CPQIODRV-MIB

All MIBs › CPQIODRV-MIB

Category: Vendor: HP/HPE

Description: Manages Compaq/HP I/O driver and host bus adapter status for server peripheral connectivity.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CPQIODRV-MIB?

The CPQIODRV-MIB is a Compaq (later HP/HPE) proprietary MIB module for managing the I/O driver and host bus adapter (HBA) layer on Compaq/HP ProLiant servers, part of the Compaq Insight Manager (CIM) agent family. It exposes data about I/O driver components, host bus adapters, and their capacity/configuration attributes as visible to the operating system driver stack. It is chiefly used to monitor the hardware status of storage connectivity components in a server, verifying that I/O drivers are loaded correctly, tracking adapter revision/capacity information, and detecting driver-level faults that could indicate a failing HBA or misconfigured storage path. As a CPQ-family MIB it depends on the broader Compaq/HP enterprise MIB tree and typically requires the Compaq/HP Insight Management Agent to be installed alongside standard MIB-II. It is deployed on Compaq/HP ProLiant rack and tower servers, where CPQIODRV-MIB SNMP monitoring gives visibility into I/O subsystem health that isn't exposed by generic OS or SNMP MIBs.

IPNetwork Monitor allows you to monitor SNMP objects defined in CPQIODRV-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Compaq/HP ProLiant server
host bus adapter (HBA)

Monitoring Examples

An administrator polling cpqIoDrvComponent and cpqIoDrvInfo can enumerate each registered I/O driver component and inspect cpqIoDrvCapacity and cpqIoDrvMibRev to confirm the driver version and reported capacity match expectations for the installed HBA. Watching cpqIoDrvInfoBeacon lets a monitoring tool detect when the agent flags a beacon/identify condition on a component, useful for locating a specific card in a chassis during maintenance. If cpqIoDrvExtn attributes disappear or fail to update, it can signal a driver crash or unresponsive HBA that would otherwise go unnoticed until a storage timeout occurs.

What Can Be Monitored

I/O driver component status
host bus adapter capacity
driver MIB revision
component beacon/identify state

Imported Objects

From CPQHOST-MIB

compaq	OBJECT-IDENTITY
cpqHoTrapFlags	OBJECT-TYPE

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter

From RFC1213-MIB

DisplayString
sysName

OIDs

OID symbolic	OID numeric	Type	Access	Description
NTF cpqIoDrvWearoutTrap	1.3.6.1.4.1.232.0.172001			IO Drive begins to wear out. This trap signifies that the agent has detected a wear out of IO Drive configured with your system.
NTF cpqIoDrvNonWritableTrap	1.3.6.1.4.1.232.0.172002			IO Drive is not writeable due to excessive wear This trap signifies that IO Drive configured with system is not writeable due to excessive wear. User Action: Replace the existing IO Drive to make it writable.
NTF cpqIoDrvFlashbackTrap	1.3.6.1.4.1.232.0.172003			IO Drive flashback protection becomes degraded This trap signifies that IO Drive flashback protection configured with system is degraded.
NTF cpqIoDrvTempHighTrap	1.3.6.1.4.1.232.0.172004			Temperature sensor of IO Drive surpasses the threshold. This trap signifies that the temperature sensor of IO Drive configured with system surpasses the threshold configured.
NTF cpqIoDrvTempOkTrap	1.3.6.1.4.1.232.0.172005			Temperature sensor of IO Drive set below threshold. This trap signifies that the temperature sensor of IO Drive configured with system surpasses the threshold configured.
NTF cpqIoDrvErrorTrap	1.3.6.1.4.1.232.0.172006			IO Drive is in an error state.
cpqIoDrv	1.3.6.1.4.1.232.172
cpqIoDrvMibRev	1.3.6.1.4.1.232.172.1
INT cpqIoDrvMibRevMajor	1.3.6.1.4.1.232.172.1.1	INTEGER	read-only	Major MIB revision. This will increment when incompatible structural changes occur.
INT cpqIoDrvMibRevMinor	1.3.6.1.4.1.232.172.1.2	INTEGER	read-only	Minor MIB revision. This will increment when minor additions occur.
INT cpqIoDrvMibCondition	1.3.6.1.4.1.232.172.1.3	INTEGER	read-only	The overall condition (status) of the system represented by this MIB.
cpqIoDrvComponent	1.3.6.1.4.1.232.172.2
cpqIoDrvInfo	1.3.6.1.4.1.232.172.2.1
cpqIoDrvInfoTable	1.3.6.1.4.1.232.172.2.1.1		not-accessible	There will be an entry in this table for each IO Drive installed.
cpqIoDrvInfoEntry	1.3.6.1.4.1.232.172.2.1.1.1		not-accessible	Each entry represents an IO Drive device in system.
INT cpqIoDrvInfoIndex	1.3.6.1.4.1.232.172.2.1.1.1.1	INTEGER	read-only	Unique number index for each IO Drive entries.
INT cpqIoDrvInfoStatus	1.3.6.1.4.1.232.172.2.1.1.1.2	INTEGER	read-only	The overall status of the unique IO Drive device.
STR cpqIoDrvInfoName	1.3.6.1.4.1.232.172.2.1.1.1.3	DisplayString	read-write	System control device name for this IO Drive.
STR cpqIoDrvInfoSerialNumber	1.3.6.1.4.1.232.172.2.1.1.1.4	DisplayString	read-only	IO Drive serial number.
STR cpqIoDrvInfoPartNumber	1.3.6.1.4.1.232.172.2.1.1.1.5	DisplayString	read-only	IO Drive part number.
STR cpqIoDrvInfoSubVendorPartNumber	1.3.6.1.4.1.232.172.2.1.1.1.6	DisplayString	read-only	Sub-vendor system part number of this device.
STR cpqIoDrvInfoSparesPartNumber	1.3.6.1.4.1.232.172.2.1.1.1.7	DisplayString	read-only	The spares part number of this IO Drive.
STR cpqIoDrvInfoAssemblyNumber	1.3.6.1.4.1.232.172.2.1.1.1.8	DisplayString	read-only	The assembly number of this IO Drive (HW revision).
STR cpqIoDrvInfoFirmwareVersion	1.3.6.1.4.1.232.172.2.1.1.1.9	DisplayString	read-only	IO Drive firmware version.
STR cpqIoDrvInfoDriverVersion	1.3.6.1.4.1.232.172.2.1.1.1.10	DisplayString	read-only	Device driver version of this IO Drive.
STR cpqIoDrvInfoUID	1.3.6.1.4.1.232.172.2.1.1.1.11	DisplayString	read-only	IO Drive UID written at format time.
INT cpqIoDrvInfoState	1.3.6.1.4.1.232.172.2.1.1.1.12	INTEGER	read-write	The current state of the attached client device. In order to function normally, the device must be in the 'attached' state. Quiescent states: attached = device is ready for normal use detached = device is stopped minimal = driver loaded but firmware needs updating error = device is not working properly Transitional states: attaching = device is initializing scanning = part of device initialization detaching = device is stopping formatting = the format operation is in process updating = the firmware is being updated Operations: attach = make device operational detach = take device off-line format = re-formats device update = firmware update Device state must be minimal or detached to update the firmware and must be detached in order format.
STR cpqIoDrvInfoClientDeviceName	1.3.6.1.4.1.232.172.2.1.1.1.13	DisplayString	read-only	The name of the attached client device.
INT cpqIoDrvInfoBeacon	1.3.6.1.4.1.232.172.2.1.1.1.14	INTEGER	read-write	Writing a true value here will turn on the LED flashing beacon for visual card identification. A false value will turn the LED beacon off.
STR cpqIoDrvInfoPCIAddress	1.3.6.1.4.1.232.172.2.1.1.1.15	DisplayString	read-only	IO Drive address on the PCI bus.
STR cpqIoDrvInfoPCIDeviceID	1.3.6.1.4.1.232.172.2.1.1.1.16	DisplayString	read-only	IO Drive PCI ID.
STR cpqIoDrvInfoPCISubdeviceID	1.3.6.1.4.1.232.172.2.1.1.1.17	DisplayString	read-only	The PCI subdevice ID of this IO Drive.
STR cpqIoDrvInfoPCIVendorID	1.3.6.1.4.1.232.172.2.1.1.1.18	DisplayString	read-only	The subvendor ID of this IO Drive.
STR cpqIoDrvInfoPCISubvendorID	1.3.6.1.4.1.232.172.2.1.1.1.19	DisplayString	read-only	The subvendor ID of this IO Drive.
INT cpqIoDrvInfoPCISlot	1.3.6.1.4.1.232.172.2.1.1.1.20	INTEGER	read-only	The PCI slot number of this IO Drive.
INT cpqIoDrvInfoWearoutIndicator	1.3.6.1.4.1.232.172.2.1.1.1.21	INTEGER	read-only	A true condition indicates that the device has surpassed the wearout threshold.
INT cpqIoDrvInfoFlashbackIndicator	1.3.6.1.4.1.232.172.2.1.1.1.22	INTEGER	read-only	A true condition indicates that flashback redundancy is degraded.
INT cpqIoDrvInfoNonWritableIndicator	1.3.6.1.4.1.232.172.2.1.1.1.23	INTEGER	read-only	A true condition indicates that the device is no longer writable because it has surpassed the read-only threshold..
INT cpqIoDrvInfoCurrentTemp	1.3.6.1.4.1.232.172.2.1.1.1.24	INTEGER	read-only	The current temperature of the device in Celsius.
INT cpqIoDrvInfoPercentLifeRemaining	1.3.6.1.4.1.232.172.2.1.1.1.25	INTEGER	read-only	An estimate of the health of the drive expressed as the remaining percentage of drive life.
STR cpqIoDrvInfoShortTermWearoutDate	1.3.6.1.4.1.232.172.2.1.1.1.26	DisplayString	read-only	The date that the drive is estimated to reach the wearout threshold based on drive usage in the short-term interval.
STR cpqIoDrvInfoLongTermWearoutDate	1.3.6.1.4.1.232.172.2.1.1.1.27	DisplayString	read-only	The date that the drive is estimated to reach the wearout threshold based on drive usage in the long-term interval.
STR cpqIoDrvInfoShortTermNonWritableDate	1.3.6.1.4.1.232.172.2.1.1.1.28	DisplayString	read-only	The date that the drive is estimated to go non-writable based on drive usage in the short-term interval.
STR cpqIoDrvInfoLongTermNonWritableDate	1.3.6.1.4.1.232.172.2.1.1.1.29	DisplayString	read-only	The date that the drive is estimated to go non-writable based on drive usage in the long-term interval.
cpqIoDrvExtn	1.3.6.1.4.1.232.172.2.2
cpqIoDrvExtnTable	1.3.6.1.4.1.232.172.2.2.1		not-accessible	This table is extension of IO Drive information.
cpqIoDrvExtnEntry	1.3.6.1.4.1.232.172.2.2.1.1		not-accessible	Addiotnal Informaiton about IO Drive will be populated in this table.
INT cpqIoDrvExtnIndex	1.3.6.1.4.1.232.172.2.2.1.1.1	INTEGER	read-only	Unique number index for each IO Drive extension entries. There will be one-one mapping between cpqIoDrvExtnIndex and cpqIoDrvInfoIndex.
CTR cpqIoDrvExtnTotalPhysicalCapacityU	1.3.6.1.4.1.232.172.2.2.1.1.2	Counter	read-only	The upper word of the total physical capacity in bytes.
CTR cpqIoDrvExtnTotalPhysicalCapacityL	1.3.6.1.4.1.232.172.2.2.1.1.3	Counter	read-only	The lower word of the total physical capacity in bytes.
CTR cpqIoDrvExtnUsablePhysicalCapacityU	1.3.6.1.4.1.232.172.2.2.1.1.4	Counter	read-only	The upper word of the usable physical capacity in bytes. This is space that is holding valid data, is erased and ready for writing or waiting to be reclaimed via garbage collection.
CTR cpqIoDrvExtnUsablePhysicalCapacityL	1.3.6.1.4.1.232.172.2.2.1.1.5	Counter	read-only	The lower word of the usable physical capacity in bytes. This is space that is holding valid data, is erased and ready for writing or waiting to be reclaimed via garbage collection.
CTR cpqIoDrvExtnUsedPhysicalCapacityU	1.3.6.1.4.1.232.172.2.2.1.1.6	Counter	read-only	The upper word used physical capacity in bytes. This is the space holding valid, current data.
CTR cpqIoDrvExtnUsedPhysicalCapacityL	1.3.6.1.4.1.232.172.2.2.1.1.7	Counter	read-only	The lower word used physical capacity in bytes. This is the space holding valid, current data.
CTR cpqIoDrvExtnTotalLogicalCapacityU	1.3.6.1.4.1.232.172.2.2.1.1.8	Counter	read-only	The upper word of the total logical capacity in bytes as formatted.
CTR cpqIoDrvExtnTotalLogicalCapacityL	1.3.6.1.4.1.232.172.2.2.1.1.9	Counter	read-only	The lower word of the total logical capacity in bytes as formatted.
CTR cpqIoDrvExtnAvailableLogicalCapacityU	1.3.6.1.4.1.232.172.2.2.1.1.10	Counter	read-only	The upper word of the available logical capacity in bytes.
CTR cpqIoDrvExtnAvailableLogicalCapacityL	1.3.6.1.4.1.232.172.2.2.1.1.11	Counter	read-only	The lower word of the available logical capacity in bytes.
CTR cpqIoDrvExtnBytesReadU	1.3.6.1.4.1.232.172.2.2.1.1.12	Counter	read-only	The upper word of the total number of bytes read since the device was formatted.
CTR cpqIoDrvExtnBytesReadL	1.3.6.1.4.1.232.172.2.2.1.1.13	Counter	read-only	The lower word of the total number of bytes read since the device was formatted.
CTR cpqIoDrvExtnPhysicalBytesWrittenU	1.3.6.1.4.1.232.172.2.2.1.1.14	Counter	read-only	The upper word of the total physical bytes written.
CTR cpqIoDrvExtnPhysicalBytesWrittenL	1.3.6.1.4.1.232.172.2.2.1.1.15	Counter	read-only	The lower word of the total physical bytes written.
CTR cpqIoDrvExtnLogicalBytesWrittenU	1.3.6.1.4.1.232.172.2.2.1.1.16	Counter	read-only	The upper word of the number of user data bytes written.
CTR cpqIoDrvExtnLogicalBytesWrittenL	1.3.6.1.4.1.232.172.2.2.1.1.17	Counter	read-only	The lower word of the number of user data bytes written.
STR cpqIoDrvExtnShortTermStartDate	1.3.6.1.4.1.232.172.2.2.1.1.18	DisplayString	read-write	The start date used to characterize short-term drive usage.
INT cpqIoDrvExtnShortTermWindow	1.3.6.1.4.1.232.172.2.2.1.1.19	INTEGER	read-write	The number of hours in the short-term usage characterization window. If this value is non-zero, then the short-term start date will automatically track with the short-term end date by the number of hours specified.
STR cpqIoDrvExtnShortTermEndDate	1.3.6.1.4.1.232.172.2.2.1.1.20	DisplayString	read-write	The end date used to characterize short-term drive usage.
INT cpqIoDrvExtnShortTermEndDateFloat	1.3.6.1.4.1.232.172.2.2.1.1.21	INTEGER	read-write	Set this variable true to automatically have the short-term end date automatically updated to the present date.
STR cpqIoDrvExtnLongTermStartDate	1.3.6.1.4.1.232.172.2.2.1.1.22	DisplayString	read-write	The start date used to characterize long-term drive usage.
INT cpqIoDrvExtnLongTermWindow	1.3.6.1.4.1.232.172.2.2.1.1.23	INTEGER	read-write	The number of hours in the long-term usage characterization window. If this value is non-zero, then the long-term start date will automatically track with the long-term end date by the number of hours specified.
STR cpqIoDrvExtnLongTermEndDate	1.3.6.1.4.1.232.172.2.2.1.1.24	DisplayString	read-write	The end date used to characterize long-term drive usage.
INT cpqIoDrvExtnLongTermEndDateFloat	1.3.6.1.4.1.232.172.2.2.1.1.25	INTEGER	read-write	Set this variable true to automatically have the long-term end date automatically updated to the present date.
INT cpqIoDrvExtnWriteRateAutoCalc	1.3.6.1.4.1.232.172.2.2.1.1.26	INTEGER	read-write	Set this true to automatically calculate the long-term and short-term average write rate based on the start and end dates selected. Otherwise, the average write rate must be set manually.
CTR cpqIoDrvExtnShortTermAvgU	1.3.6.1.4.1.232.172.2.2.1.1.27	Counter	read-write	The upper word of the short-term average write rate used to characterize drive usage. This will be automatically calculated based on short-term start and end dates if the auto calc value is true.
CTR cpqIoDrvExtnShortTermAvgL	1.3.6.1.4.1.232.172.2.2.1.1.28	Counter	read-write	The lower word of the short-term average write rate used to characterize drive usage. This will be automatically calculated based on short-term start and end dates if the auto calc value is true.
CTR cpqIoDrvExtnLongTermAvgU	1.3.6.1.4.1.232.172.2.2.1.1.29	Counter	read-write	The upper word of the long-term average write rate used to characterize drive usage. This will be automatically calculated based on long-term start and end dates if the auto calc value is true.
CTR cpqIoDrvExtnLongTermAvgL	1.3.6.1.4.1.232.172.2.2.1.1.30	Counter	read-write	The lower word of the long-term average write rate used to characterize drive usage. This will be automatically calculated based on long-term start and end dates if the auto calc value is true.
INT cpqIoDrvExtnConfidenceInterval	1.3.6.1.4.1.232.172.2.2.1.1.31	INTEGER	read-write	This defines the confidence interval used to calculate the wearout and non-writable dates. Expressed as a percentage, this value reflects the confidence in the short and long-term averages used to characterize drive usage.
cpqIoDrvCapacity	1.3.6.1.4.1.232.172.2.3
cpqIoDrvCapacityTable	1.3.6.1.4.1.232.172.2.3.1		not-accessible	This table will describe the physical capacity of IO Drive.
cpqIoDrvCapacityEntry	1.3.6.1.4.1.232.172.2.3.1.1		not-accessible	Defines an entry of the usable physical capacity table
INT cpqIoDrvCapacityInfoIndex	1.3.6.1.4.1.232.172.2.3.1.1.1	INTEGER	read-only	The ioDrive index. This correlates to the drive index in the info table.
INT cpqIoDrvCapacityIndex	1.3.6.1.4.1.232.172.2.3.1.1.2	INTEGER	read-only	Unique index for the usable physical capacity log.
CTR cpqIoDrvCapacityValueU	1.3.6.1.4.1.232.172.2.3.1.1.3	Counter	read-only	The upper word of the physical usable capacity at this point in time
CTR cpqIoDrvCapacityValueL	1.3.6.1.4.1.232.172.2.3.1.1.4	Counter	read-only	The lower word of the physical usable capacity at this point in time
STR cpqIoDrvCapacityTimestamp	1.3.6.1.4.1.232.172.2.3.1.1.5	DisplayString	read-only	The time stamp entry.
cpqIoDrvWrite	1.3.6.1.4.1.232.172.2.4
cpqIoDrvWriteTable	1.3.6.1.4.1.232.172.2.4.1		not-accessible	This table will keep the history of writes on the IO Drive
cpqIoDrvWriteEntry	1.3.6.1.4.1.232.172.2.4.1.1		not-accessible	A log of write volume history.
INT cpqIoDrvWriteInfoIndex	1.3.6.1.4.1.232.172.2.4.1.1.1	INTEGER	read-only	The ioDrive index. This correlates with the index in the info table.
INT cpqIoDrvWriteIndex	1.3.6.1.4.1.232.172.2.4.1.1.2	INTEGER	read-only	Unique index for this write volume entry.
CTR cpqIoDrvWriteValueU	1.3.6.1.4.1.232.172.2.4.1.1.3	Counter	read-only	The upper word of the total physical number of bytes written at a given moment in time.
CTR cpqIoDrvWriteValueL	1.3.6.1.4.1.232.172.2.4.1.1.4	Counter	read-only	The lower word of the total physical number of bytes written at a given moment in time.
STR cpqIoDrvWriteTimestamp	1.3.6.1.4.1.232.172.2.4.1.1.5	DisplayString	read-only	The time stamp entryfor this value.
cpqIoDrvTemp	1.3.6.1.4.1.232.172.2.5
cpqIoDrvTempTable	1.3.6.1.4.1.232.172.2.5.1		not-accessible	IO Drive temperature history table.
cpqIoDrvTempEntry	1.3.6.1.4.1.232.172.2.5.1.1		not-accessible	Log of IO Drive temperature.
INT cpqIoDrvTempInfoIndex	1.3.6.1.4.1.232.172.2.5.1.1.1	INTEGER	read-only	The device index. This correlates to the index in the info table.
INT cpqIoDrvTempIndex	1.3.6.1.4.1.232.172.2.5.1.1.2	INTEGER	read-only	Unique index for this temperature log entry.
INT cpqIoDrvTempValue	1.3.6.1.4.1.232.172.2.5.1.1.3	INTEGER	read-only	The current temperature of the device in Celsius.
CTR cpqIoDrvTempTimestamp	1.3.6.1.4.1.232.172.2.5.1.1.4	Counter	read-only	The timestamp for this entry.
cpqIoDrvProc	1.3.6.1.4.1.232.172.2.6
cpqIoDrvProcTable	1.3.6.1.4.1.232.172.2.6.1		not-accessible	A table of processes that support IO Drive operation.
cpqIoDrvProcEntry	1.3.6.1.4.1.232.172.2.6.1.1		not-accessible	Each entry represents a process in the table.
INT cpqIoDrvProcIndex	1.3.6.1.4.1.232.172.2.6.1.1.1	INTEGER	read-only	A unique index for each process.
STR cpqIoDrvProcName	1.3.6.1.4.1.232.172.2.6.1.1.2	DisplayString	read-only	The process name.
STR cpqIoDrvProcState	1.3.6.1.4.1.232.172.2.6.1.1.3	DisplayString	read-only	The process state.
CTR cpqIoDrvProcRAM	1.3.6.1.4.1.232.172.2.6.1.1.4	Counter	read-only	The bytes of RAM currently in use by the process.
INT cpqIoDrvProcCPU	1.3.6.1.4.1.232.172.2.6.1.1.5	INTEGER	read-only	The overall percentage of CPU usage.

RFC description

Monitors IO drive capacity, temperature, and performance metrics for Hewlett-Packard and Compaq storage systems.

Start monitoring Compaq/HP ProLiant servers and host bus adapters with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CPQIODRV-MIB

What Is CPQIODRV-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description