CTRON-SSR-CONFIG-MIB

All MIBs › CTRON-SSR-CONFIG-MIB

Organization: Cabletron Systems, Inc

Last Updated: 2000-07-15

Category: Device Management, Vendor: Cabletron/Enterasys

Description: Manages Cabletron SSR system-level configuration including interface settings and global routing parameters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CTRON-SSR-CONFIG-MIB?

CTRON-SSR-CONFIG-MIB is a Cabletron (Enterasys) enterprise MIB that provides an SNMP interface for managing SmartSwitch Router (SSR) configuration files and system images, as stated in its module description. It is oriented toward configuration and system-image management — for example, selecting or verifying which configuration file and firmware image a router is running — rather than exposing granular runtime hardware sensors. Its role in monitoring is largely as a software-version and configuration-state check: an operator would use it to confirm which system image/software version and configuration file are currently active on the device, directly relevant to detecting an unintended firmware or config rollback after a reboot. Based on the objects available in this batch (cfgGroup and conformance/compliance/group definitions), the module's concrete runtime data objects were not represented in the sampled data, so its practical use here leans toward conformance/structural definitions alongside a smaller set of config-file/image objects. It is deployed on Cabletron/Enterasys SmartSwitch Router (SSR) platforms in enterprise routing environments, where CTRON-SSR-CONFIG-MIB SNMP monitoring helps confirm the active configuration file and system image after a reboot.

IPNetwork Monitor allows you to monitor SNMP objects defined in CTRON-SSR-CONFIG-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cabletron/Enterasys SmartSwitch Router (SSR)

Monitoring Examples

The sampled objects for this MIB (cfgGroup, configConformance, configCompliances, configGroups) are primarily conformance/group definitions rather than runtime data objects, so a concrete monitoring walkthrough with real leaf objects can't be honestly constructed from what's available. Based on the module description, the practical use case would be an administrator checking which configuration file and system image are currently active/loaded on the SmartSwitch Router. Without further object names from the actual MIB body, more specific polling detail would be speculative.

What Can Be Monitored

active configuration file
active system image/software version

Imported Objects

From CTRON-SSR-SMI-MIB

ssrMibs

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
ssrConfigMIB	1.3.6.1.4.1.52.2501.1.230			This mib module defines an SNMP API to manage SmartSwitch Router configuration files and system images
configConformance	1.3.6.1.4.1.52.2501.1.230.3
configCompliances	1.3.6.1.4.1.52.2501.1.230.3.1
configCompliance	1.3.6.1.4.1.52.2501.1.230.3.1.1			The compliance statement for SNMP entities which implement the SmartSwitch Router Config Management MIB.
configCompliance2	1.3.6.1.4.1.52.2501.1.230.3.1.2			The compliance statement for SNMP entities which implement the SmartSwitch Router Config Management MIB.
configGroups	1.3.6.1.4.1.52.2501.1.230.3.2
configGroup10	1.3.6.1.4.1.52.2501.1.230.3.2.1			The collection of objects which are used to represent version 1.0 file transfer operations in the SmartSwitch Router.
configGroup20	1.3.6.1.4.1.52.2501.1.230.3.2.2			The collection of objects which are used to represent version 2.0 configuration operations in the SmartSwitch Router version.
cfgGroup	1.3.6.1.4.1.52.2501.1.231
INT cfgTransferOp	1.3.6.1.4.1.52.2501.1.231.1	INTEGER	read-write	Tranfer operation to be performed. Configuration files are ASCII NVT text files describing the operation of the shelf. Send operations use tftp to transfer a file from the manager to agent. Receive operations use tftp to transfer the file from the agent to the manager. Default value is no operation or noop.
IP cfgManagerAddress	1.3.6.1.4.1.52.2501.1.231.2	IpAddress	read-write	The IPv4 address of the Manager to be used by the agent for for cfgTransferOp operations. Default value is 0.0.0.0. Address must be a unicast address that is reachable from the agent and no firewalls/acls preventing tftp datagrams from being transferred.
STR cfgFileName	1.3.6.1.4.1.52.2501.1.231.3	DisplayString	read-write	The file name to be retrieved from the tftp server at host cfgManagerAddress or to be written to. Default value is blank. Length of filename string must not exceed 255 alpha-numeric characters, no spaces in filenames.
T/F cfgActivateTransfer	1.3.6.1.4.1.52.2501.1.231.4	TruthValue	read-write	Activate the file transfer operation with a value of True(1) or stop it with False(2). Poll cfgTransferStatus for current status. Default value is False. cfgFileName, cfgManagerAddress and cfgTransferOp must be valid prior to setting this object to True. This object is equivalent to the CLI command: copy tftp-server to startup if cfgRequestOp == sendConfig
INT cfgTransferStatus	1.3.6.1.4.1.52.2501.1.231.5	INTEGER	read-only	The current status of the transfer task. Default state is idle. sending indicates a file transfer (agent->mgr) in progress. receiving indicates sending a file from Manager to agent. transferComplete indicates a successful transfer. error indicates a failed transfer. See cfgLastError to diagnose why the transfer failed.
T/F cfgActivateFile	1.3.6.1.4.1.52.2501.1.231.6	TruthValue	read-write	Once a transfer to the SmartSwitchRouter is complete, Set this object to True to activate the new configuration. If activateConfigFile operation was successful, this object performs the CLI equivalent to these commands: negate all existing commands, copy scratchpad to active, copy scratchpad to startup
SSR cfgLastError	1.3.6.1.4.1.52.2501.1.231.7	SSRErrorCode	read-only	A reason code for the last transfer operation. Poll this value when doing sets against cfgMakeActive for config files obtain status.
STR cfgLastErrorReason	1.3.6.1.4.1.52.2501.1.231.8	DisplayString	read-only	A string representation of cfgLastError which may contain addtional details.
STR cfgActiveImageVersion	1.3.6.1.4.1.52.2501.1.231.9	DisplayString	read-only	The Version string of the current image executing on this control module. This is the same description as the system show version command. example: 1.1.0.0
STR cfgActiveImageBootLocation	1.3.6.1.4.1.52.2501.1.231.10	DisplayString	read-only	The URL location string from whence the current image was loaded. example: slot0:boot/ssr8.tar.gz/

RFC description

Manages SmartSwitch Router configuration files and system images including startup configuration and firmware updates.

Start monitoring Cabletron/Enterasys SmartSwitch Router with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CTRON-SSR-CONFIG-MIB

What Is CTRON-SSR-CONFIG-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description