DVB-RCS-MIB :: dvbRcsSystemLocation

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DVB-RCS-MIB › dvbRcsSystemLocation

dvbRcsSystemLocation

Module: DVB-RCS-MIB

OID (symbolic): DVB-RCS-MIB::dvbRcsSystemLocation

OID (numeric): 1.3.6.1.2.1.10.239.1.1.1.5

Node type: OBJECT-TYPE

Type: SnmpAdminString

Access: read-write

Description: Physical location of the ODU antenna expressed as longitude, latitude, and altitude. The string shall have 31 characters in the following format: ,,,,,M where x, y and z represents digits, a=N or S, b=E or W, Reading the digits from left to right: 'x' 7 latitude digits; x digits 1-2 contain the degrees, x digits 3-7 contain the minutes in decimal; 'y' 8 longitude digits; y digits 1-3 contain the degrees, y digits 4-8 contain the minutes in decimal; 'z' 5 altitude digits; meters above sea level in decimal; '.' is the decimal point; ',' is the field separator; 'M' is the indicator for altitude meters. This format is a modified subset of the NMEA 0183 (National Marine Electronics Association, Interface Standard) format for Global Positioning System Fix Data. This location and the satellite position are used to calculate the RCST-satellite path delay. Note: The system.sysLocation object of MIB-II provides physical location of the IDU unit.

What is dvbRcsSystemLocation?

Holds the RCST antenna's physical position (latitude, longitude, altitude) in a fixed NMEA-0183-derived string format, e.g. "3723.500,N,12225.700,W,00010.0,M"; the terminal uses it to calculate the RCST-to-satellite signal path delay, and it is distinct from the generic sysLocation object in MIB-II which describes the indoor unit's location instead.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.239.1.1.1.5
snmpwalk -v2c -c public <target> DVB-RCS-MIB::dvbRcsSystemLocation

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.239.1.1.1.5.1
snmpget -v2c -c public <target> DVB-RCS-MIB::dvbRcsSystemLocation.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.2.1.10.239.1.1.1.5.1 s <value>

Start monitoring Return Channel Satellite Terminal / VSAT modem (vendor-neutral ETSI DVB-RCS standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DVB-RCS-MIB::dvbRcsSystemLocation OID value, configure state conditions and alerts, and monitor any Return Channel Satellite Terminal / VSAT modem (vendor-neutral ETSI DVB-RCS standard) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
Numeric OIDNameModule
1.3.6.1.2.1.10.239dvbRcsMibDVB-RCS-MIB
1.3.6.1.2.1.10.239.1dvbRcsMibObjectsDVB-RCS-MIB
1.3.6.1.2.1.10.239.1.1dvbRcsRcstDVB-RCS-MIB
1.3.6.1.2.1.10.239.1.1.1dvbRcsRcstSystemDVB-RCS-MIB
1.3.6.1.2.1.10.239.1.1.1.5dvbRcsSystemLocationDVB-RCS-MIB

Module

This MIB depends on