All MIBs › HH3C-DOT11-CFG-MIB › hh3cDot11PortSecurityMode
hh3cDot11PortSecurityMode
Module: HH3C-DOT11-CFG-MIB
OID (symbolic): HH3C-DOT11-CFG-MIB::hh3cDot11PortSecurityMode
OID (numeric): 1.3.6.1.4.1.25506.2.75.4.6.4.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Determines the security modes of the WLAN port.
noRestrictions(1) The default value,no any security mode is set.
userLoginSecureExt(2) Access to the port is denied until the port client is authorized (by 802.1X).
psk(3) Access to the port is denied until the port client is authorized (by 802.1X key negotiation).
macAddressAndPsk(4) The MAC address is first authenticated and only if this succeeds does the psk then attempt user authentication.
userLoginSecureExtOrPsk(5) This selects both the userLoginSecureExt and psk modes together such that either is allowed to authorized access. Which mode works for client depends on the client's choice.
wapi(6) Access to the port is denied until the port client is authenticated (by WAPI).
What is hh3cDot11PortSecurityMode?
This selects the port security mode — no restrictions, 802.1X-based userLoginSecureExt, PSK, MAC-address-plus-PSK, either 802.1X or PSK, or WAPI — for an ESS, BSS, or WLAN-Ethernet interface indexed by ifIndex, defaulting to noRestrictions. It is the interface-indexed counterpart to hh3cDot11SrvPortSecurityMode, and an admin sets it the same way when working directly with the standard ifIndex rather than through a service-policy ID.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25506.2.75.4.6.4.1.1 snmpwalk -v2c -c public <target> HH3C-DOT11-CFG-MIB::hh3cDot11PortSecurityMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25506.2.75.4.6.4.1.1.1 snmpget -v2c -c public <target> HH3C-DOT11-CFG-MIB::hh3cDot11PortSecurityMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.25506.2.75.4.6.4.1.1.1 i <value>
Start monitoring H3C wireless controller (802.11 basic WLAN config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HH3C-DOT11-CFG-MIB::hh3cDot11PortSecurityMode OID value, configure state conditions and alerts, and monitor any H3C wireless controller (802.11 basic WLAN config) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25506 | hh3c | HH3C-OID-MIB |
| 1.3.6.1.4.1.25506.2 | hh3cCommon | HH3C-OID-MIB |
| 1.3.6.1.4.1.25506.2.75 | hh3cDot11 | HH3C-DOT11-REF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25506.2.75.4 | hh3cDot11CFG | HH3C-DOT11-CFG-MIB |
| 1.3.6.1.4.1.25506.2.75.4.6 | hh3cDot11InterfaceConfigGroup | HH3C-DOT11-CFG-MIB |
| 1.3.6.1.4.1.25506.2.75.4.6.4 | hh3cDot11PortSecurityTable | HH3C-DOT11-CFG-MIB |
| 1.3.6.1.4.1.25506.2.75.4.6.4.1 | hh3cDot11PortSecurityEntry | HH3C-DOT11-CFG-MIB |
| 1.3.6.1.4.1.25506.2.75.4.6.4.1.1 | hh3cDot11PortSecurityMode | HH3C-DOT11-CFG-MIB |