CISCO-SWITCH-QOS-MIB :: csqPoliceRedirectedTrafficEnable

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-SWITCH-QOS-MIBcsqPoliceRedirectedTrafficEnable

csqPoliceRedirectedTrafficEnable

Module: CISCO-SWITCH-QOS-MIB

OID (symbolic): CISCO-SWITCH-QOS-MIB::csqPoliceRedirectedTrafficEnable

OID (numeric): 1.3.6.1.4.1.9.9.580.1.1.2

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: This object specifies whether ACL-redirected traffic policing is enabled at a device-level of granularity, i.e., 'true' = enabled and 'false' = disabled. If no other objects specify whether ACL-redirected traffic is enabled at any different level of granularity, then this object's value is not subject to any modifiers. However, some devices might support other object(s) which specify whether ACL-redirected traffic policing is enabled at different level(s) of granularity. For such devices, the value of this object takes precedence over the values of such other object(s) when the value of this object is 'false'; in contrast, when the value of this object is 'true', the values of such other objects take precedence over the value of this object.

if 'true', ACL-redirected traffic is subject to policing. if 'false', ACL-redirected traffic is not policed.

What is csqPoliceRedirectedTrafficEnable?

Enables or disables policing of ACL-redirected traffic at the device level, unless overridden by a more granular setting.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.580.1.1.2
snmpwalk -v2c -c public <target> CISCO-SWITCH-QOS-MIB::csqPoliceRedirectedTrafficEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.580.1.1.2.1
snmpget -v2c -c public <target> CISCO-SWITCH-QOS-MIB::csqPoliceRedirectedTrafficEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.580.1.1.2.1 s <value>

Start monitoring Cisco Catalyst Layer 2/3 switches (QoS) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SWITCH-QOS-MIB::csqPoliceRedirectedTrafficEnable OID value, configure state conditions and alerts, and monitor any Cisco Catalyst Layer 2/3 switches (QoS) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.580ciscoSwitchQosMIBCISCO-SWITCH-QOS-MIB
1.3.6.1.4.1.9.9.580.1ciscoSwitchQosMIBObjectsCISCO-SWITCH-QOS-MIB
1.3.6.1.4.1.9.9.580.1.1csqGlobalsCISCO-SWITCH-QOS-MIB
1.3.6.1.4.1.9.9.580.1.1.2csqPoliceRedirectedTrafficEnableCISCO-SWITCH-QOS-MIB