All MIBs › A3COM-HUAWEI-AAA-NASID-MIB
Organization: Hangzhou H3C Technologies Co., Ltd.
Last Updated: 2011-03-09
Category: RADIUS and AAA, Vendor: H3C/HH3C
Description: Manages AAA NAS-ID profile bindings on H3C devices, mapping NAS identifiers to AAA domains.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is A3COM-HUAWEI-AAA-NASID-MIB?
A3COM-HUAWEI-AAA-NASID-MIB is a joint 3Com/Huawei (H3C) vendor MIB for managing the NAS-ID feature within AAA (Authentication, Authorization, and Accounting) configuration on H3C network devices. It exposes a table binding NAS identifier strings to configuration entries, used when the device acts as a Network Access Server presenting a specific NAS-ID string to RADIUS/AAA servers. This is a configuration-status MIB rather than a hardware-health MIB: it lets an operator verify that the correct NAS-ID is bound and active for AAA domain routing, which is important for troubleshooting authentication failures caused by NAS-ID mismatches at the RADIUS server. It depends on and complements the broader H3C AAA MIB suite for authentication/authorization/accounting configuration. It is deployed on H3C/3Com switches and routers acting as network access servers for dial-in, wireless, or wired 802.1X authentication. Engineers can download the A3COM-HUAWEI-AAA-NASID-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in A3COM-HUAWEI-AAA-NASID-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- H3C (Huawei-3Com) switch or router acting as Network Access Server
Monitoring Examples
An admin would poll h3cAAANasIdTable/h3cAAANasIdEntry to read h3cAAANasIdName and confirm the configured NAS identifier string matches what the RADIUS server expects for a given AAA domain. If users report unexpected authentication rejections, checking h3cAAANasIdObjects for a missing or mismatched NAS-ID entry would explain the RADIUS server failing to recognize the NAS. This table is typically cross-referenced with the domain-to-NAS-ID mapping configured on the AAA server.
What Can Be Monitored
- configured NAS-ID name
- NAS-ID table entries
- AAA NAS-ID binding status
Imported Objects
From A3COM-HUAWEI-OID-MIB
| h3cCommon | OBJECT-IDENTITY |
From SNMPv2-SMI
| MODULE-IDENTITY | |
| OBJECT-TYPE |
OIDs
RFC description
Manages AAA Nas-id (Network Access Server identifier) configuration for authentication, authorization, and accounting on H3C devices.
Start monitoring H3C switches and routers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.