All MIBs › ExaltComProducts › te1LoopBackMode
te1LoopBackMode
Module: ExaltComProducts
OID (symbolic): ExaltComProducts::te1LoopBackMode
OID (numeric): 1.3.6.1.4.1.25651.1.2.3.2.2.4.1.5
Node type: OBJECT-TYPE
Type: Te1LoopBackModeT
Access: read-write
Description:
The Loop Back Mode for a T1/E1 interface. Valid values: disabled(0), ExternalLocal(1), ExternalRemote(2), Internal(3). All loopback configurations control the loop at the Line Interface integrated circuit, which is the device wired directly to the front panel ports. See Web, Configuration, Interface, T1/E1, AIS, Loopback. To make permanent, write save to commitTe1Settings after change.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25651.1.2.3.2.2.4.1.5 snmpwalk -v2c -c public <target> ExaltComProducts::te1LoopBackMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25651.1.2.3.2.2.4.1.5.1 snmpget -v2c -c public <target> ExaltComProducts::te1LoopBackMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.25651.1.2.3.2.2.4.1.5.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.25651 | exaltcommunications | ExaltComm |
| 1.3.6.1.4.1.25651.1 | productsMIB | ExaltComProducts |
| 1.3.6.1.4.1.25651.1.2 | productsMIBObjects | ExaltComProducts |
| 1.3.6.1.4.1.25651.1.2.3 | radioConfig | ExaltComProducts |
| 1.3.6.1.4.1.25651.1.2.3.2 | interface | ExaltComProducts |
| 1.3.6.1.4.1.25651.1.2.3.2.2 | te1 | ExaltComProducts |
| 1.3.6.1.4.1.25651.1.2.3.2.2.4 | te1Interfaces | ExaltComProducts |
| 1.3.6.1.4.1.25651.1.2.3.2.2.4.1 | te1Interface | ExaltComProducts |
| 1.3.6.1.4.1.25651.1.2.3.2.2.4.1.5 | te1LoopBackMode | ExaltComProducts |