CM-PROTECTION-MIB

All MIBs › CM-PROTECTION-MIB

Organization: ADVA Optical Networking

Last Updated: 2010-06-23

Category: Vendor: Ceragon

Description: Manages protection switching configuration and status for Ceragon microwave radio equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CM-PROTECTION-MIB?

CM-PROTECTION-MIB is a Ceragon/ADVA Optical Networking MIB for the F3 (FSP150CM/CC) microwave radio product line, managing protection-switching configuration and status for redundant radio links. It exposes configuration data (switch mode, revertive behavior, wait-to-restore timing, working/protection port assignment) as well as operational status showing which port is currently carrying traffic. It is directly a hardware/fault-status monitoring MIB: cmFacProtGroupStatus and the work/protect port assignments reveal whether the link has failed over from its primary radio path to the backup, which is a critical indicator of a hardware fault on the working link. It is part of the Ceragon/ADVA FSP150 product-specific MIB family and would typically be used alongside other F3 platform MIBs (e.g. for physical interface/port identities). It is deployed in microwave-radio backhaul networks where operators need to know immediately when a protection switchover has occurred on a critical link. Network engineers evaluating or troubleshooting this functionality can download the CM-PROTECTION-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CM-PROTECTION-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ceragon/ADVA FSP150CM/CC microwave radio equipment

Monitoring Examples

An admin would poll cmFacProtGroupTable/Entry, keyed by cmFacProtGroupIndex, checking cmFacProtGroupStatus and comparing it against the configured cmFacProtGroupWorkPort and cmFacProtGroupProtPort to see whether traffic has failed over to the protection port. cmFacProtGroupRevertive and cmFacProtGroupWaitToRestore reveal whether the group is configured to automatically switch back to the working port once it recovers, and after how long. cmFacProtGroupAction lets an operator manually force a protection switch, and cmProtNotifications would alert the NOC in real time when an automatic switchover occurs, indicating a fault on the primary radio path.

What Can Be Monitored

protection group operational status
active working vs. protection port
switch mode and revertive configuration
wait-to-restore timer
manual/automatic protection switch actions

Imported Objects

From ADVA-MIB

fsp150cm

OBJECT-IDENTITY

From CM-ENTITY-MIB

neIndex	OBJECT-TYPE
shelfIndex	OBJECT-TYPE
slotIndex	OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
StorageType
TEXTUAL-CONVENTION
TruthValue
VariablePointer

OIDs

OID symbolic	OID numeric	Type	Access	Description
CMP cmFacProtGroupAction	1.3.6.1.4.1.2544.1.12.7.1.1.1.10	CmProtSwitchAction	read-write	User initiated protection switch action.
CMP cmFacProtGroupDirection	1.3.6.1.4.1.2544.1.12.7.1.1.1.6	CmProtSwitchDirection	read-create	Supported Protection Group Switch direction. This object is not applicable for cmFacProtGroupSwitchMode 'dualactiverx'.
cmFacProtGroupEntry	1.3.6.1.4.1.2544.1.12.7.1.1.1		not-accessible	An entry containing information applicable to a particular Protection Group.
I32 cmFacProtGroupIndex	1.3.6.1.4.1.2544.1.12.7.1.1.1.1	Integer32	read-only	Unique index value associated with the Facility Protection Group.
MAC cmFacProtGroupMacAddress	1.3.6.1.4.1.2544.1.12.7.1.1.1.13	MacAddress	read-only	This object allows retrieval of the Mac Address of the PROTECTION group.
NUM cmFacProtGroupProtPort	1.3.6.1.4.1.2544.1.12.7.1.1.1.8	VariablePointer	read-create	This object represents the PROTECT facility Network Element Port when cmFacProtGroupSwitchMode is oneplusone. In the case of dualactiverx, this represents the second active port.
T/F cmFacProtGroupRevertive	1.3.6.1.4.1.2544.1.12.7.1.1.1.4	TruthValue	read-create	Whether the Facility Protection is revertive or not. This object is not applicable for cmFacProtGroupSwitchMode 'dualactiverx'.
ROW cmFacProtGroupRowStatus	1.3.6.1.4.1.2544.1.12.7.1.1.1.12	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmFacProtGroupRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmFacProtGroupRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmFacProtGroupRowStatus object may be modified if the associated instance of this object is equal to active(1).
CMP cmFacProtGroupStatus	1.3.6.1.4.1.2544.1.12.7.1.1.1.9	CmProtGroupStatus	read-only	This object represents the PROTECTION group status.
STO cmFacProtGroupStorageType	1.3.6.1.4.1.2544.1.12.7.1.1.1.11	StorageType	read-create	The type of storage configured for this entry.
CMP cmFacProtGroupSwitchMode	1.3.6.1.4.1.2544.1.12.7.1.1.1.3	CmProtSwitchMode	read-create	Facility Protection Group's Protection Switch Mode.
cmFacProtGroupTable	1.3.6.1.4.1.2544.1.12.7.1.1		not-accessible	A list of entries corresponding to the Facility Protection Groups. Entries can be created/deleted in this table by management application action.
STR cmFacProtGroupUserLabel	1.3.6.1.4.1.2544.1.12.7.1.1.1.2	DisplayString	read-create	User Label associated with the Facility Protection Group.
I32 cmFacProtGroupWaitToRestore	1.3.6.1.4.1.2544.1.12.7.1.1.1.5	Integer32	read-create	Time in minutes to wait before reverting to Working facility in case of cmFacProtGroupRevertive set to revertive. This object is not applicable for cmFacProtGroupSwitchMode 'dualactiverx'.
NUM cmFacProtGroupWorkPort	1.3.6.1.4.1.2544.1.12.7.1.1.1.7	VariablePointer	read-create	Facility Protection Group exists between 2 facilities (ports). This object represents the WORKING facility Port.
cmFacProtUnitEntry	1.3.6.1.4.1.2544.1.12.7.1.2.1		not-accessible	An entry containing information applicable to a particular Protection Unit.
I32 cmFacProtUnitIndex	1.3.6.1.4.1.2544.1.12.7.1.2.1.1	Integer32	read-only	Unique index value associated with the Facility Protection Unit.
NUM cmFacProtUnitPort	1.3.6.1.4.1.2544.1.12.7.1.2.1.4	VariablePointer	read-only	Facility Protection Unit's points to a facility (port). This object represents the facility Network Element port.
CMP cmFacProtUnitState	1.3.6.1.4.1.2544.1.12.7.1.2.1.3	CmProtUnitState	read-only	Facility Protection Unit's State, i.e. whether active or standby.
cmFacProtUnitTable	1.3.6.1.4.1.2544.1.12.7.1.2		not-accessible	A list of entries corresponding to the Facility Protection Units.
CMP cmFacProtUnitType	1.3.6.1.4.1.2544.1.12.7.1.2.1.2	CmProtUnitType	read-only	Facility Protection Unit's Type, i.e. whether working or protect.
CMP cmMSPGroupAction	1.3.6.1.4.1.2544.1.12.7.1.3.1.11	CmProtSwitchAction	read-write	User initiated protection switch action.
T/F cmMSPGroupB2DEGTrigger	1.3.6.1.4.1.2544.1.12.7.1.3.1.6	TruthValue	read-create	B2DEG is trigger of MSP or not.
CMP cmMSPGroupDirection	1.3.6.1.4.1.2544.1.12.7.1.3.1.7	CmProtSwitchDirection	read-create	Supported Protection Group Switch direction. This object is not applicable for cmMSPGroupSwitchMode 'dualactiverx'.
cmMSPGroupEntry	1.3.6.1.4.1.2544.1.12.7.1.3.1		not-accessible	An entry containing information applicable to a particular Protection Group.
I32 cmMSPGroupIndex	1.3.6.1.4.1.2544.1.12.7.1.3.1.1	Integer32	read-only	Unique index value associated with the Multiplex Section Protection Group.
MAC cmMSPGroupMacAddress	1.3.6.1.4.1.2544.1.12.7.1.3.1.14	MacAddress	read-only	This object allows retrieval of the Mac Address of the PROTECTION group.
NUM cmMSPGroupProtPort	1.3.6.1.4.1.2544.1.12.7.1.3.1.9	VariablePointer	read-create	This object represents the PROTECT facility Network Element Port when cmMSPGroupSwitchMode is oneplusone. In the case of dualactiverx, this represents the second active port.
T/F cmMSPGroupRevertive	1.3.6.1.4.1.2544.1.12.7.1.3.1.4	TruthValue	read-create	Whether the Multiplex Section Protection is revertive or not. This object is not applicable for cmMSPGroupSwitchMode 'dualactiverx'.
ROW cmMSPGroupRowStatus	1.3.6.1.4.1.2544.1.12.7.1.3.1.13	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmMSPGroupRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmMSPGroupRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmMSPGroupRowStatus object may be modified if the associated instance of this object is equal to active(1).
CMP cmMSPGroupStatus	1.3.6.1.4.1.2544.1.12.7.1.3.1.10	CmProtGroupStatus	read-only	This object represents the PROTECTION group status.
STO cmMSPGroupStorageType	1.3.6.1.4.1.2544.1.12.7.1.3.1.12	StorageType	read-create	The type of storage configured for this entry.
CMP cmMSPGroupSwitchMode	1.3.6.1.4.1.2544.1.12.7.1.3.1.3	CmProtSwitchMode	read-create	Multiplex Section Protection Group's Protection Switch Mode.
cmMSPGroupTable	1.3.6.1.4.1.2544.1.12.7.1.3		not-accessible	A list of entries corresponding to the Multiplex Section Protection Groups. Entries can be created/deleted in this table by management application action.
STR cmMSPGroupUserLabel	1.3.6.1.4.1.2544.1.12.7.1.3.1.2	DisplayString	read-create	User Label associated with the Multiplex Section Protection Group.
I32 cmMSPGroupWaitToRestore	1.3.6.1.4.1.2544.1.12.7.1.3.1.5	Integer32	read-create	Time in minutes to wait before reverting to Working facility in case of cmMSPGroupRevertive set to revertive. This object is not applicable for cmMSPGroupSwitchMode 'dualactiverx'.
NUM cmMSPGroupWorkPort	1.3.6.1.4.1.2544.1.12.7.1.3.1.8	VariablePointer	read-create	Multiplex Section Protection Group exists between 2 facilities (ports). This object represents the WORKING facility Port.
cmMSProtObjectGroup	1.3.6.1.4.1.2544.1.12.7.3.2.2			A collection of objects used to manage the Multiplex Section Protection Object group.
cmMSPUnitEntry	1.3.6.1.4.1.2544.1.12.7.1.4.1		not-accessible	An entry containing information applicable to a particular Protection Unit.
I32 cmMSPUnitIndex	1.3.6.1.4.1.2544.1.12.7.1.4.1.1	Integer32	read-only	Unique index value associated with the Multiplex Section Protection Unit.
NUM cmMSPUnitPort	1.3.6.1.4.1.2544.1.12.7.1.4.1.4	VariablePointer	read-only	Facility Protection Unit's points to a facility (port). This object represents the facility Network Element port.
CMP cmMSPUnitState	1.3.6.1.4.1.2544.1.12.7.1.4.1.3	CmProtUnitState	read-only	Multiplex Section Protection Unit's State, i.e. whether active or standby.
cmMSPUnitTable	1.3.6.1.4.1.2544.1.12.7.1.4		not-accessible	A list of entries corresponding to the Multiplex Section Protection Units.
CMP cmMSPUnitType	1.3.6.1.4.1.2544.1.12.7.1.4.1.2	CmProtUnitType	read-only	Multiplex Section Protection Unit's Type, i.e. whether working or protect.
cmProtCompliance	1.3.6.1.4.1.2544.1.12.7.3.1.1			Describes the requirements for conformance to the CM Prot group.
cmProtCompliances	1.3.6.1.4.1.2544.1.12.7.3.1
cmProtConformance	1.3.6.1.4.1.2544.1.12.7.3
cmProtectionMIB	1.3.6.1.4.1.2544.1.12.7			This module defines the Protection MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
cmProtGroups	1.3.6.1.4.1.2544.1.12.7.3.2
cmProtNotifications	1.3.6.1.4.1.2544.1.12.7.2
cmProtObjectGroup	1.3.6.1.4.1.2544.1.12.7.3.2.1			A collection of objects used to manage the Protection Object group.
cmProtObjects	1.3.6.1.4.1.2544.1.12.7.1

RFC description

Defines protection switching modes and configuration for ADVA Optical Networking F3 FSP150CM/CC product lines supporting 1+1 and ring protection.

Start monitoring ADVA/Ceragon FSP150 CM/CC (F3) microwave & Carrier Ethernet transport platform with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CM-PROTECTION-MIB

What Is CM-PROTECTION-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description