All MIBs › F3-JDSU-MIB › f3EthernetTrafficPortJdsuLoopbackEnabled
f3EthernetTrafficPortJdsuLoopbackEnabled
Module: F3-JDSU-MIB
OID (symbolic): F3-JDSU-MIB::f3EthernetTrafficPortJdsuLoopbackEnabled
OID (numeric): 1.3.6.1.4.1.2544.1.12.31.1.20.1.1
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: Enabled: reaction/response to JDSU in-band loopback requests and hallo requests. Disabled: Not reaction/response to JDSU in-band loopback requests and hallo requests. FPGA shall not filter the JDSU control frames to processor. From enabled to disabled, if there is already a JDSU loopback on the port, release current loopback. JDSU loopback doesn't need port in maintenance state. When JDSU Generation Enabled, this attribute can't be enabled.
What is f3EthernetTrafficPortJdsuLoopbackEnabled?
This per-port switch controls whether the port responds to inbound JDSU in-band loopback and hello requests. Disabling it while a loopback is active automatically releases that loopback, and it cannot be enabled at the same time as JDSU generation on the same port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.31.1.20.1.1 snmpwalk -v2c -c public <target> F3-JDSU-MIB::f3EthernetTrafficPortJdsuLoopbackEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.31.1.20.1.1.1 snmpget -v2c -c public <target> F3-JDSU-MIB::f3EthernetTrafficPortJdsuLoopbackEnabled.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2544.1.12.31.1.20.1.1.1 s <value>
Start monitoring ADVA Optical Networking FSP150CM/CC (F3 platform) carrier Ethernet device (embedded JDSU/Viavi test-traffic generator) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the F3-JDSU-MIB::f3EthernetTrafficPortJdsuLoopbackEnabled OID value, configure state conditions and alerts, and monitor any ADVA Optical Networking FSP150CM/CC (F3 platform) carrier Ethernet device (embedded JDSU/Viavi test-traffic generator) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2544 | advaMIB | ADVA-MIB |
| 1.3.6.1.4.1.2544.1 | products | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12 | fsp150cm | ADVA-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2544.1.12.31 | f3JdsuMIB | F3-JDSU-MIB |
| 1.3.6.1.4.1.2544.1.12.31.1 | f3JdsuObjects | F3-JDSU-MIB |
| 1.3.6.1.4.1.2544.1.12.31.1.20 | f3EthernetTrafficPortJdsuExtTable | F3-JDSU-MIB |
| 1.3.6.1.4.1.2544.1.12.31.1.20.1 | f3EthernetTrafficPortJdsuExtEntry | F3-JDSU-MIB |
| 1.3.6.1.4.1.2544.1.12.31.1.20.1.1 | f3EthernetTrafficPortJdsuLoopbackEnabled | F3-JDSU-MIB |