DLINKPRIME-VLAN-MIB

All MIBs › DLINKPRIME-VLAN-MIB

Organization: D-Link Corp.

Last Updated: 2014-04-26

Category: VLAN Management

Description: Manages IEEE 802.1Q VLAN creation, port membership, and tagging on D-Link Prime switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DLINKPRIME-VLAN-MIB?

This is a D-Link Prime-series proprietary MIB module for managing IEEE 802.1Q Virtual LAN (VLAN) configuration, including VLAN creation, naming, and port tagging membership. It defines a vendor-specific VLAN list textual convention (Dlink2kVlanList) used across its tables to represent large VLAN membership bitmaps efficiently, alongside the underlying VLAN and port-membership objects. Monitoring through this MIB is primarily configuration-state verification: administrators check VLAN membership tables to confirm ports are assigned to the correct VLANs and that tagging (trunk vs. access) is applied as designed, catching misconfigurations that cause traffic to land in the wrong broadcast domain or fail to reach intended destinations. It complements the standard IEEE 802.1Q Q-BRIDGE-MIB (dot1qVlan objects), implementing similar functionality as a D-Link-specific extension. It is deployed on D-Link Prime series switches across enterprise networks segmenting traffic by VLAN for security or broadcast-domain control. Engineers can download the DLINKPRIME-VLAN-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in DLINKPRIME-VLAN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

D-Link Prime series switches

Monitoring Examples

Because no leaf sample objects were provided beyond the Dlink2kVlanList textual convention, a typical monitoring approach would poll this MIB's VLAN membership tables, which use the Dlink2kVlanList bitmap format to represent all VLANs a given port belongs to, to confirm a port's tagged/untagged VLAN assignments match the intended network design. An admin troubleshooting a device unable to reach a resource on another VLAN would check whether the port's VLAN membership bitmap actually includes the expected VLAN ID.

What Can Be Monitored

VLAN creation and naming
port VLAN membership bitmap
tagged vs untagged port assignment

Imported Objects

From BRIDGE-MIB

dot1dBasePort

OBJECT-TYPE

From DLINK-ID-REC-MIB

dlinkPrimeCommon

OBJECT-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressPrefixLength
InetAddressType

From Q-BRIDGE-MIB

PortList
VlanId
VlanIdOrNone
dot1vProtocolPortGroupId	OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

MacAddress
RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
dlinkPrimeVlanMIB	1.3.6.1.4.1.171.28.26			This MIB module defines objects for extending the configuration of VLAN (Virtual Local Area Network).
dpVlanMIBNotifications	1.3.6.1.4.1.171.28.26.0
dpVlanMIBObjects	1.3.6.1.4.1.171.28.26.1
dpVlanPortIfCtrlTable	1.3.6.1.4.1.171.28.26.1.1		not-accessible	This table provides mechanism to configure port-specific VLAN function.
dpVlanPortIfCtrlEntry	1.3.6.1.4.1.171.28.26.1.1.1		not-accessible	A table entry represents the VLAN configuration on a port. This table is an extension to dot1qPortVlanTable which is defined at Q-BRIDGE-MIB.
INT dpVlanPortIfMode	1.3.6.1.4.1.171.28.26.1.1.1.1	INTEGER	read-write	This object indicates VLAN mode for the port. access - this port will be untagged member of the access VLAN configured for the port. hybrid - the port can be untagged or tagged member of all VLANs configured by the user. The purpose of this VLAN mode is to support protocol VLAN, MAC-based VLAN, voice VLAN and dot1q VLAN tunnel application in access side. trunk - this port is either tagged or untagged member port of its native VLAN and can be tagged member of other VLANs configured by the user. The purpose of a trunk port is to support the switch-to-switch connection. dot1qTunnel - the port behaves as an UNI port of a service VLAN. privateVlanHost - the port behaves as private VLAN host port. privateVlanPromiscuous - the port behaves as private VLAN promiscuous port. privateVlanTrunkPromiscuous - the port behaves as private VLAN trunk promiscuous port. privateVlanTrunkSecondary - the port behaves as private VLAN trunk secondary port. When VLAN mode is changed, the VLAN related setting associated with previous mode will be lost.
T/F dpVlanPortIfTrunkNativeVlanTagged	1.3.6.1.4.1.171.28.26.1.1.1.2	TruthValue	read-write	This object indicates whether enable the tagging mode of the native VLAN on the interface. Note: This value is meaningful only when the VLAN mode of the port is one of the 'trunk', 'privateVlanTrunkPromiscuous' or 'privateVlanTrunkSecondary'.
INT dpVlanPortIfAcceptableFrameTypes	1.3.6.1.4.1.171.28.26.1.1.1.3	INTEGER	read-write	This object indicates the acceptable frame types on the interface. 'admitAll' - Permits both tagged and untagged packet. 'admitUntaggedAndPriority' - Only untagged or Priority-Tagged packets received on this interface will be accepted and tagged packets are dropped. 'admitTagged' - Only tagged incoming packets are permitted and untagged packets are dropped.
DLI dpVlanPortIfTagAllowVlanLstFirst2K	1.3.6.1.4.1.171.28.26.1.1.1.4	Dlink2kVlanList	read-write	This object specifies the VLANs in a string of octets containing one bit per VLAN for VLANs 1 to 2048. If the bit is set to '1', then the interface is allowed to be the VLAN's tagged member. Note: This value is meaningful only when the VLAN mode of the port is one of the 'hybrid', 'trunk', 'privateVlanTrunkPromiscuous' or 'privateVlanTrunkSecondary'
DLI dpVlanPortIfTagAllowVlanLstSecond2K	1.3.6.1.4.1.171.28.26.1.1.1.5	Dlink2kVlanList	read-write	This object specifies the VLANs in a string of octets containing one bit per VLAN for VLANs 2049 to 4094. If the bit is set to '1', then the interface is allowed to be the VLAN's tagged member. Note: This value is meaningful only when the VLAN mode of the port is one of the 'hybrid', 'trunk', 'privateVlanTrunkPromiscuous' or 'privateVlanTrunkSecondary'
DLI dpVlanPortIfUntagAllowVlanLstFirst2K	1.3.6.1.4.1.171.28.26.1.1.1.6	Dlink2kVlanList	read-write	This object specifies the VLANs in a string of octets containing one bit per VLAN for VLANs 1 to 2048. If the bit is set to '1', then the interface is allowed to be the VLAN's untagged member. Note: This value is meaningful only when the VLAN mode of the port is 'hybrid' or 'dot1qTunnel'.
DLI dpVlanPortIfUntagAllowVlanLstSecond2K	1.3.6.1.4.1.171.28.26.1.1.1.7	Dlink2kVlanList	read-write	This object specifies the VLANs in a string of octets containing one bit per VLAN for VLANs 2049 to 4094. If the bit is set to '1', then the interface is allowed to be the VLAN's untagged member. Note: This value is meaningful only when the VLAN mode of the port is 'hybrid' or 'dot1qTunnel'.
T/F dpVlanAsymVlanStateEnabled	1.3.6.1.4.1.171.28.26.1.2	TruthValue	read-write	This object enables or disables asymmetric VLAN feature.
dpVlanManagementVlanGlobal	1.3.6.1.4.1.171.28.26.1.3
T/F dpVlanManagementVlanEnabled	1.3.6.1.4.1.171.28.26.1.3.1	TruthValue	read-write	This object enables or disables management VLAN feature.
VLA dpVlanManagementVlanId	1.3.6.1.4.1.171.28.26.1.3.2	VlanIdOrNone	read-write	The object specifies the management VLAN on a switch. A value of zero indicates that no management VLAN has been configured. It is required to configure the global dpVlanManagementVlanId and enable dpsvEnabled to start the management VLAN function.
dpVlanPortBasedVlan	1.3.6.1.4.1.171.28.26.1.4
T/F dpVlanPortBasedVlanEnabled	1.3.6.1.4.1.171.28.26.1.4.1	TruthValue	read-write	This object enables or disables Port-based VLAN feature.
dpPortBasedVlanTable	1.3.6.1.4.1.171.28.26.1.4.2		not-accessible	A table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and will be restored after the device is reset.
dpPortBasedVlanEntry	1.3.6.1.4.1.171.28.26.1.4.2.1		not-accessible	Static information for a Port-based VLAN configured into the device by (local or network) management.
I32 dpPortBasedVlanIndex	1.3.6.1.4.1.171.28.26.1.4.2.1.1	Integer32	read-create	Port-based VLAN index.
POR dpPortBasedVlanEgressPorts	1.3.6.1.4.1.171.28.26.1.4.2.1.2	PortList	read-create	The set of ports that are permanently assigned to the egress list for this VLAN by management.
ROW dpPortBasedVlanRowStatus	1.3.6.1.4.1.171.28.26.1.4.2.1.3	RowStatus	read-create	This object indicates the status of this entry.
dpVlanMIBConformance	1.3.6.1.4.1.171.28.26.2
dpVlanCompliances	1.3.6.1.4.1.171.28.26.2.1
dpVlanCompliance	1.3.6.1.4.1.171.28.26.2.1.1			The compliance statement for entities which implement the DLINKPRIME-VLAN-MIB.
dpVlanGroups	1.3.6.1.4.1.171.28.26.2.2
dpVlanIfCfgGroup	1.3.6.1.4.1.171.28.26.2.2.1			A collection of objects providing the information and control for configuring port-specific VLAN feature.
dpVlanAsymmetricVlanCfgGroup	1.3.6.1.4.1.171.28.26.2.2.2			A collection of objects provides the management of asymmetric VLAN feature.

RFC description

Vendor-private MIB for D-Link switches; manages VLAN configuration, membership, and VLAN-based network policies.

Start monitoring D-Link Prime series switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DLINKPRIME-VLAN-MIB

What Is DLINKPRIME-VLAN-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description