All MIBs › RADLAN-vlan-MIB
Organization: Radlan Computer Communications Ltd.
Last Updated: 2006-02-12
Category: VLAN Management, Vendor: RADLAN/Cisco SB
Description: Manages VLAN creation, port membership, and tagging configuration on Radlan/Marvell switches.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is RADLAN-vlan-MIB?
RADLAN-vlan-MIB is a private Marvell/Radlan switch MIB providing VLAN configuration and management, covering VLAN naming, per-port tagging mode, and special-purpose VLAN behavior such as voice VLAN and default VLAN handling. It exposes configuration data including VLAN name-to-ID mappings, maximum VLAN table sizing, per-port tagging state, and unknown-traffic flooding flags. While primarily configuration-oriented, its per-port VLAN mode and flooding-behavior fields provide operational-state visibility that helps confirm Layer 2 segmentation is behaving as intended and can reveal misconfigurations causing VLAN leakage or unwanted broadcast/unknown-unicast flooding. It builds on the standard IEEE 802.1Q VLAN model and typically coexists with the standard Q-BRIDGE-MIB (RFC 4363) alongside vendor VLAN extensions. It is deployed on virtually every managed Marvell/Radlan-based switch to configure Layer 2 network segmentation for security, broadcast-domain control, and traffic engineering. Network engineers evaluating or troubleshooting this functionality can download the RADLAN-vlan-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in RADLAN-vlan-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Marvell/Radlan-based managed switch
Monitoring Examples
vlanNameTable/Entry maps a vlanNameName to its vlanNameTag and associated vlanNameIfIndex, letting an admin confirm a given VLAN ID corresponds to the expected name and interface. vlanPortModeTable/Entry's vlanPortModeState shows each port's tagging mode; an admin diagnosing a misbehaving port would check whether it is in the expected access/trunk mode. vlanSendUnknownToAllPorts flags whether unknown-destination traffic is flooded broadly, and an unexpectedly enabled setting on a large VLAN could explain excessive broadcast-domain traffic, while vlanVoice identifies the VLAN designated for voice traffic.
What Can Be Monitored
- VLAN name-to-ID mapping
- per-port VLAN tagging mode
- unknown-traffic flooding behavior per VLAN
- voice VLAN designation
- default VLAN configuration
This MIB depends on
Related MIBs
Imported Objects
From BRIDGE-MIB
| dot1dBasePort | OBJECT-TYPE |
From IF-MIB
| ifIndex | OBJECT-TYPE |
From INET-ADDRESS-MIB
| InetAddressType |
From Q-BRIDGE-MIB
| PortList | |
| VlanIndex | |
| dot1qVlanIndex | OBJECT-TYPE |
From RADLAN-BRIDGEMIBOBJECTS-MIB
| VlanList1 | |
| VlanList2 | |
| VlanList3 | |
| VlanList4 |
From RADLAN-MIB
| rnd | OBJECT-IDENTITY |
From SNMP-FRAMEWORK-MIB
| SnmpAdminString |
From SNMPv2-SMI
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE |
From SNMPv2-TC
| DisplayString | |
| MacAddress | |
| RowStatus | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| vlan | 1.3.6.1.4.1.89.48 | The private MIB module definition for IP Multicast support in Radlan devices. | ||
| INT vlanMibVersion | 1.3.6.1.4.1.89.48.1 | INTEGER | read-only | MIB's version : Version 2: the current VLAN MIB replaced the previous one; Version 3: field vlanPortForbiddenEgressPort was added. Version 4: dot1q and dot1v supported Version 5: Private Edge Vlan vlanPrivateEdgeSupported vlanPrivateEdgeMibVersion vlanPrivateEdgeTable |
| INT vlanMaxTableNumber | 1.3.6.1.4.1.89.48.2 | INTEGER | read-only | Maximum number of VLAN Tables supported by the device. |
| vlanNameTable | 1.3.6.1.4.1.89.48.21 | not-accessible | This table translates Vlan name to Vlan's tag and ifindex | |
| vlanNameEntry | 1.3.6.1.4.1.89.48.21.1 | not-accessible | The row definition for this table. | |
| STR vlanNameName | 1.3.6.1.4.1.89.48.21.1.1 | DisplayString | read-only | The Vlan's name |
| INT vlanNameTag | 1.3.6.1.4.1.89.48.21.1.2 | INTEGER | read-only | The Vlan's tag |
| INT vlanNameIfIndex | 1.3.6.1.4.1.89.48.21.1.3 | INTEGER | read-only | The Vlan's ifindex |
| vlanPortModeTable | 1.3.6.1.4.1.89.48.22 | not-accessible | This table hold information on port status trunk or access | |
| vlanPortModeEntry | 1.3.6.1.4.1.89.48.22.1 | not-accessible | The row definition for this table. | |
| INT vlanPortModeState | 1.3.6.1.4.1.89.48.22.1.1 | INTEGER | read-write | The port state, 1 is generic cli |
| T/F vlanSendUnknownToAllPorts | 1.3.6.1.4.1.89.48.27 | TruthValue | read-write | If a value of the parameter is true a frame with unknown destination MAC address sent by the Layer 3 to a VLAN will be sent to all ports of the VLAN. If a value of the parameter is false a frame with unknown destination MAC address sent by the Layer 3 to a VLAN will be discarded. |
| T/F vlanDefaultSupported | 1.3.6.1.4.1.89.48.29 | TruthValue | read-only | supported or not default vlan. |
| T/F vlanDot1vSupported | 1.3.6.1.4.1.89.48.31 | TruthValue | read-only | 802.1v standard for vlan per port and protocol. |
| T/F vlanDefaultEnabled | 1.3.6.1.4.1.89.48.32 | TruthValue | read-write | if supported default vlan , indicate enabled or disabled |
| vlanSpecialTagTable | 1.3.6.1.4.1.89.48.33 | not-accessible | special vlan tag used for this port | |
| vlanSpecialTagEntry | 1.3.6.1.4.1.89.48.33.1 | not-accessible | entry of special tag | |
| VLA vlanSpecialTagVID | 1.3.6.1.4.1.89.48.33.1.1 | VlanIndex | read-write | specify the special vlan tag . |
| ROW vlanSpecialTagStatus | 1.3.6.1.4.1.89.48.33.1.2 | RowStatus | read-write | The row status variable, used according to row installation and removal conventions. |
| vlanSpecialTagCurrentTable | 1.3.6.1.4.1.89.48.34 | not-accessible | special Current vlan tag used for this port | |
| vlanSpecialTagCurrentEntry | 1.3.6.1.4.1.89.48.34.1 | not-accessible | entry of Current special tag | |
| VLA vlanSpecialTagCurrentVID | 1.3.6.1.4.1.89.48.34.1.1 | VlanIndex | read-only | specify the special vlan tag . |
| T/F vlanSpecialTagCurrentReserved | 1.3.6.1.4.1.89.48.34.1.2 | TruthValue | read-only | specify if the special vlan tag is reserved . |
| T/F vlanSpecialTagCurrentActive | 1.3.6.1.4.1.89.48.34.1.3 | TruthValue | read-only | specify if the special vlan tag is used . |
| T/F vlanPrivateEdgeSupported | 1.3.6.1.4.1.89.48.35 | TruthValue | read-only | is private edge supported. |
| INT vlanPrivateEdgeVersion | 1.3.6.1.4.1.89.48.36 | INTEGER | read-only | private edge version. |
| vlanPrivateEdgeTable | 1.3.6.1.4.1.89.48.37 | not-accessible | table for pve port and uplink | |
| vlanPrivateEdgeEntry | 1.3.6.1.4.1.89.48.37.1 | not-accessible | entry of pve | |
| INT vlanPrivateEdgeUplink | 1.3.6.1.4.1.89.48.37.1.1 | INTEGER | read-write | specify the uplink port. |
| ROW vlanPrivateEdgeStatus | 1.3.6.1.4.1.89.48.37.1.2 | RowStatus | read-write | The row status variable, used according to row installation and removal conventions. |
| T/F vlanDynamicVlanSupported | 1.3.6.1.4.1.89.48.38 | TruthValue | read-only | is DynamicVlanVlan supported. |
| vlanDynamicVlanTable | 1.3.6.1.4.1.89.48.39 | not-accessible | table for DynamicVlan | |
| vlanDynamicVlanEntry | 1.3.6.1.4.1.89.48.39.1 | not-accessible | entry of DynamicVlan | |
| MAC vlanDynamicVlanMacAddress | 1.3.6.1.4.1.89.48.39.1.1 | MacAddress | not-accessible | mac address |
| VLA vlanDynamicVlanTag | 1.3.6.1.4.1.89.48.39.1.2 | VlanIndex | read-write | vlan Tag |
| ROW vlanDynamicVlanStatus | 1.3.6.1.4.1.89.48.39.1.3 | RowStatus | read-write | The row status variable, used according to row installation and removal conventions. |
| vlanPortModeExtTable | 1.3.6.1.4.1.89.48.40 | not-accessible | This table hold information on port status trunk or access | |
| vlanPortModeExtEntry | 1.3.6.1.4.1.89.48.40.1 | not-accessible | The row definition for this table. | |
| INT vlanPortModeExtState | 1.3.6.1.4.1.89.48.40.1.1 | INTEGER | read-write | The ext |
| ROW vlanPortModeExtStatus | 1.3.6.1.4.1.89.48.40.1.2 | RowStatus | read-write | The row status variable, used according to row installation and removal conventions. |
| T/F vlanPrivateSupported | 1.3.6.1.4.1.89.48.41 | TruthValue | read-only | is private vlan supported. |
| vlanPrivateTableOld | 1.3.6.1.4.1.89.48.42 | not-accessible | table for PrivateVlan | |
| vlanPrivateEntryOld | 1.3.6.1.4.1.89.48.42.1 | not-accessible | entry of PrivateVlan | |
| INT vlanPrivateOldIsolatedVlanTag | 1.3.6.1.4.1.89.48.42.1.1 | INTEGER | read-write | vlan Tag |
| ROW vlanPrivateOldStatus | 1.3.6.1.4.1.89.48.42.1.2 | RowStatus | read-write | The row status variable, used according to row installation and removal conventions. |
| vlanPrivateCommunityTable | 1.3.6.1.4.1.89.48.43 | not-accessible | table for PrivateVlan | |
| vlanPrivateCommunityEntry | 1.3.6.1.4.1.89.48.43.1 | not-accessible | entry of PrivateVlan | |
| VLA vlanPrivateCommunityVlanTag | 1.3.6.1.4.1.89.48.43.1.1 | VlanIndex | not-accessible | vlan Tag |
| ROW vlanPrivateCommunityStatus | 1.3.6.1.4.1.89.48.43.1.2 | RowStatus | read-write | The row status variable, used according to row installation and removal conventions. |
| vlanMulticastTvTable | 1.3.6.1.4.1.89.48.44 | not-accessible | multicast vlan used for this port | |
| vlanMulticastTvEntry | 1.3.6.1.4.1.89.48.44.1 | not-accessible | entry of multicast tag | |
| VLA vlanMulticastTvVID | 1.3.6.1.4.1.89.48.44.1.1 | VlanIndex | read-write | specify the TV vlan tag, vlan must exist . |
| ROW vlanMulticastTvStatus | 1.3.6.1.4.1.89.48.44.1.2 | RowStatus | read-write | The row status variable, used according to row installation and removal conventions. |
| vlanMacBaseVlanGroupTable | 1.3.6.1.4.1.89.48.45 | not-accessible | A table that contains mappings from Range of MAC addresses to Group Identifiers used for MAC-based VLAN Classification. | |
| vlanMacBaseVlanGroupEntry | 1.3.6.1.4.1.89.48.45.1 | not-accessible | A mapping from a Range of MAC addresses to a Group Identifier. | |
| MAC vlanMacBaseVlanMacAddress | 1.3.6.1.4.1.89.48.45.1.1 | MacAddress | not-accessible | The base MAC address of the range. |
| INT vlanMacBaseVlanMacMask | 1.3.6.1.4.1.89.48.45.1.2 | INTEGER | not-accessible | The Mask of the range. The mask determains the leading '1' bits of the mask (MSB). 48 means single HOST and 9 means the widest range. The MASK is limited to 9 to avoid entring ranges including multicast addresses. |
| INT vlanMacBaseVlanGroupId | 1.3.6.1.4.1.89.48.45.1.3 | INTEGER | read-create | Represents a group of ranges of MAC addresses that are associated together when assigning a VID to a frame. |
| ROW vlanMacBaseVlanGroupRowStatus | 1.3.6.1.4.1.89.48.45.1.4 | RowStatus | read-create | This object indicates the status of this entry. |
| vlanMacBaseVlanPortTable | 1.3.6.1.4.1.89.48.46 | not-accessible | A table that contains VID sets used for MAC-based VLAN Classification. | |
| vlanMacBaseVlanPortEntry | 1.3.6.1.4.1.89.48.46.1 | not-accessible | A VID set for a port and group. | |
| INT vlanMacBaseVlanPortGroupId | 1.3.6.1.4.1.89.48.46.1.1 | INTEGER | not-accessible | Designates a group of Ranges in the ranges Group Database. |
| VLA vlanMacBaseVlanPortGroupVid | 1.3.6.1.4.1.89.48.46.1.2 | VlanIndex | read-create | The VID associated with a group of range MAC addresses for each port. |
| ROW vlanMacBaseVlanPortRowStatus | 1.3.6.1.4.1.89.48.46.1.3 | RowStatus | read-create | This object indicates the status of this entry. |
| vlanPrivateEdgeGroupTable | 1.3.6.1.4.1.89.48.47 | not-accessible | table for pve port and uplink | |
| vlanPrivateEdgeGroupEntry | 1.3.6.1.4.1.89.48.47.1 | not-accessible | entry of pve | |
| INT vlanPrivateEdgeGroupSource | 1.3.6.1.4.1.89.48.47.1.1 | INTEGER | read-only | specify the uplink group. |
| INT vlanPrivateEdgeGroupUplink | 1.3.6.1.4.1.89.48.47.1.2 | INTEGER | read-write | specify the uplink port. |
| ROW vlanPrivateEdgeGroupStatus | 1.3.6.1.4.1.89.48.47.1.3 | RowStatus | read-write | The row status variable, used according to row installation and removal conventions. |
| vlanPrivateEdgeGroupIfIndexTable | 1.3.6.1.4.1.89.48.48 | not-accessible | table for pve port and uplink | |
| vlanPrivateEdgeGroupIfIndexEntry | 1.3.6.1.4.1.89.48.48.1 | not-accessible | entry of pve | |
| INT vlanPrivateEdgeGroupIfIndexID | 1.3.6.1.4.1.89.48.48.1.1 | INTEGER | read-only | specify the ifIndex group id. |
| INT vlanPrivateEdgeGroupIfIndexDomainID | 1.3.6.1.4.1.89.48.48.1.2 | INTEGER | read-only | specify the ifIndex group id. |
| vlanSubnetRangeTable | 1.3.6.1.4.1.89.48.49 | not-accessible | A table that contains mappings from subnet range to Group Identifiers used for Port-and-subnet-based VLAN Classification. | |
| vlanSubnetRangeEntry | 1.3.6.1.4.1.89.48.49.1 | not-accessible | A mapping from a subnet to a Group Identifier. | |
| IP vlanSubnetRangeAddr | 1.3.6.1.4.1.89.48.49.1.1 | IpAddress | read-only | The IP address of the range |
| INT vlanSubnetRangeMask | 1.3.6.1.4.1.89.48.49.1.2 | INTEGER | read-only | The numbers of continuous ones in the mask |
| INT vlanSubnetRangeGroupId | 1.3.6.1.4.1.89.48.49.1.3 | INTEGER | read-create | Represents a group of subnets that are associated together when assigning a VID to a frame. |
| ROW vlanSubnetRangeRowStatus | 1.3.6.1.4.1.89.48.49.1.4 | RowStatus | read-create | This object indicates the status of this entry. |
| vlanSubnetPortTable | 1.3.6.1.4.1.89.48.50 | not-accessible | A table that contains VID sets used for Port-and-subnet-based VLAN Classification. | |
| vlanSubnetPortEntry | 1.3.6.1.4.1.89.48.50.1 | not-accessible | A VID set for a port. | |
| INT vlanSubnetPortGroupId | 1.3.6.1.4.1.89.48.50.1.1 | INTEGER | not-accessible | Designates a group of subnets in the Group Database. |
| INT vlanSubnetPortGroupVid | 1.3.6.1.4.1.89.48.50.1.2 | INTEGER | read-create | The VID associated with a group of subnets for each port. |
| ROW vlanSubnetPortRowStatus | 1.3.6.1.4.1.89.48.50.1.3 | RowStatus | read-create | This object indicates the status of this entry. |
| vlanTriplePlayTable | 1.3.6.1.4.1.89.48.51 | not-accessible | TriplePlay table, map CPE vlan to multicastTvVlan | |
| vlanTriplePlayEntry | 1.3.6.1.4.1.89.48.51.1 | not-accessible | entry of TriplePlay table | |
| VLA vlanTriplePlayInnerVID | 1.3.6.1.4.1.89.48.51.1.1 | VlanIndex | not-accessible | Specifies the CPE inner vlan. |
| VLA vlanTriplePlayMulticastTvVID | 1.3.6.1.4.1.89.48.51.1.2 | VlanIndex | read-create | Specifies the multicast TV outer vlan. |
| ROW vlanTriplePlayRowStatus | 1.3.6.1.4.1.89.48.51.1.3 | RowStatus | read-create | The row status variable, used according to row creation and removal conventions. |
| vlanTriplePlayMulticastTvTable | 1.3.6.1.4.1.89.48.52 | not-accessible | TriplePlayMulticastTv table saves a list of ports for a certain multicastTvVlan | |
| vlanTriplePlayMulticatTvEntry | 1.3.6.1.4.1.89.48.52.1 | not-accessible | entry of triple play MulticastTv table | |
| VLA vlanTriplePlayMulticastTvMulticastTvVID | 1.3.6.1.4.1.89.48.52.1.1 | VlanIndex | read-only | Specifies the multicast TV external vlan. |
| POR vlanTriplePlayMulticastTvMulticastTvPortList | 1.3.6.1.4.1.89.48.52.1.2 | PortList | read-write | the multicast tv port list. |
| T/F vlanDefaultExtManagment | 1.3.6.1.4.1.89.48.53 | TruthValue | read-write | enable disable ext managment on default vlan. |
| vlanVoice | 1.3.6.1.4.1.89.48.54 | |||
| INT vlanVoiceAgingTimeout | 1.3.6.1.4.1.89.48.54.1 | INTEGER | read-write | The vlanVoiceAgingTimeout indicates the time (in units of minutes) from when the last OUI MAC was ageout from the FDB the port will be removed from the Voice VLAN. The default value for vlanVoiceAgingTimeout object is 1440 minutes (24 hours). The value of this object must be restored from non-volatile storage after a re-initialization of the management system. |
| vlanVoiceTable | 1.3.6.1.4.1.89.48.54.2 | not-accessible | A table containing static configuration information for each voice VLAN configured into the device and dynamic port membership. All entries are permanent and will be restored after the device is reset. | |
| vlanVoiceEntry | 1.3.6.1.4.1.89.48.54.2.1 | not-accessible | Information for a voice VLAN configured into the device by management. | |
| INT vlanVoicePriority | 1.3.6.1.4.1.89.48.54.2.1.1 | INTEGER | read-write | An administratively assigned Priority, which will be used for all traffic on the voice vlan, this gives the packets the requested priority (CoS) within the bridge. |
| T/F vlanVoicePriorityRemark | 1.3.6.1.4.1.89.48.54.2.1.2 | TruthValue | read-create | Remark VPT on tagged frames egress the voice vlan according. to priority true.false |
| ROW vlanVoiceRowStatus | 1.3.6.1.4.1.89.48.54.2.1.3 | RowStatus | read-create | This object indicates the status of this entry. |
| vlanVoiceOUITable | 1.3.6.1.4.1.89.48.54.3 | not-accessible | A table containing static global configuration information for Voice VLANs OUI MAC Prefixes. All entries are permanent and will be restored after the device is reset. | |
| vlanVoiceOUIEntry | 1.3.6.1.4.1.89.48.54.3.1 | not-accessible | Information for a voice VLANs OUI MAC Prefixes configured into the device by management. | |
| OCT vlanVoiceOUIPrefix | 1.3.6.1.4.1.89.48.54.3.1.1 | OCTET STRING | not-accessible | The index value used to identify the OUI MAC Prefix component associated with this entry. The value of this object is used as an index to the vlanVoiceOUITable. Voice VLANs OUI Prefix is the first 3 most significant octets of the MAC address. |
| STR vlanVoiceOUIDescription | 1.3.6.1.4.1.89.48.54.3.1.2 | DisplayString | read-write | An optional text that describes the OUI. |
| ROW vlanVoiceOUIEntryRowStatus | 1.3.6.1.4.1.89.48.54.3.1.3 | RowStatus | read-create | This object indicates the status of this entry. |
| vlanVoicePortTable | 1.3.6.1.4.1.89.48.54.4 | not-accessible | A table containing static and dynamic per port configuration information for Voice VLAN. All entries are permanent and will be restored after the device is reset. | |
| vlanVoicePortEntry | 1.3.6.1.4.1.89.48.54.4.1 | not-accessible | Static and dynamic per port information for a voice VLAN. | |
| T/F vlanVoicePortEnable | 1.3.6.1.4.1.89.48.54.4.1.1 | TruthValue | read-write | Enable this port to be a candidate to be added into the Voice VLAN. |
| VLA vlanVoicePortVlanIndex | 1.3.6.1.4.1.89.48.54.4.1.2 | VlanIndex | read-write | The Voice VLAN-ID the port is a candidate to be in. |
| T/F vlanVoicePortSecure | 1.3.6.1.4.1.89.48.54.4.1.3 | TruthValue | read-write | Specify this port to be in Secure Mode when entering the Voice VLAN. In Secure mode only frames with MAC prefix matched to one of the OUI table prefixes are accepted, otherwise dropped. |
| INT vlanVoicePortCurrentMembership | 1.3.6.1.4.1.89.48.54.4.1.4 | INTEGER | read-only | Port's current status of membership in Voice VLAN. Port's possible values of membership in Voice VLAN: 'Active(1)' - Port is currently added to a Voice VLAN . 'NotActive(2)' - Specifies either that port is a candidate to be in Voice VLAN or disabled. |
| INT vlanVoicePortQosMode | 1.3.6.1.4.1.89.48.54.4.1.5 | INTEGER | read-write | Port's current QOS mode in Voice VLAN. Possible values: 'src(1)' - Only traffic with OUI prefix in the source MAC received QOS of the Voice Vlan. 'all(2)' - All traffic through that port received QOS of the Voice Vlan. |
| T/F vlanVoiceOUISetToDefault | 1.3.6.1.4.1.89.48.54.5 | TruthValue | read-write | The vlanVoiceOUISetToDefault indicates that vlanVoiceOUITable should be set to it's default values if existed (OUI default prefixes). To do so the vlanVoiceOUITable should be previuosly deleted by usual entries destroying. This object behaviors as write-only than reading this object will always return 'false'. |
| vlanDefault | 1.3.6.1.4.1.89.48.55 | |||
| POR vlanDefaultTaggedPorts | 1.3.6.1.4.1.89.48.55.1 | PortList | read-write | list of default valn tagged ports. |
| POR vlanDefaultEnabledPorts | 1.3.6.1.4.1.89.48.55.2 | PortList | read-write | List of default VLAN membership enabled ports. |
| vlanInetTriplePlayTable | 1.3.6.1.4.1.89.48.56 | not-accessible | TriplePlay table, map CPE vlan to multicastTvVlan | |
| vlanInetTriplePlayEntry | 1.3.6.1.4.1.89.48.56.1 | not-accessible | entry of TriplePlay table | |
| IPt vlanInetTriplePlayInetAddressType | 1.3.6.1.4.1.89.48.56.1.1 | InetAddressType | read-only | Inet type IPv4/IPv6. |
| VLA vlanInetTriplePlayInnerVID | 1.3.6.1.4.1.89.48.56.1.2 | VlanIndex | not-accessible | Specifies the CPE inner vlan. |
| VLA vlanInetTriplePlayMulticastTvVID | 1.3.6.1.4.1.89.48.56.1.3 | VlanIndex | read-create | Specifies the multicast TV outer vlan. |
| ROW vlanInetTriplePlayRowStatus | 1.3.6.1.4.1.89.48.56.1.4 | RowStatus | read-create | The row status variable, used according to row creation and removal conventions. |
| vlanInetTriplePlayMulticastTvTable | 1.3.6.1.4.1.89.48.57 | not-accessible | TriplePlayMulticastTv table saves a list of ports for a certain multicastTvVlan | |
| vlanInetTriplePlayMulticatTvEntry | 1.3.6.1.4.1.89.48.57.1 | not-accessible | entry of triple play MulticastTv table | |
| VLA vlanInetTriplePlayMulticastTvMulticastTvVID | 1.3.6.1.4.1.89.48.57.1.1 | VlanIndex | read-only | Specifies the multicast TV external vlan. |
| POR vlanInetTriplePlayMulticastTvMulticastTvPortList | 1.3.6.1.4.1.89.48.57.1.2 | PortList | read-write | the multicast tv port list. |
| T/F vlanAsymmetricEnabled | 1.3.6.1.4.1.89.48.58 | TruthValue | read-write | Indicates enabled or disabled of Asymetric Vlan |
| vlanPrivateTable | 1.3.6.1.4.1.89.48.59 | not-accessible | Private vlan table which contains the private vlan entries. | |
| vlanPrivateEntry | 1.3.6.1.4.1.89.48.59.1 | not-accessible | Private vlan entry which contains the private vlan definition. | |
| VLA vlanPrivateVid | 1.3.6.1.4.1.89.48.59.1.1 | VlanIndex | not-accessible | The static vlan ID which is set to one of the private vlan types. |
| INT vlanPrivateType | 1.3.6.1.4.1.89.48.59.1.2 | INTEGER | read-write | private vlan types: primary - Carries traffic from promiscuous ports. promiscuous port can communicate with all ports of the same PVLAN, including the isolated and community ports of the same PVLAN. isolated - Carries traffic from isolated ports. isolated ports can communicate only with the promiscuous ports of the same PVLAN. community - Carries traffic from community ports. community ports of the same community can communicate among themselves and with the promiscuous ports of the same PVLAN. |
| VLA vlanPrivatePrimaryVid | 1.3.6.1.4.1.89.48.59.1.3 | VlanIndex | read-only | The primary vlan ID which has defined in VlanPrivateEntry and which is associated with secondary vlan (in vlanPrivateMapTable). vlanPrivatePrimaryVid is equivalent to vlanPrivateVid when vlanPrivateVid is primary vlan. |
| ROW vlanPrivateStatus | 1.3.6.1.4.1.89.48.59.1.4 | RowStatus | read-write | The row status variable, used according to row installation and removal conventions. |
| vlanPrivateMapTable | 1.3.6.1.4.1.89.48.60 | not-accessible | Private vlan mapping table which contains the private vlan mapping entries. | |
| vlanPrivateMapEntry | 1.3.6.1.4.1.89.48.60.1 | not-accessible | Private vlan mapping entry which contains the primary / secondary private vlan association and their ports membership. | |
| VLA vlanPrivateMapPrimaryVid | 1.3.6.1.4.1.89.48.60.1.1 | VlanIndex | not-accessible | The primary private vlan ID which is associated with the secondary (isolated or community) vlan (vlanPrivateMapSecondaryVid). |
| VLA vlanPrivateMapSecondaryVid | 1.3.6.1.4.1.89.48.60.1.2 | VlanIndex | not-accessible | The secondary private vlan ID which is associated with the primary vlan (vlanPrivateMapPrimaryVid). |
| POR vlanPrivateMapPrimaryPorts | 1.3.6.1.4.1.89.48.60.1.3 | PortList | read-write | The private vlan promiscuous ports mode which are belongs to the association of vlanPrivateMapPrimaryVid and vlanPrivateMapSecondaryVid. |
| POR vlanPrivateMapSecondaryPorts | 1.3.6.1.4.1.89.48.60.1.4 | PortList | read-write | The private vlan host ports mode which are belongs to the association of vlanPrivateMapPrimaryVid and vlanPrivateMapSecondaryVid. |
| POR vlanPrivateMapPrimaryOperPorts | 1.3.6.1.4.1.89.48.60.1.5 | PortList | read-only | The private vlan active promiscuous ports mode which are belongs to the association of vlanPrivateMapPrimaryVid and vlanPrivateMapSecondaryVid. |
| POR vlanPrivateMapSecondaryOperPorts | 1.3.6.1.4.1.89.48.60.1.6 | PortList | read-only | The private vlan active host ports mode which are belongs to the association of vlanPrivateMapPrimaryVid and vlanPrivateMapSecondaryVid. |
| ROW vlanPrivateMapStatus | 1.3.6.1.4.1.89.48.60.1.7 | RowStatus | read-write | The row status variable, used according to row installation and removal conventions. |
| vlanTrunkPortModeTable | 1.3.6.1.4.1.89.48.61 | not-accessible | The tables contains trunk mode port entries. | |
| vlanTrunkPortModeEntry | 1.3.6.1.4.1.89.48.61.1 | not-accessible | The entry contains port ifIndex,native vlan id and vlan list the port has a membership. The vlan list can contain not created vlans. | |
| VLA vlanTrunkPortModeNativeVlanId | 1.3.6.1.4.1.89.48.61.1.1 | VlanIndex | read-write | Indicated native vlan index.Default value 0 |
| VLA vlanTrunkModeList1to1024 | 1.3.6.1.4.1.89.48.61.1.2 | VlanList1 | read-write | vlan trunk mode list 1. Default value is {0} |
| VLA vlanTrunkModeList1025to2048 | 1.3.6.1.4.1.89.48.61.1.3 | VlanList2 | read-write | vlan trunk mode list 2. Default value is {0} |
| VLA vlanTrunkModeList2049to3072 | 1.3.6.1.4.1.89.48.61.1.4 | VlanList3 | read-write | vlan trunk mode list 3. Default value is {0} |
| VLA vlanTrunkModeList3073to4094 | 1.3.6.1.4.1.89.48.61.1.5 | VlanList4 | read-write | vlan trunk mode list 4. Default value is {0} |
| vlanAccessPortModeTable | 1.3.6.1.4.1.89.48.62 | not-accessible | The tables contains access mode port entries. | |
| vlanAccessPortModeEntry | 1.3.6.1.4.1.89.48.62.1 | not-accessible | The entry contains port ifIndex,access vlan id and multicast TV vlan id. | |
| VLA vlanAccessPortModeVlanId | 1.3.6.1.4.1.89.48.62.1.1 | VlanIndex | read-write | Indicated access vlan id.Default value is 0 |
| VLA vlanAccessPortModeMcstTvVlanId | 1.3.6.1.4.1.89.48.62.1.2 | VlanIndex | read-write | Indicated multicast TV vlan id. |
| vlanCustomerPortModeTable | 1.3.6.1.4.1.89.48.63 | not-accessible | The tables contains customer mode port entries. | |
| vlanCustomerPortModeEntry | 1.3.6.1.4.1.89.48.63.1 | not-accessible | The entry contains port ifIndex,customer vlan id and customer multicast TV vlan id. | |
| VLA vlanCustomerPortModeVlanId | 1.3.6.1.4.1.89.48.63.1.1 | VlanIndex | read-write | Indicated customer vlan id.Default value is 0 |
| VLA vlanCustomerPortModeMtvList1to1024 | 1.3.6.1.4.1.89.48.63.1.2 | VlanList1 | read-only | vlan customer port mode multicast TV list 1. Default value is {0} |
| VLA vlanCustomerPortModeMtvList1025to2048 | 1.3.6.1.4.1.89.48.63.1.3 | VlanList2 | read-only | vlan customer port mode multicast TV list 2. Default value is {0} |
| VLA vlanCustomerPortModeMtvList2049to3072 | 1.3.6.1.4.1.89.48.63.1.4 | VlanList3 | read-only | vlan customer port mode multicast TV list 3. Default value is {0} |
| VLA vlanCustomerPortModeMtvList3073to4094 | 1.3.6.1.4.1.89.48.63.1.5 | VlanList4 | read-only | vlan customer port mode multicast TV list 4. Default value is {0} |
| vlanSwitchPortModeTable | 1.3.6.1.4.1.89.48.64 | not-accessible | The table defines L3/L2 port context. | |
| vlanSwitchPortModeEntry | 1.3.6.1.4.1.89.48.64.1 | not-accessible | The entry contains port ifIndex and switch port enable value. | |
| INT vlanSwitchPortModeCategory | 1.3.6.1.4.1.89.48.64.1.1 | INTEGER | read-write | Indicated if a port is switchport (l2 port) or no switchport (l3 port) 1 - switchport 2 - no switchport. Default is 1 |
| vlanPortModeContextTable | 1.3.6.1.4.1.89.48.65 | not-accessible | The tables contains current port mode context entries. | |
| vlanPortModeContextEntry | 1.3.6.1.4.1.89.48.65.1 | not-accessible | The entry contains current port mode context. | |
| INT vlanPortModeContextValue | 1.3.6.1.4.1.89.48.65.1.1 | INTEGER | read-write | Indicated port context value: 0. Lag 1. Monitor 2. L3 3. RAVA 4. Dot1x 5. Dot1q 6. Access 7. Trunk 8. Customer 9. PV_promisc 10. PV_host |
| INT vlanRsvlEnable | 1.3.6.1.4.1.89.48.66 | INTEGER | read-write | Enable / Disable Shared Vlans at the device. |
| vlanRsvlMapTable | 1.3.6.1.4.1.89.48.67 | not-accessible | Shared vlan learning mapping table which contains the SVL mapping entries. | |
| vlanRsvlMapEntry | 1.3.6.1.4.1.89.48.67.1 | not-accessible | SVL mapping entry which contains the primary / secondary SVL association. | |
| VLA vlanRsvlMapPrimaryVid | 1.3.6.1.4.1.89.48.67.1.1 | VlanIndex | not-accessible | The primary SVL ID which is associated with the secondary shared vlan vlanRsvlMapSecondaryVid. |
| VLA vlanRsvlMapSecondaryVid | 1.3.6.1.4.1.89.48.67.1.2 | VlanIndex | not-accessible | The secondary SVL ID which is associated with the primary shared vlan vlanRsvlMapPrimaryVid. |
| ROW vlanRsvlMapStatus | 1.3.6.1.4.1.89.48.67.1.3 | RowStatus | read-write | The row status variable, used according to row installation and removal conventions. |
| rldot1qPortVlanStaticTable | 1.3.6.1.4.1.89.48.68 | not-accessible | A table containing static vlan port membership information. | |
| rldot1qPortVlanStaticEntry | 1.3.6.1.4.1.89.48.68.1 | not-accessible | Static vlan membership information per port | |
| VLA rldot1qPortVlanStaticEgressList1to1024 | 1.3.6.1.4.1.89.48.68.1.1 | VlanList1 | read-write | The port egress vlan static list.Default value is {0} |
| VLA rldot1qPortVlanStaticEgressList1025to2048 | 1.3.6.1.4.1.89.48.68.1.2 | VlanList2 | read-write | The port egress vlan static list.Default value is {0} |
| VLA rldot1qPortVlanStaticEgressList2049to3072 | 1.3.6.1.4.1.89.48.68.1.3 | VlanList3 | read-write | The port egress vlan static list.Default value is {0} |
| VLA rldot1qPortVlanStaticEgressList3073to4094 | 1.3.6.1.4.1.89.48.68.1.4 | VlanList4 | read-write | The port egress vlan static list.Default value is {0} |
| VLA rldot1qPortVlanStaticUntaggedEgressList1to1024 | 1.3.6.1.4.1.89.48.68.1.5 | VlanList1 | read-write | The port egress untagged vlan static list.Default value is {0} |
| VLA rldot1qPortVlanStaticUntaggedEgressList1025to2048 | 1.3.6.1.4.1.89.48.68.1.6 | VlanList2 | read-write | The port egress untagged vlan static list.Default value is {0} |
| VLA rldot1qPortVlanStaticUntaggedEgressList2049to3072 | 1.3.6.1.4.1.89.48.68.1.7 | VlanList3 | read-write | The port egress untagged vlan static list.Default value is {0} |
| VLA rldot1qPortVlanStaticUntaggedEgressList3073to4094 | 1.3.6.1.4.1.89.48.68.1.8 | VlanList4 | read-write | The port egress untagged vlan static list.Default value is {0} |
| VLA rldot1qPortVlanStaticForbiddenList1to1024 | 1.3.6.1.4.1.89.48.68.1.9 | VlanList1 | read-write | The port forbidden vlan static list.Default value is {0} |
| VLA rldot1qPortVlanStaticForbiddenList1025to2048 | 1.3.6.1.4.1.89.48.68.1.10 | VlanList2 | read-write | The port forbidden vlan static list.Default value is {0} |
| VLA rldot1qPortVlanStaticForbiddenList2049to3072 | 1.3.6.1.4.1.89.48.68.1.11 | VlanList3 | read-write | The port forbidden vlan static list.Default value is {0} |
| VLA rldot1qPortVlanStaticForbiddenList3073to4094 | 1.3.6.1.4.1.89.48.68.1.12 | VlanList4 | read-write | The port forbidden vlan static list.Default value is {0} |
| rldot1qVlanStaticListTable | 1.3.6.1.4.1.89.48.69 | not-accessible | A table contains only one entry of a static vlan list. | |
| rldot1qVlanStaticListEntry | 1.3.6.1.4.1.89.48.69.1 | not-accessible | Staticly created by local or network management vlan list | |
| INT rldot1qVlanStaticListIndex | 1.3.6.1.4.1.89.48.69.1.1 | INTEGER | read-write | An index is entrie's sequence. This field substitutes a vlan type. If the vlan was created by user configuration then the type is static. If the vlan was created by GVRP/MVRP protocols then the type is dynamicGvrp. If the vlan was created by Radius server attribute assignment mechanism then the type is dynamicRava. |
| VLA rldot1qVlanStaticList1to1024 | 1.3.6.1.4.1.89.48.69.1.2 | VlanList1 | read-write | A list of staticaly created vlans from 1 to 1024. |
| VLA rldot1qVlanStaticList1025to2048 | 1.3.6.1.4.1.89.48.69.1.3 | VlanList2 | read-write | A list of according to the type field created vlans from 1025 to 2048. |
| VLA rldot1qVlanStaticList2049to3072 | 1.3.6.1.4.1.89.48.69.1.4 | VlanList3 | read-write | A list of according to the type field created vlans from 2049 to 3072. |
| VLA rldot1qVlanStaticList3073to4094 | 1.3.6.1.4.1.89.48.69.1.5 | VlanList4 | read-write | A list of according to the type field created vlans from 3073 to 4094. |
| rldot1qVlanStaticNameTable | 1.3.6.1.4.1.89.48.70 | not-accessible | A table contains created by user vlans names. | |
| rldot1qVlanStaticNameEntry | 1.3.6.1.4.1.89.48.70.1 | not-accessible | Staticly created by local or network management vlan list | |
| STR rldot1qVlanStaticName | 1.3.6.1.4.1.89.48.70.1.1 | SnmpAdminString | read-write | An administratively assigned string,which may be used to identify the VLAN. The VLAN name must be unique or no name. |
| rlPortVlanTriplePlayMulticastTvTable | 1.3.6.1.4.1.89.48.71 | not-accessible | A table saves a list of vlans per port/lag. | |
| rlPortVlanTriplePlayMulticastTvEntry | 1.3.6.1.4.1.89.48.71.1 | not-accessible | Entry of Triple Play Multicast Tv table. | |
| VLA rlPortVlanTriplePlayMulticastTvList1to1024 | 1.3.6.1.4.1.89.48.71.1.1 | VlanList1 | read-write | A list of staticaly created Triple Play MTV vlans from 1 to 1024. |
| VLA rlPortVlanTriplePlayMulticastTvList1025to2048 | 1.3.6.1.4.1.89.48.71.1.2 | VlanList2 | read-write | A list of staticaly created Triple Play MTV vlans from 1025 to 2048. |
| VLA rlPortVlanTriplePlayMulticastTvList2049to3072 | 1.3.6.1.4.1.89.48.71.1.3 | VlanList3 | read-write | A list of staticaly created Triple Play MTV vlans from 2049 to 3072. |
| VLA rlPortVlanTriplePlayMulticastTvList3073to4094 | 1.3.6.1.4.1.89.48.71.1.4 | VlanList4 | read-write | A list of staticaly created Triple Play MTV vlans from 3073 to 4094. |
| rldot1qVlanMembershipTypeTable | 1.3.6.1.4.1.89.48.72 | not-accessible | A table contains a bitmap of the VLAN owners(applications) that can create the VLAN and/or add a port to the VLAN. | |
| rldot1qVlanMembershipTypeEntry | 1.3.6.1.4.1.89.48.72.1 | not-accessible | Staticly or dynamicly created VLAN ID owner entry | |
| INT rldot1qVlanMembershipTypeBitmap | 1.3.6.1.4.1.89.48.72.1.1 | INTEGER | read-only | This field contains a bitmap of owners that can creates and/or add a port to the VLAN. There exist three such type of owners : Default VLAN Manual created VLAN Dynamic(RAVA)created VLAN GVRP(MVRP)created VLAN |
RFC description
RADLAN VLAN configuration for multicast, private edge, and subnet-based membership.
Start monitoring Marvell/Radlan-based managed switch (VLAN configuration) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.