| OID symbolic | OID numeric | Type | Access | Description |
|---|
| ctWanMultiMux | 1.3.6.1.4.1.52.4.1.2.7.3.2 | | | |
| ctWANMMuxGeneralGroup | 1.3.6.1.4.1.52.4.1.2.7.3.2.1 | | | |
| INT ctWANMMuxMaxNum | 1.3.6.1.4.1.52.4.1.2.7.3.2.1.1 | INTEGER | read-only | Get the maximum number of Inverse Multiplexer
applications allowed to be programmed for this IP host. |
| ctWanMMuxTable | 1.3.6.1.4.1.52.4.1.2.7.3.2.2 | | not-accessible | Information describing the global parameters
that apply to Inverse Multiplexer entities. |
| ctWanMMuxEntry | 1.3.6.1.4.1.52.4.1.2.7.3.2.2.1 | | not-accessible | A description of a single Inverse Multiplexer entry. |
| INT ctWanMMuxId | 1.3.6.1.4.1.52.4.1.2.7.3.2.2.1.1 | INTEGER | read-only | A unique value identifying an element in a sequence of
Inverse Multiplexer Applications which belong to an IP
host. This value ranges from 1 to the maximum number of
programmable applications as described by
ctWANMMuxMaxNum. This index is associated
with a physical WAN interface containing multiple DS1
connections. |
| INT ctWanMMuxIfIndex | 1.3.6.1.4.1.52.4.1.2.7.3.2.2.1.2 | INTEGER | read-only | The value for this object is equal to the value of
ifIndex from the Interfaces table of MIB II (RFC 1213).
Specifically, this index is associated with the physical
interface containing multiple DS1 connections to be used
for Cabletron WAN Inverse Multiplexing. |
| INT ctWanMMuxMaxNumGroups | 1.3.6.1.4.1.52.4.1.2.7.3.2.2.1.3 | INTEGER | read-only | Get the maximum number of Inverse Multiplexer groups
allowed to be programmed for this IMUX entity. This value
is the number of physical WAN connections, divided by
the minimum number of channels for a single mux
to be operational (2). However, some devices may only
support a single inverse multiplexer group. |
| INT ctWanMMuxAdmin | 1.3.6.1.4.1.52.4.1.2.7.3.2.2.1.4 | INTEGER | read-write | Used to enable and disable an Inverse Multiplexer
Application. This object is used to enable/disable
Inverse Multiplexing for a single IMUX entity. Inverse
Multiplexer Groups may be enabled/disabled independently
using ctWanMMuxGroupAdmin. This object must be set to
enabled for any inverse multiplexing to occur on the
IMUX entity. |
| ctWanMMuxGroupTable | 1.3.6.1.4.1.52.4.1.2.7.3.2.3 | | not-accessible | Information describing the configured parameters
of one of the Inverse Multiplexer groups. |
| ctWanMMuxGroupEntry | 1.3.6.1.4.1.52.4.1.2.7.3.2.3.1 | | not-accessible | A description of a single Inverse Multiplexer group
entry. |
| INT ctWanMMuxGroupMMuxId | 1.3.6.1.4.1.52.4.1.2.7.3.2.3.1.1 | INTEGER | read-only | A unique value identifying an element in a sequence of
Inverse Multiplexer Applications which belong to an IP
host. This value ranges from 1 to the maximum number of
programmable applications as described by
ctWANMMuxMaxNum. This index is the same as
ctWanMMuxId. |
| INT ctWanMMuxGroupId | 1.3.6.1.4.1.52.4.1.2.7.3.2.3.1.2 | INTEGER | read-only | A unique value identifying an element in a sequence of
groups which belong to the WAN Inverse Multiplexer.
This value ranges from 1 to the maximum number of
programmable groups as described by
ctWANMMuxMaxNumGroups. |
| INT ctWanMMuxGroupAdmin | 1.3.6.1.4.1.52.4.1.2.7.3.2.3.1.3 | INTEGER | read-write | Used to enable and disable an Inverse Multiplexer
group which evenly distributes data traffic in a
properly sequenced fashion, over two or more single
channel Wide Area Network connections such as DS1,
E1, DDS, or SYNC. Each of the single channel
connections must be configured with an appropriate
datalink protocol. A minimum of two channels, each
assigned to it's own physical interface, is required
before the Inverse Multiplexer group can be enabled. |
| INT ctWanMMuxGroupNumChannels | 1.3.6.1.4.1.52.4.1.2.7.3.2.3.1.4 | INTEGER | read-only | Get the number of channels currently
associated with this Inverse Multiplexer group. A
minimum of two channels, each assigned to it's own
physical interface, is required before the Inverse
Multiplexer group can be enabled. |
| INT ctWanMMuxGroupAddChannel | 1.3.6.1.4.1.52.4.1.2.7.3.2.3.1.5 | INTEGER | read-write | Add a channel to the channel list used by this Inverse
Multiplexer group. Before a channel is added, the
channel must be assigned a MIB II ifindex, and an
acceptable Datalink Protocol. When this object is set,
it is set with the ifindex value. This object is always
read as a 1. |
| INT ctWanMMuxGroupDelChannel | 1.3.6.1.4.1.52.4.1.2.7.3.2.3.1.6 | INTEGER | read-write | Delete a channel to the channel list used by this
Inverse Multiplexer group. Before a channel is
deleted, the channel must exist in the Inverse
Multiplexer group's channel table. When this object
is set, it is set with the ifindex value of the channel
the user wishes to delete from the channel table. This
object is always read as a 1. |
| ctWanMMuxChannelTable | 1.3.6.1.4.1.52.4.1.2.7.3.2.4 | | not-accessible | Table containing ifindex values, representing WAN
channels, used by the Inverse Multiplexer. The table
also contains statistics reported about each channel. |
| ctWanMMuxChannelEntry | 1.3.6.1.4.1.52.4.1.2.7.3.2.4.1 | | not-accessible | A description of a single entry. |
| INT ctWanMMuxChannelMMuxId | 1.3.6.1.4.1.52.4.1.2.7.3.2.4.1.1 | INTEGER | read-only | A unique value identifying an element in a sequence of
Inverse Multiplexer Applications which belong to an IP
host. This value ranges from 1 to the maximum number of
programmable applications as described by
ctWANMMuxMaxNum. This index is the same as
ctWanMMuxId. |
| INT ctWanMMuxChannelGroupId | 1.3.6.1.4.1.52.4.1.2.7.3.2.4.1.2 | INTEGER | read-only | A unique value identifying an element in a sequence
of groups which belong to the WAN Inverse Multiplexer.
This value ranges from 1 to the maximum number of
programmable groups as described by
ctWANMMuxMaxNumGroups. |
| INT ctWanMMuxChannelId | 1.3.6.1.4.1.52.4.1.2.7.3.2.4.1.3 | INTEGER | read-only | A unique value identifying an element in a sequence of
member channel ifindex values which belong to a WAN
Inverse Multiplexer group. |
| INT ctWanMMuxChannelIfIndex | 1.3.6.1.4.1.52.4.1.2.7.3.2.4.1.4 | INTEGER | read-only | Returns an ifindex associated with a WAN
channel used for Inverse Multiplexing. |
| INT ctWanMMuxChannelPhysNum | 1.3.6.1.4.1.52.4.1.2.7.3.2.4.1.5 | INTEGER | read-only | Returns a unique physical connection identifier
associated with this channel's physical WAN
connection. |
| INT ctWanMMuxChannelBwAvail | 1.3.6.1.4.1.52.4.1.2.7.3.2.4.1.6 | INTEGER | read-only | Returns a value which represents the available
bandwidth for transmitting data existing for the
physical WAN connection associated with this channel.
The value is represented in bits/sec. |
| INT ctWanMMuxChannelByteCount | 1.3.6.1.4.1.52.4.1.2.7.3.2.4.1.7 | INTEGER | read-only | Returns a value which represents a cumulative count
of bytes transmitted out from this interface. The
count includes any bytes transmitted across the
physical medium, less physical medium framing. |
| INT ctWanMMuxChannelStatus | 1.3.6.1.4.1.52.4.1.2.7.3.2.4.1.8 | INTEGER | read-only | Returns the current status of the channel associated
with an inverse multiplexer group. The channel is
active when the group admin status is enabled, and
the channel is operational. The channel is inactive
when either the group admin status is disabled, or
the channel is not operational. |
