All MIBs › CLJ8500-MIB › prtinputmediadimxfeeddirchosen
prtinputmediadimxfeeddirchosen
Module: CLJ8500-MIB
OID (symbolic): CLJ8500-MIB::prtinputmediadimxfeeddirchosen
OID (numeric): 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The printer will act as if media of the chosen dimension (in the cross feed direction) is present in this input source. Note that this value will be used even if the input tray is empty. The cross feed direction is ninety degrees relative to the feed direction associated with this sub-unit. This dimension is measured in input sub-unit dimensional units (MediaUnit). If the printer supports the declared dimension, the granted dimension is the same as the declared dimension. If not, the granted dimension is set to the closest dimension that the printer supports when the declared dimension is set. The value (-1) means other and specifically indicates that this sub-unit places no restriction on this parameter. The value (-2) indicates unknown. Additional information: The objects for trays 2, 3 and 4 reflect the configuration of the corresponding drawers. When the drawer is open, a value of -2 is returned. The default values assume the trays are configured for letter size paper. The object for trays 1 returns the value of the media size for which the tray is currently configured.
What is prtinputmediadimxfeeddirchosen?
This read-only value reports the cross-feed-direction media dimension the printer will use for this input source, applied even when the tray is currently empty. Comparing it against the declared cross-feed dimension lets an admin verify whether the printer granted the exact requested paper width or fell back to a different supported size. For example, if a tray was declared at a nonstandard width but the chosen value snaps to a standard width, the admin knows the printer substituted its nearest supported size.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.7 snmpwalk -v2c -c public <target> CLJ8500-MIB::prtinputmediadimxfeeddirchosen
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.7.1 snmpget -v2c -c public <target> CLJ8500-MIB::prtinputmediadimxfeeddirchosen.1
Start monitoring HP Color LaserJet 8500 series printer with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CLJ8500-MIB::prtinputmediadimxfeeddirchosen OID value, configure state conditions and alerts, and monitor any HP Color LaserJet 8500 series printer from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9 | net_peripheral | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4 | netdm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2 | dm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2 | printmib | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8 | prtInput | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2 | prtInputTable | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1 | prtInputEntry | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.7 | prtinputmediadimxfeeddirchosen | CLJ8500-MIB |