F3-JDSU-MIB

All MIBs › F3-JDSU-MIB

Organization: ADVA Optical Networking

Last Updated: 2014-01-02

Category: Vendor: ADVA Optical

Description: ADVA Optical Networking F3 platform MIB for JDSU optical test equipment integration and in-service optical monitoring.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is F3-JDSU-MIB?

This ADVA Optical Networking MIB is part of the F3 platform (FSP150CM/CC family of carrier Ethernet demarcation devices) and covers integration with embedded JDSU (Viavi) optical test/traffic-generation hardware for in-service performance testing. It exposes configuration objects for a built-in traffic generator, including per-port VLAN tagging setup (outer and up to two inner/stacked VLAN tags with IDs, priorities, and EtherTypes). Rather than hardware environmental sensors, its monitoring value is centered on configuring and validating test-traffic generation used to verify service turn-up and SLA performance on the FSP 150 platform. As part of the broader F3 MIB family (alongside F3-PBB, F3-POPM, F3-PWE3) it is used together with those sibling MIBs and the platform's core chassis/interface MIBs rather than standalone. It is deployed on ADVA FSP150CM/CC carrier Ethernet network elements used by service providers for Ethernet service activation testing and performance monitoring. Engineers can download the F3-JDSU-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in F3-JDSU-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ADVA FSP150CM/CC carrier Ethernet demarcation device

Monitoring Examples

A technician would configure f3JdsuGeneratorPort and enable f3JdsuGeneratorOuterVlanEnabled with a specific f3JdsuGeneratorOuterVlanId/Pri/EtherType to generate test traffic tagged to match a customer's service VLAN, then layer f3JdsuGeneratorInnerVlan1Enabled/Id and f3JdsuGeneratorInnerVlan2Enabled/Id to simulate a Q-in-Q or stacked-VLAN service during activation testing. This lets the operator confirm the FSP150 correctly forwards and prioritizes traffic matching the exact VLAN structure of the live service before handing it to the customer.

What Can Be Monitored

generator port assignment
outer VLAN tag ID/priority/EtherType
inner VLAN 1 tag configuration
inner VLAN 2 tag configuration
VLAN tagging enable state

Imported Objects

From ADVA-MIB

fsp150cm

OBJECT-IDENTITY

From CM-COMMON-MIB

AdminState
OperationalState
SecondaryState
VlanId
VlanPriority

From CM-ENTITY-MIB

neIndex	OBJECT-TYPE
shelfIndex	OBJECT-TYPE
slotIndex	OBJECT-TYPE

From CM-FACILITY-MIB

cmEthernetTrafficPortEntry	OBJECT-TYPE
cmEthernetTrafficPortIndex	OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
MacAddress
RowStatus
StorageType
TEXTUAL-CONVENTION
TruthValue
VariablePointer

OIDs

OID symbolic	OID numeric	Type	Access	Description
f3EthernetTrafficPortJdsuExtEntry	1.3.6.1.4.1.2544.1.12.31.1.20.1		not-accessible	A conceptual row in the cmEthernetTrafficPortJdsuExtTable.
f3EthernetTrafficPortJdsuExtTable	1.3.6.1.4.1.2544.1.12.31.1.20		not-accessible	A list of entries corresponding to Ethernet Traffic Port Facilities for JDSU configuration purposes.
T/F f3EthernetTrafficPortJdsuGenerationEanbled	1.3.6.1.4.1.2544.1.12.31.1.20.1.2	TruthValue	read-write	This object describes whether the user would to raise a JDSU discovery action. When JDSU Loopback Enabled, this attribute cann't be enabled.
T/F f3EthernetTrafficPortJdsuLoopbackEnabled	1.3.6.1.4.1.2544.1.12.31.1.20.1.1	TruthValue	read-write	Enabled: reaction/response to JDSU in-band loopback requests and hallo requests. Disabled: Not reaction/response to JDSU in-band loopback requests and hallo requests. FPGA shall not filter the JDSU control frames to processor. From enabled to disabled, if there is already a JDSU loopback on the port, release current loopback. JDSU loopback doesn't need port in maintenance state. When JDSU Generation Enabled, this attribute can't be enabled.
STR f3EthernetTrafficPortJdsuLoopbackVlanList	1.3.6.1.4.1.2544.1.12.31.1.20.1.3	DisplayString	read-only	In EG-X, up to 12 loopback can be supported and also up to 2 layer VLAN can be supported. The format is like 'OuterVid1-OuterPri1;InnerVid1-InnerPri1, OuterVid2-OuterPri2, OuterVid3-OuterPri3;InnerVid3-InnerPri3'('1-;2-, 3-, 4-;5-*').
f3JdsuCompliance	1.3.6.1.4.1.2544.1.12.31.3.1.1			Describes the requirements for conformance to the f3 jdsu group.
f3JdsuCompliances	1.3.6.1.4.1.2544.1.12.31.3.1
f3JdsuConformance	1.3.6.1.4.1.2544.1.12.31.3
MAC f3JdsuGeneratorConfigureDestMacAddr	1.3.6.1.4.1.2544.1.12.31.1.19.1.1	MacAddress	not-accessible	This object describes the destination MAC address for the test frames.
f3JdsuGeneratorConfigureEntry	1.3.6.1.4.1.2544.1.12.31.1.19.1		not-accessible	A conceptual row in the f3JdsuGeneratorConfigureTable.
I32 f3JdsuGeneratorConfigureFrameLength	1.3.6.1.4.1.2544.1.12.31.1.19.1.16	Integer32	read-write	Indicates the length of the frame which shall be injected, The size range for all ports is from 64 to 9600.
JDS f3JdsuGeneratorConfigureFrameType	1.3.6.1.4.1.2544.1.12.31.1.19.1.14	JdsuGeneratorFrameType	read-only	This object describes the filter's frame type. Its default value is 802.3.
GEN f3JdsuGeneratorConfigureGeneratorAction	1.3.6.1.4.1.2544.1.12.31.1.19.1.21	GeneratorAction	read-write	Indicates JDSU Generator lookup or lookdown action.
T/F f3JdsuGeneratorConfigureIfReachable	1.3.6.1.4.1.2544.1.12.31.1.19.1.18	TruthValue	read-only	Indicates whether the mac can be Configureed or not exactly.
T/F f3JdsuGeneratorConfigureInnerVlan1Enabled	1.3.6.1.4.1.2544.1.12.31.1.19.1.6	TruthValue	read-only	This object describes whether the filter's Inner Vlan1 enabled.
I32 f3JdsuGeneratorConfigureInnerVlan1EtherType	1.3.6.1.4.1.2544.1.12.31.1.19.1.9	Integer32	read-only	This object describes the filter's Inner Vlan1 Ether Type.
VLA f3JdsuGeneratorConfigureInnerVlan1Id	1.3.6.1.4.1.2544.1.12.31.1.19.1.7	VlanId	read-only	This object describes the filter's Inner Vlan1 ID.
VLA f3JdsuGeneratorConfigureInnerVlan1Pri	1.3.6.1.4.1.2544.1.12.31.1.19.1.8	VlanPriority	read-only	This object describes the filter's Inner Vlan1 Priority.
T/F f3JdsuGeneratorConfigureInnerVlan2Enabled	1.3.6.1.4.1.2544.1.12.31.1.19.1.10	TruthValue	read-only	This object describes whether the filter's Inner Vlan2 enabled.
I32 f3JdsuGeneratorConfigureInnerVlan2EtherType	1.3.6.1.4.1.2544.1.12.31.1.19.1.13	Integer32	read-only	This object describes the filter's Inner Vlan2 Ether Type.
VLA f3JdsuGeneratorConfigureInnerVlan2Id	1.3.6.1.4.1.2544.1.12.31.1.19.1.11	VlanId	read-only	This object describes the filter's Inner Vlan2 ID.
VLA f3JdsuGeneratorConfigureInnerVlan2Pri	1.3.6.1.4.1.2544.1.12.31.1.19.1.12	VlanPriority	read-only	This object describes the filter's Inner Vlan2 Priority.
T/F f3JdsuGeneratorConfigureOuterVlanEnabled	1.3.6.1.4.1.2544.1.12.31.1.19.1.2	TruthValue	read-only	This object describes whether the filter's Outer Vlan enabled.
I32 f3JdsuGeneratorConfigureOuterVlanEtherType	1.3.6.1.4.1.2544.1.12.31.1.19.1.5	Integer32	read-only	This object describes the filter's Outer Vlan Ether Type.
VLA f3JdsuGeneratorConfigureOuterVlanId	1.3.6.1.4.1.2544.1.12.31.1.19.1.3	VlanId	read-only	This object describes the filter's Outer Vlan ID.
VLA f3JdsuGeneratorConfigureOuterVlanPri	1.3.6.1.4.1.2544.1.12.31.1.19.1.4	VlanPriority	read-only	This object describes the filter's Outer Vlan Priority.
JDS f3JdsuGeneratorConfigurePayloadType	1.3.6.1.4.1.2544.1.12.31.1.19.1.15	JdsuGeneratorPayloadType	read-only	Indicates the type of payload the remaining test frame shall contain, either fixed (incremental bytes or repeated bytes) or random (according to IEEE short continuous random test pattern). Default is random. This payload starts after the Ethernet frame header (including all VLAN tags).
UPD f3JdsuGeneratorConfigureReachableUpdate	1.3.6.1.4.1.2544.1.12.31.1.19.1.19	UpdateReachStatus	read-write	Action on update the reachable status of the related item.
ROW f3JdsuGeneratorConfigureRowStatus	1.3.6.1.4.1.2544.1.12.31.1.19.1.23	RowStatus	read-create	The status of this row. Note: one row can be deleted by set this item as destoryed.
GEN f3JdsuGeneratorConfigureStatus	1.3.6.1.4.1.2544.1.12.31.1.19.1.20	GeneratorStatus	read-only	Indicates the generator status exactly.
STO f3JdsuGeneratorConfigureStorageType	1.3.6.1.4.1.2544.1.12.31.1.19.1.22	StorageType	read-create	The type of storage configured for this entry.
f3JdsuGeneratorConfigureTable	1.3.6.1.4.1.2544.1.12.31.1.19		not-accessible	A list of entries corresponding to JDSU Generator Configure Information.
STR f3JdsuGeneratorConfigureUnitTextId	1.3.6.1.4.1.2544.1.12.31.1.19.1.17	DisplayString	read-only	Indicates the string from remote device. Normally it is system name of remote device.
MAC f3JdsuGeneratorDiscoverDestMacAddr	1.3.6.1.4.1.2544.1.12.31.1.18.1.1	MacAddress	not-accessible	This object describes the destination MAC address for the test frames.
f3JdsuGeneratorDiscoverEntry	1.3.6.1.4.1.2544.1.12.31.1.18.1		not-accessible	A conceptual row in the f3JdsuGeneratorDiscoverTable.
I32 f3JdsuGeneratorDiscoverFrameLength	1.3.6.1.4.1.2544.1.12.31.1.18.1.16	Integer32	read-write	Indicates the length of the frame which shall be injected, The size range for all ports is from 64 to 9600.
JDS f3JdsuGeneratorDiscoverFrameType	1.3.6.1.4.1.2544.1.12.31.1.18.1.14	JdsuGeneratorFrameType	read-only	This object describes the filter's frame type. Its default value is 802.3.
GEN f3JdsuGeneratorDiscoverGeneratorAction	1.3.6.1.4.1.2544.1.12.31.1.18.1.22	GeneratorAction	read-write	Indicates looup or lookdown action.
GEN f3JdsuGeneratorDiscoverGeneratorStatus	1.3.6.1.4.1.2544.1.12.31.1.18.1.19	GeneratorStatus	read-only	Indicates the generator status.
T/F f3JdsuGeneratorDiscoverIfReachable	1.3.6.1.4.1.2544.1.12.31.1.18.1.18	TruthValue	read-only	Indicate whether the mac can be discovered or not exactly.
T/F f3JdsuGeneratorDiscoverInnerVlan1Enabled	1.3.6.1.4.1.2544.1.12.31.1.18.1.6	TruthValue	read-only	This object describes whether the filter's Inner Vlan1 enabled.
I32 f3JdsuGeneratorDiscoverInnerVlan1EtherType	1.3.6.1.4.1.2544.1.12.31.1.18.1.9	Integer32	read-only	This object describes the filter's Inner Vlan1 Ether Type.
VLA f3JdsuGeneratorDiscoverInnerVlan1Id	1.3.6.1.4.1.2544.1.12.31.1.18.1.7	VlanId	read-only	This object describe the filter's Inner Vlan1 ID.
VLA f3JdsuGeneratorDiscoverInnerVlan1Pri	1.3.6.1.4.1.2544.1.12.31.1.18.1.8	VlanPriority	read-only	This object describes the filter's Inner Vlan1 Priority.
T/F f3JdsuGeneratorDiscoverInnerVlan2Enabled	1.3.6.1.4.1.2544.1.12.31.1.18.1.10	TruthValue	read-only	This object describes whether the filter's Inner Vlan2 enabled.
I32 f3JdsuGeneratorDiscoverInnerVlan2EtherType	1.3.6.1.4.1.2544.1.12.31.1.18.1.13	Integer32	read-only	This object describes the filter's Inner Vlan2 Ether Type.
VLA f3JdsuGeneratorDiscoverInnerVlan2Id	1.3.6.1.4.1.2544.1.12.31.1.18.1.11	VlanId	read-only	This object describes the filter's Inner Vlan2 ID.
VLA f3JdsuGeneratorDiscoverInnerVlan2Pri	1.3.6.1.4.1.2544.1.12.31.1.18.1.12	VlanPriority	read-only	This object describes the filter's Inner Vlan2 Priority.
T/F f3JdsuGeneratorDiscoverItemIfSaved	1.3.6.1.4.1.2544.1.12.31.1.18.1.21	TruthValue	read-only	Indicates whether the discoverd item saved status.
ITE f3JdsuGeneratorDiscoverItemOperation	1.3.6.1.4.1.2544.1.12.31.1.18.1.20	ItemOperation	read-write	action save the discoverd items.
T/F f3JdsuGeneratorDiscoverOuterVlanEnabled	1.3.6.1.4.1.2544.1.12.31.1.18.1.2	TruthValue	read-only	This object describes whether the filter's Outer Vlan enabled.
I32 f3JdsuGeneratorDiscoverOuterVlanEtherType	1.3.6.1.4.1.2544.1.12.31.1.18.1.5	Integer32	read-only	This object describe the filter's Outer Vlan Ether Type.
VLA f3JdsuGeneratorDiscoverOuterVlanId	1.3.6.1.4.1.2544.1.12.31.1.18.1.3	VlanId	read-only	This object describes the filter's Outer Vlan ID.
VLA f3JdsuGeneratorDiscoverOuterVlanPri	1.3.6.1.4.1.2544.1.12.31.1.18.1.4	VlanPriority	read-only	This object describes the filter's Outer Vlan Priority.
JDS f3JdsuGeneratorDiscoverPayloadType	1.3.6.1.4.1.2544.1.12.31.1.18.1.15	JdsuGeneratorPayloadType	read-only	Indicates the type of payload the remaining test frame shall contain, either fixed (incremental bytes or repeated bytes) or random (according to IEEE short continuous random test pattern). Default is random. This payload starts after the Ethernet frame header (including all VLAN tags).
f3JdsuGeneratorDiscoverTable	1.3.6.1.4.1.2544.1.12.31.1.18		not-accessible	A list of entries corresponding to JDSU Generator Discover Information.
STR f3JdsuGeneratorDiscoverUnitTextId	1.3.6.1.4.1.2544.1.12.31.1.18.1.17	DisplayString	read-only	Indicates the string from remote device. Normally it is system name of remote device.
DIS f3JdsuGeneratorDiscoveryAction	1.3.6.1.4.1.2544.1.12.31.1.17	DiscoveryAction	read-write	Indicates the discovery action on the JDSU generator.
I32 f3JdsuGeneratorFrameLength	1.3.6.1.4.1.2544.1.12.31.1.16	Integer32	read-write	Indicates the length of the frame which shall be injected, The size range for all ports is from 64 to 9600.
JDS f3JdsuGeneratorFrameType	1.3.6.1.4.1.2544.1.12.31.1.14	JdsuGeneratorFrameType	read-write	This object describe the filter's frame type. Its default value is 802.3.
T/F f3JdsuGeneratorInnerVlan1Enabled	1.3.6.1.4.1.2544.1.12.31.1.6	TruthValue	read-write	This object describes whether the filter's Inner Vlan1 enabled.
U32 f3JdsuGeneratorInnerVlan1EtherType	1.3.6.1.4.1.2544.1.12.31.1.9	Unsigned32	read-write	This object describes the filter's Inner Vlan1 Ether Type.
VLA f3JdsuGeneratorInnerVlan1Id	1.3.6.1.4.1.2544.1.12.31.1.7	VlanId	read-write	This object describes the filter's Inner Vlan1 ID.
VLA f3JdsuGeneratorInnerVlan1Pri	1.3.6.1.4.1.2544.1.12.31.1.8	VlanPriority	read-write	This object describes the filter's Inner Vlan1 Priority.
T/F f3JdsuGeneratorInnerVlan2Enabled	1.3.6.1.4.1.2544.1.12.31.1.10	TruthValue	read-write	This object describes whether the filter's Inner Vlan2 enabled.
U32 f3JdsuGeneratorInnerVlan2EtherType	1.3.6.1.4.1.2544.1.12.31.1.13	Unsigned32	read-write	This object describes the filter's Inner Vlan2 Ether Type.
VLA f3JdsuGeneratorInnerVlan2Id	1.3.6.1.4.1.2544.1.12.31.1.11	VlanId	read-write	This object describes the filter's Inner Vlan2 ID.
VLA f3JdsuGeneratorInnerVlan2Pri	1.3.6.1.4.1.2544.1.12.31.1.12	VlanPriority	read-write	This object describes the filter's Inner Vlan2 Priority.
T/F f3JdsuGeneratorOuterVlanEnabled	1.3.6.1.4.1.2544.1.12.31.1.2	TruthValue	read-write	This object describes whether the filter's Outer Vlan enabled.
U32 f3JdsuGeneratorOuterVlanEtherType	1.3.6.1.4.1.2544.1.12.31.1.5	Unsigned32	read-write	This object describes the filter's Outer Vlan Ether Type.
VLA f3JdsuGeneratorOuterVlanId	1.3.6.1.4.1.2544.1.12.31.1.3	VlanId	read-write	This object describes the filter's Outer VlanId.
VLA f3JdsuGeneratorOuterVlanPri	1.3.6.1.4.1.2544.1.12.31.1.4	VlanPriority	read-write	This object describes the filter's Outer Vlan Priority.
JDS f3JdsuGeneratorPayloadType	1.3.6.1.4.1.2544.1.12.31.1.15	JdsuGeneratorPayloadType	read-write	Indicates the type of payload the remaining test frame shall contain, either fixed (incremental bytes or repeated bytes) or random (according to IEEE short continuous random test pattern). Default is random. This payload starts after the Ethernet frame header (including all VLAN tags).
NUM f3JdsuGeneratorPort	1.3.6.1.4.1.2544.1.12.31.1.1	VariablePointer	read-write	This object describes the port which will raise a JDSU discovery.
f3JdsuGroup	1.3.6.1.4.1.2544.1.12.31.3.2.1			A collection of objects used to manage the JDSU functionality.
f3JdsuGroups	1.3.6.1.4.1.2544.1.12.31.3.2
f3JdsuMIB	1.3.6.1.4.1.2544.1.12.31			This module defines the JDSU MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
f3JdsuNotifications	1.3.6.1.4.1.2544.1.12.31.2
f3JdsuObjects	1.3.6.1.4.1.2544.1.12.31.1

RFC description

ADVA F3 JDSU-specific MIB for managing optical network equipment configuration and performance.

Start monitoring ADVA Optical Networking FSP150CM/CC (F3 platform) carrier Ethernet device (embedded JDSU/Viavi test-traffic generator) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download F3-JDSU-MIB

What Is F3-JDSU-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description