All MIBs › HH3C-DOT11-CFG-MIB › hh3cDot11SrvPortSecurityMode
hh3cDot11SrvPortSecurityMode
Module: HH3C-DOT11-CFG-MIB
OID (symbolic): HH3C-DOT11-CFG-MIB::hh3cDot11SrvPortSecurityMode
OID (numeric): 1.3.6.1.4.1.25506.2.75.4.2.5.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Determines the security modes of the WLAN port.
noRestrictions(1) The default value,no any security mode is set.
userLoginSecureExt(2) Access to the port is denied until the port client is authorized (by 802.1X).
psk(3) Access to the port is denied until the port client is authorized (by 802.1X key negotiation).
macAddressAndPsk(4) The MAC address is first authenticated and only if this succeeds does the psk then attempt user authentication.
userLoginSecureExtOrPsk(5) This selects both the userLoginSecureExt and psk modes together such that either is allowed to authorized access. Which mode works for client depends on the client's choice.
wapi(6) Access to the port is denied until the port client is authenticated (by WAPI).
What is hh3cDot11SrvPortSecurityMode?
This selects the port security mode for a WLAN service policy — no restrictions, 802.1X-based userLoginSecureExt, PSK, MAC-address-plus-PSK, either 802.1X or PSK, or WAPI — defaulting to noRestrictions. An admin sets this to whatever authentication gate the service policy's port should enforce before letting a client's traffic through; for example, macAddressAndPsk(4) requires both a recognized MAC address and a correct PSK before access is granted.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25506.2.75.4.2.5.1.2 snmpwalk -v2c -c public <target> HH3C-DOT11-CFG-MIB::hh3cDot11SrvPortSecurityMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25506.2.75.4.2.5.1.2.1 snmpget -v2c -c public <target> HH3C-DOT11-CFG-MIB::hh3cDot11SrvPortSecurityMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.25506.2.75.4.2.5.1.2.1 i <value>
Start monitoring H3C wireless controller (802.11 basic WLAN config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HH3C-DOT11-CFG-MIB::hh3cDot11SrvPortSecurityMode OID value, configure state conditions and alerts, and monitor any H3C wireless controller (802.11 basic WLAN config) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25506 | hh3c | HH3C-OID-MIB |
| 1.3.6.1.4.1.25506.2 | hh3cCommon | HH3C-OID-MIB |
| 1.3.6.1.4.1.25506.2.75 | hh3cDot11 | HH3C-DOT11-REF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25506.2.75.4 | hh3cDot11CFG | HH3C-DOT11-CFG-MIB |
| 1.3.6.1.4.1.25506.2.75.4.2 | hh3cDot11PolicyConfigGroup | HH3C-DOT11-CFG-MIB |
| 1.3.6.1.4.1.25506.2.75.4.2.5 | hh3cDot11SrvPortSecurityTable | HH3C-DOT11-CFG-MIB |
| 1.3.6.1.4.1.25506.2.75.4.2.5.1 | hh3cDot11SrvPortSecurityEntry | HH3C-DOT11-CFG-MIB |
| 1.3.6.1.4.1.25506.2.75.4.2.5.1.2 | hh3cDot11SrvPortSecurityMode | HH3C-DOT11-CFG-MIB |