All MIBs › HH3C-DOT11-CFG-MIB
Organization: Marconi Corporation PLC.
Last Updated: 2010-09-25
Category: Technology: Wireless, Vendor: H3C/HH3C
Description: Manages 802.11 WLAN radio and SSID configuration parameters on H3C wireless access controllers.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is HH3C-DOT11-CFG-MIB?
HH3C-DOT11-CFG-MIB is an H3C (New H3C Technologies, ORGANIZATION field retains Marconi Corporation PLC heritage text from licensed WLAN AC/tunnel technology) proprietary MIB configuring controller-wide WLAN behavior. Its objects cover global country code, station keepalive/idle timer intervals, broadcast-probe-reply flag, AP scan mode, AC control/data-tunnel security-support flags, auto-AP support/name, persistent naming, interface-trap threshold, monitor/sample intervals, channel-switch-check interval, per-AP user uplimit, AP Layer-2-isolation enable, AP BSSID-support count, DoS-protection enable, max APs per interface, and uplink-tracking/route-collection settings. As a configuration MIB it lets an administrator confirm global WLAN capacity and security settings on an H3C wireless controller. It is deployed on H3C wireless controllers. Engineers can download the HH3C-DOT11-CFG-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in HH3C-DOT11-CFG-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- H3C wireless controllers
Monitoring Examples
An administrator checks hh3cDot11APUserUplimit and hh3cDot11APDoSProtectEnable to confirm per-AP capacity and DoS protection settings on an H3C wireless controller.
What Can Be Monitored
- global WLAN capacity and security configuration
This MIB depends on
Related MIBs
Imported Objects
From HH3C-DOT11-REF-MIB
| Hh3cDot11AuthenType | |
| Hh3cDot11ChannelScopeType | |
| Hh3cDot11CirMode | |
| Hh3cDot11ObjectIDType | |
| Hh3cDot11PreambleType | |
| Hh3cDot11RadioElementIndex | |
| Hh3cDot11RadioScopeType | |
| Hh3cDot11RadioType | |
| Hh3cDot11SSIDEncryptModeType | |
| Hh3cDot11SSIDStringType | |
| Hh3cDot11SecIEStatusType | |
| Hh3cDot11ServicePolicyIDType | |
| Hh3cDot11TunnelSecSchemType | |
| Hh3cDot11TxPwrLevelScopeType | |
| Hh3cDot11WorkMode | |
| hh3cDot11 | MODULE-IDENTITY |
| hh3cDot11APElementIndex | OBJECT-TYPE |
From INET-ADDRESS-MIB
| InetAddress |
From RFC1213-MIB
| ifIndex |
From SNMPv2-SMI
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DateAndTime | |
| DisplayString | |
| MacAddress | |
| RowStatus | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| hh3cDot11CFG | 1.3.6.1.4.1.25506.2.75.4 | This MIB provides information about WLAN configuration. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Fat AP Applied in the home, SOHO and so on, and it could work independently without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associating with the AP. Radio The chip set to receive and send wireless signal. Association The service used to establish access point or station mapping and enable station invocation of the distribution system services. (Wireless clients attempt to connect to access points.) Basic Rate A data rate that is mandatory for client devices to support in order for them to achieve successful association. MSDU MAC Service Data Unit, it is frame format defined by 802.11. TU It is 1,024 microseconds (ms), which is about 1 millisecond. AKM The authentication and key management method defined by 802.11i, and which includes 802.1x and pre-shared key. | ||
| hh3cDot11GlobeConfigGroup | 1.3.6.1.4.1.25506.2.75.4.1 | |||
| OCT hh3cDot11GlobalCountryCode | 1.3.6.1.4.1.25506.2.75.4.1.1 | OCTET STRING | read-write | Represents the country code for wireless network. |
| U32 hh3cDot11StaKeepALiveTimerIntvl | 1.3.6.1.4.1.25506.2.75.4.1.2 | Unsigned32 | read-write | Represents the interval of the keep alive requests sent between AP and STA. Default value 0 : The keep alive function is disabled. |
| I32 hh3cDot11StaIdleTimerIntvl | 1.3.6.1.4.1.25506.2.75.4.1.3 | Integer32 | read-write | Represents the interval for which the link between AP and STA ( power-save or awake ) can be idle. |
| T/F hh3cDot11BroadcastProbeReply | 1.3.6.1.4.1.25506.2.75.4.1.4 | TruthValue | read-write | Represents enable the AP to reply broadcast probe or not. 'true' : The AP to reply broadcast probe is enabled. 'false': The AP to reply broadcast probe is disabled |
| INT hh3cDot11APScanMode | 1.3.6.1.4.1.25506.2.75.4.1.5 | INTEGER | read-write | Represents the scanning mode for AP. The following values are supported: active(1), - AP will actively do scan. passive(2) - AP will passively do scan. |
| HH3 hh3cDot11ACCtrlTunnelSecSupport | 1.3.6.1.4.1.25506.2.75.4.1.6 | Hh3cDot11TunnelSecSchemType | read-write | Represents what security schemes are supported for CAPWAP Control tunnel. |
| HH3 hh3cDot11ACDataTunnelSecSupport | 1.3.6.1.4.1.25506.2.75.4.1.7 | Hh3cDot11TunnelSecSchemType | read-write | Represents what security schemes are supported for CAPWAP data tunnel. The cleartxt is the default scheme. |
| T/F hh3cDot11ACAutoAPSupport | 1.3.6.1.4.1.25506.2.75.4.1.8 | TruthValue | read-write | Represents enable the auto AP functionality or not. 'true' : The auto AP functionality is enabled. 'false': The auto AP functionality is disabled |
| OCT hh3cDot11AutoAPName | 1.3.6.1.4.1.25506.2.75.4.1.9 | OCTET STRING | read-write | Represents the name of auto AP which need to be made persistent. When read the value from the node, NULL value be returned. |
| OCT hh3cDot11PersistentName | 1.3.6.1.4.1.25506.2.75.4.1.10 | OCTET STRING | read-write | Represents the new name of auto AP after being made persistent. When read the value from the node, NULL value be returned. |
| I32 hh3cDot11IntfTrapThreshold | 1.3.6.1.4.1.25506.2.75.4.1.11 | Integer32 | read-write | Represents threshold of interference trap. If signal strength of the device exceeds this threshold, corresponding trap will be sent. |
| U32 hh3cDot11MonitorInterval | 1.3.6.1.4.1.25506.2.75.4.1.12 | Unsigned32 | read-write | Represents the monitoring interval. Default value 0 : The monitoring functionality is changed to real-time mode. |
| U32 hh3cDot11SampleInterval | 1.3.6.1.4.1.25506.2.75.4.1.13 | Unsigned32 | read-write | Represents the sampling interval. Default value 0 : The sampling functionality is disabled. |
| U32 hh3cDot11ChnlSwitChkInterval | 1.3.6.1.4.1.25506.2.75.4.1.14 | Unsigned32 | read-write | Represents the checking interval of channel switch. |
| U32 hh3cDot11APUserUplimit | 1.3.6.1.4.1.25506.2.75.4.1.15 | Unsigned32 | read-write | Represents the upper limit of user which has access to this AP. |
| T/F hh3cDot11APL2IsolateEnable | 1.3.6.1.4.1.25506.2.75.4.1.16 | TruthValue | read-write | Represents enable the layer2 isolation or not. 'true' : The layer2 isolation functionality is enabled. 'false': The layer2 isolation functionality is disabled. |
| I32 hh3cDot11APBSSIDSupportNum | 1.3.6.1.4.1.25506.2.75.4.1.17 | Integer32 | read-only | Represents the max number of BSSID supported by Current AP. |
| DAT hh3cDot11APLastUpdateStatTime | 1.3.6.1.4.1.25506.2.75.4.1.18 | DateAndTime | read-only | Represents date and time update statistic information lately. |
| T/F hh3cDot11APDoSProtectEnable | 1.3.6.1.4.1.25506.2.75.4.1.19 | TruthValue | read-write | Represents enable the DOS protection or not. 'true' : The DOS protection functionality is enabled. 'false': The DOS protection functionality is disabled. |
| U32 hh3cDot11MaxAPPerIf | 1.3.6.1.4.1.25506.2.75.4.1.20 | Unsigned32 | read-write | Represents max AP number that can be connected to AC interface. |
| DAT hh3cDot11SampleTimeStamp | 1.3.6.1.4.1.25506.2.75.4.1.21 | DateAndTime | read-only | Represents the start time of current sample period. |
| U32 hh3cDot11UplinkTrackId | 1.3.6.1.4.1.25506.2.75.4.1.22 | Unsigned32 | read-write | Represents the track id of AP. Default value 0 : The uplink track function for AP is disabled. |
| T/F hh3cDot11RtCollectSwitch | 1.3.6.1.4.1.25506.2.75.4.1.23 | TruthValue | read-write | This object is used to turn on/off real-time statistics collection between AC and AP. If the value is true, hh3cDot11RtCollectIntvl will take effect. Otherwise, hh3cDot11RglCollectIntvl will take effect. |
| I32 hh3cDot11RglCollectIntvl | 1.3.6.1.4.1.25506.2.75.4.1.24 | Integer32 | read-write | This object represents interval to regularly collect statistics from AC to AP. |
| I32 hh3cDot11RtCollectIntvl | 1.3.6.1.4.1.25506.2.75.4.1.25 | Integer32 | read-write | This object represents interval to collect real-time statistics from AC to AP. |
| I32 hh3cDot11AllAPCpuUsageThreshold | 1.3.6.1.4.1.25506.2.75.4.1.26 | Integer32 | read-write | The CPU usage threshold for all AP. |
| I32 hh3cDot11AllAPMemUsageThreshold | 1.3.6.1.4.1.25506.2.75.4.1.27 | Integer32 | read-write | The memory usage threshold for all AP. |
| I32 hh3cDot11AdjIntfTrapThreshold | 1.3.6.1.4.1.25506.2.75.4.1.28 | Integer32 | read-write | Represents threshold of adjacent interference trap. If signal strength of the device exceeds this threshold, corresponding trap will be sent. |
| hh3cDot11PolicyConfigGroup | 1.3.6.1.4.1.25506.2.75.4.2 | |||
| hh3cDot11RadioPolicyTable | 1.3.6.1.4.1.25506.2.75.4.2.1 | not-accessible | The table defines the parameters for radio policy, as per radio policy of CLI. One radio policy could be assigned to the different radios (AP). | |
| hh3cDot11RadioPolicyEntry | 1.3.6.1.4.1.25506.2.75.4.2.1.1 | not-accessible | Each entry contains information of each radio policy. | |
| OCT hh3cDot11RadioPolicyName | 1.3.6.1.4.1.25506.2.75.4.2.1.1.1 | OCTET STRING | not-accessible | Represents the name of radio policy. |
| I32 hh3cDot11BeaconInterval | 1.3.6.1.4.1.25506.2.75.4.2.1.1.2 | Integer32 | read-create | Represents the interval for Beacon management frame. |
| I32 hh3cDot11DtimInterval | 1.3.6.1.4.1.25506.2.75.4.2.1.1.3 | Integer32 | read-create | Represents the number of beacon intervals that shall elapse between transmission of Beacons frames containing a Traffic Indication Map (TIM) element whose DTIM Count field is 0. This value is transmitted in the Delivery TIM (DTIM) Period field of Beacon frames. |
| I32 hh3cDot11RtsThreshold | 1.3.6.1.4.1.25506.2.75.4.2.1.1.4 | Integer32 | read-create | Represents the current minimum size,in octets,of the MAC protocol data unit (MPDU), below which a Request to send/Clear to send (RTS/CTS) handshake shall not be performed. |
| I32 hh3cDot11FragThreshold | 1.3.6.1.4.1.25506.2.75.4.2.1.1.5 | Integer32 | read-create | Represents the current maximum size, in octets, of the MPDU that may be delivered to the PHY. A MSDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers. |
| I32 hh3cDot11ShortRetryThreshold | 1.3.6.1.4.1.25506.2.75.4.2.1.1.6 | Integer32 | read-create | Represents the maximum number of transmission attempts of a frame, the length of which is less than or equal to hh3cDot11RTSThreshold, that shall be made before a failure condition is indicated. |
| I32 hh3cDot11LongRetryThreshold | 1.3.6.1.4.1.25506.2.75.4.2.1.1.7 | Integer32 | read-create | Represents the maximum number of transmission attempts of a frame, the length of which is longer than hh3cDot11RTSThreshold, that shall be made before a failure condition is indicated. |
| U32 hh3cDot11MaxRxLifetime | 1.3.6.1.4.1.25506.2.75.4.2.1.1.8 | Unsigned32 | read-create | Represents the elapsed time. After the time specified by hh3cDot11MaxRxLifetime, the further attempts to reassemble the MSDU shall be terminated. |
| ROW hh3cDot11RdoPolicyRowStatus | 1.3.6.1.4.1.25506.2.75.4.2.1.1.9 | RowStatus | read-create | The status of this table entry. |
| I32 hh3cDot11RdoClientMaxCount | 1.3.6.1.4.1.25506.2.75.4.2.1.1.10 | Integer32 | read-create | Represent the maximum number of stations supported by this radio policy. |
| I32 hh3cDot11BeaconIntervalMs | 1.3.6.1.4.1.25506.2.75.4.2.1.1.11 | Integer32 | read-create | Represents the interval for Beacon management frame. |
| hh3cDot11ServicePolicyTable | 1.3.6.1.4.1.25506.2.75.4.2.2 | not-accessible | The table defines the parameters for ESS, as per service policy of CLI. One service policy could be assigned to the different radios (AP). | |
| hh3cDot11ServicePolicyEntry | 1.3.6.1.4.1.25506.2.75.4.2.2.1 | not-accessible | Each entry contains information of each service policy. | |
| HH3 hh3cDot11ServicePolicyID | 1.3.6.1.4.1.25506.2.75.4.2.2.1.1 | Hh3cDot11ServicePolicyIDType | not-accessible | Represents the ID of each service policy. |
| STR hh3cDot11SSIDName | 1.3.6.1.4.1.25506.2.75.4.2.2.1.2 | Hh3cDot11SSIDStringType | read-create | Represents the ESS. As per CLI, the value of service policy name will be SSID. |
| T/F hh3cDot11SSIDHidden | 1.3.6.1.4.1.25506.2.75.4.2.2.1.3 | TruthValue | read-create | This attribute controls whether the SSID will be advertised in the beacon frame. If it is true, then SSID will not be advertised in the beacon frame. |
| HH3 hh3cDot11AuthenMode | 1.3.6.1.4.1.25506.2.75.4.2.2.1.4 | Hh3cDot11AuthenType | read-create | Represents the Authentication mode defined by 802.11. |
| HH3 hh3cDot11SSIDEncryptionMode | 1.3.6.1.4.1.25506.2.75.4.2.2.1.5 | Hh3cDot11SSIDEncryptModeType | read-create | Represents the encryption mode for this ESS. |
| OCT hh3cDot11WlanInfBindingType | 1.3.6.1.4.1.25506.2.75.4.2.2.1.6 | OCTET STRING | read-create | Represents the service policy will bind to what kind of data forwarding interface. |
| I32 hh3cDot11WlanInfBindingID | 1.3.6.1.4.1.25506.2.75.4.2.2.1.7 | Integer32 | read-create | Represents the interface ID of the interface that ESS will bind to. If the value is set to -1, the binding will be removed. |
| ROW hh3cDot11SrvPolicyRowStatus | 1.3.6.1.4.1.25506.2.75.4.2.2.1.8 | RowStatus | read-create | The status of this table entry. |
| I32 hh3cDot11ClientMaxCount | 1.3.6.1.4.1.25506.2.75.4.2.2.1.9 | Integer32 | read-create | Represent the maximum number of stations supported by this service policy. |
| HH3 hh3cDot11SPInCirMode | 1.3.6.1.4.1.25506.2.75.4.2.2.1.10 | Hh3cDot11CirMode | read-create | CIR(committed information rate) mode of inbound direction. This object is useful only when the corresponding CIR is nonzero. If value of this object is changed, corresponding CIR will be reset. |
| I32 hh3cDot11SPInCirValue | 1.3.6.1.4.1.25506.2.75.4.2.2.1.11 | Integer32 | read-create | Represents the CIR of inbound direction of this service policy. If the value is 0, it means that no flow control is applied to the service policy, and the corresponding CIR mode is meaningless. |
| HH3 hh3cDot11SPOutCirMode | 1.3.6.1.4.1.25506.2.75.4.2.2.1.12 | Hh3cDot11CirMode | read-create | CIR(committed information rate) mode of outbound direction. This object is useful only when the corresponding CIR is nonzero. If value of this object is changed, corresponding CIR will be reset. |
| I32 hh3cDot11SPOutCirValue | 1.3.6.1.4.1.25506.2.75.4.2.2.1.13 | Integer32 | read-create | Represents the CIR of outbound direction of this service policy. If the value is 0, it means that no flow control is applied to the service policy, and the corresponding CIR mode is meaningless. |
| I32 hh3cDot11WlanInfPVID | 1.3.6.1.4.1.25506.2.75.4.2.2.1.14 | Integer32 | read-create | Represents the VLAN ID of SSID. |
| I32 hh3cDot11SPInCirStaticValue | 1.3.6.1.4.1.25506.2.75.4.2.2.1.15 | Integer32 | read-create | Represents the CIR of inbound direction for static CIR mode. |
| I32 hh3cDot11SPOutCirStaticValue | 1.3.6.1.4.1.25506.2.75.4.2.2.1.16 | Integer32 | read-create | Represents the CIR of outbound direction for static CIR mode. |
| T/F hh3cDot11SPIsolate | 1.3.6.1.4.1.25506.2.75.4.2.2.1.17 | TruthValue | read-create | If it is true, then stations connected with the service policy are isolated. |
| hh3cDot11ServicePolicyExtTable | 1.3.6.1.4.1.25506.2.75.4.2.3 | not-accessible | The table defines the parameters for ESS, as per service policy of CLI. When the value of hh3cDot11SSIDEncryptionMode equals to cipher(2), more configuration for a ESS will be put into the table. | |
| hh3cDot11ServicePolicyExtEntry | 1.3.6.1.4.1.25506.2.75.4.2.3.1 | not-accessible | Each entry contains information of each service policy under cipher(2) mode. | |
| HH3 hh3cDot11ServicePolicyExtID | 1.3.6.1.4.1.25506.2.75.4.2.3.1.1 | Hh3cDot11ServicePolicyIDType | not-accessible | Represents the ID of each service policy. |
| HH3 hh3cDot11SecIEStatus | 1.3.6.1.4.1.25506.2.75.4.2.3.1.2 | Hh3cDot11SecIEStatusType | read-create | To enable the security Information element in the beacon and probe response frames sent by AP. |
| INT hh3cDot11SecurityCiphers | 1.3.6.1.4.1.25506.2.75.4.2.3.1.3 | INTEGER | read-create | The WLAN system support the following cipher type for data frame encryption. wep40(2) tkip(4) aesccmp(16) wep104(32) wpisms4(64) wep128(128) For each service policy,it could support multiple cipher types at the same time.So the value of object could combine multiple value of cipher type above. When the value of node equals to zero, it means no configuration or undo operation. |
| INT hh3cDot11CipherKeyIndex | 1.3.6.1.4.1.25506.2.75.4.2.3.1.4 | INTEGER | read-create | Represents the key index of cipher key for packet. When hh3cDot11SecurityCiphers value is wep40 or wep104, the configuration will take effective. |
| OCT hh3cDot11CipherKey | 1.3.6.1.4.1.25506.2.75.4.2.3.1.5 | OCTET STRING | read-create | Represents the cipher key for packet. When hh3cDot11SecurityCiphers value is wep40 or wep104, the configuration will take effective. |
| ROW hh3cDot11SrvPolicyExtRowStatus | 1.3.6.1.4.1.25506.2.75.4.2.3.1.6 | RowStatus | read-create | The status of this table entry. |
| INT hh3cDot11CipherKeyType | 1.3.6.1.4.1.25506.2.75.4.2.3.1.7 | INTEGER | read-create | Represents the cipher key type of hh3cDot11CipherKey. |
| hh3cDot11RadioPolicyExtTable | 1.3.6.1.4.1.25506.2.75.4.2.4 | not-accessible | The table defines the radio policy of each radio. It can't be modified if the radio policy is a default radio policy. | |
| hh3cDot11RadioPolicyExtEntry | 1.3.6.1.4.1.25506.2.75.4.2.4.1 | not-accessible | Each entry contains information of each radio policy. | |
| OCT hh3cDot11RPAPSerialID | 1.3.6.1.4.1.25506.2.75.4.2.4.1.1 | OCTET STRING | not-accessible | This object represents the Serial ID of AP. |
| HH3 hh3cDot11RPRadioID | 1.3.6.1.4.1.25506.2.75.4.2.4.1.2 | Hh3cDot11RadioScopeType | not-accessible | This object represents each radio. |
| I32 hh3cDot11RPBeaconInterval | 1.3.6.1.4.1.25506.2.75.4.2.4.1.3 | Integer32 | read-write | This object represents the interval for Beacon management frame. |
| I32 hh3cDot11RPDtimInterval | 1.3.6.1.4.1.25506.2.75.4.2.4.1.4 | Integer32 | read-write | This object represents the number of beacon intervals that shall elapse between transmissions of Beacons frames containing a Traffic Indication Map (TIM) element whose DTIM count field is 0. This value is transmitted in the Delivery TIM (DTIM) Period field of Beacon frames. |
| I32 hh3cDot11RPRtsThreshold | 1.3.6.1.4.1.25506.2.75.4.2.4.1.5 | Integer32 | read-write | This object represents the current minimum size, in octets, of the MAC protocol data unit (MPDU), below which a Request to send/Clear to send (RTS/CTS) handshake shall not be performed. |
| I32 hh3cDot11RPFragThreshold | 1.3.6.1.4.1.25506.2.75.4.2.4.1.6 | Integer32 | read-write | This object represents the current maximum size, in octets, of the MPDU that may be delivered to the PHY. A MSDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers. |
| I32 hh3cDot11RPShortRetryThreshold | 1.3.6.1.4.1.25506.2.75.4.2.4.1.7 | Integer32 | read-write | This object represents the maximum number of transmission attempts of a frame, the length of which is less than or equal to hh3cDot11RTSThreshold, that shall be made before a failure condition is indicated. |
| I32 hh3cDot11RPLongRetryThreshold | 1.3.6.1.4.1.25506.2.75.4.2.4.1.8 | Integer32 | read-write | This object represents the maximum number of transmission attempts of a frame, the length of which is longer than hh3cDot11RTSThreshold, and that shall be made before a failure condition is indicated. |
| I32 hh3cDot11RPClientMaxCount | 1.3.6.1.4.1.25506.2.75.4.2.4.1.9 | Integer32 | read-write | This object represents the maximum number of stations supported by this radio policy. |
| hh3cDot11SrvPortSecurityTable | 1.3.6.1.4.1.25506.2.75.4.2.5 | not-accessible | This table defines the WLAN security status for ESS, BSS and WLAN-Ethernet interface which binding the crypto service-template. Otherwise, when binding the clear service-template, hh3cPortSecurityTables should be used to configure port security. | |
| hh3cDot11SrvPortSecurityEntry | 1.3.6.1.4.1.25506.2.75.4.2.5.1 | not-accessible | There is a row in this table for service policy. | |
| HH3 hh3cDot11SecurityServicePolicyID | 1.3.6.1.4.1.25506.2.75.4.2.5.1.1 | Hh3cDot11ServicePolicyIDType | not-accessible | Represents the ID of each service policy. |
| INT hh3cDot11SrvPortSecurityMode | 1.3.6.1.4.1.25506.2.75.4.2.5.1.2 | INTEGER | read-write | Determines the security modes of the WLAN port. noRestrictions(1) The default value,no any security mode is set. userLoginSecureExt(2) Access to the port is denied until the port client is authorized (by 802.1X). psk(3) Access to the port is denied until the port client is authorized (by 802.1X key negotiation). macAddressAndPsk(4) The MAC address is first authenticated and only if this succeeds does the psk then attempt user authentication. userLoginSecureExtOrPsk(5) This selects both the userLoginSecureExt and psk modes together such that either is allowed to authorized access. Which mode works for client depends on the client's choice. wapi(6) Access to the port is denied until the port client is authenticated (by WAPI). |
| INT hh3cDot11SrvSecurityKeyType | 1.3.6.1.4.1.25506.2.75.4.2.5.1.3 | INTEGER | read-write | This indicates the key type in the 802.1X EAPOL_Key packet. userLoginTxKeyTypeNone(1) This means the key type is not set yet. userLoginTxKeyTypeDot11Key(2) This selects the 802.11 key type. userLoginTxKeyTypeRsaRC4Key(3) This selects the RC4 key for RSA RC4 session encryption. |
| INT hh3cDot11SrvSecurityPskKeyMode | 1.3.6.1.4.1.25506.2.75.4.2.5.1.4 | INTEGER | read-write | This is the password input mode. When input as pskKeyModePassPhrase, hh3cDot11SrvSecurityPskKeyString must be 8 to 63 characters; when input as pskKeyModeRawKey, hh3cDot11SrvSecurityPskKeyString must be 64 characters and each character must be '0'-'9', 'a'-'f' and 'A'-'F'. |
| STR hh3cDot11SrvSecurityPskKeyString | 1.3.6.1.4.1.25506.2.75.4.2.5.1.5 | DisplayString | read-write | This is the password string used for psk authentication. |
| hh3cDot11SrvPolicyExtendTable | 1.3.6.1.4.1.25506.2.75.4.2.6 | not-accessible | The table defines the parameters of each service policy. | |
| hh3cDot11SrvPolicyExtendEntry | 1.3.6.1.4.1.25506.2.75.4.2.6.1 | not-accessible | Each entry contains information of each service policy. | |
| INT hh3cDot11SPEnable | 1.3.6.1.4.1.25506.2.75.4.2.6.1.1 | INTEGER | read-write | Represents whether the service policy is enabled. |
| hh3cDot11APConfigGroup | 1.3.6.1.4.1.25506.2.75.4.3 | |||
| hh3cDot11APTemplateTable | 1.3.6.1.4.1.25506.2.75.4.3.1 | not-accessible | By AP template CLI, administrator will configure the parameters of AP by convenience. Before AP boot up and connect to AC by CAPWAP tunnel, administrator will create AP template for each AP. When AP connect to AC, AC will assign configuration to AP by hh3cDot11APSerialID information in AP template. | |
| hh3cDot11APTemplateEntry | 1.3.6.1.4.1.25506.2.75.4.3.1.1 | not-accessible | Each entry contains configuration information for each AP. | |
| OCT hh3cDot11APTemplateName | 1.3.6.1.4.1.25506.2.75.4.3.1.1.1 | OCTET STRING | not-accessible | Represents the name of AP template. |
| OCT hh3cDot11APSerialID | 1.3.6.1.4.1.25506.2.75.4.3.1.1.2 | OCTET STRING | read-create | Represents AP serial id. |
| OCT hh3cDot11TemplateAPModelAlias | 1.3.6.1.4.1.25506.2.75.4.3.1.1.3 | OCTET STRING | read-create | Represents the alias of AP model name. |
| OCT hh3cDot11Description | 1.3.6.1.4.1.25506.2.75.4.3.1.1.4 | OCTET STRING | read-create | This attribute will give more information about AP. Administrator could suggest the location, owner or other information for each AP. If the value is set to NULL, the description will be removed. |
| INT hh3cDot11APWorkMode | 1.3.6.1.4.1.25506.2.75.4.3.1.1.5 | INTEGER | read-create | Represents what work mode for AP. The following values are supported: normal(1), - AP will supply WLAN service. monitor(2) - AP will be a monitor to find attack. semiMonitor(3) - AP will supply WLAN service and Device detection is enabled. |
| ROW hh3cDot11APTemplateRowStatus | 1.3.6.1.4.1.25506.2.75.4.3.1.1.6 | RowStatus | read-create | The status of this table entry. |
| OCT hh3cDot11APName | 1.3.6.1.4.1.25506.2.75.4.3.1.1.7 | OCTET STRING | read-create | Represents the AP name. |
| I32 hh3cDot11StatisInterv | 1.3.6.1.4.1.25506.2.75.4.3.1.1.8 | Integer32 | read-create | Represents the interval of radio statistic. |
| T/F hh3cDot11APBroadcastProbeReply | 1.3.6.1.4.1.25506.2.75.4.3.1.1.9 | TruthValue | read-create | Represents enable the AP to reply broadcast probe or not. 'true' : The AP to reply broadcast probe is enabled. 'false': The AP to reply broadcast probe is disabled |
| I32 hh3cDot11StaIdleTimerInterv | 1.3.6.1.4.1.25506.2.75.4.3.1.1.10 | Integer32 | read-create | Represents the interval for which the link between AP and STA ( power-save or awake ) can be idle. |
| I32 hh3cDot11StaKeepAliveTimerInterv | 1.3.6.1.4.1.25506.2.75.4.3.1.1.11 | Integer32 | read-create | Represents the interval of the keep alive requests sent between AP and STA. |
| I32 hh3cDot11APCir | 1.3.6.1.4.1.25506.2.75.4.3.1.1.12 | Integer32 | read-create | Represents the committed information rate between AP and AC. |
| I32 hh3cDot11APCbs | 1.3.6.1.4.1.25506.2.75.4.3.1.1.13 | Integer32 | read-create | Represents the committed burst size between AP and AC. |
| I32 hh3cDot11APPriorityLevel | 1.3.6.1.4.1.25506.2.75.4.3.1.1.14 | Integer32 | read-create | This object represents the connection priority for the AP. If the connection priority is 7, the AC is considered as the primary AC for the AP. |
| I32 hh3cDot11APElementID | 1.3.6.1.4.1.25506.2.75.4.3.1.1.15 | Integer32 | read-only | This object represents the AP element ID. |
| T/F hh3cDot11APDevDetectEnable | 1.3.6.1.4.1.25506.2.75.4.3.1.1.16 | TruthValue | read-create | Represents whether device detection is enabled or not. 'true' : Device detection is enabled. 'false': Device detection is disabled. If device detection is enabled, the AP will provide both device detection and WLAN data services. By default, the AP only provides WLAN data services. When an AP works in monitor mode, that is, the value of object hh3cDot11APWorkMode is monitor, device detection can not be enabled with object hh3cDot11APDevDetectEnable. Device detection in normal AP mode can be enabled or disabled only when all radios of the AP are disabled. |
| INT hh3cDot11APGetIPMethod | 1.3.6.1.4.1.25506.2.75.4.3.1.1.17 | INTEGER | read-create | This object represents the method how AP gets IP address. |
| INT hh3cDot11StatisIntervMode | 1.3.6.1.4.1.25506.2.75.4.3.1.1.18 | INTEGER | read-create | This object represents the mode of statics interval. normal(1) - statics interval value between 10s to 120s realtime(2) - statics interval value between 2s to 5s |
| hh3cDot11RadioToConfigTable | 1.3.6.1.4.1.25506.2.75.4.3.2 | not-accessible | Before AP connects to AC, administrator will configure radio parameter to each radio. | |
| hh3cDot11RadioToConfigEntry | 1.3.6.1.4.1.25506.2.75.4.3.2.1 | not-accessible | Each entry contains configuration information for each radio. | |
| OCT hh3cDot11APTemplateNameCfg | 1.3.6.1.4.1.25506.2.75.4.3.2.1.1 | OCTET STRING | not-accessible | Represents the name of AP template. |
| HH3 hh3cDot11CfgRadioID | 1.3.6.1.4.1.25506.2.75.4.3.2.1.2 | Hh3cDot11RadioScopeType | not-accessible | Represents each radio. |
| OCT hh3cDot11CfgRadioPolicyName | 1.3.6.1.4.1.25506.2.75.4.3.2.1.3 | OCTET STRING | read-write | Represents the name of radio policy. |
| HH3 hh3cDot11CfgRadioType | 1.3.6.1.4.1.25506.2.75.4.3.2.1.4 | Hh3cDot11RadioType | read-write | Represents the radio will work with which 802.11 radio type. |
| HH3 hh3cDot11CfgChannel | 1.3.6.1.4.1.25506.2.75.4.3.2.1.5 | Hh3cDot11ChannelScopeType | read-write | Represents the channel allocation of radio. |
| HH3 hh3cDot11CfgMaxTxPowerLevel | 1.3.6.1.4.1.25506.2.75.4.3.2.1.6 | Hh3cDot11TxPwrLevelScopeType | read-write | Represents the maximal transmit power scope for AP. |
| HH3 hh3cDot11PreambleLen | 1.3.6.1.4.1.25506.2.75.4.3.2.1.7 | Hh3cDot11PreambleType | read-write | Represents whether use long or short preamble for 802.11 MAC frame. When hh3cDot11CfgRadioType is either dot11b or dot11g, then value for hh3cDot11PreambleLen will be valid. Othh3cise, the value for it will be invalid. |
| T/F hh3cDot11CfgRadioStatus | 1.3.6.1.4.1.25506.2.75.4.3.2.1.8 | TruthValue | read-write | Represents the radio admin status whether is enabled or disabled. |
| U32 hh3cDot11CfgRdElementID | 1.3.6.1.4.1.25506.2.75.4.3.2.1.9 | Unsigned32 | read-only | Represents the element ID of this radio. It comprises two parts. The highest 24 bits are AP element ID and the lowest 8 bits are radio ID. |
| HH3 hh3cDot11CfgWorkMode | 1.3.6.1.4.1.25506.2.75.4.3.2.1.10 | Hh3cDot11WorkMode | read-write | Represents work mode of the radio. |
| I32 hh3cDot11CfgPwrAttValue | 1.3.6.1.4.1.25506.2.75.4.3.2.1.11 | Integer32 | read-write | Represents the value of power attenuation. |
| INT hh3cDot11RadioTxArithmetic | 1.3.6.1.4.1.25506.2.75.4.3.2.1.12 | INTEGER | read-write | Represents the transmission arithmetic of the radio. The following values are supported: quality(1) - Consider the quality first during the transmission. bandwidth(2) - Consider the bandwidth first during the transmission. |
| INT hh3cDot11CfgChannelLockStat | 1.3.6.1.4.1.25506.2.75.4.3.2.1.13 | INTEGER | read-write | Represents locked status of channel on the radio. |
| INT hh3cDot11CfgPowerLockStat | 1.3.6.1.4.1.25506.2.75.4.3.2.1.14 | INTEGER | read-write | Represents locked status of power on the radio. |
| U32 hh3cDot11CfgLBRdGroupId | 1.3.6.1.4.1.25506.2.75.4.3.2.1.15 | Unsigned32 | read-write | Represents the load balance group ID allocated for the radio. |
| U32 hh3cDot11CfgRRMSDRdGroupId | 1.3.6.1.4.1.25506.2.75.4.3.2.1.16 | Unsigned32 | read-write | Represents the RRM self-decisive group ID allocated for the radio. |
| hh3cDot11APServiceSetTable | 1.3.6.1.4.1.25506.2.75.4.3.3 | not-accessible | For each radio, it could configure multiple service policies. The table describes the relationship between radio and service policies. | |
| hh3cDot11APServiceSetEntry | 1.3.6.1.4.1.25506.2.75.4.3.3.1 | not-accessible | Each entry contains service policy information for each specific radio of AP. | |
| HH3 hh3cDot11CfgServicePolicyID | 1.3.6.1.4.1.25506.2.75.4.3.3.1.1 | Hh3cDot11ServicePolicyIDType | not-accessible | Represents the ID of each service policy used by the AP. |
| ROW hh3cDot11SrvSetRowStatus | 1.3.6.1.4.1.25506.2.75.4.3.3.1.2 | RowStatus | read-create | The status of this table entry. |
| I32 hh3cDot11ServiceSetVlanId | 1.3.6.1.4.1.25506.2.75.4.3.3.1.3 | Integer32 | read-create | Represents the Vlan ID of BSS which is generated when service policy is binded with the Radio. |
| hh3cDot11APSysInfoSetTable | 1.3.6.1.4.1.25506.2.75.4.3.4 | not-accessible | The table of the system information for each AP. | |
| hh3cDot11APSysInfoSetEntry | 1.3.6.1.4.1.25506.2.75.4.3.4.1 | not-accessible | The system information configuration for each AP. | |
| OCT hh3cDot11APSysNetID | 1.3.6.1.4.1.25506.2.75.4.3.4.1.1 | OCTET STRING | read-write | Represents the system Net ID for AP. |
| I32 hh3cDot11APCpuUsageThreshold | 1.3.6.1.4.1.25506.2.75.4.3.4.1.2 | Integer32 | read-write | The CPU usage threshold for AP. |
| I32 hh3cDot11APMemUsageThreshold | 1.3.6.1.4.1.25506.2.75.4.3.4.1.3 | Integer32 | read-write | The memory usage threshold for AP. |
| hh3cDot11APLimitTable | 1.3.6.1.4.1.25506.2.75.4.3.5 | not-accessible | For each connected APs, administrator could configure a series of limits. This table describes the limit information for AP(s). | |
| hh3cDot11APLimitEntry | 1.3.6.1.4.1.25506.2.75.4.3.5.1 | not-accessible | Each entry contains the limit information for each AP. | |
| I32 hh3cDot11APSsidNumLimit | 1.3.6.1.4.1.25506.2.75.4.3.5.1.1 | Integer32 | read-write | Represents the upper limit of service template binded with this AP. All radios of AP share this limit. Default value 0 : There is no upper limit of service template binded with this AP. |
| I32 hh3cDot11APUserCntLimit | 1.3.6.1.4.1.25506.2.75.4.3.5.1.2 | Integer32 | read-write | Represents the upper limit of user which has access to this AP. All BSSs binded with AP share this limit. Default value 0 : There is no upper limit of user which has access to this AP. |
| I32 hh3cDot11APUserThreshold | 1.3.6.1.4.1.25506.2.75.4.3.5.1.3 | Integer32 | read-write | Represents the threshold of user which has access to this AP. All BSSs binded with AP share this limit. If the user counter is overflow, the trap will be sent. Default value 0 : There is no threshold of user which has access to this AP. |
| hh3cDot11APIfSetTable | 1.3.6.1.4.1.25506.2.75.4.3.6 | not-accessible | The table of the interface information for each AP. | |
| hh3cDot11APIfSetEntry | 1.3.6.1.4.1.25506.2.75.4.3.6.1 | not-accessible | The interface information configuration for each AP. | |
| I32 hh3cDot11APSetIfIndex | 1.3.6.1.4.1.25506.2.75.4.3.6.1.1 | Integer32 | not-accessible | Represents the index for a interface. |
| STR hh3cDot11APIfAlias | 1.3.6.1.4.1.25506.2.75.4.3.6.1.2 | DisplayString | read-write | This object is an 'alias' name for the interface as specified by a network manager for AP. |
| hh3cDot11APServiceVlanTable | 1.3.6.1.4.1.25506.2.75.4.3.7 | not-accessible | For all the radios on the AP, it could configure multiple service policies. The table describes the relationship between AP and service policies. | |
| hh3cDot11APServiceVlanEntry | 1.3.6.1.4.1.25506.2.75.4.3.7.1 | not-accessible | Each entry contains service policy information for each AP. | |
| OCT hh3cDot11APServiceVlanSerialID | 1.3.6.1.4.1.25506.2.75.4.3.7.1.1 | OCTET STRING | not-accessible | This object represents AP serial id. |
| HH3 hh3cDot11APServiceVlanSPID | 1.3.6.1.4.1.25506.2.75.4.3.7.1.2 | Hh3cDot11ServicePolicyIDType | not-accessible | This object represents the ID of each service policy used by the AP. |
| I32 hh3cDot11APServiceVlanId | 1.3.6.1.4.1.25506.2.75.4.3.7.1.3 | Integer32 | read-create | This object represents the VLAN ID of BSS which is generated when the service policy is bound to the radio. |
| ROW hh3cDot11APServiceVlanRowStatus | 1.3.6.1.4.1.25506.2.75.4.3.7.1.4 | RowStatus | read-create | This object represents the status of this table entry. |
| hh3cDot11RadioConfigTable | 1.3.6.1.4.1.25506.2.75.4.3.8 | not-accessible | Before AP connects to AC, administrator will configure radio parameter to each radio. | |
| hh3cDot11RadioConfigEntry | 1.3.6.1.4.1.25506.2.75.4.3.8.1 | not-accessible | Each entry contains configuration information for each radio. | |
| OCT hh3cDot11RCAPSerialID | 1.3.6.1.4.1.25506.2.75.4.3.8.1.1 | OCTET STRING | not-accessible | This object represents the Serial ID of AP. |
| HH3 hh3cDot11RCRadioID | 1.3.6.1.4.1.25506.2.75.4.3.8.1.2 | Hh3cDot11RadioScopeType | not-accessible | This object represents each radio. |
| HH3 hh3cDot11RCRadioType | 1.3.6.1.4.1.25506.2.75.4.3.8.1.3 | Hh3cDot11RadioType | read-write | This object represents the radio will work with which 802.11 radio type. |
| HH3 hh3cDot11RCChannel | 1.3.6.1.4.1.25506.2.75.4.3.8.1.4 | Hh3cDot11ChannelScopeType | read-write | This object represents the channel allocation of radio. |
| HH3 hh3cDot11RCPreambleLen | 1.3.6.1.4.1.25506.2.75.4.3.8.1.5 | Hh3cDot11PreambleType | read-write | This object represents whether use long or short preamble for 802.11 MAC frame. When hh3cDot11CfgRadioType is either dot11b or dot11g, then value for hh3cDot11PreambleLen will be valid. Otherwise, the value for it will be invalid. |
| I32 hh3cDot11RCPwrAttValue | 1.3.6.1.4.1.25506.2.75.4.3.8.1.6 | Integer32 | read-write | This object represents the value of power attenuation. |
| HH3 hh3cDot11RCApPowerLevel | 1.3.6.1.4.1.25506.2.75.4.3.8.1.7 | Hh3cDot11TxPwrLevelScopeType | read-write | Represents the maximal transmit power scope for AP. |
| T/F hh3cDot11RCDynamicChlState | 1.3.6.1.4.1.25506.2.75.4.3.8.1.8 | TruthValue | read-write | Enable/Disable dynamic channel selection. |
| T/F hh3cDot11RCDynamicPowerState | 1.3.6.1.4.1.25506.2.75.4.3.8.1.9 | TruthValue | read-write | Enable/Disable dynamic power selection for the band. |
| T/F hh3cDot11RCRadioStatus | 1.3.6.1.4.1.25506.2.75.4.3.8.1.10 | TruthValue | read-write | Represents the radio admin status whether is enabled or disabled. |
| hh3cDot11RadioSSIDCfgTable | 1.3.6.1.4.1.25506.2.75.4.3.9 | not-accessible | For each radio, it could configure multiple service policies. The table describes the relationship between radio and service policies. | |
| hh3cDot11RadioSSIDCfgEntry | 1.3.6.1.4.1.25506.2.75.4.3.9.1 | not-accessible | Each entry contains SSID configuration information for each radio. | |
| HH3 hh3cDot11RadioSSIDSerialID | 1.3.6.1.4.1.25506.2.75.4.3.9.1.1 | Hh3cDot11ObjectIDType | not-accessible | This object represents the serial ID of AP. |
| HH3 hh3cDot11RadioSSIDRadioID | 1.3.6.1.4.1.25506.2.75.4.3.9.1.2 | Hh3cDot11RadioScopeType | not-accessible | This object represents each radio. |
| I32 hh3cDot11RadioSSIDWLANID | 1.3.6.1.4.1.25506.2.75.4.3.9.1.3 | Integer32 | not-accessible | This object represents the WLAN ID of the BSSID. |
| HH3 hh3cDot11RadioSSIDIndex | 1.3.6.1.4.1.25506.2.75.4.3.9.1.4 | Hh3cDot11ServicePolicyIDType | read-create | This object represents the ID of each service policy used by the radio. |
| MAC hh3cDot11RadioBSSID | 1.3.6.1.4.1.25506.2.75.4.3.9.1.5 | MacAddress | read-only | As MAC address format, it is used to identify BSS. |
| ROW hh3cDot11RadioSSIDRowStatus | 1.3.6.1.4.1.25506.2.75.4.3.9.1.6 | RowStatus | read-create | RowStatus. |
| hh3cDot11APSerialIDTable | 1.3.6.1.4.1.25506.2.75.4.3.10 | not-accessible | The table will provide the general information about APs. | |
| hh3cDot11APSerialIDEntry | 1.3.6.1.4.1.25506.2.75.4.3.10.1 | not-accessible | Each entry contains the general information of an AP. | |
| OCT hh3cDot11SIDAPSerialID | 1.3.6.1.4.1.25506.2.75.4.3.10.1.1 | OCTET STRING | not-accessible | Represents AP serial id. |
| INT hh3cDot11SIDAPWorkMode | 1.3.6.1.4.1.25506.2.75.4.3.10.1.2 | INTEGER | read-write | Represents what work mode for AP. The following values are supported: normal(1), - AP will supply WLAN service. monitor(2) - AP will be a monitor to find attack. hybrid(3) - AP will supply WLAN service and Device detection is enabled. |
| INT hh3cDot11SIDAPGetIPMethod | 1.3.6.1.4.1.25506.2.75.4.3.10.1.3 | INTEGER | read-write | This object represents the method how AP gets IP address. |
| hh3cDot11APSTVlanTable | 1.3.6.1.4.1.25506.2.75.4.3.11 | not-accessible | For each service policy, it could be bind to several VLANs. The table describes the relationship between VLAN and service policies. | |
| hh3cDot11APSTVlanEntry | 1.3.6.1.4.1.25506.2.75.4.3.11.1 | not-accessible | Each entry contains VLAN and service policy information for each specific radio of AP. | |
| I32 hh3cDot11CfgSTVLANID | 1.3.6.1.4.1.25506.2.75.4.3.11.1.1 | Integer32 | read-create | Represents the VLAN that current Service Policy have bind to. |
| I32 hh3cDot11CfgSTNASPortID | 1.3.6.1.4.1.25506.2.75.4.3.11.1.2 | Integer32 | read-only | Represents the NAS Port ID of current Service Policy for each specific radio of AP. |
| ROW hh3cDot11CfgServiceSetRowStatus | 1.3.6.1.4.1.25506.2.75.4.3.11.1.3 | RowStatus | read-create | The status of this table entry. |
| hh3cDot11RadioIntfConfigGroup | 1.3.6.1.4.1.25506.2.75.4.4 | |||
| hh3cDot11RadioIntfConfigTable | 1.3.6.1.4.1.25506.2.75.4.4.1 | not-accessible | The table defines the parameters for radio in AP, as per radio. | |
| hh3cDot11RadioIntfConfigEntry | 1.3.6.1.4.1.25506.2.75.4.4.1.1 | not-accessible | Each entry contains information of each radio in AP. | |
| I32 hh3cDot11RadioIfIdx | 1.3.6.1.4.1.25506.2.75.4.4.1.1.1 | Integer32 | not-accessible | Represents the Radio IfIndex of radio in AP. |
| I32 hh3cDot11RadioCfgBeaconIntvl | 1.3.6.1.4.1.25506.2.75.4.4.1.1.2 | Integer32 | read-write | Represents the interval for Beacon management frame. |
| I32 hh3cDot11RadioCfgDtimIntvl | 1.3.6.1.4.1.25506.2.75.4.4.1.1.3 | Integer32 | read-write | Represents the number of beacon intervals that shall elapse between transmission of Beacons frames containing a Traffic Indication Map (TIM) element whose DTIM Count field is 0. This value is transmitted in the Delivery TIM (DTIM) Period field of Beacon frames. |
| I32 hh3cDot11RadioCfgRtsThreshold | 1.3.6.1.4.1.25506.2.75.4.4.1.1.4 | Integer32 | read-write | Represents the current minimum size,in octets,of the MAC protocol data unit (MPDU), below which a Request to send/Clear to send (RTS/CTS) handshake shall not be performed. |
| I32 hh3cDot11RadioCfgFragThreshold | 1.3.6.1.4.1.25506.2.75.4.4.1.1.5 | Integer32 | read-write | Represents the current maximum size, in octets, of the MPDU that may be delivered to the PHY. A MSDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers. |
| I32 hh3cDot11RadioCfgShtRetryThld | 1.3.6.1.4.1.25506.2.75.4.4.1.1.6 | Integer32 | read-write | Represents the maximum number of transmission attempts of a frame, the length of which is less than or equal to hh3cDot11RadioRTSThreshold, that shall be made before a failure condition is indicated. |
| I32 hh3cDot11RadioCfglongRtrThld | 1.3.6.1.4.1.25506.2.75.4.4.1.1.7 | Integer32 | read-write | Represents the maximum number of transmission attempts of a frame, the length of which is longer than hh3cDot11RadioRTSThreshold, that shall be made before a failure condition is indicated. |
| U32 hh3cDot11RadioCfgMaxRxLifetime | 1.3.6.1.4.1.25506.2.75.4.4.1.1.8 | Unsigned32 | read-write | Represents the elapsed time. After the time specified by hh3cDot11RadioCfgMaxRxLifetime, the further attempts to reassemble the MSDU shall be terminated. |
| HH3 hh3cDot11RadioCfgType | 1.3.6.1.4.1.25506.2.75.4.4.1.1.9 | Hh3cDot11RadioType | read-write | Represents the radio will work with which 802.11 radio type. |
| HH3 hh3cDot11RadioCfgChannel | 1.3.6.1.4.1.25506.2.75.4.4.1.1.10 | Hh3cDot11ChannelScopeType | read-write | Represents the channel allocation of radio. |
| HH3 hh3cDot11RadioCfgMaxTxPwrLvl | 1.3.6.1.4.1.25506.2.75.4.4.1.1.11 | Hh3cDot11TxPwrLevelScopeType | read-write | Represents the maximal transmit power scope for AP. |
| HH3 hh3cDot11RadioCfgPreambleLen | 1.3.6.1.4.1.25506.2.75.4.4.1.1.12 | Hh3cDot11PreambleType | read-write | Represents whether use long or short preamble for 802.11 MAC frame. |
| HH3 hh3cDot11RadioCfgWorkMode | 1.3.6.1.4.1.25506.2.75.4.4.1.1.13 | Hh3cDot11WorkMode | read-write | Represents work mode of the radio. |
| T/F hh3cDot11RadioCfgOnly11gEnable | 1.3.6.1.4.1.25506.2.75.4.4.1.1.14 | TruthValue | read-write | Represents whether enable only 802.11g radio mode or not. 'true' : Only 802.11g radio mode is enabled. 'false': Only 802.11g radio mode is disabled. |
| hh3cDot11RadioIntfBindTable | 1.3.6.1.4.1.25506.2.75.4.4.2 | not-accessible | The table defines the binding information for each radio in AP. | |
| hh3cDot11RadioIntfBindEntry | 1.3.6.1.4.1.25506.2.75.4.4.2.1 | not-accessible | Each entry contains the radio interface binding information in AP. | |
| HH3 hh3cDot11RadioIntfBindSvcPlcyID | 1.3.6.1.4.1.25506.2.75.4.4.2.1.1 | Hh3cDot11ServicePolicyIDType | not-accessible | Represents the ID of each service policy. |
| U32 hh3cDot11RadioIntfBindIfIdx | 1.3.6.1.4.1.25506.2.75.4.4.2.1.2 | Unsigned32 | read-create | Represents the Ifindex of interface which is binded to the radio. |
| ROW hh3cDot11RadioIntfBindRowStatus | 1.3.6.1.4.1.25506.2.75.4.4.2.1.3 | RowStatus | read-create | The status of this table entry. |
| hh3cDot11DataRateConfigGroup | 1.3.6.1.4.1.25506.2.75.4.5 | |||
| hh3cDot11DataRateConfigTable | 1.3.6.1.4.1.25506.2.75.4.5.1 | not-accessible | Table will provide data rate configuration for a specific radio type. | |
| hh3cDot11DataRateConfigEntry | 1.3.6.1.4.1.25506.2.75.4.5.1.1 | not-accessible | Each entry of the table will provide data rate configuration for a specific radio type. | |
| HH3 hh3cDot11RadioTypeID | 1.3.6.1.4.1.25506.2.75.4.5.1.1.1 | Hh3cDot11RadioType | not-accessible | Represents the radio type. |
| OCT hh3cDot11SupportedRateSet | 1.3.6.1.4.1.25506.2.75.4.5.1.1.2 | OCTET STRING | read-write | Represents the supported rate set of a particular radio type. |
| OCT hh3cDot11MandatoryRateSet | 1.3.6.1.4.1.25506.2.75.4.5.1.1.3 | OCTET STRING | read-write | Represents the mandatory rate set of a particular radio type. |
| OCT hh3cDot11DisabledRateSet | 1.3.6.1.4.1.25506.2.75.4.5.1.1.4 | OCTET STRING | read-write | Represents the disabled rate set of a particular radio type. |
| OCT hh3cDot11SmartRateSet | 1.3.6.1.4.1.25506.2.75.4.5.1.1.5 | OCTET STRING | read-write | Represents the rate set of a particular radio type. |
| hh3cDot11InterfaceConfigGroup | 1.3.6.1.4.1.25506.2.75.4.6 | |||
| hh3cDot11WlanEssIfTable | 1.3.6.1.4.1.25506.2.75.4.6.1 | not-accessible | This table is used to configure WLAN ESS interface. | |
| hh3cDot11WlanEssIfEntry | 1.3.6.1.4.1.25506.2.75.4.6.1.1 | not-accessible | Each entry contains the WLAN ESS interface configuration. | |
| I32 hh3cDot11WlanEssIfNumber | 1.3.6.1.4.1.25506.2.75.4.6.1.1.1 | Integer32 | not-accessible | This node represents the WLAN ESS interface number. |
| I32 hh3cDot11WlanEssIfIndex | 1.3.6.1.4.1.25506.2.75.4.6.1.1.2 | Integer32 | read-only | This node represents the ifIndex of WLAN-ESS interface. |
| ROW hh3cDot11WlanEssRowStatus | 1.3.6.1.4.1.25506.2.75.4.6.1.1.3 | RowStatus | read-create | This node represents the WLAN ESS interface row status. |
| hh3cDot11WlanBssIfTable | 1.3.6.1.4.1.25506.2.75.4.6.2 | not-accessible | This table is used to configure WLAN BSS interface. | |
| hh3cDot11WlanBssIfEntry | 1.3.6.1.4.1.25506.2.75.4.6.2.1 | not-accessible | Each entry contains the WLAN BSS interface configuration. | |
| I32 hh3cDot11WlanBssIfNumber | 1.3.6.1.4.1.25506.2.75.4.6.2.1.1 | Integer32 | not-accessible | This node represents the WLAN BSS interface number. |
| I32 hh3cDot11WlanBssIfIndex | 1.3.6.1.4.1.25506.2.75.4.6.2.1.2 | Integer32 | read-only | This node represents the ifIndex of WLAN-BSS interface. |
| ROW hh3cDot11WlanBssRowStatus | 1.3.6.1.4.1.25506.2.75.4.6.2.1.3 | RowStatus | read-create | This node represents the WLAN BSS interface row status. |
| hh3cDot11WLANEthernetIfTable | 1.3.6.1.4.1.25506.2.75.4.6.3 | not-accessible | This table is used to configure WLAN Ethernet interface. | |
| hh3cDot11WLANEthernetIfEntry | 1.3.6.1.4.1.25506.2.75.4.6.3.1 | not-accessible | Each entry contains the WLAN Ethernet interface configuration. | |
| I32 hh3cDot11WlanEthernetIfNumber | 1.3.6.1.4.1.25506.2.75.4.6.3.1.1 | Integer32 | not-accessible | This node represents the WLAN Ethernet interface number. |
| I32 hh3cDot11WLANEthernetIfIndex | 1.3.6.1.4.1.25506.2.75.4.6.3.1.2 | Integer32 | read-only | This node represents the ifIndex of WLAN-Ethernet interface. |
| ROW hh3cDot11WlanEthernetRowStatus | 1.3.6.1.4.1.25506.2.75.4.6.3.1.3 | RowStatus | read-create | This node represents the Wlan Ethernet interface row status. |
| hh3cDot11PortSecurityTable | 1.3.6.1.4.1.25506.2.75.4.6.4 | not-accessible | This table defines the WLAN security status for ESS, BSS, mesh and WLAN-Ethernet interface which binding the crypto service-template. Otherwise, when binding the clear service-template, hh3cPortSecurityTables should be used to configure port security. | |
| hh3cDot11PortSecurityEntry | 1.3.6.1.4.1.25506.2.75.4.6.4.1 | not-accessible | There is a row in this table for each ESS, BSS and WLAN-Ethernet interface.It is indexed using the object ifIndex in RFC1213-MIB. | |
| INT hh3cDot11PortSecurityMode | 1.3.6.1.4.1.25506.2.75.4.6.4.1.1 | INTEGER | read-write | Determines the security modes of the WLAN port. noRestrictions(1) The default value,no any security mode is set. userLoginSecureExt(2) Access to the port is denied until the port client is authorized (by 802.1X). psk(3) Access to the port is denied until the port client is authorized (by 802.1X key negotiation). macAddressAndPsk(4) The MAC address is first authenticated and only if this succeeds does the psk then attempt user authentication. userLoginSecureExtOrPsk(5) This selects both the userLoginSecureExt and psk modes together such that either is allowed to authorized access. Which mode works for client depends on the client's choice. wapi(6) Access to the port is denied until the port client is authenticated (by WAPI). |
| INT hh3cDot11SecurityUserLoginTxKeyType | 1.3.6.1.4.1.25506.2.75.4.6.4.1.2 | INTEGER | read-write | This indicates the key type in the 802.1X EAPOL_Key packet. userLoginTxKeyTypeNone(1) This means the key type is not set yet. userLoginTxKeyTypeDot11Key(2) This selects the 802.11 key type. userLoginTxKeyTypeRsaRC4Key(3) This selects the RC4 key for RSA RC4 session encryption. |
| INT hh3cDot11SecurityPskKeyMode | 1.3.6.1.4.1.25506.2.75.4.6.4.1.3 | INTEGER | read-write | This is the password input mode. When input as pskKeyModePassPhrase, hh3cDot11SecurePskKeyString must be 8 to 63 characters; when input as pskKeyModeRawKey, hh3cDot11SecurePskKeyString must be 64 characters and each character must be '0'-'9', 'a'-'f' and 'A'-'F'. |
| STR hh3cDot11SecurityPskKeyString | 1.3.6.1.4.1.25506.2.75.4.6.4.1.4 | DisplayString | read-write | This is the password string used for psk authentication. |
| hh3cDot11WlanMeshIfTable | 1.3.6.1.4.1.25506.2.75.4.6.5 | not-accessible | This table is used to configure WLAN mesh interface. | |
| hh3cDot11WlanMeshIfEntry | 1.3.6.1.4.1.25506.2.75.4.6.5.1 | not-accessible | Each entry contains the WLAN mesh interface configuration. | |
| I32 hh3cDot11WlanMeshIfNumber | 1.3.6.1.4.1.25506.2.75.4.6.5.1.1 | Integer32 | not-accessible | This node represents the WLAN mesh interface number. |
| I32 hh3cDot11WlanMeshIfIndex | 1.3.6.1.4.1.25506.2.75.4.6.5.1.2 | Integer32 | read-only | This node represents the index of WLAN mesh interface. |
| ROW hh3cDot11WlanMeshRowStatus | 1.3.6.1.4.1.25506.2.75.4.6.5.1.3 | RowStatus | read-create | This node represents the WLAN mesh interface row status. |
| hh3cDot11ACBackupGroup | 1.3.6.1.4.1.25506.2.75.4.7 | |||
| IP hh3cDot11BackupACAdrssIP | 1.3.6.1.4.1.25506.2.75.4.7.1 | InetAddress | read-write | This object represents the backup AC IP address. If the backup AC IP address is not configured, the object value is 0.0.0.0. |
| IP hh3cDot11BackupACAdrssIPv6 | 1.3.6.1.4.1.25506.2.75.4.7.2 | InetAddress | read-write | This object represents the backup AC IPv6 address. If the backup AC IPv6 address is not configured, the object value is 0::0. |
| hh3cDot11RadioElementConfigGroup | 1.3.6.1.4.1.25506.2.75.4.8 | |||
| hh3cDot11nRadioCfgTable | 1.3.6.1.4.1.25506.2.75.4.8.1 | not-accessible | This table is used to configure dot11n on the radio. | |
| hh3cDot11nRadioCfgEntry | 1.3.6.1.4.1.25506.2.75.4.8.1.1 | not-accessible | This entry contains the dot11n configuration on the radio. | |
| HH3 hh3cDot11nRadioCfgIndex | 1.3.6.1.4.1.25506.2.75.4.8.1.1.1 | Hh3cDot11RadioElementIndex | not-accessible | Represents index of the radio. |
| T/F hh3cDot11nAMpduEnable | 1.3.6.1.4.1.25506.2.75.4.8.1.1.2 | TruthValue | read-write | Enable the function of A-MPDU. |
| T/F hh3cDot11nAMsduEnable | 1.3.6.1.4.1.25506.2.75.4.8.1.1.3 | TruthValue | read-write | Enable the function of A-MSDU. |
| T/F hh3cDot11nClientDot11nOnly | 1.3.6.1.4.1.25506.2.75.4.8.1.1.4 | TruthValue | read-write | Only permit clients of 11n mode. |
| INT hh3cDot11nChanelBand | 1.3.6.1.4.1.25506.2.75.4.8.1.1.5 | INTEGER | read-write | Specify the bandwidth mode. |
| T/F hh3cDot11nShortGiEnable | 1.3.6.1.4.1.25506.2.75.4.8.1.1.6 | TruthValue | read-write | The function of Short GI. |
| hh3cDot11RadioWDSTable | 1.3.6.1.4.1.25506.2.75.4.8.2 | not-accessible | This table is used to configure WDS on the radio. | |
| hh3cDot11RadioWDSEntry | 1.3.6.1.4.1.25506.2.75.4.8.2.1 | not-accessible | Each entry contains the WDS configuration on the radio. | |
| HH3 hh3cDot11RadioWDSIndex | 1.3.6.1.4.1.25506.2.75.4.8.2.1.1 | Hh3cDot11RadioElementIndex | not-accessible | Represents the element index of radio. |
| INT hh3cDot11RadioWDSMode | 1.3.6.1.4.1.25506.2.75.4.8.2.1.2 | INTEGER | read-write | Represents enable the WDS mode or not. nowds: The WDS mode is disabled. wds : The WDS mode is enabled |
| OCT hh3cDot11RadioWDSNetWorkID | 1.3.6.1.4.1.25506.2.75.4.8.2.1.3 | OCTET STRING | read-write | Represents the mesh ID of WDS. |
| INT hh3cDot11WDSSecPskKeyMode | 1.3.6.1.4.1.25506.2.75.4.8.2.1.4 | INTEGER | read-write | Represents the PSK mode of WDS. |
| STR hh3cDot11WDSSecPskKeyString | 1.3.6.1.4.1.25506.2.75.4.8.2.1.5 | DisplayString | read-write | Represents the PSK value of WDS. |
| hh3cDot11CfgNotifyGroup | 1.3.6.1.4.1.25506.2.75.4.9 | |||
| hh3cDot11CfgNotifications | 1.3.6.1.4.1.25506.2.75.4.9.0 | |||
| NTF hh3cDot11CfgCipherChange | 1.3.6.1.4.1.25506.2.75.4.9.0.1 | This notification is sent when cipher type of corresponding service template is changed. | ||
| NTF hh3cDot11CfgPSKChange | 1.3.6.1.4.1.25506.2.75.4.9.0.2 | This notification is sent when pre-shared key of corresponding service template is changed. | ||
| NTF hh3cDot11SSIDWepIDConflictTrap | 1.3.6.1.4.1.25506.2.75.4.9.0.3 | This notification will be sent when the same wep ID is configured on two service policies. | ||
| hh3cDot11CfgTrapVarObjects | 1.3.6.1.4.1.25506.2.75.4.9.1 | |||
| I32 hh3cDot11PreConflictTemplateNum | 1.3.6.1.4.1.25506.2.75.4.9.1.1 | Integer32 | accessible-for-notify | Represents previous service policy ID when radio bind service policy and current service policy conflict with previous service policy in cipher configuration. |
| I32 hh3cDot11CurrConflictTemplateNum | 1.3.6.1.4.1.25506.2.75.4.9.1.2 | Integer32 | accessible-for-notify | Represents current service policy ID when radio bind service policy and current service policy conflict with previous service policy in cipher configuration. |
| I32 hh3cDot11ConflictCipherIdx | 1.3.6.1.4.1.25506.2.75.4.9.1.3 | Integer32 | accessible-for-notify | Represents wep ID that conflicted with. |
| HH3 hh3cDot11ConfigureAPID | 1.3.6.1.4.1.25506.2.75.4.9.1.4 | Hh3cDot11ObjectIDType | accessible-for-notify | Represents which AP is configured. |
| HH3 hh3cDot11ConfigureRadioID | 1.3.6.1.4.1.25506.2.75.4.9.1.5 | Hh3cDot11RadioScopeType | accessible-for-notify | Represents which radio in AP is configured. |
RFC description
Configures IEEE 802.11 WLAN parameters including APs, security, data rates, and service policies.
Start monitoring H3C wireless controller (802.11 basic WLAN config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.