All MIBs › ExaltComProducts
Organization: Exalt
Last Updated: 2013-04-29
Category: Domain: Wireless, Vendor: ExaltComm
Description:
Assigns the product OIDs that identify individual Exalt Communications microwave backhaul product models.
Imported Objects
From ExaltComm
| AcmModulationT | |
| AlarmLevelT | |
| AuxNmsMode | |
| EnableStatusT | |
| EthAuxStatusT | |
| EthMainStatusT | |
| EthPortMode | |
| ExaltEnableT | |
| FileTransferStartT | |
| FileTransferTypeT | |
| Led4ColorT | |
| NtpClientEnableT | |
| Te1LboT | |
| Te1LineCodeT | |
| Te1LoopBackModeT | |
| Te1StatusT | |
| TimeZoneT | |
| VlanGroupT | |
| VlanStatusT | |
| exaltcommunications | OBJECT-IDENTITY |
From SNMPv2-CONF
| OBJECT-GROUP |
From SNMPv2-SMI
| Gauge32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-IDENTITY | |
| OBJECT-TYPE |
From SNMPv2-TC
| DisplayString | |
| TEXTUAL-CONVENTION |
What Is ExaltComProducts?
ExaltComProducts is a companion enterprise MIB module that registers OID identifiers for specific Exalt Communications microwave backhaul product models, sitting beneath the vendor's ExaltComm root namespace. Like other product-registration modules, it does not define runtime data objects itself; it exists purely so that an SNMP agent's sysObjectID can identify which specific Exalt hardware model is being managed. It therefore has no direct monitoring role for hardware/software status such as uptime or RF performance — that data is exposed by Exalt's functional MIBs once the product model has been identified via these OIDs. It depends only on the base SNMPv2-SMI registration conventions and the ExaltComm enterprise root under which it is nested. It is used whenever a management station reads sysObjectID from an Exalt radio to determine the exact product model before applying model-specific monitoring templates. Browsing the ExaltComProducts OID tree lets an engineer quickly confirm which specific Exalt hardware model corresponds to a given sysObjectID value.
IPNetwork Monitor allows you to monitor SNMP objects defined in ExaltComProducts. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Exalt EX-s Series — current software-configurable carrier-class microwave backhaul radio, 6-40 GHz licensed bands
Monitoring Examples
This module contains only product-model OID registrations and no runtime objects, so there is no monitoring-for-anomaly scenario to describe; a management station would instead match a polled sysObjectID against these OIDs purely to identify the specific Exalt backhaul radio model in use.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| productsMIB | 1.3.6.1.4.1.25651.1 | Exalt devices | ||
| productsMIBNotifications | 1.3.6.1.4.1.25651.1.1 | |||
| productsMIBObjects | 1.3.6.1.4.1.25651.1.2 | |||
| radioInfo | 1.3.6.1.4.1.25651.1.2.1 | Common Radio Information to all Exalt devices. | ||
| STR modelName | 1.3.6.1.4.1.25651.1.2.1.1 | DisplayString | read-only | A descriptive name for the Radio. See Web, Radio Information, Model Name. |
| STR partNumber | 1.3.6.1.4.1.25651.1.2.1.2 | DisplayString | read-only | The Part Number of the Radio. See Web, Radio Information, Part Number. |
| STR serialNumber | 1.3.6.1.4.1.25651.1.2.1.3 | DisplayString | read-only | The Radio Serial Number. See Web, Radio Inforamtion, Serial Number. |
| STR interfaceType | 1.3.6.1.4.1.25651.1.2.1.4 | DisplayString | read-only | The Interfaces available on this radio. Ethernet, T1/E1, etc. See Web, Radio Information, Interface Type. |
| STR firmwareVersion | 1.3.6.1.4.1.25651.1.2.1.5 | DisplayString | read-only | The Radio Firmware Version. See Web, Radio Information, Firmware Version. |
| STR bootVersion | 1.3.6.1.4.1.25651.1.2.1.6 | DisplayString | read-only | The Radio Boot Code Version. See Web, Radio Information, Boot Version. |
| STR rdkDbVer | 1.3.6.1.4.1.25651.1.2.1.11 | DisplayString | read-only | The Device RDK Database Version. See Web, Radio Information, RDK Database Version. |
| STR txFreqRange | 1.3.6.1.4.1.25651.1.2.1.12 | DisplayString | read-only | The Radio Tx Frequency Range. FDD radios have a Tx and Rx frequency range. See Web, Radio Information, RF Transmit range. TDD radios have one frequency range. See Web, Radio Information, RF Frequency Band. |
| STR rxFreqRange | 1.3.6.1.4.1.25651.1.2.1.13 | DisplayString | read-only | The Radio Rx Frequency Range. FDD radios have a Tx and Rx frequency range. See Web, Radio Information, RF Receive range. TDD radios have one frequency range. See Web, Radio Information, RF Frequency Band. |
| STR rfFreqBand | 1.3.6.1.4.1.25651.1.2.1.14 | DisplayString | read-only | The Device Frequency Band (Range). TDD radios have N/A value in this field. FDD radios have TX High or TX Low depending on used diplexer and Transmit frequency. See Web, Radio Information, Tx Band. |
| STR hwId | 1.3.6.1.4.1.25651.1.2.1.15 | DisplayString | read-only | The Device Hardware ID number. See Web, Radio Information, Hardware ID number |
| STR modelNumber | 1.3.6.1.4.1.25651.1.2.1.16 | DisplayString | read-only | The Model Number of the Radio. See Web, Radio Information, Model Number |
| radioAdmin | 1.3.6.1.4.1.25651.1.2.2 | Radio Administration parameters. | ||
| STR sysDate | 1.3.6.1.4.1.25651.1.2.2.1 | DisplayString | read-write | The Radio System Date, MM/DD/YYYY. See Web, Administration, Settings, Date. To make permanent, write save to commitAdminSettings after change. After commit, SNMP restarts and will be down for 30 seconds. |
| STR sysTime | 1.3.6.1.4.1.25651.1.2.2.2 | DisplayString | read-write | The Radio System Time, HH:MM:SS, as 24 hours. See Web, Administration, Settings, Time. To make permanent, write save to commitAdminSettings after change. After commit, SNMP restarts and will be down for 30 seconds. |
| radioName | 1.3.6.1.4.1.25651.1.2.2.3 | |||
| STR rnLocal | 1.3.6.1.4.1.25651.1.2.2.3.1 | DisplayString | read-write | The user specifiable Radio Name for this radio. See Web, Administration, Settings, Radio Name. To make permanent, write save to commitAdminSettings after change. |
| STR rnRemote | 1.3.6.1.4.1.25651.1.2.2.3.2 | DisplayString | read-only | The Radio Name of the Radio at the far end of this RF Link. Can only be set at that radio. See Web, Administration, Settings, Radio Name. |
| STR linkName | 1.3.6.1.4.1.25651.1.2.2.4 | DisplayString | read-write | The user specifiable Link Name for this radio. See Web, Administration, Settings, Link Name. To make permanent, write save to commitAdminSettings after change. |
| STR linkSecKey | 1.3.6.1.4.1.25651.1.2.2.5 | DisplayString | read-write | The Link Security Key must match on both ends of an RF Link for traffic to pass. See Web, Administration, Settings, Link Security Key. To make permanent, write save to commitAdminSettings after change. |
| STR adminPassword | 1.3.6.1.4.1.25651.1.2.2.6 | DisplayString | read-write | The password for admin login to Web/CLI. See Web, Administration, Settings, Admin Password. To make permanent, write save to commitAdminSettings after change. |
| STR userPassword | 1.3.6.1.4.1.25651.1.2.2.7 | DisplayString | read-write | The password for user login to Web/CLI. See Web, Administration, Settings, User Password. To make permanent, write save to commitAdminSettings after change. |
| ipAddress | 1.3.6.1.4.1.25651.1.2.2.8 | |||
| IP ipLocal | 1.3.6.1.4.1.25651.1.2.2.8.1 | IpAddress | read-write | The IP address of local radio. This IP address is used to manage radio. See Web, Administration, Settings, IP Address. To make permanent, write save to commitAdminSettings after change. |
| IP ipRemote | 1.3.6.1.4.1.25651.1.2.2.8.2 | IpAddress | read-only | The IP address of the remote Radio. This IP address is used to manage Remote radio. Can only be set at that radio. See Web, Administration, Settings, IP Address. |
| IP subnetMask | 1.3.6.1.4.1.25651.1.2.2.9 | IpAddress | read-write | The Subnet Mask for IP address of local radio. See Web, Administration, Settings, IP Mask. To make permanent, write save to commitAdminSettings after change. |
| STR ipAddressNetmask | 1.3.6.1.4.1.25651.1.2.2.10 | DisplayString | read-write | The IP address and Subnet Mask of local radio. ie 10.0.0.1/24. To make permanent, write save to commitAdminSettings after change. |
| IP defaultGateway | 1.3.6.1.4.1.25651.1.2.2.11 | IpAddress | read-write | The Default Gateway for local radio port. See Web, Administration, Settings, Default Gateway. To make permanent, write save to commitAdminSettings after change. |
| INT aesEnable | 1.3.6.1.4.1.25651.1.2.2.12 | INTEGER | read-write | The AES enable(0)/disable(1). AES (Advance Encryption Standard) can be implemented to provide additional data security for the wireless link. This function requires an upgrade license key (purchased separately). See Web, Administration, Settings, AES Settings, Enable AES. To make permanent, write save to commitAdminSettings after change. |
| STR aesKey | 1.3.6.1.4.1.25651.1.2.2.13 | DisplayString | read-write | The symmetric AES key for encrypt/decrypt payload data. Different bitlength encryption license keys (for example, 128-bit and 256-bit) are available, depending on model type and license type. AES Key should match both on local radio and far end radio. See Web, Administration, Settings, AES Settings, AES Key. To make permanent, write save to commitAdminSettings after change. |
| STR licKey | 1.3.6.1.4.1.25651.1.2.2.14 | DisplayString | read-write | The license key which defines radio features and capabilities. See Web, Administration, Settings, License Key. To make permanent, write save to commitAdminSettings after change. |
| snmpConfig | 1.3.6.1.4.1.25651.1.2.2.17 | |||
| IP trapIpaddr | 1.3.6.1.4.1.25651.1.2.2.17.1 | IpAddress | read-write | The IP address to which the SNMP traps are directed. See Web, Administration, SNMP, Traps, Trap Destination IP Address. |
| ENA trapAuth | 1.3.6.1.4.1.25651.1.2.2.17.2 | EnableStatusT | read-write | Authentication trap enable(1)/disable(0). This is an SNMP standard trap when password information for SNMP is incorrect. See Web, Administration, SNMP, Traps, Authentication Trap. |
| ENA trapReboot | 1.3.6.1.4.1.25651.1.2.2.17.3 | EnableStatusT | read-write | Reboot trap enable(0)/disable(1). This trap is sent after any radio reboot to inform the manager of the reboot status. See Web, Administration, SNMP, Traps, Radio Reboot Trap. |
| ENA trapLocLinkStat | 1.3.6.1.4.1.25651.1.2.2.17.4 | EnableStatusT | read-write | Local Link Status trap enable(0)/disable(1). This trap is sent when Link is in errored state (equivalent to the Link LED). See Web, Administration, SNMP, Traps, Local Link Status Trap. |
| ENA trapLocAlarmStat | 1.3.6.1.4.1.25651.1.2.2.17.5 | EnableStatusT | read-write | Local Alarm Status trap enable(0)/disable(1). This trap is sent when local radio Status is in errored state (equivalent to the Status LED). See Web, Administration, SNMP, Traps, Local Radio Status Trap. |
| ENA trapRemAlarmStat | 1.3.6.1.4.1.25651.1.2.2.17.6 | EnableStatusT | read-write | Remote Alarm Status trap enable(0)/disable(1). This trap is sent when remote radio Status is in errored state (equivalent to the Status LED). See Web, Administration, SNMP, Traps, Remote Radio Status Trap. |
| ENA trapLocRslStat | 1.3.6.1.4.1.25651.1.2.2.17.7 | EnableStatusT | read-write | Local RSL Status trap enable(0)/disable(1). This trap is sent when the local RSL drops below the value set in the RSL Threshold Value (dBm) field. See Web, Administration, SNMP, Traps, Local RSL Status Trap. |
| ENA trapLocTempStat | 1.3.6.1.4.1.25651.1.2.2.17.8 | EnableStatusT | read-write | Local Temperature Status trap enable(0)/disable(1). This trap is sent when the internal temperature reaches the warning point. See Web, Administration, SNMP, Traps, Temperature Status Trap. |
| INT trapLocRslThreshold | 1.3.6.1.4.1.25651.1.2.2.17.9 | INTEGER | read-write | Local RSL Threshold. Exalt recommends that this trap be set to a value 5dBm or 10dBm above the threshold as a warning that the system has faded and may be approaching an outage. See Web, Administration, SNMP, Traps, Threshold Value. |
| ENA trapv1Enable | 1.3.6.1.4.1.25651.1.2.2.17.10 | EnableStatusT | read-write | SNMPv1 Traps enable(0)/disable(1). Enables traps for SNMP protocol version 1. See Web, Administration, SNMP, Traps, Enable SNMPv1 Traps. |
| ENA trapv2cEnable | 1.3.6.1.4.1.25651.1.2.2.17.11 | EnableStatusT | read-write | SNMPv2c Traps enable(0)/disable(1). Enables traps for SNMP protocol version 2c. See Web, Administration, SNMP, Traps, Enable SNMPv2c Traps. |
| ENA trapv3Enable | 1.3.6.1.4.1.25651.1.2.2.17.12 | EnableStatusT | read-write | SNMPv3 Traps enable(0)/disable(1). Enables traps for SNMP protocol version 3. See Web, Administration, SNMP, Traps, Enable SNMPv3 Traps. |
| ntp | 1.3.6.1.4.1.25651.1.2.2.18 | NTP and Time zone configuration. | ||
| NTP ntpClientEnable | 1.3.6.1.4.1.25651.1.2.2.18.1 | NtpClientEnableT | read-write | this mib to enable/disable the NTP client in the radio. 0 - disable NTP client. 1 - enable with 1 NTP server. 2 - enable with 2 NTP servers. 3 - enable with 3 NTP servers. 4 - enable with 4 NTP servers. |
| STR ntpServer1IpAddr | 1.3.6.1.4.1.25651.1.2.2.18.2 | DisplayString | read-write | IP address for the first NTP server in xxx.xxx.xxx.xxx format |
| STR ntpServer2IpAddr | 1.3.6.1.4.1.25651.1.2.2.18.3 | DisplayString | read-write | IP address for the second NTP server in xxx.xxx.xxx.xxx format |
| STR ntpServer3IpAddr | 1.3.6.1.4.1.25651.1.2.2.18.4 | DisplayString | read-write | IP address for the third NTP server in xxx.xxx.xxx.xxx format |
| STR ntpServer4IpAddr | 1.3.6.1.4.1.25651.1.2.2.18.5 | DisplayString | read-write | IP address for the forth NTP server in xxx.xxx.xxx.xxx format |
| TIM ntpTimeZoneSelect | 1.3.6.1.4.1.25651.1.2.2.18.6 | TimeZoneT | read-write | Time Zone selection. 0 - (GMT-11:00) Samoa 1 - (GMT-10.00) Hawaii 2 - (GMT-09:00) Alaska 3 - (GMT-08:00) Pacific Time 4 - (GMT-07:00) Arizona 5 - (GMT-07:00) Montain Time 6 - (GMT-06:00) Central Time 7 - (GMT-05:00) Eastern Time 8 - (GMT-05:00) Indiana (East) 9 - (GMT-04:00) Atlantic Time (Canada) 10- (GMT) Coordinated Universal Time 11- (GMT) London 12- (GMT+01:00) Berlin 13- (GMT+01:00) Belgrade 14- (GMT+01:00) Paris 15- (GMT+02:00) Cairo 16- (GMT+02:00) Helsinki 17- (GMT+03:00) Baghdad 18- (GMT+03:00) Moscow 19- (GMT+03:30) Tehran 20- (GMT+04:30) Kabul 21- (GMT+05:00) Karachi 22- (GMT+07:00) Bangkok 23- (GMT+08:00) Shanghai 24- (GMT+08:00) Taipei 25- (GMT+09:00) Tokyo 26- (GMT+09:00) Seoul 27- (GMT+10:00) Sydney 28- (GMT+10:00) Vladivostok |
| STR commitNtpSettings | 1.3.6.1.4.1.25651.1.2.2.18.1000 | DisplayString | read-write | This command allows saving or clear the NTP and Tome Zone configuration. If the save includes the change of time zone, the radio will automatically reboot to take effect the newly selected time zone. Option strings to be written are: save, clear, correspondingly saving changes to configuration to the persistent storage or clearing unsaved changes. |
| STR commitAdminSettings | 1.3.6.1.4.1.25651.1.2.2.1000 | DisplayString | read-write | The Commit Administration settings command. Valid values: 'save', 'clear'. Configuration changes via SNMP do not take effect until 'save' (Commit) command is sent to this parameter. 'clear' (Cancel) command is used to cancel configuration changes before commit operation. In case of invalid configuration this parameter contains text description of the problem. |
| radioConfig | 1.3.6.1.4.1.25651.1.2.3 | The Radio Configuration Section. | ||
| systemConfig | 1.3.6.1.4.1.25651.1.2.3.1 | This is the device specific configuration section. | ||
| STR commitSystemSettings | 1.3.6.1.4.1.25651.1.2.3.1.1000 | DisplayString | read-write | The Commit System Configuration settings command. Valid values: 'save', 'clear'. Configuration changes via SNMP do not take effect until 'save' (Commit) command is sent to this parameter. 'clear' (Cancel) command is used to cancel configuration changes before commit operation. In case of invalid configuration this parameter contains text description of the problem. |
| interface | 1.3.6.1.4.1.25651.1.2.3.2 | Radio Interfaces Configuration section. | ||
| te1 | 1.3.6.1.4.1.25651.1.2.3.2.2 | T1,E1 interfaces Configuration section. Section allows to configure T1/E1 ports on the radio if any. | ||
| G32 te1NumChannels | 1.3.6.1.4.1.25651.1.2.3.2.2.1 | Gauge32 | read-only | The Number of T1 or E1 channels supported by the Radio. |
| G32 te1NumActiveChannels | 1.3.6.1.4.1.25651.1.2.3.2.2.2 | Gauge32 | read-only | The Current number of channels available, based on bandwitdh of the RF link and the license key. |
| INT selectT1orE1 | 1.3.6.1.4.1.25651.1.2.3.2.2.3 | INTEGER | read-write | Select operation mode of T1/E1 interfaces. Either T1(0) or E1(1). See Web, Configuration, Interface, T1/E1, Set To E1/T1 Mode button. |
| te1Interfaces | 1.3.6.1.4.1.25651.1.2.3.2.2.4 | not-accessible | Attributes for T1 or E1 ports. | |
| te1Interface | 1.3.6.1.4.1.25651.1.2.3.2.2.4.1 | not-accessible | An entry in the T1/E1 Attribute table. | |
| TE1 te1Status | 1.3.6.1.4.1.25651.1.2.3.2.2.4.1.1 | Te1StatusT | read-write | The T1/E1 status: enable(1)/disable(0). Parameter allows to enable/disable each individual T1 channel. See Web, Configuration, Interface, T1/E1, Status. To make permanent, write save to commitTe1Settings after change. |
| TE1 t1LBO | 1.3.6.1.4.1.25651.1.2.3.2.2.4.1.2 | Te1LboT | read-write | The Line Build Out length range. Valid values (ft): lbo0to133(0), lbo133to266(1), lbo266to399(2), lbo399to533(3), lbo533to655(4). See Web, Configuration, Interface, T1/E1, LBO. To make permanent, write save to commitTe1Settings after change. |
| TE1 te1AIS | 1.3.6.1.4.1.25651.1.2.3.2.2.4.1.3 | Te1StatusT | read-write | The T1/E1 AIS enabled flag: enable(1)/disable(0). If enabled, the radio places an AIS code on the output of the associated interface if and when the link fails or when there is no E1 signal available from the far end to provide the user at the local end. See Web, Configuration, Interface, T1/E1, AIS. To make permanent, write save to commitTe1Settings after change. |
| TE1 t1LineCode | 1.3.6.1.4.1.25651.1.2.3.2.2.4.1.4 | Te1LineCodeT | read-write | The T1/E1 Line Code type: b8zs(0), ami(1). See Web, Configuration, Interface, T1/E1, AIS, Line Code. To make permanent, write save to commitTe1Settings after change. |
| TE1 te1LoopBackMode | 1.3.6.1.4.1.25651.1.2.3.2.2.4.1.5 | Te1LoopBackModeT | read-write | The Loop Back Mode for a T1/E1 interface. Valid values: disabled(0), ExternalLocal(1), ExternalRemote(2), Internal(3). All loopback configurations control the loop at the Line Interface integrated circuit, which is the device wired directly to the front panel ports. See Web, Configuration, Interface, T1/E1, AIS, Loopback. To make permanent, write save to commitTe1Settings after change. |
| STR commitTe1Settings | 1.3.6.1.4.1.25651.1.2.3.2.2.1000 | DisplayString | read-write | The Commit TE1 Configuration settings command. Valid values: 'save', 'clear'. Configuration changes to TE1 ports via SNMP do not take effect until 'save' (Commit) command is sent to this parameter. 'clear' (Cancel) command is used to cancel configuration changes before commit operation. In case of invalid configuration this parameter contains text description of the problem. |
| fileManagement | 1.3.6.1.4.1.25651.1.2.3.3 | The File Management Section. This section allows to initiate Upload/Download firmware/configuration/logs, perform Firmware activation procedure. | ||
| STR currentFwFilename | 1.3.6.1.4.1.25651.1.2.3.3.1 | DisplayString | read-only | The file name of the currently running firmware. See Web, Administration, File Management, File Activation, Current File. |
| STR alternateFwFilename | 1.3.6.1.4.1.25651.1.2.3.3.2 | DisplayString | read-only | The file name of the alternate firmware image. See Web, Administration, File Management, File Activation, Alternative File. |
| STR swapFWimage | 1.3.6.1.4.1.25651.1.2.3.3.3 | DisplayString | read-write | Swap the firmware images and restart radio. To perform swap operation 'swap' command needs to be sent to this parameter. For ExtendAirG2 to perform revert to factory operation 'factory' command needs to be sent. Radio will become unavailable for several minutes. |
| fileTransfer | 1.3.6.1.4.1.25651.1.2.3.3.4 | The File Transfer Section. This section allows to initiate Upload/Download firmware/configuration/logs over TFTP protocol. | ||
| STR tftpServerIp | 1.3.6.1.4.1.25651.1.2.3.3.4.1 | DisplayString | read-write | The TFTP Server IP address. |
| STR uploadFilename | 1.3.6.1.4.1.25651.1.2.3.3.4.2 | DisplayString | read-write | The name of the file for upload operation. For configuration file uploadFilename should be always 'config.xml'. uploadFilename value should match the file name in TFTP server folder. |
| FIL transferType | 1.3.6.1.4.1.25651.1.2.3.3.4.3 | FileTransferTypeT | read-write | The file transfer type. Valid values: - uploadFirmware(0) - uploadConfig(1) - uploadRDD(2) (Valid only for TDD radios) - downloadFirmware(3) - downloadConfig(4) - downloadMIBs(5) - downloadEventLogs(6). The actual operation starts via updating transferStart parameter value. |
| FIL transferStart | 1.3.6.1.4.1.25651.1.2.3.3.4.4 | FileTransferStartT | read-write | TransferStart parameter is used to initiate file transfer operation. Send startTransfer(1) to this parameter. |
| STR transferStatus | 1.3.6.1.4.1.25651.1.2.3.3.4.5 | DisplayString | read-only | The current file transfer status. |
| STR factoryFwFilename | 1.3.6.1.4.1.25651.1.2.3.3.5 | DisplayString | read-only | The file name of the factory firmware image. See Web, Administration, File Management, File Activation, Factory File. |
| radioMonitor | 1.3.6.1.4.1.25651.1.2.4 | Monitor Various components. | ||
| alarms | 1.3.6.1.4.1.25651.1.2.4.2 | |||
| almLocal | 1.3.6.1.4.1.25651.1.2.4.2.3 | |||
| locSysAlarms | 1.3.6.1.4.1.25651.1.2.4.2.3.1 | |||
| ALA locLinkState | 1.3.6.1.4.1.25651.1.2.4.2.3.1.1 | AlarmLevelT | read-only | The Link Status Alarm. Possible values: - almNORMAL(0) - Error-free connection (BER10e-3) See Web, Monitor, Alarms, Link |
| ALA locTempAlarm | 1.3.6.1.4.1.25651.1.2.4.2.3.1.2 | AlarmLevelT | read-only | The Temperature Alarm state. Possible values: - almNORMAL(0) - Normal temprature range - almMINOR(1) - Exceeding normal temprature range See Web, Monitor, Alarms, Temperature |
| I32 locCurrentTemp | 1.3.6.1.4.1.25651.1.2.4.2.3.1.3 | Integer32 | read-only | The Internal Temperature in Celsius. |
| STR locCurrentTempS | 1.3.6.1.4.1.25651.1.2.4.2.3.1.4 | DisplayString | read-only | The Internal Temperature as a string. |
| ALA locLinkSecMismatch | 1.3.6.1.4.1.25651.1.2.4.2.3.1.9 | AlarmLevelT | read-only | This is link security mismatch alarm. This alarm tells if the Link Security Key is matching or not. Possible values: - almNORMAL(0) - Link Secutiry keys match - almMAJOR(2) - Link Secutiry keys do not match |
| ALA locLinkStateV | 1.3.6.1.4.1.25651.1.2.4.2.3.1.15 | AlarmLevelT | read-only | Vertical Link Status Alarm. -<> |
| ALA locLinkStateH | 1.3.6.1.4.1.25651.1.2.4.2.3.1.16 | AlarmLevelT | read-only | Horizontal Link Status Alarm. -<> |
| locEthAlarms | 1.3.6.1.4.1.25651.1.2.4.2.3.2 | |||
| locTE1Alarms | 1.3.6.1.4.1.25651.1.2.4.2.3.3 | |||
| LED locTe1LinkSummary | 1.3.6.1.4.1.25651.1.2.4.2.3.3.1 | Led4ColorT | read-only | The T1/E1 Link Summary LED color. |
| locTe1AlarmsEntry | 1.3.6.1.4.1.25651.1.2.4.2.3.3.2.1 | not-accessible | T1/E1 Alarms table Entry. | |
| ALA locTe1Alarm | 1.3.6.1.4.1.25651.1.2.4.2.3.3.2.1.1 | AlarmLevelT | read-only | The Alarms state for the Local T1/E1 Channel. Possible values: - almNORMAL(0) - Enabled and connection present - almMAJOR(2) - Enabled and no connection present - almDisable(3) - Disabled and no connection present - almNotAvailable(4) - T1/E1 channel is not available See Web, Monitor, Alarms, T1/E1 Input |
| almRemote | 1.3.6.1.4.1.25651.1.2.4.2.4 | |||
| remSysAlarms | 1.3.6.1.4.1.25651.1.2.4.2.4.1 | |||
| ALA remLinkState | 1.3.6.1.4.1.25651.1.2.4.2.4.1.1 | AlarmLevelT | read-only | The Link Status Alarm for far end radio. Possible values: - almNORMAL(0) - Error-free connection (BER10e-3) - almNotAvailable(4) - Telemetry is down See Web, Monitor, Alarms, Link |
| ALA remTempAlarm | 1.3.6.1.4.1.25651.1.2.4.2.4.1.2 | AlarmLevelT | read-only | The Temperature Alarm state for far end radio. Possible values: - almNORMAL(0) - Normal temprature range - almMINOR(1) - Exceeding normal temprature range - almNotAvailable(4) - Telemetry is down See Web, Monitor, Alarms, Temperature |
| I32 remCurrentTemp | 1.3.6.1.4.1.25651.1.2.4.2.4.1.3 | Integer32 | read-only | The Internal Temperature in Celsius for far end radio. |
| STR remCurrentTempS | 1.3.6.1.4.1.25651.1.2.4.2.4.1.4 | DisplayString | read-only | The internal Temperature as a string for far end radio. |
| ALA remLinkSecMismatch | 1.3.6.1.4.1.25651.1.2.4.2.4.1.9 | AlarmLevelT | read-only | This is link security mismatch alarm. This alarm tells if the Link Security Key is matching or not. Possible values: - almNORMAL(0) - Link Secutiry keys match - almMAJOR(2) - Link Secutiry keys do not match - almNotAvailable(4) - Telemetry is down |
| ALA remLinkStateV | 1.3.6.1.4.1.25651.1.2.4.2.4.1.15 | AlarmLevelT | read-only | Vertical Link Status Alarm. -<> |
| ALA remLinkStateH | 1.3.6.1.4.1.25651.1.2.4.2.4.1.16 | AlarmLevelT | read-only | Horizontal Link Status Alarm. -<> |
| remEthAlarms | 1.3.6.1.4.1.25651.1.2.4.2.4.2 | |||
| remTE1Alarms | 1.3.6.1.4.1.25651.1.2.4.2.4.3 | |||
| LED remTe1LinkSummary | 1.3.6.1.4.1.25651.1.2.4.2.4.3.1 | Led4ColorT | read-only | The T1/E1 Link Summary LED color. |
| remTe1AlarmsEntry | 1.3.6.1.4.1.25651.1.2.4.2.4.3.2.1 | not-accessible | T1/E1 Alarms table Entry. | |
| ALA remTe1Alarm | 1.3.6.1.4.1.25651.1.2.4.2.4.3.2.1.1 | AlarmLevelT | read-only | The Alarms state for the Local T1/E1 Channel of far end radio. Possible values: - almNORMAL(0) - Enabled and connection present - almMAJOR(2) - Enabled and no connection present - almDisable(3) - Disabled and no connection present - almNotAvailable(4) - Telemetry is down or T1/E1 channel is not available See Web, Monitor, Alarms, T1/E1 Input |
| performance | 1.3.6.1.4.1.25651.1.2.4.3 | |||
| perfLocal | 1.3.6.1.4.1.25651.1.2.4.3.1 | |||
| I32 locCurrentBER | 1.3.6.1.4.1.25651.1.2.4.3.1.1 | Integer32 | read-only | The Curent Bit-Error Rate as scaled integer for local radio. The BER multiplied by 1,000,000. If the link is operating perfectly, this should indicate zero. See Web, Monitor, Performance, Current BER |
| STR locCurrentBERstr | 1.3.6.1.4.1.25651.1.2.4.3.1.2 | DisplayString | read-only | The Current Bit-Error Rate as a string. |
| I32 locCurrentRSL | 1.3.6.1.4.1.25651.1.2.4.3.1.3 | Integer32 | read-only | Current RSL is the measurement of the received signal level. When the RSL falls below the threshold specification, the link disconnects and will not reconnect until the RSL is above the threshold specification. See Web, Monitor, Performance, Current RSL |
| STR locCurrentRSLstr | 1.3.6.1.4.1.25651.1.2.4.3.1.4 | DisplayString | read-only | The Current RSL as a string. |
| I32 locErrorDuration | 1.3.6.1.4.1.25651.1.2.4.3.1.5 | Integer32 | read-only | The Error Duration indicates the total number of seconds that occurred where there was at least one bit error since the last time that the radio statistics counter was reset. See Web, Monitor, Performance, Errored Seconds |
| STR locErrorDurationStr | 1.3.6.1.4.1.25651.1.2.4.3.1.6 | DisplayString | read-only | The Error Duration as a formatted string. |
| I32 locUnavailDuration | 1.3.6.1.4.1.25651.1.2.4.3.1.7 | Integer32 | read-only | Unavailable Duration keeps track of every second where the BER equals or exceeds 1x10-3, as well as any seconds where there is a complete loss of radio communication. See Web, Monitor, Performance, Unavailable Seconds |
| STR locUnavailDurationStr | 1.3.6.1.4.1.25651.1.2.4.3.1.8 | DisplayString | read-only | The Unavailable Duration as a formatted string. |
| I32 locMinRSL | 1.3.6.1.4.1.25651.1.2.4.3.1.9 | Integer32 | read-only | The Minimum RSL indicates the worst (lowest) received signal level that occurred since the last counter reset. See Web, Monitor, Performance, Minimum RSL |
| STR locMinRSLstr | 1.3.6.1.4.1.25651.1.2.4.3.1.10 | DisplayString | read-only | The Minimum RSL value as a string. |
| STR locMinRSLtimestamp | 1.3.6.1.4.1.25651.1.2.4.3.1.11 | DisplayString | read-only | The Minimum RSL Timestamp indicates the date and time when the Minimum RSL occurred. See Web, Monitor, Performance, Minimum RSL Timestamp |
| I32 locMaxRSL | 1.3.6.1.4.1.25651.1.2.4.3.1.12 | Integer32 | read-only | The Maximum RSL indicates the best (highest) RSL that occurred since the last counter reset. See Web, Monitor, Performance, Maximum RSL |
| STR locMaxRSLstr | 1.3.6.1.4.1.25651.1.2.4.3.1.13 | DisplayString | read-only | The Maximum RSL level As string. |
| I32 locSampleDuration | 1.3.6.1.4.1.25651.1.2.4.3.1.14 | Integer32 | read-only | The Sample Duration indicates the amount of time passed since the last counter reset. See Web, Monitor, Performance, Time Since Reset |
| STR locSampleDurationStr | 1.3.6.1.4.1.25651.1.2.4.3.1.15 | DisplayString | read-only | The Sample Duration value as a formatted string. |
| locEthPerfInterfaces | 1.3.6.1.4.1.25651.1.2.4.3.1.16 | not-accessible | Performance characteristics of local Ethernet interfaces | |
| locEthPerfInterfacesEntry | 1.3.6.1.4.1.25651.1.2.4.3.1.16.1 | not-accessible | An entry in the Performance characteristics of local Ethernet interfaces table | |
| I32 locEthUtilizationIn | 1.3.6.1.4.1.25651.1.2.4.3.1.16.1.1 | Integer32 | read-only | Inbound ethernet utilization (%). See Web, Analysis, Ethernet Utilization. |
| I32 locEthUtilizationOut | 1.3.6.1.4.1.25651.1.2.4.3.1.16.1.2 | Integer32 | read-only | Outbound ethernet utilization (%). See Web, Analysis, Ethernet Utilization. |
| EXA locEthUtilizationWatermarkEnabled | 1.3.6.1.4.1.25651.1.2.4.3.1.17 | ExaltEnableT | read-write | Ethernet utilization watermark enable(1)/disable(0). See Web, Analysis, Ethernet Utilization, Ethernet Utilization Watermark. |
| I32 locEthUtilizationWatermark | 1.3.6.1.4.1.25651.1.2.4.3.1.18 | Integer32 | read-write | Ethernet utilization watermark level (%). See Web, Analysis, Ethernet Utilization, Watermark level. |
| EXA locEthUtilizationWatermarkTrapEnabled | 1.3.6.1.4.1.25651.1.2.4.3.1.19 | ExaltEnableT | read-write | Ethernet utilization watermark trap enable(1)/disable(0). The watermark trap function allows administrators to receive an SNMP trap when watermark conditions are exceeded. See Web, Analysis, Ethernet Utilization, Enable Ethernet Utilization Trap. |
| I32 locEthUtilizationWatermarkTrapDuration | 1.3.6.1.4.1.25651.1.2.4.3.1.20 | Integer32 | read-write | Ethernet utilization trap limit in minutes/day (0-1440 minutes). See Web, Analysis, Ethernet Utilization, Send trap if watermark hit duration exceeds. |
| ACM locMaximumTxModulation | 1.3.6.1.4.1.25651.1.2.4.3.1.100 | AcmModulationT | read-only | The highest/maximum Tx modulation when ACM is enabled since the last counter reset. See Web, Monitor, Performance, Tx modulation. |
| ACM locActiveTxModulation | 1.3.6.1.4.1.25651.1.2.4.3.1.101 | AcmModulationT | read-only | The active Tx modulation when ACM is enabled. See Web, Monitor, Performance, Tx modulation. |
| ACM locMinimumTxModulation | 1.3.6.1.4.1.25651.1.2.4.3.1.102 | AcmModulationT | read-only | The lowest/minimum Tx modulation when ACM is enabled since the last counter reset. See Web, Monitor, Performance, Tx modulation. |
| ACM locMaximumRxModulation | 1.3.6.1.4.1.25651.1.2.4.3.1.103 | AcmModulationT | read-only | The highest/maximum Rx modulation when ACM is enabled since the last counter reset. See Web, Monitor, Performance, Rx modulation. |
| ACM locActiveRxModulation | 1.3.6.1.4.1.25651.1.2.4.3.1.104 | AcmModulationT | read-only | The active Rx modulation when ACM is enabled. See Web, Monitor, Performance, Rx modulation. |
| ACM locMinimumRxModulation | 1.3.6.1.4.1.25651.1.2.4.3.1.105 | AcmModulationT | read-only | The lowest/minimum Rx modulation when ACM is enabled since the last counter reset. See Web, Monitor, Performance, Rx modulation. |
| INT locMaximumTxEthernetThroughput | 1.3.6.1.4.1.25651.1.2.4.3.1.106 | INTEGER | read-only | The highest/maximum Tx Ethernet throughput in Mbps when ACM is enabled since the last counter reset. See Web, Monitor, Performance, Tx Ethernet Throughput. |
| INT locActiveTxEthernetThroughput | 1.3.6.1.4.1.25651.1.2.4.3.1.107 | INTEGER | read-only | The active Tx Ethernet throughput in Mbps when ACM is enabled. See Web, Monitor, Performance, Tx Ethernet Throughput. |
| INT locMinimumTxEthernetThroughput | 1.3.6.1.4.1.25651.1.2.4.3.1.108 | INTEGER | read-only | The lowest/minimum Tx Ethernet throughput in Mbps when ACM is enabled since the last counter reset. See Web, Monitor, Performance, Tx Ethernet Throughput. |
| INT locMaximumRxEthernetThroughput | 1.3.6.1.4.1.25651.1.2.4.3.1.109 | INTEGER | read-only | The highest/maximum Rx Ethernet throughput in Mbps when ACM is enabled since the last counter reset. See Web, Monitor, Performance, Rx Ethernet Throughput. |
| INT locActiveRxEthernetThroughput | 1.3.6.1.4.1.25651.1.2.4.3.1.110 | INTEGER | read-only | The active Rx Ethernet throughput in Mbps when ACM is enabled. See Web, Monitor, Performance, Rx Ethernet Throughput. |
| INT locMinimumRxEthernetThroughput | 1.3.6.1.4.1.25651.1.2.4.3.1.111 | INTEGER | read-only | The lowest/minimum Rx Ethernet throughput in Mbps when ACM is enabled since the last counter reset. See Web, Monitor, Performance, Rx Ethernet Throughput. |
| STR locResetStats | 1.3.6.1.4.1.25651.1.2.4.3.1.1000 | DisplayString | read-write | Write 'reset' to locResetStats to clear the Performance statistics. |
| perfRemote | 1.3.6.1.4.1.25651.1.2.4.3.2 | |||
| I32 remCurrentBER | 1.3.6.1.4.1.25651.1.2.4.3.2.1 | Integer32 | read-only | The Curent Bit-Error Rate as scaled integer for far end radio. The BER multiplied by 1,000,000. If the link is operating perfectly, this should indicate zero. See Web, Monitor, Performance, Current BER |
| STR remCurrentBERstr | 1.3.6.1.4.1.25651.1.2.4.3.2.2 | DisplayString | read-only | The Current Bit-Error Rate as a string. Far end radio |
| I32 remCurrentRSL | 1.3.6.1.4.1.25651.1.2.4.3.2.3 | Integer32 | read-only | Current RSL is the measurement of the received signal level. When the RSL falls below the threshold specification, the link disconnects and will not reconnect until the RSL is above the threshold specification. See Web, Monitor, Performance, Current RSL |
| STR remCurrentRSLstr | 1.3.6.1.4.1.25651.1.2.4.3.2.4 | DisplayString | read-only | The Current RSL as a string. |
| I32 remErrorDuration | 1.3.6.1.4.1.25651.1.2.4.3.2.5 | Integer32 | read-only | The Error Duration indicates the total number of seconds that occurred where there was at least one bit error since the last time that the radio statistics counter was reset. See Web, Monitor, Performance, Errored Seconds, Remote column. |
| STR remErrorDurationStr | 1.3.6.1.4.1.25651.1.2.4.3.2.6 | DisplayString | read-only | The Error Duration as a formatted string. Far end radio. |
| I32 remUnavailDuration | 1.3.6.1.4.1.25651.1.2.4.3.2.7 | Integer32 | read-only | Unavailable Duration keeps track of every second where the BER equals or exceeds 1x10-3, as well as any seconds where there is a complete loss of radio communication. See Web, Monitor, Performance, Unavailable Seconds |
| STR remUnavailDurationStr | 1.3.6.1.4.1.25651.1.2.4.3.2.8 | DisplayString | read-only | The Unavailable Duration as a formatted string. Far end radio. |
| I32 remMinRSL | 1.3.6.1.4.1.25651.1.2.4.3.2.9 | Integer32 | read-only | The Minimum RSL indicates the worst (lowest) received signal level that occurred since the last counter reset. See Web, Monitor, Performance, Minimum RSL, Remote column. |
| STR remMinRSLstr | 1.3.6.1.4.1.25651.1.2.4.3.2.10 | DisplayString | read-only | The Minimum RSL value as a string. Far end radio. |
| STR remMinRSLtimestamp | 1.3.6.1.4.1.25651.1.2.4.3.2.11 | DisplayString | read-only | The Minimum RSL Timestamp indicates the date and time when the Minimum RSL occurred. See Web, Monitor, Performance, Minimum RSL Timestamp, Remote column. |
| I32 remMaxRSL | 1.3.6.1.4.1.25651.1.2.4.3.2.12 | Integer32 | read-only | The Maximum RSL indicates the best (highest) RSL that occurred since the last counter reset. See Web, Monitor, Performance, Maximum RSL, Remote column. |
| STR remMaxRSLstr | 1.3.6.1.4.1.25651.1.2.4.3.2.13 | DisplayString | read-only | The Maximum RSL level As string. Far end radio. |
| I32 remSampleDuration | 1.3.6.1.4.1.25651.1.2.4.3.2.14 | Integer32 | read-only | The Sample Duration indicates the amount of time passed since the last counter reset. See Web, Monitor, Performance, Time Since Reset, Remote column. |
| STR remSampleDurationStr | 1.3.6.1.4.1.25651.1.2.4.3.2.15 | DisplayString | read-only | The Sample Duration value as a formatted string. Far end radio. |
| STR remResetStats | 1.3.6.1.4.1.25651.1.2.4.3.2.1000 | DisplayString | read-write | Write 'reset' to remResetStats to clear the Performance statistics. |
| userThroughput | 1.3.6.1.4.1.25651.1.2.4.5 | |||
| STR aggregateUserThroughput | 1.3.6.1.4.1.25651.1.2.4.5.1 | DisplayString | read-only | Aggregated User Throughput. For FDD radios this parameter is always equal to fullDuplexEthernetThroughput. |
| STR inboundEthernetThroughput | 1.3.6.1.4.1.25651.1.2.4.5.2 | DisplayString | read-only | Inbound Ethernet Throughput. For FDD radios this parameter is always N/A. |
| STR outboundEthernetThroughput | 1.3.6.1.4.1.25651.1.2.4.5.3 | DisplayString | read-only | Outbound Ethernet Throughput. For FDD radios this parameter is always N/A. |
| STR fullDuplexEthernetThroughput | 1.3.6.1.4.1.25651.1.2.4.5.4 | DisplayString | read-only | The Full Duplex Ethernet Throughput is determined by the combination of settings for Mode and Bandwidth. See Web, Monitor, User Throughput, Full Duplex Ethernet Throughput. |
| STR radioReboot | 1.3.6.1.4.1.25651.1.2.1000 | DisplayString | read-write | Reboot the radio device. Send 'reboot' to radioReboot parameter to reboot the radio device. |
| productsMIBConformance | 1.3.6.1.4.1.25651.1.3 | |||
| productsMIBCompliances | 1.3.6.1.4.1.25651.1.3.1 | |||
| productsMIBGroups | 1.3.6.1.4.1.25651.1.3.2 | |||
| productsAllObjects | 1.3.6.1.4.1.25651.1.3.2.1 | This automatically created object group contains all those objects that do not belong to any other OBJECT-GROUP |
RFC description
Registers product OIDs identifying specific Exalt Communications microwave backhaul product models.
Start monitoring Exalt Communications microwave backhaul radio (product ID registry) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.