HPN-ICF-HGMP-MIB

All MIBs › HPN-ICF-HGMP-MIB

Last Updated: 2005-12-06

Category: Technology: Switching/L2, Vendor: H3C/HH3C, Vendor: HP/HPE

Description: Manages HP Group Management Protocol (HGMP) for cluster-based switch management on HP/Comware access switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPN-ICF-HGMP-MIB?

This MIB manages the HP Group Management Protocol (HGMP), a proprietary HP/H3C protocol used for cluster-based management of multiple LAN switches through a single management IP address. It belongs to the HP/Comware "lanswitch" family and exposes configuration and status data for organizing switches into administrative clusters, electing a management device, and tracking member devices. Though no sample objects were provided, HGMP MIBs of this kind typically expose cluster membership status, member device reachability/uptime, and role (management device vs. member), giving visibility into whether the switch cluster's software-level control plane is healthy. It is a vendor-proprietary HP/H3C mechanism with no direct dependency on IETF standard cluster-management MIBs. It is typically deployed across stacks of HP/Comware access-layer LAN switches managed collectively as a single logical unit. Network engineers evaluating or troubleshooting this functionality can download the HPN-ICF-HGMP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-HGMP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP/H3C Comware LAN switch (clustered)

Monitoring Examples

No sample objects were provided for this MIB, and the module description gives only a high-level statement that it manages "hpnicfhgmp operations" on lanswitch products, so a concrete object-level monitoring scenario cannot be honestly constructed from the available information.

Imported Objects

From HPN-ICF-OID-MIB

hpnicfRhw

OBJECT-IDENTITY

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpnicfHgmp	1.3.6.1.4.1.11.2.14.11.15.8.7			This MIB contains objects to manage the hpnicfhgmp operations, which are used on lanswitch products.
hpnicfClusterObject	1.3.6.1.4.1.11.2.14.11.15.8.7.1			This MIB contains objects to manage the cluster operations, which are used on lanswitch products.
hpnicfhgmpEventsV2	1.3.6.1.4.1.11.2.14.11.15.8.7.1.0			Definition point for cluster notifications.
NTF hpnicfhgmpMemberfailure	1.3.6.1.4.1.11.2.14.11.15.8.7.1.0.1			When a cluster member failure, send a snmp trap to the network management.
NTF hpnicfhgmpMemberRecover	1.3.6.1.4.1.11.2.14.11.15.8.7.1.0.2			When a cluster member recover, send a snmp trap to the network management.
NTF hpnicfhgmpMemberStatusChange	1.3.6.1.4.1.11.2.14.11.15.8.7.1.0.3			When a cluster member status change, send a snmp trap to the network management.
NTF hpnicfhgmpNetTopChange	1.3.6.1.4.1.11.2.14.11.15.8.7.1.0.4			When net topology of this cluster change, send a snmp trap to the network management.
INT hpnicfhgmpSetVLANSecurity	1.3.6.1.4.1.11.2.14.11.15.8.7.1.1	INTEGER	read-write	Configure whether to perform the VLAN check inside the cluster.
I32 hpnicfhgmpHandShakeInterval	1.3.6.1.4.1.11.2.14.11.15.8.7.1.2	Integer32	read-write	Handshaking interval of the cluster member switches.
I32 hpnicfhgmpHandShakeHoldtime	1.3.6.1.4.1.11.2.14.11.15.8.7.1.3	Integer32	read-write	Holdtime of administrator switch and member switch in the cluster.
I32 hpnicfhgmpGrpMemberTableChange	1.3.6.1.4.1.11.2.14.11.15.8.7.1.4	Integer32	read-only	Add 1 to the member list after it changes. The administrator checks if the value has changed. If not, he will not read the list once more.
I32 hpnicfhgmpMemberDisconRate	1.3.6.1.4.1.11.2.14.11.15.8.7.1.5	Integer32	read-only	Disconnection times of the member and administrator switches divided by member number times 1000.
INT hpnicfhgmpCmdLanswitchFlag	1.3.6.1.4.1.11.2.14.11.15.8.7.1.6	INTEGER	read-write	Administrator switch flag
OCT hpnicfhgmpCmdClusterName	1.3.6.1.4.1.11.2.14.11.15.8.7.1.7	OCTET STRING	read-write	Cluster name of the administrator switch
IP hpnicfhgmpMngPriIpSegCMIP	1.3.6.1.4.1.11.2.14.11.15.8.7.1.8	IpAddress	read-write	The private management IP address of the administrator switch, which can not be modified after the cluster has been created.
IP hpnicfhgmpMngPriIpMask	1.3.6.1.4.1.11.2.14.11.15.8.7.1.9	IpAddress	read-write	The private management IP address mask assigned by the administrator switch, which cannot be modified after the cluster has been created.
IP hpnicfhgmpFtpServer	1.3.6.1.4.1.11.2.14.11.15.8.7.1.10	IpAddress	read-write	The cluster members can access the Ftp Server through the administrator switch, which can only be configured and accessed on the administrator switch.
IP hpnicfhgmpTftpServer	1.3.6.1.4.1.11.2.14.11.15.8.7.1.11	IpAddress	read-write	The cluster members can access the Tftp Server through the administrator switch, which can only be configured and accessed on the administrator switch.
IP hpnicfhgmpSnmpHost	1.3.6.1.4.1.11.2.14.11.15.8.7.1.12	IpAddress	read-write	The Snmp Host to send the cluster trap packets, which can only be configured and accessed on the administrator switch.
IP hpnicfhgmpLogHost	1.3.6.1.4.1.11.2.14.11.15.8.7.1.13	IpAddress	read-write	Log host of the cluster, which can only be configured and accessed on the administrator switch.
hpnicfhgmpGrpMemberTable	1.3.6.1.4.1.11.2.14.11.15.8.7.1.14		not-accessible	Table of cluster member switches
hpnicfhgmpGrpMemberEntry	1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1		not-accessible
OCT hpnicfhgmpGrpMemberDeviceId	1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.1	OCTET STRING	read-only	4 bytes reserved as 0x0 + 6 bytes of MAC address, expressed as a character string of the hexadecimal number.
I32 hpnicfhgmpGrpMemberSerial	1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.2	Integer32	read-only	When adding member switch to the cluster, the administrator switch will assign an unique integer to identify it.
IP hpnicfhgmpGrpMemberIpAddr	1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.3	IpAddress	read-only	The private IP addresses of the member switches for the communication inside the cluster.
OCT hpnicfhgmpGrpMemberName	1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.4	OCTET STRING	read-only	Hostname of the member switch
OCT hpnicfhgmpGrpMemberPassword	1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.5	OCTET STRING	read-write	Member password for joining a cluster
OCT hpnicfhgmpGrpMemberPlatform	1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.6	OCTET STRING	read-only	Set the hardware platform. A null string indicates the information does not exist in the device adjacency table.
INT hpnicfhgmpGrpMemberStatus	1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.7	INTEGER	read-only	Member status on the administrator switch, use for displaying the network management status.
I32 hpnicfhgmpGrpMemberDisconCount	1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.8	Integer32	read-only	Count of inside communication disconnection between the member switch and the administrator switch.
I32 hpnicfhgmpGrpMemberEnrollTime	1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.9	Integer32	read-only	Enrollment time of the member, measured in seconds.
ROW hpnicfhgmpGrpMemberOperate	1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.10	RowStatus	read-write	Operation indication field, indicates the operation of adding/removing a member by the network management agent.
hpnicfhgmpMemberResetTable	1.3.6.1.4.1.11.2.14.11.15.8.7.1.15		not-accessible	Reset a member switch in the cluster.
hpnicfhgmpMemberResetEntry	1.3.6.1.4.1.11.2.14.11.15.8.7.1.15.1		not-accessible
OCT hpnicfhgmpMemberResetMAC	1.3.6.1.4.1.11.2.14.11.15.8.7.1.15.1.1	OCTET STRING	read-only	The management MAC address of the switch to be reset, which is the unique identifier of the switch.
INT hpnicfhgmpMemberEraseflash	1.3.6.1.4.1.11.2.14.11.15.8.7.1.15.1.2	INTEGER	read-write	Whether to erase the configuration file from the flash after resetting the switch. Read this node, cannotget(65535) will be returned.
INT hpnicfhgmpClusterRole	1.3.6.1.4.1.11.2.14.11.15.8.7.1.16	INTEGER	read-only	This switch's role in cluster.
INT hpnicfhgmpClusterMaxPoolNum	1.3.6.1.4.1.11.2.14.11.15.8.7.1.17	INTEGER	read-only	Max switch members that the cluster can support(include administrator switch).
OCT hpnicfhgmpClusterCmdSwMac	1.3.6.1.4.1.11.2.14.11.15.8.7.1.18	OCTET STRING	read-only	The MAC address of administrator switch. It will be filled with zero when not be a member of cluster.
INT hpnicfhgmpRun	1.3.6.1.4.1.11.2.14.11.15.8.7.1.19	INTEGER	read-write	Enable cluster on this switch.
hpnicfhgmpProtocolMac	1.3.6.1.4.1.11.2.14.11.15.8.7.1.22
MAC hpnicfhgmpClusterProtocolMac	1.3.6.1.4.1.11.2.14.11.15.8.7.1.22.1	MacAddress	read-write	Protocol MAC of HGMP protocol family. All multicast packets of this protocol family use this MAC as destination MAC.
hpnicfhgmpTopologyManagement	1.3.6.1.4.1.11.2.14.11.15.8.7.1.23
hpnicfhgmpWhitelistTable	1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.1		not-accessible	Cluster switches white list table. White list topology is the topology which has been affirmed by network administrator in a cluster, and all devices in white list topology are recorded in this table. Against to white list table, black list table records the devices which are denied to join in cluster. Adding a black list device to white list table will cause a failure.
hpnicfhgmpWhitelistEntry	1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.1.1		not-accessible	Entry items
OCT hpnicfhgmpWhitelistDeviceId	1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.1.1.1	OCTET STRING	not-accessible	Unique identifier indicating a white list switch. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'.
I32 hpnicfhgmpWhitelistSerial	1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.1.1.2	Integer32	read-only	When adding member switch to the cluster, the administrator switch will assign an unique integer to identify it. 0xffff means invalid value for this object.
ROW hpnicfhgmpWhitelistRowStatus	1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.1.1.3	RowStatus	read-create	The row status of this table.
hpnicfhgmpWhitelistNbTable	1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.2		not-accessible	Cluster switches white list neighboring information table. White list neighbor table records all neighbor devices for every white list device. In fact, white list neighbor table displays the whole white list topology.
hpnicfhgmpWhitelistNbEntry	1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.2.1		not-accessible	Entry items
I32 hpnicfhgmpWhitelistNbIndex	1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.2.1.1	Integer32	not-accessible	Index of a switch which is the neighbor of a white list switch identified by 'hgmpWhitelistDeviceId'.
OCT hpnicfhgmpWhitelistNbDeviceId	1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.2.1.2	OCTET STRING	read-only	Unique identifier indicating a neighbor switch of a white list switch. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'.
OCT hpnicfhgmpWhitelistPortName	1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.2.1.3	OCTET STRING	read-only	The name of the port which a white list switch connects to the neighbor specified by 'hgmpWhitelistNbIndex'.
OCT hpnicfhgmpWhitelistNbPortName	1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.2.1.4	OCTET STRING	read-only	The name of the port which a neighbor device connects to the white list switch specified by 'hgmpWhitelistDeviceId'.
hpnicfhgmpBlacklistTable	1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.3		not-accessible	Cluster switches black list table. The black list table records all black list devices, and a device in black list is not permitted to join in any cluster.
hpnicfhgmpBlacklistEntry	1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.3.1		not-accessible	Entry items
OCT hpnicfhgmpBlacklistDeviceId	1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.3.1.1	OCTET STRING	not-accessible	Unique identifier indicating a black list switch. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'.
OCT hpnicfhgmpBlacklistAccessDeviceId	1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.3.1.2	OCTET STRING	read-only	Unique identifier indicating the access device of a black list switch. Tracing from a black list device to the cluster commander switch, the device which the black list switch directly connects to is the access device. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. 10 bytes of 0xff means invalid value for this object. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'.
OCT hpnicfhgmpBlacklistAccessPortName	1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.3.1.3	OCTET STRING	read-only	The port which the access device connecting to the black list switch is named access port, the object returns the access port name. An empty string means invalid value for this object.
ROW hpnicfhgmpBlacklistRowStatus	1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.3.1.4	RowStatus	read-create	The row status of this table.
hpnicfhgmpMemberPriPortTable	1.3.6.1.4.1.11.2.14.11.15.8.7.1.24		not-accessible	This table contains port number for different network protocols on each member switch. The port number can be used to access a specified member switch with specified protocol and private IP address.
hpnicfhgmpMemberPriPortEntry	1.3.6.1.4.1.11.2.14.11.15.8.7.1.24.1		not-accessible	Information about a specified member private port entry. The indexes of the entry are hpnicfhgmpGrpMemberDevId and hpnicfhgmpMemberPriPortProto, which indicate entries in the table.
OCT hpnicfhgmpMemberDevId	1.3.6.1.4.1.11.2.14.11.15.8.7.1.24.1.1	OCTET STRING	read-only	Unique identifier indicating the switch in cluster. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address.
U32 hpnicfhgmpMemberPriPortProto	1.3.6.1.4.1.11.2.14.11.15.8.7.1.24.1.2	Unsigned32	not-accessible	The index of this table. Each instance value of this object corresponds to a different protocol.
STR hpnicfhgmpMemberPriPortProtoDescr	1.3.6.1.4.1.11.2.14.11.15.8.7.1.24.1.3	DisplayString	read-only	It describes the hpnicfhgmpMemberPriPortProtocol object value. For example, it is 'SNMP' when hpnicfhgmpMemberPriPortProtocol value is 1.
U32 hpnicfhgmpMemberPriPortNum	1.3.6.1.4.1.11.2.14.11.15.8.7.1.24.1.4	Unsigned32	read-only	The private port number of member switch, used by specified hpnicfhgmpMemberPriPortProto. By using the private IP address, specified protocol and port number, other devices outside cluster can access member switch. The private IP address can be acquired by reading hpnicfhgmpGrpMemberIpAddr.
hpnicfStackObject	1.3.6.1.4.1.11.2.14.11.15.8.7.2			This MIB contains objects to manage the stack operations, which is used on lanswitch products.
hpnicfhgmpStackEventsV2	1.3.6.1.4.1.11.2.14.11.15.8.7.2.0			Definition point for Stack notifications.
NTF hpnicfhgmpStackMemberfailure	1.3.6.1.4.1.11.2.14.11.15.8.7.2.0.1			When a stack member failure, send a snmp trap to the network management.
NTF hpnicfhgmpStackMemberRecover	1.3.6.1.4.1.11.2.14.11.15.8.7.2.0.2			When a stack member Recover, send a snmp trap to the network management.
NTF hpnicfhgmpStackMemberStatusChange	1.3.6.1.4.1.11.2.14.11.15.8.7.2.0.3			When a stack member status change, send a snmp trap to the network management.
I32 hpnicfhgmpStackMemberTableChange	1.3.6.1.4.1.11.2.14.11.15.8.7.2.1	Integer32	read-only	Change identifier of the stack member table.
I32 hpnicfhgmpStackMemberDisconRate	1.3.6.1.4.1.11.2.14.11.15.8.7.2.2	Integer32	read-only	Disconnection rate of the stack member switches.
INT hpnicfhgmpMainLanswitchFlag	1.3.6.1.4.1.11.2.14.11.15.8.7.2.3	INTEGER	read-write	The status of the local switch in the stack.
IP hpnicfhgmpStackIpPoolStartIP	1.3.6.1.4.1.11.2.14.11.15.8.7.2.4	IpAddress	read-write	The first address of the management IP network segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment.
INT hpnicfhgmpStackIpPoolLength	1.3.6.1.4.1.11.2.14.11.15.8.7.2.5	INTEGER	read-write	The length of the management IP segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment.
hpnicfhgmpStackMemberTable	1.3.6.1.4.1.11.2.14.11.15.8.7.2.6		not-accessible	Stack member table.
hpnicfhgmpStackMemberEntry	1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1		not-accessible
OCT hpnicfhgmpStackMemberDeviceId	1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.1	OCTET STRING	read-only	2 bytes address type of the switch + 2 bytes zero + MAC address, expressed as a hexadecimal number string.
I32 hpnicfhgmpStackMemberSerial	1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.2	Integer32	read-only	When adding a member switch to the stack, the master switch will assign an unique integer to identify it.
IP hpnicfhgmpStackMemberIpAddr	1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.3	IpAddress	read-only	The private member IP address for the communication inside the stack.
OCT hpnicfhgmpStackMemberName	1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.4	OCTET STRING	read-only	Hostname of the member switch.
OCT hpnicfhgmpStackMemberPassword	1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.5	OCTET STRING	read-only	Member password for joining a stack.
OCT hpnicfhgmpStackMemberPlatform	1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.6	OCTET STRING	read-only	Set the hardware platform. A null string indicates the information does not exist in the device adjacency table.
INT hpnicfhgmpStackMemberStatus	1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.7	INTEGER	read-only	Member status on the master switch, use for displaying the network management status.
I32 hpnicfhgmpStackMemberDisconCount	1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.8	Integer32	read-only	Count of inside communication disconnection between the member switch and the master switch.
I32 hpnicfhgmpStackMemberEnrollTime	1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.9	Integer32	read-only	Enrollment time of the member, measured in seconds.
INT hpnicfhgmpStackRole	1.3.6.1.4.1.11.2.14.11.15.8.7.2.7	INTEGER	read-only	This switch's role status in stack.
INT hpnicfhgmpStackMaxPoolNum	1.3.6.1.4.1.11.2.14.11.15.8.7.2.8	INTEGER	read-only	Max switch members in one stack that the switch support (include main switch).
OCT hpnicfhgmpStackMainSwMac	1.3.6.1.4.1.11.2.14.11.15.8.7.2.9	OCTET STRING	read-only	The MAC address of main switch. It will be 00.00.00 when not be a member of stack.
IP hpnicfhgmpStackIpPoolMask	1.3.6.1.4.1.11.2.14.11.15.8.7.2.10	IpAddress	read-write	The mask of the management IP segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment.
hpnicfNTDPObject	1.3.6.1.4.1.11.2.14.11.15.8.7.4			This MIB contains objects to manage the ntdp operations, which are used on lanswitch products.
I32 hpnicfhgmpNTDPCollectTopTime	1.3.6.1.4.1.11.2.14.11.15.8.7.4.1	Integer32	read-write	Topology collection interval of the administrator switch of the cluster, measured in minutes.
I32 hpnicfhgmpNTDPHopRange	1.3.6.1.4.1.11.2.14.11.15.8.7.4.2	Integer32	read-write	Range of the topology collection of the administrator switch
INT hpnicfhgmpNTDPRun	1.3.6.1.4.1.11.2.14.11.15.8.7.4.3	INTEGER	read-write	Enable/Disable the NTDP function on the switch.
I32 hpnicfhgmpNTDPPortDelay	1.3.6.1.4.1.11.2.14.11.15.8.7.4.4	Integer32	read-write	Set the delay to forward the topology request via the ports, measured in milliseconds.
I32 hpnicfhgmpNTDPHopDelay	1.3.6.1.4.1.11.2.14.11.15.8.7.4.5	Integer32	read-write	Set the delay to forward the topology request from every hop, measured in milliseconds.
I32 hpnicfhgmpNTDPLastTopCollectDuration	1.3.6.1.4.1.11.2.14.11.15.8.7.4.6	Integer32	read-only	Duration of the latest overall topology collection, a performance count measured in seconds.
I32 hpnicfhgmpNTDPCacheChange	1.3.6.1.4.1.11.2.14.11.15.8.7.4.7	Integer32	read-only	Add 1 when the device table changes. The network administrator will check if it has changed before accessing the table. If it has not changed, he will not access again.
I32 hpnicfhgmpNTDPTOPTableChange	1.3.6.1.4.1.11.2.14.11.15.8.7.4.8	Integer32	read-only	Add 1 when the topology table changes. The network administrator will check if it has changed before accessing the table. If it has not changed, he will not access again.
hpnicfhgmpNTDPInterfaceTable	1.3.6.1.4.1.11.2.14.11.15.8.7.4.9		not-accessible	Enable/Disable the NTDP on the switch port.
hpnicfhgmpNTDPInterfaceEntry	1.3.6.1.4.1.11.2.14.11.15.8.7.4.9.1		not-accessible
I32 hpnicfhgmpNTDPInterfaceIfIndex	1.3.6.1.4.1.11.2.14.11.15.8.7.4.9.1.1	Integer32	read-only	Unique identifier an interface of the device.
INT hpnicfhgmpNTDPInterfaceEnable	1.3.6.1.4.1.11.2.14.11.15.8.7.4.9.1.2	INTEGER	read-write	If it is true, the device will send and receive the NTDP packets via the interface. To disable the NTDP function on the interface, set the entry as false.
hpnicfhgmpNTDPCacheTable	1.3.6.1.4.1.11.2.14.11.15.8.7.4.10		not-accessible	Access the information about the switch from the topology table.
hpnicfhgmpNTDPCacheEntry	1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1		not-accessible
I32 hpnicfhgmpNTDPCacheHashIndex	1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.1	Integer32	read-only	Our NTDP information is saved in the HASH table on the administrator switch. Using DeviceID as index will lead to the comparison of a large amount of character strings, which puts too many burdens on the administrator switch. A HAHSIndex is added to reduce the character string comparison to the least range.
OCT hpnicfhgmpNTDPCacheDeviceID	1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.2	OCTET STRING	read-only	2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.
OCT hpnicfhgmpNTDPCacheClusterName	1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.3	OCTET STRING	read-only	Name of the cluster including the device.
INT hpnicfhgmpNTDPCacheClusterRole	1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.4	INTEGER	read-only	Cluster role of the current device, which can be a administrator switch (0x01), member switch(0x02), backup switch(0x03), candidate switch(0x10) or an independent switch (incapable of cluster member) (0x11).
INT hpnicfhgmpNTDPCacheCapabilities	1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.5	INTEGER	read-only	The capabilities of the device. FF indicates that the field was not included in in the latest NTDP packet.
OCT hpnicfhgmpNTDPCacheVersion	1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.6	OCTET STRING	read-only	The version information of the corresponding device. A null string indicates that the field was not included in in the latest NTDP packet.
OCT hpnicfhgmpNTDPCachePlatform	1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.7	OCTET STRING	read-only	Hardware platform. A null string indicates that the field was not included in the latest NTDP packet.
INT hpnicfhgmpNTDPCacheMngVLAN	1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.8	INTEGER	read-only	The management VLAN ID of the device.
INT hpnicfhgmpNTDPCacheHop	1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.9	INTEGER	read-only	Hops to this switch.
hpnicfhgmpNTDPTopTable	1.3.6.1.4.1.11.2.14.11.15.8.7.4.11		not-accessible	Access the topology structure collected by the NTDP.
hpnicfhgmpNTDPTopEntry	1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1		not-accessible
I32 hpnicfhgmpNTDPTopHashIndex	1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.1	Integer32	read-only	Our NTDP information is saved in the HASH table on the administrator switch. Using DeviceID as index will lead to the comparison of a large amount of character strings, which puts too many burdens on the administrator switch. A HAHSIndex is added to reduce the character string comparison to the least range.
OCT hpnicfhgmpNTDPTopEdgeStartDevID	1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.2	OCTET STRING	read-only	2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.
I32 hpnicfhgmpNTDPTopEdgeIndex	1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.3	Integer32	read-only	Edge index of this entry in the data structure.
OCT hpnicfhgmpNTDPTopEdgeEndDevID	1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.4	OCTET STRING	read-only	2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.
OCT hpnicfhgmpNTDPTopEdgeStartPort	1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.5	OCTET STRING	read-only	The number of the first port of a topology edge. Interface type + card number / slot number / sequence number.
INT hpnicfhgmpNTDPTopEdgeStartPortFullDuplex	1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.6	INTEGER	read-only	The full-duplex status of the first port on a topology edge.
I32 hpnicfhgmpNTDPTopEdgeStartPortSpeed	1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.7	Integer32	read-only	The speed of the first port on a topology edge.
OCT hpnicfhgmpNTDPTopEdgeEndPort	1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.8	OCTET STRING	read-only	The number of the last port of a topology edge. Interface type + card number / slot number / sequence number.
INT hpnicfhgmpNTDPTopLinkStatus	1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.11	INTEGER	read-only	In STP or RSTP, it describes link status according to port STP steady status. In MSTP it describes STP steady status of the instance which management VLAN belongs to. Either 'hgmpNTDPTopEdgeStartPort' or 'hgmpNTDPTopEdgeEndPort' STP steady status is 'blocking', this object is 'blocking', otherwise is 'forwarding'. If STP or MSTP is disabled, this object is 'forwarding'.
hpnicfNDPObject	1.3.6.1.4.1.11.2.14.11.15.8.7.5			This MIB contains objects to manage the ndp operations, which are used on lanswitch products.
INT hpnicfNDPStatus	1.3.6.1.4.1.11.2.14.11.15.8.7.5.1	INTEGER	read-write	NDP protocol module enable flag
I32 hpnicfNDPHelloTimer	1.3.6.1.4.1.11.2.14.11.15.8.7.5.2	Integer32	read-write	NDP packet transmission interval, measured in seconds.
I32 hpnicfNDPAgingTime	1.3.6.1.4.1.11.2.14.11.15.8.7.5.3	Integer32	read-write	How long the NDP information of the local switch can be hold in the adjacent switch, measured in seconds.
C32 hpnicfNDPChange	1.3.6.1.4.1.11.2.14.11.15.8.7.5.4	Counter32	read-only	Change identifier of the Neighbor table
hpnicfNDPPortTable	1.3.6.1.4.1.11.2.14.11.15.8.7.5.5		not-accessible	Configure to enable/disable the interface NDP of the switch.
hpnicfNDPPortEntry	1.3.6.1.4.1.11.2.14.11.15.8.7.5.5.1		not-accessible
I32 hpnicfNDPIfIndex	1.3.6.1.4.1.11.2.14.11.15.8.7.5.5.1.1	Integer32	read-only	Unique identifier of an interface of the device.
INT hpnicfNDPPortStatus	1.3.6.1.4.1.11.2.14.11.15.8.7.5.5.1.2	INTEGER	read-write	If it is enable, the device will send and receive the NDP packets via the interface. To disable the NDP function on the interface, set the entry as false.
hpnicfNDPPortNbTable	1.3.6.1.4.1.11.2.14.11.15.8.7.5.6		not-accessible	NDP neighbor information on the switch.
hpnicfNDPPortNbEntry	1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1		not-accessible
OCT hpnicfNDPPortNbDeviceId	1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.1	OCTET STRING	read-only	2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.
OCT hpnicfNDPPortNbPortName	1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.2	OCTET STRING	read-only	Unique identifier of a port. A null string indicates that the field was not included in in the latest NDP packet. Interface type + card number / slot number / sequence number.
OCT hpnicfNDPPortNbDeviceName	1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.3	OCTET STRING	read-only	Device name. A null string indicates that the field was not included in the latest NDP packet.
INT hpnicfNDPPortNbPortMode	1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.4	INTEGER	read-only	The neighbor port duplex mode.
OCT hpnicfNDPPortNbProductVer	1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.5	OCTET STRING	read-only	Product version. A null string indicates that the field was not included in the latest NDP packet.
OCT hpnicfNDPPortNbHardVer	1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.6	OCTET STRING	read-only	Hardware version. A null string indicates that the field was not included in the latest NDP packet.
OCT hpnicfNDPPortNbBootromVer	1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.7	OCTET STRING	read-only	Bootrom version. A null string indicates that the field was not included in the latest NDP packet.
OCT hpnicfNDPPortNbSoftVer	1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.8	OCTET STRING	read-only	Software version. A null string indicates that the field was not included in the latest NDP packet.
I32 hpnicfNDPPortNbAgingtime	1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.9	Integer32	read-only	How long the NDP information of the local switch can be hold in the adjacent switch, measured in seconds.

RFC description

Manages HP/H3C cluster and group management protocol (HGMP) operations for LAN switch topology and network clustering.

Start monitoring HP/H3C Comware LAN switch (clustered, HGMP) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPN-ICF-HGMP-MIB

What Is HPN-ICF-HGMP-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description