A3COM-HUAWEI-EPON-FB-MIB

All MIBs › A3COM-HUAWEI-EPON-FB-MIB

Organization: Hangzhou H3C Technologies Co., Ltd.

Last Updated: 2007-11-27

Category: Optical and WDM, Vendor: H3C/HH3C

Description: Handles fiber backup protection switching and failover configuration for EPON on H3C optical network equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is A3COM-HUAWEI-EPON-FB-MIB?

A3COM-HUAWEI-EPON-FB-MIB is an H3C (Hangzhou H3C Tech. Co., Ltd.) proprietary MIB managing EPON OLT fiber-backup groups, which provide optical-fiber redundancy between a master and slave port. Its group table, keyed by index, records row status, master/slave port, master/slave port status, and a manual-switchover action. As a configuration/status MIB it lets an administrator confirm which port is currently active in a fiber-backup pair and manually trigger a switchover. It is deployed on H3C (3Com-Huawei) EPON OLT platforms. Engineers can download the A3COM-HUAWEI-EPON-FB-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in A3COM-HUAWEI-EPON-FB-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C (3Com-Huawei) EPON OLT platforms

Monitoring Examples

An administrator checks h3cEponFBMasterPortStatus and triggers h3cEponFBSwitchover to fail over to the backup fiber port on an H3C EPON OLT.

What Can Be Monitored

fiber-backup group master/slave port status

Imported Objects

From A3COM-HUAWEI-OID-MIB

h3cEpon

OBJECT-IDENTITY

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
h3cEponFBMibObjects	1.3.6.1.4.1.43.45.1.10.2.42.6			The objects in this MIB module are used to manage and display current configuration of fiber backup groups based on EPON OLT port.
h3cEponFBMIB	1.3.6.1.4.1.43.45.1.10.2.42.6.1
h3cEponFBMIBTable	1.3.6.1.4.1.43.45.1.10.2.42.6.1.1		not-accessible	This table defines several optical fiber-backup system parameters.
h3cEponFBMIBEntry	1.3.6.1.4.1.43.45.1.10.2.42.6.1.1.1		not-accessible	The entry of h3cEponFBMIBTable.
I32 h3cEponFBGroupIndex	1.3.6.1.4.1.43.45.1.10.2.42.6.1.1.1.1	Integer32	not-accessible	The EPON fiber-backup group ID.
ROW h3cEponFBGroupRowStatus	1.3.6.1.4.1.43.45.1.10.2.42.6.1.1.1.2	RowStatus	read-create	This object allows entry to be created and deleted from the h3cEponFBMIBTable.
I32 h3cEponFBMasterPort	1.3.6.1.4.1.43.45.1.10.2.42.6.1.1.1.3	Integer32	read-create	OLT port ifindex of the fiber-backup group. Use it to set or get the group master port.
I32 h3cEponFBSlavePort	1.3.6.1.4.1.43.45.1.10.2.42.6.1.1.1.4	Integer32	read-create	OLT port ifindex of the fiber-backup group. Use it to set or get the group slave port. h3cEponFBSlavePort must be set after h3cEponFBMasterPort.
INT h3cEponFBMasterPortStatus	1.3.6.1.4.1.43.45.1.10.2.42.6.1.1.1.5	INTEGER	read-only	The master port status of the fiber-backup group. The active state indicates that the port's role is master, the olt chip is right and the optical module is inserted. The down state indicates others conditions.
INT h3cEponFBSlavePortStatus	1.3.6.1.4.1.43.45.1.10.2.42.6.1.1.1.6	INTEGER	read-only	The slave port status of the fiber-backup group. The ready state indicates that the port's role is slave, the olt chip is right and optical module is inserted. The down state indicates others conditions.
INT h3cEponFBSwitchover	1.3.6.1.4.1.43.45.1.10.2.42.6.1.1.1.7	INTEGER	read-create	Switch the fiber backup group's two port manually. The group must has two ports and the value of h3cEponFBSlavePortStatus must be ready before Switchover. after Switchover the port's role will be changed. The value true is for switch-over. The default value is false.

RFC description

Manages EPON fiber backup protection switching and failover configuration on H3C optical network devices.

Start monitoring H3C EPON OLT equipment with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download A3COM-HUAWEI-EPON-FB-MIB

What Is A3COM-HUAWEI-EPON-FB-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description