All MIBs › CTRON-SSR-AGENTCAP-MIB
Organization: Cabletron Systems, Inc.
Last Updated: 2000-02-19
Description: Cabletron SSR firmware 3.1 agent-capabilities MIB declaring which standard and proprietary MIBs are supported on Cabletron Smart Switch Routers
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is CTRON-SSR-AGENTCAP-MIB?
CTRON-SSR-AGENTCAP-MIB is a Cabletron Systems, Inc. AGENT-CAPABILITIES MIB declaring an SSR (SmartSwitch Router) unit's conformance to firmware release 3.1's MIB suite, spanning ATM, BGP4, bridging, DS1/DS3, Ethernet, Frame Relay, OSPF, PPP, RADIUS, RIPv2, RMON, SONET, TCP/UDP, and VRRP support. It carries no data objects of its own — as a conformance-declaration module it registers which groups of each referenced standard MIB the SSR firmware implements. As a software-status MIB it lets an administrator confirm exactly which standard-MIB feature groups SSR firmware release 3.1 supports before relying on a specific object. It is deployed on Cabletron Systems SSR (SmartSwitch Router) platforms. Engineers can download the CTRON-SSR-AGENTCAP-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in CTRON-SSR-AGENTCAP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Cabletron Systems SSR (SmartSwitch Router) platforms
Monitoring Examples
An administrator checks this capability module to confirm which OSPF-MIB or RIPv2-MIB feature groups Cabletron SSR firmware release 3.1 actually implements before building monitoring around them.
Imported Objects
From ATM-MIB
| atmMIB | MODULE-IDENTITY |
From BGP4-MIB
| bgp | MODULE-IDENTITY |
From BRIDGE-MIB
| dot1dBase | OBJECT-IDENTITY |
From CTRON-LFAP-MIB
| ctLFAP | MODULE-IDENTITY |
| capacityMIB | MODULE-IDENTITY |
From CTRON-SSR-CONFIG-MIB
| ssrConfigMIB | MODULE-IDENTITY |
| hardwareMIB | MODULE-IDENTITY |
From CTRON-SSR-POLICY-MIB
| policyMIB | MODULE-IDENTITY |
From CTRON-SSR-SMI-MIB
| ssrMibs | OBJECT-IDENTITY |
From DS1-MIB
| ds1 | MODULE-IDENTITY |
From DS3-MIB
| ds3 | MODULE-IDENTITY |
From EtherLike-MIB
| etherMIB | MODULE-IDENTITY |
From FRAME-RELAY-DTE-MIB
| frameRelayDTE | MODULE-IDENTITY |
From IF-MIB
| ifMIB | MODULE-IDENTITY |
From IP-MIB
| ipMIB | MODULE-IDENTITY |
From OSPF-MIB
| ospf | MODULE-IDENTITY |
From OSPF-TRAP-MIB
| ospfTrap | MODULE-IDENTITY |
From P-BRIDGE-MIB
| pBridgeMIB | MODULE-IDENTITY |
From PPP-IP-NCP-MIB
| pppIp | OBJECT-IDENTITY |
From PPP-LCP-MIB
| ppp | OBJECT-IDENTITY |
From PPP-SEC-MIB
| pppSecurity | OBJECT-IDENTITY |
From Q-BRIDGE-MIB
| qBridgeMIB | MODULE-IDENTITY |
| radiusAuthClientMIB | MODULE-IDENTITY |
From RIPv2-MIB
| rip2 | MODULE-IDENTITY |
From RMON-MIB
| rmon | OBJECT-IDENTITY |
From SNMPv2-CONF
| AGENT-CAPABILITIES |
From SNMPv2-SMI
| MODULE-IDENTITY |
From SONET-MIB
| sonetMIB | MODULE-IDENTITY |
From TCP-MIB
| tcpMIB | MODULE-IDENTITY |
From UDP-MIB
| udpMIB | MODULE-IDENTITY |
From VRRP-MIB
| vrrpMIB | MODULE-IDENTITY |
OIDs
RFC description
Cabletron SSR agent capabilities defining support for routing protocols, interfaces, and network management features.
Start monitoring Cabletron/Enterasys Smart Switch Router (SSR) (firmware 3.1 conformance) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.