CISCO-SWITCH-QOS-MIB :: csqIfVlanBasedQosModeEnable

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-SWITCH-QOS-MIBcsqIfVlanBasedQosModeEnable

csqIfVlanBasedQosModeEnable

Module: CISCO-SWITCH-QOS-MIB

OID (symbolic): CISCO-SWITCH-QOS-MIB::csqIfVlanBasedQosModeEnable

OID (numeric): 1.3.6.1.4.1.9.9.580.1.4.6.1.1

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: Specifies if VLAN-based mode is enabled or disabled at the specified interface.

If 'true', policy map that is attached to this interface has no effect, and QoS is driven by the policy map that is attached to the corresponding VLAN interface that this interface belongs to. Otherwise, the value of this object is 'false'.

What is csqIfVlanBasedQosModeEnable?

A read-write flag that enables or disables VLAN-based QoS mode on the interface; when true, QoS is governed by the policy map on the associated VLAN interface instead of the one attached directly to this interface.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.580.1.4.6.1.1
snmpwalk -v2c -c public <target> CISCO-SWITCH-QOS-MIB::csqIfVlanBasedQosModeEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.580.1.4.6.1.1.1
snmpget -v2c -c public <target> CISCO-SWITCH-QOS-MIB::csqIfVlanBasedQosModeEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.580.1.4.6.1.1.1 s <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> csqIfVlanBasedQosModeEnable.1

Start monitoring Cisco Catalyst Layer 2/3 switches (QoS) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SWITCH-QOS-MIB::csqIfVlanBasedQosModeEnable OID value, configure state conditions and alerts, and monitor any Cisco Catalyst Layer 2/3 switches (QoS) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.580ciscoSwitchQosMIBCISCO-SWITCH-QOS-MIB
1.3.6.1.4.1.9.9.580.1ciscoSwitchQosMIBObjectsCISCO-SWITCH-QOS-MIB
1.3.6.1.4.1.9.9.580.1.4csqInterfaceCISCO-SWITCH-QOS-MIB
1.3.6.1.4.1.9.9.580.1.4.6csqIfModeConfigTableCISCO-SWITCH-QOS-MIB
1.3.6.1.4.1.9.9.580.1.4.6.1csqIfModeConfigEntryCISCO-SWITCH-QOS-MIB
1.3.6.1.4.1.9.9.580.1.4.6.1.1csqIfVlanBasedQosModeEnableCISCO-SWITCH-QOS-MIB