CTRON-SFPS-ESYS-MIB

All MIBs › CTRON-SFPS-ESYS-MIB

Category: Vendor: Cabletron/Enterasys

Description: Manages Cabletron SFPS ESYS (external system) interface for integration with external network management.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CTRON-SFPS-ESYS-MIB?

CTRON-SFPS-ESYS-MIB is a Cabletron SecureFast Packet Switching (SFPS) MIB managing the ESYS (external system) interface used to integrate SFPS switches with external network management systems. It exposes a per-switch-instance system configuration table (sfpsSysConfigTable/Entry) with objects for admin status/reset, operational status and uptime, last-change timestamp, and version/MIB revision information (sfpsSysConfigAdminStatus, sfpsSysConfigAdminReset, sfpsSysConfigOperStatus, sfpsSysConfigOperTime, sfpsSysConfigLastChange, sfpsSysConfigVersion, sfpsSysConfigMIBRev). Its monitoring value directly covers device software/hardware status - operational state, uptime (sfpsSysConfigOperTime), software/MIB version, and the ability to trigger an administrative reset - making it a core system-health MIB for the SFPS switch instance. As part of the Cabletron SFPS family it shares the switch-instance model used across other SFPS MIBs (bindery, eventlog, mcast, port). It is deployed on Cabletron SecureFast switches, giving external NMS platforms a system-level integration and status point. Network engineers evaluating or troubleshooting this functionality can download the CTRON-SFPS-ESYS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CTRON-SFPS-ESYS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cabletron SecureFast Packet Switching (SFPS) switch

Monitoring Examples

An admin would poll sfpsSysConfigOperStatus and sfpsSysConfigOperTime for a given sfpsSysConfigSwitchInstance to confirm the switch instance is up and see how long it has been running since its last reset. sfpsSysConfigVersion and sfpsSysConfigMIBRev would be checked to verify all switches in a SecureFast fabric run consistent software/MIB versions before a fleet-wide change. sfpsSysConfigLastChange helps flag an instance that recently transitioned state or was reconfigured; sfpsSysConfigAdminReset provides a remote reset control if a hung instance is detected.

What Can Be Monitored

system operational status
system uptime
software/MIB version
last configuration change time
administrative reset control

Imported Objects

From CTRON-SFPS-INCLUDE-MIB

sfpsATMAnibIfoStats	OBJECT-IDENTITY
sfpsATMElan	OBJECT-IDENTITY
sfpsATMPorts	OBJECT-IDENTITY
sfpsATMPortsMgr	OBJECT-IDENTITY
sfpsATMResolver	OBJECT-IDENTITY
sfpsATMResolverCounters	OBJECT-IDENTITY
sfpsATMSvcHistoryEvent	OBJECT-IDENTITY
sfpsATMSvcHistoryMgr	OBJECT-IDENTITY
sfpsMemHeapStats	OBJECT-IDENTITY
sfpsSystemConfig	OBJECT-IDENTITY
sfpsSystemPool	OBJECT-IDENTITY
sfpsSystemStats	OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
IpAddress
TimeTicks

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
sfpsSysConfigTable	1.3.6.1.4.1.52.4.2.4.2.1.1.1.1		not-accessible	This table contains the configuration and aministrative information of each SFPS instance. Essentially, a separate SFPS instance exists for each switch module. If SFPS is not configured on a module, than an entry will not exist.
sfpsSysConfigEntry	1.3.6.1.4.1.52.4.2.4.2.1.1.1.1.1		not-accessible	Each entry specifies the SFPS configuration for the SFPS instance.
INT sfpsSysConfigSwitchInstance	1.3.6.1.4.1.52.4.2.4.2.1.1.1.1.1.1	INTEGER	read-only	Switch Identifier to designate the instance of this entry.
INT sfpsSysConfigAdminStatus	1.3.6.1.4.1.52.4.2.4.2.1.1.1.1.1.2	INTEGER	read-write	The administrative status of the switch.
INT sfpsSysConfigAdminReset	1.3.6.1.4.1.52.4.2.4.2.1.1.1.1.1.3	INTEGER	read-write	Setting reset will cause a soft reset of the switch.
INT sfpsSysConfigOperStatus	1.3.6.1.4.1.52.4.2.4.2.1.1.1.1.1.4	INTEGER	read-only	Displays the operational status of the switch.
TIK sfpsSysConfigOperTime	1.3.6.1.4.1.52.4.2.4.2.1.1.1.1.1.5	TimeTicks	read-only	Displays the operation uptime of the switch.
TIK sfpsSysConfigLastChange	1.3.6.1.4.1.52.4.2.4.2.1.1.1.1.1.6	TimeTicks	read-only	Displays the number of time ticks since the last operational status change.
STR sfpsSysConfigVersion	1.3.6.1.4.1.52.4.2.4.2.1.1.1.1.1.7	DisplayString	read-only	Displays the version of this image.
STR sfpsSysConfigMIBRev	1.3.6.1.4.1.52.4.2.4.2.1.1.1.1.1.8	DisplayString	read-only	Displays the MIB version of the Engine component.
INT sfpsSysConfigHostMgmtPort	1.3.6.1.4.1.52.4.2.4.2.1.1.1.1.1.9	INTEGER	read-write	Displays the Host Management port.
INT sfpsSysConfigHostCtrlPort	1.3.6.1.4.1.52.4.2.4.2.1.1.1.1.1.10	INTEGER	read-only	Displays the logical port number for the Host Control Port. The Host Control Port is the port that unknown packets are sent to for call processing.
INT sfpsSysConfigHostDataPort	1.3.6.1.4.1.52.4.2.4.2.1.1.1.1.1.11	INTEGER	read-only
INT sfpsSysConfigHostCtrlThrottleCount	1.3.6.1.4.1.52.4.2.4.2.1.1.1.1.1.12	INTEGER	read-only
INT sfpsSysConfigHostDataThrottleCount	1.3.6.1.4.1.52.4.2.4.2.1.1.1.1.1.13	INTEGER	read-only
INT sfpsSysConfigTrunkSwitch	1.3.6.1.4.1.52.4.2.4.2.1.1.1.1.1.14	INTEGER	read-write
INT sfpsSysConfigSwitchMode	1.3.6.1.4.1.52.4.2.4.2.1.1.1.1.1.20	INTEGER	read-write	Displays the mode that the switch is running.
ADR sfpsSysConfigSwitchMAC	1.3.6.1.4.1.52.4.2.4.2.1.1.1.1.1.21	SfpsAddress	read-only	Displays the Switch's Base MAC address.
INT sfpsSysConfigMgmtAccessType	1.3.6.1.4.1.52.4.2.4.2.1.1.1.1.1.22	INTEGER	read-write	Determines whether the port can be used for management only or to be also used as an Access port.
ADR sfpsSysConfigChassisMAC	1.3.6.1.4.1.52.4.2.4.2.1.1.1.1.1.23	SfpsAddress	read-only
IP sfpsSysConfigChassisIP	1.3.6.1.4.1.52.4.2.4.2.1.1.1.1.1.24	IpAddress	read-only
sfpsSysStatsTable	1.3.6.1.4.1.52.4.2.4.2.1.1.2.1		not-accessible	This table contains the statistics information fo each SFPS switch instance. Essentially, a separate SFPS instance exists for each switch module. If SFPS is not configured on a module, than an entry will not exist.
sfpsSysStatsEntry	1.3.6.1.4.1.52.4.2.4.2.1.1.2.1.1		not-accessible	Each entry contains the SFPS statistics for the SFPS instance.
SFP sfpsSysStatsSwitchInstance	1.3.6.1.4.1.52.4.2.4.2.1.1.2.1.1.1	SfpsSwitchInstance	read-only	The primary index to the SFPS switch table. This identifies the SFPS switch for which the entry exists.
INT sfpsSysStatsAdminStatus	1.3.6.1.4.1.52.4.2.4.2.1.1.2.1.1.2	INTEGER	read-write	Sets the administrative state of the SFPS switch statistics. Writing a value of enabled(3) causes these counters to become active for this SFPS switch instance. Writing a value of disabled(2) causes these counters to become inactive for this SFPS switch instance.
INT sfpsSysStatsReset	1.3.6.1.4.1.52.4.2.4.2.1.1.2.1.1.3	INTEGER	read-write	Resets the SFPS switch counters for this SFPS switch instance. Writing a value of reset(2) resets the SFPS switch counters to 0 and causes sfpsSysStatsOperTime to also be reset to 0.
TIK sfpsSysStatsOperTime	1.3.6.1.4.1.52.4.2.4.2.1.1.2.1.1.4	TimeTicks	read-only	Indicates the amount of time (# of time ticks) that the SFPS switch statistics have been active for this SFPS swtich instance.
CTR sfpsSysStatsInPkts	1.3.6.1.4.1.52.4.2.4.2.1.1.2.1.1.5	Counter	read-only	Indicates the total number of SFPS packets that have been received, on this SFPS switch instance, during the time of sfpsSysStatsOperTime.
CTR sfpsSysStatsOutPkts	1.3.6.1.4.1.52.4.2.4.2.1.1.2.1.1.6	Counter	read-only	Indicates the total number of SFPS packets that have been switched, on this SFPS switch instance, during the time of sfpsSysStatsOperTime.
CTR sfpsSysStatsDiscardPkts	1.3.6.1.4.1.52.4.2.4.2.1.1.2.1.1.7	Counter	read-only	Indicates the total number of SFPS packets that have been discarded, on this SFPS switch instance, during the time of sfpsSysStatsOperTime.
CTR sfpsSysStatsFilteredPkts	1.3.6.1.4.1.52.4.2.4.2.1.1.2.1.1.8	Counter	read-only	Indicates the total number of SFPS packets that have been filtered, on this SFPS switch instance, during the time of sfpsSysStatsOperTime.
CTR sfpsSysStatsInOctets	1.3.6.1.4.1.52.4.2.4.2.1.1.2.1.1.9	Counter	read-only	Indicates the total number of SFPS octets that have been received, on this SFPS switch instance, during the time of sfpsSysStatsOperTime.
CTR sfpsSysStatsOutOctets	1.3.6.1.4.1.52.4.2.4.2.1.1.2.1.1.10	Counter	read-only	Indicates the total number of SFPS octets that have been switched, on this SFPS switch instance, during the time of sfpsSysStatsOperTime.
CTR sfpsSysStatsDiscardOctets	1.3.6.1.4.1.52.4.2.4.2.1.1.2.1.1.11	Counter	read-only	Indicates the total number of SFPS octets that have been discarded, on this SFPS switch instance, during the time of sfpsSysStatsOperTime.
CTR sfpsSysStatsFilteredOctets	1.3.6.1.4.1.52.4.2.4.2.1.1.2.1.1.12	Counter	read-only	Indicates the total number of SFPS octets that have been filtered, on this SFPS switch instance, during the time of sfpsSysStatsOperTime.
NUM sfpsMemHeapStatsHeapInit	1.3.6.1.4.1.52.4.2.4.2.1.1.2.2.1.1	HexInteger	read-only
NUM sfpsMemHeapStatsHeapMax	1.3.6.1.4.1.52.4.2.4.2.1.1.2.2.1.2	HexInteger	read-only
NUM sfpsMemHeapStatsHeapEnd	1.3.6.1.4.1.52.4.2.4.2.1.1.2.2.1.3	HexInteger	read-only
INT sfpsMemHeapStatsHeapSize	1.3.6.1.4.1.52.4.2.4.2.1.1.2.2.1.4	INTEGER	read-only
INT sfpsMemHeapStatsFragCount	1.3.6.1.4.1.52.4.2.4.2.1.1.2.2.1.5	INTEGER	read-only
INT sfpsMemHeapStatsFragLargest	1.3.6.1.4.1.52.4.2.4.2.1.1.2.2.1.6	INTEGER	read-only
INT sfpsMemHeapStatsFragBytes	1.3.6.1.4.1.52.4.2.4.2.1.1.2.2.1.7	INTEGER	read-only
INT sfpsMemHeapStatsHeapUsed	1.3.6.1.4.1.52.4.2.4.2.1.1.2.2.1.8	INTEGER	read-only
INT sfpsMemHeapStatsHeapAvail	1.3.6.1.4.1.52.4.2.4.2.1.1.2.2.1.9	INTEGER	read-only
OCT sfpsMemHeapStatsHeapUseMax	1.3.6.1.4.1.52.4.2.4.2.1.1.2.2.1.10	OCTET STRING	read-only
OCT sfpsMemHeapStatsHeapUsePercent	1.3.6.1.4.1.52.4.2.4.2.1.1.2.2.1.11	OCTET STRING	read-only
sfpsPoolTable	1.3.6.1.4.1.52.4.2.4.2.1.1.4.1		not-accessible
sfpsPoolTableEntry	1.3.6.1.4.1.52.4.2.4.2.1.1.4.1.1		not-accessible
INT sfpsPoolTableIndex	1.3.6.1.4.1.52.4.2.4.2.1.1.4.1.1.1	INTEGER	read-only
STR sfpsPoolTableName	1.3.6.1.4.1.52.4.2.4.2.1.1.4.1.1.2	DisplayString	read-only
INT sfpsPoolTableRAM	1.3.6.1.4.1.52.4.2.4.2.1.1.4.1.1.3	INTEGER	read-only
INT sfpsPoolTableBlockSize	1.3.6.1.4.1.52.4.2.4.2.1.1.4.1.1.4	INTEGER	read-only
INT sfpsPoolTableBlockCount	1.3.6.1.4.1.52.4.2.4.2.1.1.4.1.1.5	INTEGER	read-only
INT sfpsPoolTableBlockMax	1.3.6.1.4.1.52.4.2.4.2.1.1.4.1.1.6	INTEGER	read-only
INT sfpsPoolTableObjSize	1.3.6.1.4.1.52.4.2.4.2.1.1.4.1.1.7	INTEGER	read-only
INT sfpsPoolTableObjInUse	1.3.6.1.4.1.52.4.2.4.2.1.1.4.1.1.8	INTEGER	read-only
INT sfpsPoolTableObjMax	1.3.6.1.4.1.52.4.2.4.2.1.1.4.1.1.9	INTEGER	read-only
INT sfpsPoolTableObjInBlock	1.3.6.1.4.1.52.4.2.4.2.1.1.4.1.1.10	INTEGER	read-only
sfpsVccPortTable	1.3.6.1.4.1.52.4.2.4.2.4.1.6		not-accessible
sfpsVccPortEntry	1.3.6.1.4.1.52.4.2.4.2.4.1.6.1		not-accessible
INT sfpsVccPortLogPort	1.3.6.1.4.1.52.4.2.4.2.4.1.6.1.1	INTEGER	read-only
INT sfpsVccPortPhyPort	1.3.6.1.4.1.52.4.2.4.2.4.1.6.1.2	INTEGER	read-only
INT sfpsVccPortVpi	1.3.6.1.4.1.52.4.2.4.2.4.1.6.1.3	INTEGER	read-only
INT sfpsVccPortVci	1.3.6.1.4.1.52.4.2.4.2.4.1.6.1.4	INTEGER	read-only
INT sfpsVccPortPortType	1.3.6.1.4.1.52.4.2.4.2.4.1.6.1.5	INTEGER	read-only
INT sfpsVccPortLogPortType	1.3.6.1.4.1.52.4.2.4.2.4.1.6.1.6	INTEGER	read-only
INT sfpsVccPortPhyLinkState	1.3.6.1.4.1.52.4.2.4.2.4.1.6.1.7	INTEGER	read-only
sfpsATMLecPortTable	1.3.6.1.4.1.52.4.2.4.2.4.1.7		not-accessible
sfpsATMLecPortTableEntry	1.3.6.1.4.1.52.4.2.4.2.4.1.7.1		not-accessible
INT sfpsATMLecPortLogPort	1.3.6.1.4.1.52.4.2.4.2.4.1.7.1.1	INTEGER	read-only
INT sfpsATMLecPortPhyPort	1.3.6.1.4.1.52.4.2.4.2.4.1.7.1.2	INTEGER	read-only
INT sfpsATMLecPortElanName	1.3.6.1.4.1.52.4.2.4.2.4.1.7.1.3	INTEGER	read-only
INT sfpsATMLecPortPhyLinkState	1.3.6.1.4.1.52.4.2.4.2.4.1.7.1.4	INTEGER	read-only
INT sfpsATMLecPortLECType	1.3.6.1.4.1.52.4.2.4.2.4.1.7.1.5	INTEGER	read-only
INT sfpsATMResolveSystemLearnTableSize	1.3.6.1.4.1.52.4.2.4.2.4.3.1	INTEGER	read-write
INT sfpsATMResolveCountersVerb	1.3.6.1.4.1.52.4.2.4.2.4.3.2.1	INTEGER	read-only
INT sfpsATMResolveCountersUptime	1.3.6.1.4.1.52.4.2.4.2.4.3.2.2	INTEGER	read-only
INT sfpsATMResolveCountersQueryMACReq	1.3.6.1.4.1.52.4.2.4.2.4.3.2.3	INTEGER	read-only
INT sfpsATMResolveCountersQueryMACFail	1.3.6.1.4.1.52.4.2.4.2.4.3.2.4	INTEGER	read-only
INT sfpsATMResolveCountersQueryMACGood	1.3.6.1.4.1.52.4.2.4.2.4.3.2.5	INTEGER	read-only
INT sfpsATMResolveCountersQueryMACDaSaChecks	1.3.6.1.4.1.52.4.2.4.2.4.3.2.6	INTEGER	read-only
INT sfpsATMResolveCountersQueryMACDaSaHits	1.3.6.1.4.1.52.4.2.4.2.4.3.2.7	INTEGER	read-only
INT sfpsATMResolveCountersQueryMACDaSaMissess	1.3.6.1.4.1.52.4.2.4.2.4.3.2.8	INTEGER	read-only
INT sfpsATMResolveCountersQueryMACVdirChecks	1.3.6.1.4.1.52.4.2.4.2.4.3.2.9	INTEGER	read-only
INT sfpsATMResolveCountersQueryMACVdirHits	1.3.6.1.4.1.52.4.2.4.2.4.3.2.10	INTEGER	read-only
INT sfpsATMResolveCountersQueryMACVdirMisses	1.3.6.1.4.1.52.4.2.4.2.4.3.2.11	INTEGER	read-only
INT sfpsATMResolveCountersQueryMACErrors	1.3.6.1.4.1.52.4.2.4.2.4.3.2.12	INTEGER	read-only
INT sfpsATMResolveCountersQueryMACLecPortSuppress	1.3.6.1.4.1.52.4.2.4.2.4.3.2.13	INTEGER	read-only
INT sfpsATMResolveCountersQueryMACStandbyDrops	1.3.6.1.4.1.52.4.2.4.2.4.3.2.14	INTEGER	read-only
INT sfpsATMResolveCountersQueryDaSaRequests	1.3.6.1.4.1.52.4.2.4.2.4.3.2.15	INTEGER	read-only
INT sfpsATMResolveCountersQueryDaSaHits	1.3.6.1.4.1.52.4.2.4.2.4.3.2.16	INTEGER	read-only
INT sfpsATMResolveCountersQueryDaSaMisses	1.3.6.1.4.1.52.4.2.4.2.4.3.2.17	INTEGER	read-only
INT sfpsATMResolveCountersQueryDaSaErrors	1.3.6.1.4.1.52.4.2.4.2.4.3.2.18	INTEGER	read-only
INT sfpsATMResolveDiagAPIVerb	1.3.6.1.4.1.52.4.2.4.2.4.3.3	INTEGER	read-write
INT sfpsATMResolveDiagAPIInDA	1.3.6.1.4.1.52.4.2.4.2.4.3.8	INTEGER	read-write
INT sfpsATMResolveDiagAPIInSA	1.3.6.1.4.1.52.4.2.4.2.4.3.9	INTEGER	read-write
INT sfpsATMResolveDiagAPIInSrcLecPort	1.3.6.1.4.1.52.4.2.4.2.4.3.10	INTEGER	read-write
INT sfpsATMResolveDiagAPIOutStatus	1.3.6.1.4.1.52.4.2.4.2.4.3.11	INTEGER	read-only
INT sfpsATMResolveDiagAPIOutPort	1.3.6.1.4.1.52.4.2.4.2.4.3.12	INTEGER	read-only
sfpsAnibIfoStatsTable	1.3.6.1.4.1.52.4.2.4.2.4.4.1		not-accessible
sfpsAnibIfoStatsTableEntry	1.3.6.1.4.1.52.4.2.4.2.4.4.1.1		not-accessible
INT sfpsAnibIfoStatsPhysIntf	1.3.6.1.4.1.52.4.2.4.2.4.4.1.1.1	INTEGER	read-only
INT sfpsAnibIfoStatsCtrlMessages	1.3.6.1.4.1.52.4.2.4.2.4.4.1.1.2	INTEGER	read-only
INT sfpsAnibIfoStatsIlmiMessages	1.3.6.1.4.1.52.4.2.4.2.4.4.1.1.3	INTEGER	read-only
INT sfpsAnibIfoStatsUniMessages	1.3.6.1.4.1.52.4.2.4.2.4.4.1.1.4	INTEGER	read-only
INT sfpsAnibIfoStatsLaneMessages	1.3.6.1.4.1.52.4.2.4.2.4.4.1.1.5	INTEGER	read-only
INT sfpsAnibIfoStatsPCSPoolSize	1.3.6.1.4.1.52.4.2.4.2.4.4.1.1.6	INTEGER	read-only
INT sfpsAnibIfoStatsPCSPoolDrops	1.3.6.1.4.1.52.4.2.4.2.4.4.1.1.7	INTEGER	read-only
INT sfpsAnibIfoStatsPoolIlmiDrops	1.3.6.1.4.1.52.4.2.4.2.4.4.1.1.8	INTEGER	read-only
INT sfpsAnibIfoStatsPoolUniDrops	1.3.6.1.4.1.52.4.2.4.2.4.4.1.1.9	INTEGER	read-only
INT sfpsAnibIfoStatsPCSAvail	1.3.6.1.4.1.52.4.2.4.2.4.4.1.1.11	INTEGER	read-only
INT sfpsAnibIfoStatsPCSInUse	1.3.6.1.4.1.52.4.2.4.2.4.4.1.1.12	INTEGER	read-only
INT sfpsAnibIfoStatsStandbyLeArpsDrops	1.3.6.1.4.1.52.4.2.4.2.4.4.1.1.13	INTEGER	read-only
INT sfpsAnibIfoStatsStandbyUnknownsDrops	1.3.6.1.4.1.52.4.2.4.2.4.4.1.1.14	INTEGER	read-only
INT sfpsAnibIfoStatsStandbyANIBUnknownsDrops	1.3.6.1.4.1.52.4.2.4.2.4.4.1.1.15	INTEGER	read-only
INT sfpsAnibIfoStatsPoolLaneDrops	1.3.6.1.4.1.52.4.2.4.2.4.4.1.1.19	INTEGER	read-only
sfpsATMPortsTable	1.3.6.1.4.1.52.4.2.4.2.4.5.1		not-accessible
sfpsATMPortsTableEntry	1.3.6.1.4.1.52.4.2.4.2.4.5.1.1		not-accessible
INT sfpsATMPortsPhysIntf	1.3.6.1.4.1.52.4.2.4.2.4.5.1.1.1	INTEGER	read-only
INT sfpsATMPortsTotalLECPorts	1.3.6.1.4.1.52.4.2.4.2.4.5.1.1.2	INTEGER	read-only
INT sfpsATMPortsTotalPVCPorts	1.3.6.1.4.1.52.4.2.4.2.4.5.1.1.3	INTEGER	read-only
INT sfpsATMPortsTotalSVCPorts	1.3.6.1.4.1.52.4.2.4.2.4.5.1.1.4	INTEGER	read-only
INT sfpsATMPortsBaseIntfNum	1.3.6.1.4.1.52.4.2.4.2.4.5.1.1.5	INTEGER	read-only
INT sfpsATMPortsInUse	1.3.6.1.4.1.52.4.2.4.2.4.5.1.1.6	INTEGER	read-only
INT sfpsATMPortsMgrVerb	1.3.6.1.4.1.52.4.2.4.2.4.5.2.1	INTEGER	read-write
INT sfpsATMPortsMgrPhysIntf	1.3.6.1.4.1.52.4.2.4.2.4.5.2.2	INTEGER	read-write
INT sfpsATMPortsMgrTotalLECPorts	1.3.6.1.4.1.52.4.2.4.2.4.5.2.3	INTEGER	read-write
INT sfpsATMPortsMgrTotalPVCPorts	1.3.6.1.4.1.52.4.2.4.2.4.5.2.4	INTEGER	read-write
INT sfpsATMPortsMgrTotalSVCPorts	1.3.6.1.4.1.52.4.2.4.2.4.5.2.5	INTEGER	read-write
INT sfpsATMPortsMgrVerbStatus	1.3.6.1.4.1.52.4.2.4.2.4.5.2.6	INTEGER	read-write
INT sfpsATMSvcHistoryMgrVerb	1.3.6.1.4.1.52.4.2.4.2.4.8.1.1	INTEGER	read-write	allows you to reset the SvcHistoryEvent table disable logging so no new entries are compiled in the SvcHistoryEvent table enable logging so new entries are added to the SvcHistoryEvent table enable logging in the SvcHistoryEvent table so that when the max number of entries is reached the table is full and doesn't wrap around and continue adding entries
INT sfpsATMSvcHistoryMgrSvcHistoryWraps	1.3.6.1.4.1.52.4.2.4.2.4.8.1.2	INTEGER	read-only	displays if the table is going to wrap
INT sfpsATMSvcHistoryMgrLogState	1.3.6.1.4.1.52.4.2.4.2.4.8.1.3	INTEGER	read-only	displays whether the table is enabled to log new entries or not and if it is enabled whether the table will wrap
INT sfpsATMSvcHistoryMgrEntriesCount	1.3.6.1.4.1.52.4.2.4.2.4.8.1.4	INTEGER	read-only	displays the number of current entries from the beginnning of the table (not from before it wrapped)
sfpsATMSvcHistoryEventTable	1.3.6.1.4.1.52.4.2.4.2.4.8.2.1		not-accessible
sfpsATMSvcHistoryEventTableEntry	1.3.6.1.4.1.52.4.2.4.2.4.8.2.1.1		not-accessible
INT sfpsATMSvcHistoryEventIndex	1.3.6.1.4.1.52.4.2.4.2.4.8.2.1.1.1	INTEGER	read-only	incrementing value based on number of events
OCT sfpsATMSvcHistoryEventATMAddr	1.3.6.1.4.1.52.4.2.4.2.4.8.2.1.1.2	OCTET STRING	read-only	the atm address for the port manager port based on the lec client mib.
INT sfpsATMSvcHistoryEventPortNumber	1.3.6.1.4.1.52.4.2.4.2.4.8.2.1.1.3	INTEGER	read-only	port manager port
INT sfpsATMSvcHistoryEventEvent	1.3.6.1.4.1.52.4.2.4.2.4.8.2.1.1.4	INTEGER	read-only	state change logged to the Event Log
INT sfpsATMSvcHistoryEventEventChange	1.3.6.1.4.1.52.4.2.4.2.4.8.2.1.1.5	INTEGER	read-only	reason for the Event
INT sfpsATMSvcHistoryEventVccHand	1.3.6.1.4.1.52.4.2.4.2.4.8.2.1.1.6	INTEGER	read-only	value associated with a connection on Port Number
INT sfpsATMSvcHistoryEventVpi	1.3.6.1.4.1.52.4.2.4.2.4.8.2.1.1.7	INTEGER	read-only	vpi associated with connection on Port Number
INT sfpsATMSvcHistoryEventVci	1.3.6.1.4.1.52.4.2.4.2.4.8.2.1.1.8	INTEGER	read-only	vci associated with connection on Port Number
TIK sfpsATMSvcHistoryEventTime	1.3.6.1.4.1.52.4.2.4.2.4.8.2.1.1.9	TimeTicks	read-only	system time when Event occurs

RFC description

Cabletron Systems (Ctron) vendor-specific MIB for Secure Fast Packet Switching (SFPS) extended system management on Cabletron switches.

Start monitoring Cabletron SecureFast Packet Switch (SFPS), external system integration with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CTRON-SFPS-ESYS-MIB

What Is CTRON-SFPS-ESYS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description