All MIBs › HP-ICF-BRIDGE › hpicfBridgeLoopProtectEnableTimer
hpicfBridgeLoopProtectEnableTimer
Module: HP-ICF-BRIDGE
OID (symbolic): HP-ICF-BRIDGE::hpicfBridgeLoopProtectEnableTimer
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.1.3
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The time in seconds to wait before re-enabling a port disabled by Loop Protection. When a port is disabled by Loop Protection, a re-enable timer for the port is initialized. If the re-enable timer value is specified as zero seconds the port remains disabled, else the port is re-enabled after the specified time.
What is hpicfBridgeLoopProtectEnableTimer?
Sets how many seconds Loop Protection waits before automatically re-enabling a port it disabled after detecting a loop; a value of zero leaves the port disabled indefinitely, which an admin might choose for a suspect port until they can investigate the wiring by hand.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.1.3 snmpwalk -v2c -c public <target> HP-ICF-BRIDGE::hpicfBridgeLoopProtectEnableTimer
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.1.3.1 snmpget -v2c -c public <target> HP-ICF-BRIDGE::hpicfBridgeLoopProtectEnableTimer.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.1.3.1 i <value>
Start monitoring HP ProCurve switch (802.1D/Q bridge/STP extensions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-BRIDGE::hpicfBridgeLoopProtectEnableTimer OID value, configure state conditions and alerts, and monitor any HP ProCurve switch (802.1D/Q bridge/STP extensions) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.12 | hpicfBridge | HP-ICF-BRIDGE |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1 | hpicfBridgeObjects | HP-ICF-BRIDGE |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5 | hpicfBridgeLoopProtect | HP-ICF-BRIDGE |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.1 | hpicfBridgeLoopProtectBase | HP-ICF-BRIDGE |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.1.3 | hpicfBridgeLoopProtectEnableTimer | HP-ICF-BRIDGE |