All MIBs › CTRON-WAN-MULTI-IMUX-MIB › ctWanMMuxGroupAdmin
ctWanMMuxGroupAdmin
Module: CTRON-WAN-MULTI-IMUX-MIB
OID (symbolic): CTRON-WAN-MULTI-IMUX-MIB::ctWanMMuxGroupAdmin
OID (numeric): 1.3.6.1.4.1.52.4.1.2.7.3.2.3.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Used to enable and disable an Inverse Multiplexer group which evenly distributes data traffic in a properly sequenced fashion, over two or more single channel Wide Area Network connections such as DS1, E1, DDS, or SYNC. Each of the single channel connections must be configured with an appropriate datalink protocol. A minimum of two channels, each assigned to it's own physical interface, is required before the Inverse Multiplexer group can be enabled.
What is ctWanMMuxGroupAdmin?
This read-write INTEGER enables or disables an inverse multiplexer group, which evenly distributes traffic in sequence over two or more single-channel WAN connections (such as DS1, E1, DDS, or SYNC); at least two channels on separate physical interfaces must be assigned to the group before it can be enabled. Admins use this to bring a bonded multi-channel WAN link into or out of service independently of other groups on the same IMUX entity. Setting ctWanMMuxGroupAdmin to enabled(2) after adding two DS1 channels via ctWanMMuxGroupAddChannel activates that bonded link for traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.7.3.2.3.1.3 snmpwalk -v2c -c public <target> CTRON-WAN-MULTI-IMUX-MIB::ctWanMMuxGroupAdmin
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.7.3.2.3.1.3.1 snmpget -v2c -c public <target> CTRON-WAN-MULTI-IMUX-MIB::ctWanMMuxGroupAdmin.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.2.7.3.2.3.1.3.1 i <value>
Start monitoring Cabletron WAN aggregation equipment (multi-link inverse multiplexer) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-WAN-MULTI-IMUX-MIB::ctWanMMuxGroupAdmin OID value, configure state conditions and alerts, and monitor any Cabletron WAN aggregation equipment (multi-link inverse multiplexer) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CT-PRIORITY-QUEUING |
| 1.3.6.1.4.1.52.4.1 | ctron | CTRON-ISDN-CONFIGURATION-MIB |
| 1.3.6.1.4.1.52.4.1.2 | ctDataLink | CTRON-ISDN-CONFIGURATION-MIB |
| 1.3.6.1.4.1.52.4.1.2.7 | ctronWan | CTRON-ISDN-CONFIGURATION-MIB |
| 1.3.6.1.4.1.52.4.1.2.7.3 | ctWanServices | CTRON-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.1.2.7.3.2 | ctWanMultiMux | CTRON-WAN-MULTI-IMUX-MIB |
| 1.3.6.1.4.1.52.4.1.2.7.3.2.3 | ctWanMMuxGroupTable | CTRON-WAN-MULTI-IMUX-MIB |
| 1.3.6.1.4.1.52.4.1.2.7.3.2.3.1 | ctWanMMuxGroupEntry | CTRON-WAN-MULTI-IMUX-MIB |
| 1.3.6.1.4.1.52.4.1.2.7.3.2.3.1.3 | ctWanMMuxGroupAdmin | CTRON-WAN-MULTI-IMUX-MIB |