HH3C-EPON-FB-MIB

All MIBs › HH3C-EPON-FB-MIB

Organization: Hangzhou H3C Technologies Co., Ltd.

Last Updated: 2007-11-27

Category: Technology: EPON/PON, Vendor: H3C/HH3C

Description: Manages EPON fiber backup and protection switching functions on H3C EPON OLT systems.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HH3C-EPON-FB-MIB?

HH3C-EPON-FB-MIB is a Hangzhou H3C Technologies proprietary MIB managing EPON OLT fiber-backup (redundant-fiber) groups. Its table, keyed by group index, records row status, master/slave port, master/slave port status, and a switchover action. As a configuration/status MIB it lets an administrator confirm which fiber port is active and trigger a manual failover on an H3C EPON OLT fiber-backup group. It is deployed on H3C EPON (Ethernet Passive Optical Network) OLT equipment. Engineers can download the HH3C-EPON-FB-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HH3C-EPON-FB-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C EPON (Ethernet Passive Optical Network) OLT equipment

Monitoring Examples

An administrator checks hh3cEponFBMasterPortStatus and triggers hh3cEponFBSwitchover to fail over to the backup fiber on an H3C EPON OLT.

What Can Be Monitored

fiber-backup group active-port status and failover control

Imported Objects

From HH3C-OID-MIB

hh3cEpon

OBJECT-IDENTITY

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
hh3cEponFBMibObjects	1.3.6.1.4.1.25506.2.42.6			The objects in this MIB module are used to manage and display current configuration of fiber backup groups based on EPON OLT port.
hh3cEponFBMIB	1.3.6.1.4.1.25506.2.42.6.1
hh3cEponFBMIBTable	1.3.6.1.4.1.25506.2.42.6.1.1		not-accessible	This table defines several optical fiber-backup system parameters.
hh3cEponFBMIBEntry	1.3.6.1.4.1.25506.2.42.6.1.1.1		not-accessible	The entry of hh3cEponFBMIBTable.
I32 hh3cEponFBGroupIndex	1.3.6.1.4.1.25506.2.42.6.1.1.1.1	Integer32	not-accessible	The EPON fiber-backup group ID.
ROW hh3cEponFBGroupRowStatus	1.3.6.1.4.1.25506.2.42.6.1.1.1.2	RowStatus	read-create	This object allows entry to be created and deleted from the hh3cEponFBMIBTable.
I32 hh3cEponFBMasterPort	1.3.6.1.4.1.25506.2.42.6.1.1.1.3	Integer32	read-create	OLT port ifindex of the fiber-backup group. Use it to set or get the group master port.
I32 hh3cEponFBSlavePort	1.3.6.1.4.1.25506.2.42.6.1.1.1.4	Integer32	read-create	OLT port ifindex of the fiber-backup group. Use it to set or get the group slave port. hh3cEponFBSlavePort must be set after hh3cEponFBMasterPort.
INT hh3cEponFBMasterPortStatus	1.3.6.1.4.1.25506.2.42.6.1.1.1.5	INTEGER	read-only	The master port status of the fiber-backup group. The active state indicates that the port's role is master, the olt chip is right and the optical module is inserted. The down state indicates others conditions.
INT hh3cEponFBSlavePortStatus	1.3.6.1.4.1.25506.2.42.6.1.1.1.6	INTEGER	read-only	The slave port status of the fiber-backup group. The ready state indicates that the port's role is slave, the olt chip is right and optical module is inserted. The down state indicates others conditions.
INT hh3cEponFBSwitchover	1.3.6.1.4.1.25506.2.42.6.1.1.1.7	INTEGER	read-create	Switch the fiber backup group's two port manually. The group must has two ports and the value of hh3cEponFBSlavePortStatus must be ready before Switchover. after Switchover the port's role will be changed. The value true is for switch-over. The default value is false.

RFC description

Defines EPON (Ethernet Passive Optical Network) fiber backup configuration and management for H3C OLT port-based fiber backup groups.

Start monitoring H3C EPON OLT equipment (fiber backup/protection groups) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HH3C-EPON-FB-MIB

What Is HH3C-EPON-FB-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description