardless of any indications to the contrary that are generated by the MAC entity. auto: This value indicates that the administrator requires the point-to-point status of the MAC to be determined in accordance with the specific MAC procedures defined in 6.5.
What is hpicfBridgeRstpAdminPointToPointMac?
Controls how the port's link type is determined for RSTP's fast-convergence logic: forceTrue always treats it as a point-to-point link, forceFalse always treats it as shared media, and auto lets the MAC layer infer it automatically; an admin overrides this on media (like some fiber links) where auto-detection gets the link type wrong.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.4 snmpwalk -v2c -c public <target> HP-ICF-BRIDGE::hpicfBridgeRstpAdminPointToPointMac
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.4.1 snmpget -v2c -c public <target> HP-ICF-BRIDGE::hpicfBridgeRstpAdminPointToPointMac.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.4.1 i <value>
Start monitoring HP ProCurve switch (802.1D/Q bridge/STP extensions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-BRIDGE::hpicfBridgeRstpAdminPointToPointMac OID value, configure state conditions and alerts, and monitor any HP ProCurve switch (802.1D/Q bridge/STP extensions) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.12 | hpicfBridge | HP-ICF-BRIDGE |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1 | hpicfBridgeObjects | HP-ICF-BRIDGE |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4 | hpicfBridgeRstp | HP-ICF-BRIDGE |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5 | hpicfBridgeRstpPortTable | HP-ICF-BRIDGE |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1 | hpicfBridgeRstpPortEntry | HP-ICF-BRIDGE |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.4 | hpicfBridgeRstpAdminPointToPointMac | HP-ICF-BRIDGE |