RLLAN1-MIB

All MIBs › RLLAN1-MIB

Organization: MARVELL

Last Updated: 2015-06-30

Category: Vendor: RADLAN/Cisco SB

Description: Manages Marvell LAN1 switch interface configuration, port statistics, and link status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is RLLAN1-MIB?

RLLAN1-MIB is a Marvell (Radlan switch-software heritage) proprietary MIB implementing the 'Lan1' feature — CPU-facing VLAN classification and x86-port mapping used on switches with an embedded x86 management processor. Its objects cover the S-Tag EtherType, CPU-port VLAN ID/CoS, the x86-facing port, multicast-mapping VLAN IDs for CP/non-CP traffic, an x86 VLAN-mapping table (VLAN ID, group ID, row status), an x86 MAC-mapping table (destination MAC, VLAN ID, row status), and a module-port table (ifIndex, CP-allowed flags, multicast/broadcast-allowed VLAN, ingress/egress group ID lists). As a configuration MIB it lets an administrator confirm which VLANs and MAC addresses are routed to the switch's embedded x86 management processor. It is deployed on Marvell (Radlan-based) switches with an embedded x86 management processor. Engineers can download the RLLAN1-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in RLLAN1-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Marvell (Radlan-based) switches (embedded x86 management processor)

Monitoring Examples

An administrator checks rlLan1x86VlanMappingTable to confirm which VLAN traffic is routed to the embedded x86 management processor on a Marvell Radlan-based switch.

What Can Be Monitored

Lan1 VLAN/MAC classification and x86-port mapping

Imported Objects

From Q-BRIDGE-MIB

VlanId

From RADLAN-MIB

rnd	OBJECT-IDENTITY

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

MacAddress
RowStatus
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
rlLan1	1.3.6.1.4.1.89.224			The Lan1 MIB module for supporting Lan1 fetaure.
OCT rlLan1STagEtherType	1.3.6.1.4.1.89.224.1	OCTET STRING	read-write	Specifies the Ethernet type identifying the S-VLAN tag.
VLA rlLan1CPVlanId	1.3.6.1.4.1.89.224.2	VlanIdOrNone	read-write	Specifies the CP VLAN ID. 0 indicateds no CP vlan.
INT rlLan1CPVlanCos	1.3.6.1.4.1.89.224.3	INTEGER	read-write	Specifies the cos assigned to ingress traffic on module ports into the CP VLAN.
INT rlLan1x86Port	1.3.6.1.4.1.89.224.4	INTEGER	read-write	Specifies the interface-id of the Ethernet port connecting LAN1 to the x86 environment implementing Virtual Functions (VFs). 0 indicateds no x86 port defined.
VLA rlLan1CPVlanMulticastMappingVlanId	1.3.6.1.4.1.89.224.5	VlanIdOrNone	read-write	Specifies the VF which S-VLAN-ID is assigned to multicast/broadcast traffic bridged into the CP VLAN from modules to x86. 0 indicateds no vlan.
VLA rlLan1NonCPVlanMulticastMappingVlanId	1.3.6.1.4.1.89.224.6	VlanIdOrNone	read-write	Specifies the VF which S-VLAN-ID is assigned to multicast/broadcast traffic bridged into the non-CP VLAN from modules to x86. 0 indicateds no vlan.
rlLan1x86VlanMappingTable	1.3.6.1.4.1.89.224.7		not-accessible	A table that contains information mapping s-tag to group id.
rlLan1x86VlanMappingEntry	1.3.6.1.4.1.89.224.7.1		not-accessible	A mapping of incoming s-tag to a group.
VLA rlLan1x86VlanMappingVlanId	1.3.6.1.4.1.89.224.7.1.1	VlanId	not-accessible	The s-tag to mapped to group
GRO rlLan1x86VlanMappingGroupId	1.3.6.1.4.1.89.224.7.1.2	GroupId	read-write	group for filtering traffic
ROW rlLan1x86VlanMappingRowStatus	1.3.6.1.4.1.89.224.7.1.3	RowStatus	read-create	This object indicates the status of this entry.
rlLan1x86MacMappingTable	1.3.6.1.4.1.89.224.8		not-accessible	A table that contains information mapping Mac to s-tag.
rlLan1x86MacMappingEntry	1.3.6.1.4.1.89.224.8.1		not-accessible	A mapping of incoming s-tag to a group.
MAC rlLan1x86MacMappingDstMacAddress	1.3.6.1.4.1.89.224.8.1.1	MacAddress	not-accessible	destination mac address
VLA rlLan1x86MacMappingVlanId	1.3.6.1.4.1.89.224.8.1.2	VlanId	read-write	The s-tag
ROW rlLan1x86MacMappingRowStatus	1.3.6.1.4.1.89.224.8.1.3	RowStatus	read-create	This object indicates the status of this entry.
rlLan1x86ModulePortTable	1.3.6.1.4.1.89.224.9		not-accessible	A table that contains information on a LAN1 module port.
rlLan1x86ModulePortEntry	1.3.6.1.4.1.89.224.9.1		not-accessible	A mapping of incoming s-tag to a group.
INT rlLan1x86ModulePortIfIndex	1.3.6.1.4.1.89.224.9.1.1	INTEGER	not-accessible	Specifies the interface-id.
T/F rlLan1x86ModulePortCPAllowed	1.3.6.1.4.1.89.224.9.1.2	TruthValue	read-write	Specifies that CP traffic is allowed on the port, it is used to allow CP multicast/broadcast traffic.
T/F rlLan1x86ModulePortCPUntaggedAllowed	1.3.6.1.4.1.89.224.9.1.3	TruthValue	read-write	Specifies that untagged traffic belongs to the CP VLAN, it is used to allow ingress untagged multicast/broadcast traffic.
INT rlLan1x86ModulePortMulticastBroadcastAllowedVlan	1.3.6.1.4.1.89.224.9.1.4	INTEGER	read-write	Specifies that multicast/broadcast traffic is allowed on the CP VLAN or on non-CP VLAN. If the parameter is not configured then only unicast traffic is allowed.
GRO rlLan1x86ModulePortIngressGroupId	1.3.6.1.4.1.89.224.9.1.5	GroupId	read-write	Specifies the group number assigned to the input frame on the interface
GRO rlLan1x86ModulePortEgressGroupIdList	1.3.6.1.4.1.89.224.9.1.6	GroupIdList	read-write	Specifies the list of egress group numbers

RFC description

LAN1 feature support including provider VLAN (S-VLAN) and customer VLAN (CP VLAN) configuration.

Start monitoring Marvell (Radlan-based) switches with embedded x86 management processor (Lan1 VLAN/MAC classification) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download RLLAN1-MIB

What Is RLLAN1-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description