All MIBs › CISCOSB-DHCP-MIB
Organization: Cisco Small Business
Last Updated: 2003-10-18
Category: Vendor: RADLAN/Cisco SB
Description: Manages Cisco Small Business DHCP server configuration including pools, leases, and exclusions.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is CISCOSB-DHCP-MIB?
CISCOSB-DHCP-MIB is a Cisco Small Business (Cisco SB, Radlan-based firmware) proprietary MIB configuring DHCP relay and server support on Cisco Small Business switches. Its objects cover MIB version, max/current non-IP-VLAN counts, relay enable/exists flags, a next-server table (IP address, security threshold, row status), an interface table (ifIndex, use-giaddr flag, row status), an interface-list table (port list, four VLAN-ID range bitmasks covering 1-4094), and DHCP-server enable/exists flags. As a configuration MIB it lets an administrator confirm DHCP relay is enabled and correctly forwarding to the intended relay server on a Cisco Small Business switch. It is deployed on Cisco Small Business managed switches. Engineers can download the CISCOSB-DHCP-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in CISCOSB-DHCP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Cisco Small Business managed switches
Monitoring Examples
An administrator checks rlDhcpRelayNextServerIpAddr and rlDhcpRelayEnable to confirm DHCP relay is forwarding to the correct server on a Cisco Small Business switch.
What Can Be Monitored
- DHCP relay/server configuration
This MIB depends on
Related MIBs
Imported Objects
From CISCOSB-BRIDGEMIBOBJECTS-MIB
| VlanList1 | |
| VlanList2 | |
| VlanList3 | |
| VlanList4 |
From CISCOSB-MIB
| switch001 | MODULE-IDENTITY |
From Q-BRIDGE-MIB
| PortList |
From SNMP-FRAMEWORK-MIB
| SnmpAdminString |
From SNMPv2-SMI
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DisplayString | |
| RowStatus | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| U32 rlDhcpRelayCurrentNumberOfNonIpVlans | 1.3.6.1.4.1.9.6.1.101.38.24 | Unsigned32 | read-only | Current number non-ip vlans that DHCP relay can be confirued on. |
| T/F rlDhcpRelayEnable | 1.3.6.1.4.1.9.6.1.101.38.25 | TruthValue | read-write | Enable or disable the use of the DHCP relay. |
| T/F rlDhcpRelayExists | 1.3.6.1.4.1.9.6.1.101.38.26 | TruthValue | read-only | This variable shows whether the device can function as a DHCP Relay Agent. |
| rlDhcpRelayInterfaceEntry | 1.3.6.1.4.1.9.6.1.101.38.28.1 | not-accessible | The row definition for this table. The user can add entry when DHCP relay is enabled on Interface. | |
| INT rlDhcpRelayInterfaceIfindex | 1.3.6.1.4.1.9.6.1.101.38.28.1.1 | INTEGER | read-write | The Interface on which an user enables a DHCP relay |
| rlDhcpRelayInterfaceListEntry | 1.3.6.1.4.1.9.6.1.101.38.29.1 | not-accessible | The entry contains port list and vlan lists of interfaces that have configured DHCP relay. | |
| INT rlDhcpRelayInterfaceListIndex | 1.3.6.1.4.1.9.6.1.101.38.29.1.1 | INTEGER | read-only | Index in the table. Already 1. |
| POR rlDhcpRelayInterfaceListPortList | 1.3.6.1.4.1.9.6.1.101.38.29.1.2 | PortList | read-write | DHCP relay Interface Port List. |
| rlDhcpRelayInterfaceListTable | 1.3.6.1.4.1.9.6.1.101.38.29 | not-accessible | This table contains one entry. The entry contains port list and vlan lists of interfaces that have configured DHCP relay | |
| VLA rlDhcpRelayInterfaceListVlanId1025To2048 | 1.3.6.1.4.1.9.6.1.101.38.29.1.4 | VlanList2 | read-write | DHCP relay Interface VlanId List 2. |
| VLA rlDhcpRelayInterfaceListVlanId1To1024 | 1.3.6.1.4.1.9.6.1.101.38.29.1.3 | VlanList1 | read-write | DHCP relay Interface VlanId List 1. |
| VLA rlDhcpRelayInterfaceListVlanId2049To3072 | 1.3.6.1.4.1.9.6.1.101.38.29.1.5 | VlanList3 | read-write | DHCP relay Interface VlanId List 3. |
| VLA rlDhcpRelayInterfaceListVlanId3073To4094 | 1.3.6.1.4.1.9.6.1.101.38.29.1.6 | VlanList4 | read-write | DHCP relay Interface VlanId List 4. |
| ROW rlDhcpRelayInterfaceRowStatus | 1.3.6.1.4.1.9.6.1.101.38.28.1.3 | RowStatus | read-write | Entry status. Can be destroy, active or createAndGo |
| rlDhcpRelayInterfaceTable | 1.3.6.1.4.1.9.6.1.101.38.28 | not-accessible | The enabled DHCP Relay Interface Table | |
| T/F rlDhcpRelayInterfaceUseGiaddr | 1.3.6.1.4.1.9.6.1.101.38.28.1.2 | TruthValue | read-write | The flag is used to set a DHCP relay interface to use GiAddr in the standard way. Default is TRUE. The field is not supported. |
| U32 rlDhcpRelayMaximalNumberOfNonIpVlans | 1.3.6.1.4.1.9.6.1.101.38.23 | Unsigned32 | read-only | Maximal number non-ip vlans that DHCP relay can be confirued on. |
| rlDhcpRelayNextServerEntry | 1.3.6.1.4.1.9.6.1.101.38.27.1 | not-accessible | The row definition for this table. DHCP requests are relayed to the specified next server according to their threshold values. | |
| IP rlDhcpRelayNextServerIpAddr | 1.3.6.1.4.1.9.6.1.101.38.27.1.1 | IpAddress | read-only | The IPAddress of the next configuration server. DHCP Server may act as a DHCP relay if this parameter is not equal to 0.0.0.0. |
| ROW rlDhcpRelayNextServerRowStatus | 1.3.6.1.4.1.9.6.1.101.38.27.1.3 | RowStatus | read-write | This variable displays the validity or invalidity of the entry. Setting it to 'destroy' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent. |
| U32 rlDhcpRelayNextServerSecThreshold | 1.3.6.1.4.1.9.6.1.101.38.27.1.2 | Unsigned32 | read-write | DHCP requests are relayed only if their SEC field is greater or equal to the threshold value in order to allow local DHCP Servers to answer first. |
| rlDhcpRelayNextServerTable | 1.3.6.1.4.1.9.6.1.101.38.27 | not-accessible | The DHCP Relay Next Servers configuration Table | |
| U32 rlDhcpSrvAuxOptionCode | 1.3.6.1.4.1.9.6.1.101.38.58.1.1 | Unsigned32 | read-only | The option Code. |
| rlDhcpSrvAuxOptionEntry | 1.3.6.1.4.1.9.6.1.101.38.58.1 | not-accessible | The row definition for this table. Each entry contains pair option code/option type that permitted by option command. | |
| U32 rlDhcpSrvAuxOptionMaxVal | 1.3.6.1.4.1.9.6.1.101.38.58.1.4 | Unsigned32 | read-only | The maximal value of this option Code. |
| U32 rlDhcpSrvAuxOptionMinVal | 1.3.6.1.4.1.9.6.1.101.38.58.1.3 | Unsigned32 | read-only | The minimal value of this option Code. |
| rlDhcpSrvAuxOptionTable | 1.3.6.1.4.1.9.6.1.101.38.58 | not-accessible | The DHCP Auxulary Option Table | |
| RLD rlDhcpSrvAuxOptionType | 1.3.6.1.4.1.9.6.1.101.38.58.1.2 | RlDhcpSrvOptionTypeEnum | read-only | The option enumeration. |
| STR rlDhcpSrvConfParamsBootfileName | 1.3.6.1.4.1.9.6.1.101.38.47.1.4 | DisplayString | read-write | Name of file for client to request from next server. |
| STR rlDhcpSrvConfParamsCommunity | 1.3.6.1.4.1.9.6.1.101.38.47.1.11 | DisplayString | read-write | The value of site-specific option 128, which defines Community. The option will be added only if rlDhcpSrvConfParamsNmsIp is set. |
| STR rlDhcpSrvConfParamsDnsList | 1.3.6.1.4.1.9.6.1.101.38.47.1.7 | DisplayString | read-write | The value of option code 6, which defines the list of DNSs. Each IP address is represented in dotted decimal notation format with ';' between them. |
| STR rlDhcpSrvConfParamsDomainName | 1.3.6.1.4.1.9.6.1.101.38.47.1.8 | SnmpAdminString | read-write | The value option code 15, which defines the domain name.. |
| rlDhcpSrvConfParamsEntry | 1.3.6.1.4.1.9.6.1.101.38.47.1 | not-accessible | The row definition for this table. Each entry corresponds to one specific parameters set. | |
| STR rlDhcpSrvConfParamsName | 1.3.6.1.4.1.9.6.1.101.38.47.1.1 | DisplayString | read-write | This value is a unique index for the entry in the rlDhcpSrvConfParamsTable. |
| STR rlDhcpSrvConfParamsNetbiosNameList | 1.3.6.1.4.1.9.6.1.101.38.47.1.9 | DisplayString | read-write | The value option code 44, which defines the list of NETBios Name Servers. Each IP address is represented in dotted decimal notation format with ';' between them. |
| INT rlDhcpSrvConfParamsNetbiosNodeType | 1.3.6.1.4.1.9.6.1.101.38.47.1.10 | INTEGER | read-write | The value option code 46, which defines the NETBios node type. The option will be added only if rlDhcpSrvConfParamsNetbiosNameList is not empty. |
| IP rlDhcpSrvConfParamsNextServerIp | 1.3.6.1.4.1.9.6.1.101.38.47.1.2 | IpAddress | read-write | The IP of next server for client to use in configuration process. |
| STR rlDhcpSrvConfParamsNextServerName | 1.3.6.1.4.1.9.6.1.101.38.47.1.3 | DisplayString | read-write | The mame of next server for client to use in configuration process. |
| IP rlDhcpSrvConfParamsNmsIp | 1.3.6.1.4.1.9.6.1.101.38.47.1.12 | IpAddress | read-write | The value of site-specific option 129, which defines IP of Network Manager. |
| STR rlDhcpSrvConfParamsOptionsList | 1.3.6.1.4.1.9.6.1.101.38.47.1.13 | DisplayString | read-write | The sequence of option segments. Each option segment is represented by a triplet . The code defines the code of each supported option. The length defines the length of each supported option. The value defines the value of the supported option. If there is a number of elements in the value field, they are divided by ','. Each element of type IP address in value field is represented in dotted decimal notation format. |
| STR rlDhcpSrvConfParamsRoutersList | 1.3.6.1.4.1.9.6.1.101.38.47.1.5 | DisplayString | read-write | The value of option code 3, which defines default routers list. Each IP address is represented in dotted decimal notation format with ';' between them. |
| ROW rlDhcpSrvConfParamsRowStatus | 1.3.6.1.4.1.9.6.1.101.38.47.1.14 | RowStatus | read-write | The row status variable, used according to row installation and removal conventions. |
| rlDhcpSrvConfParamsTable | 1.3.6.1.4.1.9.6.1.101.38.47 | not-accessible | The DHCP Configuration Parameters Table | |
| STR rlDhcpSrvConfParamsTimeSrvList | 1.3.6.1.4.1.9.6.1.101.38.47.1.6 | DisplayString | read-write | The value of option code 4, which defines time servers list. Each IP address is represented in dotted decimal notation format with ';' between them. |
| T/F rlDhcpSrvDbErase | 1.3.6.1.4.1.9.6.1.101.38.35 | TruthValue | read-write | The value is always false. Setting this variable to true causes erasing all entries in DHCP database. |
| INT rlDhcpSrvDbLocation | 1.3.6.1.4.1.9.6.1.101.38.32 | INTEGER | read-only | Describes where DHCP Server database is stored. |
| U32 rlDhcpSrvDbNumOfActiveEntries | 1.3.6.1.4.1.9.6.1.101.38.34 | Unsigned32 | read-only | This variable shows number of active (valid) entries stored in database. |
| STR rlDhcpSrvDefaultNetworkPoolName | 1.3.6.1.4.1.9.6.1.101.38.39 | DisplayString | read-only | Contains a default network pool name. Used in case of one network pool only. |
| U32 rlDhcpSrvDynamicAvailableNumOfAddr | 1.3.6.1.4.1.9.6.1.101.38.46.1.11 | Unsigned32 | read-only | Number of available addresses in space - all range minus excluded. |
| STR rlDhcpSrvDynamicConfParamsName | 1.3.6.1.4.1.9.6.1.101.38.46.1.9 | DisplayString | read-write | This variable points (serves as key) to appropriate set of parameters in the DHCP Server configuration parameters table. |
| rlDhcpSrvDynamicEntry | 1.3.6.1.4.1.9.6.1.101.38.46.1 | not-accessible | The row definition for this table. Parameters sent in as a DHCP Reply to DHCP Request with specified indices | |
| U32 rlDhcpSrvDynamicFreeNumOfAddr | 1.3.6.1.4.1.9.6.1.101.38.46.1.8 | Unsigned32 | read-only | Free number of addresses in space. |
| IP rlDhcpSrvDynamicIpAddrFrom | 1.3.6.1.4.1.9.6.1.101.38.46.1.2 | IpAddress | read-write | The first IP address allocated in this row. |
| IP rlDhcpSrvDynamicIpAddrTo | 1.3.6.1.4.1.9.6.1.101.38.46.1.3 | IpAddress | read-write | The last IP address allocated in this row. |
| IP rlDhcpSrvDynamicIpNetMask | 1.3.6.1.4.1.9.6.1.101.38.46.1.4 | IpAddress | read-write | The subnet mask associated with the IP addresses of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0. |
| U32 rlDhcpSrvDynamicLeaseTime | 1.3.6.1.4.1.9.6.1.101.38.46.1.5 | Unsigned32 | read-write | Maximum lease-time in seconds granted to a requesting DHCP client. For automatic allocation use 0xFFFFFFFF. To exclude addresses from allocation mechanism, set this value to 0. |
| U32 rlDhcpSrvDynamicNumOfDeclinedAddr | 1.3.6.1.4.1.9.6.1.101.38.46.1.15 | Unsigned32 | read-only | The number of declined addresses in space. |
| U32 rlDhcpSrvDynamicNumOfExpiredAddr | 1.3.6.1.4.1.9.6.1.101.38.46.1.14 | Unsigned32 | read-only | The number of expired addresses in space. |
| U32 rlDhcpSrvDynamicNumOfPreallocatedAddr | 1.3.6.1.4.1.9.6.1.101.38.46.1.12 | Unsigned32 | read-only | The number of preallocated addresses in space. |
| U32 rlDhcpSrvDynamicNumOfValidAddr | 1.3.6.1.4.1.9.6.1.101.38.46.1.13 | Unsigned32 | read-only | The number of Valid (allocated) addresses in space. |
| STR rlDhcpSrvDynamicOptionParamsName | 1.3.6.1.4.1.9.6.1.101.38.46.1.16 | DisplayString | read-write | The name of DHCP Option Table. |
| STR rlDhcpSrvDynamicPoolName | 1.3.6.1.4.1.9.6.1.101.38.46.1.1 | DisplayString | read-write | The name of DHCP dynamic addresses pool. |
| T/F rlDhcpSrvDynamicProbeEnable | 1.3.6.1.4.1.9.6.1.101.38.46.1.6 | TruthValue | read-write | Enable or Disable the use of the DHCP probe before allocating the address. |
| ROW rlDhcpSrvDynamicRowStatus | 1.3.6.1.4.1.9.6.1.101.38.46.1.10 | RowStatus | read-write | The row status variable, used according to row installation and removal conventions. |
| rlDhcpSrvDynamicTable | 1.3.6.1.4.1.9.6.1.101.38.46 | not-accessible | The DHCP Dynamic Server's configuration Table | |
| U32 rlDhcpSrvDynamicTotalNumOfAddr | 1.3.6.1.4.1.9.6.1.101.38.46.1.7 | Unsigned32 | read-only | Total number of addresses in space. |
| T/F rlDhcpSrvEnable | 1.3.6.1.4.1.9.6.1.101.38.30 | TruthValue | read-write | Enable or Disable the use of the DHCP Server. For a router product the default value is TRUE. For a switch product the default is FALSE. |
| T/F rlDhcpSrvExists | 1.3.6.1.4.1.9.6.1.101.38.31 | TruthValue | read-only | This variable shows whether the device can function as a DHCP Server. |
| U32 rlDhcpSrvIpAddrAgeTime | 1.3.6.1.4.1.9.6.1.101.38.45.1.7 | Unsigned32 | read-only | Age time of the IP Address. |
| STR rlDhcpSrvIpAddrClnHostName | 1.3.6.1.4.1.9.6.1.101.38.45.1.5 | SnmpAdminString | read-write | Client Host Name. DHCP Server will use it to update DNS Server. Must be unique per client. |
| STR rlDhcpSrvIpAddrConfParamsName | 1.3.6.1.4.1.9.6.1.101.38.45.1.9 | DisplayString | read-write | This variable points (serves as key) to appropriate set of parameters in the DHCP Server configuration parameters table. |
| rlDhcpSrvIpAddrEntry | 1.3.6.1.4.1.9.6.1.101.38.45.1 | not-accessible | The row definition for this table. Parameters of DHCP allocated IP Addresses table. | |
| OCT rlDhcpSrvIpAddrIdentifier | 1.3.6.1.4.1.9.6.1.101.38.45.1.3 | OCTET STRING | read-write | Unique Identifier for client. Either physical address or DHCP Client Identifier. |
| INT rlDhcpSrvIpAddrIdentifierType | 1.3.6.1.4.1.9.6.1.101.38.45.1.4 | INTEGER | read-write | Identifier Type. Either physical address or DHCP Client Identifier. |
| IP rlDhcpSrvIpAddrIpAddr | 1.3.6.1.4.1.9.6.1.101.38.45.1.1 | IpAddress | read-write | The IP address that was allocated by DHCP Server. |
| IP rlDhcpSrvIpAddrIpNetMask | 1.3.6.1.4.1.9.6.1.101.38.45.1.2 | IpAddress | read-write | The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0. |
| U32 rlDhcpSrvIpAddrLeaseTime | 1.3.6.1.4.1.9.6.1.101.38.45.1.11 | Unsigned32 | read-only | Lease time of the IP Address. Get a value of network pool lease time at allocation time. |
| INT rlDhcpSrvIpAddrMechanism | 1.3.6.1.4.1.9.6.1.101.38.45.1.6 | INTEGER | read-write | Mechanism of allocation IP Address by DHCP Server. The only value that can be set by user is manual. |
| STR rlDhcpSrvIpAddrOptionParamsName | 1.3.6.1.4.1.9.6.1.101.38.45.1.13 | DisplayString | read-write | The name of DHCP Option Table. |
| STR rlDhcpSrvIpAddrPoolName | 1.3.6.1.4.1.9.6.1.101.38.45.1.8 | DisplayString | read-write | Ip address pool name. A unique name for host pool static allocation, or network pool name in case of dynamic allocation. |
| ROW rlDhcpSrvIpAddrRowStatus | 1.3.6.1.4.1.9.6.1.101.38.45.1.10 | RowStatus | read-write | The row status variable, used according to row installation and removal conventions. |
| INT rlDhcpSrvIpAddrState | 1.3.6.1.4.1.9.6.1.101.38.45.1.12 | INTEGER | read-only | State of allocation IP Address by DHCP Server. |
| rlDhcpSrvIpAddrTable | 1.3.6.1.4.1.9.6.1.101.38.45 | not-accessible | Table of IP Addresses allocated by DHCP Server by static and dynamic allocations. | |
| U32 rlDhcpSrvMaxNumOfClients | 1.3.6.1.4.1.9.6.1.101.38.33 | Unsigned32 | read-only | This variable shows maximum number of clients that can be supported by DHCP Server dynamic allocation. |
| U32 rlDhcpSrvNumOfAutomaticEntries | 1.3.6.1.4.1.9.6.1.101.38.56 | Unsigned32 | read-only | This variable shows number of automatic entries. |
| U32 rlDhcpSrvNumOfDeclinedEntries | 1.3.6.1.4.1.9.6.1.101.38.55 | Unsigned32 | read-only | This variable shows number of declined entries. |
| U32 rlDhcpSrvNumOfDynamicEntries | 1.3.6.1.4.1.9.6.1.101.38.51 | Unsigned32 | read-only | This variable shows number of dynamic and automatic (not static) entries stored in database. |
| U32 rlDhcpSrvNumOfExcludedPools | 1.3.6.1.4.1.9.6.1.101.38.49 | Unsigned32 | read-only | This variable shows number of excluded pools. |
| U32 rlDhcpSrvNumOfExpiredEntries | 1.3.6.1.4.1.9.6.1.101.38.54 | Unsigned32 | read-only | This variable shows number of expired entries. |
| U32 rlDhcpSrvNumOfHostPools | 1.3.6.1.4.1.9.6.1.101.38.50 | Unsigned32 | read-only | This variable shows number of static entries stored in database. |
| U32 rlDhcpSrvNumOfNetworkPools | 1.3.6.1.4.1.9.6.1.101.38.48 | Unsigned32 | read-only | This variable shows number of network pools (not excluded). |
| U32 rlDhcpSrvNumOfPreAllocatedEntries | 1.3.6.1.4.1.9.6.1.101.38.53 | Unsigned32 | read-only | This variable shows number of preallocated entries. |
| U32 rlDhcpSrvNumOfUsedEntries | 1.3.6.1.4.1.9.6.1.101.38.52 | Unsigned32 | read-only | This variable shows number of entries (any type) stored in database. |
| U32 rlDhcpSrvOptionParamsCode | 1.3.6.1.4.1.9.6.1.101.38.57.1.2 | Unsigned32 | read-write | The option code. |
| STR rlDhcpSrvOptionParamsDescription | 1.3.6.1.4.1.9.6.1.101.38.57.1.5 | DisplayString | read-write | The option description. |
| rlDhcpSrvOptionParamsEntry | 1.3.6.1.4.1.9.6.1.101.38.57.1 | not-accessible | The row definition for this table. Each entry corresponds to one specific parameters set. | |
| STR rlDhcpSrvOptionParamsName | 1.3.6.1.4.1.9.6.1.101.38.57.1.1 | DisplayString | read-write | This value is a unique index for the entry in the rlDhcpSrvOptionParamsTable. |
| STR rlDhcpSrvOptionParamsOrigString | 1.3.6.1.4.1.9.6.1.101.38.57.1.4 | DisplayString | read-write | The option value. |
| ROW rlDhcpSrvOptionParamsRowStatus | 1.3.6.1.4.1.9.6.1.101.38.57.1.6 | RowStatus | read-write | The row status variable, used according to row installation and removal conventions. |
| rlDhcpSrvOptionParamsTable | 1.3.6.1.4.1.9.6.1.101.38.57 | not-accessible | The DHCP Option Parameters Table | |
| RLD rlDhcpSrvOptionParamsType | 1.3.6.1.4.1.9.6.1.101.38.57.1.3 | RlDhcpSrvOptionTypeEnum | read-write | The option type. |
| T/F rlDhcpSrvProbeEnable | 1.3.6.1.4.1.9.6.1.101.38.36 | TruthValue | read-write | Enable or Disable the use of the DHCP probe before allocating an IP address. |
| U32 rlDhcpSrvProbeRetries | 1.3.6.1.4.1.9.6.1.101.38.38 | Unsigned32 | read-write | Indicates how many times DHCP will probe before deciding that no other device on the network has the IP address which DHCP considers allocating. |
| U32 rlDhcpSrvProbeTimeout | 1.3.6.1.4.1.9.6.1.101.38.37 | Unsigned32 | read-write | Indicates the peiod of time in milliseconds the DHCP probe will wait before issuing a new trial or deciding that no other device on the network has the IP address which DHCP considers allocating. |
| rsDHCP | 1.3.6.1.4.1.9.6.1.101.38 | The private MIB module definition for DHCP server support in CISCOSB devices. | ||
| INT rsDhcpMibVersion | 1.3.6.1.4.1.9.6.1.101.38.14 | INTEGER | read-write | DHCP MIB's version, the current version is 4. |
RFC description
Cisco Small Business DHCP server configuration and relay management for ROS switches.
Start monitoring Cisco Small Business managed switch with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.