| OID symbolic | OID numeric | Type | Access | Description |
|---|
| rrUserInfo | 1.3.6.1.4.1.8603.4 | | | |
| usrSiteInfo | 1.3.6.1.4.1.8603.4.1 | | | |
| siteIdentity | 1.3.6.1.4.1.8603.4.1.1 | | | |
| STR siteId | 1.3.6.1.4.1.8603.4.1.1.1 | DisplayString | read-write | The name given to the basestation by the wireless carrier. The
siteId is controlled by the carrier. |
| STR siteName | 1.3.6.1.4.1.8603.4.1.1.2 | DisplayString | read-write | The site name as chosen by the carrier. The name may be
derived from the siteId or from the siteCity. |
| STR siteOwner | 1.3.6.1.4.1.8603.4.1.1.3 | DisplayString | read-write | The owner of the basestation. |
| STR siteInstallDate | 1.3.6.1.4.1.8603.4.1.1.4 | DisplayString | read-write | Date of installation of the basestation. |
| STR siteCommissionDate | 1.3.6.1.4.1.8603.4.1.1.5 | DisplayString | read-write | Date of completing commissioning of the basestation. |
| STR siteOtherInfo | 1.3.6.1.4.1.8603.4.1.1.6 | DisplayString | read-write | This field is reserved to store any information that the
carrier chooses to use. |
| siteLocation | 1.3.6.1.4.1.8603.4.1.2 | | | |
| STR siteStreet | 1.3.6.1.4.1.8603.4.1.2.1 | DisplayString | read-write | Street address. |
| STR siteCity | 1.3.6.1.4.1.8603.4.1.2.2 | DisplayString | read-write | City name. |
| STR siteCounty | 1.3.6.1.4.1.8603.4.1.2.3 | DisplayString | read-write | County (if applicable). |
| STR siteState | 1.3.6.1.4.1.8603.4.1.2.4 | DisplayString | read-write | State (if applicable). |
| STR sitePostalLocation | 1.3.6.1.4.1.8603.4.1.2.5 | DisplayString | read-write | Zip code or postal code (if applicable). |
| STR siteCountry | 1.3.6.1.4.1.8603.4.1.2.6 | DisplayString | read-write | Country. |
| STR siteLatitude | 1.3.6.1.4.1.8603.4.1.2.7 | FloatAsString | read-write | The site angular distance north or south of the earth's
equator, measured in degrees along a meridian. |
| STR siteLongitude | 1.3.6.1.4.1.8603.4.1.2.8 | FloatAsString | read-write | The site angular distance on the earth's surface, measured
east or west and expressed in degrees. |
| STR siteGroundElevation | 1.3.6.1.4.1.8603.4.1.2.9 | FloatAsString | read-write | The ground elevation of the site, in feet. |
| siteRfEnv | 1.3.6.1.4.1.8603.4.1.3 | | | |
| STR siteStructureType | 1.3.6.1.4.1.8603.4.1.3.1 | DisplayString | read-write | The method by which the antenna is mounted in the field.
Possible options include monopole, flagpole, self support,
water tank, etc. |
| STR siteAntennaConfig | 1.3.6.1.4.1.8603.4.1.3.2 | DisplayString | read-write | Used to indicate if the basestation antennae are configured as:
Sectorized - radiates RF energy in 1,2, or 3 sectors
Omni - radiates RF power in all directions
Simulcast Low Power - radiates RF energy to each antenna
sector by splitting the carrier's signal output after
the signal is amplified, thus requiring a single power
amplifier
Simulcast High Power - radiates the same information to
each antenna sector by splitting the carrier's signal
output prior to amplification, thus requiring multiple
power amplifiers. |
| INT siteNumSectors | 1.3.6.1.4.1.8603.4.1.3.3 | INTEGER | read-write | This parameter is used to indicate the number of sectors in
the base station. Options are:
0 = omni
1 = one sector
2 = two sectors
3 = three sectors |
| siteConnectivity | 1.3.6.1.4.1.8603.4.1.4 | | | |
| STR siteCluster | 1.3.6.1.4.1.8603.4.1.4.1 | DisplayString | read-write | For EMS management purposes, the network may be divided into
clusters. This field identifies the cluster associated with the
basestation. |
| STR siteDomain | 1.3.6.1.4.1.8603.4.1.4.2 | DisplayString | read-write | The site domain is used with the siteId to form the hostname
of the basestation. |
| usrSectorInfo | 1.3.6.1.4.1.8603.4.2 | | | |
| sectorAntennaTable | 1.3.6.1.4.1.8603.4.2.1 | | not-accessible | |
| sectorAntennaEntry | 1.3.6.1.4.1.8603.4.2.1.1 | | not-accessible | |
| INT secAntIndex | 1.3.6.1.4.1.8603.4.2.1.1.1 | INTEGER | read-only | Sector index. |
| STR secAntName | 1.3.6.1.4.1.8603.4.2.1.1.2 | DisplayString | read-write | Sector name. For example, alpha, beta, gamme, omni. |
| STR secAntMorphology | 1.3.6.1.4.1.8603.4.2.1.1.3 | DisplayString | read-write | An indication of the RF classification for the coverage area
of the sector. Possible values include Rural, Dense Rural,
Light Suburban, Suburban, Dense Suburban, Light Urban, Urban,
and Dense Urban. |
| STR secAntManufacturer | 1.3.6.1.4.1.8603.4.2.1.1.4 | DisplayString | read-write | Name of the manufacturer of the antenna used in this sector. |
| STR secAntSharing | 1.3.6.1.4.1.8603.4.2.1.1.5 | DisplayString | read-write | Used to indicate and explain if the antenna is shared with
other basestations or other technologies. |
| T/F secAntRxDiv | 1.3.6.1.4.1.8603.4.2.1.1.6 | TruthValue | read-write | Indicates if two antennae are used in order to obtain
diversity. |
| T/F secAntSpatialDiv | 1.3.6.1.4.1.8603.4.2.1.1.7 | TruthValue | read-write | Indicates if antenna spatial diversity (two antennas physically
separated) is used. |
| T/F secAntPolarDiv | 1.3.6.1.4.1.8603.4.2.1.1.8 | TruthValue | read-write | Indicates if antenna polarization diversity is used. |
| STR secAntModel | 1.3.6.1.4.1.8603.4.2.1.1.9 | DisplayString | read-write | The model number of the antenna. |
| sectorAntennaCharTable | 1.3.6.1.4.1.8603.4.2.2 | | not-accessible | |
| sectorAntennaCharEntry | 1.3.6.1.4.1.8603.4.2.2.1 | | not-accessible | |
| INT secAntCharIndex | 1.3.6.1.4.1.8603.4.2.2.1.1 | INTEGER | read-only | Sector index. |
| STR secAntCharGain | 1.3.6.1.4.1.8603.4.2.2.1.2 | FloatAsString | read-write | The antenna gain in dBd (a measure of how well the antenna
will send or pick up a radio signal compared to a dipole
antenna). Valid values are 0 to 100. |
| STR secAntCharHorizontalBw | 1.3.6.1.4.1.8603.4.2.2.1.3 | FloatAsString | read-write | An indication of the RF aperture of the antenna based on the
1/2 power (3dB) point as measured off the main beam in the
horizontal plane. This value is used along with
sectorAntennaVerticalBw in propagation tools to mask the
path-loss and model coverage area. Valid values are 0 to 360. |
| STR secAntCharVertcalBw | 1.3.6.1.4.1.8603.4.2.2.1.4 | FloatAsString | read-write | An indication of the RF aperture of the antenna based on the
1/2 power (3dB) point as measured off the main beam in the
vertical plane. This value is used along with
sectorAntennaHorizontalBw in propagation tools to mask the
path-loss and model coverage area. Valid values are 0 to 180. |
| INT secAntCharRadOnCenter | 1.3.6.1.4.1.8603.4.2.2.1.5 | INTEGER | read-write | This is a measurement of the antenna center line mounting
height, in feet Above Ground Level (AGL). |
| INT secAntCharAzimuth | 1.3.6.1.4.1.8603.4.2.2.1.6 | INTEGER | read-write | This is a measure of the antenna main-beam orientation with
respect to true north in the horizontal plane. |
| INT secAntCharMechanicalTilt | 1.3.6.1.4.1.8603.4.2.2.1.7 | INTEGER | read-write | This is a measure of the physical mounting of the antenna with
respect to plumb (vertical). This value indicates values
relative to plumb which is assumed to be 0 degrees. Negative
values would indicate up-tilt, which is occasionally done to
adjust for excessive electrical tilt. |
| INT secAntCharElectricalTilt | 1.3.6.1.4.1.8603.4.2.2.1.8 | INTEGER | read-write | A measure of the down-tilt designed into the antenna pattern.
This is typically measured relative to a point at 90 degrees to
a plumb back plane in the main beam of the antenna. These values
may be fixed of variable for a given antenna model. |
| sectorLnaTable | 1.3.6.1.4.1.8603.4.2.3 | | not-accessible | |
| sectorLnaEntry | 1.3.6.1.4.1.8603.4.2.3.1 | | not-accessible | |
| INT secLnaIndex | 1.3.6.1.4.1.8603.4.2.3.1.1 | INTEGER | read-only | Sector index. |
| STR secLnaFilterType | 1.3.6.1.4.1.8603.4.2.3.1.2 | DisplayString | read-write | This parameter indicated the type of filter used in the
LNA/Duplexer unit. It can be simplex (receive only, or duplex
for transmit and receive). |
| T/F secLnaTowerTop | 1.3.6.1.4.1.8603.4.2.3.1.3 | TruthValue | read-write | Indicates if the LNA is a tower-top mounted type. |
