HP-ICF-BYOD-MIB

All MIBs › HP-ICF-BYOD-MIB

Organization: HP Networking

Last Updated: 2014-05-19

Category: Domain: Security, Technology: Wireless, Vendor: HP/HPE, Wireless and WLAN

Description: HP ICF SNMP MIB for Bring Your Own Device (BYOD) policy enforcement and device onboarding management on HP ProCurve switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HP-ICF-BYOD-MIB?

HP-ICF-BYOD-MIB is part of HP's Integrated Communication Facility (ICF) enterprise MIB suite for HP ProCurve/Aruba-heritage switches, covering the Bring Your Own Device (BYOD) feature that governs policy enforcement and onboarding for employee/guest devices connecting to the network. It exposes configuration objects controlling BYOD policy behavior and per-device or per-port onboarding/registration state, letting an administrator manage how unmanaged devices are authenticated and assigned network access. As a policy/feature-configuration MIB it is primarily useful for confirming that BYOD enforcement is enabled and correctly configured on a switch, rather than for hardware health monitoring, though device onboarding still depends on overall system health. It complements HP's broader ICF authentication/NAC MIB family (802.1X, MAC authentication) as part of the same access-control framework. It is deployed on HP/Aruba ProCurve access-layer switches supporting BYOD in campus or education network environments, and administrators can download the HP-ICF-BYOD-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HP-ICF-BYOD-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP ProCurve/Aruba-heritage access switches

Monitoring Examples

No concrete object or table names were supplied for this MIB beyond its general description, so specific OIDs can't be cited without inventing them. In practice, an administrator would check the module's BYOD enable/policy objects to confirm the feature is active on a given switch, and per-port onboarding state would reveal whether personal devices are being correctly classified and assigned network access.

What Can Be Monitored

BYOD feature enable state
device onboarding policy configuration
per-port BYOD enforcement status

Imported Objects

From HP-ICF-OID

hpSwitch

OBJECT-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus

How to Use in IPNetwork Monitor

Example using hpicfByodTcpStatsTotalOpen OID:

Select an HP ProCurve/Aruba-heritage access switch (BYOD policy) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hpicfByodTcpStatsTotalOpen into the Find box to locate it in the OID tree, then select it and click OK. This object provides the cumulative total of TCP connections opened. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpicfByodMIB	1.3.6.1.4.1.11.2.14.11.5.1.106			This MIB module describes objects for managing the Bring Your Own Device feature of devices in the HP Integrated Communication Facility product line.
hpicfByodNotifications	1.3.6.1.4.1.11.2.14.11.5.1.106.0
hpicfByodObjects	1.3.6.1.4.1.11.2.14.11.5.1.106.1
hpicfByodConfigObjects	1.3.6.1.4.1.11.2.14.11.5.1.106.1.1
hpicfByodScalarConfig	1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.1
hpicfByodPortalTable	1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.2		not-accessible	A table of portal servers that BYOD clients can be redirected to. The total number of servers supported is implementation-dependent.
hpicfByodPortalEntry	1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.2.1		not-accessible	An entry in the hpicfByodPortalTable.
STR hpicfByodPortalName	1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.2.1.1	DisplayString	not-accessible	This object provides the BYOD server name.
U32 hpicfByodPortalVlanId	1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.2.1.2	Unsigned32	read-create	This object provides the VLAN ID this portal is associated with. Clients on the specified VLAN will be redirected to this portal. A value of 0 indicates that this portal is not associated with any VLAN.
STR hpicfByodPortalUrl	1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.2.1.3	DisplayString	read-create	This object provides the BYOD server URL to redirect clients to.
IPt hpicfByodPortalInetAddrType	1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.2.1.4	InetAddressType	read-only	This object provides the address family of the value in hpicfByodPortalInetAddr.
IP hpicfByodPortalInetAddr	1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.2.1.5	InetAddress	read-only	This object provides the IP address of the BYOD server specified in hpicfByodPortalUrl.
TIK hpicfByodPortalDnsCacheTime	1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.2.1.6	TimeTicks	read-only	This object provides the DNS cache time of this portal in seconds.
ROW hpicfByodPortalRowStatus	1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.2.1.7	RowStatus	read-create	The status of this table entry. The following columns must be set before the row can be made active: - hpicfByodPortalUrl
hpicfByodFreeRuleTable	1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.3		not-accessible	A table of rules to permit other valid traffic such as DNS and DHCP on a BYOD VLAN. The total number of entries allowed is implementation-dependent.
hpicfByodFreeRuleEntry	1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.3.1		not-accessible	An entry in the hpicfByodFreeRuleTable.
U32 hpicfByodFreeRuleNumber	1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.3.1.1	Unsigned32	not-accessible	This object provides the rule number.
INT hpicfByodFreeRuleSourceProtocol	1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.3.1.2	INTEGER	read-create	This object provides the source protocol to permit.
U32 hpicfByodFreeRuleSourcePort	1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.3.1.3	Unsigned32	read-create	This object provides the TCP or UDP source port to permit.
U32 hpicfByodFreeRuleSourceVlanId	1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.3.1.4	Unsigned32	read-create	This object provides the source VLAN ID to permit.
IPt hpicfByodFreeRuleSourceInetAddrType	1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.3.1.5	InetAddressType	read-create	This object provides the address family of the value in hpicfByodFreeRuleSourceInetAddr. Some agents may limit the type to IPv4 only.
IP hpicfByodFreeRuleSourceInetAddr	1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.3.1.6	InetAddress	read-create	This object provides the source IP address to permit.
IP hpicfByodFreeRuleSourceInetAddrMask	1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.3.1.7	InetAddress	read-create	This object provides the source IP address mask to apply to hpicfByodFreeRuleSourceInetAddr.
INT hpicfByodFreeRuleDestinationProtocol	1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.3.1.8	INTEGER	read-create	This object provides the destination protocol to permit.
U32 hpicfByodFreeRuleDestinationPort	1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.3.1.9	Unsigned32	read-create	This object provides the TCP or UDP destination port to permit.
IPt hpicfByodFreeRuleDestinationInetAddrType	1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.3.1.10	InetAddressType	read-create	This object provides the address family of the value in hpicfByodFreeRuleDestinationInetAddr. Some agents may limit the type to IPv4 only.
IP hpicfByodFreeRuleDestinationInetAddr	1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.3.1.11	InetAddress	read-create	This object provides the destination IP address to permit.
IP hpicfByodFreeRuleDestinationInetAddrMask	1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.3.1.12	InetAddress	read-create	This object provides the destination IP address mask to apply to hpicfByodFreeRuleDestinationInetAddr.
ROW hpicfByodFreeRuleRowStatus	1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.3.1.13	RowStatus	read-create	The status of this table entry. The following columns must be set before the row can be made active: - hpicfByodFreeRuleSourceVlanId - hpicfByodFreeRuleSourceInetAddrType - hpicfByodFreeRuleSourceInetAddr - hpicfByodFreeRuleSourceInetAddrMask - hpicfByodFreeRuleDestinationInetAddrType - hpicfByodFreeRuleDestinationInetAddr - hpicfByodFreeRuleDestinationInetAddrMask
hpicfByodStatsObjects	1.3.6.1.4.1.11.2.14.11.5.1.106.1.2
hpicfByodScalarStats	1.3.6.1.4.1.11.2.14.11.5.1.106.1.2.1
C32 hpicfByodTcpStatsTotalOpenEx	1.3.6.1.4.1.11.2.14.11.5.1.106.1.2.1.1	Counter32	read-only	This object provides the cumulative total of TCP connections opened.
C32 hpicfByodTcpStatsResetConn	1.3.6.1.4.1.11.2.14.11.5.1.106.1.2.1.2	Counter32	read-only	This object provides the cumulative total number of TCP connections reset with RST.
C32 hpicfByodTcpStatsCurrentOpen	1.3.6.1.4.1.11.2.14.11.5.1.106.1.2.1.3	Counter32	read-only	This object provides the number of TCP connections currently open.
C32 hpicfByodTcpStatsPktsReceived	1.3.6.1.4.1.11.2.14.11.5.1.106.1.2.1.4	Counter32	read-only	This object provides the total number of TCP packets received.
C32 hpicfByodTcpStatsPktsSent	1.3.6.1.4.1.11.2.14.11.5.1.106.1.2.1.5	Counter32	read-only	This object provides the total number of TCP packets sent.
C32 hpicfByodTcpStatsHttpPktsSent	1.3.6.1.4.1.11.2.14.11.5.1.106.1.2.1.8	Counter32	read-only	This object provides the total number of HTTP packets sent.
C32 hpicfByodTcpStatsStateSynRcvd	1.3.6.1.4.1.11.2.14.11.5.1.106.1.2.1.9	Counter32	read-only	This object provides the number of TCP connections currently in the SYN_RCVD state.
C32 hpicfByodTcpStatsStateEstablished	1.3.6.1.4.1.11.2.14.11.5.1.106.1.2.1.10	Counter32	read-only	This object provides the number of TCP connections currently in the ESTABLISHED state.
hpicfByodConformance	1.3.6.1.4.1.11.2.14.11.5.1.106.2
hpicfByodCompliances	1.3.6.1.4.1.11.2.14.11.5.1.106.2.1
hpicfByodCompliance1	1.3.6.1.4.1.11.2.14.11.5.1.106.2.1.1			The compliance statement
hpicfByodGroups	1.3.6.1.4.1.11.2.14.11.5.1.106.2.2
hpicfByodConfigGroup	1.3.6.1.4.1.11.2.14.11.5.1.106.2.2.1			A collection of objects providing configuration and status for client redirection to a portal server.
hpicfByodStatsGroup	1.3.6.1.4.1.11.2.14.11.5.1.106.2.2.2			A collection of objects providing statistics about current sessions for Byod.

RFC description

Manages Bring Your Own Device feature on HP Integrated Communication Facility switches.

Start monitoring HP ProCurve/Aruba-heritage access switch (BYOD policy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HP-ICF-BYOD-MIB