CISCO-SWITCH-QOS-MIB :: csqIfDropConfigDropThreshold

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-SWITCH-QOS-MIBcsqIfDropConfigDropThreshold

csqIfDropConfigDropThreshold

Module: CISCO-SWITCH-QOS-MIB

OID (symbolic): CISCO-SWITCH-QOS-MIB::csqIfDropConfigDropThreshold

OID (numeric): 1.3.6.1.4.1.9.9.580.1.4.4.1.5

Node type: OBJECT-TYPE

Type: Percent

Access: read-write

Description: This object specifies the drop threshold parameter for a pair of queue and threshold of an interface when the drop algorithm is tail drop. Once the packets in the buffer is more than the value of this object, the incoming packets of the buffer are dropped. The value is a percentage of the full buffer.

This object is configurable only if 'tailDrop' bit in the value of qosIfCapabilities for the same ifIndex and traffic direction is set. If value of csqIfDropConfigAlgorithm is not 'tailDrop', this object value has no effect. If value of csqIfDropConfigQueueBuffer is not 'percent', this object value has no effect.

What is csqIfDropConfigDropThreshold?

Configures the tail-drop buffer threshold for a queue/threshold pair on an interface; packets are dropped once buffer occupancy exceeds this value.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.580.1.4.4.1.5
snmpwalk -v2c -c public <target> CISCO-SWITCH-QOS-MIB::csqIfDropConfigDropThreshold

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.580.1.4.4.1.5.1
snmpget -v2c -c public <target> CISCO-SWITCH-QOS-MIB::csqIfDropConfigDropThreshold.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.580.1.4.4.1.5.1 s <value>

Start monitoring Cisco Catalyst Layer 2/3 switches (QoS) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SWITCH-QOS-MIB::csqIfDropConfigDropThreshold OID value, configure state conditions and alerts, and monitor any Cisco Catalyst Layer 2/3 switches (QoS) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.580ciscoSwitchQosMIBCISCO-SWITCH-QOS-MIB
1.3.6.1.4.1.9.9.580.1ciscoSwitchQosMIBObjectsCISCO-SWITCH-QOS-MIB
1.3.6.1.4.1.9.9.580.1.4csqInterfaceCISCO-SWITCH-QOS-MIB
1.3.6.1.4.1.9.9.580.1.4.4csqIfDropConfigTableCISCO-SWITCH-QOS-MIB
1.3.6.1.4.1.9.9.580.1.4.4.1csqIfDropConfigEntryCISCO-SWITCH-QOS-MIB
1.3.6.1.4.1.9.9.580.1.4.4.1.5csqIfDropConfigDropThresholdCISCO-SWITCH-QOS-MIB