All MIBs › HP-ICF-BRIDGE › hpicfApplicantStateMachine
hpicfApplicantStateMachine
Module: HP-ICF-BRIDGE
OID (symbolic): HP-ICF-BRIDGE::hpicfApplicantStateMachine
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.2.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This MIB provides the Applicant State Machine values of the GVRP enabled port as follows,0 = va, 1 = aa,2 = qa, 3 = la,4 = vp,5 = ap,6 = qp,7 = vo,8 = ao,9 = qo,10 = lo, 11 = von,12 = aon,13 = qon. Whereas, the first letter indicates the state: V for Very anxious, A for Anxious, Q for Quiet, and L for Leaving. The second letter indicates the membership state: A for Active member,P for Passive member, O for Observer. And the third letter N (if any) stands for Non-participant.
What is hpicfApplicantStateMachine?
Reports the current IEEE 802.1Q GVRP Applicant state machine state for this VLAN/port combination (e.g. 'va' for Very-anxious-Active or 'qo' for Quiet-Observer), a low-level GVRP protocol diagnostic an admin would only need when debugging why dynamic VLAN registration is stuck.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.2.1.2 snmpwalk -v2c -c public <target> HP-ICF-BRIDGE::hpicfApplicantStateMachine
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.2.1.2.1 snmpget -v2c -c public <target> HP-ICF-BRIDGE::hpicfApplicantStateMachine.1
Start monitoring HP ProCurve switch (802.1D/Q bridge/STP extensions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-BRIDGE::hpicfApplicantStateMachine OID value, configure state conditions and alerts, and monitor any HP ProCurve switch (802.1D/Q bridge/STP extensions) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.12 | hpicfBridge | HP-ICF-BRIDGE |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1 | hpicfBridgeObjects | HP-ICF-BRIDGE |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.2 | hpicfBridgeGvrp | HP-ICF-BRIDGE |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.2 | hpicfBridgeGvrpStateMachineTable | HP-ICF-BRIDGE |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.2.1 | hpicfBridgeGvrpStateMachineEntry | HP-ICF-BRIDGE |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.2.1.2 | hpicfApplicantStateMachine | HP-ICF-BRIDGE |