F3-ESM-MIB

All MIBs › F3-ESM-MIB

Organization: ADVA Optical Networking

Last Updated: 2012-09-30

Category: Domain: Telco/Transport, Vendor: ADVA Optical

Description: ADVA Optical Networking F3 platform MIB for Ethernet Service Management (ESM), defining service-level attributes and performance.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is F3-ESM-MIB?

F3-ESM-MIB is ADVA Optical Networking's Ethernet Service Manager MIB for the FSP150CM/CC platform, providing a generic mechanism to attach configuration attributes and arbitrary name/value pairs to Ethernet service entities on the device. It exposes configuration-oriented data rather than raw counters: a table associating configuration objects with entities elsewhere in the F3 object model, and a name-value pair table for flexible per-service settings. As a monitoring tool it is mainly useful for confirming that service-level configuration (row status, storage type, and custom attribute values) is present and consistent on a device, which indirectly reflects the software/provisioning state of Ethernet services rather than hardware health. It depends on other F3-platform MIBs (such as the flow point and connect guard modules) for the entities it decorates, since esmConfigAssociatedEntity references objects defined elsewhere. It is deployed alongside other F3 MIBs on ADVA FSP150 boxes used for carrier Ethernet service delivery. Engineers can download the F3-ESM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in F3-ESM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ADVA FSP150CM/CC carrier Ethernet access/aggregation device

Monitoring Examples

A management system would walk esmConfigTable/esmConfigEntry keyed by esmConfigIndex to see which service entity esmConfigAssociatedEntity points to and confirm esmConfigRowStatus is active for provisioned services. The esmNameValuePairTable lets an admin inspect esmNameValuePairName/esmNameValuePairValue pairs attached to a given config entry, useful for auditing custom service tags or feature flags that other tables don't model directly. A row left in notInService within esmConfigRowStatus would flag an incompletely provisioned Ethernet service.

What Can Be Monitored

service configuration row status
associated service entity
custom name/value service attributes
configuration storage type

Imported Objects

From ADVA-MIB

fsp150cm

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
StorageType
TEXTUAL-CONVENTION
VariablePointer

OIDs

OID symbolic	OID numeric	Type	Access	Description
f3ESMMIB	1.3.6.1.4.1.2544.1.12.23			This module defines the Ethernet Service Manager MIB defitinions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
f3EsmConfigObjects	1.3.6.1.4.1.2544.1.12.23.1
esmConfigTable	1.3.6.1.4.1.2544.1.12.23.1.1		not-accessible	This table has list of entries with which FSPNM can associate some information in the form of name-value pairs. NOTE: This table is for FSPNM use only.
esmConfigEntry	1.3.6.1.4.1.2544.1.12.23.1.1.1		not-accessible	The conceptual row in esmConfigTable.
U32 esmConfigIndex	1.3.6.1.4.1.2544.1.12.23.1.1.1.1	Unsigned32	not-accessible	This is the unique index for ESM Config.
NUM esmConfigAssociatedEntity	1.3.6.1.4.1.2544.1.12.23.1.1.1.2	VariablePointer	read-create	This is the entity with which name-value pairs shall be associated.
STO esmConfigStorageType	1.3.6.1.4.1.2544.1.12.23.1.1.1.3	StorageType	read-create	The storage type for this conceptual row.
ROW esmConfigRowStatus	1.3.6.1.4.1.2544.1.12.23.1.1.1.4	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of esmConfigRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with neRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The esmConfigRowStatus object may be modified if the associated instance of this object is equal to active(1).
esmNameValuePairTable	1.3.6.1.4.1.2544.1.12.23.1.2		not-accessible	This table has name-value pairs associated with entities. NOTE: This table is for FSPNM use only.
esmNameValuePairEntry	1.3.6.1.4.1.2544.1.12.23.1.2.1		not-accessible	The conceptual row in esmNameValuePairTable.
STR esmNameValuePairName	1.3.6.1.4.1.2544.1.12.23.1.2.1.1	DisplayString	not-accessible	This is the name in the name-value pair.
STR esmNameValuePairValue	1.3.6.1.4.1.2544.1.12.23.1.2.1.2	DisplayString	read-create	This is the value in the name-value pair.
STO esmNameValuePairStorageType	1.3.6.1.4.1.2544.1.12.23.1.2.1.3	StorageType	read-create	The storage type for this conceptual row.
ROW esmNameValuePairRowStatus	1.3.6.1.4.1.2544.1.12.23.1.2.1.4	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of esmNameValuePairRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with neRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The esmNameValuePairRowStatus object may be modified if the associated instance of this object is equal to active(1).
f3EsmConformance	1.3.6.1.4.1.2544.1.12.23.2
f3EsmCompliances	1.3.6.1.4.1.2544.1.12.23.2.1
f3EsmCompliance	1.3.6.1.4.1.2544.1.12.23.2.1.1			Describes the requirements for conformance to the F3-ESM-MIB compilance.
f3EsmGroups	1.3.6.1.4.1.2544.1.12.23.2.2
esmConfigGroup	1.3.6.1.4.1.2544.1.12.23.2.2.1			A collection of objects used to manage the EMS Configuration objects.
esmNameValuePairGroup	1.3.6.1.4.1.2544.1.12.23.2.2.2			A collection of objects used to manage the EMS Name-Value Pair objects.

RFC description

Ethernet Service Manager configuration for ADVA FSP150 optical transport platforms.

Start monitoring ADVA Optical Networking FSP150CM/CC (F3 platform) carrier Ethernet device (Ethernet Service Manager) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download F3-ESM-MIB

What Is F3-ESM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description