All MIBs › HP-ICF-BRIDGE › hpicfBridgeRstpForceVersion
hpicfBridgeRstpForceVersion
Module: HP-ICF-BRIDGE
OID (symbolic): HP-ICF-BRIDGE::hpicfBridgeRstpForceVersion
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The operational mode of the Spanning Tree Protocol.
A value of stpCompatibility (0) indicates that the Spanning Tree Protocol operates in IEEE 802.1d mode on all ports.
A value of rstpOperation (2) indicates that the Spanning Tree Protocol operates in IEEE 802.1w mode on all ports, except for the ports to which bridges are connected. The ports to which bridges are connected operate in IEEE 802.1d mode for backward compatibility.
A value of mstpOperation (3) indicates that the Spanning Tree Protocol operates in IEEE 802.1s mode on all ports, except for the ports to which bridges are connected. The ports to which bridges are connected operate in IEEE 802.1d mode for backward compatibility.
This option is available only if object 'hpicfBridgeRstpProtocolVersion' is set to 'ieee8021s'.
What is hpicfBridgeRstpForceVersion?
Selects which Spanning Tree Protocol version the switch runs on all ports: stpCompatibility(0) forces classic 802.1d everywhere, rstpOperation(2) runs 802.1w RSTP except on ports connected to other bridges, and mstpOperation(3) runs 802.1s MSTP with the same bridge-port exception; an admin sets this when standardizing spanning-tree behavior, and mstpOperation is only selectable once hpicfBridgeRstpProtocolVersion is already set to ieee8021s.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.1 snmpwalk -v2c -c public <target> HP-ICF-BRIDGE::hpicfBridgeRstpForceVersion
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.1.1 snmpget -v2c -c public <target> HP-ICF-BRIDGE::hpicfBridgeRstpForceVersion.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.1.1 i <value>
Start monitoring HP ProCurve switch (802.1D/Q bridge/STP extensions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-BRIDGE::hpicfBridgeRstpForceVersion OID value, configure state conditions and alerts, and monitor any HP ProCurve switch (802.1D/Q bridge/STP extensions) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.12 | hpicfBridge | HP-ICF-BRIDGE |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1 | hpicfBridgeObjects | HP-ICF-BRIDGE |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4 | hpicfBridgeRstp | HP-ICF-BRIDGE |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.1 | hpicfBridgeRstpForceVersion | HP-ICF-BRIDGE |