All MIBs › CIENA-CES-MODULE-MIB
Organization: Ciena Corp.
Last Updated: 2014-01-23
Category: Hardware and Environment, Vendor: Ciena
Description: Monitors line card modules and their operational status in Ciena CES chassis-based switches.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is CIENA-CES-MODULE-MIB?
CIENA-CES-MODULE-MIB is a Ciena vendor MIB for Carrier Ethernet Switching (CES) chassis platforms that manages the configuration and operational status of individual line/service modules installed in the chassis. No sample objects were available for this module, but module-status MIBs of this type typically expose per-slot module type, administrative and operational state, and hardware inventory identifiers such as serial number and hardware revision, along with notifications for module insertion, removal, and failure. Its central monitoring value is hardware status, detecting whether a module is present, online, and healthy, and generating a trap when a module fails or is pulled, which is critical for maintaining service continuity on a modular carrier-grade switch. It is a standalone Ciena vendor MIB, generally used alongside the vendor's chassis/environmental MIBs rather than an IETF standard. It's deployed by carrier and service-provider network operations teams running modular Ciena CES chassis, where module-level fault notification supports rapid field replacement, and engineers typically open the CIENA-CES-MODULE-MIB MIB Browser view to inspect the module object tree directly.
IPNetwork Monitor allows you to monitor SNMP objects defined in CIENA-CES-MODULE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Ciena CES Carrier Ethernet switch (modular chassis)
Monitoring Examples
A network operations center would poll the module status table to confirm each installed line module reports an online/operational state, and would watch for a module-related trap indicating a card has gone offline or been removed. Hardware inventory fields such as serial number and hardware revision would be checked during a maintenance window to confirm the correct replacement module was installed. Because no sample objects were available, exact table/object names could not be confirmed, but the module description explicitly ties this MIB to module configuration and module-related notifications.
What Can Be Monitored
- module presence/insertion status
- module operational state
- module hardware inventory (serial, revision)
- module failure notifications
This MIB depends on
Related MIBs
Imported Objects
From CIENA-GLOBAL-MIB
| cienaGlobalMacAddress | OBJECT-TYPE |
| cienaGlobalSeverity | OBJECT-TYPE |
From CIENA-SMI
| cienaCesConfig | OBJECT-IDENTITY |
| cienaCesNotifications | OBJECT-IDENTITY |
From CIENA-TC
| CienaGlobalState |
From SNMPv2-CONF
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| TimeTicks | |
| Unsigned32 |
From SNMPv2-TC
| DisplayString | |
| MacAddress | |
| TEXTUAL-CONVENTION |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| INT cienaCesGlobalSwState | 1.3.6.1.4.1.1271.2.1.2.1.2.4.1 | INTEGER | read-only | The global software state of the system. |
| cienaCesModule | 1.3.6.1.4.1.1271.2.1.2.1.2 | |||
| CIE cienaCesModuleAdminPostState | 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.12 | CienaGlobalState | read-only | This object sets the POST administrative state for the given module. |
| INT cienaCesModuleAdminState | 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.7 | INTEGER | read-only | This object indicates the administrative state of the module. |
| U32 cienaCesModuleChassisIndx | 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.1 | Unsigned32 | not-accessible | This object indicates the chassis index for the module. |
| U32 cienaCesModuleChassisNotifIndx | 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.17 | Unsigned32 | accessible-for-notify | This object indicates the chassis index for the module used in trap definition. |
| cienaCesModuleConformance | 1.3.6.1.4.1.1271.2.1.2.2 | |||
| STR cienaCesModuleDescription | 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.6 | DisplayString | read-only | This object indicates the description of the module. |
| MAC cienaCesModuleDescriptionBaseMac | 1.3.6.1.4.1.1271.2.1.2.1.2.2.1.7 | MacAddress | read-only | This object indicates the module base MAC address. |
| STR cienaCesModuleDescriptionBoardDesc | 1.3.6.1.4.1.1271.2.1.2.1.2.2.1.4 | DisplayString | read-only | This object indicates the board description. |
| STR cienaCesModuleDescriptionBoardName | 1.3.6.1.4.1.1271.2.1.2.1.2.2.1.1 | DisplayString | read-only | This object indicates the module name. |
| STR cienaCesModuleDescriptionBoardPartNum | 1.3.6.1.4.1.1271.2.1.2.1.2.2.1.2 | DisplayString | read-only | This object indicates the board part number. |
| STR cienaCesModuleDescriptionBoardSerialNum | 1.3.6.1.4.1.1271.2.1.2.1.2.2.1.3 | DisplayString | read-only | This object indicates the board serial number. |
| cienaCesModuleDescriptionEntry | 1.3.6.1.4.1.1271.2.1.2.1.2.2.1 | not-accessible | An entry (conceptual row) in the cienaCesModuleDescriptionTable. | |
| STR cienaCesModuleDescriptionHwVersion | 1.3.6.1.4.1.1271.2.1.2.1.2.2.1.5 | DisplayString | read-only | This object indicates the module hardware version. |
| STR cienaCesModuleDescriptionMfgDate | 1.3.6.1.4.1.1271.2.1.2.1.2.2.1.6 | DisplayString | read-only | This object indicates the module manufacturing date. |
| cienaCesModuleDescriptionTable | 1.3.6.1.4.1.1271.2.1.2.1.2.2 | not-accessible | The (conceptual) table listing the description of physical attributes of the modules. | |
| I32 cienaCesModuleDescriptionTotalNumPorts | 1.3.6.1.4.1.1271.2.1.2.1.2.2.1.9 | Integer32 | read-only | This object indicates the number of ports on this module. |
| TIK cienaCesModuleDescriptionUpTime | 1.3.6.1.4.1.1271.2.1.2.1.2.2.1.8 | TimeTicks | read-only | This object indicates the module up time (in hundredths of a second) since the module was last re-initialized. |
| cienaCesModuleEntry | 1.3.6.1.4.1.1271.2.1.2.1.2.1.1 | not-accessible | An entry (conceptual row) in the cienaCesModuleTable. | |
| NTF cienaCesModuleFastReloadUnsuccessfulNotification | 1.3.6.1.4.1.1271.2.2.3.0.16 | This notification is sent when the deprov (cold switchover or failover) fails. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleHATrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleAdminState, and cienaCesModuleOperState. | ||
| cienaCesModuleGlobal | 1.3.6.1.4.1.1271.2.1.2.1.1 | |||
| CIE cienaCesModuleGlobalPostState | 1.3.6.1.4.1.1271.2.1.2.1.1.1 | CienaGlobalState | read-only | This object indicates the global POST state for the system. |
| NTF cienaCesModuleHASwitchOverNotification | 1.3.6.1.4.1.1271.2.2.3.0.10 | This notification is sent for CTM switchover. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleHATrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleSwitchOverReason, cienaCesModuleAdminState, and cienaCesModuleOperState. | ||
| TCE cienaCesModuleHealthCategory | 1.3.6.1.4.1.1271.2.1.2.1.3.3.1.1 | TceHealthCategory | accessible-for-notify | This object indicates the health category that the Health Manager monitors on the module. |
| STR cienaCesModuleHealthOriginName | 1.3.6.1.4.1.1271.2.1.2.1.3.3.1.6 | DisplayString | accessible-for-notify | This object indicates the origin name of the health status notification. |
| NUM cienaCesModuleHealthOriginType | 1.3.6.1.4.1.1271.2.1.2.1.3.3.1.5 | HealthOriginType | accessible-for-notify | This object indicates the origin of the health status notification. |
| U32 cienaCesModuleHealthOriginUnitId | 1.3.6.1.4.1.1271.2.1.2.1.3.3.1.7 | Unsigned32 | accessible-for-notify | This object indicates the origin id of the health notification. |
| TCE cienaCesModuleHealthStatus | 1.3.6.1.4.1.1271.2.1.2.1.3.3.1.3 | TceHealthStatus | accessible-for-notify | This object indicates the current health status of health category and its sub category being monitored on the module. |
| NTF cienaCesModuleHealthStatusDegradedNotification | 1.3.6.1.4.1.1271.2.2.3.0.5 | This notification is sent whenever the Health Manager detects a status change to degraded. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleTrapState for the module needs to be set to enabled. - cienaCesModuleAllModulesHealthTrapState needs to be set to enabled The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName, cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory, cienaCesModuleHealthSubCategory, cienaCesModuleHealthStatus, and cienaCesModuleHealthStatusLast. | ||
| NTF cienaCesModuleHealthStatusFaultedNotification | 1.3.6.1.4.1.1271.2.2.3.0.4 | This notification is sent whenever the Health Manager detects a status change to faulted. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleTrapState for the module needs to be set to enabled. - cienaCesModuleAllModulesHealthTrapState needs to be set to enabled The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName, cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory, cienaCesModuleHealthSubCategory, cienaCesModuleHealthStatus, and cienaCesModuleHealthStatusLast. | ||
| NTF cienaCesModuleHealthStatusGoodNotification | 1.3.6.1.4.1.1271.2.2.3.0.6 | This notification is sent whenever the Health Manager detects a status change to normal. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleTrapState for the module needs to be set to enabled. - cienaCesModuleAllModulesHealthTrapState needs to be set to enabled The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName, cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory, cienaCesModuleHealthSubCategory, cienaCesModuleHealthStatus, and cienaCesModuleHealthStatusLast. | ||
| TCE cienaCesModuleHealthStatusLast | 1.3.6.1.4.1.1271.2.1.2.1.3.3.1.4 | TceHealthStatus | accessible-for-notify | This object indicates the last known health status of health category and its sub category being monitored on the module. |
| NTF cienaCesModuleHealthStatusUnknownNotification | 1.3.6.1.4.1.1271.2.2.3.0.2 | This notification is sent whenever the Health Manager detects a status change to unknown. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleTrapState for the module needs to be set to enabled. - cienaCesModuleAllModulesHealthTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName, cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory, cienaCesModuleHealthSubCategory, cienaCesModuleHealthStatus, and cienaCesModuleHealthStatusLast. | ||
| NTF cienaCesModuleHealthStatusWarningNotification | 1.3.6.1.4.1.1271.2.2.3.0.3 | This notification is sent whenever the Health Manager detects a status change to warning. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleTrapState for the module needs to be set to enabled. - cienaCesModuleAllModulesHealthTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName, cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory, cienaCesModuleHealthSubCategory, cienaCesModuleHealthStatus, and cienaCesModuleHealthStatusLast. | ||
| U32 cienaCesModuleHealthSubCategory | 1.3.6.1.4.1.1271.2.1.2.1.3.3.1.2 | Unsigned32 | accessible-for-notify | This object indicates the health sub category that the Health Manager monitors on the module. |
| NTF cienaCesModuleHitlessModeUnsuccessfulNotification | 1.3.6.1.4.1.1271.2.2.3.0.17 | This notification is sent when the audit (hot failover or switchover) fails. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleHATrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleAdminState, and cienaCesModuleOperState. | ||
| STR cienaCesModuleIDPBarcode | 1.3.6.1.4.1.1271.2.1.2.1.2.8.1.9 | DisplayString | read-only | This object indicates the Barcode stored in the module IDP. |
| STR cienaCesModuleIDPCleiCode | 1.3.6.1.4.1.1271.2.1.2.1.2.8.1.8 | DisplayString | read-only | This object indicates the CLEI Code stored in the module IDP. |
| cienaCesModuleIDPEntry | 1.3.6.1.4.1.1271.2.1.2.1.2.8.1 | not-accessible | An entry (conceptual row) in the cienaCesModuleIDPTable. | |
| MAC cienaCesModuleIDPEthBaseMac | 1.3.6.1.4.1.1271.2.1.2.1.2.8.1.1 | MacAddress | read-only | This object indicates the module Ethernet Base MAC address stored in the module IDP. |
| I32 cienaCesModuleIDPEthBaseMacRange | 1.3.6.1.4.1.1271.2.1.2.1.2.8.1.2 | Integer32 | read-only | This object indicates the Ethernet MAC address range stored in the module IDP. |
| I32 cienaCesModuleIDPFTC | 1.3.6.1.4.1.1271.2.1.2.1.2.8.1.11 | Integer32 | read-only | This object indicates the Functional Test Count stored in the module IDP. |
| STR cienaCesModuleIDPMfgDate | 1.3.6.1.4.1.1271.2.1.2.1.2.8.1.7 | DisplayString | read-only | This object indicates the Manufactured Date stored in the module IDP. |
| STR cienaCesModuleIDPModelPartNumber | 1.3.6.1.4.1.1271.2.1.2.1.2.8.1.4 | DisplayString | read-only | This object indicates the Model Part Number stored in the module IDP. |
| STR cienaCesModuleIDPModelRevision | 1.3.6.1.4.1.1271.2.1.2.1.2.8.1.5 | DisplayString | read-only | This object indicates the Model Revision stored in the module IDP. |
| STR cienaCesModuleIDPModuleSerialNumber | 1.3.6.1.4.1.1271.2.1.2.1.2.8.1.3 | DisplayString | read-only | This object indicates the Module Serial Number stored in the module IDP. |
| STR cienaCesModuleIDPProductID | 1.3.6.1.4.1.1271.2.1.2.1.2.8.1.6 | DisplayString | read-only | This object indicates the Module Product ID stored in the module IDP. |
| I32 cienaCesModuleIDPSWCompat | 1.3.6.1.4.1.1271.2.1.2.1.2.8.1.10 | Integer32 | read-only | This object indicates the Software Compatibility Number stored in the module IDP. |
| cienaCesModuleIDPTable | 1.3.6.1.4.1.1271.2.1.2.1.2.8 | not-accessible | The (conceptual) table listing the description of ID Prom contents of the modules. | |
| INT cienaCesModuleLastRebootReason | 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.11 | INTEGER | read-only | This object indicates the last reboot reason of the module. |
| cienaCesModuleMIB | 1.3.6.1.4.1.1271.2.1.2 | This module defines the module configuration objects and also the objects required for module related notifications. | ||
| cienaCesModuleMIBCompliances | 1.3.6.1.4.1.1271.2.1.2.2.1 | |||
| cienaCesModuleMIBGroups | 1.3.6.1.4.1.1271.2.1.2.2.2 | |||
| cienaCesModuleMIBNotificationPrefix | 1.3.6.1.4.1.1271.2.2.3 | |||
| cienaCesModuleMIBNotifications | 1.3.6.1.4.1.1271.2.2.3.0 | |||
| cienaCesModuleMIBObjects | 1.3.6.1.4.1.1271.2.1.2.1 | |||
| STR cienaCesModuleModel | 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.4 | DisplayString | read-only | This object indicates the module model. |
| cienaCesModuleNotifAttrs | 1.3.6.1.4.1.1271.2.1.2.1.3 | |||
| cienaCesModuleNotifEntry | 1.3.6.1.4.1.1271.2.1.2.1.3.3.1 | not-accessible | An entry (conceptual row) in the cienaCesModuleNotifEntryTable. | |
| cienaCesModuleNotifTable | 1.3.6.1.4.1.1271.2.1.2.1.3.3 | not-accessible | The (conceptual) table to define the notification variable bindings. | |
| CIE cienaCesModuleOperPostState | 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.13 | CienaGlobalState | read-only | This object indicates the POST operational state for the given module. |
| INT cienaCesModuleOperState | 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.8 | INTEGER | read-only | This object indicates the operational state of the module. |
| OCT cienaCesModulePOSTErrorDescription | 1.3.6.1.4.1.1271.2.1.2.1.2.5.1.2 | OCTET STRING | read-only | A description of the module POST error. |
| cienaCesModulePOSTErrorEntry | 1.3.6.1.4.1.1271.2.1.2.1.2.5.1 | not-accessible | An entry (conceptual row) in the cienaCesModulePOSTErrorResultsTable. | |
| INT cienaCesModulePOSTErrorIndex | 1.3.6.1.4.1.1271.2.1.2.1.2.5.1.1 | INTEGER | not-accessible | Index of the POST error for the module. |
| NTF cienaCesModulePostErrorNotification | 1.3.6.1.4.1.1271.2.2.3.0.15 | This notification is sent when a module POST error is detected. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModulePOSTErrorTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, and cienaCesModulePOSTErrorDescription. | ||
| INT cienaCesModulePOSTErrorScope | 1.3.6.1.4.1.1271.2.1.2.1.2.5.1.4 | INTEGER | read-only | Scope of the POST error for the module. |
| INT cienaCesModulePOSTErrorSeverity | 1.3.6.1.4.1.1271.2.1.2.1.2.5.1.3 | INTEGER | read-only | Severity of the POST error for the module. |
| cienaCesModulePOSTErrorTable | 1.3.6.1.4.1.1271.2.1.2.1.2.5 | not-accessible | The (conceptual) table for viewing POST error on the modules. | |
| INT cienaCesModulePOSTScopeIndex | 1.3.6.1.4.1.1271.2.1.2.1.2.5.1.5 | INTEGER | read-only | When scope is a port this object identifies the port number. |
| NTF cienaCesModuleProtectionModeColdNotification | 1.3.6.1.4.1.1271.2.2.3.0.11 | This notification is sent when the protection mode of the system changes to cold. A COLD protection level is the lowest level of protection. It implies that the secondary CTM is ready to assume the function of the primary CTM but a failure causing a failover would be service impacting. The secondary CTM has been synchronized with the same software package, configuration files, etc such that it will return the same state as the previous primary CTM. The protection state of the primary CTM shall not transition from NONE to PROTECTED until the secondary CTM has completed the synchronization. In the case of a failure on the primary CTM, the secondary CTM will immediately assume primary status, finish its initialization and reboot the PSLMs. The primary CTM will reapply the configuration to the PSLMs after they have booted. Any unsaved configuration changes will NOT be lost on a failover as configuration changes are propagated to the secondary CTM configuration. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleProtectionModeTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, and cienaCesModuleSystemProtectionMode. | ||
| NTF cienaCesModuleProtectionModeHotNotification | 1.3.6.1.4.1.1271.2.2.3.0.14 | This notification is sent when the protection mode of the system changes to hot. A HOT protection level is the highest level of protection. It implies that the secondary CTM is ready to assume the function of the primary CTM and a failure causing a failover would NOT be service impacting. The secondary CTM has been synchronized with the same software package, configuration files, etc such that it will return the same state as the previous primary CTM. The protection state of the primary CTM shall not transition from NONE to PROTECTED until the secondary CTM has completed the synchronization. In the case of a failure on the primary CTM, the secondary CTM will immediately assume primary status, finish its initialization and audit the PSLMs. All current established traffic patterns will be maintained with a minimal loss of traffic. Any unsaved configuration changes will NOT be lost on a failover as configuration changes are propagated to the secondary CTM configuration. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleProtectionModeTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, and cienaCesModuleSystemProtectionMode. | ||
| NTF cienaCesModuleProtectionModeUnprotectedNotification | 1.3.6.1.4.1.1271.2.2.3.0.13 | This notification is sent when the protection mode of the system changes to unprotected. A protection level of unprotected implies that there is no secondary CTM present in the system or that the current secondary CTM is not in a state to provide any protection. In the case of the CTM failure, the primary CTM will reboot and subsequently reboot all the PSLMs, causing loss of existing switched traffic patterns. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleProtectionModeTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, and cienaCesModuleSystemProtectionMode. | ||
| NTF cienaCesModuleProtectionModeWarmNotification | 1.3.6.1.4.1.1271.2.2.3.0.12 | This notification is sent when the protection mode of the system changes to warm. This state is not supported on the 5410 platform. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleProtectionModeTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, and cienaCesModuleSystemProtectionMode. | ||
| INT cienaCesModuleProtectionRole | 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.9 | INTEGER | read-only | This object indicates the redundant administrative state of the module. |
| U32 cienaCesModuleResourceDeviceIndx | 1.3.6.1.4.1.1271.2.1.2.1.2.6.1.2 | Unsigned32 | not-accessible | Index of the device being monitored. |
| U32 cienaCesModuleResourceHealthCurrMeasurement | 1.3.6.1.4.1.1271.2.1.2.1.2.6.1.4 | Unsigned32 | read-only | Current value of the dataplane resource being monitored. |
| cienaCesModuleResourceHealthEntry | 1.3.6.1.4.1.1271.2.1.2.1.2.6.1 | not-accessible | An entry in the cienaCesModuleResourceHealthTable. | |
| U32 cienaCesModuleResourceHealthMaxMeasurement | 1.3.6.1.4.1.1271.2.1.2.1.2.6.1.5 | Unsigned32 | read-only | The maximum recorded value of the dataplane resource being monitored. |
| U32 cienaCesModuleResourceHealthMaxThreshold | 1.3.6.1.4.1.1271.2.1.2.1.2.6.1.6 | Unsigned32 | read-only | The maximum possible value for the dataplane resource being monitored. |
| TCE cienaCesModuleResourceHealthState | 1.3.6.1.4.1.1271.2.1.2.1.2.6.1.3 | TceHealthStatus | read-only | Health state of the dataplane resource being monitored. |
| INT cienaCesModuleResourceHealthSubCategory | 1.3.6.1.4.1.1271.2.1.2.1.2.6.1.1 | INTEGER | not-accessible | The sub-category of the dataplane resource being monitored. - 'none' is an enumeration placeholder. |
| cienaCesModuleResourceHealthTable | 1.3.6.1.4.1.1271.2.1.2.1.2.6 | not-accessible | Table listing the health information of dataplane resources. | |
| I32 cienaCesModuleSensorCurrentTemp | 1.3.6.1.4.1.1271.2.1.2.1.2.3.1.3 | Integer32 | read-only | This object indicates the current temperature of the module. |
| STR cienaCesModuleSensorDescription | 1.3.6.1.4.1.1271.2.1.2.1.2.3.1.2 | DisplayString | read-only | This object indicates the sensor description. |
| I32 cienaCesModuleSensorHighTemp | 1.3.6.1.4.1.1271.2.1.2.1.2.3.1.4 | Integer32 | read-only | This object indicates the highest temperature this module has reached since the last reboot. |
| NTF cienaCesModuleSensorHighTempNotification | 1.3.6.1.4.1.1271.2.2.3.0.7 | This notification is sent when the cienaCesModuleSensor temperature exceeds the high temperature threshold for the module. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleSensorTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleSensorNotifIndx, cienaCesModuleSensorDescription, cienaCesModuleSensorCurrentTemp, and cienaCesModuleSensorHighTempThreshold. | ||
| I32 cienaCesModuleSensorHighTempThreshold | 1.3.6.1.4.1.1271.2.1.2.1.2.3.1.6 | Integer32 | read-only | This object indicates the high threshold for this module temperature. |
| I32 cienaCesModuleSensorIndx | 1.3.6.1.4.1.1271.2.1.2.1.2.3.1.1 | Integer32 | not-accessible | This object indicates the unique index in the table along with cienaCesModuleIndx. |
| I32 cienaCesModuleSensorLowTemp | 1.3.6.1.4.1.1271.2.1.2.1.2.3.1.5 | Integer32 | read-only | This object indicates the lowest temperature this module has reached since the last reboot |
| NTF cienaCesModuleSensorLowTempNotification | 1.3.6.1.4.1.1271.2.2.3.0.8 | This notification is sent when the cienaCesModuleSensor falls below the low temperature threshold for the module. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleSensorTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleSensorNotifIndx, cienaCesModuleSensorDescription, cienaCesModuleSensorCurrentTemp, and cienaCesModuleSensorLowTempThreshold. | ||
| I32 cienaCesModuleSensorLowTempThreshold | 1.3.6.1.4.1.1271.2.1.2.1.2.3.1.7 | Integer32 | read-only | This object indicates the low threshold for this module temperature. |
| NTF cienaCesModuleSensorNormalTempNotification | 1.3.6.1.4.1.1271.2.2.3.0.9 | This notification is sent if the cienaCesModule temperature changes from previously reported high or low temperature exceeding thresholds to normal temperature. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleSensorTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleSensorNotifIndx, cienaCesModuleSensorDescription, cienaCesModuleSensorCurrentTemp, cienaCesModuleSensorLowTemp, and cienaCesModuleSensorHighTemp. | ||
| I32 cienaCesModuleSensorNotifIndx | 1.3.6.1.4.1.1271.2.1.2.1.2.3.1.8 | Integer32 | accessible-for-notify | This object indicates the unique index in the table used for trap definition. |
| U32 cienaCesModuleShelfIndx | 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.2 | Unsigned32 | not-accessible | This object indicates the shelf index for the module. |
| U32 cienaCesModuleShelfNotifIndx | 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.18 | Unsigned32 | accessible-for-notify | This object indicates the shelf index for the module used in trap definition. |
| U32 cienaCesModuleSlotIndx | 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.3 | Unsigned32 | not-accessible | This object indicates the slot index for the module. |
| STR cienaCesModuleSlotName | 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.20 | DisplayString | read-only | This object indicates the slot name that the module is installed in. |
| U32 cienaCesModuleSlotNotifIndx | 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.19 | Unsigned32 | accessible-for-notify | This object indicates the slot index for the module used in trap definition. |
| INT cienaCesModuleStandbyStatus | 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.10 | INTEGER | read-only | This object indicates the standby status of the module. |
| NTF cienaCesModuleStateChangeNotification | 1.3.6.1.4.1.1271.2.2.3.0.1 | A cienaCesModuleStateChange notification is sent when the operational state of the module is changed. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleTrapState for the module needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleAdminState, and cienaCesModuleOperState. | ||
| SWP cienaCesModuleSwBank0KernelStatus | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.11 | SwPkgStatus | read-only | Bank0 kernel software status. |
| STR cienaCesModuleSwBank0KernelVersion | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.10 | DisplayString | read-only | Bank0 kernel version. |
| SWP cienaCesModuleSwBank0UbootStatus | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.15 | SwPkgStatus | read-only | Bank0 U-boot status. |
| STR cienaCesModuleSwBank0UbootVersion | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.14 | DisplayString | read-only | Bank0 U-boot version. |
| SWP cienaCesModuleSwBank1KernelStatus | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.13 | SwPkgStatus | read-only | Bank1 kernel status. |
| STR cienaCesModuleSwBank1KernelVersion | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.12 | DisplayString | read-only | Bank1 kernel version. |
| SWP cienaCesModuleSwBank1UbootStatus | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.17 | SwPkgStatus | read-only | Bank0 U-boot status. |
| STR cienaCesModuleSwBank1UbootVersion | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.16 | DisplayString | read-only | Bank1 U-boot version. |
| cienaCesModuleSwEntry | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1 | not-accessible | An entry (conceptual row) in the cienaCesModuleSwTable. | |
| NTF cienaCesModuleSwitchFabricDisruptedRecoverableNotification | 1.3.6.1.4.1.1271.2.2.3.0.19 | This notification is sent when the switch fabric detects game-over failure and the system can automatically correct it. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled - cienaCesModuleSwitchFabricDisruptedTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, and cienaCesModuleSlotNotifIndx. | ||
| NTF cienaCesModuleSwitchFabricDisruptedUnrecoverableNotification | 1.3.6.1.4.1.1271.2.2.3.0.18 | This notification is sent when the switch fabric detects a game-over failure and the system cannot automatically correct without resetting certain fabric subsystems. This kind of a disruption can cause a major service interruption. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled - cienaCesModuleSwitchFabricDisruptedTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, and cienaCesModuleSlotNotifIndx. | ||
| INT cienaCesModuleSwitchOverReason | 1.3.6.1.4.1.1271.2.1.2.1.3.2 | INTEGER | accessible-for-notify | This object indicates the reason the SwitchOver happened. The following combinations determine the value of this object: CTM failure - Deprov mode - Cold FailOver User Initiated - Deprov Mode - Cold SwitchOver CTM failure - Audit mode - Hot FailOver User initiated - Audit mode - Hot SwitchOver. |
| STR cienaCesModuleSwMIBVer | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.20 | DisplayString | read-only | This MIB object shows the MIB version currently supported. |
| STR cienaCesModuleSwReleasePartition0Pkg | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.4 | DisplayString | read-only | Release partition 0 software package version. |
| SWP cienaCesModuleSwReleasePartition0PkgStatus | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.5 | SwPkgStatus | read-only | Release partition 0 software package status. |
| STR cienaCesModuleSwReleasePartition1Pkg | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.6 | DisplayString | read-only | Release partition 1 software package version. |
| SWP cienaCesModuleSwReleasePartition1PkgStatus | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.7 | SwPkgStatus | read-only | Release partition 1 software package status. |
| STR cienaCesModuleSwReleasePartition2Pkg | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.8 | DisplayString | read-only | Release partition 2 software package version. |
| SWP cienaCesModuleSwReleasePartition2PkgStatus | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.9 | SwPkgStatus | read-only | Release partition 2 software package status. |
| STR cienaCesModuleSwRunningRelease | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.2 | DisplayString | read-only | Software package version that is currently running on the module. |
| U32 cienaCesModuleSwRunningReleasePartition | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.3 | Unsigned32 | read-only | Release partition where the current running release is installed. |
| SWM cienaCesModuleSwState | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.1 | SwModuleState | read-only | The software state on the module. |
| cienaCesModuleSwTable | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2 | not-accessible | The (conceptual) table listing the software package attributes on the modules. | |
| SWP cienaCesModuleSwUbootGoldStatus | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.19 | SwPkgStatus | read-only | U-boot Gold status. |
| STR cienaCesModuleSwUbootGoldVersion | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.18 | DisplayString | read-only | U-boot Gold version. |
| INT cienaCesModuleSystemProtectionMode | 1.3.6.1.4.1.1271.2.1.2.1.3.1 | INTEGER | accessible-for-notify | This object indicates the protection mode of the system. |
| cienaCesModuleTable | 1.3.6.1.4.1.1271.2.1.2.1.2.1 | not-accessible | The (conceptual) table listing the modules configured and detected. | |
| cienaCesModuleTempSensorEntry | 1.3.6.1.4.1.1271.2.1.2.1.2.3.1 | not-accessible | An entry (conceptual row) in the cienaCesModuleTempSensorTable. | |
| cienaCesModuleTempSensorTable | 1.3.6.1.4.1.1271.2.1.2.1.2.3 | not-accessible | The (conceptual) table listing the temperature sensors of the modules. | |
| CIE cienaCesModuleTrapState | 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.16 | CienaGlobalState | read-write | This object indicates whether the device generates notifications for this module. |
| INT cienaCesModuleType | 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.5 | INTEGER | read-only | This object indicates whether this is a single module, control timing module, I/O module or fabric module. |
| cienaCesSwModule | 1.3.6.1.4.1.1271.2.1.2.1.2.4 | |||
| moduleConfigGroup | 1.3.6.1.4.1.1271.2.1.2.2.2.1 | A collection of objects providing information about configuration table. | ||
| moduleDescriptionGroup | 1.3.6.1.4.1.1271.2.1.2.2.2.2 | A collection of objects providing information about module capabilities. | ||
| moduleNotifGroup | 1.3.6.1.4.1.1271.2.1.2.2.2.4 | A collection of objects providing information about module notifications. | ||
| modulePostErrorGroup | 1.3.6.1.4.1.1271.2.1.2.2.2.5 | A collection of objects providing information of module POST errors. | ||
| moduleSensorGroup | 1.3.6.1.4.1.1271.2.1.2.2.2.3 | A collection of objects providing information of module temperature sensors. |
RFC description
Manages Ciena module configuration, health status, and module-related notifications in transport equipment.
Start monitoring Ciena Carrier Ethernet switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.