All MIBs › CLJ8500-MIB › prtinputmediadimxfeeddirdeclared
prtinputmediadimxfeeddirdeclared
Module: CLJ8500-MIB
OID (symbolic): CLJ8500-MIB::prtinputmediadimxfeeddirdeclared
OID (numeric): 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object provides the value of the declared dimension, in
the cross feed direction, of the media that is (or, if empty,
was or will be) in this input sub-unit. The cross feed
direction is ninety degrees relative to the feed direction
associated with this sub-unit. This dimension is measured in
input sub-unit dimensional units (prtInputDimUnit). If this
input sub-unit can reliably sense this value, the value is
sensed by the printer and may not be changed by management
requests. Otherwise, the value may be changed. The value (-1)
means other and specifically means that this sub-unit places
no restriction on this parameter. The value (-2) indicates
unknown.
Additional information:
For trays 2, 3 and 4 (which can reliably sense this
value) the objects behave exactly the same as
prtInputMediaDimXFeedDirChosen.
Attempting to set this object for trays 2, 3 and 4 will cause
What is prtinputmediadimxfeeddirdeclared?
This object holds the declared width of the media loaded in an input tray, measured in the cross-feed direction, ninety degrees from the feed direction, using prtInputDimUnit's units. Like its feed-direction counterpart, it is printer-sensed when the tray supports it, but otherwise must be written by an admin or remote panel so jobs are formatted for the correct paper width. For example, switching a tray from Letter to A4 stock on a non-sensing tray requires updating this cross-feed value so the printer stops assuming the previous width.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.5 snmpwalk -v2c -c public <target> CLJ8500-MIB::prtinputmediadimxfeeddirdeclared
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.5.1 snmpget -v2c -c public <target> CLJ8500-MIB::prtinputmediadimxfeeddirdeclared.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.5.1 i <value>
Start monitoring HP Color LaserJet 8500 series printer with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CLJ8500-MIB::prtinputmediadimxfeeddirdeclared OID value, configure state conditions and alerts, and monitor any HP Color LaserJet 8500 series printer from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9 | net_peripheral | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4 | netdm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2 | dm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2 | printmib | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8 | prtInput | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2 | prtInputTable | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1 | prtInputEntry | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.5 | prtinputmediadimxfeeddirdeclared | CLJ8500-MIB |