DVB-RCS-MIB

All MIBs › DVB-RCS-MIB

Organization: The SatLabs Group

Last Updated: 2010-02-16

Category: Satellite

Description: Defines managed objects for Digital Video Broadcasting Return Channel via Satellite (DVB-RCS) systems, characterizing satellite terminal network entities.

IPNetwork Monitor uses several OIDs from this MIB in network discovery and polling the applicable devices. Start monitoring DVB-RCS-MIB with a free 30-day trial of IPNetwork Monitor.

What Is DVB-RCS-MIB?

DVB-RCS-MIB is a vendor-neutral ETSI/DVB standards MIB defining managed objects for Return Channel Satellite Terminals (RCSTs) that implement the DVB-RCS interactive satellite broadband standard (ETSI EN 301 790). It exposes system-level configuration and identity data for the terminal's outdoor unit (antenna, transmit/receive characteristics, local oscillator), profile/feature declarations against the SatLabs interoperability profiles, and location information, alongside a broader object tree for RCST-specific operational data. Its monitoring value lies in characterizing both the satellite terminal's hardware configuration and its ongoing behavior: antenna size and gain, SSPA (transmit amplifier) presence, transmit/receive type and band, and receive local-oscillator frequency together let an operator confirm the terminal's RF hardware is correctly configured and operating within the satellite network's parameters. The module explicitly builds on the DVB-RCS/ETSI EN 301 790 standard and references SatLabs interoperability profile declarations as a related specification. It is deployed on VSAT-style satellite terminals (RCSTs) at remote sites using DVB-RCS interactive satellite broadband, managed from a central satellite network operations center. Engineers implementing or auditing this functionality typically reference the DVB-RCS-MIB RFC/standard documentation for the authoritative specification.

IPNetwork Monitor allows you to monitor SNMP objects defined in DVB-RCS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

vendor-neutral, standards-based MIB (ETSI DVB-RCS)
applies to Return Channel Satellite Terminals (RCSTs) / VSAT satellite modems

Monitoring Examples

An operator would poll dvbRcsSystemOduAntennaSize, dvbRcsSystemOduAntennaGain, and dvbRcsSystemOduSspa to confirm the terminal's outdoor unit hardware matches the expected installation, and check dvbRcsSystemOduTxType/dvbRcsSystemOduRxType along with dvbRcsSystemOduRxBand and dvbRcsSystemOduRxLO to verify RF configuration. dvbRcsSystemLocation and the dvbRcsSystemSatLabsProfilesDeclaration/OptionsDeclaration/FeaturesDeclaration objects help confirm the terminal is correctly geolocated and declaring the interoperability profile it supports. A mismatch in ODU RX local oscillator or an unexpected SatLabs profile declaration would point to a misconfigured or incompatible terminal at a remote site.

What Can Be Monitored

outdoor unit (ODU) antenna size and gain
ODU transmit/receive type and band
ODU receive local oscillator frequency
terminal location
SatLabs profile/options/features declaration

Imported Objects

From DIFFSERV-DSCP-TC

Dscp
DscpOrAny

From INET-ADDRESS-MIB

InetAddress
InetAddressPrefixLength
InetAddressType
InetPortNumber

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32
transmission

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION

From URI-TC-MIB

Uri

OIDs

OID symbolic	OID numeric	Type	Access	Description
dvbRcsMib	1.3.6.1.2.1.10.239			DVB-RCS MIB subtree. This MIB module applies to equipment that is a Return Channel Satellite Terminal (RCST), defined in the Digital Video Broadcasting Return Channel via Satellite system (DVB-RCS) standard (ETSI EN 301 790 Digital Video Broadcasting (DVB); Interaction Channel for Satellite Distribution Systems, European Telecommunications Standards Institute (ETSI)). It defines a set of MIB objects to characterize the behavior and performance of network-layer entities implementing DVB-RCS. This MIB module is intended to be used by DVB-RCS equipment following the SatLabs System Recommendations, defined by the SatLabs Group and available at www.satlabs.org. Note that, if not stated otherwise in the object DESCRIPTION clause, all writable objects are persistent. Copyright (C) The IETF Trust (2010). This version of this MIB module is part of RFC 5728; see the RFC itself for full legal notices.
dvbRcsMibObjects	1.3.6.1.2.1.10.239.1
dvbRcsRcst	1.3.6.1.2.1.10.239.1.1
dvbRcsRcstSystem	1.3.6.1.2.1.10.239.1.1.1
STR dvbRcsSystemMibRevision	1.3.6.1.2.1.10.239.1.1.1.1	SnmpAdminString	read-only	This object allows the SNMP agent to report the implemented MIB module revision. The supported REVISION of this module is reported.
DVB dvbRcsSystemSatLabsProfilesDeclaration	1.3.6.1.2.1.10.239.1.1.1.2	DvbRcsSatLabsProfileMap	read-only	Indicates the SatLabs profiles supported, as defined in the SatLabs System Recommendations.
DVB dvbRcsSystemSatLabsOptionsDeclaration	1.3.6.1.2.1.10.239.1.1.1.3	DvbRcsSatLabsOptionMap	read-only	Indicates the SatLabs options supported, as defined in the SatLabs System Recommendations.
DVB dvbRcsSystemSatLabsFeaturesDeclaration	1.3.6.1.2.1.10.239.1.1.1.4	DvbRcsSatLabsFeatureMap	read-only	Indicates the optional compatibility features and minor options supported, as defined in the SatLabs System Recommendations.
STR dvbRcsSystemLocation	1.3.6.1.2.1.10.239.1.1.1.5	SnmpAdminString	read-write	Physical location of the ODU antenna expressed as longitude, latitude, and altitude. The string shall have 31 characters in the following format: ,,,,,M where x, y and z represents digits, a=N or S, b=E or W, Reading the digits from left to right: 'x' 7 latitude digits; x digits 1-2 contain the degrees, x digits 3-7 contain the minutes in decimal; 'y' 8 longitude digits; y digits 1-3 contain the degrees, y digits 4-8 contain the minutes in decimal; 'z' 5 altitude digits; meters above sea level in decimal; '.' is the decimal point; ',' is the field separator; 'M' is the indicator for altitude meters. This format is a modified subset of the NMEA 0183 (National Marine Electronics Association, Interface Standard) format for Global Positioning System Fix Data. This location and the satellite position are used to calculate the RCST-satellite path delay. Note: The system.sysLocation object of MIB-II provides physical location of the IDU unit.
U32 dvbRcsSystemOduAntennaSize	1.3.6.1.2.1.10.239.1.1.1.6	Unsigned32	read-write	Diameter of the antenna.
U32 dvbRcsSystemOduAntennaGain	1.3.6.1.2.1.10.239.1.1.1.7	Unsigned32	read-write	Antenna peak gain of the ODU.
U32 dvbRcsSystemOduSspa	1.3.6.1.2.1.10.239.1.1.1.8	Unsigned32	read-write	Power level of the Solid State Power Amplifier installed in the ODU.
STR dvbRcsSystemOduTxType	1.3.6.1.2.1.10.239.1.1.1.9	SnmpAdminString	read-write	Type of transmitter installed in the ODU.
STR dvbRcsSystemOduRxType	1.3.6.1.2.1.10.239.1.1.1.10	SnmpAdminString	read-write	Type of LNB installed in the ODU, with information such as vendor type, output type (single, twin, quad,...), etc.
INT dvbRcsSystemOduRxBand	1.3.6.1.2.1.10.239.1.1.1.11	INTEGER	read-write	LNB High Band / Low Band selector. High Band corresponds to the emission of an 18-26 kHz tone with 0.4-0.8 Vpp in the Rx IFL cable: (0) - High Band (1) - Low Band
U32 dvbRcsSystemOduRxLO	1.3.6.1.2.1.10.239.1.1.1.12	Unsigned32	read-write	Frequency of LNB Local Oscillator (in 100 Hz)
U32 dvbRcsSystemOduTxLO	1.3.6.1.2.1.10.239.1.1.1.13	Unsigned32	read-write	Frequency of Block Up-Converter Local Oscillator (in 100 Hz).
dvbRcsSystemIduPep	1.3.6.1.2.1.10.239.1.1.1.14
INT dvbRcsTcpPep	1.3.6.1.2.1.10.239.1.1.1.14.1	INTEGER	read-write	Status and control of embedded TCP PEP. 0 - disabled or not implemented 1 - enabled
INT dvbRcsHttpPep	1.3.6.1.2.1.10.239.1.1.1.14.2	INTEGER	read-write	Status and control of embedded HTTP PEP. 0 - disabled or not implemented 1 - enabled
dvbRcsOduTx	1.3.6.1.2.1.10.239.1.1.1.15
dvbRcsOduTxTypeTable	1.3.6.1.2.1.10.239.1.1.1.15.1		not-accessible	This table contains the identification of each well- known BUC type supported by the IDU and provides its associated index.
dvbRcsOduTxTypeEntry	1.3.6.1.2.1.10.239.1.1.1.15.1.1		not-accessible	An entry in the BUC type table.
U32 dvbRcsOduTxTypeIndex	1.3.6.1.2.1.10.239.1.1.1.15.1.1.1	Unsigned32	not-accessible	Index for the BUC type.
STR dvbRcsOduTxTypeDescription	1.3.6.1.2.1.10.239.1.1.1.15.1.1.2	SnmpAdminString	read-only	Text-based identification of a BUC type.
U32 dvbRcsOduTxType	1.3.6.1.2.1.10.239.1.1.1.15.2	Unsigned32	read-write	Index of the selected BUC type.
dvbRcsOduRx	1.3.6.1.2.1.10.239.1.1.1.16
dvbRcsOduRxTypeTable	1.3.6.1.2.1.10.239.1.1.1.16.1		not-accessible	This table contains the identification of each well- known LNB type supported by the IDU and provides its associated index.
dvbRcsOduRxTypeEntry	1.3.6.1.2.1.10.239.1.1.1.16.1.1		not-accessible	An entry in the LNB type table.
U32 dvbRcsOduRxTypeIndex	1.3.6.1.2.1.10.239.1.1.1.16.1.1.1	Unsigned32	not-accessible	Index for the LNB type.
STR dvbRcsOduRxTypeDescription	1.3.6.1.2.1.10.239.1.1.1.16.1.1.2	SnmpAdminString	read-only	Text-based identification of an LNB type.
U32 dvbRcsOduRxType	1.3.6.1.2.1.10.239.1.1.1.16.2	Unsigned32	read-write	Index of the selected LNB type.
dvbRcsOduAntenna	1.3.6.1.2.1.10.239.1.1.1.17
dvbRcsOduAntennaTypeTable	1.3.6.1.2.1.10.239.1.1.1.17.1		not-accessible	This table contains the identification of each well- known antenna type supported by the IDU and provides its associated index.
dvbRcsOduAntennaTypeEntry	1.3.6.1.2.1.10.239.1.1.1.17.1.1		not-accessible	An entry in the antenna type table.
U32 dvbRcsOduAntennaTypeIndex	1.3.6.1.2.1.10.239.1.1.1.17.1.1.1	Unsigned32	not-accessible	Index for the antenna type.
STR dvbRcsOduAntennaTypeDescription	1.3.6.1.2.1.10.239.1.1.1.17.1.1.2	SnmpAdminString	read-only	Text-based identification of an antenna type.
U32 dvbRcsOduAntennaType	1.3.6.1.2.1.10.239.1.1.1.17.2	Unsigned32	read-write	Index of the selected antenna type.
dvbRcsRcstNetwork	1.3.6.1.2.1.10.239.1.1.2
IPt dvbRcsNetworkOamInetAddressType	1.3.6.1.2.1.10.239.1.1.2.1	InetAddressType	read-write	The type of Internet address of dvbRcsNetworkOamInetAddress. If the terminal OAM Internet address is unassigned or unknown, then the value of this object is unknown(0).
IP dvbRcsNetworkOamInetAddress	1.3.6.1.2.1.10.239.1.1.2.2	InetAddress	read-write	OAM IP Address of the RCST. This object is used with both IP and interfaces MIB-II subgroups. It uniquely determines the interface through which OAM traffic passes. The OAM IP address may be statically or dynamically assigned. It is system dependent whether the OAM IP address and the Traffic IP address are the same address. If the terminal has no OAM Internet address assigned or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsNetworkOamInetAddressType object.
ADR dvbRcsNetworkOamInetAddressPrefixLength	1.3.6.1.2.1.10.239.1.1.2.3	InetAddressPrefixLength	read-write	Prefix length for the OAM IP Address. If this address prefix is unknown or does not apply, the value is zero.
INT dvbRcsNetworkOamInetAddressAssign	1.3.6.1.2.1.10.239.1.1.2.4	INTEGER	read-write	Identifies whether the OAM IP address is statically (1) or dynamically (2) assigned.
IPt dvbRcsNetworkLanInetAddressType	1.3.6.1.2.1.10.239.1.1.2.5	InetAddressType	read-write	The type of Internet address of dvbRcsNetworkLanInetAddress. If the terminal Internet address on the LAN interface is unassigned or unknown, then the value of this object is unknown(0).
IP dvbRcsNetworkLanInetAddress	1.3.6.1.2.1.10.239.1.1.2.6	InetAddress	read-write	IP address of the LAN interface of the terminal. If the terminal has no Internet address assigned on the LAN interface or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsNetworkLanInetAddressType object.
ADR dvbRcsNetworkLanInetAddressPrefixLength	1.3.6.1.2.1.10.239.1.1.2.7	InetAddressPrefixLength	read-write	Prefix length for the LAN IP Address of the terminal. If this address prefix is unknown or does not apply, the value is zero.
IPt dvbRcsNetworkAirInterfaceDefaultGatewayInetAddressType	1.3.6.1.2.1.10.239.1.1.2.8	InetAddressType	read-write	The type of Internet address of dvbRcsNetworkAirInterfaceDefaultGatewayInetAddress. If the default gateway Internet address is unassigned or unknown, then the value of this object is unknown(0).
IP dvbRcsNetworkAirInterfaceDefaultGatewayInetAddress	1.3.6.1.2.1.10.239.1.1.2.9	InetAddress	read-write	IP address of the default gateway for the air interface. If the terminal has no default gateway assigned on the air interface or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsNetworkAirInterfaceDefaultGatewayInetAddressType object.
ADR dvbRcsNetworkAirInterfaceDefaultGatewayInetAddressPrefixLength	1.3.6.1.2.1.10.239.1.1.2.10	InetAddressPrefixLength	read-write	Prefix length for the IP address of the default gateway for the air interface. If this address prefix is unknown or does not apply, the value is zero.
dvbRcsNetworkDnsServers	1.3.6.1.2.1.10.239.1.1.2.11
IPt dvbRcsPrimaryDnsServerInetAddressType	1.3.6.1.2.1.10.239.1.1.2.11.1	InetAddressType	read-write	The type of Internet address of dvbRcsPrimaryDnsServerInetAddress. If the primary DNS server Internet address is unassigned or unknown, then the value of this object is unknown(0).
IP dvbRcsPrimaryDnsServerInetAddress	1.3.6.1.2.1.10.239.1.1.2.11.2	InetAddress	read-write	IP address of the primary DNS server in the NCC. If the terminal has no primary DNS server assigned or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsPrimaryDnsServerInetAddressType object.
ADR dvbRcsPrimaryDnsServerInetAddressPrefixLength	1.3.6.1.2.1.10.239.1.1.2.11.3	InetAddressPrefixLength	read-write	Prefix length for the IP address of the primary DNS server in the NCC. If this address prefix is unknown or does not apply, the value is zero.
IPt dvbRcsSecondaryDnsServerInetAddressType	1.3.6.1.2.1.10.239.1.1.2.11.4	InetAddressType	read-write	The type of Internet address of dvbRcsSecondaryDnsServerInetAddress. If the secondary DNS server Internet address is unassigned or unknown, then the value of this object is unknown(0).
IP dvbRcsSecondaryDnsServerInetAddress	1.3.6.1.2.1.10.239.1.1.2.11.5	InetAddress	read-write	IP address of the secondary DNS server in the NCC. If the terminal has no secondary DNS server assigned or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsSecondaryDnsServerInetAddressType object.
ADR dvbRcsSecondaryDnsServerInetAddressPrefixLength	1.3.6.1.2.1.10.239.1.1.2.11.6	InetAddressPrefixLength	read-write	Prefix length for the IP address of the secondary DNS server in the NCC. If this address prefix is unknown or does not apply, the value is zero.
IPt dvbRcsNetworkNccMgtInetAddressType	1.3.6.1.2.1.10.239.1.1.2.12	InetAddressType	read-write	The type of Internet address of dvbRcsNetworkNccMgtInetAddress. If the management server Internet address is unassigned or unknown, then the value of this object is unknown(0).
IP dvbRcsNetworkNccMgtInetAddress	1.3.6.1.2.1.10.239.1.1.2.13	InetAddress	read-write	IP address of the management server in the NCC. If the terminal has no management server assigned or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsNetworkNccMgtInetAddressType object.
ADR dvbRcsNetworkNccMgtInetAddressPrefixLength	1.3.6.1.2.1.10.239.1.1.2.14	InetAddressPrefixLength	read-write	Prefix length for the IP address of the management server in the NCC. If this address prefix is unknown or does not apply, the value is zero.
URI dvbRcsNetworkConfigFileDownloadUrl	1.3.6.1.2.1.10.239.1.1.2.15	Uri	read-write	Full path name for the configuration file download. It includes the protocol type (TFTP or FTP) and the associated server IP address or hostname. Hostname can only be used if DNS is supported by the RCST. The format of this parameter follows RFC 3986.
URI dvbRcsNetworkInstallLogFileDownloadUrl	1.3.6.1.2.1.10.239.1.1.2.16	Uri	read-write	Full path of the installation log file to download. It includes the protocol type (TFTP or FTP) and the associated server IP address or hostname. Hostname can only be used if DNS is supported by the RCST. The installation log file can be created on the installer's computer and downloaded to the RCST. The format of this parameter follows RFC 3986.
URI dvbRcsNetworkConfigFileUploadUrl	1.3.6.1.2.1.10.239.1.1.2.17	Uri	read-write	Full path name for the configuration file upload. It includes the protocol type (TFTP or FTP) and the associated server IP address or hostname. Hostname can only be used if DNS is supported by the RCST. The format of this parameter follows RFC 3986.
URI dvbRcsNetworkLogFileUploadUrl	1.3.6.1.2.1.10.239.1.1.2.18	Uri	read-write	Full path of the event log file. It includes the protocol type (TFTP or FTP) and the associated server IP address or hostname. Hostname can only be used if DNS is supported by the RCST. The format of this parameter follows RFC 3986.
URI dvbRcsNetworkInstallLogFileUploadUrl	1.3.6.1.2.1.10.239.1.1.2.19	Uri	read-write	Full path of the installation log file. It includes the protocol type (TFTP or FTP) and the associated server IP address or hostname. Hostname can only be used if DNS is supported by the RCST. The installation log file can be retrieved from the RCST by the NCC or by the installer via the LAN. The format of this parameter follows RFC 3986.
dvbRcsRcstInstall	1.3.6.1.2.1.10.239.1.1.3
INT dvbRcsInstallAntennaAlignmentState	1.3.6.1.2.1.10.239.1.1.3.1	INTEGER	read-write	Indicates the alignment state of the antenna: (1)-Start; (2)-Deny; (3)-Continue; (4)-Stop; (5)-Success; (6)-Fail
U32 dvbRcsInstallCwFrequency	1.3.6.1.2.1.10.239.1.1.3.2	Unsigned32	read-write	Frequency of the transmitted Continuous Wave carrier (in 100 Hz). Minimum required precision is 1 kHz.
U32 dvbRcsInstallCwMaxDuration	1.3.6.1.2.1.10.239.1.1.3.3	Unsigned32	read-write	Time after which the Continuous Wave carrier must be put down (in seconds).
I32 dvbRcsInstallCwPower	1.3.6.1.2.1.10.239.1.1.3.4	Integer32	read-write	IDU TX output level when the IDU is configured to send CW. The resolution is 0.1 dBm and the accuracy is +/- 1 dBm. Reconfiguration is applied immediately to a CW.
U32 dvbRcsInstallCoPolReading	1.3.6.1.2.1.10.239.1.1.3.5	Unsigned32	read-write	Co-polarization measured value during installation procedure (in 0.1 dB).
U32 dvbRcsInstallXPolReading	1.3.6.1.2.1.10.239.1.1.3.6	Unsigned32	read-write	Cross-polarization measured value during installation procedure (in 0.1 dB).
U32 dvbRcsInstallCoPolTarget	1.3.6.1.2.1.10.239.1.1.3.7	Unsigned32	read-write	Co-polarization target value during installation procedure (in 0.1 dB).
U32 dvbRcsInstallXPolTarget	1.3.6.1.2.1.10.239.1.1.3.8	Unsigned32	read-write	Cross-polarization target value during installation procedure (in 0.1 dB).
U32 dvbRcsInstallStandByDuration	1.3.6.1.2.1.10.239.1.1.3.9	Unsigned32	read-write	Time to wait in stand-by mode (in seconds).
U32 dvbRcsInstallTargetEsN0	1.3.6.1.2.1.10.239.1.1.3.10	Unsigned32	read-write	This value describes the wanted Es/N0 value that enables operation of the return link with the required error performance. The values shall be given in tenth of dB and the initial value shall be equal to 7 dB. The range shall be from 0 dB to 31.5 dB, with a precision of 0.1 dB.
dvbRcsRcstQos	1.3.6.1.2.1.10.239.1.1.4
dvbRcsPktClassTable	1.3.6.1.2.1.10.239.1.1.4.1		not-accessible	This table describes the packet classification used in the DVB-RCS terminal. The number of entries is specified by dvbRcsPktClassIndex.
dvbRcsPktClassEntry	1.3.6.1.2.1.10.239.1.1.4.1.1		not-accessible	An entry in the packet classification table. One object type of each entry may have a value in the active range (a non-default value). The other object types are then assumed to be set to 'inactive'. The entry with the lowest index value takes precedence when classifying a packet.
U32 dvbRcsPktClassIndex	1.3.6.1.2.1.10.239.1.1.4.1.1.1	Unsigned32	not-accessible	Index automatically incremented by one at row creation.
DSC dvbRcsPktClassDscpLow	1.3.6.1.2.1.10.239.1.1.4.1.1.2	Dscp	read-create	This object specifies the low value of a range of Diffserv Code Point (DSCP) values to which a packet is compared.
DSC dvbRcsPktClassDscpHigh	1.3.6.1.2.1.10.239.1.1.4.1.1.3	Dscp	read-create	This object specifies the high value of a range of Diffserv Code Point (DSCP) values to which a packet is compared.
DSC dvbRcsPktClassDscpMarkValue	1.3.6.1.2.1.10.239.1.1.4.1.1.4	DscpOrAny	read-create	This object is the Diffserv Code Point (DSCP) value used to mark the packet; -1 indicates no DSCP marking. Possible DSCP marks values are (0..63)
U32 dvbRcsPktClassIpProtocol	1.3.6.1.2.1.10.239.1.1.4.1.1.5	Unsigned32	read-create	This object specifies the IP protocol to which a packet is compared. A value of 255 means match all.
IPt dvbRcsPktClassSrcInetAddressType	1.3.6.1.2.1.10.239.1.1.4.1.1.6	InetAddressType	read-create	The type of Internet address of dvbRcsPktClassSrcInetAddress. If the packet class source Internet address is unassigned or unknown, then the value of this object is unknown(0).
IP dvbRcsPktClassSrcInetAddress	1.3.6.1.2.1.10.239.1.1.4.1.1.7	InetAddress	read-create	This object specifies the IP source address to which a packet is compared. If the packet class has no source Internet address assigned or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsPktClassSrcInetAddressType object.
ADR dvbRcsPktClassSrcInetAddressPrefixLength	1.3.6.1.2.1.10.239.1.1.4.1.1.8	InetAddressPrefixLength	read-create	Prefix length of the IP source address that will be matched for this packet class. A value of zero indicates that the selectivity is inactive.
IPt dvbRcsPktClassDstInetAddressType	1.3.6.1.2.1.10.239.1.1.4.1.1.9	InetAddressType	read-create	The type of Internet address of dvbRcsPktClassDstInetAddress. If the packet class destination Internet address is unassigned or unknown, then the value of this object is unknown(0).
IP dvbRcsPktClassDstInetAddress	1.3.6.1.2.1.10.239.1.1.4.1.1.10	InetAddress	read-create	This object specifies the IP destination address to which a packet is compared. If the packet class has no destination Internet address assigned or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsPktClassDstInetAddressType object.
ADR dvbRcsPktClassDstInetAddressPrefixLength	1.3.6.1.2.1.10.239.1.1.4.1.1.11	InetAddressPrefixLength	read-create	Prefix length of the IP source address that will be matched for this packet class. A value of zero indicates that the selectivity is inactive.
INE dvbRcsPktClassSrcPortLow	1.3.6.1.2.1.10.239.1.1.4.1.1.12	InetPortNumber	read-create	This object specifies the low range of the source port to which a packet is compared. A value of 0 indicates that the selectivity is inactive.
INE dvbRcsPktClassSrcPortHigh	1.3.6.1.2.1.10.239.1.1.4.1.1.13	InetPortNumber	read-create	This object specifies the high range of the source port to which a packet is compared. A value of 0 indicates that the selectivity is inactive.
INE dvbRcsPktClassDstPortLow	1.3.6.1.2.1.10.239.1.1.4.1.1.14	InetPortNumber	read-create	This object specifies the low range of the destination port to which a packet is compared. A value of 0 indicates that the selectivity is inactive.
INE dvbRcsPktClassDstPortHigh	1.3.6.1.2.1.10.239.1.1.4.1.1.15	InetPortNumber	read-create	This object specifies the high range of the destination port to which a packet is compared. A value of 0 indicates that the selectivity is inactive.
I32 dvbRcsPktClassVlanUserPri	1.3.6.1.2.1.10.239.1.1.4.1.1.16	Integer32	read-create	This object specifies the VLAN User Priority to which a packet is compared. A value of -1 indicates that the selectivity is inactive.
U32 dvbRcsPktClassPhbAssociation	1.3.6.1.2.1.10.239.1.1.4.1.1.17	Unsigned32	read-create	Associate the filter entry to a specific PHB (refer to dvbRcsPhbIdentifier).
ROW dvbRcsPktClassRowStatus	1.3.6.1.2.1.10.239.1.1.4.1.1.18	RowStatus	read-create	The status of this conceptual row. All writable objects in this row may be modified at any time.
dvbRcsPhbMappingTable	1.3.6.1.2.1.10.239.1.1.4.2		not-accessible	This table is a list of Per-Hop Behavior (PHB) MIB entries. It describes the PHB mapping to the Request Class.
dvbRcsPhbMappingEntry	1.3.6.1.2.1.10.239.1.1.4.2.1		not-accessible	An entry in the PHB mapping table.
U32 dvbRcsPhbIdentifier	1.3.6.1.2.1.10.239.1.1.4.2.1.1	Unsigned32	not-accessible	Identification of the Per-Hop Behavior (PHB). It follows the unsigned 16-bit binary encoding as specified in RFC 3140. The value 0 designates the Default PHB.
STR dvbRcsPhbName	1.3.6.1.2.1.10.239.1.1.4.2.1.2	SnmpAdminString	read-create	The name of the Per-Hop Behavior (PHB).
U32 dvbRcsPhbRequestClassAssociation	1.3.6.1.2.1.10.239.1.1.4.2.1.3	Unsigned32	read-create	This object is an association of this Per-Hop Behavior (PHB) to a Request Class (by reference to a Request Class index).
ROW dvbRcsPhbMappingRowStatus	1.3.6.1.2.1.10.239.1.1.4.2.1.4	RowStatus	read-create	The status of this conceptual row. All writable objects in this row may be modified at any time.
dvbRcsRequestClassTable	1.3.6.1.2.1.10.239.1.1.4.3		not-accessible	This table is a list of Request Class entries. This class describes the layer 2 QoS objects.
dvbRcsRequestClassEntry	1.3.6.1.2.1.10.239.1.1.4.3.1		not-accessible	An entry in the Request Class table.
U32 dvbRcsRequestClassIndex	1.3.6.1.2.1.10.239.1.1.4.3.1.1	Unsigned32	not-accessible	Index of the Request Class table. A total of 16 entries are supported.
STR dvbRcsRequestClassName	1.3.6.1.2.1.10.239.1.1.4.3.1.2	SnmpAdminString	read-create	Name of the Request Class.
U32 dvbRcsRequestClassChanId	1.3.6.1.2.1.10.239.1.1.4.3.1.3	Unsigned32	read-create	Channel ID of the Request Class.
U32 dvbRcsRequestClassVccVpi	1.3.6.1.2.1.10.239.1.1.4.3.1.4	Unsigned32	read-create	Defines the VPI used for the Request Class (ATM profile).
U32 dvbRcsRequestClassVccVci	1.3.6.1.2.1.10.239.1.1.4.3.1.5	Unsigned32	read-create	Defines the VCI used for the Request Class (ATM profile).
U32 dvbRcsRequestClassPidPoolReference	1.3.6.1.2.1.10.239.1.1.4.3.1.6	Unsigned32	read-create	Reference to the Packet IDentifier (PID) pool applicable for the Request Class.
U32 dvbRcsRequestClassCra	1.3.6.1.2.1.10.239.1.1.4.3.1.7	Unsigned32	read-create	Defines the Continuous Rate Assignment (CRA) level for the Request Class in bits per second (bit/s).
U32 dvbRcsRequestClassRbdcMax	1.3.6.1.2.1.10.239.1.1.4.3.1.8	Unsigned32	read-create	Maximum Rate-Based Dynamic Capacity (RBDC) that can be requested for the Request Class, in number of 2 kbit/s.
U32 dvbRcsRequestClassRbdcTimeout	1.3.6.1.2.1.10.239.1.1.4.3.1.9	Unsigned32	read-create	Persistence of the Rate-Based Dynamic Capacity (RBDC) request, expressed in superframes.
U32 dvbRcsRequestClassVbdcMax	1.3.6.1.2.1.10.239.1.1.4.3.1.10	Unsigned32	read-create	Maximum Volume-Based Dynamic Capacity (VBDC) that can be allocated to the Request Class, in payload units (one ATM cell or one MPEG packet) per superframe.
U32 dvbRcsRequestClassVbdcTimeout	1.3.6.1.2.1.10.239.1.1.4.3.1.11	Unsigned32	read-create	Time after which the RCST considers that the pending requests are lost. The RCST may issue new requests for that traffic. Volume-Based Dynamic Capacity (VBDC) Timeout is expressed in superframes.
U32 dvbRcsRequestClassVbdcMaxBackLog	1.3.6.1.2.1.10.239.1.1.4.3.1.12	Unsigned32	read-create	Volume-Based Dynamic Capacity (VBDC) back log per Request Class (expressed in bytes).
ROW dvbRcsRequestClassRowStatus	1.3.6.1.2.1.10.239.1.1.4.3.1.13	RowStatus	read-create	The status of this conceptual row. It is not possible to change values in a row of this table while the row is active.
dvbRcsPidPoolTable	1.3.6.1.2.1.10.239.1.1.4.4		not-accessible	This table contains the Packet IDentifier (PID) pools. For the MPEG profile, several Request Classes may be mapped within a pool of several PIDs to allow Section Packing across several Request Classes. A PID value may occur in more than one PID pool. Each PID value can effectively occur only once in each pool.
dvbRcsPidPoolEntry	1.3.6.1.2.1.10.239.1.1.4.4.1		not-accessible	An entry in the PID pool table.
U32 dvbRcsPidPoolIndex	1.3.6.1.2.1.10.239.1.1.4.4.1.1	Unsigned32	not-accessible	Index of the PID pool in the PID pool table.
U32 dvbRcsPidIndex	1.3.6.1.2.1.10.239.1.1.4.4.1.2	Unsigned32	not-accessible	Index of the PID entry within the PID pool.
U32 dvbRcsPidValue	1.3.6.1.2.1.10.239.1.1.4.4.1.3	Unsigned32	read-create	Defines one of the PIDs to be used in a PID pool of dvbRcsPidPoolIndex. A PID value may occur in more than one PID pool. Each PID value can effectively occur only once in each pool.
ROW dvbRcsPidPoolRowStatus	1.3.6.1.2.1.10.239.1.1.4.4.1.4	RowStatus	read-create	The status of this conceptual row. All writable objects in this row may be modified at any time.
U32 dvbRcsQosGlobalRbdcMax	1.3.6.1.2.1.10.239.1.1.4.5	Unsigned32	read-write	Global maximum RBDC that can be requested for the RCST, in number of 2 kbit/s.
U32 dvbRcsQosGlobalVbdcMax	1.3.6.1.2.1.10.239.1.1.4.6	Unsigned32	read-write	Global maximum VBDC that can be allocated to the RCST, in payload units (one ATM cell or one MPEG packet) per superframe.
U32 dvbRcsQosGlobalVbdcMaxBackLog	1.3.6.1.2.1.10.239.1.1.4.7	Unsigned32	read-write	Global VBDC back log at the RCST level (expressed in bytes). It is used only if the VBDC back log is not configured in the Request Class (expressed in bytes).
INT dvbRcsQosChannelIdStrictDispatching	1.3.6.1.2.1.10.239.1.1.4.8	INTEGER	read-write	Indicates whether the RCST will strictly follow RC association when signaled through Channel_ID in the TBTP: (0)- no strict association (1)- strict association
dvbRcsRcstControl	1.3.6.1.2.1.10.239.1.1.5
INT dvbRcsCtrlRebootCommand	1.3.6.1.2.1.10.239.1.1.5.1	INTEGER	read-write	This variable shall force the RCST to reboot: (1)- idle (2)- normal reboot (from current software load) (3)- reboot from alternate load (swap to alternate load before reboot)
INT dvbRcsCtrlRcstTxDisable	1.3.6.1.2.1.10.239.1.1.5.2	INTEGER	read-write	This variable shall force the RCST to stop transmission (transmit disabled as defined in SatLabs System Recommendations): (1)- idle (2)- initiate Tx Disabled
INT dvbRcsCtrlUserTrafficDisable	1.3.6.1.2.1.10.239.1.1.5.3	INTEGER	read-write	This variable shall disable user traffic (only RCST management traffic can be transmitted): (1)- idle (2)- disable user traffic
INT dvbRcsCtrlCwEnable	1.3.6.1.2.1.10.239.1.1.5.4	INTEGER	read-write	This variable will force the RCST to start transmission of CW, if the RCST is first set to the installation state and is properly configured for CW transmission: (1)- off (2)- on
INT dvbRcsCtrlOduTxReferenceEnable	1.3.6.1.2.1.10.239.1.1.5.5	INTEGER	read-write	Enables activation and deactivation of the 10 MHz reference clock in the Tx IFL cable: (1) off (2) on
INT dvbRcsCtrlOduTxDCEnable	1.3.6.1.2.1.10.239.1.1.5.6	INTEGER	read-write	Enables activation and deactivation of DC in the Tx IFL cable: (1) off (2) on
INT dvbRcsCtrlOduRxDCEnable	1.3.6.1.2.1.10.239.1.1.5.7	INTEGER	read-write	Enables activation and deactivation of DC in the Rx IFL cable: (1) off (2) on
INT dvbRcsCtrlDownloadFileCommand	1.3.6.1.2.1.10.239.1.1.5.8	INTEGER	read-write	This variable will initiate an RCST configuration file download process: (1) idle (2) download RCST configuration file from TFTP/FTP server (3) download RCST installation log file from TFTP/FTP server (INSTALL_LOG feature)
INT dvbRcsCtrlUploadFileCommand	1.3.6.1.2.1.10.239.1.1.5.9	INTEGER	read-write	This variable will initiate an RCST upload process: (1) idle (2) upload RCST configuration file to TFTP/FTP server (3) upload RCST event/alarm log file to TFTP/FTP server (4) upload RCST installation log file to TFTP/FTP server (INSTALL_LOG feature)
INT dvbRcsCtrlActivateConfigFileCommand	1.3.6.1.2.1.10.239.1.1.5.10	INTEGER	read-write	Triggers the RCST to use the configuration file and update its parameters accordingly. Some RCST implementations may require a reboot for the parameters to take effect (vendor specific). (1) idle (2) activate
INT dvbRcsCtrlRcstLogonCommand	1.3.6.1.2.1.10.239.1.1.5.11	INTEGER	read-write	This variable will initiate an RCST logon: (1) idle (2) initiate RCST logon
INT dvbRcsCtrlRcstLogoffCommand	1.3.6.1.2.1.10.239.1.1.5.12	INTEGER	read-write	This variable will initiate an RCST logoff: (1) idle (2) initiate RCST logoff
INT dvbRcsCtrlRcstRxReacquire	1.3.6.1.2.1.10.239.1.1.5.13	INTEGER	read-write	This variable will force the RCST to acquire the forward link and start receiving: (1) idle (2) reacquire forward link
dvbRcsRcstState	1.3.6.1.2.1.10.239.1.1.6
INT dvbRcsRcstMode	1.3.6.1.2.1.10.239.1.1.6.1	INTEGER	read-write	Identifies the current mode of the RCST and allows the RCST to return to the installation mode when needed. Values for the RCST mode are: Installation (0) Operational (1)
INT dvbRcsRcstFaultStatus	1.3.6.1.2.1.10.239.1.1.6.2	INTEGER	read-only	Provides the fault status of the terminal. The fault status management is vendor specific. Values for the fault status are: no fault (0) fault (1)
INT dvbRcsRcstFwdLinkStatus	1.3.6.1.2.1.10.239.1.1.6.3	INTEGER	read-only	Provides the status of the RCST forward link. Values for the forward link status are: Not acquired (0) Acquired (1)
INT dvbRcsRcstRtnLinkStatus	1.3.6.1.2.1.10.239.1.1.6.4	INTEGER	read-only	Provides the status of the RCST return link. Values for the return link status are: Logged-off (0) Logged-on (1)
INT dvbRcsRcstLogUpdated	1.3.6.1.2.1.10.239.1.1.6.5	INTEGER	read-only	Indicates the existence of an updated event log file: No update (0) Event Log file updated (1) The RCST should remove the 'Event Log file updated' indication as the log file is fetched by the NCC.
STR dvbRcsRcstCurrentSoftwareVersion	1.3.6.1.2.1.10.239.1.1.6.6	SnmpAdminString	read-only	Current RCST software version.
STR dvbRcsRcstAlternateSoftwareVersion	1.3.6.1.2.1.10.239.1.1.6.7	SnmpAdminString	read-only	Alternate (backup/new) RCST software version.
STR dvbRcsRcstActivatedConfigFileVersion	1.3.6.1.2.1.10.239.1.1.6.8	SnmpAdminString	read-only	Version of the most recently activated configuration file. The version is vendor specific.
STR dvbRcsRcstDownloadedConfigFileVersion	1.3.6.1.2.1.10.239.1.1.6.9	SnmpAdminString	read-only	Version of the most recently downloaded configuration file. Version is vendor specific. If the value is different from dvbRcsRcstActivatedConfigFileVersion, it is pending for activation.
dvbRcsFwdLink	1.3.6.1.2.1.10.239.1.2
dvbRcsFwdConfig	1.3.6.1.2.1.10.239.1.2.1
dvbRcsFwdStartTable	1.3.6.1.2.1.10.239.1.2.1.1		not-accessible	Lists forward link attachment points (e.g., different for installation and operation). The table describes the forward link parameters used for the start-up stream with the NCC.
dvbRcsFwdStartEntry	1.3.6.1.2.1.10.239.1.2.1.1.1		not-accessible	An entry in the Forward Link Start Configuration table.
U32 dvbRcsFwdStartIndex	1.3.6.1.2.1.10.239.1.2.1.1.1.1	Unsigned32	not-accessible	Index of the Forward Link StartConfig table.
I32 dvbRcsFwdStartPopId	1.3.6.1.2.1.10.239.1.2.1.1.1.2	Integer32	read-create	Population identifier associated with the start-up forward link: -1: any (auto) 0-65535: specific StartPopId If 'any' is set, the RCST will assume membership of any announced population ID and will commence with logon in accordance with this assumption.
U32 dvbRcsFwdStartFrequency	1.3.6.1.2.1.10.239.1.2.1.1.1.3	Unsigned32	read-create	Frequency of the start transponder carrying a Network Information Table to which any RCST shall trigger to acquire forward link. Its value shall be given in multiples of 100 kHz.
INT dvbRcsFwdStartPolar	1.3.6.1.2.1.10.239.1.2.1.1.1.4	INTEGER	read-create	2-bit field giving the polarization of the start transponder carrying a Network Information Table to which any RCST shall trigger to acquire forward link: 00: linear and horizontal 01: linear and vertical 10: circular left 11: circular right
INT dvbRcsFwdStartFormat	1.3.6.1.2.1.10.239.1.2.1.1.1.5	INTEGER	read-create	Specifies the transmission format standard applied for the startup stream. The start transport stream carries a Network Information Table that the RCST uses for acquiring the forward link signaling. Supported values are: -1: unspecified (automatic format acquisition is assumed) 0: DVB-S (support of this value is mandatory if DVB-S support is claimed) 1: DVB-S2 with CCM (support of this value is mandatory if DVB-S2 CCM support is claimed) 2: DVB-S2 with VCM or ACM (support of this value is mandatory if DVB-S2 ACM support is claimed) This allows the RCST to discriminate between CCM and VCM/ACM when selecting the forward link. The support of automatic format selection is optional. One or several of the other format selections must be supported, according to the claimed SatLabs profile support.
INT dvbRcsFwdStartRolloff	1.3.6.1.2.1.10.239.1.2.1.1.1.6	INTEGER	read-create	Specifies the receive filter roll-off applied on the start transponder. The start transponder carries a Network Information Table that the RCST uses for acquiring the forward link signaling. Supported values are: 0: any (auto) 1: 0.20 2: 0.25 3: 0.35
U32 dvbRcsFwdStartSymbolRate	1.3.6.1.2.1.10.239.1.2.1.1.1.7	Unsigned32	read-create	Specifies the symbol rate on the start transponder carrying a Network Information Table to which any RCST shall trigger to acquire forward link. Its value shall be given in multiples of 100 symbols/s.
INT dvbRcsFwdStartInnerFec	1.3.6.1.2.1.10.239.1.2.1.1.1.8	INTEGER	read-create	Specifies the inner Forward Error Correction used on the start transponder carrying a Network Information Table to which any RCST shall trigger to acquire forward link. Supported values are: autoFec (-1), fecRate1/2 (0), fecRate2/3 (1), fecRate3/4 (2), fecRate5/6 (3), fecRate7/8 (4), fecRate8/9 (5), fecRate3/5 (6), fecRate4/5 (7), fecRate9/10 (8), fecRate2/5 (9), fecRate1/3 (10), fecRate1/4 (11), noInnerCode (12) The support of autoFec is optional.
ROW dvbRcsFwdStartRowStatus	1.3.6.1.2.1.10.239.1.2.1.1.1.9	RowStatus	read-create	The status of this conceptual row. It is not possible to change values in a row of this table while the row is active.
dvbRcsFwdStatus	1.3.6.1.2.1.10.239.1.2.2
U32 dvbRcsFwdStatusPopId	1.3.6.1.2.1.10.239.1.2.2.1	Unsigned32	read-only	Population identifier applied at log-on: 0-65535: specific StartPopId If the RCST was allowed to logon with any population, the RCST will report the base number of the announced population ID indicated by the RCS Map Table linkage descriptor used at logon.
dvbRcsFwdStatusTable	1.3.6.1.2.1.10.239.1.2.2.2		not-accessible	This table describes the current status of Forward Link interfaces.
dvbRcsFwdStatusEntry	1.3.6.1.2.1.10.239.1.2.2.2.1		not-accessible	An entry in the forward link status table. Each entry is associated with a physical interface. An RCST shall support at least one entry.
U32 dvbRcsFwdStatusIndex	1.3.6.1.2.1.10.239.1.2.2.2.1.1	Unsigned32	not-accessible	Index of the forward link status table.
U32 dvbRcsFwdStatusIfReference	1.3.6.1.2.1.10.239.1.2.2.2.1.2	Unsigned32	read-only	Cross reference to the interface table.
U32 dvbRcsFwdStatusNetId	1.3.6.1.2.1.10.239.1.2.2.2.1.3	Unsigned32	read-only	Interactive network identifier of the forward link (from the RCS Map Table).
STR dvbRcsFwdStatusNetName	1.3.6.1.2.1.10.239.1.2.2.2.1.4	SnmpAdminString	read-only	The name of the interactive network of the forward link (from the RCS Map Table).
INT dvbRcsFwdStatusFormat	1.3.6.1.2.1.10.239.1.2.2.2.1.5	INTEGER	read-only	Specifies the transmission format applied on the forward link. Supported values are (from RCS Map Table): 0: DVB-S 1: DVB-S2 using CCM 2: DVB-S2 using VCM or ACM 3: reserved
U32 dvbRcsFwdStatusFrequency	1.3.6.1.2.1.10.239.1.2.2.2.1.6	Unsigned32	read-only	An estimate of the frequency of the forward link. Its value shall be given in multiples of 100 kHz.
INT dvbRcsFwdStatusPolar	1.3.6.1.2.1.10.239.1.2.2.2.1.7	INTEGER	read-only	2-bit field giving the polarization of the forward link Supported values are (from RCS Map Table): 00: linear and horizontal 01: linear and vertical 10: circular left 11: circular right
INT dvbRcsFwdStatusInnerFec	1.3.6.1.2.1.10.239.1.2.2.2.1.8	INTEGER	read-only	Specifies the inner Forward Error Correction used on the forward link for transmission to the RCST. Supported values are: unknown (-1), fecRate1/2 (0), fecRate2/3 (1), fecRate3/4 (2), fecRate5/6 (3), fecRate7/8 (4), fecRate8/9 (5), fecRate3/5 (6), fecRate4/5 (7), fecRate9/10 (8), fecRate2/5 (9), fecRate1/3 (10), fecRate1/4 (11), noInnerCode (12) The RCST will report a value that has been used for transmission to the RCST within the most recent 60 seconds. If this is not relevant, the RCST will report 'unknown'.
U32 dvbRcsFwdStatusSymbolRate	1.3.6.1.2.1.10.239.1.2.2.2.1.9	Unsigned32	read-only	An estimate of the symbol rate of the forward link. Its value shall be given in multiples of 100 symbols/s.
INT dvbRcsFwdStatusRolloff	1.3.6.1.2.1.10.239.1.2.2.2.1.10	INTEGER	read-only	An estimate of the roll-off applied on the forward link. Supported values are: 0: undefined 1: 0.20 2: 0.25 3: 0.35
INT dvbRcsFwdStatusModulation	1.3.6.1.2.1.10.239.1.2.2.2.1.11	INTEGER	read-only	Indicates the modulation on the forward link used for transmission to the RCST. Supported values are: 0: unknown 1: BPSK 2: QPSK 3: 8PSK 4: 16APSK 5: 32APSK The RCST will report a value that has been used for transmission to the RCST within the most recent 60 seconds. If this is not relevant, the RCST will report 'unknown'.
INT dvbRcsFwdStatusFecFrame	1.3.6.1.2.1.10.239.1.2.2.2.1.12	INTEGER	read-only	Indicates the frame length used on the forward link for transmission to the RCST. Supported values are: 0: Unknown 1: Short frame 2: Normal frame The RCST will report a value that has been used for transmission to the RCST within the most recent 60 seconds. If this is not relevant, the RCST will report 'unknown'.
INT dvbRcsFwdStatusPilot	1.3.6.1.2.1.10.239.1.2.2.2.1.13	INTEGER	read-only	Indicates whether pilots are used on the forward link for transmission to the RCST. Supported values are: 0: Unknown 1: Pilots are not used 2: Pilots are used The RCST will report a value that has been used for transmission to the RCST within the most recent 60 seconds. If this is not relevant, the RCST will report 'unknown'.
I32 dvbRcsFwdStatusBer	1.3.6.1.2.1.10.239.1.2.2.2.1.14	Integer32	read-only	Provides the RCST BER on the Forward Link in log10 units.
I32 dvbRcsFwdStatusCnr	1.3.6.1.2.1.10.239.1.2.2.2.1.15	Integer32	read-only	Provides the RCST CNR on the Forward Link in 0.1 dB units.
I32 dvbRcsFwdStatusRxPower	1.3.6.1.2.1.10.239.1.2.2.2.1.16	Integer32	read-only	Provides the power level of the forward link as received at the IDU, in 0.1 dBm units.
dvbRcsRtnLink	1.3.6.1.2.1.10.239.1.3
dvbRcsRtnConfig	1.3.6.1.2.1.10.239.1.3.1
I32 dvbRcsRtnConfigMaxEirp	1.3.6.1.2.1.10.239.1.3.1.1	Integer32	read-write	Max Equivalent Isotropic Radiated Power (EIRP) of the RCST, given in resolution of 0.1 dBm and applied when the IDU can, itself, set the necessary IDU TX output level, e.g., when using a BUC that has a power level detector and that provides sufficient feedback to the IDU.
I32 dvbRcsRtnConfigDefIfLevel	1.3.6.1.2.1.10.239.1.3.1.2	Integer32	read-write	IDU TX output level applied in case the dvbRcsRtnConfigMaxEirp cannot be used. The resolution is 0.1 dBm and the accuracy is +/- 1 dBm.
dvbRcsRtnStatus	1.3.6.1.2.1.10.239.1.3.2
I32 dvbRcsRtnStatusEbN0	1.3.6.1.2.1.10.239.1.3.2.1	Integer32	read-only	The EbN0 value reported for the return link, referenced to the regular SYNC burst transmission, in 0.1 dB units.
U32 dvbRcsRtnStatusSFDuration	1.3.6.1.2.1.10.239.1.3.2.2	Unsigned32	read-only	The duration of the currently applied return link superframe structure, in tenths of milliseconds.
INT dvbRcsRtnStatusPayloadUnit	1.3.6.1.2.1.10.239.1.3.2.3	INTEGER	read-only	Indicates if the payload unit used for the return link is ATM or MPEG.
dvbRcsConformance	1.3.6.1.2.1.10.239.2
dvbRcsRcstGroups	1.3.6.1.2.1.10.239.2.1
dvbRcsRcstSystemGroup	1.3.6.1.2.1.10.239.2.1.1			A collection of objects providing information applicable for basic device management support.
dvbRcsRcstNetworkGroup	1.3.6.1.2.1.10.239.2.1.2			A collection of objects providing basic networking management support.
dvbRcsRcstExtNetworkGroup	1.3.6.1.2.1.10.239.2.1.3			A collection of objects providing extended networking management support.
dvbRcsRcstDnsGroup	1.3.6.1.2.1.10.239.2.1.4			A collection of objects providing DNS management support.
dvbRcsRcstInstallGroup	1.3.6.1.2.1.10.239.2.1.5			A collection of objects providing information applicable for basic installation support.
dvbRcsRcstExtInstallGroup	1.3.6.1.2.1.10.239.2.1.6			A collection of objects providing extended device installation support.
dvbRcsRcstQosGroup	1.3.6.1.2.1.10.239.2.1.7			A collection of objects providing basic access to QoS configuration data.
dvbRcsRcstEnhancedClassifierGroup	1.3.6.1.2.1.10.239.2.1.8			A collection of objects providing support for management of the enhanced classifier.
dvbRcsRcstMpegQosGroup	1.3.6.1.2.1.10.239.2.1.9			A collection of objects providing access to MPEG-related link QoS configuration data.
dvbRcsRcstGlobalQosGroup	1.3.6.1.2.1.10.239.2.1.10			A collection of objects providing access to global RCST QoS configuration data.
dvbRcsRcstStrictQosGroup	1.3.6.1.2.1.10.239.2.1.11			A collection of objects allowing management of strict channel ID dispatching.
dvbRcsRcstControlGroup	1.3.6.1.2.1.10.239.2.1.12			A collection of objects allowing basic RCST control.
dvbRcsRcstExtControlGroup	1.3.6.1.2.1.10.239.2.1.13			A collection of objects allowing extended RCST control.
dvbRcsRcstStateGroup	1.3.6.1.2.1.10.239.2.1.14			A collection of objects allowing access to RCST state.
dvbRcsFwdConfigGroup	1.3.6.1.2.1.10.239.2.1.15			A collection of objects providing basic start forward link configuration support.
dvbRcsFwdStatusGroup	1.3.6.1.2.1.10.239.2.1.16			A collection of objects providing forward link status.
dvbRcsRtnConfigGroup	1.3.6.1.2.1.10.239.2.1.17			A collection of objects providing basic return link configuration support.
dvbRcsRtnExtConfigGroup	1.3.6.1.2.1.10.239.2.1.18			A collection of objects providing extended return link configuration support.
dvbRcsRtnStatusGroup	1.3.6.1.2.1.10.239.2.1.19			A collection of objects allowing access to return link status.
dvbRcsRtnExtStatusGroup	1.3.6.1.2.1.10.239.2.1.20			A collection of objects allowing access to extended return link status.
dvbRcsRcstOduListGroup	1.3.6.1.2.1.10.239.2.1.21			A collection of objects supporting flexible selection of ODU devices.
dvbRcsRcstCompliances	1.3.6.1.2.1.10.239.2.2
dvbRcsRcstCompliance1	1.3.6.1.2.1.10.239.2.2.1			The compliance statement for DVB-RCS terminals that are compliant with SatLabs System Recommendations. Compliance is linked to the support by the terminal of the options or features defined in the SatLabs System Recommendations. The supported options and features of a terminal are declared in objects dvbRcsSystemSatLabsOptionsDeclaration and dvbRcsSystemSatLabsFeaturesDeclaration respectively.

RFC description

Manages Return Channel Satellite Terminal (RCST) configurations and performance metrics for DVB-RCS satellite systems.

Start monitoring Return Channel Satellite Terminal / VSAT modem (vendor-neutral ETSI DVB-RCS standard) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DVB-RCS-MIB

What Is DVB-RCS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description