All MIBs › CLJ8500-MIB › prtoutputmaxcapacity
prtoutputmaxcapacity
Module: CLJ8500-MIB
OID (symbolic): CLJ8500-MIB::prtoutputmaxcapacity
OID (numeric): 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The maximum capacity of this output sub-unit in output sub-unit capacity units (PrtCapacityUnitTC). There is no convention associated with the media itself so this value essentially reflects claimed capacity. If this output sub-unit can reliably sense this value, the value is sensed by the printer and may not be changed by management requests; otherwise, the value may be written (by a Remote Control Panel or a Management Application). The value (-1) means other and specifically indicates that the sub-unit places no restrictions on this parameter. The value (-2) means unknown. Additional information: Replaces PML OUTBINn-MAXIMUM-CAPACITY. Output sub-unit 2 is not supported if any output paper handling device is attached. The capacity of sub-unit 4 depends on the mode of operation. The capcities are as follows: Stacker: 2000 (sub-units 5-11 do not exist) Job Separator: 250 (sub-units 5-11 do not exist) Mailbox: 250 (this is the default mode)
What is prtoutputmaxcapacity?
This object reports the rated maximum capacity of an output bin, expressed in the units given by prtOutputCapacityUnit, and is sensed automatically on trays that support it. An admin relies on this figure to know how many finished pages a bin can hold before it must be emptied, which is critical for unattended high-volume print runs. For example, a stacking bin rated for 500 sheets that has been accumulating output all day would need to be checked against prtOutputRemainingCapacity as it approaches that maximum.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.4 snmpwalk -v2c -c public <target> CLJ8500-MIB::prtoutputmaxcapacity
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.4.1 snmpget -v2c -c public <target> CLJ8500-MIB::prtoutputmaxcapacity.1
Start monitoring HP Color LaserJet 8500 series printer with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CLJ8500-MIB::prtoutputmaxcapacity OID value, configure state conditions and alerts, and monitor any HP Color LaserJet 8500 series printer from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9 | net_peripheral | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4 | netdm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2 | dm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2 | printmib | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9 | prtOutput | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2 | prtOutputTable | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1 | prtOutputEntry | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.4 | prtoutputmaxcapacity | CLJ8500-MIB |