NETGEAR-MVR-PRIVATE-MIB

All MIBs › NETGEAR-MVR-PRIVATE-MIB

Organization: Netgear Inc

Last Updated: 2011-01-26

Category: Multicast, VLAN Management

Description: Manages Multicast VLAN Registration (MVR) group membership and port configuration on Netgear switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is NETGEAR-MVR-PRIVATE-MIB?

NETGEAR-MVR-PRIVATE-MIB is a private Netgear MIB for configuring Multicast VLAN Registration (MVR) on Netgear switches, controlling how multicast group membership and forwarding are shared across VLANs for services like IPTV. No sample objects were available in the provided source, so specific table/field names cannot be enumerated here, but by design an MVR MIB would expose per-port MVR role, VLAN association, and multicast group membership configuration. Its monitoring relevance would be in confirming multicast group membership and port roles are correctly provisioned, which affects whether multicast traffic (e.g., video streams) reaches the correct receiver ports across VLAN boundaries. It builds on the general IGMP/multicast VLAN registration concept standardized informally across switch vendors. It would be deployed on Netgear managed switches used to deliver multicast services such as IPTV across a Layer 2 network. Engineers can download the NETGEAR-MVR-PRIVATE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in NETGEAR-MVR-PRIVATE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Netgear ProSAFe managed switches (MVR-capable models)

Monitoring Examples

No sample objects were provided for this MIB, so a concrete object-level polling scenario cannot be constructed from the available material. In general, an MVR MIB of this kind would typically be polled for per-port MVR role and group membership status to verify multicast forwarding is working as configured, but specific object names are not confirmed here.

Imported Objects

From IF-MIB

InterfaceIndex
ifIndex	OBJECT-TYPE

From Q-BRIDGE-MIB

VlanIndex

From QUANTA-LB6M-REF-MIB

lb6m	OBJECT-IDENTITY

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TimeInterval
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
fastpathMvr	1.3.6.1.4.1.4526.10.50			The Netgear Private MIB for MVR Configuration
mvrGlobalConfig	1.3.6.1.4.1.4526.10.50.1
T/F mvrAdminMode	1.3.6.1.4.1.4526.10.50.1.1	TruthValue	read-write	Enable/Disable MVR. The value true(1) indicates that MVR is enabled A value of false(2) indicates that MVR is disabled.
INT mvrModeType	1.3.6.1.4.1.4526.10.50.1.2	INTEGER	read-write	Shows/Changes MVR mode. The value compatible(1) indicates that compatible mode is enabled. A value of dynamic(2) indicates that dynamic mode is enabled.
VLA mvrMulticastVlanId	1.3.6.1.4.1.4526.10.50.1.3	VlanIndex	read-write	Shows/Changes the Multicast Vlan number.
INT mvrMaxMulticastGroupsCount	1.3.6.1.4.1.4526.10.50.1.4	INTEGER	read-only	The maximum number of multicast groups that is supported by MVR.
INT mvrCurrentMulticastGroupsCount	1.3.6.1.4.1.4526.10.50.1.5	INTEGER	read-only	The current number of MVR groups allocated.
NUM mvrQueryTime	1.3.6.1.4.1.4526.10.50.1.6	TimeInterval	read-write	Shows/Changes the MVR Query time, in centiseconds.
mvrPortTable	1.3.6.1.4.1.4526.10.50.2		not-accessible	A table of MVR control information about every bridge port. This is indexed by mvrBasePort.
mvrPortEntry	1.3.6.1.4.1.4526.10.50.2.1		not-accessible	MVR control information for a bridge port.
T/F mvrPortMvrEnabled	1.3.6.1.4.1.4526.10.50.2.1.1	TruthValue	read-write	Enable\Disable MVR on port. The value true(1) indicates that MVR is enabled. A value of false(2) indicates that MVR is disabled.
INT mvrPortType	1.3.6.1.4.1.4526.10.50.2.1.2	INTEGER	read-write	MVR Interface type.
T/F mvrPortImmediateLeaveMode	1.3.6.1.4.1.4526.10.50.2.1.3	TruthValue	read-write	Shows/Changes Immediate Leave mode for MVR port. The value true(1) indicates that the port is in Immediate Leave mode. A value of false(2) indicates that the port is not in Immediate Leave mode.
INT mvrPortStatus	1.3.6.1.4.1.4526.10.50.2.1.4	INTEGER	read-only	The interface status.
mvrGroupsTable	1.3.6.1.4.1.4526.10.50.3		not-accessible	A table of MVR groups.
mvrGroupEntry	1.3.6.1.4.1.4526.10.50.3.1		not-accessible	MVR information of membership group.
IP mvrGroupIPAddress	1.3.6.1.4.1.4526.10.50.3.1.1	IpAddress	read-create	The multicast Group IP address.
INT mvrGroupStatus	1.3.6.1.4.1.4526.10.50.3.1.2	INTEGER	read-only	The status of the specific MVR group.
ROW mvrGroupRowStatus	1.3.6.1.4.1.4526.10.50.3.1.3	RowStatus	read-create	The status of this conceptual row.To create a row in this table, a manager must set this object to 'createAndGo'(4) .To delete a row in this table, a manager must set this object to `destroy'(6)
mvrPortMembershipTable	1.3.6.1.4.1.4526.10.50.4		not-accessible	A table of MVR membership groups.
mvrPortMembershipEntry	1.3.6.1.4.1.4526.10.50.4.1		not-accessible	MVR information of membership group.
IP mvrPortMembershipGroupIPAddress	1.3.6.1.4.1.4526.10.50.4.1.1	IpAddress	read-create	The multicast Group IP address.
NUM mvrPortMembershipPortIfIndex	1.3.6.1.4.1.4526.10.50.4.1.2	InterfaceIndex	read-create	Interface index in 'ifTable'.
ROW mvrPortMembershipRowStatus	1.3.6.1.4.1.4526.10.50.4.1.3	RowStatus	read-create	The status of this conceptual row.To create a row in this table, a manager must set this object to 'createAndGo'(4) .To delete a row in this table, a manager must set this object to `destroy'(6)
mvrStatistics	1.3.6.1.4.1.4526.10.50.5
U32 mvrIGMPQueryReceived	1.3.6.1.4.1.4526.10.50.5.1	Unsigned32	read-only	Number of received IGMP Queries.
U32 mvrIGMPReportV1Received	1.3.6.1.4.1.4526.10.50.5.2	Unsigned32	read-only	Number of received IGMP Reports V1.
U32 mvrIGMPReportV2Received	1.3.6.1.4.1.4526.10.50.5.3	Unsigned32	read-only	Number of received IGMP Reports V1.
U32 mvrIGMPLeaveReceived	1.3.6.1.4.1.4526.10.50.5.4	Unsigned32	read-only	Number of received IGMP Leaves.
U32 mvrIGMPQueryTransmitted	1.3.6.1.4.1.4526.10.50.5.5	Unsigned32	read-only	Number of transmitted IGMP Queries.
U32 mvrIGMPReportV1Transmitted	1.3.6.1.4.1.4526.10.50.5.6	Unsigned32	read-only	Number of transmitted IGMP Reports V1.
U32 mvrIGMPReportV2Transmitted	1.3.6.1.4.1.4526.10.50.5.7	Unsigned32	read-only	Number of transmitted IGMP Reports V2.
U32 mvrIGMPLeaveTransmitted	1.3.6.1.4.1.4526.10.50.5.8	Unsigned32	read-only	Number of transmitted IGMP Leaves.
U32 mvrIGMPPacketReceiveFailures	1.3.6.1.4.1.4526.10.50.5.9	Unsigned32	read-only	Number of failures on receiving the IGMP packets.
U32 mvrIGMPPacketTransmitFailures	1.3.6.1.4.1.4526.10.50.5.10	Unsigned32	read-only	Number of failures on transmitting the IGMP packets.

RFC description

Netgear private MIB for managing Multicast VLAN Registration (MVR) functionality on Netgear switches, enabling efficient multicast traffic handling across VLANs.

Start monitoring Netgear ProSAFe managed switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download NETGEAR-MVR-PRIVATE-MIB

What Is NETGEAR-MVR-PRIVATE-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description