CISCO-SWITCH-QOS-MIB :: csqMarkingStatisticsEnable

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-SWITCH-QOS-MIBcsqMarkingStatisticsEnable

csqMarkingStatisticsEnable

Module: CISCO-SWITCH-QOS-MIB

OID (symbolic): CISCO-SWITCH-QOS-MIB::csqMarkingStatisticsEnable

OID (numeric): 1.3.6.1.4.1.9.9.580.1.1.4

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: This object specifies whether statistics collection for policy that sets a trust state is enabled at a device-level of granularity, i.e., 'true' = enabled and 'false' = disabled. If no other objects specify whether statistics collection for policy that sets a trust state is enabled at any different level of granularity, then this object's value is not subject to any modifiers. However, some devices might support other object(s) which specify whether statistics collection for policy that sets a trust state is enabled at different level(s) of granularity. For such devices, the value of this object takes precedence over the values of such other object(s) when the value of this object is 'false'; in contrast, when the value of this object is 'true', the values of such other objects take precedence over the value of this object.

if 'true', statistics collection is enabled. if 'false', statistics collection is disabled.

What is csqMarkingStatisticsEnable?

Enables or disables collection of statistics for policies that set a trust state, at a device-wide level of granularity.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.580.1.1.4
snmpwalk -v2c -c public <target> CISCO-SWITCH-QOS-MIB::csqMarkingStatisticsEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.580.1.1.4.1
snmpget -v2c -c public <target> CISCO-SWITCH-QOS-MIB::csqMarkingStatisticsEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.580.1.1.4.1 s <value>

Start monitoring Cisco Catalyst Layer 2/3 switches (QoS) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SWITCH-QOS-MIB::csqMarkingStatisticsEnable OID value, configure state conditions and alerts, and monitor any Cisco Catalyst Layer 2/3 switches (QoS) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.580ciscoSwitchQosMIBCISCO-SWITCH-QOS-MIB
1.3.6.1.4.1.9.9.580.1ciscoSwitchQosMIBObjectsCISCO-SWITCH-QOS-MIB
1.3.6.1.4.1.9.9.580.1.1csqGlobalsCISCO-SWITCH-QOS-MIB
1.3.6.1.4.1.9.9.580.1.1.4csqMarkingStatisticsEnableCISCO-SWITCH-QOS-MIB