All MIBs › DLINKPRIME-VLAN-MIB › dpVlanPortIfTagAllowVlanLstSecond2K
dpVlanPortIfTagAllowVlanLstSecond2K
Module: DLINKPRIME-VLAN-MIB
OID (symbolic): DLINKPRIME-VLAN-MIB::dpVlanPortIfTagAllowVlanLstSecond2K
OID (numeric): 1.3.6.1.4.1.171.28.26.1.1.1.5
Node type: OBJECT-TYPE
Type: Dlink2kVlanList
Access: read-write
Description: This object specifies the VLANs in a string of octets containing one bit per VLAN for VLANs 2049 to 4094.
If the bit is set to '1', then the interface is allowed to be the VLAN's tagged member.
Note: This value is meaningful only when the VLAN mode of the port is one of the 'hybrid', 'trunk', 'privateVlanTrunkPromiscuous' or 'privateVlanTrunkSecondary'
What is dpVlanPortIfTagAllowVlanLstSecond2K?
This is the companion bitmap to dpVlanPortIfTagAllowVlanLstFirst2K, covering the higher VLAN range 2049 through 4094, one bit per VLAN indicating tagged-member permission. It applies under the same hybrid/trunk/private-VLAN-trunk port modes, letting the device split the full 4094-VLAN tag-allow list across two 2K-wide octet strings since a single object can't address the whole range compactly. An admin extending a trunk to also carry VLAN 3000 tagged would set the corresponding bit in dpVlanPortIfTagAllowVlanLstSecond2K.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.28.26.1.1.1.5 snmpwalk -v2c -c public <target> DLINKPRIME-VLAN-MIB::dpVlanPortIfTagAllowVlanLstSecond2K
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.28.26.1.1.1.5.1 snmpget -v2c -c public <target> DLINKPRIME-VLAN-MIB::dpVlanPortIfTagAllowVlanLstSecond2K.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.171.28.26.1.1.1.5.1 s <value>
Start monitoring D-Link Prime series switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DLINKPRIME-VLAN-MIB::dpVlanPortIfTagAllowVlanLstSecond2K OID value, configure state conditions and alerts, and monitor any D-Link Prime series switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.28 | dlinkPrimeCommon | DLINK-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171.28.26 | dlinkPrimeVlanMIB | DLINKPRIME-VLAN-MIB |
| 1.3.6.1.4.1.171.28.26.1 | dpVlanMIBObjects | DLINKPRIME-VLAN-MIB |
| 1.3.6.1.4.1.171.28.26.1.1 | dpVlanPortIfCtrlTable | DLINKPRIME-VLAN-MIB |
| 1.3.6.1.4.1.171.28.26.1.1.1 | dpVlanPortIfCtrlEntry | DLINKPRIME-VLAN-MIB |
| 1.3.6.1.4.1.171.28.26.1.1.1.5 | dpVlanPortIfTagAllowVlanLstSecond2K | DLINKPRIME-VLAN-MIB |